Commit Graph

197 Commits

Author SHA1 Message Date
Ville Syrjälä 18ace11f87 drm: Introduce per-device driver_features
We wish to control certain driver_features flags on a per-device basis
while still sharing a single drm_driver instance across all the
devices. To that end introduce device.driver_features. By default
it will be set to ~0 to not impose any limits beyond
driver.driver_features. Drivers can then clear specific flags
in the per-device bitmask to limit the capabilities of the device.

An alternative approach would be to copy the driver_features from
the driver into the device in drm_dev_init(), however that would
require verifying that no driver is currently changing
driver.driver_features after drm_dev_init(). Hence the ~0 apporach
was easier.

Ideally we'd also make drm_driver const but there is plenty of code
left that wants to mutate it (eg. various vfunc assignments). We'll
need to fix all that up before we can make it const.

And while at it fix up the type of the feature flag passed to
drm_core_check_feature().

v2: Streamline the && vs. & (Chris)
    s/int/u32/ in drm_core_check_feature() args

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913131622.17690-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
2018-09-13 18:44:06 +03:00
Lyude Paul a18b219294 drm/dp_helper: Add DP aux channel tracing
This is something we've needed for a very long time now, as it makes
debugging issues with faulty MST hubs along with debugging issues
regarding us interfacing with hubs correctly vastly easier to debug.
Currently this can actually be done if you trace the i2c devices for DP
using ftrace but that's significantly less useful for a couple of
reasons:

- Tracing the i2c devices through ftrace means all of the traces are
  going to contain a lot of "garbage" output that we're sending over the
  i2c line. Most of this garbage comes from retrying transactions, DRM's
  helper library adding extra transactions to work around bad hubs, etc.
- Having a user set up ftrace so that they can provide debugging
  information is a lot more difficult then being able to say "just boot
  with drm.debug=0x100"
- We can potentially expand upon this tracing in the future to print
  debugging information in regards to other DP transactions like MST
  sideband transactions

This is inspired by a patch Rob Clark sent to do this a long time back.
Neither of us could find the patch however, so we both assumed it would
probably just be easier to rewrite it anyway.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716154432.13433-1-lyude@redhat.com
2018-07-16 11:47:53 -04:00
Noralf Trønnes c76f0f7cb5 drm: Begin an API for in-kernel clients
This the beginning of an API for in-kernel clients.
First out is a way to get a framebuffer backed by a dumb buffer.

Only GEM drivers are supported.
The original idea of using an exported dma-buf was dropped because it
also creates an anonomous file descriptor which doesn't work when the
buffer is created from a kernel thread. The easy way out is to use
drm_driver.gem_prime_vmap to get the virtual address, which requires a
GEM object. This excludes the vmwgfx driver which is the only non-GEM
driver apart from the legacy ones. A solution for vmwgfx will have to be
worked out later if it wants to support the client API which it probably
will when we have a bootsplash client.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-2-noralf@tronnes.org
2018-07-10 14:51:37 +02:00
Dave Airlie 4216c1b9af Single fix for v4.18:
- Fix possible race conditions while unplugging DRM device.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAlsjdH0ACgkQ/lWMcqZw
 E8OqmRAAoI6zMk71lQo5ydN3uo47aj5MUvz9cYIioDGI2VVsAvwEWG0x/R/+CTyR
 UrLyB+sMkFsL8VvlABq4q7dM3a66T5ZF9j4+StI3AK7MmlcPcf8WzzOJlwyHR4AO
 kvUCRcMgYYrbJJ5R36qj9dyDtd6BFGql/hFVTv7tim1QY8AdGFB7MMaK6AofPxbX
 h6CHbpQu9GQDIxhfBPBGj7u1z+ew51mT/ZxjzvsjaCjYbVNKRSFU9qAYlSOqYYM6
 MlZRlssV3oRq9u0ZntHJZO0/k4rndImlcKQd9jCMDOObNTxE9c0Kdh+1F2PrOL6s
 QGi42W2CqEsaqJ/Rc/vZ6g6sbpBPJjaTsFRLjtrlgNc78kopsue2FW3p6tFSyRug
 NHCPYwEwfaPaA+/XWsv936Zqq6bTDdJCh6XI7nHslIuOvYgymvmBJQ5cS2FahaBM
 ylzGnDySkdcP3OgytIdFz6/bPnkT8NmcoHqfXUyTwDpBKIX9a+BlPkchCj8noHNO
 s7OfxgJsECpj79c2ezwza4zUVNmGYmQbLoB9R3hw/qxEQ5CBcR+XMwuf9u9+Xlqh
 OBLPcdP+covHgtqNV+faMCgSSJHDp5nPlCEh/KDJCJp5ZUStHT7Vw8cVSXRS80jr
 VfhK/wTdOJX4BRCKT68BGrkE6gaNqk6uTAGM6gJwMcRShuZaYo8=
 =eAzc
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-fixes-2018-06-15' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Single fix for v4.18:
- Fix possible race conditions while unplugging DRM device.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1fd8b7d1-e60a-0105-dfb5-d36f99ea0239@linux.intel.com
2018-06-20 16:58:31 +10:00
Linus Torvalds 135c5504a6 drm for v4.18-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbFzauAAoJEAx081l5xIa+jzwP/AwfTreH3XBmlLeMO8kwkAMW
 AiH1u3KHrlitN1U85x90dC8hVuuV2Kv9pEXQo1me/TAL/QCb9VZYCSf2dHHkkMwD
 1UdwxAQW7soBbTRo9k0zuVJpRGSYIiYfqDh3L6KmTC3UF0tUJm53VOWCLG/DNrtn
 XhEnGnlCUNbABZMMpavEvlwxPtvaYFlp6M+MmwRPIx32SrPJ3vSaBzxwWxOaFmjU
 xiRdK+GpAbCV8yGeCCSkDgEe/TdWGUhZxoC9dLb0H9ex7ip8uZ0W4D+VTHPFrhQX
 6nCpqUbp7BQTsbVSd1pAVsAv45scmSgWbKcqfC0NKSVcsHcJZBR0tQOF9OvnGZcf
 o1Hv/beTqJ++IcG2rEIwyJTGxAGfZ0YSb0evTC9VcszaYo+b3+G283bdztIjzDeS
 0QCTeLHYbZRHPITWVULNpMWy3TkJv32IdFhQfYSnD8/OGQIxLNhh4FFOtHnOmxSF
 N8dnzOLKXhXMo/NgOL+UMNnbgLqIyOtEXCPDLuOQJNv/SOp8662m/A0yRjQNR6M2
 gsPmR7dxQIwwJMyqrkLDOF411ABZohulquYgwLgG938MRPmTpPWOR72PtpGF4hAW
 HLg+3HHBd1N/A1mlJUMAbUn2eMUACZBUIycE9u+U/geRgve/OQnzJH/FKGP2EJ4R
 pf6CruEva+6GRR5GVzuM
 =twst
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This starts to support NVIDIA volta hardware with nouveau, and adds
  amdgpu support for the GPU in the Kabylake-G (the intel + radeon
  single package chip), along with some initial Intel icelake enabling.

