Commit Graph

30 Commits

Author SHA1 Message Date
Andrew Morton 69b27baf00 sched: add schedule_timeout_idle()
This will be needed in the patch "mm, oom: introduce oom reaper".

Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
John Stultz da8b44d5a9 timer: convert timer_slack_ns from unsigned long to u64
This patchset introduces a /proc/<pid>/timerslack_ns interface which
would allow controlling processes to be able to set the timerslack value
on other processes in order to save power by avoiding wakeups (Something
Android currently does via out-of-tree patches).

The first patch tries to fix the internal timer_slack_ns usage which was
defined as a long, which limits the slack range to ~4 seconds on 32bit
systems.  It converts it to a u64, which provides the same basically
unlimited slack (500 years) on both 32bit and 64bit machines.

The second patch introduces the /proc/<pid>/timerslack_ns interface
which allows the full 64bit slack range for a task to be read or set on
both 32bit and 64bit machines.

With these two patches, on a 32bit machine, after setting the slack on
bash to 10 seconds:

$ time sleep 1

real    0m10.747s
user    0m0.001s
sys     0m0.005s

The first patch is a little ugly, since I had to chase the slack delta
arguments through a number of functions converting them to u64s.  Let me
know if it makes sense to break that up more or not.

Other than that things are fairly straightforward.

This patch (of 2):

The timer_slack_ns value in the task struct is currently a unsigned
long.  This means that on 32bit applications, the maximum slack is just
over 4 seconds.  However, on 64bit machines, its much much larger (~500
years).

This disparity could make application development a little (as well as
the default_slack) to a u64.  This means both 32bit and 64bit systems
have the same effective internal slack range.

Now the existing ABI via PR_GET_TIMERSLACK and PR_SET_TIMERSLACK specify
the interface as a unsigned long, so we preserve that limitation on
32bit systems, where SET_TIMERSLACK can only set the slack to a unsigned
long value, and GET_TIMERSLACK will return ULONG_MAX if the slack is
actually larger then what can be stored by an unsigned long.

This patch also modifies hrtimer functions which specified the slack
delta as a unsigned long.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oren Laadan <orenl@cellrox.com>
Cc: Ruchi Kandoi <kandoiruchi@google.com>
Cc: Rom Lemarchand <romlem@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Tejun Heo 22b886dd10 timers: Use proper base migration in add_timer_on()
Regardless of the previous CPU a timer was on, add_timer_on()
currently simply sets timer->flags to the new CPU.  As the caller must
be seeing the timer as idle, this is locally fine, but the timer
leaving the old base while unlocked can lead to race conditions as
follows.

Let's say timer was on cpu 0.

  cpu 0					cpu 1
  -----------------------------------------------------------------------------
  del_timer(timer) succeeds
					del_timer(timer)
					  lock_timer_base(timer) locks cpu_0_base
  add_timer_on(timer, 1)
    spin_lock(&cpu_1_base->lock)
    timer->flags set to cpu_1_base
    operates on @timer			  operates on @timer

This triggered with mod_delayed_work_on() which contains
"if (del_timer()) add_timer_on()" sequence eventually leading to the
following oops.

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff810ca6e9>] detach_if_pending+0x69/0x1a0
  ...
  Workqueue: wqthrash wqthrash_workfunc [wqthrash]
  task: ffff8800172ca680 ti: ffff8800172d0000 task.ti: ffff8800172d0000
  RIP: 0010:[<ffffffff810ca6e9>]  [<ffffffff810ca6e9>] detach_if_pending+0x69/0x1a0
  ...
  Call Trace:
   [<ffffffff810cb0b4>] del_timer+0x44/0x60
   [<ffffffff8106e836>] try_to_grab_pending+0xb6/0x160
   [<ffffffff8106e913>] mod_delayed_work_on+0x33/0x80
   [<ffffffffa0000081>] wqthrash_workfunc+0x61/0x90 [wqthrash]
   [<ffffffff8106dba8>] process_one_work+0x1e8/0x650
   [<ffffffff8106e05e>] worker_thread+0x4e/0x450
   [<ffffffff810746af>] kthread+0xef/0x110
   [<ffffffff8185980f>] ret_from_fork+0x3f/0x70

Fix it by updating add_timer_on() to perform proper migration as
__mod_timer() does.

