Commit Graph

55 Commits

Author SHA1 Message Date
Marc Kleine-Budde a303fbf3db net: sched: enable CAN Identifier to be build into kernel
This patch makes it possible to build the CAN Identifier into the kernel, even
if the CAN support is build as a module.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-25 16:06:06 -05:00
Florian Westphal 6d4fa852a0 net: sched: add ipset ematch
Can be used to match packets against netfilter ip sets created via ipset(8).
skb->sk_iif is used as 'incoming interface', skb->dev is 'outgoing interface'.

Since ipset is usually called from netfilter, the ematch
initializes a fake xt_action_param, pulls the ip header into the
linear area and also sets skb->data to the IP header (otherwise
matching Layer 4 set types doesn't work).

Tested-by: Mr Dash Four <mr.dash.four@googlemail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12 07:54:46 -07:00
Rostislav Lisovy f057bbb6f9 net: em_canid: Ematch rule to match CAN frames according to their identifiers
This ematch makes it possible to classify CAN frames (AF_CAN) according
to their identifiers. This functionality can not be easily achieved with
existing classifiers, such as u32, because CAN identifier is always stored
in native endianness, whereas u32 expects Network byte order.

Signed-off-by: Rostislav Lisovy <lisovy@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-04 13:07:05 +02:00
Eric Dumazet 4b549a2ef4 fq_codel: Fair Queue Codel AQM
Fair Queue Codel packet scheduler

Principles :

- Packets are classified (internal classifier or external) on flows.
- This is a Stochastic model (as we use a hash, several flows might
                              be hashed on same slot)
- Each flow has a CoDel managed queue.
- Flows are linked onto two (Round Robin) lists,
  so that new flows have priority on old ones.

- For a given flow, packets are not reordered (CoDel uses a FIFO)
- head drops only.
- ECN capability is on by default.
- Very low memory footprint (64 bytes per flow)

tc qdisc ... fq_codel [ limit PACKETS ] [ flows number ]
                      [ target TIME ] [ interval TIME ] [ noecn ]
                      [ quantum BYTES ]

defaults : 1024 flows, 10240 packets limit, quantum : device MTU
           target : 5ms (CoDel default)
           interval : 100ms (CoDel default)

Impressive results on load :

class htb 1:1 root leaf 10: prio 0 quantum 1514 rate 200000Kbit ceil 200000Kbit burst 1475b/8 mpu 0b overhead 0b cburst 1475b/8 mpu 0b overhead 0b level 0
 Sent 43304920109 bytes 33063109 pkt (dropped 0, overlimits 0 requeues 0)
 rate 201691Kbit 28595pps backlog 0b 312p requeues 0
 lended: 33063109 borrowed: 0 giants: 0
 tokens: -912 ctokens: -912

class fq_codel 10:1735 parent 10:
 (dropped 1292, overlimits 0 requeues 0)
 backlog 15140b 10p requeues 0
  deficit 1514 count 1 lastcount 1 ldelay 7.1ms
class fq_codel 10:4524 parent 10:
 (dropped 1291, overlimits 0 requeues 0)
 backlog 16654b 11p requeues 0
  deficit 1514 count 1 lastcount 1 ldelay 7.1ms
class fq_codel 10:4e74 parent 10:
 (dropped 1290, overlimits 0 requeues 0)
 backlog 6056b 4p requeues 0
  deficit 1514 count 1 lastcount 1 ldelay 6.4ms dropping drop_next 92.0ms
class fq_codel 10:628a parent 10:
 (dropped 1289, overlimits 0 requeues 0)
 backlog 7570b 5p requeues 0
  deficit 1514 count 1 lastcount 1 ldelay 5.4ms dropping drop_next 90.9ms
class fq_codel 10:a4b3 parent 10:
 (dropped 302, overlimits 0 requeues 0)
 backlog 16654b 11p requeues 0
  deficit 1514 count 1 lastcount 1 ldelay 7.1ms
class fq_codel 10:c3c2 parent 10:
 (dropped 1284, overlimits 0 requeues 0)
 backlog 13626b 9p requeues 0
  deficit 1514 count 1 lastcount 1 ldelay 5.9ms
class fq_codel 10:d331 parent 10:
 (dropped 299, overlimits 0 requeues 0)
 backlog 15140b 10p requeues 0
  deficit 1514 count 1 lastcount 1 ldelay 7.0ms
class fq_codel 10:d526 parent 10:
 (dropped 12160, overlimits 0 requeues 0)
 backlog 35870b 211p requeues 0
  deficit 1508 count 12160 lastcount 1 ldelay 15.3ms dropping drop_next 247us
class fq_codel 10:e2c6 parent 10:
 (dropped 1288, overlimits 0 requeues 0)
 backlog 15140b 10p requeues 0
  deficit 1514 count 1 lastcount 1 ldelay 7.1ms
class fq_codel 10:eab5 parent 10:
 (dropped 1285, overlimits 0 requeues 0)
 backlog 16654b 11p requeues 0
  deficit 1514 count 1 lastcount 1 ldelay 5.9ms
class fq_codel 10:f220 parent 10:
 (dropped 1289, overlimits 0 requeues 0)
 backlog 15140b 10p requeues 0
  deficit 1514 count 1 lastcount 1 ldelay 7.1ms

