Commit Graph

6158 Commits

Author SHA1 Message Date
Takashi Iwai fb66ebd884 Merge branch 'fix/hda' into for-linus 2009-10-13 16:09:56 +02:00
Takashi Iwai 491dc0437d ALSA: hda - Allow all formats as default for Nvidia HDMI
In the commit f0613d5752
    ALSA: hda - Add full rates/formats support for Nvidia HDMI
the flag LIMITIED_RATE_FMT_SUPPORT was set as default, as I forgot
to clear before commit.

Let's enable all formats/rates as default.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13 16:07:59 +02:00
Philby John 29a4f2d31c ALSA: aaci: ARM1176 aaci-pl041 AC97 register read timeout
After a reboot on an ARM1176 which amounts to a softreset, it has been
noted that the ALSA driver does not get registered and the probe fails
with the error "aaci-pl041 fpga:04: ac97 read back fail". In the process
of reading from a register the SL1TxBusy bit is set indicating that the
transceiver is busy and remains so until the default timeout occurs.
Set the Power down register 0x26 to an arbitrary value as specified in
the PL041 manual (page: 3-18) so that AACISL1TX/AACISL2TX registers take
their default state.

Signed-off-by: Philby John <pjohn@in.mvista.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13 15:59:55 +02:00
Takashi Iwai ccca7cdc1b ALSA: hda - Fix volume-knob setup for Dell laptops with STAC9228
The volume-knob widget needs to be set with 0x7f instead of 0xff
for Dell laptops with STAC9228 codec, too, like the previous commit.

Reference: Novell bnc#545013
	http://bugzilla.novell.com/show_bug.cgi?id=545013

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13 15:32:21 +02:00
Takashi Iwai 54930531a0 ALSA: hda - Fix mute sound with STAC9227/9228 codecs
On FSC laptops, the sound gets muted gradually when the volume is chnaged.
This is due to the wrong volume-knob widget setup.  The delta bit (bit 7)
shouldn't be set for these devices.

This patch adds a new quirk to set the value 0x7f to the widget 0x24
instead of 0xff.

Reference: Novell bnc#546006
	http://bugzilla.novell.com/show_bug.cgi?id=546006

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13 15:29:34 +02:00
Takashi Iwai 9c6b8dcefe ALSA: bt87x - Add a whitelist for Pinnacle PCTV (11bd:0012)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13 09:34:28 +02:00
Takashi Iwai 2d9c648295 ALSA: hda - Fix overflow of spec->init_verbs in patch_realtek.c
ALC861-VD lenovo model causes overflow of spec->init_verbs entries due to
the recent changes.  Simply increase the array size to avoid the overflow.

Reported-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13 08:06:55 +02:00
David Henningsson bd3c200e6d ALSA: ice1724 - Make call to set hw params succeed on ESI Juli@
If two streams are started immediately after one another (such as a
playback and a recording stream), the call to set hw params fails with
EBUSY. This patch makes the call succeed, so playback and recording will
work properly.

Signed-off-by: David Henningsson <launchpad.web@epost.diwic.se>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11 18:07:21 +02:00
Robert Hancock 43189a38da ALSA: ice1724: Fix surround on Chaintech AV-710
Fix the num_total_dacs setting for Chaintech AV710. The existing comment
that only PSDOUT0 is connected is correct, but since the card is using
packed AC97 mode to send 6 channels to the codec, num_total_dacs should be
set to 6 and not 2. This allows 6-channel surround to work. Also clarify
a comment regarding the additional WM8728 codec on this card (it's connected
to the SPDIF output and always receives the same data).

Signed-off-by: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-10 10:53:16 +02:00
Takashi Iwai f0613d5752 ALSA: hda - Add full rates/formats support for Nvidia HDMI
Allow Nvidia HDMI to support more possible sample rates and formats.
At best, the really supported rates and formats should be determined
together with the negotiation with the HDMI receiver, but it's currently
not implemented yet (Nvidia stuff seems incompatible with HDMI 1.3
standard in this regard).  As a compromise, we enable all bits, assuming
that all recent devices do support such rates/formats.

Tested-by: Alan Alan <alanwww1@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-09 17:44:08 +02:00
Takashi Iwai 378e869fd0 Merge branch 'fix/misc' into for-linus 2009-10-08 13:00:02 +02:00
Takashi Iwai d2a764dd8e Merge branch 'fix/hda' into for-linus 2009-10-08 12:59:58 +02:00
Robert Hancock 1d4efa6650 ALSA: ice1724: increase SPDIF and independent stereo buffer sizes
Increase the default and maximum PCM buffer prellocation size for ice1724's
SPDIF and independent stereo pair outputs to 256K, which is the hardware's
maximum supported size. This allows a reduction in interrupt rate and
potentially power usage when an application is not latency-critical.