Reported-and-tested-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Chris Worley <chris.worley@primarydata.com>
Cc: bfields@fieldses.org
Cc: Michael Skralivetsky <michael.skralivetsky@primarydata.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: kernel-team@fb.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20151029103113.2f893924@tlielax.poochiereds.net
Link: http://lkml.kernel.org/r/20151104171533.GI5749@mtj.duckdns.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-04 20:23:19 +01:00
Rasmus Villemoes 9fc4468d54 timers: Use __fls in apply_slack()
In apply_slack(), find_last_bit() is applied to a bitmask consisting
of precisely BITS_PER_LONG bits. Since mask is non-zero, we might as
well eliminate the function call and use __fls() directly. On x86_64,
this shaves 23 bytes of the only caller, mod_timer().

This also gets rid of Coverity CID 1192106, but that is a false
positive: Coverity is not aware that mask != 0 implies that
find_last_bit will not return BITS_PER_LONG.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/1443771931-6284-1-git-send-email-linux@rasmusvillemoes.dk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-11 22:13:46 +02:00
Dmitry Vyukov 3ed769bdb2 timers: Fix data race in timer_stats_account_timer()
timer_stats_account_timer() reads timer->start_site, then checks it
for NULL and then re-reads it again, while
timer_stats_timer_clear_start_info() can concurrently reset
timer->start_site to NULL. This should not lead to crashes, but can
double number of entries in timer stats as start_site is used during
comparison, the doubled entries will have unuseful NULL start_site.

Read timer->start_site only once in timer_stats_account_timer().

The data race was found with KernelThreadSanitizer (KTSAN).

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: andreyknvl@google.com
Cc: glider@google.com
Cc: kcc@google.com
Cc: ktsan@googlegroups.com
Cc: john.stultz@linaro.org
Link: http://lkml.kernel.org/r/1442584463-69553-1-git-send-email-dvyukov@google.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-22 15:43:18 +02:00
Eric Dumazet d0023a1448 timer: Write timer->flags atomically
lock_timer_base() cannot prevent the following :

CPU1 ( in __mod_timer()
timer->flags |= TIMER_MIGRATING;
spin_unlock(&base->lock);
base = new_base;
spin_lock(&base->lock);
// The next line clears TIMER_MIGRATING
timer->flags &= ~TIMER_BASEMASK;
                                  CPU2 (in lock_timer_base())
                                  see timer base is cpu0 base
                                  spin_lock_irqsave(&base->lock, *flags);
                                  if (timer->flags == tf)
                                       return base; // oops, wrong base
timer->flags |= base->cpu // too late

We must write timer->flags in one go, otherwise we can fool other cpus.

Fixes: bc7a34b8b9 ("timer: Reduce timer migration overhead if disabled")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jon Christopherson <jon@jons.org>
Cc: David Miller <davem@davemloft.net>
Cc: xen-devel@lists.xen.org
Cc: david.vrabel@citrix.com
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Link: http://lkml.kernel.org/r/1439831928.32680.11.camel@edumazet-glaptop2.roam.corp.google.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
2015-08-18 15:31:16 +02:00
Thomas Gleixner 24bfcb1009 timer: Fix hotplug regression
The recent timer wheel rework removed the get/put_cpu_var() pair in
the hotplug migration code, which results in:

BUG: using smp_processor_id() in preemptible [00000000] code: hib.sh/2845
...
[<ffffffff810d4fa3>] timer_cpu_notify+0x53/0x12

That hunk is a leftover from an earlier iteration and went unnoticed
so far.

Restore the previous code which was obviously correct.