qdisc htb 1: root refcnt 6 r2q 10 default 1 direct_packets_stat 0 ver 3.17
 Sent 43331086547 bytes 33092812 pkt (dropped 0, overlimits 66063544 requeues 71)
 rate 201697Kbit 28602pps backlog 0b 260p requeues 71
qdisc fq_codel 10: parent 1:1 limit 10240p flows 65536 target 5.0ms interval 100.0ms ecn
 Sent 43331086547 bytes 33092812 pkt (dropped 949359, overlimits 0 requeues 0)
 rate 201697Kbit 28602pps backlog 189352b 260p requeues 0
  maxpacket 1514 drop_overlimit 0 new_flow_count 5582 ecn_mark 125593
  new_flows_len 0 old_flows_len 11

PING 172.30.42.18 (172.30.42.18) 56(84) bytes of data.
64 bytes from 172.30.42.18: icmp_req=1 ttl=64 time=0.227 ms
64 bytes from 172.30.42.18: icmp_req=2 ttl=64 time=0.165 ms
64 bytes from 172.30.42.18: icmp_req=3 ttl=64 time=0.166 ms
64 bytes from 172.30.42.18: icmp_req=4 ttl=64 time=0.151 ms
64 bytes from 172.30.42.18: icmp_req=5 ttl=64 time=0.164 ms
64 bytes from 172.30.42.18: icmp_req=6 ttl=64 time=0.172 ms
64 bytes from 172.30.42.18: icmp_req=7 ttl=64 time=0.175 ms
64 bytes from 172.30.42.18: icmp_req=8 ttl=64 time=0.183 ms
64 bytes from 172.30.42.18: icmp_req=9 ttl=64 time=0.158 ms
64 bytes from 172.30.42.18: icmp_req=10 ttl=64 time=0.200 ms

10 packets transmitted, 10 received, 0% packet loss, time 8999ms
rtt min/avg/max/mdev = 0.151/0.176/0.227/0.022 ms

Much better than SFQ because of priority given to new flows, and fast
path dirtying less cache lines.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12 15:53:42 -04:00
Eric Dumazet 76e3cc126b codel: Controlled Delay AQM
An implementation of CoDel AQM, from Kathleen Nichols and Van Jacobson.

http://queue.acm.org/detail.cfm?id=2209336

This AQM main input is no longer queue size in bytes or packets, but the
delay packets stay in (FIFO) queue.

As we don't have infinite memory, we still can drop packets in enqueue()
in case of massive load, but mean of CoDel is to drop packets in
dequeue(), using a control law based on two simple parameters :

target : target sojourn time (default 5ms)
interval : width of moving time window (default 100ms)

Based on initial work from Dave Taht.

Refactored to help future codel inclusion as a plugin for other linux
qdisc (FQ_CODEL, ...), like RED.

include/net/codel.h contains codel algorithm as close as possible than
Kathleen reference.

net/sched/sch_codel.c contains the linux qdisc specific glue.

Separate structures permit a memory efficient implementation of fq_codel
(to be sent as a separate work) : Each flow has its own struct
codel_vars.

timestamps are taken at enqueue() time with 1024 ns precision, allowing
a range of 2199 seconds in queue, and 100Gb links support. iproute2 uses
usec as base unit.

