Commit Graph

72 Commits

Author SHA1 Message Date
Amit Shah 65745422a8 virtio: console: Prevent userspace from submitting NULL buffers
A userspace could submit a buffer with 0 length to be written to the
host.  Prevent such a situation.

This was not needed previously, but recent changes in the way write()
works exposed this condition to trigger a virtqueue event to the host,
causing a NULL buffer to be sent across.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CC: stable@kernel.org
2010-09-21 10:54:01 +09:30
Hans de Goede 6df7aadcd9 virtio: console: Fix poll blocking even though there is data to read
I found this while working on a Linux agent for spice, the symptom I was
seeing was select blocking on the spice vdagent virtio serial port even
though there were messages queued up there.

virtio_console's port_fops_poll checks port->inbuf != NULL to determine
if read won't block. However if an application reads enough bytes from
inbuf through port_fops_read, to empty the current port->inbuf,
port->inbuf will be NULL even though there may be buffers left in the
virtqueue.

This causes poll() to block even though there is data to be read,
this patch fixes this by using will_read_block(port) instead of the
port->inbuf != NULL check.

Signed-off-By: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
2010-09-21 10:54:01 +09:30
Amit Shah 60e5e0b840 virtio: console: Fix crash when port is unplugged and blocked for write
When a program that has a virtio port opened and blocked for a write
operation, a port hot-unplug event will later led to a crash when
SIGTERM was sent to the program. Fix that.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-06-03 22:39:19 +09:30
Amit Shah 0047634d3d virtio: console: Fix crash when hot-unplugging a port and read is blocked
When removing a port we don't check if a program was blocked for read.
This leads to a crash when SIGTERM is sent to the program after
hot-unplugging the port.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-06-03 22:39:18 +09:30
Julia Lawall 0643e4c6e4 drivers/char: Eliminate use after free
In each case, the first argument to send_control_msg or __send_control_msg,
respectively, has either not been successfully allocated or has been freed
at the point of the call.  In the first case, the first argument, port, is
only used to access the portdev and id fields, in order to call
__send_control_msg.  Thus it seems possible instead to call
__send_control_msg directly.  In the second case, the call to
__send_control_msg is moved up to a place where it seems like the first
argument, portdev, has been initialized sufficiently to make the call to
__send_control_msg meaningful.

This has only been compile tested.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@free@
expression E;
position p;
@@
kfree@p(E)

@@
expression free.E, subE<=free.E, E1;
position free.p;
@@

  kfree@p(E)
  ...
(
  subE = E1
|
* E
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:51 +09:30
Amit Shah 8345adbf96 virtio: console: Accept console size along with resize control message
The VIRTIO_CONSOLE_RESIZE control message sent to us by the host now
contains the new {rows, cols} values for the console. This ensures each
console port gets its own size, and we don't depend on the config-space
rows and cols values at all now.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: linuxppc-dev@ozlabs.org
CC: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:51 +09:30
Amit Shah 9778829cff virtio: console: Store each console's size in the console structure
With support for multiple consoles, just using one {rows,cols} pair in
the config space is not going to suffice.

Store each console's size as part of the console struct.

This changes the behaviour for one case when multiport is not enabled:
when notifier_add_vio() is called, the console size is taken from that
of the last config-space update instead of fetching it afresh from the
config space.

Also add a helper to update the size in the console struct as we'll need
to use the same code to update the size via control messages when
multiport support is enabled.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: linuxppc-dev@ozlabs.org
CC: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:51 +09:30
Amit Shah 4038f5b767 virtio: console: Resize console port 0 on config intr only if multiport is off
When using multiport, we'll use control messages. Ensure we don't
accidentally update port 0 size on config interrupts.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: linuxppc-dev@ozlabs.org
CC: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:50 +09:30
Amit Shah cdfadfc1ad virtio: console: Add support for nonblocking write()s
If the host port is not open, a write() should either just return if the
file is opened in non-blocking mode, or block till the host port is
opened.

