Commit Graph

244 Commits

Author SHA1 Message Date
David S. Miller 3503e0acbf Revert "ide: improve handling of Power Management requests"
This reverts commit a1317f714a.
2009-07-06 12:39:27 -07:00
Bartlomiej Zolnierkiewicz 5e955245d6 ide: always kill the whole request on error
* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_kill_rq()
  and ide_floppy_do_request() for failed requests.
  [ bugfix part ]

* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_do_devset()
  and ide_complete_drive_reset().  Then remove ide_rq_bytes().
  [ cleanup part ]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 23:57:16 -07:00
Bartlomiej Zolnierkiewicz 789547508f ide: fix ide_kill_rq() for special ide-{floppy,tape} driver requests
Such requests should be failed with -EIO (like all other requests
in this function) instead of being completed successfully.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 23:57:14 -07:00
Bartlomiej Zolnierkiewicz a1317f714a ide: improve handling of Power Management requests
Make hwif->rq point to PM request during PM sequence and do not allow
any other types of requests to slip in (the old comment was never correct
as there should be no such requests generated during PM sequence).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:33 -07:00
Sergei Shtylyov f4d3ffa52a ide: move ack_intr() method into 'struct ide_port_ops' (take 2)
Move the ack_intr() method into 'struct ide_port_ops', also renaming it to
test_irq() while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:58 +02:00
Sergei Shtylyov eba8999cef ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2)
There are now two methods that clear the port interrupt: ack_intr() method,
implemented only on M680x0 machines, that is called at the start of ide_intr(),
and clear_irq() method, that is called somewhat later in this function.  In
order to stop this duplication, delegate the task of clearing the interrupt
to clear_irq() method, only leaving to ack_intr() the task of testing for the
port interrupt.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:57 +02:00
Sergei Shtylyov 53b987d5e7 ide: call clear_irq() method in ide_timer_expiry()
Now the clear_irq() method is called only from ide_intr() but ide_timer_expiry()
also should call this method in case when drive_is_ready() succeeds...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:55 +02:00
Linus Torvalds d614aec475 Merge branch 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits)
  ide: re-implement ide_pci_init_one() on top of ide_pci_init_two()
  ide: unexport ide_find_dma_mode()
  ide: fix PowerMac bootup oops
  ide: skip probe if there are no devices on the port (v2)
  sl82c105: add printk() logging facility
  ide-tape: fix proc warning
  ide: add IDE_DFLAG_NIEN_QUIRK device flag
  ide: respect quirk_drives[] list on all controllers
  hpt366: enable all quirks for devices on quirk_drives[] list
  hpt366: sync quirk_drives[] list with pdc202xx_{new,old}.c
  ide: remove superfluous SELECT_MASK() call from do_rw_taskfile()
  ide: remove superfluous SELECT_MASK() call from ide_driveid_update()
  icside: remove superfluous ->maskproc method
  ide-tape: fix IDE_AFLAG_* atomic accesses
  ide-tape: change IDE_AFLAG_IGNORE_DSC non-atomically
  pdc202xx_old: kill resetproc() method
  pdc202xx_old: don't call pdc202xx_reset() on IRQ timeout
  pdc202xx_old: use ide_dma_test_irq()
  ide: preserve Host Protected Area by default (v2)
  ide-gd: implement block device ->set_capacity method (v2)
  ...
2009-06-12 09:29:42 -07:00
Bartlomiej Zolnierkiewicz 734affdcae ide: add IDE_DFLAG_NIEN_QUIRK device flag
Add IDE_DFLAG_NIEN_QUIRK device flag and use it instead of
drive->quirk_list.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:10 +02:00
Jens Axboe 9bd7de51ee Merge branch 'master' into for-2.6.31
Conflicts:
	drivers/ide/ide-io.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 20:28:35 +02:00
Bartlomiej Zolnierkiewicz 4c9773ed79 Merge branch 'for-linus' into for-next 2009-05-22 17:10:55 +02:00
Bartlomiej Zolnierkiewicz e3b29f0512 ide: fix OOPS during ide-cd error recovery
On Tuesday 19 May 2009 20:29:28 Martin Lottermoser wrote:

>   hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 }
>   ide: failed opcode was: unknown
>   hdc: DMA disabled
>   ------------[ cut here ]------------
>   kernel BUG at drivers/ide/ide-io.c:872!

It is possible for ide-cd to ignore ide_error()'s return value under
some circumstances.  Workaround it in ide_intr() and ide_timer_expiry()
by checking if there is a device/port reset pending currently.

