Commit Graph

357 Commits

Author SHA1 Message Date
Grant Likely 3650b0a304 ppc: fix AT_VECTOR_SIZE on arch/ppc
Commit 4f9a58d75b ("increase
AT_VECTOR_SIZE to terminate saved_auxv properly") changes the size of
AT_VECTOR_SIZE from hard coded '44' to a calculation based on the value
of AT_VECTOR_SIZE_ARCH and AT_VECTOR_SIZE_BASE.

The change works for arch/powerpc, but it breaks arch/ppc because the
needed AT_VECTOR_SIZE_ARCH is not present in include/asm-ppc/system.h
and a default value of 0 is used instead.  This results in
AT_VECTOR_SIZE being too small and it causes a kernel crash on loading
init.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 19:18:54 -07:00
Jiri Slaby 1977f03272 remove asm/bitops.h includes
remove asm/bitops.h includes

including asm/bitops directly may cause compile errors. don't include it
and include linux/bitops instead. next patch will deny including asm header
directly.

Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:41 -07:00
Ralf Baechle e8c44319c6 Replace __attribute_pure__ with __pure
To be consistent with the use of attributes in the rest of the kernel
replace all use of __attribute_pure__ with __pure and delete the definition
of __attribute_pure__.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:32 -07:00
Linus Torvalds c548f08a4f Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (24 commits)
  [POWERPC] Fix vmemmap warning in init_64.c
  [POWERPC] Fix 64 bits vDSO DWARF info for CR register
  [POWERPC] Add 1TB workaround for PA6T
  [POWERPC] Enable NO_HZ and high res timers for pseries and ppc64 configs
  [POWERPC] Quieten cache information at boot
  [POWERPC] Quieten clockevent printk
  [POWERPC] Enable SLUB in *_defconfig
  [POWERPC] Fix 1TB segment detection
  [POWERPC] Fix iSeries_hpte_insert prototype
  [POWERPC] Fix copyright symbol
  [POWERPC] ibmebus: Move to of_device and of_platform_driver, match eHCA and eHEA drivers
  [POWERPC] ibmebus: Add device creation and bus probing based on of_device
  [POWERPC] ibmebus: Remove bus match/probe/remove functions
  [POWERPC] Move of_device allocation into of_device.[ch]
  [POWERPC] mpc52xx: device tree changes for FEC and MDIO
  [POWERPC] bestcomm: GenBD task support
  [POWERPC] bestcomm: FEC task support
  [POWERPC] bestcomm: ATA task support
  [POWERPC] bestcomm: core bestcomm support for Freescale MPC5200
  [POWERPC] mpc52xx: Update mpc52xx_psc structure with B revision changes
  ...
2007-10-17 09:05:55 -07:00
Ralf Baechle 622a9edd91 Remove dma_cache_(wback|inv|wback_inv) functions
dma_cache_(wback|inv|wback_inv) were the earliest attempt on a generalized
cache managment API for I/O purposes.  Originally it was basically the raw
MIPS low level cache API exported to the entire world.  The API has
suffered from a lack of documentation, was not very widely used unlike it's
more modern brothers and can easily be replaced by dma_cache_sync.  So
remove it rsp.  turn the surviving bits back into an arch private API, as
discussed on linux-arch.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Kyle McMartin <kyle@parisc-linux.org>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:57 -07:00
Jan Beulich 9c6cdad7fe cleanup floppy.h
AUTO_DMA and FLOPPY_MOTOR_MASK in include/asm-*/floppy.h are dead symbols -
remove them.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:55 -07:00
Ingo Molnar ad3b82795f softlockup: make asm/irq_regs.h available on every platform
The softlockup detector would like to use get_irq_regs(), so generalize the
availability on every Linux architecture.

(It is fine for an architecture to always return NULL to get_irq_regs(),
which it does by default.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Ian Molton <spyro@f2s.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:47 -07:00
Sylvain Munaut 07e6e93136 [POWERPC] mpc52xx: Update mpc52xx_psc structure with B revision changes
On the mpc5200b the ccr register is 32 bits wide while on the
mpc5200 it's only 16 bits. It's up to the driver to use the
correct format depending on the chip it's running on.

