Commit Graph

263 Commits

Author SHA1 Message Date
Benjamin Herrenschmidt 5a1eb5c445 powerpc: Cleanup Kconfig selection of hugetlbfs support
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-30 15:03:54 +11:00
Linus Torvalds 0d43f5123d Merge branch 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix hugetlbfs dependencies for SH-3 && MMU configurations.
  sh: Document uImage.bin target in archhelp.
  sh: add uImage.bin target
  sh: rsk7203 CONFIG_MTD=n fix
  sh: Check for return_to_handler when unwinding the stack
  sh: Build fix: define more __movmem* symbols
  sh: __irq_entry annotate do_IRQ().

Fix up sh/powerpc conflicts in fs/Kconfig
2009-10-29 09:07:15 -07:00
Kumar Gala 0cd9ad73b8 powerpc: Limit hugetlbfs support to PPC64 Book-3S machines
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-27 16:42:41 +11:00
Paul Mundt ffb4a73d89 sh: Fix hugetlbfs dependencies for SH-3 && MMU configurations.
The hugetlb dependencies presently depend on SUPERH && MMU while the
hugetlb page size definitions depend on CPU_SH4 or CPU_SH5. This
unfortunately allows SH-3 + MMU configurations to enable hugetlbfs
without a corresponding HPAGE_SHIFT definition, resulting in the build
blowing up.

As SH-3 doesn't support variable page sizes, we tighten up the
dependenies a bit to prevent hugetlbfs from being enabled. These days
we also have a shiny new SYS_SUPPORTS_HUGETLBFS, so switch to using
that rather than adding to the list of corner cases in fs/Kconfig.

Reported-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27 07:22:37 +09:00
Hugh Dickins 3f96b79ad9 tmpfs: depend on shmem
CONFIG_SHMEM off gives you (ramfs masquerading as) tmpfs, even when
CONFIG_TMPFS is off: that's a little anomalous, and I'd intended to make
more sense of it by removing CONFIG_TMPFS altogether, always enabling its
code when CONFIG_SHMEM; but so many defconfigs have CONFIG_SHMEM on
CONFIG_TMPFS off that we'd better leave that as is.

But there is no point in asking for CONFIG_TMPFS if CONFIG_SHMEM is off:
make TMPFS depend on SHMEM, which also prevents TMPFS_POSIX_ACL
shmem_acl.o being pointlessly built into the kernel when SHMEM is off.

And a selfish change, to prevent the world from being rebuilt when I
switch between CONFIG_SHMEM on and off: the only CONFIG_SHMEM in the
header files is mm.h shmem_lock() - give that a shmem.c stub instead.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:41 -07:00
Ryusuke Konishi 41f4db0f48 fs/Kconfig: move nilfs2 outside misc filesystems
Some people asked me questions like the following:

On Wed, 15 Jul 2009 13:11:21 +0200, Leon Woestenberg wrote:
> just wondering, any reasons why NILFS2 is one of the miscellaneous
> filesystems and, for example, btrfs, is not in Kconfig?

Actually, nilfs is NOT a filesystem came from other operating systems,
but a filesystem created purely for Linux.  Nor is it a flash
filesystem but that for generic block devices.

So, this moves nilfs outside the misc category as I responded in LKML
"Re: Why does NILFS2 hide under Miscellaneous filesystems?"
(Message-Id: <20090716.002526.93465395.ryusuke@osrg.net>).

