Commit Graph

70 Commits

Author SHA1 Message Date
Mike Frysinger 5b4662f098 regulator: da903x: add missing __devexit_p()
The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Liam Girdwood <lrg@slimlogic.co.uk>
CC: Mike Rapoport <mike@compulab.co.il>
CC: Eric Miao <eric.miao@marvell.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-05-18 11:21:10 +01:00
Mark Brown 3e59091828 regulator: Fix default constraints for fixed voltage regulators
Default voltage constraints were being provided for fixed voltage
regulator where board constraints were not provided but these constraints
used INT_MIN as the default minimum voltage which is not a valid value
since it is less than zero. Use 1uV instead.

Also set the default values we set in the constraints themselves since
otherwise the max_uV constraint we determine will not be stored in the
actual constraint strucutre and will therefore not be used.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28 18:58:08 +01:00
Philipp Zabel 030853b7ab regulator/bq24022: fix bug in is_enabled function
This seems to be fallout from last October's regulator core rework.
It got noticed only because of recent regulator framework changes.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28 18:58:08 +01:00
Mike Rapoport aa61d558f0 regulator/virtual: fix strings compare predicates
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28 18:58:07 +01:00
Paul Walmsley 53032dafc6 regulator core: fix double-free in regulator_register() error path
During regulator registration, any error after device_register() will
cause a double-free on the struct regulator_dev 'rdev'.  The bug is in
drivers/regulator/core.c:regulator_register():

...
scrub:
	device_unregister(&rdev->dev);
clean:
	kfree(rdev);                           <---
	rdev = ERR_PTR(ret);
	goto out;
...

device_unregister() calls regulator_dev_release() which frees rdev.  The
subsequent kfree corrupts memory and causes some OMAP3 systems to oops on
boot in regulator_get().

Applies against 2.6.30-rc3.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28 18:58:07 +01:00
Diego Liziero cd78dfc6c6 drivers/regulator: fix when type is different from REGULATOR_VOLTAGE or REGULATOR_CURRENT
When regulator_desc->type is something different from REGULATOR_VOLTAGE or REGULATOR_CURRENT
the if should probably return ERR_PTR(-EINVAL)

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

@@ expression E; constant C; @@
(
- !E == C
+ E != C
)

Signed-off-by: Diego Liziero <diegoliz@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28 18:58:07 +01:00
Dan Carpenter 036de8efae unreachable code in drms_uA_update()
I removed the extra semi-colon and indented the return statement.

The unreachable code was found by smatch (http://repo.or.cz/w/smatch.git).
The patch was compile tested.

regards,
dan carpenter

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28 18:58:06 +01:00
Adrian Hunter d6bb69cfa8 regulator: twl4030 VAUX3 supports 3.0V
TWL4030 and TWL5030 support 3.0V on VAUX3.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
2009-03-31 11:29:54 +01:00
Mark Brown ca7255614e regulator: Support disabling of unused regulators by machines
At present it is not possible for machine constraints to disable
regulators which have been left on when the system starts, for example
as a result of fixed default configurations in hardware. This means that
power may be wasted by these regulators if they are not in use.

Provide intial support for this with a late_initcall which will disable
any unused regulators if the machine has enabled this feature by calling
regulator_has_full_constraints(). If this has not been called then print
a warning to encourage users to fully specify their constraints so that
we can change this to be the default behaviour in future.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:29 +01:00
Mark Brown 50f075963f regulator: Don't increment use_count for boot_on regulators
Don't set use_count for regulators that are enabled at boot since this
stops the supply being disabled by well-behaved consumers which do
balanced enables and disabled. Any consumers which don't do disables
which are not matched by enables are unable to share regulators - shared
regulators are the common case so the API should facilitate them.

Consumers that want to disable regulators that are enabled when they
start have two options:

 - Do a regulator_enable() prior to the disable to bring the use count
   in sync with the hardware state; this will ensure that if the
   regulator was enabled by another driver then this consumer will play
   nicely with it.
 - Use regulator_force_disable(); this explicitly bypasses any checks
   done by the core and documents the inability of the driver to share
   the supply.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:29 +01:00
David Brownell 52914eaa49 twl4030-regulator: expose VPLL2
Add VPLL2 to the set of twl4030-family regulators exposed for
use by various drivers.  It's commonly used to power the digital
video outputs (e.g. LCD or DVI displays) on OMAP3 systems.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:28 +01:00
David Brownell cd94b50530 regulator: refcount fixes
Fix some refcounting issues in the regulator framework, supporting
regulator_disable() for regulators that were enabled at boot time
via machine constraints:

 - Update those regulators' usecounts after enabling, so they
   can cleanly be disabled at that level.