Fixes: 0eeda71bc3 'timer: Replace timer base by a cpu index'
Reported-and_tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-26 22:58:06 +02:00
Thomas Gleixner 683be13a28 timer: Minimize nohz off overhead
If nohz is disabled on the kernel command line the [hr]timer code
still calls wake_up_nohz_cpu() and tick_nohz_full_cpu(), a pretty
pointless exercise. Cache nohz_active in [hr]timer per cpu bases and
avoid the overhead.

Before:
  48.10%  hog       [.] main
  15.25%  [kernel]  [k] _raw_spin_lock_irqsave
   9.76%  [kernel]  [k] _raw_spin_unlock_irqrestore
   6.50%  [kernel]  [k] mod_timer
   6.44%  [kernel]  [k] lock_timer_base.isra.38
   3.87%  [kernel]  [k] detach_if_pending
   3.80%  [kernel]  [k] del_timer
   2.67%  [kernel]  [k] internal_add_timer
   1.33%  [kernel]  [k] __internal_add_timer
   0.73%  [kernel]  [k] timerfn
   0.54%  [kernel]  [k] wake_up_nohz_cpu

After:
  48.73%  hog       [.] main
  15.36%  [kernel]  [k] _raw_spin_lock_irqsave
   9.77%  [kernel]  [k] _raw_spin_unlock_irqrestore
   6.61%  [kernel]  [k] lock_timer_base.isra.38
   6.42%  [kernel]  [k] mod_timer
   3.90%  [kernel]  [k] detach_if_pending
   3.76%  [kernel]  [k] del_timer
   2.41%  [kernel]  [k] internal_add_timer
   1.39%  [kernel]  [k] __internal_add_timer
   0.76%  [kernel]  [k] timerfn

We probably should have a cached value for nohz full in the per cpu
bases as well to avoid the cpumask check. The base cache line is hot
already, the cpumask not necessarily.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224512.207378134@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 15:18:28 +02:00
Thomas Gleixner bc7a34b8b9 timer: Reduce timer migration overhead if disabled
Eric reported that the timer_migration sysctl is not really nice
performance wise as it needs to check at every timer insertion whether
the feature is enabled or not. Further the check does not live in the
timer code, so we have an extra function call which checks an extra
cache line to figure out that it is disabled.

We can do better and store that information in the per cpu (hr)timer
bases. I pondered to use a static key, but that's a nightmare to
update from the nohz code and the timer base cache line is hot anyway
when we select a timer base.

The old logic enabled the timer migration unconditionally if
CONFIG_NO_HZ was set even if nohz was disabled on the kernel command
line.

With this modification, we start off with migration disabled. The user
visible sysctl is still set to enabled. If the kernel switches to NOHZ
migration is enabled, if the user did not disable it via the sysctl
prior to the switch. If nohz=off is on the kernel command line,
migration stays disabled no matter what.

Before:
  47.76%  hog       [.] main
  14.84%  [kernel]  [k] _raw_spin_lock_irqsave
   9.55%  [kernel]  [k] _raw_spin_unlock_irqrestore
   6.71%  [kernel]  [k] mod_timer
   6.24%  [kernel]  [k] lock_timer_base.isra.38
   3.76%  [kernel]  [k] detach_if_pending
   3.71%  [kernel]  [k] del_timer
   2.50%  [kernel]  [k] internal_add_timer
   1.51%  [kernel]  [k] get_nohz_timer_target
   1.28%  [kernel]  [k] __internal_add_timer
   0.78%  [kernel]  [k] timerfn
   0.48%  [kernel]  [k] wake_up_nohz_cpu

After:
  48.10%  hog       [.] main
  15.25%  [kernel]  [k] _raw_spin_lock_irqsave
   9.76%  [kernel]  [k] _raw_spin_unlock_irqrestore
   6.50%  [kernel]  [k] mod_timer
   6.44%  [kernel]  [k] lock_timer_base.isra.38
   3.87%  [kernel]  [k] detach_if_pending
   3.80%  [kernel]  [k] del_timer
   2.67%  [kernel]  [k] internal_add_timer
   1.33%  [kernel]  [k] __internal_add_timer
   0.73%  [kernel]  [k] timerfn
   0.54%  [kernel]  [k] wake_up_nohz_cpu


Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224512.127050787@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 15:18:28 +02:00
Thomas Gleixner c74441a17e timer: Stats: Simplify the flags handling
Simplify the handling of the flag storage for the timer statistics. No
intermediate storage anymore. Just hand over the flags field.