Also, don't spin till host consumes data for nonblocking ports. For
non-blocking ports, we can do away with the spinning and reclaim the
buffers consumed by the host on the next write call or on the condition
that'll make poll return.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:50 +09:30
Amit Shah 60caacd3ee virtio: console: Rename wait_is_over() to will_read_block()
We'll introduce a function that checks if write will block.  Have
function names that are similar for the two cases.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:50 +09:30
Amit Shah 1d05160be7 virtio: console: Don't always create a port 0 if using multiport
If we're using multiport, there's no point in always creating a console
port. Create the console port only if the host doesn't support
multiport.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:49 +09:30
Amit Shah f909f850d6 virtio: console: Use a control message to add ports
Instead of the host and guest independently enumerating ports, switch to
a control message to add ports where the host supplies the port number
so there's no ambiguity or a possibility of a race between the host and
the guest port numbers.

We now no longer need the 'nr_ports' config value. Since no kernel has
been released with the MULTIPORT changes yet, we have a chance to fiddle
with the config space without adding compatibility features.

This is beneficial for management software, which would now be able to
instantiate ports at known locations and avoid problems that arise with
implicit numbering in the host and the guest. This removes the 'guessing
game' part of it, and management software can now actually indicate
which id to spawn a particular port on.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:49 +09:30
Amit Shah c446f8fcc9 virtio: console: Move code around for future patches
We're going to use add_port() from handle_control_message() in the next
patch.

Move the add_port() and fill_queue(), which depends on it, above
handle_control_message() to avoid forward declarations.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:48 +09:30
Amit Shah 99f905f88a virtio: console: Remove config work handler
We're going to switch to using control messages for port hot-plug and
initial port discovery. Remove the config work handler which handled
port hot-plug so far.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:48 +09:30
Amit Shah 69eb9a9f69 virtio: console: Don't call hvc_remove() on unplugging console ports
hvc_remove() has some bug which freezes other active hvc ports when one
port is removed.

So disable calling of hvc_remove() which deregisters a port with the
hvc_console.

If the hvc_console code calls into our get_chars() routine as a result
of a poll operation, we will return -EPIPE and the hvc_console code will
then do the necessary cleanup.

This call will be restored when the bug in hvc_remove() is found and
fixed.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:48 +09:30
Amit Shah 6dc69f9702 virtio: console: Return -EPIPE to hvc_console if we lost the connection
hvc_console handles -EPIPE properly when the connection to the host is
lost.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:47 +09:30
Amit Shah eaeff9608a virtio: console: Let host know of port or device add failures
The host may want to know and let management apps notify of port or
device add failures. Send a control message saying the device or port is
not ready in this case.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:47 +09:30
Amit Shah 3425e706bf virtio: console: Add a __send_control_msg() that can send messages without a valid port
We will introduce control messages that operate on the device as a whole
rather than just ports. Make send_control_msg() a wrapper around
__send_control_msg() which does not need a valid port.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:46 +09:30
Amit Shah b99fa815d7 virtio: Revert "virtio: disable multiport console support."
This reverts commit b7a413015d.

Multiport support was disabled for 2.6.34 because we wanted to introduce
a new ABI and since we didn't have any released kernel with the older
ABI and were out of the merge window, it didn't make sense keeping the
older ABI around.

Now we revert the patch disabling multiport and rework the ABI in the
following patches.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:46 +09:30
Michael S. Tsirkin 505b0451c4 virtio_console: use virtqueue_xxx wrappers
Switch virtio_console to new virtqueue_xxx wrappers.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19 22:15:42 +09:30
Michael S. Tsirkin b7a413015d virtio: disable multiport console support.
Move MULTIPORT feature and related config changes
out of exported headers, and disable the feature
at runtime.