 - Remove the problematic per-consumer usecount, so there's
   only one level of enable/disable.

Buggy consumers could notice different bug symptoms.  The main
example would be refcounting bugs; also, any (out-of-tree) users
of the experimental regulator_set_optimum_mode() stuff which
don't call it when they're done using a regulator.

This is a net minor codeshrink.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:28 +01:00
Mark Brown 1dc60343f8 regulator: Don't warn if we failed to get a regulator
The consumer can print a message if required, some consumers may have
optional regulators and wish to downgrade the logging for them or ignore
their absence.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:28 +01:00
Mark Brown cacf90f24e regulator: Allow boot_on regulators to be disabled by clients
Rather than incrementing the reference count for boot_on regulators
(which prevents them being disabled later on) simply force the
regulator to be enabled when applying the constraints. Previously
boot_on was essentially equivalent to always_on.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:27 +01:00
Mark Brown 221a7c7c9c regulator: Implement list_voltage for WM835x LDOs and DCDCs
Implement the recently added voltage step listing API for the WM835x
DCDCs and LDOs. DCDCs can use values up to 0x66, LDOs can use the full
range of values in the mask. Both masks are the lower bits of the
register.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:27 +01:00
David Brownell 1897e7423b twl4030-regulator: list more VAUX4 voltages
The VAUX4 voltage table scrolls onto a second page in many versions
of the TWL4030 family manuals.  This doesn't mean we should ignore
those values!  Some boards use the (fully supported) 2.8V setting.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:27 +01:00
Mark Brown 3e2b9abda5 regulator: Don't warn on omitted voltage constraints
Specifying voltage constraints is optional (and only needed if the
consumer is allowed to change the voltage) so don't complain unless
a voltage has been specified.

Also avoid surprises with a dangling else while we're here.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:26 +01:00
Mark Brown 216765d92a regulator: Implement list_voltage() for WM8400 DCDCs and LDOs
All DCDCs and LDOs are identical.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:26 +01:00
David Brownell 66b659e685 regulator: twl4030 voltage enumeration (v2)
Update previously-posted twl4030 regulator driver to export
supported voltages to upper layers using a new mechanism.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:25 +01:00
David Brownell fa16a5c13a regulator: twl4030 regulators
Support most of the LDO regulators in the twl4030 family chips.
In the case of LDOs supporting MMC/SD, the voltage controls are
used; but in most other cases, the regulator framework is only
used to enable/disable a supplies, conserving power when a given
voltage rail is not needed.

The drivers/mfd/twl4030-core.c code already sets up the various
regulators according to board-specific configuration, and knows
that some chips don't provide the full set of voltage rails.

The omitted regulators are intended to be under hardware control,
such as during the hardware-mediated system powerup, powerdown,
and suspend states.  Unless/until software hooks are known to
be safe, they won't be exported here.

These regulators implement the new get_status() operation, but
can't realistically implement get_mode(); the status output is
effectively the result of a vote, with the relevant hardware
inputs not exposed.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:25 +01:00
David Brownell 4367cfdc7c regulator: enumerate voltages (v2)
Add a basic mechanism for regulators to report the discrete
voltages they support:  list_voltage() enumerates them using
selectors numbered from 0 to an upper bound.

Use those methods to force machine-level constraints into bounds.
(Example:  regulator supports 1.8V, 2.4V, 2.6V, 3.3V, and board
constraints for that rail are 2.0V to 3.6V ... so the range of
voltages is then 2.4V to 3.3V on this board.)