  Summary:

  New Drivers:
   - v3d - driver for broadcom V3D V3.x+ hardware
   - xen-front - XEN PV display frontend

  core:
   - handle zpos normalization in the core
   - stop looking at legacy pointers in atomic paths
   - improved scheduler documentation
   - improved aspect ratio validation
   - aspect ratio support for 64:27 and 256:135
   - drop unused control node code.

  i915:
   - Icelake (ICL) enabling
   - GuC/HuC refactoring
   - PSR/PSR2 enabling and fixes
   - DPLL management refactoring
   - DP MST fixes
   - NV12 enabling
   - HDCP improvements
   - GEM/Execlist/reset improvements
   - GVT improvements
   - stolen memory first 4k fix

  amdgpu:
   - Vega 20 support
   - VEGAM support (Kabylake-G)
   - preOS scanout buffer reservation
   - power management gfxoff support for raven
   - SR-IOV fixes
   - Vega10 power profiles and clock voltage control
   - scatter/gather display support on CZ/ST

  amdkfd:
   - GFX9 dGPU support
   - userptr memory mapping

  nouveau:
   - major refactoring for Volta GV100 support

  tda998x:
   - HDMI i2c CEC support

  etnaviv:
   - removed unused logging code
   - license text cleanups
   - MMU handling improvements
   - timeout fence fix for 50 days uptime

  tegra:
   - IOMMU support in gr2d/gr3d drivers
   - zpos support

  vc4:
   - syncobj support
   - CTM, plane alpha and async cursor support

  analogix_dp:
   - HPD and aux chan fixes

  sun4i:
   - MIPI DSI support

  tilcdc:
   - clock divider fixes for OMAP-l138 LCDK board

  rcar-du:
   - R8A77965 support
   - dma-buf fences fixes
   - hardware indexed crtc/du group handling
   - generic zplane property support

  atmel-hclcdc:
   - generic zplane property support

  mediatek:
   - use generic video mode function

  exynos:
   - S5PV210 FIMD variant support
   - IPP v2 framework
   - more HW overlays support"

* tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm: (1286 commits)
  drm/amdgpu: fix 32-bit build warning
  drm/exynos: fimc: signedness bug in fimc_setup_clocks()
  drm/exynos: scaler: fix static checker warning
  drm/amdgpu: Use dev_info() to report amdkfd is not supported for this ASIC
  drm/amd/display: Remove use of division operator for long longs
  drm/amdgpu: Update GFX info structure to match what vega20 used
  drm/amdgpu/pp: remove duplicate assignment
  drm/sched: add rcu_barrier after entity fini
  drm/amdgpu: move VM BOs on LRU again
  drm/amdgpu: consistenly use VM moved flag
  drm/amdgpu: kmap PDs/PTs in amdgpu_vm_update_directories
  drm/amdgpu: further optimize amdgpu_vm_handle_moved
  drm/amdgpu: cleanup amdgpu_vm_validate_pt_bos v2
  drm/amdgpu: rework VM state machine lock handling v2
  drm/amdgpu: Add runtime VCN PG support
  drm/amdgpu: Enable VCN static PG by default on RV
  drm/amdgpu: Add VCN static PG support on RV
  drm/amdgpu: Enable VCN CG by default on RV
  drm/amdgpu: Add static CG control for VCN on RV
  drm/exynos: Fix default value for zpos plane property
  ...
2018-06-06 08:16:33 -07:00
Oleksandr Andrushchenko 069035c5db drm: Fix possible race conditions while unplugging DRM device
When unplugging a hotpluggable DRM device we first unregister it
with drm_dev_unregister and then set drm_device.unplugged flag which
is used to mark device critical sections with drm_dev_enter()/
drm_dev_exit() preventing access to device resources that are not
available after the device is gone.
But drm_dev_unregister may lead to hotplug uevent(s) fired to
user-space on card and/or connector removal, thus making it possible
for user-space to try accessing a disconnected device.

Fix this by first making sure device is properly marked as
disconnected and only then unregister it.

Fixes: bee330f3d6 ("drm: Use srcu to protect drm_device.unplugged")

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reported-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180522141304.18646-1-andr2000@gmail.com
2018-05-31 10:36:28 +03:00
Haneen Mohammed 7f6df440b8 drm: Match sysfs name in link removal to link creation
This patch matches the sysfs name used in the unlinking with the
linking function. Otherwise, remove_compat_control_link() fails to remove
sysfs created by create_compat_control_link() in drm_dev_register().

Fixes: 6449b088dd ("drm: Add fake controlD* symlinks for backwards
compat")
Cc: Dave Airlie <airlied@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
[seanpaul added Fixes and Cc tags]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511041542.GA4253@haneen-vb
2018-05-11 09:06:05 -04:00
Daniel Vetter 0d49f303e8 drm: remove all control node code
With the ioctl and driver prep done, we can remove everything else.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20180420065159.4531-4-daniel.vetter@ffwll.ch
2018-05-03 21:26:32 +02:00
Noralf Trønnes bee330f3d6 drm: Use srcu to protect drm_device.unplugged
Use srcu to protect drm_device.unplugged in a race free manner.
Drivers can use drm_dev_enter()/drm_dev_exit() to protect and mark
sections preventing access to device resources that are not available
after the device is gone.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Tested-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1522222715-11814-1-git-send-email-andr2000@gmail.com
2018-03-29 13:19:20 +03:00
Joe Moriarty 3bd07ccd27 drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
The Parfait (version 2.1.0) static code analysis tool found the
following NULL pointer dereference problem.

- drivers/gpu/drm/drm_drv.c
Any calls to drm_minor_get_slot() could result in the return of a NULL
pointer when an invalid DRM device type is encountered.  The
return of NULL was removed with BUG() from drm_minor_get_slot().

Signed-off-by: Joe Moriarty <joe.moriarty@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220191157.100960-3-joe.moriarty@oracle.com
2018-03-06 08:14:16 +01:00
Daniel Vetter 70c5f93669 Merge airlied/drm-next into drm-misc-next
Bake in the conflict between the drm_print.h extraction and the
addition of DRM_DEBUG_LEASES since we lost it a few too many times.

