Commit Graph

487 Commits

Author SHA1 Message Date
Alan Stern fde4e2f732 HID: fix suspend crash by moving initializations earlier
Although the usbhid driver allocates its usbhid structure in the probe
routine, several critical fields in that structure don't get
initialized until usbhid_start().  However if report descriptor
parsing fails then usbhid_start() is never called.  This leads to
problems during system suspend -- the system will freeze.

This patch (as1378) fixes the bug by moving the initialization
statements up into usbhid_probe().

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Bruno Prémont <bonbons@linux-vserver.org>
Tested-By: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-07 23:33:52 +02:00
Antonio Ospite fddb33f2e8 HID: sony: fix sony_set_operational_bt
Don't send the report type as part of the data, this prevents the
controller from going into the operational state at all.

This is completely equivalent to what the code originally meant to accomplish:
as per in net/bluetooth/hidp/core.c::hidp_output_raw_report(), by using
HID_FEATURE_REPORT here, what will be actually sent is
(HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE) which is exactly 0x53.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-03 17:19:03 +02:00
Rafi Rubin ed7e2ca24b HID: ntrig: Remove unused macro, TripleTap and QuadTap
Removing the higher number taps.  Their usage was incorrect
and even if correct they should not be used for a touch screen.
_MT_ events should be used to communicate multiple fingers.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-03 15:23:11 +02:00
Rafi Rubin 250d377522 HID: ntrig: TipSwitch for single touch mode touch.
Include TipSwitch in the touch detection decision for some single touch
firmwares.  Confidence and InRange are high for all finger events
including those used to indicate the finger is no longer in contact with
the sensor.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-03 15:23:11 +02:00
Alan Ott 5a38f2c7c4 HID: hidraw: fix numbered reports
Make hidraw not stick an extra byte on the beginning of an IN transfer
when a HID device contains multiple reports.

Signed-off-by: Alan Ott <alan@signal11.us>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-27 10:22:53 +02:00
Cory Fields c85b86a6dc HID: wacom: remove annoying non-error printk
This is the only line printed on my "quiet" boot and seems completely
unnecessary.

Signed-off-by: Cory Fields <FOSS@AtlasTechnologiesInc.com>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-21 23:29:02 +02:00
Rafi Rubin 2170c5a8ae HID: ntrig: Emit TOUCH with DOUBLETAP for single touch
I squelched TipSwitch in a recent patch which resulted in the loss
of Touch events for single touch firmwares.  This patch just puts Touch back
in for single touch, and bundles it with DoubleTap (like the multitouch code).
The two events are used to convey the same message to different drivers.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-13 15:22:59 +02:00
Raphaël Doursenaud 1ce31b255c HID: add support for cymotion master solar keyboard
Support the solar version of the Cherry's cymotion keyboard line using
existing cherry driver.

Signed-off-by: Raphaël Doursenaud <rdoursenaud@free.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-08 13:40:52 +02:00
Jiri Kosina c0858552c0 HID: ntrig: explain firmware quirk
Commit 6549981bc5 ("HID: fix N-trig touch panel with recent firmware")
adds a quirk that is needed for devices with more recent firmware so that
they become operational.

As it's not directly obvious from the code why is it needed, a comment
is worthwile.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-07 12:10:29 +02:00
Stephane Chatty 6549981bc5 HID: fix N-trig touch panel with recent firmware
Added an init message that avoids device freeze with recent firmware.

Signed-off-by: Stephane Chatty <chatty@enac.fr>
Tested-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-06 23:14:07 +02:00
Tejun Heo 336f5899d2 Merge branch 'master' into export-slabh 2010-04-05 11:37:28 +09:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Anisse Astier c565c54d9b HID: Add NOGET quirk for Quanta Pixart touchscreen
Add the NOGET quirk for the Quanta optical touchscreen present on MSI AE2220,
Otherwise, the hid-quanta driver timeouts at load time:

drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
quanta-touch 0003:0408:3001.0003: timeout initializing reports
input: PixArt Imaging Inc. Optical Touch Screen as /class/input/input7
quanta-touch 0003:0408:3001.0003: input: USB HID v1.10 Device [PixArt Imaging Inc. Optical Touch Screen] on usb-0000:00:06.0-2/input0

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-29 16:32:57 +02:00
Jiri Kosina d8e4ebf8b6 HID: fix oops in gyration_event()
Fix oops caused by dereferencing field->hidinput in cases where
the device hasn't been claimed by hid-input.