I left the printout of 'deferrable' for now because changing this
would be an ABI update and I have no idea how strong people feel about
that. OTOH, I wonder whether we should kill the whole timer stats
stuff because all of that information can be retrieved via ftrace/perf
as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224512.046626248@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 15:18:27 +02:00
Thomas Gleixner 0eeda71bc3 timer: Replace timer base by a cpu index
Instead of storing a pointer to the per cpu tvec_base we can simply
cache a CPU index in the timer_list and use that to get hold of the
correct per cpu tvec_base. This is only used in lock_timer_base() and
the slightly larger code is peanuts versus the spinlock operation and
the d-cache foot print of the timer wheel.

Aside of that this allows to get rid of following nuisances:

 - boot_tvec_base

   That statically allocated 4k bss data is just kept around so the
   timer has a home when it gets statically initialized. It serves no
   other purpose.

   With the CPU index we assign the timer to CPU0 at static
   initialization time and therefor can avoid the whole boot_tvec_base
   dance.  That also simplifies the init code, which just can use the
   per cpu base.

   Before:
     text	   data	    bss	    dec	    hex	filename
    17491	   9201	   4160	  30852	   7884	../build/kernel/time/timer.o
   After:
     text	   data	    bss	    dec	    hex	filename
    17440	   9193	      0	  26633	   6809	../build/kernel/time/timer.o

 - Overloading the base pointer with various flags

   The CPU index has enough space to hold the flags (deferrable,
   irqsafe) so we can get rid of the extra masking and bit fiddling
   with the base pointer.

As a benefit we reduce the size of struct timer_list on 64 bit
machines. 4 - 8 bytes, a size reduction up to 15% per struct timer_list,
which is a real win as we have tons of them embedded in other structs.

This changes also the newly added deferrable printout of the timer
start trace point to capture and print all timer->flags, which allows
us to decode the target cpu of the timer as well.

We might have used bitfields for this, but that would change the
static initializers and the init function for no value to accomodate
big endian bitfields.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Badhri Jagan Sridharan <Badhri@google.com>
Link: http://lkml.kernel.org/r/20150526224511.950084301@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 15:18:27 +02:00
Thomas Gleixner 1dabbcec2c timer: Use hlist for the timer wheel hash buckets
This reduces the size of struct tvec_base by 50% and results in
slightly smaller code as well.

Before:
   struct tvec_base: size: 8256, cachelines: 129

   text	   data	    bss	    dec	    hex	filename
  17698	  13297	   8256	  39251	   9953	../build/kernel/time/timer.o

After:
  struct tvec_base: 4160, cachelines: 65

   text	   data	    bss	    dec	    hex	filename
  17491	   9201	   4160	  30852	   7884	../build/kernel/time/timer.o

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224511.854731214@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 15:18:27 +02:00
Thomas Gleixner 1bd04bf6f6 timer: Remove FIFO "guarantee"
The FIFO guarantee is only there if two timers are queued into the
same bucket at the same jiffie on the same cpu:

 - The slack value depends on the delta between expiry and enqueue
   time, so the resulting expiry time can be different for timers
   which are queued in different jiffies.

 - Timers which are queued into the secondary array end up after a
   later queued timer which was queued into the primary array due to
   cascading.

 - Timers can end up on different cpus due to the NOHZ target moving
   around. Obviously there is no guarantee of expiry ordering between
   cpus.

So anything which relies on FIFO behaviour of the timer wheel is
broken already.

This is a preparatory patch for converting the timer wheel to hlist
which reduces the memory foot print of the wheel by 50%.