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:16 +09:00
Ryusuke Konishi 4fed598a49 fs/Kconfig: move nilfs2 out
fs/Kconfig file was split into individual fs/*/Kconfig files before
nilfs was merged.  I've found the current config entry of nilfs is
tainting the work.  Sorry, I didn't notice.  This fixes the violation.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
2009-07-14 12:34:17 +09:00
Linus Torvalds 7e0338c0de Merge branch 'for-2.6.31' of git://fieldses.org/git/linux-nfsd
* 'for-2.6.31' of git://fieldses.org/git/linux-nfsd: (60 commits)
  SUNRPC: Fix the TCP server's send buffer accounting
  nfsd41: Backchannel: minorversion support for the back channel
  nfsd41: Backchannel: cleanup nfs4.0 callback encode routines
  nfsd41: Remove ip address collision detection case
  nfsd: optimise the starting of zero threads when none are running.
  nfsd: don't take nfsd_mutex twice when setting number of threads.
  nfsd41: sanity check client drc maxreqs
  nfsd41: move channel attributes from nfsd4_session to a nfsd4_channel_attr struct
  NFS: kill off complicated macro 'PROC'
  sunrpc: potential memory leak in function rdma_read_xdr
  nfsd: minor nfsd_vfs_write cleanup
  nfsd: Pull write-gathering code out of nfsd_vfs_write
  nfsd: track last inode only in use_wgather case
  sunrpc: align cache_clean work's timer
  nfsd: Use write gathering only with NFSv2
  NFSv4: kill off complicated macro 'PROC'
  NFSv4: do exact check about attribute specified
  knfsd: remove unreported filehandle stats counters
  knfsd: fix reply cache memory corruption
  knfsd: reply cache cleanups
  ...
2009-06-22 12:55:50 -07:00
David Daney 852969b2d2 Hugetlbfs: Enable hugetlbfs for more systems in Kconfig.
As part of adding hugetlbfs support for MIPS, I am adding a new
kconfig variable 'SYS_SUPPORTS_HUGETLBFS'.  Since some mips cpu
varients don't yet support it, we can enable selection of HUGETLBFS on
a system by system basis from the arch/mips/Kconfig.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
CC: William Irwin <wli@holomorphy.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17 11:06:31 +01:00
Tomas Szepe 69050eee8e CONFIG_FILE_LOCKING should not depend on CONFIG_BLOCK
CONFIG_FILE_LOCKING should not depend on CONFIG_BLOCK.

This makes it possible to run complete systems out of a CONFIG_BLOCK=n
initramfs on current kernels again (this last worked on 2.6.27.*).

Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:52 -07:00
Tejun Heo 151060ac13 CUSE: implement CUSE - Character device in Userspace
CUSE enables implementing character devices in userspace.  With recent
additions of ioctl and poll support, FUSE already has most of what's
necessary to implement character devices.  All CUSE has to do is
bonding all those components - FUSE, chardev and the driver model -
nicely.

When client opens /dev/cuse, kernel starts conversation with
CUSE_INIT.  The client tells CUSE which device it wants to create.  As
the previous patch made fuse_file usable without associated
fuse_inode, CUSE doesn't create super block or inodes.  It attaches
fuse_file to cdev file->private_data during open and set ff->fi to
NULL.  The rest of the operation is almost identical to FUSE direct IO
case.

Each CUSE device has a corresponding directory /sys/class/cuse/DEVNAME
(which is symlink to /sys/devices/virtual/class/DEVNAME if
SYSFS_DEPRECATED is turned off) which hosts "waiting" and "abort"
among other things.  Those two files have the same meaning as the FUSE
control files.

The only notable lacking feature compared to in-kernel implementation
is mmap support.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-06-09 11:24:11 +02:00
Randy Dunlap dd4dc82d4c lockd: fix FILE_LOCKING=n build error
lockd/svclock.c is missing a header file <linux/fs.h>.

<linux/fs.h> is missing a definition of locks_release_private()
for the config case of FILE_LOCKING=n, causing a build error:

fs/lockd/svclock.c:330: error: implicit declaration of function 'locks_release_private'

lockd without FILE_LOCKING doesn't make sense, so make LOCKD and LOCKD_V4
depend on FILE_LOCKING, and make NFS depend on FILE_LOCKING.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-05-13 15:59:10 -04:00
Ryusuke Konishi 0c4fb87764 nilfs2: update makefile and Kconfig
This adds a Makefile for the nilfs2 file system, and updates the
makefile and Kconfig file in the file system directory.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:16 -07:00
Linus Torvalds 3cc50ac0db Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-fscache
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-fscache: (41 commits)
  NFS: Add mount options to enable local caching on NFS
  NFS: Display local caching state
  NFS: Store pages from an NFS inode into a local cache
  NFS: Read pages from FS-Cache into an NFS inode
  NFS: nfs_readpage_async() needs to be accessible as a fallback for local caching
  NFS: Add read context retention for FS-Cache to call back with
  NFS: FS-Cache page management
  NFS: Add some new I/O counters for FS-Cache doing things for NFS
  NFS: Invalidate FsCache page flags when cache removed
  NFS: Use local disk inode cache
  NFS: Define and create inode-level cache objects
  NFS: Define and create superblock-level objects
  NFS: Define and create server-level objects
  NFS: Register NFS for caching and retrieve the top-level index
  NFS: Permit local filesystem caching to be enabled for NFS
  NFS: Add FS-Cache option bit and debug bit
  NFS: Add comment banners to some NFS functions
  FS-Cache: Make kAFS use FS-Cache
  CacheFiles: A cache that backs onto a mounted filesystem
  CacheFiles: Export things for CacheFiles
  ...
2009-04-03 10:07:43 -07:00
David Howells 9ae326a690 CacheFiles: A cache that backs onto a mounted filesystem
Add an FS-Cache cache-backend that permits a mounted filesystem to be used as a
backing store for the cache.