Selected packets are dropped, unless ECN is enabled and packets can get
ECN mark instead.

Tested from 2Mb to 10Gb speeds with no particular problems, on ixgbe and
tg3 drivers (BQL enabled).

Usage: tc qdisc ... codel [ limit PACKETS ] [ target TIME ]
                          [ interval TIME ] [ ecn ]

qdisc codel 10: parent 1:1 limit 2000p target 3.0ms interval 60.0ms ecn
 Sent 13347099587 bytes 8815805 pkt (dropped 0, overlimits 0 requeues 0)
 rate 202365Kbit 16708pps backlog 113550b 75p requeues 0
  count 116 lastcount 98 ldelay 4.3ms dropping drop_next 816us
  maxpacket 1514 ecn_mark 84399 drop_overlimit 0

CoDel must be seen as a base module, and should be used keeping in mind
there is still a FIFO queue. So a typical setup will probably need a
hierarchy of several qdiscs and packet classifiers to be able to meet
whatever constraints a user might have.

One possible example would be to use fq_codel, which combines Fair
Queueing and CoDel, in replacement of sfq / sfq_red.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>
Cc: Kathleen Nichols <nichols@pollere.com>
Cc: Van Jacobson <van@pollere.net>
Cc: Tom Herbert <therbert@google.com>
Cc: Matt Mathis <mattmathis@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 23:35:02 -04:00
Shriram Rajagopalan c3059be16c net/sched: sch_plug - Queue traffic until an explicit release command
The qdisc supports two operations - plug and unplug. When the
qdisc receives a plug command via netlink request, packets arriving
henceforth are buffered until a corresponding unplug command is received.
Depending on the type of unplug command, the queue can be unplugged
indefinitely or selectively.

This qdisc can be used to implement output buffering, an essential
functionality required for consistent recovery in checkpoint based
fault-tolerance systems. Output buffering enables speculative execution
by allowing generated network traffic to be rolled back. It is used to
provide network protection for Xen Guests in the Remus high availability
project, available as part of Xen.

This module is generic enough to be used by any other system that wishes
to add speculative execution and output buffering to its applications.

This module was originally available in the linux 2.6.32 PV-OPS tree,
used as dom0 for Xen.

For more information, please refer to http://nss.cs.ubc.ca/remus/
and http://wiki.xensource.com/xenwiki/Remus

Changes in V3:
  * Removed debug output (printk) on queue overflow
  * Added TCQ_PLUG_RELEASE_INDEFINITE - that allows the user to
    use this qdisc, for simple plug/unplug operations.
  * Use of packet counts instead of pointers to keep track of
    the buffers in the queue.

Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Signed-off-by: Brendan Cully <brendan@cs.ubc.ca>
[author of the code in the linux 2.6.32 pvops tree]
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-07 12:54:56 -05:00
Randy Dunlap 034cfe48d0 networking: NET_CLS_ROUTE4 depends on INET
IP_ROUTE_CLASSID depends on INET and NET_CLS_ROUTE4 selects
IP_ROUTE_CLASSID, but when INET is not enabled, this kconfig warning
is produced, so fix it by making NET_CLS_ROUTE4 depend on INET.

warning: (NET_CLS_ROUTE4) selects IP_ROUTE_CLASSID which has unmet direct dependencies (NET && INET)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 19:23:28 -04:00
stephen hemminger 0545a30377 pkt_sched: QFQ - quick fair queue scheduler
This is an implementation of the Quick Fair Queue scheduler developed
by Fabio Checconi. The same algorithm is already implemented in ipfw
in FreeBSD. Fabio had an earlier version developed on Linux, I just
cleaned it up.  Thanks to Eric Dumazet for testing this under load.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04 11:10:24 -07:00
Eric Dumazet e13e02a3c6 net_sched: SFB flow scheduler
This is the Stochastic Fair Blue scheduler, based on work from :

W. Feng, D. Kandlur, D. Saha, K. Shin. Blue: A New Class of Active Queue
Management Algorithms. U. Michigan CSE-TR-387-99, April 1999.

http://www.thefengs.com/wuchang/blue/CSE-TR-387-99.pdf

This implementation is based on work done by Juliusz Chroboczek

General SFB algorithm can be found in figure 14, page 15:

B[l][n] : L x N array of bins (L levels, N bins per level)
enqueue()
Calculate hash function values h{0}, h{1}, .. h{L-1}
Update bins at each level
for i = 0 to L - 1
   if (B[i][h{i}].qlen > bin_size)
      B[i][h{i}].p_mark += p_increment;
   else if (B[i][h{i}].qlen == 0)
      B[i][h{i}].p_mark -= p_decrement;
p_min = min(B[0][h{0}].p_mark ... B[L-1][h{L-1}].p_mark);
if (p_min == 1.0)
    ratelimit();
else
    mark/drop with probabilty p_min;

I did the adaptation of Juliusz code to meet current kernel standards,
and various changes to address previous comments :

http://thread.gmane.org/gmane.linux.network/90225
http://thread.gmane.org/gmane.linux.network/90375

Default flow classifier is the rxhash introduced by RPS in 2.6.35, but
we can use an external flow classifier if wanted.

tc qdisc add dev $DEV parent 1:11 handle 11:  \
        est 0.5sec 2sec sfb limit 128

tc filter add dev $DEV protocol ip parent 11: handle 3 \
        flow hash keys dst divisor 1024

Notes:

1) SFB default child qdisc is pfifo_fast. It can be changed by another
qdisc but a child qdisc MUST not drop a packet previously queued. This
is because SFB needs to handle a dequeued packet in order to maintain
its virtual queue states. pfifo_head_drop or CHOKe should not be used.

2) ECN is enabled by default, unlike RED/CHOKe/GRED

With help from Patrick McHardy & Andi Kleen

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Juliusz Chroboczek <Juliusz.Chroboczek@pps.jussieu.fr>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Patrick McHardy <kaber@trash.net>
CC: Andi Kleen <andi@firstfloor.org>
CC: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 14:05:11 -08:00
stephen hemminger 45e144339a sched: CHOKe flow scheduler
CHOKe ("CHOose and Kill" or "CHOose and Keep") is an alternative
packet scheduler based on the Random Exponential Drop (RED) algorithm.

The core idea is:
  For every packet arrival:
  	Calculate Qave
	if (Qave < minth)
	     Queue the new packet
	else
	     Select randomly a packet from the queue
	     if (both packets from same flow)
	     then Drop both the packets
	     else if (Qave > maxth)
	          Drop packet
	     else
	       	  Admit packet with proability p (same as RED)

See also:
  Rong Pan, Balaji Prabhakar, Konstantinos Psounis, "CHOKe: a stateless active
   queue management scheme for approximating fair bandwidth allocation",
  Proceeding of INFOCOM'2000, March 2000.

Help from:
     Eric Dumazet <eric.dumazet@gmail.com>
     Patrick McHardy <kaber@trash.net>

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02 20:52:42 -08:00
David S. Miller a07aa004c8 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6 2011-01-20 00:06:15 -08:00
John Fastabend b8970f0bfc net_sched: implement a root container qdisc sch_mqprio
This implements a mqprio queueing discipline that by default creates
a pfifo_fast qdisc per tx queue and provides the needed configuration
interface.

Using the mqprio qdisc the number of tcs currently in use along
with the range of queues alloted to each class can be configured. By
default skbs are mapped to traffic classes using the skb priority.
This mapping is configurable.

Configurable parameters,

struct tc_mqprio_qopt {
	__u8    num_tc;
	__u8    prio_tc_map[TC_BITMASK + 1];
	__u8    hw;
	__u16   count[TC_MAX_QUEUE];
	__u16   offset[TC_MAX_QUEUE];
};

Here the count/offset pairing give the queue alignment and the
prio_tc_map gives the mapping from skb->priority to tc.

The hw bit determines if the hardware should configure the count
and offset values. If the hardware bit is set then the operation
will fail if the hardware does not implement the ndo_setup_tc
operation. This is to avoid undetermined states where the hardware
may or may not control the queue mapping. Also minimal bounds
checking is done on the count/offset to verify a queue does not
exceed num_tx_queues and that queue ranges do not overlap. Otherwise
it is left to user policy or hardware configuration to create
useful mappings.

It is expected that hardware QOS schemes can be implemented by
creating appropriate mappings of queues in ndo_tc_setup().

