Commit Graph

516 Commits

Author SHA1 Message Date
Chanwoo Choi 15dec834a0 Merge remote-tracking branch 'origin/ib-extcon-mfd-4.14' into extcon-next 2017-07-17 19:26:30 +09:00
Benson Leung c698316661 extcon: cros-ec: Add extcon-cros-ec driver to support display out
This is the driver for the USB Type C cable detection mechanism
built into the ChromeOS Embedded Controller on systems that
have USB Type-C ports.

At present, this allows for the presence of display out, but in
future, it may also be used to notify host and device type cables
and the presence of power.

Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Chanwoo Choi <cw00.chio@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-07-17 19:25:49 +09:00
Arvind Yadav ff890bc008 extcon: int3496: Constify acpi_device_id
acpi_device_id are not supposed to change at runtime. All functions
working with acpi_device_id provided by <acpi/acpi_bus.h> work with
const acpi_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   1733	    352	      0	   2085	    825 drivers/extcon/extcon-intel-int3496.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   1797	    272	      0	   2069	    815 drivers/extcon/extcon-intel-int3496.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-07-16 15:09:30 +09:00
Andy Shevchenko 1f4be24786 extcon: int3496: Switch to devm_acpi_dev_add_driver_gpios()
Switch to use managed variant of acpi_dev_add_driver_gpios() to simplify
error path and fix potentially wrong assingment if ->probe() fails.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-06-12 10:00:24 +09:00
Peter Robinson a781a7d646 extcon: qcom-spmi-misc: add dependency on ARCH_QCOM
Depend on the architecture the device actuall is in, also add
dep on the compile test to ensure continued coverage.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-05-23 18:35:42 +09:00
Markus Elfring cf5459a9e2 extcon: arizona: Use devm_kcalloc() in arizona_extcon_get_micd_configs()
* A multiplication for the size determination of a memory allocation
  indicated that an array data structure should be processed.
  Thus use the corresponding function "devm_kcalloc".

* Replace the specification of a data structure by a pointer dereference
  to make the corresponding size determination a bit safer according to
  the Linux coding style convention.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-05-23 18:32:03 +09:00
Markus Elfring 826a47e978 extcon: Fix a typo in three comment lines
Adjust three words in this description for a function.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-05-23 18:32:02 +09:00
Markus Elfring 3f5071a8b0 extcon: Use devm_kcalloc() in extcon_dev_register()
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "devm_kcalloc".

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-05-23 18:32:02 +09:00
Chanwoo Choi 70641a0a84 extcon: Use BIT() macro for the left-shift operation
This patch just uses the BIT() macro to make the code simple.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 11:12:45 +09:00
Hans de Goede c42a880c31 extcon: intel-cht-wc: Ignore failure to detect charger-type on host mode exit
When we leave host-mode because the id-pin is no longer connected to
ground, the 5v boost converter is normally still on, so we will see
Vbus, but it is not from a charger (normally) so the charger-type
detection will fail.

This commit silences the cht_wc_extcon_get_charger() false-positive
errors when we're leaving host mode.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:26 +09:00
Hans de Goede 585cb239f4 extcon: intel-cht-wc: Disable external 5v boost converter on probe
Disable the 5v boost converter on probe in case it was left on by
the BIOS, this fixes 2 problems:

1) This gets seen by the external battery charger as a valid Vbus
   supply and it then tries to feed Vsys from this creating a
   feedback loop which causes aprox. 300 mA extra battery drain
   (and unless we drive the external-charger-disable pin high it
   also tries to charge the battery causing even more feedback).
2) This gets seen by the pwrsrc block as a SDP USB Vbus supply

Since the external battery charger has its own 5v boost converter
which does not have these issues, we simply turn the separate
external 5v boost converter off and leave it off entirely.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:25 +09:00
Chanwoo Choi c9d0f1d121 extcon: Remove porting compatibility of swich class
This patch removes the porting compatibility for switch class
because there is no any usage and requirement of swich class
over a couple of years.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:24 +09:00
Hans de Goede db0f3baaa3 extcon: intel-cht-wc: Add Intel Cherry Trail Whiskey Cove PMIC extcon driver
Add a driver for charger detection / control on the Intel Cherrytrail
Whiskey Cove PMIC.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:23 +09:00
Roger Quadros 01944321de extcon: palmas: Don't miss GPIO events during suspend/resume
The USB cable state can change during suspend/resume
so be sure to check and update the extcon state.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:22 +09:00
Roger Quadros 8680b4d193 extcon: usb-gpio: Don't miss event during suspend/resume
We must check for ID/VBUS changes during resume irrespective
of whether our device wakeup is enabled or not.