It's a seperate patch so any (unlikely to happen) regression caused by
this can be identified clearly.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Cc: George Spelvin <linux@horizon.com>
Link: http://lkml.kernel.org/r/20150526224511.757520403@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 15:18:27 +02:00
Thomas Gleixner 3bb475a344 timers: Sanitize catchup_timer_jiffies() usage
catchup_timer_jiffies() has been applied blindly to several functions
without looking for possible better ways to do it.

1) internal_add_timer()

   Move the update to base->all_timers before we actually insert the
   timer into the wheel.

2) detach_if_pending()

   Again the update to base->all_timers allows us to explicitely do
   the timer_jiffies update in place, if this was the last timer which
   got removed.

3) __run_timers()

   We only check on entry, which is silly, because base->timer_jiffies
   can be behind - especially on NOHZ kernels - and if there is a
   single deferrable timer somewhere between base->timer_jiffies and
   jiffies we expire it and then loop until base->timer_jiffies ==
   jiffies.

   Move it into the loop.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224511.662994644@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 15:18:27 +02:00
Badhri Jagan Sridharan 4e413e8526 tracing: timer: Add deferrable flag to timer_start
The timer_start event now shows whether the timer is
deferrable in case of a low-res timer. The debug_activate
function now includes a deferrable flag while calling
the trace_timer_start event.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
[jstultz: Fixed minor whitespace and grammer tweaks
 pointed out by Ingo]
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-05-22 10:36:06 -07:00
Joonwoo Park 781978e6e1 timer: Use timer->base for flag checks
At present, internal_add_timer() examines flags with 'base' which doesn't
contain flags.  Examine with 'timer->base' to avoid unnecessary waking up
of nohz CPU when timer base has TIMER_DEFERRABLE set.

Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Cc: sboyd@codeaurora.org
Cc: skannan@codeaurora.org
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/1430187709-21087-1-git-send-email-joonwoop@codeaurora.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-05 10:40:43 +02:00
Thomas Gleixner 2ad5d3272d timer: Put usleep_range into the __sched section
do_usleep_range() and schedule_hrtimeout_range() are __sched as
well. So it makes no sense to have the exported function in a
different section.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203503.833709502@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:52 +02:00
Thomas Gleixner 6deba083e1 timer: Remove pointless return value of do_usleep_range()
The only user ignores it anyway and rightfully so.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203503.756060258@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:52 +02:00
Thomas Gleixner c1ad348b45 tick: Nohz: Rework next timer evaluation
The evaluation of the next timer in the nohz code is based on jiffies
while all the tick internals are nano seconds based. We have also to
convert hrtimer nanoseconds to jiffies in the !highres case. That's
just wrong and introduces interesting corner cases.

Turn it around and convert the next timer wheel timer expiry and the
rcu event to clock monotonic and base all calculations on
nanoseconds. That identifies the case where no timer is pending
clearly with an absolute expiry value of KTIME_MAX.

Makes the code more readable and gets rid of the jiffies magic in the
nohz code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Link: http://lkml.kernel.org/r/20150414203502.184198593@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:50 +02:00
Thomas Gleixner c6eb3f70d4 hrtimer: Get rid of hrtimer softirq
hrtimer softirq is a leftover from the initial implementation and
serves only the purpose to handle the enqueueing of already expired
timers in the high resolution timer mode. We discussed whether we
change the return value and force all start sites to handle that the
timer is already expired, but that would be a Herculean task and I'm
not sure whether its a good idea to enforce that handling on
everyone.

A simpler solution is to enforce a timer interrupt instead of raising
and scheduling a softirq. Just use the existing infrastructure to do
so and remove all the softirq leftovers.

The HRTIMER softirq enum is now unused, but kept around because trace
parsers rely on the existing numbering.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203501.840834708@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:50 +02:00
Peter Zijlstra 3650b57fdf timer: Further simplify the SMP and HOTPLUG logic
Remove one CONFIG_HOTPLUG_CPU #ifdef in trade for introducing one
CONFIG_SMP #ifdef.

The CONFIG_SMP ifdef avoids declaring the per-CPU __tvec_bases storage
on UP systems since they already have boot_tvec_bases.