Fixes bug #13345:

	http://bugzilla.kernel.org/show_bug.cgi?id=13345

Reported-by: Martin Lottermoser <Martin.Lottermoser@t-online.de>
Reported-and-tested-by: Modestas Vainius <modestas@vainius.eu>
Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22 16:23:37 +02:00
Bartlomiej Zolnierkiewicz ca1b96e00a ide: replace special_t typedef by IDE_SFLAG_* flags
Replace:
- special_t typedef by IDE_SFLAG_* flags
- 'special_t special' ide_drive_t's field by 'u8 special_flags' one

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:21 +02:00
Bartlomiej Zolnierkiewicz 582078ee3d ide: merge ide_disk_special() into do_special() (v2)
While at it:
- change debug printk() level to KERN_DEBUG and use __func__
- update documentation

v2:
- fix DEBUG build (noticed by Sergei)

There should be no functional changes caused by this patch.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:18 +02:00
Bartlomiej Zolnierkiewicz 5f582c8e21 ide: BUG() on unknown flags in ide_disk_special()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:18 +02:00
Tejun Heo 9934c8c045 block: implement and enforce request peek/start/fetch
Till now block layer allowed two separate modes of request execution.
A request is always acquired from the request queue via
elv_next_request().  After that, drivers are free to either dequeue it
or process it without dequeueing.  Dequeue allows elv_next_request()
to return the next request so that multiple requests can be in flight.

Executing requests without dequeueing has its merits mostly in
allowing drivers for simpler devices which can't do sg to deal with
segments only without considering request boundary.  However, the
benefit this brings is dubious and declining while the cost of the API
ambiguity is increasing.  Segment based drivers are usually for very
old or limited devices and as converting to dequeueing model isn't
difficult, it doesn't justify the API overhead it puts on block layer
and its more modern users.

Previous patches converted all block low level drivers to dequeueing
model.  This patch completes the API transition by...

* renaming elv_next_request() to blk_peek_request()

* renaming blkdev_dequeue_request() to blk_start_request()

* adding blk_fetch_request() which is combination of peek and start

* disallowing completion of queued (not started) requests

* applying new API to all LLDs

Renamings are for consistency and to break out of tree code so that
it's apparent that out of tree drivers need updating.

[ Impact: block request issue API cleanup, no functional change ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: unsik Kim <donari75@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Laurent Vivier <Laurent@lvivier.info>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:52:18 +02:00
Tejun Heo 8f6205cd57 ide: dequeue in-flight request
ide generally has single request in flight and tracks it using
hwif->rq and all state handlers follow the following convention.

* ide_started is returned if the request is in flight.

* ide_stopped is returned if the queue needs to be restarted.  The
  request might or might not have been processed fully or partially.

* hwif->rq is set to NULL, when an issued request completes.

So, dequeueing model can be implemented by dequeueing after fetch,
requeueing if hwif->rq isn't NULL on ide_stopped return and doing
about the same thing on completion / port unlock paths.  These changes
can be made in ide-io proper.

In addition to the above main changes, the following updates are
necessary.

* ide-cd shouldn't dequeue a request when issuing REQUEST SENSE for it
  as the request is already dequeued.

* ide-atapi uses request queue as stack when issuing REQUEST SENSE to
  put the REQUEST SENSE in front of the failed request.  This now
  needs to be done using requeueing.

[ Impact: dequeue in-flight request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:52:14 +02:00
Tejun Heo 34b7d2c957 ide: cleanup rq->data_len usages
With recent unification of fields, it's now guaranteed that
rq->data_len always equals blk_rq_bytes().  Convert all direct users
to accessors.

[ Impact: convert direct rq->data_len usages to blk_rq_bytes() ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:55 +02:00
Tejun Heo 9780e2dd82 ide: convert to rq pos and nr_sectors accessors
ide doesn't manipulate request fields anymore and thus all hard and
their soft equivalents are always equal.  Convert all references to
accessors.

[ Impact: use pos and nr_sectors accessors ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:54 +02:00
Tejun Heo 5b93629b45 block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
Implement accessors - blk_rq_pos(), blk_rq_sectors() and
blk_rq_cur_sectors() which return rq->hard_sector, rq->hard_nr_sectors
and rq->hard_cur_sectors respectively and convert direct references of
the said fields to the accessors.

This is in preparation of request data length handling cleanup.