Also fix a new use of drm_plane_helper_check_state in msm to follow
Ville's conversion in

commit a01cb8ba3f
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Wed Nov 1 22:16:19 2017 +0200

    drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c

Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-11-21 14:17:56 +01:00
Keith Packard e7646f84ad drm: Add new LEASE debug level
Separate out lease debugging from the core.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-10-25 16:31:29 +10:00
Haneen Mohammed 02c9656b2f drm: Move debug macros out of drmP.h
This patch extract DRM_* debug macros from drmP.h to drm_print.h and
move printing related functions used by these macros from drm_drv.[hc]
to drm_print.[hc].

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/4020bc7c5ffad2af516919f78bb837c7f366b82b.1508297716.git.hamohammed.sa@gmail.com
2017-10-20 13:14:48 -04:00
Aishwarya Pant 9a96f55034 drm: introduce drm_dev_{get/put} functions
Reference counting functions in the kernel typically use get/put suffixes. For
maintaining coding style consistency, introduce drm_dev_{get/put} functions. All
callers of drm_dev_ref() API have been converted in this patch and hence it has
been dropped while the drm_dev_unref() API with non-trivial number of users
remains for compatibility.

The semantic patch scripts/coccinelle/api/drm-get-put.cocci has been updated
with the new helper for conversion of drm_dev_unref() to drm_dev_put()

Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/6babda56134035a98220d5d37a4fd4048df214ce.1506413698.git.aishpant@gmail.com
2017-09-26 13:12:15 +02:00
Daniel Vetter 0469901ea4 drm: Clean up drm_dev_unplug
Use drm_dev_unregister to unregister the interfaces, which also allows
us to simplify the open_count == 0 case.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170802115604.12734-5-daniel.vetter@ffwll.ch
2017-08-11 10:49:21 +02:00
Daniel Vetter 2e45eeac7c drm: Only lastclose on unload for legacy drivers
The only thing modern drivers are supposed to do in lastclose is
restore the fb emulation state. Which is entirely optional, and
there's really no reason to do that. So restrict it to legacy drivers
(where the driver cleanup essentially happens in lastclose).

This will also allow us to share the unregister function with
drm_dev_unplug().

Quoting my reply to Alex on dri-devel:
On Thu, Aug 3, 2017 at 1:17 AM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
> On Wed, Aug 2, 2017 at 10:50 PM, Alex Deucher <alexdeucher@gmail.com> wrote:
>> On Wed, Aug 2, 2017 at 7:56 AM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
>>> The only thing modern drivers are supposed to do in lastclose is
>>> restore the fb emulation state. Which is entirely optional, and
>>> there's really no reason to do that. So restrict it to legacy drivers
>>> (where the driver cleanup essentially happens in lastclose).
>>
>> vga_switcheroo_process_delayed_switch() gets called in lastclose.
>> Won't that need to get moved elsewhere for this to work?
>
> Hm right, I forgot the lazy way to do runtime pm by keeping the device
> alive as long as anyone has an open fd for it ... This shouldn't be a
> problem, since you need to unregister from vgaswitcheroo anyway on
> unload. Maybe that blows up, I'll check the code and augment the patch
> as needed.

So I think there's 3 cases:
- Trying to unload the module. You can't do that while anyone has the
fd still open, so lastclose is guaranteeed to run.
- Forcefully unbinding the driver through sysfs. Not any better, since
the can_switch stuff checks for the open count, and so will delay the
delayed switch no matter what.
- Actual hotremoval: a) not implemented since none of the drivers
taking part in vgaswitcheroo correctly unplug the drm device and b)
you can't hotremove a chip from a laptop.

v2: Extend commit message with m-l discussion.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170802115604.12734-4-daniel.vetter@ffwll.ch
2017-08-11 10:48:12 +02:00
Daniel Vetter c07dcd61a0 drm: Document device unplug infrastructure
While at it, also ocd and give them a consistent drm_dev_ prefix, like
the other device instance functionality. Plus move the functions into
the right places.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170802115604.12734-3-daniel.vetter@ffwll.ch
2017-08-11 10:48:03 +02:00
Alexandru Moise 371c2279aa drm: inhibit drm drivers register to uninitialized drm core
If the DRM core fails to init for whatever reason, ensure that
no driver ever calls drm_dev_register().

This is best done at drm_dev_init() as it covers drivers that call
drm_dev_alloc() as well as drivers that prefer to embed struct
drm_device into their own device struct and call drm_dev_init()
themselves.

In my case I had so many dynamic device majors used that the major
number for DRM (226) was stolen, causing DRM core init to fail after
failing to register a chrdev, and ultimately calling debugfs_remove()
on drm_debugfs_root in drm_core_exit().

After drm core failed to init, VGEM was still calling drm_dev_register(),
ultimately leading to drm_debugfs_init(), with drm_debugfs_root passed
as the root for the new debugfs dir at debugfs_create_dir().

This led to a kernel panic once we were either derefencing root->d_inode
while it was NULL or calling root->d_inode->i_op->lookup() while it was
NULL in debugfs at inode_lock() or lookup_*().

Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170708214352.GA27205@gmail.com
2017-07-11 12:03:11 +02:00
Hans de Goede 75fb636324 drm: Fix oops + Xserver hang when unplugging USB drm devices
commit a39be606f9 ("drm: Do a full device unregister when unplugging")
causes backtraces like this one when unplugging an usb drm device while
it is in use:

usb 2-3: USB disconnect, device number 25
------------[ cut here ]------------
WARNING: CPU: 0 PID: 242 at drivers/gpu/drm/drm_mode_config.c:424
   drm_mode_config_cleanup+0x220/0x280 [drm]
...
RIP: 0010:drm_mode_config_cleanup+0x220/0x280 [drm]
...
Call Trace:
 gm12u320_modeset_cleanup+0xe/0x10 [gm12u320]
 gm12u320_driver_unload+0x35/0x70 [gm12u320]
 drm_dev_unregister+0x3c/0xe0 [drm]
 drm_unplug_dev+0x12/0x60 [drm]
 gm12u320_usb_disconnect+0x36/0x40 [gm12u320]
 usb_unbind_interface+0x72/0x280
 device_release_driver_internal+0x158/0x210
 device_release_driver+0x12/0x20
 bus_remove_device+0x104/0x180
 device_del+0x1d2/0x350
 usb_disable_device+0x9f/0x270
 usb_disconnect+0xc6/0x260
...
[drm:drm_mode_config_cleanup [drm]] *ERROR* connector Unknown-1 leaked!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 242 at drivers/gpu/drm/drm_mode_config.c:458
   drm_mode_config_cleanup+0x268/0x280 [drm]
...
<same Call Trace>
---[ end trace 80df975dae439ed6 ]---
general protection fault: 0000 [#1] SMP
...
Call Trace:
 ? __switch_to+0x225/0x450
 drm_mode_rmfb_work_fn+0x55/0x70 [drm]
 process_one_work+0x193/0x3c0
 worker_thread+0x4a/0x3a0
...
RIP: drm_framebuffer_remove+0x62/0x3f0 [drm] RSP: ffffb776c39dfd98
---[ end trace 80df975dae439ed7 ]---

After which the system is unusable this is caused by drm_dev_unregister
getting called immediately on unplug, which calls the drivers unload
function which calls drm_mode_config_cleanup which removes the framebuffer
object while userspace is still holding a reference to it.