The 5200b also offers some more registers & status in AC97
mode. Again, if not running on a 5200b the driver should not
use those.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-10-16 17:09:27 -06:00
Robert P. J. Day 20b31b53ea [POWERPC] Prevent direct inclusion of <asm/rwsem.h>.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-22 14:49:21 +10:00
Adrian Bunk e6b6e3ffb9 [POWERPC] Remove APUS support from arch/ppc
Current status of APUS:
- arch/powerpc/: removed in 2.6.23
- arch/ppc/: marked BROKEN since 2 years

This therefore removes the remaining parts of APUS support from
arch/ppc, include/asm-ppc, arch/powerpc and include/asm-powerpc.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-17 15:15:04 +10:00
Scott Wood 5a24e1a177 [PPC] Add clrbits8 and setbits8.
These I/O accessors will be used in code under drivers/,
which is expected to still work in arch/ppc.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:43 -05:00
Kumar Gala 33d71d26ba [POWERPC] Copy over headers from arch/ppc to arch/powerpc that we need
To build arch/powerpc without including asm-ppc/ we need these files
in asm-powerpc/

Moved some headers under arch/powerpc/platforms if they were only used by
platform or driver files and fixed up the source file includes to match
the new locations

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22 22:43:29 -05:00
Stephen Rothwell 0b8188a44d [POWERPC] Remove get_property and device_is_compatible
They were only needed for backwards compatibility and all in tree uses
have now been changed.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:58 +10:00
Dale Farnsworth 7e07a15913 [WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support
Add support for arch/powerpc, specifically for the prpmc2800 platform.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 21:16:02 +00:00
Dale Farnsworth 422db8d229 [WATCHDOG] mv64x60_wdt: set up platform_device in platform code
The driver previously registered its platform device data in its own
init function--that's bogus.  Move that code to platform-specific
code in arch/ppc.  This is being done so that the platform code can
decide at runtime whether to initialize this driver or not.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-24 18:56:35 +00:00
Josh Boyer dd68c048d7 [POWERPC] Fix ARCH=ppc builds
The recent signal rework broke ARCH=ppc builds with the following
error:

CC      arch/powerpc/kernel/signal.o
arch/powerpc/kernel/signal.c: In function ‘do_signal’:
arch/powerpc/kernel/signal.c:142: error: implicit declaration of
function ‘set_dabr’
make[1]: *** [arch/powerpc/kernel/signal.o] Error 1

This fixes it by including a function prototype in asm-ppc/system.h.

Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-22 21:30:58 +10:00
Ralf Baechle c41917df8a [PATCH] sched: sched_cacheflush is now unused
Since Ingo's recent scheduler rewrite which was merged as commit
0437e109e1 sched_cacheflush is unused.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-19 21:28:35 +02:00
Martin Schwidefsky e21ea246bc mm: remove ptep_test_and_clear_dirty and ptep_clear_flush_dirty
Nobody is using ptep_test_and_clear_dirty and ptep_clear_flush_dirty.  Remove
the functions from all architectures.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:22:59 -07:00
Jan Beulich 45e98cdb6d page table handling cleanup
Kill pte_rdprotect(), pte_exprotect(), pte_mkread(), pte_mkexec(), pte_read(),
pte_exec(), and pte_user() except where arch-specific code is making use of
them.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:36 -07:00
Jan Beulich caa5171622 PCI: remove pci_dac_dma_... APIs
Based on replies to a respective query, remove the pci_dac_dma_...() APIs
(except for pci_dac_dma_supported() on Alpha, where this function is used
in non-DAC PCI DMA code).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Acked-by: David Miller <davem@davemloft.net>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:11 -07:00
Michael Ellerman 575e3348cb PCI: Use a weak symbol for the empty version of pcibios_add_platform_entries()
I'm not sure if this is going to fly, weak symbols work on the compilers I'm
using, but whether they work for all of the affected architectures I can't say.
I've cc'ed as many arch maintainers/lists as I could find.

But assuming they do, we can use a weak empty definition of
pcibios_add_platform_entries() to avoid having an empty definition on every
arch.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:07 -07:00
Benjamin Herrenschmidt 8dab5241d0 Rework ptep_set_access_flags and fix sun4c
Some changes done a while ago to avoid pounding on ptep_set_access_flags and
update_mmu_cache in some race situations break sun4c which requires
update_mmu_cache() to always be called on minor faults.

This patch reworks ptep_set_access_flags() semantics, implementations and
callers so that it's now responsible for returning whether an update is
necessary or not (basically whether the PTE actually changed).  This allow
fixing the sparc implementation to always return 1 on sun4c.

