Commit Graph

37 Commits

Author SHA1 Message Date
John L. Burr eb4a7cbf27 IB/mthca: Fix driver when sizeof (phys_addr_t) > sizeof (long)
Some systems have PCI addresses that don't fit in unsigned long (eg some
32-bit PowerPC 440 systems have 36-bit bus addresses).  Fix up the driver
by using phys_addr_t where appropriate, so we don't truncate any PCI
resource addresses before ioremapping them.

Signed-off-by: John L. Burr <jlburr@cadence.com>

[ Update to apply to current driver source.  - Roland ]

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-11 20:39:47 -08:00
Roland Dreier 99987bea47 IB/mthca: Replace dma_sync_single() use with proper functions
dma_sync_single() is deprecated now, and the use in mthca is wrong:
there should be a dma_sync_single_for_cpu() before touching the memory
from the CPU, and a dma_sync_single_for_device() afterwards.  Fix
this, prompted by a kick in the pants from a patch from FUJITA
Tomonori <fujita.tomonori@lab.ntt.co.jp>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-06-22 23:04:13 -07:00
Eli Cohen c1f67a88bf IB/mthca: Add module parameter for number of MTTs per segment
The current MTT allocator uses kmalloc() to allocate a buffer for its
buddy allocator, and thus is limited in the amount of MTT segments
that it can control.  As a result, the size of memory that can be
registered is limited too.  This patch uses a module parameter to
control the number of MTT entries that each segment represents,
allowing more memory to be registered with the same number of
segments.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27 14:36:16 -07:00
Roland Dreier e8bb4beb2b IB/mthca: Keep free count for MTT buddy allocator
MTT entries are allocated with a buddy allocator, which just keeps
bitmaps for each level of the buddy table.  However, all free space
starts out at the highest order, and small allocations start scanning
from the lowest order.  When the lowest order tables have no free
space, this can lead to scanning potentially millions of bits before
finding a free entry at a higher order.

We can avoid this by just keeping a count of how many free entries
each order has, and skipping the bitmap scan when an order is
completely empty.  This provides a nice performance boost for a
negligible increase in memory usage.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22 14:20:05 -07:00
Roland Dreier f3781d2e89 RDMA: Remove subversion $Id tags
They don't get updated by git and so they're worse than useless.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:44 -07:00
Olaf Kirch 0bfe151cc4 IB/mthca: Avoid recycling old FMR R_Keys too soon
When a FMR is unmapped, mthca resets the map count to 0, and clears
the upper part of the R_Key which is used as the sequence counter.

This poses a problem for RDS, which uses ib_fmr_unmap as a fence
operation.  RDS assumes that after issuing an unmap, the old R_Keys
will be invalid for a "reasonable" period of time. For instance,
Oracle processes uses shared memory buffers allocated from a pool of
buffers.  When a process dies, we want to reclaim these buffers -- but
we must make sure there are no pending RDMA operations to/from those
buffers.  The only way to achieve that is by using unmap and sync the
TPT.

However, when the sequence count is reset on unmap, there is a high
likelihood that a new mapping will be given the same R_Key that was
issued a few milliseconds ago.

To prevent this, don't reset the sequence count when unmapping a FMR.

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:53 -07:00
Roland Dreier b7f9c112a5 IB/mthca: Free correct MPT on error exit from mthca_fmr_alloc()
When mthca_fmr_alloc() returns an error, it should free the MPT at the
index key, not mr->ibmr.lkey, since the lkey has been mangled by
hw_index_to_key() and no longer is the real index.  This bug causes
corruption of the MPT table free bitmap when mthca_fmr_alloc() fails.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-19 10:42:50 -08:00
Olaf Kirch 2c78853472 IB/mthca: Return proper error codes from mthca_fmr_alloc()
If the allocation of the MTT or the mailbox failed, mthca_fmr_alloc()
would return 0 (success) no matter what. This leads to crashes a
little down the road, when we try to dereference eg mr->mtt, which was
really ERR_PTR(-Ewhatever).