Geert	: suggested adding const to struct request * parameter to accessors
Sergei	: spotted error in patch description

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Ackec-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:53 +02:00
Tejun Heo 5ad960fe8d ide: drop rq->data handling from ide_map_sg()
Impact: remove code path which is no longer necessary

All IDE data transfers now use rq->bio.  Simplify ide_map_sg()
accordingly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-28 07:37:32 +02:00
Tejun Heo 765139ef5f ide-pm: don't abuse rq->data
Impact: cleanup rq->data usage

ide-pm uses rq->data to carry pointer to struct request_pm_state
through request queue and rq->special is used to carray pointer to
local struct ide_cmd, which isn't necessary.  Use rq->special for
request_pm_state instead and use local ide_cmd in
ide_start_power_step().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-28 07:37:30 +02:00
Tejun Heo 02e7cf8f84 ide-cd,atapi: use bio for internal commands
Impact: unify request data buffer handling

rq->data is used mostly to pass kernel buffer through request queue
without using bio.  There are only a couple of places which still do
this in kernel and converting to bio isn't difficult.

This patch converts ide-cd and atapi to use bio instead of rq->data
for request sense and internal pc commands.  With previous change to
unify sense request handling, this is relatively easily achieved by
adding blk_rq_map_kern() during sense_rq prep and PC issue.

If blk_rq_map_kern() fails for sense, the error is deferred till sense
issue and aborts the failed command which triggered the sense.  Note
that this is a slim possibility as sense prep is done on each command
issue, so for the above condition to actually trigger, all preps since
the last sense issue till the issue of the request which would require
a sense should fail.

* do_request functions might sleep now.  This should be okay as ide
  request_fn - do_ide_request() - is invoked only from make_request
  and plug work.  Make sure this is the case by adding might_sleep()
  to do_ide_request().

* Functions which access the read sense data before the sense request
  is complete now should access bio_data(sense_rq->bio) as the sense
  buffer might have been copied during blk_rq_map_kern().

* ide-tape updated to map sg.

* cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC
  special case.  Simplified.

* tp_ops->output/input_data path dropped from ide_pc_intr().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:30 +02:00
Tejun Heo d868ca2430 ide-taskfile: don't abuse rq->buffer
Impact: rq->buffer usage cleanup

ide_raw_taskfile() directly uses rq->buffer to carry pointer to the
data buffer.  This complicates both block interface and ide backend
request handling.  Use blk_rq_map_kern() instead and drop special
handling for REQ_TYPE_ATA_TASKFILE from ide_map_sg().

Note that REQ_RW setting is moved upwards as blk_rq_map_kern() uses it
to initialize bio rw flag.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-28 07:37:29 +02:00
Tejun Heo 2c316bb57a ide: drop rq->data handling from ide_map_sg()
Impact: remove code path which is no longer necessary

All IDE data transfers now use rq->bio.  Simplify ide_map_sg()
accordingly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-19 08:46:03 +09:00
Tejun Heo fc38b521dc ide-pm: don't abuse rq->data
Impact: cleanup rq->data usage

ide-pm uses rq->data to carry pointer to struct request_pm_state
through request queue and rq->special is used to carray pointer to
local struct ide_cmd, which isn't necessary.  Use rq->special for
request_pm_state instead and use local ide_cmd in
ide_start_power_step().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-19 07:00:43 +09:00
Tejun Heo 5c4be57249 ide-cd,atapi: use bio for internal commands
Impact: unify request data buffer handling

rq->data is used mostly to pass kernel buffer through request queue
without using bio.  There are only a couple of places which still do
this in kernel and converting to bio isn't difficult.

This patch converts ide-cd and atapi to use bio instead of rq->data
for request sense and internal pc commands.  With previous change to
unify sense request handling, this is relatively easily achieved by
adding blk_rq_map_kern() during sense_rq prep and PC issue.

If blk_rq_map_kern() fails for sense, the error is deferred till sense
issue and aborts the failed command which triggered the sense.  Note
that this is a slim possibility as sense prep is done on each command
issue, so for the above condition to actually trigger, all preps since
the last sense issue till the issue of the request which would require
a sense should fail.

* do_request functions might sleep now.  This should be okay as ide
  request_fn - do_ide_request() - is invoked only from make_request
  and plug work.  Make sure this is the case by adding might_sleep()
  to do_ide_request().

* Functions which access the read sense data before the sense request
  is complete now should access bio_data(sense_rq->bio) as the sense
  buffer might have been copied during blk_rq_map_kern().

* ide-tape updated to map sg.

* cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC
  special case.  Simplified.