At this point, it seems less risky to keep code around
until we can enable it than rip it out completely.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-04-08 09:46:19 +09:30
Rusty Russell 9ff4cfab82 virtio: console makes incorrect assumption about virtio API
The get_buf() API sets the second arg to the number of bytes *written*
by the other side; in this case it should be zero as these are output buffers.

lguest gets this right (obviously kvm's console doesn't), resulting in
continual buildup of console writes.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Amit Shah <amit.shah@redhat.com>
2010-04-08 09:46:17 +09:30
François Diakhaté 162a689a13 virtio: console: Fix early_put_chars usage
Currently early_put_chars is not used by virtio_console because it can
only be used once a port has been found, at which point it's too late
because it is no longer needed. This patch should fix it.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-04-08 09:46:15 +09:30
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Amit Shah 2de16a493c virtio: console: Check if port is valid in resize_console
The console port could have been hot-unplugged. Check if it is valid
before working on it.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-03-22 14:24:55 +02:00
Amit Shah ec64213c4d virtio: console: Generate a kobject CHANGE event on adding 'name' attribute
When the host lets us know what 'name' a port is assigned, we create the
sysfs 'name' attribute. Generate a 'change' event after this so that
udev wakes up and acts on the rules for virtio-ports (currently there's
only one rule that creates a symlink from the 'name' to the actual char
device).

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-03-22 14:24:53 +02:00
Amit Shah 335a64a5c2 virtio: console: Use better variable names for fill_queue operation
We want to keep track of the number of buffers added to a vq. Use
nr_added_bufs instead of 'ret'.

Also, the users of fill_queue() overloaded a local 'err' variable to
check the numbers of buffers allocated. Use nr_added_bufs instead of
err.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: Juan Quintela <quintela@redhat.com>
2010-03-04 13:40:39 +05:30
Amit Shah 604b2ad7cc virtio: console: Fix type of 'len' as unsigned int
We declare 'len' as int type but it should be 'unsigned int', as
get_buf() wants it to be.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: Juan Quintela <quintela@redhat.com>
2010-03-04 13:40:33 +05:30
Amit Shah d693356192 virtio: console: Fill ports' entire in_vq with buffers
Instead of allocating just one buffer for a port's in_vq, fill
the entire in_vq with buffers so the host need not stall while
an application consumes the data and makes the buffer available
again for the host.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:23:06 +10:30
Amit Shah 22a29eacd2 virtio: console: Error out if we can't allocate buffers for control queue
With MULTIPORT support, the control queue is an integral part of the
functioning of the device. If we can't get any buffers allocated, the
host won't be able to relay important information and the device may not
function as intended.

Ensure 'probe' doesn't succeed until the control queue has at least one
buffer allocated for its ivq.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:23:04 +10:30
Amit Shah 7177876fea virtio: console: Add ability to remove module
Add the ability to remove the virtio_console module.

This aids debugging.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:23:04 +10:30
Amit Shah a9cdd48557 virtio: console: Ensure no memleaks in case of unused buffers
If unused data exists in in_vq, ensure we flush that first and then
detach unused buffers, which will ensure all buffers from the in_vq are
removed.

Also ensure we free the buffers after detaching them.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:23:03 +10:30
Amit Shah 298add723a virtio: console: show error message if hvc_alloc fails for console ports
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:23:02 +10:30
Amit Shah d99393effd virtio: console: Add debugfs files for each port to expose debug info
This is helpful in examining ports' state.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:23:01 +10:30
Amit Shah 1f7aa42d16 virtio: console: Add ability to hot-unplug ports
Remove port data; deregister from the hvc core if it's a console port.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:23:00 +10:30
Amit Shah 7f5d810dac virtio: console: Handle port hot-plug
If the 'nr_ports' variable in the config space is updated to a higher
value, that means new ports have been hotplugged.

Introduce a new workqueue to handle such updates and create new ports.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:22:58 +10:30
Amit Shah 88f251ac58 virtio: console: Remove cached data on port close
Remove any data that we might have in a port's inbuf when closing a port
or when any data is received when a port is closed.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:22:57 +10:30
Amit Shah 431edb8a8b virtio: console: Register with sysfs and create a 'name' attribute for ports
The host can set a name for ports so that they're easily discoverable
instead of going by the /dev/vportNpn naming. This attribute will be
placed in /sys/class/virtio-ports/vportNpn/name. udev scripts can then
create symlinks to the port using the name.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:22:56 +10:30
Amit Shah 3c7969ccb5 virtio: console: Ensure only one process can have a port open at a time
Add a guest_connected field that ensures only one process
can have a port open at a time.