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04 20:20:44 -08:00
Roland Dreier 532c3b5817 IB/mthca: Fix mthca_write_mtt() on HCAs with hidden memory
Commit b2875d4c ("IB/mthca: Always fill MTTs from CPU") causes a crash
in mthca_write_mtt() with non-memfree HCAs that have their memory
hidden (that is, have only two PCI BARs instead of having a third BAR
that allows access to the RAM attached to the HCA) on 64-bit
architectures.  This is because the commit just before, c20e20ab
("IB/mthca: Merge MR and FMR space on 64-bit systems") makes
dev->mr_table.fmr_mtt_buddy equal to &dev->mr_table.mtt_buddy and
hence mthca_write_mtt() tries to write directly into the HCA's MTT
table.  However, since that table is in the HCA's memory, this is
impossible without the PCI BAR that gives access to that memory.

This causes a crash because mthca_tavor_write_mtt_seg() basically
tries to dereference some offset of a NULL pointer.  Fix this by
adding a test of MTHCA_FLAG_FMR in mthca_write_mtt() so that we always
use the WRITE_MTT firmware command rather than writing directly if
FMRs are not enabled.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-24 16:31:04 -07:00
Michael S. Tsirkin 608d8268be IB/mthca: Fix data corruption after FMR unmap on Sinai
In mthca_arbel_fmr_unmap(), the high bits of the key are masked off.
This gets rid of the effect of adjust_key(), which makes sure that
bits 3 and 23 of the key are equal when the Sinai throughput
optimization is enabled, and so it may happen that an FMR will end up
with bits 3 and 23 in the key being different.  This causes data
corruption, because when enabling the throughput optimization, the
driver promises the HCA firmware that bits 3 and 23 of all memory keys
will always be equal.

Fix by re-applying adjust_key() after masking the key.

Thanks to Or Gerlitz for reproducing the problem, and Ariel Shahar for
help in debug.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-16 14:10:55 -07:00
Michael S. Tsirkin 0264d88531 IB/mthca: Fix thinko in init_mr_table()
Commit c20e20ab ("IB/mthca: Merge MR and FMR space on 64-bit systems")
swapped the number of MTTs and MPTs when initializing the MR table. As
a result, we get a kernel oops when the number of MTT segments
allocated exceeds 0x20000.

Noted by Troy Benjegerdes <troy@scl.ameslab.gov>, and reproduced by
Dotan Barak <dotanb@mellanox.co.il>.  This fixes
https://bugs.openfabrics.org/show_bug.cgi?id=490

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-26 15:59:32 -07:00
Adrian Bunk c9add6ec56 IB/mthca: Make 2 functions static
This patch makes the needlessly global functions mthca_tavor_write_mtt_seg()
and mthca_arbel_write_mtt_seg() static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-20 20:12:02 -08:00
Michael S. Tsirkin b2875d4c39 IB/mthca: Always fill MTTs from CPU
Speed up memory registration by filling in MTTs directly when the CPU
can write directly to the whole table (all mem-free cards, and to
Tavor mode on 64-bit systems with the patch I posted earlier).  This
reduces the number of FW commands needed to register an MR by at least
a factor of 2 and speeds up memory registration significantly.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-12 16:16:29 -08:00
Michael S. Tsirkin c20e20ab0f IB/mthca: Merge MR and FMR space on 64-bit systems
For Tavor, we currently reserve separate MPT and MTT space for FMRs to
avoid abusing the vmalloc space on 32 bit kernels. No such problem
exists on 64 bit kernels so let's not do it there.