Signed-off-by: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-08 11:48:11 +02:00
Krzysztof Helt 8dce39b895 ALSA: opl3: circular locking in the snd_opl3_note_on() and snd_opl3_note_off()
Fix following circular locking in the opl3 driver.

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.32-rc3 #87
-------------------------------------------------------
swapper/0 is trying to acquire lock:
 (&opl3->voice_lock){..-...}, at: [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]

but task is already holding lock:
 (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&opl3->sys_timer_lock){..-...}:
       [<c02461d5>] validate_chain+0xa25/0x1040
       [<c0246aca>] __lock_acquire+0x2da/0xab0
       [<c024731a>] lock_acquire+0x7a/0xa0
       [<c044c300>] _spin_lock_irqsave+0x40/0x60
       [<cca75046>] snd_opl3_note_on+0x686/0x790 [snd_opl3_synth]
       [<cca68912>] snd_midi_process_event+0x322/0x590 [snd_seq_midi_emul]
       [<cca74245>] snd_opl3_synth_event_input+0x15/0x20 [snd_opl3_synth]
       [<cca4dcc0>] snd_seq_deliver_single_event+0x100/0x200 [snd_seq]
       [<cca4de07>] snd_seq_deliver_event+0x47/0x1f0 [snd_seq]
       [<cca4e50b>] snd_seq_dispatch_event+0x3b/0x140 [snd_seq]
       [<cca5008c>] snd_seq_check_queue+0x10c/0x120 [snd_seq]
       [<cca5037b>] snd_seq_enqueue_event+0x6b/0xe0 [snd_seq]
       [<cca4e0fd>] snd_seq_client_enqueue_event+0xdd/0x100 [snd_seq]
       [<cca4eb7a>] snd_seq_write+0xea/0x190 [snd_seq]
       [<c02827b6>] vfs_write+0x96/0x160
       [<c0282c9d>] sys_write+0x3d/0x70
       [<c0202c45>] syscall_call+0x7/0xb

-> #0 (&opl3->voice_lock){..-...}:
       [<c02467e6>] validate_chain+0x1036/0x1040
       [<c0246aca>] __lock_acquire+0x2da/0xab0
       [<c024731a>] lock_acquire+0x7a/0xa0
       [<c044c300>] _spin_lock_irqsave+0x40/0x60
       [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
       [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth]
       [<c022ac46>] run_timer_softirq+0x166/0x1e0
       [<c02269e8>] __do_softirq+0x78/0x110
       [<c0226ac6>] do_softirq+0x46/0x50
       [<c0226e26>] irq_exit+0x36/0x40
       [<c0204bd2>] do_IRQ+0x42/0xb0
       [<c020328e>] common_interrupt+0x2e/0x40
       [<c021092f>] apm_cpu_idle+0x10f/0x290
       [<c0201b11>] cpu_idle+0x21/0x40
       [<c04443cd>] rest_init+0x4d/0x60
       [<c055c835>] start_kernel+0x235/0x280
       [<c055c066>] i386_start_kernel+0x66/0x70

other info that might help us debug this:

2 locks held by swapper/0:
 #0:  (&opl3->tlist){+.-...}, at: [<c022abd0>] run_timer_softirq+0xf0/0x1e0
 #1:  (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth]