Export those voltages to the regulator consumer interface, so for
example regulator hooked up to an MMC/SD/SDIO slot can report the
actual voltage options available to cards connected there.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:24 +01:00
Mark Brown 33f301af0c regulator: Fix get_mode() for WM835x DCDCs
The WM835x regulators need a different register checking for force
mode on each DCDC. Previously the force mode status for DCDC1 was
checked.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:24 +01:00
Mark Brown a308466c24 regulator: Allow regulators to set the initial operating mode
This is useful when wishing to run in a fixed operating mode that isn't
the default.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:24 +01:00
Mark Brown fe203ddfa5 regulator: Suggest use of datasheet supply or pin names for consumers
Update the documentation to suggest the use of datasheet names for
the supplies requested by regulator consumers. Doing this makes it
easier to tie the design for a given platform up with the requirements
of the driver for a consumer.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:23 +01:00
Mike Rapoport 0f1d747bfa regulator: add unset_regulator_supplies to fix regulator_unregister
Currently regulator_unregister does not clear regulator <--> consumer
mapping.
This patch introduces unset_regulator_supplies that clear the map.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:23 +01:00
Mark Brown 1fa9ad52b0 regulator: Hoist struct regulator_dev out of core to fix notifiers
Commit 872ed3fe176833f7d43748eb88010da4bbd2f983 caused regulator drivers
to take the struct regulator_dev lock themselves which requires that the
struct be visible to them. Band aid this by making the struct visible.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:22 +01:00
Mark Brown fefdae4246 regulator: Mark attributes table for virtual regulator static
It's not exported.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:22 +01:00
Mark Brown a9cb63b2a1 regulator: Make fixed voltage regulators visible in Kconfig
This allows users to enable or disable support for these regulators at
build time as they can for other regulators rather than having platforms
force the regulators to be built in.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:21 +01:00
Mark Brown bcf3402c50 regulator: Allow init_data to be passed to fixed voltage regulators
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:21 +01:00
Mark Brown 93c62da23a regulator: Allow init data to be supplied for bq24022
Previously it was not possible to do so, making it impossible for
machines to configure the driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:21 +01:00
Mark Brown 0527100fd1 regulator: Pass regulator init data as explict argument when registering
Rather than having the regulator init data read from the platform_data
member of the struct device that is registered for the regulator make
the init data an explict argument passed in when registering. This
allows drivers to use the platform data for their own purposes if they
wish.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:21 +01:00
Jonathan Cameron b136fb4463 Regulator: Push lock out of _notifier_call_chain + add voltage change event.
Regulator: Push lock out of _notifier_call_chain and into caller functions
(side effect of fixing deadlock in regulator_force_disable)
+ Add a voltage changed event.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:20 +01:00
Andrew Morton 9485397aa2 regulator: minor cleanup of virtual consumer
On Thu, 15 Jan 2009 16:10:22 -0800
Andrew Morton <akpm@linux-foundation.org> wrote:

> On Wed, 14 Jan 2009 13:16:27 -0800
> David Brownell <david-b@pacbell.net> wrote:
>
> > From: David Brownell <dbrownell@users.sourceforge.net>
> >
> > Minor cleanup to the regulator set_mode sysfs support:
> > switch to sysfs_streq() in set_mode(), which is also
> > a code shrink.  Use the same strings that get_mode()
> > uses, shrinking data too.
> >
> > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> > ---
> >  drivers/regulator/virtual.c |    8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > --- a/drivers/regulator/virtual.c
> > +++ b/drivers/regulator/virtual.c
> > @@ -226,13 +226,13 @@ static ssize_t set_mode(struct device *d
> >  	unsigned int mode;
> >  	int ret;
> >
> > -	if (strncmp(buf, "fast", strlen("fast")) == 0)
> > +	if (sysfs_streq(buf, "fast\n") == 0)
> >  		mode = REGULATOR_MODE_FAST;
> > -	else if (strncmp(buf, "normal", strlen("normal")) == 0)
> > +	else if (sysfs_streq(buf, "normal\n") == 0)
> >  		mode = REGULATOR_MODE_NORMAL;
> > -	else if (strncmp(buf, "idle", strlen("idle")) == 0)
> > +	else if (sysfs_streq(buf, "idle\n") == 0)
> >  		mode = REGULATOR_MODE_IDLE;
> > -	else if (strncmp(buf, "standby", strlen("standby")) == 0)
> > +	else if (sysfs_streq(buf, "standby\n") == 0)
> >  		mode = REGULATOR_MODE_STANDBY;
>
> we don't need the \n's, do we?

oh, it's for the string sharing.  Sneaky.

I wonder how many people will try to fix that up for us?

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:20 +01:00
David Brownell 853116a105 regulator: add get_status()
Based on previous LKML discussions:

 * Update docs for regulator sysfs class attributes to highlight
   the fact that all current attributes are intended to be control
   inputs, including notably "state" and "opmode" which previously
   implied otherwise.

 * Define a new regulator driver get_status() method, which is the
   first method reporting regulator outputs instead of inputs.
   It can report on/off and error status; or instead of simply
   "on", report the actual operating mode.