Also (re)add a runtime check on the base alignment -- for the paranoid
amongst us :-)

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/fdd2d35e169bdc554ffa3fe77f77716298c75ada.1427814611.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02 17:46:21 +02:00
Viresh Kumar 8def906044 timer: Don't initialize 'tvec_base' on hotplug
There is no need to call init_timers_cpu() on every CPU hotplug event,
there is not much we need to reset.

 - Timer-lists are already empty at the end of migrate_timers().
 - timer_jiffies will be refreshed while adding a new timer, after the
   CPU is online again.
 - active_timers and all_timers can be reset from migrate_timers().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/54a1c30ea7b805af55beb220cadf5a07a21b0a4d.1427814611.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02 17:46:01 +02:00
Peter Zijlstra b337a9380f timer: Allocate per-cpu tvec_base's statically
Memory for the 'tvec_base' array is allocated separately for the boot CPU (statically)
and non-boot CPUs (dynamically).

The reason is because __TIMER_INITIALIZER() needs to set ->base to a
valid pointer (because we've made NULL special, hint: lock_timer_base())
and we cannot get a compile time pointer to per-cpu entries because we
don't know where we'll map the section, even for the boot cpu.

This can be simplified a bit by statically allocating per-cpu memory.
The only disadvantage is that memory for one of the structures will stay
unused, i.e. for the boot CPU, which uses boot_tvec_bases.

This will also guarantee that tvec_base is cacheline aligned. Even
though tvec_base has ____cacheline_aligned stuck on, kzalloc_node() does
not actually respect that (but guarantees a minimum u64 alignment).

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/17cdf560f2727f687ab159707d0aa591f8a2f82d.1427814611.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02 17:46:00 +02:00
Paul E. McKenney c3377c2da6 rcu: Remove "cpu" argument to rcu_check_callbacks()
The "cpu" argument was kept around on the off-chance that RCU might
offload scheduler-clock interrupts.  However, this offload approach
has been replaced by NO_HZ_FULL, which offloads -all- RCU processing
from qualifying CPUs.  It is therefore time to remove the "cpu" argument
to rcu_check_callbacks(), which this commit does.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-11-03 19:20:11 -08:00
Linus Torvalds 0429fbc0bd Merge branch 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu consistent-ops changes from Tejun Heo:
 "Way back, before the current percpu allocator was implemented, static
  and dynamic percpu memory areas were allocated and handled separately
  and had their own accessors.  The distinction has been gone for many
  years now; however, the now duplicate two sets of accessors remained
  with the pointer based ones - this_cpu_*() - evolving various other
  operations over time.  During the process, we also accumulated other
  inconsistent operations.

  This pull request contains Christoph's patches to clean up the
  duplicate accessor situation.  __get_cpu_var() uses are replaced with
  with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().

  Unfortunately, the former sometimes is tricky thanks to C being a bit
  messy with the distinction between lvalues and pointers, which led to
  a rather ugly solution for cpumask_var_t involving the introduction of
  this_cpu_cpumask_var_ptr().

  This converts most of the uses but not all.  Christoph will follow up
  with the remaining conversions in this merge window and hopefully
  remove the obsolete accessors"

* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
  irqchip: Properly fetch the per cpu offset
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
  ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
  Revert "powerpc: Replace __get_cpu_var uses"
  percpu: Remove __this_cpu_ptr
  clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
  sparc: Replace __get_cpu_var uses
  avr32: Replace __get_cpu_var with __this_cpu_write
  blackfin: Replace __get_cpu_var uses
  tile: Use this_cpu_ptr() for hardware counters
  tile: Replace __get_cpu_var uses
  powerpc: Replace __get_cpu_var uses
  alpha: Replace __get_cpu_var
  ia64: Replace __get_cpu_var uses
  s390: cio driver &__get_cpu_var replacements
  s390: Replace __get_cpu_var uses
  mips: Replace __get_cpu_var uses
  MIPS: Replace __get_cpu_var uses in FPU emulator.
  arm: Replace __this_cpu_ptr with raw_cpu_ptr
  ...
2014-10-15 07:48:18 +02:00
Frederic Weisbecker 76a33061b9 irq_work: Force raised irq work to run on irq work interrupt
The nohz full kick, which restarts the tick when any resource depend
on it, can't be executed anywhere given the operation it does on timers.
If it is called from the scheduler or timers code, chances are that
we run into a deadlock.