One expected use case is drivers will use the ndo_setup_tc to map
queue ranges onto 802.1Q traffic classes. This provides a generic
mechanism to map network traffic onto these traffic classes and
removes the need for lower layer drivers to know specifics about
traffic types.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19 23:31:11 -08:00
Patrick McHardy 14f0290ba4 Merge branch 'master' of /repos/git/net-next-2.6 2011-01-19 23:51:37 +01:00
Patrick McHardy c7066f70d9 netfilter: fix Kconfig dependencies
Fix dependencies of netfilter realm match: it depends on NET_CLS_ROUTE,
which itself depends on NET_SCHED; this dependency is missing from netfilter.

Since matching on realms is also useful without having NET_SCHED enabled and
the option really only controls whether the tclassid member is included in
route and dst entries, rename the config option to IP_ROUTE_CLASSID and move
it outside of traffic scheduling context to get rid of the NET_SCHED dependeny.

Reported-by: Vladis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-01-14 13:36:42 +01:00
Michael Witten c996d8b9a8 Docs/Kconfig: Update: osdl.org -> linuxfoundation.org
Some of the documentation refers to web pages under
the domain `osdl.org'. However, `osdl.org' now
redirects to `linuxfoundation.org'.

Rather than rely on redirections, this patch updates
the addresses appropriately; for the most part, only
documentation that is meant to be current has been
updated.

The patch should be pretty quick to scan and check;
each new web-page url was gotten by trying out the
original URL in a browser and then simply copying the
the redirected URL (formatting as necessary).

There is some conflict as to which one of these domain
names is preferred:

  linuxfoundation.org
  linux-foundation.org

So, I wrote:

  info@linuxfoundation.org

and got this reply:

  Message-ID: <4CE17EE6.9040807@linuxfoundation.org>
  Date: Mon, 15 Nov 2010 10:41:42 -0800
  From: David Ames <david@linuxfoundation.org>

  ...

  linuxfoundation.org is preferred. The canonical name for our web site is
  www.linuxfoundation.org. Our list site is actually
  lists.linux-foundation.org.

  Regarding email linuxfoundation.org is preferred there are a few people
  who choose to use linux-foundation.org for their own reasons.

Consequently, I used `linuxfoundation.org' for web pages and
`lists.linux-foundation.org' for mailing-list web pages and email addresses;
the only personal email address I updated from `@osdl.org' was that of
Andrew Morton, who prefers `linux-foundation.org' according `git log'.

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-15 23:50:13 +01:00
David S. Miller 7abac68602 pkt_sched: Make act_csum depend upon INET.
It uses ip_send_check() and stuff like that.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-23 20:42:11 -07:00
Grégoire Baron eb4d406545 net/sched: add ACT_CSUM action to update packets checksums
net/sched: add ACT_CSUM action to update packets checksums

ACT_CSUM can be called just after ACT_PEDIT in order to re-compute some
altered checksums in IPv4 and IPv6 packets. The following checksums are
supported by this patch:
 - IPv4: IPv4 header, ICMP, IGMP, TCP, UDP & UDPLite
 - IPv6: ICMPv6, TCP, UDP & UDPLite
It's possible to request in the same action to update different kind of
checksums, if the packets flow mix TCP, UDP and UDPLite, ...

An example of usage is done in the associated iproute2 patch.

Version 3 changes:
 - remove useless goto instructions
 - improve IPv6 hop options decoding

Version 2 changes:
 - coding style correction
 - remove useless arguments of some functions
 - use stack in tcf_csum_dump()
 - add tcf_csum_skb_nextlayer() to factor code

Signed-off-by: Gregoire Baron <baronchon@n7mm.org>
Acked-by: jamal <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-20 01:42:59 -07:00
Ben Blum 8e039d84b3 cgroups: net_cls as module
Allows the net_cls cgroup subsystem to be compiled as a module

This patch modifies net/sched/cls_cgroup.c to allow the net_cls subsystem
to be optionally compiled as a module instead of builtin.  The
cgroup_subsys struct is moved around a bit to allow the subsys_id to be
either declared as a compile-time constant by the cgroup_subsys.h include
in cgroup.h, or, if it's a module, initialized within the struct by
cgroup_load_subsys.