Reverting commit a39be606f9 ("drm: Do a full device unregister
when unplugging") leads to the following oops on unplug instead,
when userspace closes the last fd referencing the drm_dev:

sysfs group 'power' not found for kobject 'card1-Unknown-1'
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2459 at fs/sysfs/group.c:237
   sysfs_remove_group+0x80/0x90
...
RIP: 0010:sysfs_remove_group+0x80/0x90
...
Call Trace:
 dpm_sysfs_remove+0x57/0x60
 device_del+0xfd/0x350
 device_unregister+0x1a/0x60
 drm_sysfs_connector_remove+0x39/0x50 [drm]
 drm_connector_unregister+0x5a/0x70 [drm]
 drm_connector_unregister_all+0x45/0xa0 [drm]
 drm_modeset_unregister_all+0x12/0x30 [drm]
 drm_dev_unregister+0xca/0xe0 [drm]
 drm_put_dev+0x32/0x60 [drm]
 drm_release+0x2f3/0x380 [drm]
 __fput+0xdf/0x1e0
...
---[ end trace ecfb91ac85688bbe ]---
BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
IP: down_write+0x1f/0x40
...
Call Trace:
 debugfs_remove_recursive+0x55/0x1b0
 drm_debugfs_connector_remove+0x21/0x40 [drm]
 drm_connector_unregister+0x62/0x70 [drm]
 drm_connector_unregister_all+0x45/0xa0 [drm]
 drm_modeset_unregister_all+0x12/0x30 [drm]
 drm_dev_unregister+0xca/0xe0 [drm]
 drm_put_dev+0x32/0x60 [drm]
 drm_release+0x2f3/0x380 [drm]
 __fput+0xdf/0x1e0
...
---[ end trace ecfb91ac85688bbf ]---

This is caused by the revert moving back to drm_unplug_dev calling
drm_minor_unregister which does:

        device_del(minor->kdev);
        dev_set_drvdata(minor->kdev, NULL); /* safety belt */
        drm_debugfs_cleanup(minor);

Causing the sysfs entries to already be removed even though we still
have references to them in e.g. drm_connector.

Note we must call drm_minor_unregister to notify userspace of the unplug
of the device, so calling drm_dev_unregister is not completely wrong the
problem is that drm_dev_unregister does too much.

This commit fixes drm_unplug_dev by not only reverting
commit a39be606f9 ("drm: Do a full device unregister when unplugging")
but by also adding a call to drm_modeset_unregister_all before the
drm_minor_unregister calls to make sure all sysfs entries are removed
before calling device_del(minor->kdev) thereby also fixing the second
set of oopses caused by just reverting the commit.

Fixes: a39be606f9 ("drm: Do a full device unregister when unplugging")
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jeffy <jeffy.chen@rock-chips.com>
Cc: Marco Diego Aurélio Mesquita <marcodiegomesquita@gmail.com>
Reported-by: Marco Diego Aurélio Mesquita <marcodiegomesquita@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170601115430.4113-1-hdegoede@redhat.com
2017-06-02 11:09:35 -04:00
Dave Airlie 94000cc329 Linux 4.10-rc8
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYoM2fAAoJEHm+PkMAQRiGr9MH/izEAMri7rJ0QMc3ejt+WmD0
 8pkZw3+MVn71z6cIEgpzk4QkEWJd5rfhkETCeCp7qQ9V6cDW1FDE9+0OmPjiphDt
 nnzKs7t7skEBwH5Mq5xygmIfkv+Z0QGHZ20gfQWY3F56Uxo+ARF88OBHBLKhqx3v
 98C7YbMFLKBslKClA78NUEIdx0UfBaRqerlERx0Lfl9aoOrbBS6WI3iuREiylpih
 9o7HTrwaGKkU4Kd6NdgJP2EyWPsd1LGalxBBjeDSpm5uokX6ALTdNXDZqcQscHjE
 RmTqJTGRdhSThXOpNnvUJvk9L442yuNRrVme/IqLpxMdHPyjaXR3FGSIDb2SfjY=
 =VMy8
 -----END PGP SIGNATURE-----

Merge tag 'v4.10-rc8' into drm-next

Linux 4.10-rc8

Backmerge Linus rc8 to fix some conflicts, but also
to avoid pulling it in via a fixes pull from someone.
2017-02-23 12:10:12 +10:00
Chris Wilson f30c92576a drm: Provide a driver hook for drm_dev_release()
Some state is coupled into the device lifetime outside of the
load/unload timeframe and requires teardown during final unreference
from drm_dev_release(). For example, dmabufs hold both a device and
module reference and may live longer than expected (i.e. the current
pattern of the driver tearing down its state and then releasing a
reference to the drm device) and yet touch driver private state when
destroyed.

v2: Export drm_dev_fini() and move the responsibility for finalizing the
drm_device and freeing it to the release callback. (If no callback is
provided, the core will call drm_dev_fini() and kfree(dev) as before.)
v3: Remember to add drm_dev_fini() to drm_drv.h
v4: Tidy language for kerneldoc
v5: Cross reference from drm_dev_init() to note that driver->release()
allows for arbitrary embedding.
v6: Refer to driver data rather than driver state, as state is now
becoming associated with the struct drm_atomic_state and friends.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[danvet: Use the proper reference for struct members, which is
&drm_driver.release.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202093632.31017-1-chris@chris-wilson.co.uk
2017-02-02 15:58:06 +01:00
Dave Airlie 012bbe28c0 Merge tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc into drm-next
Another round of -misc stuff:
- Noralf debugfs cleanup cleanup (not yet everything, some more driver
  patches awaiting acks).
- More doc work.
- edid/infoframe fixes from Ville.
- misc 1-patch fixes all over, as usual

Noralf needs this for his tinydrm pull request.

* tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
  drm/vc4: Remove vc4_debugfs_cleanup()
  dma/fence: Export enable-signaling tracepoint for emission by drivers
  drm/tilcdc: Remove tilcdc_debugfs_cleanup()
  drm/tegra: Remove tegra_debugfs_cleanup()
  drm/sti: Remove drm_debugfs_remove_files() calls
  drm/radeon: Remove drm_debugfs_remove_files() call
  drm/omap: Remove omap_debugfs_cleanup()
  drm/hdlcd: Remove hdlcd_debugfs_cleanup()
  drm/etnaviv: Remove etnaviv_debugfs_cleanup()
  drm/etnaviv: allow build with COMPILE_TEST
  drm/amd/amdgpu: Remove drm_debugfs_remove_files() call
  drm/prime: Clarify DMA-BUF/GEM Object lifetime
  drm/ttm: Make sure BOs being swapped out are cacheable
  drm/atomic: Remove drm_atomic_debugfs_cleanup()
  drm: drm_minor_register(): Clean up debugfs on failure
  drm: debugfs: Remove all files automatically on cleanup
  drm/fourcc: add vivante tiled layout format modifiers
  drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F
  drm/edid: Set AVI infoframe Q even when QS=0
  drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()
  ...
2017-02-01 08:31:09 +10:00
Daniel Vetter e6e7b48b29 drm: Don't race connector registration
I was under the misconception that the sysfs dev stuff can be fully
set up, and then registered all in one step with device_add. That's
true for properties and property groups, but not for parents and child
devices. Those must be fully registered before you can register a
child.

Add a bit of tracking to make sure that asynchronous mst connector
hotplugging gets this right. For consistency we rely upon the implicit
barriers of the connector->mutex, which is taken anyway, to ensure
that at least either the connector or device registration call will
work out.

Mildly tested since I can't reliably reproduce this on my mst box
here.

Reported-by: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484237756-2720-1-git-send-email-daniel.vetter@ffwll.ch
2017-01-30 10:17:32 +01:00
Noralf Trønnes a67834f8bf drm: drm_minor_register(): Clean up debugfs on failure
Call drm_debugfs_cleanup() in case drm_debugfs_init() fails to
cover for failure in the drm_driver.debugfs_init callback.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-3-noralf@tronnes.org
2017-01-27 08:56:50 +01:00
Daniel Vetter ef40cbf999 drm/core: Use recommened kerneldoc for struct member refs
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).

Also some minor drive-by polish where it makes sense, I read a lot
of docs ...

v2: Review from Gustavo.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-6-daniel.vetter@ffwll.ch
2017-01-25 16:22:42 +01:00
Dave Airlie 01f5e6912c omapdrm changes for 4.11
The main change here is the IRQ code cleanup, which gives us properly working
 vblank counts and timestamps. We also get much less calls to runtime PM gets &
 puts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYc1sMAAoJEPo9qoy8lh71mecP/A5LUkARdvodJ5XWaez2asjn
 MiaZ8s7hS1n6ieVPdrL916Nq5IQTwOTDX/cxFgnWEKIr/WU/le4ytX0mQBDcMqcY
 SWFVRSBD0p0iA3UmCyN03G49IhAhUGIJ/E/wYr+o/XmJ4Qdr1LY1p+Qxf3o6vSbK
 WfC3EESk5r9OIOYhBG8+uJuZ0Jxq+XuSCnZfX6tENDVEtjvsuJPjsN5spjlXDnww
 mj+Z6Xr7Myag+tsmazEyItRQhHFXE4wlkhSJv57Dj5P2zyRvXmjyeOQhpoKKuWJZ
 yO+t52HXs1qUHpG8hFG3ykka1hhyGMII7me+qeFIVLoiHpJrOyyeyvzQA9sCv3C7
 qrPICT/hbrg8bFKhSeo9iZCO55VVDfnjh4vCpIvaekwKQLnDwyTnGRahvVCUVe9u
 mNKAWhmBMJlYkpJT/cSmLbS/IinuRjYdc/Eq2ov9KbLMPOoN3KdJ+6+acY59gc+y
 R1LLAfQIb/eZY1oGYXyszMqioBVETigdqePHAlmzajfcm9355E9o6ruQUh0fIbC8
 MXBl4MpgwsbTp7IpZw1SweKPqRMuKE0Todp2Bjekmsca/HYNzV+7L4m5MnfSeLjI
 SdYuEorJTolzXaJ03SmX5BGsHQdMWjyActz7U1i7zQTSFW8Kg/6jaO392J6lowZ7
 LaHPpwvEysv2U/IsuZ8Y
 =8XSw
 -----END PGP SIGNATURE-----

Merge tag 'omapdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next

omapdrm changes for 4.11

The main change here is the IRQ code cleanup, which gives us properly working
vblank counts and timestamps. We also get much less calls to runtime PM gets &
puts.

* tag 'omapdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (26 commits)
  drm/omap: panel-sony-acx565akm.c: Add MODULE_ALIAS
  drm/omap: dsi: fix compile errors when enabling debug prints
  drm: omapdrm: Perform initialization/cleanup at probe/remove time
  drm: Move vblank cleanup from unregister to release
  drm: omapdrm: Use sizeof(*var) instead of sizeof(type) for structures
  drm: omapdrm: Remove global variables
  drm: omapdrm: Simplify IRQ wait implementation
  drm: omapdrm: Inline the pipe2vbl function
  drm: omapdrm: Don't call DISPC power handling in IRQ wait functions
  drm: omapdrm: Remove unused parameter from omap_drm_irq handler
  drm: omapdrm: Don't expose the omap_irq_(un)register() functions
  drm: omapdrm: Keep vblank interrupt enabled while CRTC is active
  drm: omapdrm: Use a spinlock to protect the CRTC pending flag
  drm: omapdrm: Prevent processing the same event multiple times
  drm: omapdrm: Check the CRTC software state at enable/disable time
  drm: omapdrm: Let the DRM core skip plane commit on inactive CRTCs
  drm: omapdrm: Replace DSS manager state check with omapdrm CRTC state
  drm: omapdrm: Handle OCP error IRQ directly
  drm: omapdrm: Handle CRTC error IRQs directly
  drm: omapdrm: Handle FIFO underflow IRQs internally
  ...
2017-01-23 10:17:06 +10:00
Chris Wilson 6098909cf2 drm: Avoid NULL dereference of drm_device.dev
For a virtual device, drm_device.dev is NULL, so becareful not to
dereference it unconditionally in core code such as drm_dev_register().

Fixes: 75f6dfe3e6 ("drm: Deduplicate driver initialization message")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161230141639.10487-1-chris@chris-wilson.co.uk
2016-12-30 15:29:44 +01:00
Daniel Vetter ea0dd85a75 drm/doc: use preferred struct reference in kernel-doc
sed -e 's/\( \* .*\)struct &\([_a-z]*\)/\1\&struct \2/' -i

Originally I wasnt a friend of this style because I thought a
line-break between the "&struct" and "foo" part would break it. But a
quick test shows that " * &struct \n * foo\n" works pefectly well with
current kernel-doc. So time to mass-apply these changes!