Reported-by: Andreas Demmer <mail@andreas-demmer.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-23 16:32:37 +01:00
Linus Torvalds c6b9e73f2f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: avoid '\0' in hid debugfs events file
  HID: Add RGT Clutch Wheel clutch device id
  HID: ntrig: fix touch events
  HID: add quirk for UC-Logik WP4030 tablet
  HID: magicmouse: fix oops after device removal
2010-03-18 16:52:31 -07:00
Bruno Prémont e639ba481b HID: avoid '\0' in hid debugfs events file
When dumping /sys/kernel/debug/hid/$device/events '\0' characters show up
(invisible if cat to console but shown by less or while looking at a dump
 file).  These are due to hid_debug_event() adding strlen()+1 bytes to the ring
buffer (e.g. including the trailing '\0').  Any roll-over causes a '\0' as well
as hid_debug_event() handles the ring buffers with HID_DEBUG_BUFSIZE-1 size
while hid_debug_events_read() handles it with full HID_DEBUG_BUFSIZE size.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-16 13:36:01 +01:00
Markus Rathgeb 3ee8f0a2b1 HID: Add RGT Clutch Wheel clutch device id
This patch enables force feedback for the "RGT Force Feedback CLUTCH Racing Wheel".
It only modifies hid-core.c (hid_blacklist) and hid-tmff.c to add the new USB IDs.

Signed-off-by: Markus Rathgeb <rathgeb.markus@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-13 23:30:02 +01:00
Rafi Rubin 2886539d5e HID: ntrig: fix touch events
This reinstates the lost unpressing of BTN_TOUCH.  To prevent undesireably
touch toggles this also deals with tip switch events.

Added a trap to prevent going out of bounds for hidinputs with empty reports.

Clear bits of unused buttons which result in misidentification.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-10 16:10:28 +01:00
Andrej Gelenberg eff7f270e9 HID: add quirk for UC-Logik WP4030 tablet
Add HID_QUIRK_MULTI_INPUT for UC-Logik tablet.

$ lsusb
...
Bus 004 Device 002: ID 5543:0003 UC-Logic Technology Corp. Genius MousePen 4x3 Tablet/Aquila L1 Tablet

Signed-off-by: Andrej Gelenberg <andrej.gelenberg@udo.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-09 13:49:54 +01:00
Michael Poole 28918c211d HID: magicmouse: fix oops after device removal
Ask the HID core not to register an input device for the mouse.
Fix an oops after removing the device, due to leaving the new
input device registered.

Signed-off-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-09 13:42:19 +01:00
Dmitry Torokhov 58b939959d Input: scancode in get/set_keycodes should be unsigned
The HID layer has some scan codes of the form 0xffbc0000 for logitech
devices which do not work if scancode is typed as signed int, so we need
to switch to unsigned it instead. While at it keycode being signed does
not make much sense either.

Acked-by: Márton Németh <nm127@freemail.hu>
Acked-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-08 23:19:15 -08:00
Oliver Neukum 86266452f8 USB: Push BKL on open down into the drivers
Straightforward push into the drivers to allow
auditing individual drivers separately

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:54:23 -08:00
Jiri Kosina 14ef2b0c02 Merge branches 'upstream', 'raw_report_modifications' and 'apple_magic_mouse' into for-linus
Conflicts:
	drivers/hid/Kconfig
2010-02-25 17:39:16 +01:00
Jiri Kosina 57ab12e418 HID: usbhid: initialize interface pointers early enough
Move the initialization of USB interface pointers from _start()
over to _probe() callback, which is where it belongs.

This fixes case where interface is NULL when parsing of report
descriptor fails.

LKML-Reference: <20100213135720.603e5f64@neptune.home>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-17 14:25:01 +01:00
Jiri Kosina 7f978b9bf5 HID: extend mask for BUTTON usage page
Now that joystick button usages can expand over 15 buttons, we
have to properly mask out the code from hid usage to cover the
whole 0xffff available space.

Reported-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-17 09:36:35 +01:00
Rafi Rubin ff5cf34c80 HID: hid-ntrig: Single touch mode tap
Add DOUBLETAP to events emitted when in single touch only mode.

Users with a single touch firmware report not seeing the DOUBLETAP events; this
is a side effect of dropping old mapping for confidence. The confidence mapping
may be fine for singletouch mode but causes problems in multitouch mode.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-16 17:56:20 +01:00
Rafi Rubin dbf2b17de5 HID: hid-ntrig: multitouch cleanup and fix
This cleans up the identification of multitouch groups and enables
the end of group sync.

Taps are now explicitly handled to adjust for the changes in the
event stream in multitouch mode.  Added triple and quad tap for the
benefit of tools that recognize different tap types but do not have
full multi touch support.

This cleans up the behavior particularly for the latest firmware, which
didn't work particularly well with the older version of the driver.