For the moment, this is a sysfs-only interface, not accessible to
regulator clients.  Such clients can use the current notification
interfaces to detect errors, if the regulator reports them.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:20 +01:00
David Brownell 93e14baa44 regulator: minor cleanup of virtual consumer
Minor cleanup to the regulator set_mode sysfs support:
switch to sysfs_streq() in set_mode(), which is also
a code shrink.  Use the same strings that get_mode()
uses, shrinking data too.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:19 +01:00
Roel Kluin 8dd2c9e312 leds: Fix bounds checking of wm8350->pmic.led
Fix bounds checking of wm8350->pmic.led

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-30 21:50:49 +00:00
Philipp Zabel 9bf503e6be regulator: move bq24022 init back to module_init instead of subsys_initcall
This workaround was needed when regulator/ was not linked before both
power/ and usb/otg/ in drivers/Makefile. Now that it is even linked
before mfd/, this patch makes sure that bq24022 isn't probed before the
GPIO expander is set up.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-30 21:50:49 +00:00
Uwe Kleine-König 5dbdf73548 move wm8400-regulator's probe function to .devinit.text
A pointer to wm8400_regulator_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-17 13:46:40 +00:00
Balaji Rao 5ec271e745 regulator: PCF50633 pmic driver
Changes from V1:
	- Removed support for suspend_enable & suspend_disable functions.

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-11 01:34:25 +01:00
Linus Torvalds d7d717fa88 Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: ledtrig-timer - on deactivation hardware blinking should be disabled
  leds: Add suspend/resume to the core class
  leds: Add WM8350 LED driver
  leds: leds-pcs9532 - Move i2c work to a workqueque
  leds: leds-pca9532 - fix memory leak and properly handle errors
  leds: Fix wrong loop direction on removal in leds-ams-delta
  leds: fix Cobalt Raq LED dependency
  leds: Fix sparse warning in leds-ams-delta
  leds: Fixup kdoc comment to match parameter names
  leds: Make header variable naming consistent
  leds: eds-pca9532: mark pca9532_event() static
  leds: ALIX.2 LEDs driver
2009-01-09 13:55:37 -08:00
David Brownell 6001e13c5f regulator: catch some registration errors
Prevent registration of duplicate "struct regulator" names.
They'd be unavailable, and clearly indicate something wrong.

[Edited to remove check for NULL consumer device until we have a
solution for things like cpufreq -- broonie]

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08 20:10:34 +00:00
Mark Brown cf7bbcdf4d regulator: Fix some kerneldoc rendering issues
There are some minor textual changes in here as well, mostly to enable()
and disable() but the primary goal of these changes is to fix
misrenderings of the kerneldoc documentation for the regulator API.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08 20:10:33 +00:00
Mark Brown c8e7e4640f regulator: Add missing kerneldoc
This is only the documentation that the kerneldoc system warns about.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08 20:10:33 +00:00
Mark Brown 69279fb9a9 regulator: Clean up kerneldoc warnings
Remove kerneldoc warnings that don't relate to missing documentation,
mostly by renaming parameters in the documentation to match their
actual names.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08 20:10:33 +00:00
Mark Brown 8dc5390d4f regulator: Remove extraneous kerneldoc annotations
Some of the internal structures have no kerneldoc but the ** at the start
of the comment marking them for documentation.  Remove the annotation
until some is added.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08 20:10:32 +00:00
Mike Rapoport 74f544c1fc regulator: move set_machine_constraints after regulator device initialization
Calling set_machine_constraints before regulator device initialization
causes crash when constraints have apply_uV set.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08 20:10:31 +00:00
Mike Rapoport 961869048b regulator: da903x: make da903x_is_enabled return 0 or 1
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08 20:10:31 +00:00
Mike Rapoport 471d8d49a7 regulator: da903x: add '\n' to error messages
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08 20:10:31 +00:00
David Brownell 7ad68e2f97 regulator: sysfs attribute reduction (v2)
Clean up the sysfs interface to regulators by only exposing the
attributes that can be properly displayed.  For example: when a
particular regulator method is needed to display the value, only
create that attribute when that method exists.

This cleaned-up interface is much more comprehensible.  Most
regulators only support a subset of the possible methods, so
often more than half the attributes would be meaningless.  Many
"not defined" values are no longer necessary.  (But handling
of out-of-range values still looks a bit iffy.)

Documentation is updated to reflect that few of the attributes
are *always* present, and to briefly explain why a regulator may
not have a given attribute.

This adds object code, about a dozen bytes more than was removed
by the preceding patch, but saves a bunch of per-regulator data
associated with the now-removed attributes.  So there's a net
reduction in memory footprint.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08 20:10:30 +00:00
David Brownell 4fca9545d1 regulator: code shrink (v2)
Shrink regulator core by removing duplication in attribute printing
and probe() cleanup paths.  Saves about 340 bytes (object) on ARM.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08 20:10:30 +00:00