Commit Graph

135 Commits

Author SHA1 Message Date
Sam Ravnborg 6840999b19 x86: simplify "make ARCH=x86" and fix kconfig all.config
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in
all.config.

For a fix the diffstat is nice:
 6 files changed, 3 insertions(+), 36 deletions(-)

The patch reverts these commits:
 - 0f855aa64b ("kconfig: add helper to set
   config symbol from environment variable")
 - 2a113281f5 ("kconfig: use $K64BIT to
   set 64BIT with all*config targets")

Roman Zippel pointed out that kconfig supported string compares so
the additional complexity introduced by the above two patches were
not needed.

With this patch we have following behaviour:

  # make {allno,allyes,allmod,rand}config [ARCH=...]
  option \ host arch      | 32bit         | 64bit
  =====================================================
  ./.                     | 32bit         | 64bit
  ARCH=x86                | 32bit         | 32bit
  ARCH=i386               | 32bit         | 32bit
  ARCH=x86_64             | 64bit         | 64bit

The general rule are that ARCH= and native architecture takes
precedence over the configuration.

So make ARCH=i386 [whatever] will always build a 32-bit kernel
no matter what the configuration says.  The configuration will
be updated to 32-bit if it was configured to 64-bit and the
other way around.

This behaviour is consistent with previous behaviour so no
suprises here.

make ARCH=x86 will per default result in a 32-bit kernel but as
the only ARCH= value x86 allow the user to select between 32-bit
and 64-bit using menuconfig.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-17 08:35:43 -08:00
Sam Ravnborg daa93fab82 x86: enable "make ARCH=x86"
After unification of the Kconfig files and
introducing K64BIT support in kconfig
it required only trivial changes to enable
"make ARCH=x86".

With this patch you can build for x86_64 in several ways:
1) make ARCH=x86_64
2) make ARCH=x86 K64BIT=y
3) make ARCH=x86 menuconfig
   => select 64-bit

Likewise for i386 with the addition that
i386 is default is you say ARCH=x86.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12 21:02:20 +01:00
Sam Ravnborg 2a113281f5 kconfig: use $K64BIT to set 64BIT with all*config targets
The variable K64BIT can now be used to select the
value of CONFIG_64BIT.

This is for example useful for powerpc to generate
allmodconfig for both bit sizes - like this:
make ARCH=powerpc K64BIT=y
make ARCH=powerpc K64BIT=n

To use this the Kconfig file must use "64BIT" as the
config value to select between 32 and 64 bit.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-12 21:02:20 +01:00
Sam Ravnborg 0f855aa64b kconfig: add helper to set config symbol from environment variable
Add conf_set_env_sym() that can set an already defined symbol
based on the value of an environment variable.

Unknown symbols are silently ignored.
A warning is printed if the value of the environment variable
is unexpected.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-12 21:02:20 +01:00
Sam Ravnborg 9c900a9c9d kconfig: factor out code in confdata.c
This patch introduce no functional changes.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-12 21:02:19 +01:00
Sam Ravnborg 47572387d5 x86: move i386 and x86_64 Kconfig files to x86 directory
After a small change in kconfig Makefile we could
move all x86 Kconfig files to x86 directory.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25 22:37:02 +02:00
Sam Ravnborg e703f75d62 kconfig: small code refactoring in kconfig Makefile
Do not hardcode the arch/$(ARCH)/Kconfig name all over

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25 22:35:18 +02:00
Sam Ravnborg 2266cfd50d x86: move defconfig files for i386 and x86_64 to x86
With some small changes to kconfig makefile we can now
locate the defconfig files for i386 and x86_64 in
the configs/ subdirectory under x86.
make ARCH=i386 defconfig and make defconfig
works as expected also after this change.
But arch maintainers shall now update a defconfig file in
the configs/ directory.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25 22:27:41 +02:00
Randy Dunlap a54bb701c2 kconfig: set title bar in xconfig
Put kernel version info on title bar in xconfig (qconf) instead of
defaulting to "qconf".