This way we have a shared pool for MR and FMR resources, used on
demand.  This will also make it possible to write MTTs for regular
regions directly from driver.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-12 16:16:29 -08:00
Michael S. Tsirkin 391e4dea71 IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs
We allocate the MTT table with alloc_pages() and then do pci_map_sg(),
so we must call pci_dma_sync_sg() after the CPU writes to the MTT
table.  This works since the device will never write MTTs on mem-free
HCAs, once we get rid of the use of the WRITE_MTT firmware command.
This change is needed to make that work, and is an improvement for
now, since it gives FMRs a chance at working.

For MPTs, both the device and CPU might write there, so we must
allocate DMA coherent memory for these.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-12 16:16:29 -08:00
Roland Dreier f4f3d0f0ec IB/mthca: Fix section mismatches
Commit b3b30f5e ("IB/mthca: Recover from catastrophic errors")
introduced some section mismatch breakage, because the error recovery
code tears down and reinitializes the device, which calls into lots of
code originally marked __devinit and __devexit from regular .text.

Fix this by getting rid of these now-incorrect section markers.

Reported by Randy Dunlap <randy.dunlap@oracle.com>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:06 -08:00
Michael S. Tsirkin ce477ae4f8 IB/mthca: FMR ioremap fix
Addresses for ioremap must be calculated off of pci_resource_start;
we can't directly use the bus address as seen by the HCA.  Fix the
code that remaps device memory for FMR access.

Based on patch by Klaus Smolin.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-10 15:16:57 -07:00
Roland Dreier e1f7868c80 IB/mthca: Fix section mismatch problems
Quite a few cleanup functions in mthca were marked as __devexit.
However, they could also be called from error paths during
initialization, so they cannot be marked that way.  Just delete all of
the incorrect annotations.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-29 09:36:46 -08:00
Eli Cohen 651eaac928 IB/mthca: Optimize large messages on Sinai HCAs
Sinai (one-port PCI Express) HCAs get improved throughput for messages
bigger than 80 KB in DDR mode if memory keys are formatted in a
specific way.  The enhancement only works if the memory key table is
smaller than 2^24 entries.  For larger tables, the enhancement is off
and a warning is printed (to avoid silent performance loss).

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Michael Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:22 -08:00
Or Gerlitz d36f34aadf IB: Enable FMR pool user to set page size
This patch allows the consumer to set the page size of "pages" mapped
by the pool FMRs, which is a feature already existing in the base
verbs API.  On the cosmetic side it changes ib_fmr_attr.page_size field
to be named page_shift.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:10 -08:00
Roland Dreier 2fa5e2ebbe IB/mthca: Whitespace cleanups
Remove trailing whitespace and fix indentation that with spaces
instead of tabs.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:09 -08:00
Roland Dreier 399d792129 IB/mthca: Get rid of might_sleep() annotations
The might_sleep() annotations in mthca are silly -- they all occur
shortly before calls that will end up in core functions like kmalloc()
that will print the same warning in an unsafe context anyway.  In
fact, beyond cluttering the source, we're actually bloating text with
CONFIG_DEBUG_SPINLOCK_SLEEP and/or CONFIG_PREEMPT_VOLUNTARY set.

With both options set, getting rid of the might_sleep()s saves a lot:
add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-171 (-171)
function                                     old     new   delta
mthca_pd_alloc                               132     109     -23
mthca_init_cq                                969     946     -23
mthca_mr_alloc                               592     568     -24
mthca_pd_free                                 67      42     -25
mthca_free_mr                                219     194     -25
mthca_free_cq                                570     545     -25
mthca_fmr_alloc                              742     716     -26

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:07 -08:00
Roland Dreier de6eb66b56 [IB] kzalloc() conversions
Replace kmalloc()+memset(,0,) with kzalloc(), for a net savings of 35
source lines and about 500 bytes of text.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02 07:23:14 -08:00
Guy German 7f9f2dba72 [PATCH] IB/mthca: use generic function instead of arbel_ version in mthca_free_region()
Use the generic key_to_hw_index() function instead of the Arbel-specific
version in mthca_free_region().