* tp_ops->output/input_data path dropped from ide_pc_intr().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 07:00:42 +09:00
Tejun Heo eace4cb04c ide-taskfile: don't abuse rq->buffer
Impact: rq->buffer usage cleanup

ide_raw_taskfile() directly uses rq->buffer to carry pointer to the
data buffer.  This complicates both block interface and ide backend
request handling.  Use blk_rq_map_kern() instead and drop special
handling for REQ_TYPE_ATA_TASKFILE from ide_map_sg().

Note that REQ_RW setting is moved upwards as blk_rq_map_kern() uses it
to initialize bio rw flag.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-04-19 07:00:42 +09:00
Bartlomiej Zolnierkiewicz f505d49ffd ide: fix barriers support
Freeing non-slab objects is bad and results in an oops.  Fix it.

Reported-and-tested-by: Andrew Price <andy@andrewprice.me.uk>
Cc: Theodore Tso <tytso@mit.edu>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18 17:42:20 +02:00
Sergei Shtylyov 3153c26b54 ide: refactor tf_read() method
Simplify tf_read() method, making it deal only with 'struct ide_taskfile' and
the validity flags that the upper layer passes, and factoring out the code that
deals with the high order bytes into ide_tf_readback() to be called from the
only two functions interested, ide_complete_cmd() and ide_dump_sector().

This should stop the needless code duplication in this method and so make
it about twice smaller than it was; along with simplifying the setup for
the method call, this should save both time and space...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:03 +02:00
Sergei Shtylyov 745483f10c ide: simplify 'struct ide_taskfile'
Make 'struct ide_taskfile' cover only 8 register values and thus put two such
fields ('tf' and 'hob') into 'struct ide_cmd', dropping unnecessary 'tf_array'
field from it.

This required changing the prototype of ide_get_lba_addr() and ide_tf_dump().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: fix setting of ATA_LBA bit for LBA48 commands in __ide_do_rw_disk()]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:02 +02:00
Sergei Shtylyov 60f85019c6 ide: replace IDE_TFLAG_* flags by IDE_VALID_*
Replace IDE_TFLAG_{IN|OUT}_* flags meaning to the taskfile register validity on
input/output by the IDE_VALID_* flags and introduce 4 symmetric 8-bit register
validity indicator subfields, 'valid.{input/output}.{tf|hob}', into the 'struct
ide_cmd' instead of using the 'tf_flags' field for that purpose (this field can
then be turned from 32-bit into 8-bit one).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:01 +02:00
Sergei Shtylyov fdd88f0af6 ide: inline SELECT_DRIVE()
Since SELECT_DRIVE() has boiled down to a mere dev_select() method call, it now
makes sense to just inline it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:33 +02:00
Sergei Shtylyov 35218d1ca8 ide: move data register access out of tf_{read|load}() methods (take 2)
Move IDE_FTFLAG_{IN|OUT}_DATA flag handling out of tf_{read|load}() methods
into the only two functions where these flags actually need to be handled:
do_rw_taskfile() and ide_complete_cmd()...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:31 +02:00
Sergei Shtylyov ecf3a31d2a ide: turn set_irq() method into write_devctl() method
Turn set_irq() method with its software reset hack into write_devctl() method
(for just writing a value into the device control register) at last...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:30 +02:00
Elias Oltmanns 9010941c54 ide: Fix code dealing with sleeping devices in do_ide_request()
Unfortunately, I missed a catch when reviewing the patch committed as
201bffa4. Here is the fix to the currently broken handling of sleeping
devices. In particular, this is required to get the disk shock
protection code working again.

Reported-by: Christian Thaeter <ct@pipapo.org>
Cc: stable@kernel.org
Signed-off-by: Elias Oltmanns <eo@nebensachen.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:14:56 +02:00
Bartlomiej Zolnierkiewicz bf717c0a2e ide: keep track of number of bytes instead of sectors in struct ide_cmd
* Pass number of bytes instead of sectors to ide_init_sg_cmd().

* Pass number of bytes to process to ide_pio_sector() and rename
  it to ide_pio_bytes().

* Rename ->nsect field to ->nbytes in struct ide_cmd and use
  ->nbytes, ->nleft and ->cursg_ofs to keep track of number of
  bytes instead of sectors.

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:47 +01:00
Bartlomiej Zolnierkiewicz 60c0cd02b2 ide: set hwif->expiry prior to calling [__]ide_set_handler()
* Set hwif->expiry prior to calling [__]ide_set_handler()
  and drop 'expiry' argument.