In this form, when multitouch is active, both mt and st events will come out of
the "N-Trig MultiTouch" device.  And when its not st events will come out of
"N-Trig Touchscreen".

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-16 13:54:23 +01:00
Rafi Rubin b0549cf1a3 HID: n-trig: remove unnecessary tool switching
With the pen and touch split apart, we no longer need to inject
additional tool switching events.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-16 13:53:52 +01:00
Rafi Rubin 943ed464f3 HID: hid-ntrig add multi input quirk and clean up
Added a quirk to enable distinct input devices.  The digitizer utilizes
three inputs to represent pen, multitouch and a normal touch screen.

With the Pen partitioned, it behaves well and does not need special
handling.

Also, I set names to the input devices to clarify the functions of the
various inputs.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-16 13:53:22 +01:00
Oliver Neukum 858155fbcc HID: usbhid: introduce timeout for stuck ctrl/out URBs
Some devices do not react to a control request (seen on APC UPS's) resulting in
a slow stream of messages, "generic-usb ... control queue full".  Therefore
request needs a timeout.

Cc: stable@kernel.org
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-12 13:07:51 +01:00
Michael Poole 71b38bd4c1 HID: magicmouse: coding style and probe failure fixes
Use proper values to initialize bool configuration variables, tabs rather than
spaces, no braces for one-line else clause, __set_bit() when the operation
doesn't have to be atomic, input_set_abs_params() rather than writing the
fields directly, and call hid_hw_stop() when appropriate to handle failures in
the probe.

Signed-off-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-11 11:22:35 +01:00
Jiri Kosina c8a8602b76 HID: remove MODULE_VERSION from new drivers
MODULE_VERSION doesn't make too much sense for drivers merged
into main tree, as git is much better tracking revisions than
any developer might ever be.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-10 15:29:02 +01:00
Jiri Kosina 9f52314723 HID: fix up Kconfig entry for MagicMouse
Make Apple MagicMouse Kconfig entry consistent with other dirvers.
Also expand the tristate text a little bit more, so that it doesn't
clash with already existing HID_APPLE.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-10 14:59:03 +01:00
Michael Poole 128537cea4 HID: add a device driver for the Apple Magic Mouse.
The Magic Mouse requires that a driver send an unlock Report(Feature) command,
similar to the Wacom wireless tablet and Sixaxis controller quirks.  This turns
on an Input Report that isn't published in the input Report descriptor that
contains touch data (and usually overrides the normal motion and click Report).

Because the mouse has only one switch and no scroll wheel, the driver
(under control of parameters) emulates a middle button and scroll wheel.
User space could also ignore and/or re-synthesize those events based on
the reported events.

Some user-space tools to talk to the mouse directly (that is, when it is not
associated with the host's HIDP stack) are at
http://github.com/entrope/linux-magicmouse

Signed-off-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-10 14:57:33 +01:00
Michael Poole 90a006abf8 HID: Export hid_register_report
The Apple Magic Mouse (and probably other devices) publish reports that are not
called out in their HID report descriptors -- they only send them when enabled
through other writes to the device.  This allows a driver to handle these
unlisted reports.

Signed-off-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-10 14:57:30 +01:00
Stephane Chatty 77f720b71d HID: Support for MosArt multitouch panel
Added support for MosArt dual-touch panels, present in the Asus T91MT notebook.

Signed-off-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-10 14:52:12 +01:00
Stephane Chatty 580363db92 HID: add pressure support for the Stantum multitouch panel
Added pressure handling for Stantum multitouch panels

Signed-off-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-10 12:12:43 +01:00
Stephane Chatty b32758c721 HID: fixed bug in single-touch emulation on the stantum panel
Fixed stupid copy-paste bug in touchscreen emulation for the Stantum multitouch
panel: a flag was reset just before being tested.

Signed-off-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-10 12:09:17 +01:00
Bastien Nocera eabe5c9058 HID: fix typo in error message
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-09 11:43:19 +01:00
Leo P White 0690535d6b HID: add mapping for "AL Network Chat" usage
Adding a mapping for the 'AL Network Chat' usage from the 'Consumer' usage
page (USB HID Usage Tables v1.11). This usage is used by some keyboards for
a multimedia key.