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-20 20:16:50 +02:00
Linus Torvalds e8b8c97773 Revert "kconfig: tristate choices with mixed tristate and boolean values"
This reverts commit a5bf3d891a.

David Brownell notes that this causes a regression visible in the
drivers/usb/gadget Kconfig file:

  "That Kconfig hasn't changed (other than adding new drivers), and it's
   worked that way for several years now ...  so the issue seems to be
   changes in menuconfig/kconfig/etc semantics.

   The issue is that when USB_GADGET=m, it's no longer possible to
   configure peripheral controller drivers as modules ...  the
   controller drivers can now only be configured for static linkage.

   It should be making a choice of one of the controller drivers which
   could work on the target system, and allow that driver to be linked
   either as a module (ok iff USB_GADGET=m) or statically."

Reverting this commit resolves the problem, and also fixes a second
problem that David noticed: various dependent options couldn't be enabled.

Tested-and-reported-by: David Brownell <david-b@pacbell.net>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jan Beulich <jbeulich@novell.com>,
Cc: Andrew Morton <akpm@linux-foundation.org>,
Cc: Sam Ravnborg <sam@ravnborg.org>,
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 21:25:45 -07:00
Rob Landley e9e40e143c kconfig: comment typo in scripts/kconfig/Makefile.
Typo in comment in scripts/kconfig/Makefile.

Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-18 14:31:50 +02:00
Matej Laitl b5d609dbfa kconfig/menuconfig: distinguish between selected-by-another options and comments
menuconfig currently represents options implied by another option ('select'
directive in Kconfig) by prefixing them with '---'.  Unfortunately the same
notation is used for comments.  If the implied option is module capable,
user can still switch between Y and M, all without any feedback until she
visits option's help.  (try saying M to MAC80211 and then toggling
CFG80211)

This patch changes notation of selected-by-another items by introducing 2
new representations for implied options: {*} or {M} for options selected by
another modularized one, thus builtin or module capable, -*- or -M- for
options that cannot be at the moment changed by user.

The idea is to represent actual capability of the option by braces (dashes)
around and to always report actual state by * or M inside.

Signed-off-by: Matej Laitl <strohel@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:33 +02:00
Jan Beulich a5bf3d891a kconfig: tristate choices with mixed tristate and boolean values
Change kconfig behavior so that mixing bool and tristate config settings in
a choice is possible and has the desired effect of offering just the
tristate options individually if the choice gets set to M, and a normal
boolean selection if the choice gets set to Y.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:33 +02:00
Sam Ravnborg 14f31562db kbuild: update _shipped files for kconfig syntax cleanup
Update _shipped files so regular user does not
need to have bison/flex/gperf installed.
Code changes were contained in previous commit.

Used following program versions (on fedora):
bison (GNU Bison) 2.3
flex 2.5.33
GNU gperf 3.0.2

Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:32 +02:00
Adrian Bunk 247537b9a2 kconfig: syntax cleanup - drop support for "depends/requires/def_boolean"
Remove the following redundant and never or rarely used kconfig syntax:

- "def_boolean" (same as "def_bool")
- "requires" (same as "depends on")
- "depends" (same as "depends on")

This patch contains the code changes and Kconfig updates.
The shipped files are in next patch to let actual codechange stand out.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:32 +02:00
Sam Ravnborg a67cb1319f kconfig: fix segv fault in menuconfig
With specific configurations requesting help for certain
menu lines caused menuconfig to crash.
This was tracked down to a null pointer bug.
Thanks to "Miles Lane" <miles.lane@gmail.com> for inital reporting
and to Gabriel C <nix.or.die@googlemail.com> for the backtrace
that helped me locating the bug.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:32 +02:00
Sam Ravnborg 48874077dd kconfig: make comments stand out in menuconfig
Matěj Laitl <strohel@gmail.com> noticed that there was no way
to distingush between comments and un-selectable menu lines.
This patch marks comments with *** comment ***

Cc: Matěj Laitl <strohel@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:32 +02:00
Sam Ravnborg aa1e5ef5c1 kbuild: check if we can link gettext not just compile
cygwin provides the header file but the lib file needs
to be added manually. A generic fix is to check if
we can compile and link a program that uses gettext()
and if it fails fall back to NO_NLS.