This is why we run the nohz full kick from an irq work. That way we make
sure that the kick runs on a virgin context.

However if that's the case when irq work runs in its own dedicated
self-ipi, things are different for the big bunch of archs that don't
support the self triggered way. In order to support them, irq works are
also handled by the timer interrupt as fallback.

Now when irq works run on the timer interrupt, the context isn't blank.
More precisely, they can run in the context of the hrtimer that runs the
tick. But the nohz kick cancels and restarts this hrtimer and cancelling
an hrtimer from itself isn't allowed. This is why we run in an endless
loop:

	Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 2
	CPU: 2 PID: 7538 Comm: kworker/u8:8 Not tainted 3.16.0+ #34
	Workqueue: btrfs-endio-write normal_work_helper [btrfs]
	 ffff880244c06c88 000000001b486fe1 ffff880244c06bf0 ffffffff8a7f1e37
	 ffffffff8ac52a18 ffff880244c06c78 ffffffff8a7ef928 0000000000000010
	 ffff880244c06c88 ffff880244c06c20 000000001b486fe1 0000000000000000
	Call Trace:
	 <NMI[<ffffffff8a7f1e37>] dump_stack+0x4e/0x7a
	 [<ffffffff8a7ef928>] panic+0xd4/0x207
	 [<ffffffff8a1450e8>] watchdog_overflow_callback+0x118/0x120
	 [<ffffffff8a186b0e>] __perf_event_overflow+0xae/0x350
	 [<ffffffff8a184f80>] ? perf_event_task_disable+0xa0/0xa0
	 [<ffffffff8a01a4cf>] ? x86_perf_event_set_period+0xbf/0x150
	 [<ffffffff8a187934>] perf_event_overflow+0x14/0x20
	 [<ffffffff8a020386>] intel_pmu_handle_irq+0x206/0x410
	 [<ffffffff8a01937b>] perf_event_nmi_handler+0x2b/0x50
	 [<ffffffff8a007b72>] nmi_handle+0xd2/0x390
	 [<ffffffff8a007aa5>] ? nmi_handle+0x5/0x390
	 [<ffffffff8a0cb7f8>] ? match_held_lock+0x8/0x1b0
	 [<ffffffff8a008062>] default_do_nmi+0x72/0x1c0
	 [<ffffffff8a008268>] do_nmi+0xb8/0x100
	 [<ffffffff8a7ff66a>] end_repeat_nmi+0x1e/0x2e
	 [<ffffffff8a0cb7f8>] ? match_held_lock+0x8/0x1b0
	 [<ffffffff8a0cb7f8>] ? match_held_lock+0x8/0x1b0
	 [<ffffffff8a0cb7f8>] ? match_held_lock+0x8/0x1b0
	 <<EOE><IRQ[<ffffffff8a0ccd2f>] lock_acquired+0xaf/0x450
	 [<ffffffff8a0f74c5>] ? lock_hrtimer_base.isra.20+0x25/0x50
	 [<ffffffff8a7fc678>] _raw_spin_lock_irqsave+0x78/0x90
	 [<ffffffff8a0f74c5>] ? lock_hrtimer_base.isra.20+0x25/0x50
	 [<ffffffff8a0f74c5>] lock_hrtimer_base.isra.20+0x25/0x50
	 [<ffffffff8a0f7723>] hrtimer_try_to_cancel+0x33/0x1e0
	 [<ffffffff8a0f78ea>] hrtimer_cancel+0x1a/0x30
	 [<ffffffff8a109237>] tick_nohz_restart+0x17/0x90
	 [<ffffffff8a10a213>] __tick_nohz_full_check+0xc3/0x100
	 [<ffffffff8a10a25e>] nohz_full_kick_work_func+0xe/0x10
	 [<ffffffff8a17c884>] irq_work_run_list+0x44/0x70
	 [<ffffffff8a17c8da>] irq_work_run+0x2a/0x50
	 [<ffffffff8a0f700b>] update_process_times+0x5b/0x70
	 [<ffffffff8a109005>] tick_sched_handle.isra.21+0x25/0x60
	 [<ffffffff8a109b81>] tick_sched_timer+0x41/0x60
	 [<ffffffff8a0f7aa2>] __run_hrtimer+0x72/0x470
	 [<ffffffff8a109b40>] ? tick_sched_do_timer+0xb0/0xb0
	 [<ffffffff8a0f8707>] hrtimer_interrupt+0x117/0x270
	 [<ffffffff8a034357>] local_apic_timer_interrupt+0x37/0x60
	 [<ffffffff8a80010f>] smp_apic_timer_interrupt+0x3f/0x50
	 [<ffffffff8a7fe52f>] apic_timer_interrupt+0x6f/0x80