Signed-off-by: Leo P White <lpw25@cam.ac.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-09 11:23:00 +01:00
Thadeu Lima de Souza Cascardo c2c3489c5b HID: use multi input quirk for TouchPack touchscreen
This device generates ABS_Z and ABS_RX events, while it should be
generating ABS_X and ABS_Y instead. Using the MULTI_INPUT quirk solves
this issue.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Daniel Oliveira Nascimento <don@syst.com.br>
[jkosina@suse.cz: fixed blacklist ordering while resolving conflict]
[jkosina@suse.cz: fixed typo to make it compile]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-04 18:50:23 +01:00
Jiri Kosina 2dbf209d7a HID: make full-fledged hid-bus drivers properly selectable
For historical reasons, we don't have most of the in-tree
drivers residing on hid-bus properly selectable in kernel
configuration unless CONFIG_EMBEDDED is set.

This has been introduced on Linus' request from 14 Oct

===
As to the Kconfig options - do they really add so much space that you need to
ask for the quirks? You didn't use to. Can you make the questions depend on
EMBEDDED, or at least on the HID_COMPAT thing or whatever?
===

This still makes perfect sense for small and tiny drivers, which
just fix report descriptors, fix up HID->input mappings that slightly
violates HUT standard, send one extra packet to the device that is
needed before it becomes functional, etc.

Since then, we have been gathering more and more HID-bus drivers,
which are full-fledged drivers. For these, the size argument becomes
more valid. Plus the devices are much more special than "just violates
HID specification in this one or two tiny unimportant points".

Therefore I am marking such drivers as properly selectable no matter
the setting of CONFIG_EMBEDDED, while keeping all the small and tiny
ones compiled by default.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03 16:23:45 +01:00
Jiri Kosina 342f31e84e HID: make Wacom modesetting failures non-fatal
With Wacom tablet mode-setting moved from userspace into kernel,
we don't have to consider failures of device queries through the
_raw callback as hard failure, as the driver can safely continue
anyway.

This is consistent with the current USB driver in wacom_sys.c

Reported-by: Ping Cheng <pinglinux@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03 15:52:31 +01:00
Bastien Nocera f9ce7c283c HID: Enable Sixaxis controller over Bluetooth
Now that hid_output_raw_report works, port the PS3 Sixaxis
Bluetooth quirk from user-space, into kernel-space.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03 15:47:53 +01:00
Bastien Nocera 46a709b900 HID: Implement Wacom quirk in the kernel
The hid-wacom driver required user-space to poke at the tablet
to make it send data about the cursor location.

This patch makes it do the same thing but in the kernel.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03 15:45:49 +01:00
Jiri Kosina d4bfa033ed HID: make raw reports possible for both feature and output reports
In commit 2da31939a4 ("Bluetooth: Implement raw output support for HIDP
layer"), support for Bluetooth hid_output_raw_report was added, but it
pushes the data to the intr socket instead of the ctrl one. This has been
fixed by 6bf8268f9a ("Bluetooth: Use the control channel for raw HID reports")

Still, it is necessary to distinguish whether the report in question should be
either FEATURE or OUTPUT. For this, we have to extend the generic HID API,
so that hid_output_raw_report() callback provides means to specify this
value so that it can be passed down to lower level hardware drivers (currently
Bluetooth and USB).

Based on original patch by Bastien Nocera <hadess@hadess.net>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03 15:41:52 +01:00
Alex Neblett f54405db66 HID: add support for Pixart Imaging Optical Touch Screen
Added support for the Pixart Imaging Inc. Optical Touch Screen found in the MSI
AE2220 and other new all in one computers to the Quanta Optical Touch
dual-touch panel driver found in the latest git clone
git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git.

Signed-off-by: Alex Neblett <alexneblett01@yahoo.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03 12:03:26 +01:00
Jiri Kosina e1a0bdd802 Merge branch 'master' into upstream
Conflicts:
	drivers/hid/hid-ids.h
2010-02-02 23:10:39 +01:00
Thadeu Lima de Souza Cascardo 8127f4e883 HID: use multi input quirk for eTurboTouch touchscreen
This device generates ABS_Z and ABS_RX events, while it should be
generating ABS_X and ABS_Y instead. Using the MULTI_INPUT quirk solves
this issue.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Daniel Oliveira Nascimento <don@syst.com.br>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-02 23:05:38 +01:00
Alexander Shishkin 1c3a02c215 HID: add NOGET quirk for Prodige Cordless Combo
I happen to own a keyboard identified as 05af:3062 which is labeled as
"FlatX Coldless Combo" by "Prodige", which exhibits input problems without
NOGET quirk. For some reason, lsusb reports this device as "Jing-Mold
Enterprise Co., Ltd", which is not mentioned anywhere on the package.
A quick search on the intenet shows that there a other people who have
this in their lsusb output, but apparently they don't have the problem
I am seeing (or they are not such furious typists as myself).

Signed-off-by: Alexander Shishkin <virtuoso@slind.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-02 21:30:34 +01:00