[akpm@linux-foundation.org: fixes, cleanups]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: David Miller <davem@davemloft.net>
Cc: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Acked-by: William Lee Irwin III <wli@holomorphy.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-16 13:16:16 -07:00
Paul Mackerras 2ecf042ef5 Merge branch 'linux-2.6' 2007-05-10 21:08:37 +10:00
Kumar Gala b99ab6a8c7 [POWERPC] User rheap from arch/powerpc/lib
Removed rheap in arch/ppc/lib and changed build system to use the
one in arch/powerpc/lib.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09 23:28:17 -05:00
Timur Tabi 4c35630ccd [POWERPC] Change rheap functions to use ulongs instead of pointers
The rheap allocation functions return a pointer, but the actual value is based
on how the heap was initialized, and so it can be anything, e.g. an offset
into a buffer.  A ulong is a better representation of the value returned by
the allocation functions.

This patch changes all of the relevant rheap functions to use a unsigned long
integers instead of a pointer.  In case of an error, the value returned is
a negative error code that has been cast to an unsigned long.  The caller can
use the IS_ERR_VALUE() macro to check for this.

All code which calls the rheap functions is updated accordingly.  Macros
IS_MURAM_ERR() and IS_DPERR(), have been deleted in favor of IS_ERR_VALUE().

Also added error checking to rh_attach_region().

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09 23:01:43 -05:00
John Anthony Kazos Jr 121e70b69a include files: convert "include" subdirectory to UTF-8
Convert the "include" subdirectory to UTF-8.

Signed-off-by: John Anthony Kazos Jr. <jakj@j-a-k-j.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:58:21 +02:00
Jeff Dike 5dc12ddee9 Remove tas()
tas() has no users, so get rid of it.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:20 -07:00
Mathieu Desnoyers 2856f5e31c atomic.h: atomic_add_unless as inline. Remove system.h atomic.h circular dependency
atomic_add_unless as inline. Remove system.h atomic.h circular dependency.
I agree (with Andi Kleen) this typeof is not needed and more error
prone. All the original atomic.h code that uses cmpxchg (which includes
the atomic_add_unless) uses defines instead of inline functions,
probably to circumvent a circular dependency between system.h and
atomic.h on powerpc (which my patch addresses). Therefore, it makes
sense to use inline functions that will provide type checking.

atomic_add_unless as inline. Remove system.h atomic.h circular dependency.
Digging into the FRV architecture shows me that it is also affected by
such a circular dependency. Here is the diff applying this against the
rest of my atomic.h patches.

It applies over the atomic.h standardization patches.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:20 -07:00
David Gibson 0bb5e19d63 Clean up mostly unused IOSPACE macros
Most architectures defined three macros, MK_IOSPACE_PFN(), GET_IOSPACE()
and GET_PFN() in pgtable.h.  However, the only callers of any of these
macros are in Sparc specific code, either in arch/sparc, arch/sparc64 or
drivers/sbus.

This patch removes the redundant macros from all architectures except
sparc and sparc64.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:13 -07:00
Christoph Hellwig 1eeb66a1bb move die notifier handling to common code
This patch moves the die notifier handling to common code.  Previous
various architectures had exactly the same code for it.  Note that the new
code is compiled unconditionally, this should be understood as an appel to
the other architecture maintainer to implement support for it aswell (aka
sprinkling a notify_die or two in the proper place)

arm had a notifiy_die that did something totally different, I renamed it to
arm_notify_die as part of the patch and made it static to the file it's
declared and used at.  avr32 used to pass slightly less information through
this interface and I brought it into line with the other architectures.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix vmalloc_sync_all bustage]
[bryan.wu@analog.com: fix vmalloc_sync_all in nommu]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: <linux-arch@vger.kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:04 -07:00
Jeremy Fitzhardinge d6dd61c831 [PATCH] x86: PARAVIRT: add hooks to intercept mm creation and destruction
Add hooks to allow a paravirt implementation to track the lifetime of
an mm.  Paravirtualization requires three hooks, but only two are
needed in common code.  They are:

arch_dup_mmap, which is called when a new mmap is created at fork

arch_exit_mmap, which is called when the last process reference to an
  mm is dropped, which typically happens on exit and exec.