Signed-off-by: Ben Blum <bblum@andrew.cmu.edu>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-23 13:06:14 -07:00
Jan Luebbe d4ae20b379 net/sched: Fix module name in Kconfig
The action modules have been prefixed with 'act_', but the Kconfig
description was not changed.

Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Acked-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08 22:41:44 -08:00
Li Zefan 68ce9c0e34 cls_cgroup: clean up Kconfig
cls_cgroup can't be compiled as a module, since it's not supported by
cgroup.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 19:40:46 -08:00
Patrick McHardy 13d2a1d2b0 pkt_sched: add DRR scheduler
Add classful DRR scheduler as a more flexible replacement for SFQ.

The main difference to the algorithm described in "Efficient Fair Queueing
using Deficit Round Robin" is that this implementation doesn't drop packets
from the longest queue on overrun because its classful and limits are
handled by each individual child qdisc.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 04:10:00 -08:00
Thomas Graf f400923735 pkt_sched: Control group classifier
The classifier should cover the most common use case and will work
without any special configuration.

The principle of the classifier is to directly access the
task_struct via get_current(). In order for this to work,
classification requests from softirqs must be ignored. This is
not a problem because the vast majority of packets in softirq
context are not assigned to a task anyway. For this to work, a
mechanism is needed to trace softirq context. 

This repost goes back to the method of relying on the number of
nested bh disable calls for the sake of not adding too much
complexity and the option to come up with something more reliable
if actually needed.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-07 22:56:00 -08:00
Alexander Duyck ca9b0e27e0 pkt_action: add new action skbedit
This new action will have the ability to change the priority and/or
queue_mapping fields on an sk_buff.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-12 16:30:20 -07:00
Alexander Duyck 92651940ab pkt_sched: Add multiqueue scheduler support
This patch is intended to add a qdisc to support the new tx multiqueue
architecture by providing a band for each hardware queue.  By doing
this it is possible to support a different qdisc per physical hardware
queue.

This qdisc uses the skb->queue_mapping to select which band to place
the traffic onto.  It then uses a round robin w/ a check to see if the
subqueue is stopped to determine which band to dequeue the packet from.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-12 16:29:34 -07:00
Adrian Bunk ede16af4cd pkt_sched: Remove CONFIG_NET_SCH_RR
Commit d62733c8e4
([SCHED]: Qdisc changes and sch_rr added for multiqueue)
added a NET_SCH_RR option that was unused since the code
went unconditionally into sch_prio.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-27 19:54:05 -07:00
Patrick McHardy e5dfb81518 [NET_SCHED]: Add flow classifier
Add new "flow" classifier, which is meant to extend the SFQ hashing
capabilities without hard-coding new hash functions and also allows
deterministic mappings of keys to classes, replacing some out of tree
iptables patches like IPCLASSIFY (maps IPs to classes), IPMARK (maps
IPs to marks, with fw filters to classes), ...

Some examples:

- Classic SFQ hash:

  tc filter add ... flow hash \
  	keys src,dst,proto,proto-src,proto-dst divisor 1024

- Classic SFQ hash, but using information from conntrack to work properly in
  combination with NAT:

  tc filter add ... flow hash \
  	keys nfct-src,nfct-dst,proto,nfct-proto-src,nfct-proto-dst divisor 1024

- Map destination IPs of 192.168.0.0/24 to classids 1-257:

  tc filter add ... flow map \
  	key dst addend -192.168.0.0 divisor 256

- alternatively:

  tc filter add ... flow map \
  	key dst and 0xff

- similar, but reverse ordered:

  tc filter add ... flow map \
  	key dst and 0xff xor 0xff

Perturbation is currently not supported because we can't reliable kill the
timer on destruction.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:28:36 -08:00
Patrick McHardy 72eb7bd269 [NET_SCHED]: sch_ingress: remove netfilter support
Since the old policer code is gone, TC actions are needed for policing.
The ingress qdisc can get packets directly from netif_receive_skb()
in case TC actions are enabled or through netfilter otherwise, but
since without TC actions there is no policer the only thing it actually
does is count packets.