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-6-git-send-email-daniel.vetter@ffwll.ch
2016-12-30 13:34:59 +01:00
Gabriel Krisman Bertazi 75f6dfe3e6 drm: Deduplicate driver initialization message
Several DRM drivers print the same initialization message right after
drm_dev_register, so move that to common code.  The exception is i915,
which uses its own register handle, so let it keep its own message.

Notice that this was tested only with Exynos, but looks simple enough
for the other drivers.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161228143216.26821-2-krisman@collabora.co.uk
2016-12-30 12:37:39 +01:00
Chris Wilson e82dfa00da drm: Reduce verbosity level for drm_core_init() debug message
Currently at the end of drm_core_init() we print

[    0.735185] [drm] Initialized

which does not provide any user information and is only a breadcrumb for
developers, so reduce it from info to debug.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161229133729.32673-1-chris@chris-wilson.co.uk
2016-12-30 12:17:03 +01:00
Laurent Pinchart e57e17cc40 drm: Move vblank cleanup from unregister to release
Calling drm_vblank_cleanup() in drm_dev_unregister() causes issues with
drivers that have moved away from the .load() and .unload() midlayer.
Those drivers call drm_dev_unregister() as the first operation at unbind
time, before shutting down the device. This results in warnings due to
drm_vblank_cleanup() being called with vblank interrupts still active,
and then to vblank events being sent after cleanup.

Fix the problem by moving vblank cleanup from drm_dev_unregister() to
drm_dev_release() that is guaranteed to be called after drivers shut
down the device.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2016-12-19 11:25:05 +02:00
Daniel Vetter 010f5b9f0d Main pull request for drm for 4.10 kernel
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYT3qqAAoJEAx081l5xIa+dLMP/2dqBybSAeWlPmAwVenIHRtS
 KFNktISezFSY/LBcIP2mHkFJmjTKBMZFxWnyEJL9NmFUD1cS2WMyNnC1282h/+rD
 +P8Bsmzmt/daV4UTFxVDpzlmVlavAyakNi6FnSQfAfmf+3PB1yzU3gn8ld9pU/if
 h7KEp9fDn9eYZreTRfCUloI2yoVpD9d0DG3uaGDN/N0kGUnCC6TZT5ig5j2JO016
 fYf/DqoYAk3ItWF9WK/uG7qJIGi37afCpQq+kbSSJk+p3HjJqu8JUe9jzqYdl7j9
 26TGSY5o9WLhZkxDgbcCIJzcFJhMmXgMdhjil9lqaHmnNG5FPFU7g8DK1CZqbel9
 m8+aRPn1EgxIahMgdl8NblW1pfO2Kco0tZmoP5vXx1uqhivd67h0hiQqp66WxOJd
 i2yMLncaCEv8M161CVEgtzuI5a7nCfaZv7J9ArzbkD/huBwu51IZgTs7Dz4njgvz
 VPB5FBTB/ZYteErUNoh6gjF0hLngWvvJSPvuzT+EFO7yypek0IJ28GTdbxYSP+jR
 13697s5Itigf/D3KUdRRGsWRzyVVN9n+djkl//sy5ddL9eOlKSKEga4ujOUjTWaW
 hTvAxpK9GmJS/Iun5jIP6f75zDbi+e8FWUeB/OI2lPtnApaSKdXBTPXsco2RnTEV
 +G6XrH8IMEIsTxOk7hWU
 =7s/c
 -----END PGP SIGNATURE-----

Merge tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux into drm-misc-next

Main pull request for drm for 4.10 kernel - resync drm-misc with full
4.10 state (2 new drivers) so that we can start pulling in all the
refactorings for 4.11!

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-12-13 22:23:18 +01:00
Daniel Vetter 6449b088dd drm: Add fake controlD* symlinks for backwards compat
We thought that no userspace is using them, but oops libdrm is using
them to figure out whether a driver supports modesetting. Check out
drmCheckModesettingSupported but maybe don't because it's horrible and
totally runs counter to where we want to go with libdrm device
handling. The function looks in the device hierarchy for whether
controlD* exist using the following format string:

/sys/bus/pci/devices/%04x:%02x:%02x.%d/drm/controlD%d

The "/drm" subdirectory is the glue directory from the sysfs class
stuff, and the only way to get at it seems to through
kdev->kobj.parent (when kdev is represents e.g. the card0 chardev
instance in sysfs). Git grep says we're not the only ones touching
that, so I hope it's ok we dig into such internals - I couldn't find a
proper interface for getting at the glue directory.

Quick git grep shows that at least -amdgpu, -ati are using this.
-modesetting do not, and on -intel it's only about the 4th fallback
path for device lookup, which is why this didn't blow up earlier.

Oh well, we need to keep it working, and the simplest way is to add a
symlink at the right place in sysfs from controlD* to card*.

v2:
- Fix error path handling by adding if (!minor) return checks (David)
- Fix the controlD* numbers to match what's been there (David)
- Add a comment what exactly userspace minimally needs.
- Correct the analysis for -intel (Chris).

Fixes: 8a357d1004 ("drm: Nerf DRM_CONTROL nodes")
Cc: Dave Airlie <airlied@gmail.com>
Reported-and-tested-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161209135656.14881-1-daniel.vetter@ffwll.ch
2016-12-10 22:46:19 +01:00
Daniel Vetter d82faafd81 drm: Update drm_device docs about embedding.
It's supported now! Spotted while reviewing Chris' patch to add a
release hook.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161208102847.3063-1-daniel.vetter@ffwll.ch
2016-12-08 12:53:24 +01:00
Dave Airlie a90f58311f Merge tag 'drm-misc-next-2016-11-29' of git://anongit.freedesktop.org/git/drm-misc into drm-next
Big thing is that drm-misc is now officially a group maintainer/committer
model thing, with MAINTAINERS suitably updated. Otherwise just the usual
pile of misc things all over, nothing that stands out this time around.