The third hook is activate_mm, which is called from the arch-specific
activate_mm() macro/function, and so doesn't need stub versions for
other architectures.  It's called when an mm is first used.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: linux-arch@vger.kernel.org
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
2007-05-02 19:27:14 +02:00
Grant Likely 8c38fc2b74 [POWERPC] Stop using ppc_sys for Xilinx Virtex boards
The arch/ppc/syslib/ppc_sys.c infrastructure does not work well for the
virtex ports.  Move the ml300 and ml403 board ports over to use the new
virtex_devices infrastructure.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30 11:02:04 +10:00
Grant Likely 5ff084f21d [POWERPC] Merge common virtex header files
The header files for the ml403 and ml300 are virtually identical, merge
them into a single file.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30 11:02:04 +10:00
Stephen Rothwell 0e56efc7dc [POWERPC] Rename get_property to of_get_property
This is more consistent and gets us closer to the Sparc code.

We add a get_property define for compatibility during the change over.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:17 +10:00
Stefan Roese ab9367e38f [POWERPC] ppc: Add support for AMCC Taishan 440GX eval board
This patch adds support for the AMCC Taishan PPC440GX evaluation
board.

This is still an arch/ppc port. I'm aware that the move of
4xx to arch/powerpc is making good progress right now. So this
patch is mainly intended to make the Taishan support available
for the community right now.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:52 +11:00
Al Viro 4ec031166f [PATCH] kill eth_io_copy_and_sum()
On all targets that sucker boils down to memcpy_fromio(sbk->data, from, len).
The function name is highly misguiding (it _never_ does any checksums), the
last argument is just a noise and simply expanding the call to memcpy_fromio()
gives shorter and more readable source.  For a lot of reasons it has almost
no remaining users, so it's better to just outright kill it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 09:14:07 -08:00
David Gibson a2c70211fa [POWERPC] Compile fixes for arch/powerpc dcr code
The new dcr code does not currently compile when configured for native
DCR access on ARCH=powerpc.  This patch fixes the problems.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:23 +11:00
Vitaly Bordug f2a0bd3753 [POWERPC] 8xx: powerpc port of core CPM PIC
This covers common CPM access functions, CPM interrupt controller code,
micropatch and a few compatibility things to kee the same driver base
working with arch/ppc. This version is refined with all the comments
(mostly PIC-related) addressed.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Adrian Bunk c53653130f [POWERPC] Remove the broken Gemini support
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:13:58 +11:00
Paul Mackerras 973c1fabc7 Merge branch 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc 2006-12-11 16:31:42 +11:00
Kumar Gala 45d8e7aaf4 [POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set
On 85xx we don't build in dcr support because the core doesn't implement the
instructions.  This caused problems when building an 85xx kernel.  Additionally
made it so we only build __mtdcr/__mfdcr if we are CONFIG_PPC_DCR_NATIVE.

The 85xx build issue wasPointed out by Dai Haruki.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-10 23:15:47 -06:00
Benjamin Herrenschmidt 396a1a5832 [POWERPC] Fix mmap of PCI resource with hack for X
The powerpc version of pci_resource_to_user() and associated hooks
used by /proc/bus/pci and /sys/bus/pci mmap have been broken for some
time on machines that don't have a 1:1 mapping of devices (basically
on non-PowerMacs) and have PCI devices above 32 bits.

This attempts to fix it as well as possible.

The rule is supposed to be that pci_resource_to_user() always converts
the resources back into a BAR values since that's what the /proc
interface was supposed to deal with. However, for X to work on
platforms where PCI MMIO is not mapped 1:1, it became a habit of
platforms like powerpc to pass "fixed up" values there since X expects
to be able to use values from /proc/bus/pci/devices as offsets to mmap
of /dev/mem...

So we keep that contraption here, causing also /sys/*/resource to
expose fully absolute MMIO addresses instead of BAR values, which is
ugly, but should still work as long as those are only used to calculate
alignment within a page.

X is still broken when built 32 bits on machines where PCI MMIO can be
above 32-bit space unfortunately.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08 17:21:06 +11:00
Roland Dreier 1d4454e7ce [POWERPC] Define pci_unmap_addr() et al. when CONFIG_NOT_COHERENT_CACHE=y
The current PowerPC code makes pci_unmap_addr(), pci_unmap_addr_set(),
and friends trivial for all 32-bit kernels.  This is reasonable, since
for those kernels it is true that pci_unmap_single() does not need the
DMA address from the original DMA mapping -- in fact, it is a NOP.