CacheFiles uses a userspace daemon to do some of the cache management - such as
reaping stale nodes and culling.  This is called cachefilesd and lives in
/sbin.  The source for the daemon can be downloaded from:

	http://people.redhat.com/~dhowells/cachefs/cachefilesd.c

And an example configuration from:

	http://people.redhat.com/~dhowells/cachefs/cachefilesd.conf

The filesystem and data integrity of the cache are only as good as those of the
filesystem providing the backing services.  Note that CacheFiles does not
attempt to journal anything since the journalling interfaces of the various
filesystems are very specific in nature.

CacheFiles creates a misc character device - "/dev/cachefiles" - that is used
to communication with the daemon.  Only one thing may have this open at once,
and whilst it is open, a cache is at least partially in existence.  The daemon
opens this and sends commands down it to control the cache.

CacheFiles is currently limited to a single cache.

CacheFiles attempts to maintain at least a certain percentage of free space on
the filesystem, shrinking the cache by culling the objects it contains to make
space if necessary - see the "Cache Culling" section.  This means it can be
placed on the same medium as a live set of data, and will expand to make use of
spare space and automatically contract when the set of data requires more
space.

============
REQUIREMENTS
============

The use of CacheFiles and its daemon requires the following features to be
available in the system and in the cache filesystem:

	- dnotify.

	- extended attributes (xattrs).

	- openat() and friends.

	- bmap() support on files in the filesystem (FIBMAP ioctl).

	- The use of bmap() to detect a partial page at the end of the file.

It is strongly recommended that the "dir_index" option is enabled on Ext3
filesystems being used as a cache.

=============
CONFIGURATION
=============

The cache is configured by a script in /etc/cachefilesd.conf.  These commands
set up cache ready for use.  The following script commands are available:

 (*) brun <N>%
 (*) bcull <N>%
 (*) bstop <N>%
 (*) frun <N>%
 (*) fcull <N>%
 (*) fstop <N>%

	Configure the culling limits.  Optional.  See the section on culling
	The defaults are 7% (run), 5% (cull) and 1% (stop) respectively.

	The commands beginning with a 'b' are file space (block) limits, those
	beginning with an 'f' are file count limits.

 (*) dir <path>

	Specify the directory containing the root of the cache.  Mandatory.

 (*) tag <name>

	Specify a tag to FS-Cache to use in distinguishing multiple caches.
	Optional.  The default is "CacheFiles".

 (*) debug <mask>

	Specify a numeric bitmask to control debugging in the kernel module.
	Optional.  The default is zero (all off).  The following values can be
	OR'd into the mask to collect various information:

		1	Turn on trace of function entry (_enter() macros)
		2	Turn on trace of function exit (_leave() macros)
		4	Turn on trace of internal debug points (_debug())

	This mask can also be set through sysfs, eg:

		echo 5 >/sys/modules/cachefiles/parameters/debug

==================
STARTING THE CACHE
==================

The cache is started by running the daemon.  The daemon opens the cache device,
configures the cache and tells it to begin caching.  At that point the cache
binds to fscache and the cache becomes live.

The daemon is run as follows:

	/sbin/cachefilesd [-d]* [-s] [-n] [-f <configfile>]

The flags are:

 (*) -d

	Increase the debugging level.  This can be specified multiple times and
	is cumulative with itself.

 (*) -s

	Send messages to stderr instead of syslog.

 (*) -n

	Don't daemonise and go into background.

 (*) -f <configfile>

	Use an alternative configuration file rather than the default one.

===============
THINGS TO AVOID
===============

Do not mount other things within the cache as this will cause problems.  The
kernel module contains its own very cut-down path walking facility that ignores
mountpoints, but the daemon can't avoid them.