stack backtrace:
Pid: 0, comm: swapper Not tainted 2.6.32-rc3 #87
Call Trace:
 [<c0245188>] print_circular_bug+0xc8/0xd0
 [<c02467e6>] validate_chain+0x1036/0x1040
 [<c0247f14>] ? check_usage_forwards+0x54/0xd0
 [<c0246aca>] __lock_acquire+0x2da/0xab0
 [<c024731a>] lock_acquire+0x7a/0xa0
 [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
 [<c044c300>] _spin_lock_irqsave+0x40/0x60
 [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
 [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
 [<c044c307>] ? _spin_lock_irqsave+0x47/0x60
 [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth]
 [<c022ac46>] run_timer_softirq+0x166/0x1e0
 [<c022abd0>] ? run_timer_softirq+0xf0/0x1e0
 [<cca75150>] ? snd_opl3_timer_func+0x0/0xc0 [snd_opl3_synth]
 [<c02269e8>] __do_softirq+0x78/0x110
 [<c044c0fd>] ? _spin_unlock+0x1d/0x20
 [<c025915f>] ? handle_level_irq+0xaf/0xe0
 [<c0226ac6>] do_softirq+0x46/0x50
 [<c0226e26>] irq_exit+0x36/0x40
 [<c0204bd2>] do_IRQ+0x42/0xb0
 [<c024463c>] ? trace_hardirqs_on_caller+0x12c/0x180
 [<c020328e>] common_interrupt+0x2e/0x40
 [<c0208d88>] ? default_idle+0x38/0x50
 [<c021092f>] apm_cpu_idle+0x10f/0x290
 [<c0201b11>] cpu_idle+0x21/0x40
 [<c04443cd>] rest_init+0x4d/0x60
 [<c055c835>] start_kernel+0x235/0x280
 [<c055c210>] ? unknown_bootoption+0x0/0x210
 [<c055c066>] i386_start_kernel+0x66/0x70

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-08 11:48:10 +02:00
Pavel Hofman 2bdf66331c ALSA: ICE1712/24 - Change the Multi Track Peak control (level meters) from MIXER to PCM type
* PLEASE NOTE - this change requires the corresponding update of
  envy24control for ice1712 - kind of an ABI change.
* The "Multi Track Peak" control is read-only level meters indicator.
* The control is VERY confusing to most users since it is currently displayed
  in regular mixers. E.g. alsamixer ignores its read-only status
  and allows changing the levels with keys which makes no sense.

Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-08 11:47:56 +02:00
Takashi Iwai defb5ab2e0 ALSA: hda - Fix yet another auto-mic bug in ALC268
Since patch_alc268() doesn't call set_capture_mixer() (due to its h/w
design different from other siblings), it needs to call fixup_automic_adc()
explicitly to set up the auto-mic routing.  Otherwise the indices for
int/ext mics aren't set properly.

Reference: Novell bnc#544899
	http://bugzilla.novell.com/show_bug.cgi?id=544899

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-07 15:12:27 +02:00
Mark Brown 6f775ba015 Merge branch 'upstream/wm8350' into for-2.6.32 2009-10-06 19:29:47 +01:00
Mark Brown 5b7dde3468 ASoC: WM8350 capture PGA mutes are inverted
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
2009-10-06 19:27:56 +01:00
Mark Brown b266002abf ASoC: Remove absent SYNC and TDM DAI format options from i.MX SSI
These should be handled via set_tdm_slot() now and cause build
failures as-is.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-06 19:26:57 +01:00
Clemens Ladisch 2fb930b53f sound: via82xx: move DXS volume controls to PCM interface
The "VIA DXS" controls are actually volume controls that apply to the
four PCM substreams, so we better indicate this connection by moving the
controls to the PCM interface.

Commit b452e08e73 in 2.6.30 broke the
restoring of these volumes by "alsactl restore" that most distributions
use; the renaming in this patch cures that regression by preventing
alsactl from applying the old, wrong volume levels to the new controls.
http://bugzilla.kernel.org/show_bug.cgi?id=14151
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=532613

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06 14:58:58 +02:00
Takashi Iwai 01d4825df6 ALSA: hda - Don't pick up invalid HP pins in alc_subsystem_id()
alc_subsystem_id() tries to pick up a headphone pin if not configured,
but this caused side-effects as the problem in commit
15870f05e9.

This patch fixes the driver behavior to pick up invalid HP pins; at least,
the pins that are listed as the primary outputs aren't taken any more.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06 13:21:54 +02:00
Mark Brown 2a0f5cb327 Merge branch 'for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.32 2009-10-06 12:11:09 +01:00
Takashi Iwai f8f25ba356 ALSA: hda - Add a workaround for ASUS A7K
ASUS A7K needs additional GPIO1 bit setup; it has to be cleared.
Added a new fixup hook for this laptop so that it works as is.

Refernece: Novell bnc#494309
	http://bugzilla.novell.com/show_bug.cgi?id=494309

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06 08:31:29 +02:00
Takashi Iwai 15870f05e9 ALSA: hda - Fix invalid initializations for ALC861 auto mode
The recent auto-parser doesn't work for machines with a single output
with ALC861, such as Toshiba laptops, because alc_subsystem_id() sets
the hp_pins[0] while it's listed in line_outs[0].
This ends up with the doubled initialization of the same mixer widget,
and it mutes the DAC route because hp_pins has no DAC assigned.