However, I recently tried the tg3 driver on a PowerPC 440SPe machine,
which runs a 32-bit kernel and has non-cache-coherent PCI DMA.  I
found that the tg3 driver crashed in pci_dma_sync_single_for_cpu(),
since for non-coherent systems, that function must invalidate the
cache for the DMA address range requested, and therefore it does use
the address passed in.  tg3 uses a DMA address it stashes away with
pci_unmap_addr_set() and retrieves with pci_unmap_addr().  Of course,
since pci_unmap_addr() is defined to (0) right now, this doesn't work.

It seems to me that the tg3 driver is using pci_unmap_addr() in a
legitimate way -- I wouldn't want to have to teach all drivers that
they should use pci_unmap_addr() if they only need the address for
unmapping functions, but if they want the pci_dma_sync functions, then
they have to store the DMA address without the helper macros.
The right fix therefore seems to be in the definition of the macros in
<asm/pci.h> -- we should use the trivial versions only for 32-bit
kernels for coherent systems, and the real versions for both 64-bit
kernels and non-coherent systems.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08 17:10:18 +11:00
Peter Zijlstra a866374aec [PATCH] mm: pagefault_{disable,enable}()
Introduce pagefault_{disable,enable}() and use these where previously we did
manual preempt increments/decrements to make the pagefault handler do the
atomic thing.

Currently they still rely on the increased preempt count, but do not rely on
the disabled preemption, this might go away in the future.

(NOTE: the extra barrier() in pagefault_disable might fix some holes on
       machines which have too many registers for their own good)

[heiko.carstens@de.ibm.com: s390 fix]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Nick Piggin <npiggin@suse.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:21 -08:00
Mariusz Kozlowski 25a31e2df0 [POWERPC] ppc: m48t35 add missing bracket
Add missing bracket in definition for m48t35 RTC chip.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:42:04 +11:00
Benjamin Herrenschmidt 6ad4e70caf [POWERPC] Fix IDE build with ARCH=ppc
The recent IO accessor changes broke IDE on arch/ppc due to the IDE
stream IO macros using the new reads/writes{b,w,l} accessors that
are only defined for arch/powerpc. This adds them to arch/ppc.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:39:09 +11:00
Benjamin Herrenschmidt 4cb3cee03d [POWERPC] Allow hooking of PCI MMIO & PIO accessors on 64 bits
This patch reworks the way iSeries hooks on PCI IO operations (both MMIO
and PIO) and provides a generic way for other platforms to do so (we
have need to do that for various other platforms).

While reworking the IO ops, I ended up doing some spring cleaning in
io.h and eeh.h which I might want to split into 2 or 3 patches (among
others, eeh.h had a lot of useless stuff in it).

A side effect is that EEH for PIO should work now (it used to pass IO
ports down to the eeh address check functions which is bogus).

Also, new are MMIO "repeat" ops, which other archs like ARM already had,
and that we have too now: readsb, readsw, readsl, writesb, writesw,
writesl.

In the long run, I might also make EEH use the hooks instead
of wrapping at the toplevel, which would make things even cleaner and
relegate EEH completely in platforms/iseries, but we have to measure the
performance impact there (though it's really only on MMIO reads)

Since I also need to hook on ioremap, I shuffled the functions a bit
there. I introduced ioremap_flags() to use by drivers who want to pass
explicit flags to ioremap (and it can be hooked). The old __ioremap() is
still there as a low level and cannot be hooked, thus drivers who use it
should migrate unless they know they want the low level version.

The patch "arch provides generic iomap missing accessors" (should be
number 4 in this series) is a pre-requisite to provide full iomap
API support with this patch.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:38:52 +11:00
Benjamin Herrenschmidt 803d4573e6 [POWERPC] Add "parent" struct device for PCI host bridges
Add a "parent" struct device to our PCI host bridge data structure so that
PCI can be rooted off another device in sysfs.

Note that arch/ppc doesn't use it, only arch/powerpc, though it's available
for both 32 and 64 bits.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:38:47 +11:00
Paul Mackerras 79acbb3ff2 Merge branch 'linux-2.6' into for-linus 2006-12-04 15:59:07 +11:00
Benjamin Herrenschmidt c6dbaef22a Driver core: add dev_archdata to struct device
Add arch specific dev_archdata to struct device

Adds an arch specific struct dev_arch to struct device. This enables
architecture to add specific fields to every device in the system, like
DMA operation pointers, NUMA node ID, firmware specific data, etc...

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andi Kleen <ak@suse.de>
Acked-By: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:52:01 -08:00