Do not create, rename or unlink files and directories in the cache whilst the
cache is active, as this may cause the state to become uncertain.

Renaming files in the cache might make objects appear to be other objects (the
filename is part of the lookup key).

Do not change or remove the extended attributes attached to cache files by the
cache as this will cause the cache state management to get confused.

Do not create files or directories in the cache, lest the cache get confused or
serve incorrect data.

Do not chmod files in the cache.  The module creates things with minimal
permissions to prevent random users being able to access them directly.

=============
CACHE CULLING
=============

The cache may need culling occasionally to make space.  This involves
discarding objects from the cache that have been used less recently than
anything else.  Culling is based on the access time of data objects.  Empty
directories are culled if not in use.

Cache culling is done on the basis of the percentage of blocks and the
percentage of files available in the underlying filesystem.  There are six
"limits":

 (*) brun
 (*) frun

     If the amount of free space and the number of available files in the cache
     rises above both these limits, then culling is turned off.

 (*) bcull
 (*) fcull

     If the amount of available space or the number of available files in the
     cache falls below either of these limits, then culling is started.

 (*) bstop
 (*) fstop

     If the amount of available space or the number of available files in the
     cache falls below either of these limits, then no further allocation of
     disk space or files is permitted until culling has raised things above
     these limits again.

These must be configured thusly:

	0 <= bstop < bcull < brun < 100
	0 <= fstop < fcull < frun < 100

Note that these are percentages of available space and available files, and do
_not_ appear as 100 minus the percentage displayed by the "df" program.

The userspace daemon scans the cache to build up a table of cullable objects.
These are then culled in least recently used order.  A new scan of the cache is
started as soon as space is made in the table.  Objects will be skipped if
their atimes have changed or if the kernel module says it is still using them.

===============
CACHE STRUCTURE
===============

The CacheFiles module will create two directories in the directory it was
given:

 (*) cache/

 (*) graveyard/

The active cache objects all reside in the first directory.  The CacheFiles
kernel module moves any retired or culled objects that it can't simply unlink
to the graveyard from which the daemon will actually delete them.

The daemon uses dnotify to monitor the graveyard directory, and will delete
anything that appears therein.

The module represents index objects as directories with the filename "I..." or
"J...".  Note that the "cache/" directory is itself a special index.

Data objects are represented as files if they have no children, or directories
if they do.  Their filenames all begin "D..." or "E...".  If represented as a
directory, data objects will have a file in the directory called "data" that
actually holds the data.

Special objects are similar to data objects, except their filenames begin
"S..." or "T...".

If an object has children, then it will be represented as a directory.
Immediately in the representative directory are a collection of directories
named for hash values of the child object keys with an '@' prepended.  Into
this directory, if possible, will be placed the representations of the child
objects:

	INDEX     INDEX      INDEX                             DATA FILES
	========= ========== ================================= ================
	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400
	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...DB1ry
	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...N22ry
	cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...FP1ry

If the key is so long that it exceeds NAME_MAX with the decorations added on to
it, then it will be cut into pieces, the first few of which will be used to
make a nest of directories, and the last one of which will be the objects
inside the last directory.  The names of the intermediate directories will have
'+' prepended:

	J1223/@23/+xy...z/+kl...m/Epqr

Note that keys are raw data, and not only may they exceed NAME_MAX in size,
they may also contain things like '/' and NUL characters, and so they may not
be suitable for turning directly into a filename.

To handle this, CacheFiles will use a suitably printable filename directly and
"base-64" encode ones that aren't directly suitable.  The two versions of
object filenames indicate the encoding:

	OBJECT TYPE	PRINTABLE	ENCODED
	===============	===============	===============
	Index		"I..."		"J..."
	Data		"D..."		"E..."
	Special		"S..."		"T..."

Intermediate directories are always "@" or "+" as appropriate.

Each object in the cache has an extended attribute label that holds the object
type ID (required to distinguish special objects) and the auxiliary data from
the netfs.  The latter is used to detect stale objects in the cache and update
or retire them.

Note that CacheFiles will erase from the cache any file it doesn't recognise or
any file of an incorrect type (such as a FIFO file or a device file).

==========================
SECURITY MODEL AND SELINUX
==========================

CacheFiles is implemented to deal properly with the LSM security features of
the Linux kernel and the SELinux facility.