To fix this problem, just check spec->autocfg.hp_outs and speaker_outs
so that they are really detected pins.

Reference: Novell bnc#544161
	http://bugzilla.novell.com/show_bug.cgi?id=544161

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-05 08:29:49 +02:00
Linus Torvalds f0a221ef47 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (21 commits)
  ALSA: usb - Use strlcat() correctly
  ALSA: Fix invalid __exit in sound/mips/*.c
  ALSA: hda - Fix / improve ALC66x parser
  ALSA: ctxfi: Swapped SURROUND-SIDE mute
  sound: Make keywest_driver static
  ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-B1VP
  ALSA: hda - Fix digita/analog mic auto-switching with IDT codecs
  ASoC: fix kconfig order of Blackfin drivers
  ALSA: hda - Added quirk to enable sound on Toshiba NB200
  ASoC: Fix dependency of CONFIG_SND_PXA2XX_SOC_IMOTE2
  ALSA: Don't assume i2c device probing always succeeds
  ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-T350P
  ALSA: echoaudio - Re-enable the line-out control for the Mia card
  ALSA: hda - Resurrect input-source mixer of ALC268 model=acer
  ALSA: hda - Analog Devices AD1984A add HP Touchsmart model
  ALSA: hda - Add HP Pavilion dv4t-1300 to MSI whitelist
  ALSA: hda - CD-audio sound for hda-intel conexant benq laptop
  ASoC: DaVinci: Correct McASP FIFO initialization
  ASoC: Davinci: Fix race with cpu_dai->dma_data
  ASoC: DaVinci: Fix divide by zero error during 1st execution
  ...
2009-10-03 11:25:30 -07:00
Takashi Iwai 7fa9742bf7 Merge branch 'fix/hda' into for-linus 2009-10-03 18:31:33 +02:00
Takashi Iwai a1cb9cd697 Merge branch 'fix/asoc' into for-linus 2009-10-03 18:31:22 +02:00
Jonathan Cameron e655a43544 ASoC: wm8940: Fix check on error code form snd_soc_codec_set_cache_io
Fix for typo in commit 8d50e447d1
ASoC: Factor out I/O for Wolfson 8 bit data 16 bit register CODECs

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-02 16:10:55 +01:00
Takashi Iwai 08d1e63508 ALSA: usb - Use strlcat() correctly
Don't pass the advanced position to strlcat() but just gives the buffer
head position so that the max size limit can be checked correctly.
Introduced a new helper function to standaralize strlcat() calls.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02 14:06:08 +02:00
Peter Ujfalusi eaeae5d9b7 ASoC: Fix SND_SOC_DAPM_LINE handling
Since the SND_SOC_DAPM_LINE can be input or output, additional check is
needed in order to determine if the widget is connected as input or
output.
When checking for connected outputs, if the widget is line, than check
if the sources list is not empty (line is connected as output)
For input endpoint check, when the widget is line, also check if the
sinks list is not empty (line is connected as input).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-02 11:23:21 +01:00
Takashi Iwai 2f229a31aa ALSA: Fix invalid __exit in sound/mips/*.c
The remove callback has to be marked as __devexit, as the dynamic unbind
is possible.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02 11:06:16 +02:00
Takashi Iwai 7085ec12a6 ALSA: hda - Fix / improve ALC66x parser
The auto-parser for ALC662/663/272 codecs doesn't work properly when
a speaker is connected to mono NID 0x17, and doesn't handle the dynamic
DAC assignment properly.

This patch fixes the issues and also improves the assignment of DACs
so that HP and speakers can have independent volume controls.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02 09:03:58 +02:00
Sven Eckelmann 3b04691c2b ALSA: ctxfi: Swapped SURROUND-SIDE mute
On Soundblaster X-FI Titenium with emu20k2 the SIDE and SURROUND mute
functions are swapped.
It was checked with 'speaker-test -c 8 -s 3' and (un)mute surround or
'speaker-test -c 8 -s 7' and (un)mute side. The volume seems not
to be affected and works as expected.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02 07:45:55 +02:00
Jean Delvare a656cbf07f sound: Make keywest_driver static
I can't see any reason for struct i2c_driver keywest_driver to not be
static.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02 07:38:37 +02:00
Daniel T Chen ebb6f6acbc ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-B1VP
BugLink: https://bugs.launchpad.net/bugs/410933

This Sony VAIO model also needs External Amplifier unmuted for audible
playback, so make sure we set the inv_eapd quirk.

Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02 07:35:26 +02:00
Takashi Iwai 02d3332285 ALSA: hda - Fix digita/analog mic auto-switching with IDT codecs
When the auto-mic switching between an analog and a digital mic is
needed with IDT codecs, the current driver doesn't reset the connection
of the digital mux.

This patch fixes the behavior by checking both mux connections properly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01 16:38:11 +02:00
Mark Brown 834eb6c599 Merge remote branch 'takashi/fix/asoc' into for-2.6.32 2009-10-01 11:33:26 +01:00
Barry Song df1246d84a ASoC: fix kconfig order of Blackfin drivers
Some of the Blackfin options don't directly follow the kconfig options
they depend on, so kconfig is unable to display the proper tree.  So sort
the options such they expand/collapse properly.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-01 11:27:27 +01:00
Manoj Iyer 3db6c037c6 ALSA: hda - Added quirk to enable sound on Toshiba NB200
Patch was tested on Toshiba NB200 and is found to enable sound.

Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01 10:24:08 +02:00
Takashi Iwai c877c25170 ASoC: Fix dependency of CONFIG_SND_PXA2XX_SOC_IMOTE2
wm8940 requires I2C.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01 08:33:47 +02:00
Takashi Iwai 18c4078489 ALSA: Don't assume i2c device probing always succeeds
The client->driver pointer can be NULL when i2c-device probing fails
in i2c_new_device().  This patch adds the NULL checks for client->driver
and return the error instead of blind assumption of driver availability.

Reported-by: Tim Shepard <shep@alum.mit.edu>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01 07:46:33 +02:00
Daniel T Chen 5da5b6f9e9 ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-T350P
BugLink: https://bugs.launchpad.net/bugs/410933

This Sony VAIO model needs External Amplifier unmuted for audible
playback, so make sure we set the inv_eapd quirk.

Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01 07:43:05 +02:00
Giuliano Pochini 392bf2f1ba ALSA: echoaudio - Re-enable the line-out control for the Mia card
Mia has an undocumented line-out control, and it has to be exposed.

Signed-off-by: Giuliano Pochini <pochini@shiny.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-30 08:26:45 +02:00
Takashi Iwai 432fd13359 ALSA: hda - Resurrect input-source mixer of ALC268 model=acer
In the commit fdbc66266c, I mistakenly
replaced the capture mixer array for ALC268_ACER to nosrc version
although this should be kept to alt_mixer.  Now fixed back.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-30 08:13:44 +02:00
Miguel de Barros a72cb4bc85 ALSA: hda - Analog Devices AD1984A add HP Touchsmart model
Reference: ALSA bug #0004614
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4614

port-A (0x11)      - front hp-out
port-D (0x12)      - rear line out
port-E (0x1c)      - front mic-in
port-F (0x16)      - Internal speakers
digital-mic (0x17) - Internal mic

init verbs, mixers, jack sensing and PCI_QUIRK to support this hardware

Signed-off-by: Miguel de Barros <miguel.de.barros@bluewin.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-29 09:15:05 +02:00
Alexey Dobriyan f0f37e2f77 const: mark struct vm_struct_operations
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 11:39:25 -07:00
Russell King baea7b946f Merge branch 'origin' into for-linus
Conflicts:
	MAINTAINERS
2009-09-24 21:22:33 +01:00
Daniel T Chen 3d80dcaca1 ALSA: hda - Add HP Pavilion dv4t-1300 to MSI whitelist
BugLink: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=547994

Enable MSI by default for this Pavilion model.

Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-24 12:14:37 +02:00
Lukasz Marcinowski 22e141300e ALSA: hda - CD-audio sound for hda-intel conexant benq laptop
After puting a cd-audio inside my laptop there was no sound out here,
so I decided to install alsa-driver with debug level and setup a
model=test, it didn't help, but then I look at source code and added
this few lines, now cd-audio is working both when playback/recording.

[Additional minor fixes of mixer element/item names by tiwai]

Signed-off-by: Lukasz Marcinowski <nowymarluk@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-24 09:49:25 +02:00
Chaithrika U S 539d3d8cbe ASoC: DaVinci: Correct McASP FIFO initialization
McASP write FIFO registers should be modified for playback and read FIFO
registers for capture. Check the PCM mode before manipulating the
FIFO registers. Currently, irrespective of playback/capture both the
FIFOs are enabled or disbaled. This resulted in errors in audio loopback
mode.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-23 10:37:08 -07:00