* tag 'drm-misc-next-2016-11-29' of git://anongit.freedesktop.org/git/drm-misc: (33 commits)
  drm: Introduce drm_framebuffer_assign()
  drm/bridge: adv7511: Enable the audio data and clock pads on adv7533
  drm/bridge: adv7511: Add Audio support
  drm/edid: Consider alternate cea timings to be the same VIC
  drm/atomic: Constify drm_atomic_crtc_needs_modeset()
  drm: bridge: dw-hdmi: add ASoC dependency
  drm: Fix shift operations for drm_fb_helper::drm_target_preferred()
  drm: Avoid NULL dereference for DRM_LEGACY debug message
  drm: Use u64_to_user_ptr() helper for blob ioctls
  drm: Fix conflicting macro parameter in drm_mm_for_each_node_in_range()
  drm: Fixup kernel doc for driver->gem_create_object
  drm/hisilicon/hibmc: mark PM functions __maybe_unused
  drm/hisilicon/hibmc: Checking for NULL instead of IS_ERR()
  drm: bridge: add DesignWare HDMI I2S audio support
  drm: Check against color expansion in drm_mm_reserve_node()
  drm: Define drm_mm_for_each_node_in_range()
  drm/doc: Fix links in drm_property.c
  MAINTAINERS: Add link to drm-misc documentation
  vgaarb: use valid dev pointer in vgaarb_info()
  drm/atomic: Unconfuse the old_state mess in commmit_tail
  ...
2016-11-30 14:28:20 +10:00
Dave Airlie 6320745596 drm/virtio: fix busid in a different way, allocate more vbufs.
drm/qxl: various bugfixes and cleanups,
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJYMzLfAAoJEEy22O7T6HE41rIQANAEl/o8cYUoyYTJlhmmnl2U
 K+QBdr7PACdbr8RZrGpwA5ad9ZJGijpZRd2gThrzNS0JBdZI48gPEzU7V206xlyD
 AriBeAu6IkoBTEl+GGx2DfvOdLR6+7KlIrDYIpl2vILgkqlHhneXdHR3R03byRHG
 2Jrxv2YQxCs8swtAb8FRkVNaUgrfkKOKFFlx1LoLFApYeP02oSxZp0Ve4nuRNj7x
 9DCivIw4NyQ9tY1fORapmrEPTerqZnzYdb9RFSv4xilx4Stq1UWdXfTSpwXZHZaG
 VroXZb1I0fZEk1aapIxuzLZFGNSM7wLET/nK02sSvzxJJv2PiyVAabIo70nUqsQK
 H/iGT2g4MZC1Yvz6evENtckbiA1p3F9jnd+Po9ivDY/RrTpND3hVC2WbcOXWxZkb
 m69muvXfrnZwoF9xWPG8aTrCATim++1Ty8/8LoKdVq1d0Dp/Gzk8KnklBPY2vRFt
 dpxqH3jLgED/QcO5W/yQdf0kPRsrNwKFNLqP9bCF2hMIw1VHHddZtnBBXDGATXYq
 hdFA8EEg3gh/kY7V8b+GyxjRKRbveG208hu+H4EirxHmRn5xJN1VoTLk9va+AJL1
 I30l4USLDkTgf1AjYmk7yFIUTemCtwjfa0lsuu4l3rRJ3k1eBrtZe2cpWv2BoQDU
 by0sNnDelzJTQ9/v1i3J
 =OYiT
 -----END PGP SIGNATURE-----

Merge tag 'drm-qemu-20161121' of git://git.kraxel.org/linux into drm-next

drm/virtio: fix busid in a different way, allocate more vbufs.
drm/qxl: various bugfixes and cleanups,

* tag 'drm-qemu-20161121' of git://git.kraxel.org/linux: (224 commits)
  drm/virtio: allocate some extra bufs
  qxl: Allow resolution which are not multiple of 8
  qxl: Don't notify userspace when monitors config is unchanged
  qxl: Remove qxl_bo_init() return value
  qxl: Call qxl_gem_{init, fini}
  qxl: Add missing '\n' to qxl_io_log() call
  qxl: Remove unused prototype
  qxl: Mark some internal functions as static
  Revert "drm: virtio: reinstate drm_virtio_set_busid()"
  drm/virtio: fix busid regression
  drm: re-export drm_dev_set_unique
  Linux 4.9-rc5
  gp8psk: Fix DVB frontend attach
  gp8psk: fix gp8psk_usb_in_op() logic
  dvb-usb: move data_mutex to struct dvb_usb_device
  iio: maxim_thermocouple: detect invalid storage size in read()
  aoe: fix crash in page count manipulation
  lightnvm: invalid offset calculation for lba_shift
  Kbuild: enable -Wmaybe-uninitialized warnings by default
  pcmcia: fix return value of soc_pcmcia_regulator_set
  ...
2016-11-30 14:18:51 +10:00
Daniel Vetter 8a357d1004 drm: Nerf DRM_CONTROL nodes
Looking at the ioctl permission checks I noticed that it's impossible
to import gem buffers into a control nodes, and fd2handle/handle2fd
also don't work, so no joy with dma-bufs.

The only way to do anything with a control node is by drawing stuff
into a dumb buffer and displaying that. I suspect control nodes are an
entirely unused thing, and a cursory check shows that there does not
seem to be any callers of drmOpenControl nor of the other drmOpen
functions using DRM_MODE_CONTROL.

Since I don't like dead uabi, let's remove it. But since this would be
a really big change I think it's better to start out small by simply
not registering anything. We can garbage-collect the dead code later
on, once we're sure it's really not used anywhere.

Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028081050.1042-1-daniel.vetter@ffwll.ch
2016-11-17 08:41:31 +01:00
Daniel Vetter 85e634bce0 drm: Extract drm_drv.h
I want to move dumb buffer documentation into the right vfuncs, and
for that I first need to be able to pull that into kerneldoc without
having to clean up all of drmP.h. Also, header-splitting is nice.

While at it shuffle all the function declarations for drm_drv.c into
the right spots, and drop the kerneldoc for drm_minor_acquire/release
since it's only used internally.

v2: Keep all existing copyright notices (Chris).

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-11-15 12:50:30 +01:00
Gerd Hoffmann a6b5fac59c drm: re-export drm_dev_set_unique
We still need it, for virtio-gpu for example.
Partial revert of commit a742946a1b.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-11-15 09:45:30 +01:00
Joonas Lahtinen f92e1ee52a drm: Add missing mutex_destroy in drm_dev_init/release
Add 3 missing mutex_destroy to drm_dev_init teardown and
drm_dev_release.

v2:
- Also include drm_dev_release

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478785835-4142-1-git-send-email-joonas.lahtinen@linux.intel.com
Link: http://patchwork.freedesktop.org/patch/msgid/1478785835-4142-1-git-send-email-joonas.lahtinen@linux.intel.com
2016-11-11 14:10:03 +01:00
Joe Perches 6bd488db80 drm: Simplify drm_printk to reduce object size quite a bit
Remove function name and special " *ERROR*" from argument list

$ size drivers/gpu/drm/built-in.o* (x86-32 defconfig, most drm selected)
   text	   data	    bss	    dec	    hex	filename
5635366	 182579	  14328	5832273	 58fe51	drivers/gpu/drm/built-in.o.new
5779552	 182579	  14328	5976459	 5b318b	drivers/gpu/drm/built-in.o.old

Using "%ps", __builtin_return_address(0) is the same as "%s", __func__
except for static inlines, but it's more or less the same output.