This also ensures we don't have a race when we later add support for
dropping buffers when closing the char dev and buffer caching is turned
off for the particular port.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:22:55 +10:30
Amit Shah 2030fa496d virtio: console: Add file operations to ports for open/read/write/poll
Allow guest userspace applications to open, read from, write to, poll
the ports via the char dev interface.

When a port gets opened, a notification is sent to the host via a
control message indicating a connection has been established. Similarly,
on closing of the port, a notification is sent indicating disconnection.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:22:54 +10:30
Amit Shah fb08bd274d virtio: console: Associate each port with a char device
The char device will be used as an interface by applications on the
guest to communicate with apps on the host.

The devices created are placed in /dev/vportNpn where N is the
virtio-console device number and n is the port number for that device.

One dynamic major device number is allocated for each device and minor
numbers are allocated for the ports contained within that device.

The file operation for the char devs will be added in the following
commits.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:22:53 +10:30
Amit Shah b766ceed5b virtio: console: Prepare for writing to userspace buffers
When ports get advertised as char devices, the buffers will come from
userspace. Equip the fill_readbuf function with the ability to write
to userspace buffers.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:22:53 +10:30
Amit Shah 17634ba255 virtio: console: Add a new MULTIPORT feature, support for generic ports
This commit adds a new feature, MULTIPORT. If the host supports this
feature as well, the config space has the number of ports defined for
that device. New ports are spawned according to this information.

The config space also has the maximum number of ports that can be
spawned for a particular device. This is useful in initializing the
appropriate number of virtqueues in advance, as ports might be
hot-plugged in later.

Using this feature, generic ports can be created which are not tied to
hvc consoles.

We also open up a private channel between the host and the guest via
which some "control" messages are exchanged for the ports, like whether
the port being spawned is a console port, resizing the console window,
etc.

Next commits will add support for hotplugging and presenting char
devices in /dev/ for bi-directional guest-host communication.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:22:52 +10:30
Amit Shah f997f00bf8 virtio: console: Introduce a send_buf function for a common path for sending data to host
Adding support for generic ports that will write to userspace will need
some code changes.

Consolidate the write routine into send_buf() and put_chars() now just
calls into the new function.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:22:51 +10:30
Amit Shah 203baab8ba virtio: console: Introduce function to hand off data from host to readers
In preparation for serving data to userspace (generic ports) as well as
in-kernel users (hvc consoles), separate out the functionality common to
both in a 'fill_readbuf()' function.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:22:50 +10:30
Amit Shah 2658a79acf virtio: console: Separate out find_vqs operation into a different function
With support for multiple ports, each port will have its own input and
output vqs. Prepare the probe function for this change.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:22:49 +10:30
Amit Shah cfa6d37925 virtio: console: Separate out console init into a new function
Console ports could be hot-added. Also, with the new multiport support,
a port is identified as a console port only if the host sends a control
message.

Move the console port init into a separate function so it can be invoked
from other places.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:22:48 +10:30
Amit Shah 4f23c573c0 virtio: console: Separate out console-specific data into a separate struct
Move out console-specific stuff into a separate struct from 'struct
port' as we need to maintain two lists: one for all the ports (which
includes consoles) and one only for consoles since the hvc callbacks
only give us the vtermno.

This makes console handling cleaner.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:22:47 +10:30
Amit Shah cb06e3676b virtio: console: ensure console size is updated on hvc open
When multiple console support is added, ensure each port's size gets
updated when a new one is opened via hvc.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:22:45 +10:30
Amit Shah 1c85bf3544 virtio: console: struct ports for multiple ports per device.
Rather than assume a single port, add a 'struct ports_device' which
stores data related to all the ports for that device.

Currently, there's only one port and is hooked up with hvc, but that
will change.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-02-24 14:22:43 +10:30