To fix this we force non-lazy irq works to run on irq work self-IPIs
when available. That ability of the arch to trigger irq work self IPIs
is available with arch_irq_work_has_interrupt().

Reported-by: Catalin Iacob <iacobcatalin@gmail.com>
Reported-by: Dave Jones <davej@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-09-13 18:38:15 +02:00
Christoph Lameter 22127e93c5 time: Replace __get_cpu_var uses
Convert uses of __get_cpu_var for creating a address from a percpu
offset to this_cpu_ptr.

The two cases where get_cpu_var is used to actually access a percpu
variable are changed to use this_cpu_read/raw_cpu_read.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26 13:45:44 -04:00
Viresh Kumar 9f6d9baaa8 timer: Kick dynticks targets on mod_timer*() calls
When a timer is enqueued or modified on a dynticks target, that CPU
must re-evaluate the next tick to service that timer.

The tick re-evaluation is performed by an IPI kick on the target.
Now while we correctly call wake_up_nohz_cpu() from add_timer_on(), the
mod_timer*() API family doesn't support so well dynticks targets.

The reason for this is likely that __mod_timer() isn't supposed to
select an idle target for a timer, unless that target is the current
CPU, in which case a dynticks idle kick isn't actually needed.

But there is a small race window lurking behind that assumption: the
elected target has all the time to turn dynticks idle between the call
to get_nohz_timer_target() and the locking of its base. Hence a risk
that we enqueue a timer on a dynticks idle destination without kicking
it. As a result, the timer might be serviced too late in the future.

Also a target elected by __mod_timer() can be in full dynticks mode
and thus require to be kicked as well. And unlike idle dynticks, this
concern both local and remote targets.

To fix this whole issue, lets centralize the dynticks kick to
internal_add_timer() so that it is well handled for all sort of timer
enqueue. Even timer migration is concerned so that a full dynticks target
is correctly kicked as needed when timers are migrating to it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1403393357-2070-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-23 11:23:47 +02:00
Viresh Kumar d6f9382981 timer: Store cpu-number in struct tvec_base
Timers are serviced by the tick. But when a timer is enqueued on a
dynticks target, we need to kick it in order to make it reconsider the
next tick to schedule to correctly handle the timer's expiring time.

Now while this kick is correctly performed for add_timer_on(), the
mod_timer*() family has been a bit neglected.

To prepare for fixing this, we need internal_add_timer() to be able to
resolve the CPU target associated to a timer's object 'base' so that the
kick can be centralized there.

This can't be passed as an argument as not all the callers know the CPU
number of a timer's base. So lets store it in the struct tvec_base to
resolve the CPU without much overhead. It is set once for good at every
CPU's first boot.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1403393357-2070-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-23 11:23:46 +02:00
Thomas Gleixner 5cee964597 time/timers: Move all time(r) related files into kernel/time
Except for Kconfig.HZ. That needs a separate treatment.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-23 11:22:35 +02:00