Miscellanea:

o Convert args... to ##__VA_ARGS__
o The equivalent DRM_DEV_<FOO> macros are rarely used and not
  worth conversion

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/01f976d5ab93c985756fc1b2e83656fb0a2a28c8.1474856262.git.joe@perches.com
2016-10-04 08:23:14 +02:00
Tom Gundersen 0f2886057b drm: Don't swallow error codes in drm_dev_alloc()
There are many reasons other than ENOMEM that drm_dev_init() can
fail. Return ERR_PTR rather than NULL to be able to distinguish
these in the caller.

Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921145919.13754-2-teg@jklm.no
2016-09-22 04:03:48 -07:00
Tom Gundersen c6bf811a0b drm: Distinguish no name from ENOMEM in set_unique()
If passing name == NULL to drm_drv_set_unique() we now get -ENOMEM
as kstrdup() returns NULL. Instead check for this explicitly and
return -EINVAL if no name is provided.

Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921145919.13754-1-teg@jklm.no
2016-09-22 04:03:42 -07:00
David Herrmann 2cc107dc5b drm: cleanup drm_core_{init,exit}()
Various cleanups to the DRM core initialization and exit handlers:

 - Register chrdev last: Once register_chrdev() returns, open() will
   succeed on the given chrdevs. This is usually not an issue, as no
   chardevs are registered, yet. However, nodes can be created by
   user-space via mknod(2), even though such major/minor combinations are
   unknown to the kernel. Avoid calling into drm_stub_open() in those
   cases.
   Again, drm_stub_open() would just bail out as the inode is unknown,
   but it's really non-obvious if you hack on drm_stub_open().

 - Unify error-paths into just one label. All the error-path helpers can
   be called even though the constructors were not called yet, or failed.
   Hence, just call all cleanups unconditionally.

 - Call into drm_global_release(). This is a no-op, but provides
   debugging helpers in case there're GLOBALS left on module unload. This
   function was unused until now.

 - Use DRM_ERROR() instead of printk(), and also print the error-code on
   failure (even if it is static!).

 - Don't throw away error-codes of register_chrdev()!

 - Don't hardcode -1 as errno. This is just plain wrong.

 - Order exit-handlers in the exact reverse order of initialization
   (except if the order actually matters for syncing-reasons, which is
   not the case here, though).

v2:
 - Call drm_core_exit() directly from the init-error-handler. Requires to
   drop __exit annotation, though.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160901124837.680-7-dh.herrmann@gmail.com
2016-09-19 13:57:39 +02:00
David Herrmann 82d5e73f6b drm: drop obsolete drm_core.h
The drm_core.h header contains a set of constants meant to be used
throughout DRM. However, as it turns out, they're each used just once and
don't bring any benefit. They're also grossly mis-named and lack
name-spacing. This patch inlines them, or moves them into drm_internal.h
as appropriate:

 - CORE_AUTHOR and CORE_DESC are inlined into corresponding MODULE_*()
   macros. It's just confusing having to follow 2 pointers when trying to
   find the definition of these fields. Grep'ping for MODULE_AUTHOR()
   should reveal the full information, if there's no strong reason not to.

 - CORE_NAME, CORE_DATE, CORE_MAJOR, CORE_MINOR, and CORE_PATCHLEVEL are
   inlined into the sysfs 'version' attribute. They're stripped
   everywhere else (which is just some printk() statements). CORE_NAME
   just doesn't make *any* sense, as we hard-code it in many places,
   anyway. The other constants are outdated and just serve
   binary-compatibility purposes. Hence, inline them in 'version' sysfs
   attribute (we might even try dropping it..).

 - DRM_IF_MAJOR and DRM_IF_MINOR are moved into drm_internal.h as they're
   only used by the global ioctl handlers. Furthermore, versioning
   interfaces breaks backports and as such is deprecated, anyway. We just
   keep them for historic reasons. I doubt anyone will ever modify them
   again.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160901124837.680-6-dh.herrmann@gmail.com
2016-09-19 13:57:38 +02:00
Chris Wilson b4ba97e767 drm: Avoid calling dev_printk(.dev = NULL)
Since dev_printk likes to print "(NULL device *):" when passed in a NULL
pointer, we have to manually call printk() ourselves.

Fixes: c4e68a5832 ("drm: Introduce DRM_DEV_* log messages")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160819073750.16610-1-chris@chris-wilson.co.uk
2016-08-22 12:05:06 -04:00
Sean Paul c4e68a5832 drm: Introduce DRM_DEV_* log messages
This patch consolidates all the various log functions/macros into
one uber function, drm_log. It also introduces some new DRM_DEV_*
variants that print the device name to delineate multiple devices
of the same type.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1471303084-3757-1-git-send-email-seanpaul@chromium.org
2016-08-18 09:37:10 -07:00
David Herrmann a3ccc46166 drm: rename DRM_MINOR_LEGACY to DRM_MINOR_PRIMARY
The minor referred to by "DRM_MINOR_LEGACY" is called 'dev->primary' and
gets 'cardX' as name assigned. Lets reduce this magnificent number of
names for the same concept by one and rename DRM_MINOR_LEGACY to
DRM_MINOR_PRIMARY (to match the actual struct-member name).

Furthermore, this is in no way a legacy node, so lets not call it that.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160803180432.1341-2-dh.herrmann@gmail.com
2016-08-08 10:05:20 +02:00
Chris Wilson a39be606f9 drm: Do a full device unregister when unplugging
Rather than do a partial unregister of just the minors, unregister the
device (drm_dev_unregister(), and so remove all userspace interfaces,
when the device is unplugged (drm_unplug_dev()).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466778982-6974-3-git-send-email-chris@chris-wilson.co.uk
2016-07-12 13:01:49 +02:00
Daniel Vetter a742946a1b drm: Don't call drm_dev_set_unique from platform drivers
Since

commit e112e593b2
Author: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Date:   Fri Dec 11 11:20:28 2015 +0100

    drm: use dev_name as default unique name in drm_dev_alloc()

we're using a reasonable default which should work for everyone. Only
mtk, rcar-du and sun4i are affected, and as kms-only drivers without
any rendering support no one should ever care about the unique name

v2: Rebase on top of mediatek.

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-5-git-send-email-daniel.vetter@ffwll.ch
2016-06-21 21:43:41 +02:00