Remove the netfilter support and always require TC actions.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:28:25 -08:00
Patrick McHardy 13a0a096e5 [NET_SCHED]: kill obsolete NET_CLS_POLICE option
The code is already gone for about half a year, the config option
has been kept around to select the replacement options for easier
upgrades. This seems long enough, people upgrading from older
kernels will have to reconfigure a lot anyway.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:08:37 -08:00
Patrick McHardy 645a1e39e4 [NET_SCHED]: sch_ingress: move dependencies to Kconfig
Instead of complaining at scheduler initialization time, check the
dependencies in Kconfig.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:08:21 -08:00
Patrick McHardy be0ea7d5da [NETFILTER]: Convert old checksum helper names
Kill the defines again, convert to the new checksum helper names and
remove the dependency of NET_ACT_NAT on NETFILTER.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:55:15 -08:00
Randy Dunlap 85ef3e5cad [NET]: QoS/Sched as menuconfig
Convert "QoS and/or fair queueing" to menuconfig.
This makes it easy for someone to disable all sub-options with
one config symbol.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-18 21:56:38 -07:00
Herbert Xu b421995235 [PKT_SCHED]: Add stateless NAT
Stateless NAT is useful in controlled environments where restrictions are
placed on through traffic such that we don't need connection tracking to
correctly NAT protocol-specific data.

In particular, this is of interest when the number of flows or the number
of addresses being NATed is large, or if connection tracking information
has to be replicated and where it is not practical to do so.

Previously we had stateless NAT functionality which was integrated into
the IPv4 routing subsystem.  This was a great solution as long as the NAT
worked on a subnet to subnet basis such that the number of NAT rules was
relatively small.  The reason is that for SNAT the routing based system
had to perform a linear scan through the rules.

If the number of rules is large then major renovations would have take
place in the routing subsystem to make this practical.

For the time being, the least intrusive way of achieving this is to use
the u32 classifier written by Alexey Kuznetsov along with the actions
infrastructure implemented by Jamal Hadi Salim.

The following patch is an attempt at this problem by creating a new nat
action that can be invoked from u32 hash tables which would allow large
number of stateless NAT rules that can be used/updated in constant time.

The actual NAT code is mostly based on the previous stateless NAT code
written by Alexey.  In future we might be able to utilise the protocol
NAT code from netfilter to improve support for other protocols.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:53:11 -07:00
Gabriel Craciunescu 99acaeb92f [PKT_SCHED]: Some typo fixes in net/sched/Kconfig
Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18 02:00:04 -07:00
Patrick McHardy c3bc7cff8f [NET_SCHED]: Kill CONFIG_NET_CLS_POLICE
The NET_CLS_ACT option is now a full replacement for NET_CLS_POLICE,
remove the old code. The config option will be kept around to select
the equivalent NET_CLS_ACT options for a short time to allow easier
upgrades.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-15 00:03:05 -07:00
Patrick McHardy 876d48aabf [NET_SCHED]: Remove CONFIG_NET_ESTIMATOR option
The generic estimator is always built in anways and all the config options
does is prevent including a minimal amount of code for setting it up.
Additionally the option is already automatically selected for most cases.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:16:37 -07:00
Peter P Waskiewicz Jr d62733c8e4 [SCHED]: Qdisc changes and sch_rr added for multiqueue
Add the new sch_rr qdisc for multiqueue network device support.  Allow
sch_prio and sch_rr to be compiled with or without multiqueue hardware
support.

sch_rr is part of sch_prio, and is referenced from MODULE_ALIAS.  This
was done since sch_prio and sch_rr only differ in their dequeue
routine.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:16:22 -07:00
Patrick McHardy 641b9e0e8b [NET_SCHED]: Use ktime as clocksource
Get rid of the manual clock source selection mess and use ktime. Also
use a scalar representation, which allows to clean up pkt_sched.h a bit
more and results in less ktime_to_ns() calls in most cases.

The PSCHED_US2JIFFIE/PSCHED_JIFFIE2US macros are implemented quite
inefficient by this patch, following patches will convert all qdiscs
to hrtimers and get rid of them entirely.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:26:04 -07:00
David Kimdon 3c62f75aac [PKT_SCHED]: Make sch_fifo.o available when CONFIG_NET_SCHED is not set.
Based on patch by Patrick McHardy.

Add a new option, NET_SCH_FIFO, which provides a simple fifo qdisc
without requiring CONFIG_NET_SCHED.