Signed-off-by: Guy German <guyg@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:36 -07:00
Sean Hefty 97f52eb438 [PATCH] IB: sparse endianness cleanup
Fix sparse warnings.  Use __be* where appropriate.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:35 -07:00
Roland Dreier 2a1d9b7f09 [PATCH] IB: Add copyright notices
Make some lawyers happy and add copyright notices for people who
forgot to include them when they actually touched the code.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:35 -07:00
Roland Dreier ed878458ee [PATCH] IB/mthca: Align FW command mailboxes to 4K
Future versions of Mellanox HCA firmware will require command mailboxes to be
aligned to 4K.  Support this by using a pci_pool to allocate all mailboxes.
This has the added benefit of shrinking the source and text of mthca.

Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:46 -07:00
Roland Dreier d56d6f9502 [PATCH] IB/mthca: Split off MTT allocation
Split allocation of MTT range from creation of MR.  This will be useful for
implementing shared memory regions and userspace verbs.

Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:46 -07:00
Roland Dreier a03a5a67b2 [PATCH] IB/mthca: Move mthca_is_memfree checks
Make mthca_table_put() and mthca_table_put_range() NOPs if the device is not
mem-free, so that we don't have to have "if (mthca_is_memfree())" tests in the
callers of these functions.  This makes our code more readable and
maintainable, and saves a couple dozen bytes of text in ib_mthca.ko as well.

Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:45 -07:00
Roland Dreier d10ddbf6d7 [PATCH] IB/mthca: encapsulate mem-free check into mthca_is_memfree()
Clean up mem-free mode support by introducing mthca_is_memfree() function,
which encapsulates the logic of deciding if a device is mem-free.

Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:32 -07:00
Michael S. Tsirkin e0f5fdca1c [PATCH] IB/mthca: add fast memory region implementation
Implement fast memory regions (FMRs), where the driver writes directly into
the HCA's translation tables rather than requiring a firmware command.  For
Tavor, MTTs for FMR are separate from regular MTTs, and are reserved at driver
initialization.  This is done to limit the amount of virtual memory needed to
map the MTTs.  For Arbel, there's no such limitation, and all MTTs and MPTs
may be used for FMR or for regular MR.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:30 -07:00
Michael S. Tsirkin d0a9d25cdc [PATCH] IB/mthca: split MR key munging routines
Split Tavor and Arbel/mem-free index<->hw key munging routines, so that FMR
implementation can call correct implementation without testing HCA type (which
it already knows).

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:30 -07:00
Michael S. Tsirkin 9095e208d8 [PATCH] IB/mthca: encapsulate MTT buddy allocator
Encapsulate the buddy allocator used for MTT segments.  This cleans up the
code and also gets us ready to add FMR support.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:26 -07:00
Roland Dreier 44ea66879d [PATCH] IB/mthca: fix MTT allocation in mem-free mode
Fix bug in MTT allocation in mem-free mode.

I misunderstood the MTT size value returned by the firmware -- it is really
the size of a single MTT entry, since mem-free mode does not segment the MTT
as the original firmware did.  This meant that our MTT addresses ended up
being off by a factor of 8.  This meant that our MTT allocations might
overlap, and so we could overwrite and corrupt earlier memory regions when
writing new MTT entries.

We fix this by always using our 64-byte MTT segment size.  This allows some
simplification of the code as well, since there's no reason to put the MTT
segment size in a variable -- we can always use our enum value directly.

Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:24 -07:00
Michael S. Tsirkin 55645e9b0a [PATCH] IB/mthca: fix MR allocation error path
Fix error handling in MR allocation for mem-free mode: mthca_free must get an
MR index, not a key.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:19 -07:00
Roland Dreier 86562a1391 [PATCH] IB/mthca: map MPT/MTT context in mem-free mode
In mem-free mode, when allocating memory regions, make sure that the HCA has
context memory mapped to cover the virtual space used for the MPT and MTTs
being used.

Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:13 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00