One of the problems that CacheFiles faces is that it is generally acting on
behalf of a process, and running in that process's context, and that includes a
security context that is not appropriate for accessing the cache - either
because the files in the cache are inaccessible to that process, or because if
the process creates a file in the cache, that file may be inaccessible to other
processes.

The way CacheFiles works is to temporarily change the security context (fsuid,
fsgid and actor security label) that the process acts as - without changing the
security context of the process when it the target of an operation performed by
some other process (so signalling and suchlike still work correctly).

When the CacheFiles module is asked to bind to its cache, it:

 (1) Finds the security label attached to the root cache directory and uses
     that as the security label with which it will create files.  By default,
     this is:

	cachefiles_var_t

 (2) Finds the security label of the process which issued the bind request
     (presumed to be the cachefilesd daemon), which by default will be:

	cachefilesd_t

     and asks LSM to supply a security ID as which it should act given the
     daemon's label.  By default, this will be:

	cachefiles_kernel_t

     SELinux transitions the daemon's security ID to the module's security ID
     based on a rule of this form in the policy.

	type_transition <daemon's-ID> kernel_t : process <module's-ID>;

     For instance:

	type_transition cachefilesd_t kernel_t : process cachefiles_kernel_t;

The module's security ID gives it permission to create, move and remove files
and directories in the cache, to find and access directories and files in the
cache, to set and access extended attributes on cache objects, and to read and
write files in the cache.

The daemon's security ID gives it only a very restricted set of permissions: it
may scan directories, stat files and erase files and directories.  It may
not read or write files in the cache, and so it is precluded from accessing the
data cached therein; nor is it permitted to create new files in the cache.

There are policy source files available in:

	http://people.redhat.com/~dhowells/fscache/cachefilesd-0.8.tar.bz2

and later versions.  In that tarball, see the files:

	cachefilesd.te
	cachefilesd.fc
	cachefilesd.if

They are built and installed directly by the RPM.

If a non-RPM based system is being used, then copy the above files to their own
directory and run:

	make -f /usr/share/selinux/devel/Makefile
	semodule -i cachefilesd.pp

You will need checkpolicy and selinux-policy-devel installed prior to the
build.

By default, the cache is located in /var/fscache, but if it is desirable that
it should be elsewhere, than either the above policy files must be altered, or
an auxiliary policy must be installed to label the alternate location of the
cache.

For instructions on how to add an auxiliary policy to enable the cache to be
located elsewhere when SELinux is in enforcing mode, please see:

	/usr/share/doc/cachefilesd-*/move-cache.txt

When the cachefilesd rpm is installed; alternatively, the document can be found
in the sources.

==================
A NOTE ON SECURITY
==================

CacheFiles makes use of the split security in the task_struct.  It allocates
its own task_security structure, and redirects current->act_as to point to it
when it acts on behalf of another process, in that process's context.

The reason it does this is that it calls vfs_mkdir() and suchlike rather than
bypassing security and calling inode ops directly.  Therefore the VFS and LSM
may deny the CacheFiles access to the cache data because under some
circumstances the caching code is running in the security context of whatever
process issued the original syscall on the netfs.

Furthermore, should CacheFiles create a file or directory, the security
parameters with that object is created (UID, GID, security label) would be
derived from that process that issued the system call, thus potentially
preventing other processes from accessing the cache - including CacheFiles's
cache management daemon (cachefilesd).

What is required is to temporarily override the security of the process that
issued the system call.  We can't, however, just do an in-place change of the
security data as that affects the process as an object, not just as a subject.
This means it may lose signals or ptrace events for example, and affects what
the process looks like in /proc.

So CacheFiles makes use of a logical split in the security between the
objective security (task->sec) and the subjective security (task->act_as).  The
objective security holds the intrinsic security properties of a process and is
never overridden.  This is what appears in /proc, and is what is used when a
process is the target of an operation by some other process (SIGKILL for
example).

The subjective security holds the active security properties of a process, and
may be overridden.  This is not seen externally, and is used whan a process
acts upon another object, for example SIGKILLing another process or opening a
file.

LSM hooks exist that allow SELinux (or Smack or whatever) to reject a request
for CacheFiles to run in a context of a specific security label, or to create
files and directories with another security label.

This documentation is added by the patch to:

	Documentation/filesystems/caching/cachefiles.txt

Signed-Off-By: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:41 +01:00
David Howells 06b3db1b9b FS-Cache: Add main configuration option, module entry points and debugging
Add the main configuration option, allowing FS-Cache to be selected; the
module entry and exit functions and the debugging stuff used by these patches.