The d80211 stack needs a generic fifo qdisc for WME.  At present it
uses net/d80211/fifo_qdisc.c which is functionally equivalent to
sch_fifo.c.  This patch will allow the d80211 stack to remove
net/d80211/fifo_qdisc.c and use sch_fifo.c instead.

Signed-off-by: David Kimdon <david.kimdon@devicescape.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:21:43 -08:00
Thomas Graf 82e91ffef6 [NET]: Turn nfmark into generic mark
nfmark is being used in various subsystems and has become
the defacto mark field for all kinds of packets. Therefore
it makes sense to rename it to `mark' and remove the
dependency on CONFIG_NETFILTER.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:21:38 -08:00
Matt LaPlante 3539c272f1 Kconfig: Typos in net/sched/Kconfig
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 18:53:46 +02:00
Adrian Bunk afb5bb5744 [PKT_SCHED]: Let NET_CLS_ACT no longer depend on EXPERIMENTAL
This option should IMHO no longer depend on EXPERIMENTAL.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
ACKed-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:44:24 -08:00
Patrick McHardy dca80b962a [PKT_SCHED]: Change default clock source to gettimeofday
The default of using jiffies is very bad and results in
underutilization except with very low bandwidth.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 14:36:55 -08:00
Adrian Bunk bb7e8c5a55 [PKT_SCHED] net/sched/Kconfig: fix typo in NET_EMATCH_META description
Noted by Matt LaPlante <webmaster@cyberdogtech.com>.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-11 16:40:30 -08:00
Roman Zippel 05b8b0fafd [NET]: Sanitize NET_SCHED protection in /net/sched/Kconfig
On Thu, 17 Nov 2005, David Gómez wrote:

> I found out that if i select NET_CLS_ROUTE4, save my changes and exit
> menuconfig, execute again make menuconfig and go to QoS options, then the new
> available options are visible. So menuconfig has some problem refreshing
> contents :?

No, they were there before too, but you have to go up one level to see 
them.

It's better in 2.6.15-rc1-git5, but the menu structure is still a little 
messed up, the patch below properly indents all menu entries.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-17 15:22:39 -08:00
Thomas Graf 52ab4ac258 [PKT_SCHED]: Rework QoS and/or fair queueing configuration
Make "QoS and/or fair queueing" have its own menu, it's too big to be
inlined into "Network options". Remove the obsolete NET_QOS option.
Automatically select NET_CLS if needed. Do the same for NET_ESTIMATOR
but allow it to be selected manually for statistical purposes. Add
comments to separate queueing from classification. Fix dependencies
and ordering of classifiers. Improve descriptions/help texts and
remove outdated pieces.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-03 02:29:06 -02:00
Andi Kleen 34cb711ba9 [NET]: Disable NET_SCH_CLK_CPU for SMP x86 hosts
Opterons with frequency scaling have fully unsynchronized TSCs
running at different frequencies, so using TSCs there is not a good idea. 
Also some other x86 boxes have this problem. gettimeofday should be good 
enough, so just disable it.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-13 14:41:44 -07:00
David S. Miller 29cb9f9c55 [LIB]: Make TEXTSEARCH_BM plain tristate like the others
And select it when the relevant modules are enabled.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 16:11:11 -07:00
Sam Ravnborg 6a2e9b738c [NET]: move config options out to individual protocols
Move the protocol specific config options out to the specific protocols.
With this change net/Kconfig now starts to become readable and serve as a
good basis for further re-structuring.

The menu structure is left almost intact, except that indention is
fixed in most cases. Most visible are the INET changes where several
"depends on INET" are replaced with a single ifdef INET / endif pair.

Several new files were created to accomplish this change - they are
small but serve the purpose that config options are now distributed
out where they belongs.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 21:13:56 -07:00
David S. Miller f7704347a7 [PKT_SCHED]: Make TEXTSEARCH* options only selected.
Do not present these confusing new options to the user
unless he picked some facility that makes use of it,
such as NET_EMATCH_TEXT.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-24 17:39:03 -07:00
David S. Miller f2d368fa3e [PKT_SCHED]: Make NET_EMATCH_TEXT select TEXTSEARCh
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 23:55:41 -07:00