International users of cygwin may have to specify
HOST_LOADLIBES := "-lintl" on the make command line.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:13:50 +02:00
Roman Zippel f82f3f9422 kconfig: oldconfig shall not set symbols if it does not need to
Avoid setting the value if the symbol doesn't need to be changed or can't
be changed. Later choices may change the dependencies and thus the
possible input range.

make oldconfig from a 2.6.22 .config with CONFIG_HOTPLUG_CPU not set
was in some configurations setting CONFIG_HOTPLUG_CPU=y without asking,
even when there was no actual requirement for CONFIG_HOTPLUG_CPU.
This was triggered by SUSPEND_SMP that does a select HOTPLUG_CPU.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Tested-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-09-01 08:24:09 +02:00
Sam Ravnborg 1edf1c00ac kconfig: remove unused members from struct symbol
dep and dep2 in struct symbol was unused - remove them.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2007-07-25 21:14:30 +02:00
Sam Ravnborg 03d2912273 kconfig: attach help text to menus
Roman Zippel wrote:
> A simple example would be
> help texts, right now they are per symbol, but they should really be per
> menu, so archs can provide different help texts for something.

This patch does this and at the same time introduce a few API
funtions used to access the help text.

The relevant api functions are introduced in the various frontends.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2007-07-25 21:14:26 +02:00
Roman Zippel d8982ba1f2 kconfig: reset generated values only if Kconfig and .config agree.
Normally generated values (Kconfig entries without a prompt) are cleared as
they are regenerated anyway and so they appear as new should they become
visible and defaults work as expected (once a value is set defaults aren't
used anymore).

The detection whether a value is generated or not is only based on its
visibility status, which can quickly change for a lot of symbols by just
removing a single line from .config or adding a dependency to Kconfig as you
noticed.

The patch now suppresses this logic when .config and Kconfig aren't in sync
and .config needs to be updated, so that you can remove now a random value
from .config and oldconfig won't reask for many other values.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-07-17 14:24:55 +02:00
Bernhard Walle 0584f9f9cb kconfig: strip 'CONFIG_' automatically in kernel configuration search
Modify the ncurses configuration tool ('make menuconfig') in a way that the
user can enter the search string (/) both with or without the leading
'CONFIG_'.

This simplifies using copy & paste from .config files because you can
select the whole word.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-07-17 14:24:55 +02:00
Sam Ravnborg b70e325cfe kconfig: fix update-po-config
Massimo Maiurana <maiurana@gmail.com> reported that
update-po-config was broken:
1) spelling errors in Makefile so arch/um failed
2) UTF-8 was not supported

The following patch address the above problems.
kxgettext now append the output to the .pot file
generated by xgettext - so we have a header.
In all places UFT-8 is specifed so we now flawlessly
support UTF-8.
The Kconfig files had an empty string in a few cases -
these are now supressed in kxgettext.

With this the translators can now pick up where they left
and get it all translated.
There are ~11000 strings to be translated...

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc:  Massimo Maiurana <maiurana@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-07-16 21:15:53 +02:00
Mike Frysinger e99c343f16 kconfig: use POSIX equality test in check-lxdialog.sh
The "==" operator is not in POSIX, so use -eq instead.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-07-16 21:15:51 +02:00
Mike Frysinger 03c9587d75 kconfig: search harder for curses library in check-lxdialog.sh
The check-lxdialog.sh script searches for "libFOO.so" which fails on OS X, due
to their special naming of libraries like "libfoo.dylib".  This patch turns
the curses lib search into extensible loops and adds dylib as a valid
extension.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-19 09:11:15 +02:00
Marcin Garski 11de39e2fb kconfig: fix mconf segmentation fault
I have found small bug in mconf, when you run it without any argument it
will sigsegv.