The two configuration options added are:

	CONFIG_FSCACHE
	CONFIG_FSCACHE_DEBUG

The first enables the facility, and the second makes the debugging statements
enableable through the "debug" module parameter.  The value of this parameter
is a bitmask as described in:

	Documentation/filesystems/caching/fscache.txt

The module can be loaded at this point, but all it will do at this point in
the patch series is to start up the slow work facility and shut it down again.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:36 +01:00
Boaz Harrosh 0d8fe329a8 fs: Add exofs to Kernel build
- Add exofs to fs/Kconfig under "menu 'Miscellaneous filesystems'"
- Add exofs to fs/Makefile

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-03-31 19:44:40 +03:00
Jan Kara 884d179dff quota: Move quota files into separate directory
Quota subsystem has more and more files. It's time to create a dir for it.

Signed-off-by: Jan Kara <jack@suse.cz>
2009-03-26 02:18:35 +01:00
Alexey Dobriyan 0fcb440889 fs/Kconfig: move 9p out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:01 +03:00
Alexey Dobriyan b2480c7fbf fs/Kconfig: move afs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:01 +03:00
Alexey Dobriyan 33a1a6fedf fs/Kconfig: move coda out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:01 +03:00
Alexey Dobriyan 9d7d6447ef fs/Kconfig: move the rest of ncpfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:01 +03:00
Alexey Dobriyan 213a41d404 fs/Kconfig: move smbfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:01 +03:00
Alexey Dobriyan 9098c24f35 fs/Kconfig: move sunrpc out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:00 +03:00
Alexey Dobriyan e2b329e200 fs/Kconfig: move nfsd out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:00 +03:00
Alexey Dobriyan 97afe47ac3 fs/Kconfig: move nfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:00 +03:00
Alexey Dobriyan a276a52f9f fs/Kconfig: move ufs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:16:00 +03:00
Alexey Dobriyan 8af915ba1d fs/Kconfig: move sysv out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:59 +03:00
Alexey Dobriyan 41810246df fs/Kconfig: move romfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:59 +03:00
Alexey Dobriyan 4c7415830c fs/Kconfig: move qnx4 out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:59 +03:00
Alexey Dobriyan 928ea19295 fs/Kconfig: move hpfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:59 +03:00
Alexey Dobriyan da55e6f928 fs/Kconfig: move omfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:58 +03:00
Alexey Dobriyan 8b1cd7d3c5 fs/Kconfig: move minix out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:58 +03:00
Alexey Dobriyan 22135169dd fs/Kconfig: move vxfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:58 +03:00
Alexey Dobriyan 22635ec9e0 fs/Kconfig: move squashfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:58 +03:00
Alexey Dobriyan 2a22783be0 fs/Kconfig: move cramfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:58 +03:00
Alexey Dobriyan 571f0a0bde fs/Kconfig: move efs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:57 +03:00
Alexey Dobriyan 0ff423849d fs/Kconfig: move bfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:57 +03:00
Alexey Dobriyan 0b09eb3298 fs/Kconfig: move befs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:57 +03:00
Alexey Dobriyan b08bac1f18 fs/Kconfig: move hfs, hfsplus out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:57 +03:00
Alexey Dobriyan 295c896cb9 fs/Kconfig: move ecryptfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:56 +03:00
Alexey Dobriyan 10951bf05d fs/Kconfig: move affs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:56 +03:00
Alexey Dobriyan bc2de2ae67 fs/Kconfig: move adfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:56 +03:00
Alexey Dobriyan 4591dabe27 fs/Kconfig: move configfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:56 +03:00
Alexey Dobriyan 5f3a211a8b fs/Kconfig: move sysfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:56 +03:00
Alexey Dobriyan 9d73ac9e8f fs/Kconfig: move ntfs out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:55 +03:00
Alexey Dobriyan 1c6ace019b fs/Kconfig: move fat out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:55 +03:00
Alexey Dobriyan ddfaccd995 fs/Kconfig: move iso9660, udf out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:55 +03:00
Alexey Dobriyan 3ef7784e47 fs/Kconfig: move fuse out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:55 +03:00
Alexey Dobriyan 90ffd46793 fs/Kconfig: move autofs, autofs4 out
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-22 13:15:54 +03:00