* Set hwif->expiry to NULL in ide_{timer_expiry,intr}()
  and remove 'hwif->expiry = NULL' assignments.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:46 +01:00
Bartlomiej Zolnierkiewicz 2298169418 ide: pass command to ide_map_sg()
* Set IDE_TFLAG_WRITE flag and ->rq also for ATA_CMD_PACKET
  commands.

* Pass command to ->dma_setup method and update all its
  implementations accordingly.

* Pass command instead of request to ide_build_sglist(),
  *_build_dmatable() and ide_map_sg().

While at it:

* Fix scc_dma_setup() documentation + use ATA_DMA_WR define.

* Rename sgiioc4_build_dma_table() to sgiioc4_build_dmatable(),
  change return value type to 'int' and drop unused 'ddir'
  argument.

* Do some minor cleanups in [tx4939]ide_dma_setup().

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:46 +01:00
Bartlomiej Zolnierkiewicz 130e886708 ide: remove ide_end_request()
* Add ide_rq_bytes() helper.

* Add blk_noretry_request() quirk to ide_complete_rq() (currently only fs
  requests can be marked as "noretry" so there is no change in behavior).

* Switch current ide_end_request() users to use ide_complete_rq().

  [ No need to check for rq->nr_sectors == 0 in {ide_dma,task_pio}_intr(),
    nsectors == 0 in cdrom_end_request() and err == 0 in ide_do_devset(). ]

* Remove no longer needed ide_end_request().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:45 +01:00
Bartlomiej Zolnierkiewicz ba7d479c36 ide: use ide_end_rq() in ide_complete_rq()
This results in PIO->DMA retry being triggered also on completion
of requests using ide_complete_rq() instead of ide_end_request().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:44 +01:00
Bartlomiej Zolnierkiewicz f974b196f5 ide: pass number of bytes to complete to ide_complete_rq()
There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:44 +01:00
Bartlomiej Zolnierkiewicz a9587fd8c4 ide: remove BUG() from ide_complete_rq()
It is no longer needed so remove it, also while at it dequeue the request
only on blk_end_request() success and make ide_complete_rq() return an error
value.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:44 +01:00
Bartlomiej Zolnierkiewicz 89f78b3261 ide: move rq->errors quirk out from ide_end_request()
Move rq->errors quirk out from ide_end_request() to its call sites.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:43 +01:00
Bartlomiej Zolnierkiewicz 6902a53312 ide: pass error value to ide_complete_rq()
Set rq->errors at ide_complete_rq() call sites and then pass
error value to ide_complete_rq().

[ Some rq->errors assignments look really wrong but this patch
  leaves them alone to not introduce too many changes at once. ]

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:43 +01:00
Bartlomiej Zolnierkiewicz 37245aabfa ide: sanitize ide_end_rq()
* Move 'uptodate' quirk from ide_end_rq() to its users.

* Move quirks for blk_noretry_request() and !blk_fs_request()
  requests from ide_end_rq() to ide_end_request().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:43 +01:00
Bartlomiej Zolnierkiewicz 1caf236daf ide: add ide_end_rq() (v2)
* Move request dequeuing from __ide_end_request() to ide_end_request().

* Rename __ide_end_request() to ide_end_rq() and export it.

* Fix ide_end_rq() to pass original blk_end_request() return value.

* ide_end_dequeued_request() is used only in cdrom_end_request()
  so inline it there and then remove the function.

v2:
* Remove needless BUG_ON() while at it (start_request()'s one is enough).

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:42 +01:00
Bartlomiej Zolnierkiewicz 1713788ff8 ide: make ide_special_rq() BUG() on unknown requests
If unknown request reaches this function something is _seriously_ wrong.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:42 +01:00
Bartlomiej Zolnierkiewicz e7fedc3ca0 ide: use ide_complete_cmd() for head unload commands
Move handling of head unload commands from task_no_data_intr()
to ide_complete_cmd() and then use ide_complete_cmd() also for
head unload commands.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:41 +01:00
Bartlomiej Zolnierkiewicz 0dfb991c69 ide: use ata_tf_protocols enums
* Add IDE_TFLAG_MULTI_PIO taskfile flag and set it for commands
  using multi-PIO protocol.

* Use ata_tf_protocols enums instead of TASKFILE_* defines to
  denote command's protocol and then rename ->data_phase field
  to ->protocol.

* Remove no longer needed <linux/hdreg.h> includes.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:39 +01:00