Without patch:
$ scripts/kconfig/mconf
Segmentation fault

With patch:
$ scripts/kconfig/mconf
can't find file (null)

Signed-off-by: Marcin Garski <mgarski@post.pl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-06 09:27:15 +02:00
Sam Ravnborg 5447d34b08 kconfig: error out if recursive dependencies are found
Sample:
config FOO
	bool "This is foo"
	depends on BAR

config BAR
	bool "This is bar"
	depends on FOO

This will result in following error message:
error: found recursive dependency: FOO -> BAR -> FOO

And will then exit with exit code equal 1 so make will stop.
Inspired by patch from: Adrian Bunk <bunk@stusta.de>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
2007-05-06 09:20:10 +02:00
Robert P. J. Day 1e093ecd4a kconfig: correct minor typo in Kconfig warning message.
Correct a minor spelling mistake in a Kconfig warning message.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:12 +02:00
Randy Dunlap 7ac1c14525 kbuild: be more explicit on missing .config file
Somewhat in reponse to kernel bugzilla #8197, be more explicit about
why 'make all' fails when there is no .config file.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:11 +02:00
Sam Ravnborg 9ae57004ca kconfig: refer to qt3 if we cannot find qt libraries
We do not support qt4 (yet) so the simple fix was to warn
that qt3 are missing.
The better fix would have been to implment qt4 support
but that has failed so far.

This solves http://bugzilla.kernel.org/show_bug.cgi?id=8277

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:10 +02:00
Sam Ravnborg 145c90475f kbuild: remove kconfig binaries during make mrproper
Nigel Cunningham <nigel@nigel.suspend2.net> noticed
that 'make mrproper' did not remove mconf.
Fixed so we now remove all relevant binaries.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc:  Nigel Cunningham <nigel@nigel.suspend2.net>
2007-05-02 20:58:10 +02:00
Sam Ravnborg d802b50f0d kconfig/menuconfig: do not hardcode '.config'
Export and use the function conf_get_configname()
to retreive the default configuration filename.

Suggested by: Roman Zippel <zippel@linux-m68k.org>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:09 +02:00
Sam Ravnborg 95e30f9593 menuconfig: remember alternate config filename
When loading an alternate configuration use that file as
current configuration filename.
Make the filename visible in the dialog.
Default continue to be .config.

Inspired by patch from: Cyrill Gorcunov <gorcunov@gmail.com>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc:  Cyrill Gorcunov <gorcunov@gmail.com>
2007-05-02 20:58:09 +02:00
Marco Costalba 63431e7569 kconfig/xconfig: sync main view with search dialog current menu
When changing current menu in search dialog update also main view

Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:08 +02:00
Mike Frysinger f88d205501 menuconfig: dont use obsolete index() function in lxdialog
The index() function is obsolete, use strchr() instead.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02 20:58:08 +02:00
Cyrill V. Gorcunov ed8b4d4d7a [PATCH] qconf: hide empty list items
This patch fixes showing empty config list items if "Option/Show All
Options" is turned on.  For example empty items appears on list of 'Block
Layer' menu.

Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
Cyrill V. Gorcunov f253f00003 [PATCH] qconf: Back button behaviour normalization
Do "Back" button behaviour normalization so it is enabled starting from
second-level menu only.

Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
Cyrill V. Gorcunov 786fb18d01 [PATCH] qconf: fix showing help info on failed search
qconf does not clear help text in search window if previous search has been
failed.

Signed-off-by: Cyrill V. Gorcunov <gorcunov@mail.ru>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:52 -08:00
Shlomi Fish 66e7c7230f [PATCH] qconf: relocate Search Command
Relocate the qconf search command to the "Edit"->"Find" menu option.

This is per the discussion on my qconf search dialog patch.

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:51 -08:00
Karsten Wiese 49e5646d65 [PATCH] qconf: immediately update integer and string values in xconfig display
In xconfig's display integer and string values are also shown as part of
the config item's descriptive text.

This patch updates the descriptive text, when the corresponding value has
been changed.  Fix for http://bugzilla.kernel.org/show_bug.cgi?id=7744

Take2 uses updateList() so config values dependending on the changed value
see the change.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:51 -08:00
Roman Zippel 6fa1da8ea9 [PATCH] qconf: (re)fix SIGSEGV on empty menu items
Back out the recent fix for this bug, fix it by correctly initialising
ConfigInfoView.sym.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: "Cyrill V. Gorcunov" <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-11 18:18:20 -08:00
Cyrill V. Gorcunov 73b8ed29ab [PATCH] qconf: fix SIGSEGV on empty menu items
qconf may cause SIGSEGV by trying to show debug information on empty menu
items

Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05 23:55:29 -08:00
Karsten Wiese 0a0c502c94 [PATCH] kconfig: set gconf's save-widget's sensitivity according to .config's changed state
Clean up a little.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:48 -08:00
Karsten Wiese 3b354c557c [PATCH] kconfig: add "void conf_set_changed_callback(void (*fn)(void))", use it in qconf.cc
Added function sets "void (*conf_changed_callback)(void)".  Call it, if
.config's changed state changes.  Use above in qconf.cc to set gui's
save-widget's sensitvity.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:48 -08:00
Karsten Wiese bfc10001b1 [PATCH] kconfig: make sym_change_count static, let it be altered by 2 functions only
Those two functions are
	void sym_set_change_count(int count)
and
	void sym_add_change_count(int count)

All write accesses to sym_change_count are replaced by calls to above
functions.

Variable and changer-functions are moved to confdata.c.  IMO thats ok, as
sym_change_count is an attribute of the .config's change state.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:48 -08:00
Karsten Wiese b321429325 [PATCH] kconfig: new function "bool conf_get_changed(void)"
Run "make xconfig" on a freshly untarred kernel-tree.  Look at the floppy disk
icon of the qt application, that has just started: Its in a normal, active
state.

Mouse click on it: .config is being saved.

This patch series changes things so taht
after the mouse click on the floppy disk icon, the icon is greyed out.
If you mouse click on it now, nothing happens.

If you change some CONFIG_*, the floppy disk icon returns to "active state",
that is, if you mouse click it now, .config is written.

This patch:

Returns sym_change_count to reflect the .config's change state.
All read only accesses of
	sym_change_count
are replaced by calls to
	conf_get_changed()
.
mconfig.c is manipulated to ask for saving only when
conf_get_changed() returned true.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:48 -08:00
akpm@osdl.org 44ddc4f567 [PATCH] qconf: support old QT
Might make qconf compilable with qt-3.1 as well as qt-3.3

Cc: greg chesson <xtp@google.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:37 -08:00
Roman Zippel c154348f00 [PATCH] fix menuconfig colours with TERM=vt100
On Mon, 13 Nov 2006, Phil Oester wrote:
> In commit 350b5b7638, the default menuconfig
> color scheme was changed to bluetitle.  This breaks the highlighting
> of the selected item for me with TERM=vt100.  The only way I can see
> which item is selected is via:
>
>     make MENUCONFIG_COLOR=mono menuconfig
>
> Which restores the pre-2.6.19 white on black highlighting.

Fix.

Cc: Phil Oester <kernel@linuxace.com>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-25 13:28:34 -08:00
Roman Zippel f12aa70452 [PATCH] qconf: fix uninitialsied member
Fixes a segfault reported by Randy.

Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-25 13:28:34 -08:00