Without this we seem to be missing ID/VBUS events after
system suspend/resume.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:21 +09:00
Peter Chen 98fd079297 extcon: usb-gpio: Do not enable USB as wakeup source by default
Whether the USB port as a wakeup source should be determined by user,
but not enabled by default.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:20 +09:00
Charles Keepax e57bb43c7e extcon: arizona: Wait for any running HPDETs to complete on jack removal
As the HPDET can't be aborted mid way through we should not allow any new
insertion to be processed until the previous HPDET has finished. It is very
unlikely but with low enough debounce settings you could start a new HPDET
before the old one has completed, which results in an erroneous reading.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-04-06 10:55:19 +09:00
Chanwoo Choi bc9a5c37a5 Merge branch 'ib-extcon-4.12' into HEAD 2017-04-06 10:54:36 +09:00
Chanwoo Choi 815429b39d extcon: Add new extcon_register_notifier_all() to monitor all external connectors
The extcon core already provides the extcon_register_notifier() function
in order to register the notifier block which is used to monitor
the state change for the specific external connector such as EXTCON_USB,
EXTCON_USB_HOST and so on. The extcon consumer uses the this function.

The extcon consumer might need to monitor the all supported external
connectors from the extcon device. In this case, The extcon consumer
should have each notifier_block structure for each external connector.

This patch adds the new extcon_register_notifier_all() function
that extcon consumer is able to monitor the state change of all
supported external connectors by using only one notifier_block structure.

- List of new added functions:
int extcon_register_notifier_all(struct extcon_dev *edev,
			struct notifier_block *nb);
int extcon_unregister_notifier_all(struct extcon_dev *edev,
			struct notifier_block *nb);
int devm_extcon_register_notifier_all(struct device *dev,
			struct extcon_dev *edev, struct notifier_block *nb);
void devm_extcon_unregister_notifier_all(struct device *dev,
			struct extcon_dev *edev, struct notifier_block *nb);

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2017-04-04 11:22:42 +09:00
Andy Shevchenko 366380cd62 Revert "extcon: usb-gpio: add support for ACPI gpio interface"
The commit 942c7924a5 introduced a check for ACPI handle for the
device that never appears on any ACPI-enabled platform so far. It seems
a confusion with extcon-intel-int3496 which does support ACPI-enabled
platforms.

Revert commit 942c7924a5 to avoid any confusion in the future.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-27 13:17:41 +09:00
Hans de Goede 70216fd937 extcon: int3496: Set the id pin to direction-input if necessary
With the new more strict ACPI gpio code the dsdt's IoRestriction
flags are honored on gpiod_get, but in some dsdt's it is wrong,
so explicitly call gpiod_direction_input on the id gpio if
necessary.

This fixes the following errors when the int3496 code is used
together with the new more strict ACPI gpio code:

[ 2382.484415] gpio gpiochip1: (INT33FF:01): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[ 2382.484425] gpio gpiochip1: (INT33FF:01): unable to lock HW IRQ 3 for IRQ
[ 2382.484429] genirq: Failed to request resources for INT3496:00 (irq 174) on irqchip chv-gpio
[ 2382.484518] intel-int3496 INT3496:00: can't request IRQ for USB ID GPIO: -22
[ 2382.500359] intel-int3496: probe of INT3496:00 failed with error -22

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-22 18:29:48 +09:00
Hans de Goede 408c5b41d2 extcon: int3496: Use gpiod_get instead of gpiod_get_index
Now that we've an acpi mapping table we should be using gpiod_get
instead of gpiod_get_index.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-22 18:29:47 +09:00
Peter Robinson 059c7874b8 extcon: int3496: Add dependency on X86 as it's Intel specific
Add dependency on X86 so it doesn't show up on other arches and
add a option for compile test so it still gets build coverage.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-22 18:29:46 +09:00
Andy Shevchenko 8cb2cbae45 extcon: int3496: Add GPIO ACPI mapping table
In order to make GPIO ACPI library stricter prepare users of
gpiod_get_index() to correctly behave when there no mapping is
provided by firmware.

Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-22 18:29:46 +09:00
Andy Shevchenko 90400c5884 extcon: int3496: Rename GPIO pins in accordance with binding
Update GPIO pin names in extcon-intel-int3496.c driver to follow
the existing extcon binding.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-22 18:29:45 +09:00
Andy Shevchenko bafa687dcc extcon: int3496: Propagate error code of gpiod_to_irq()
gpiod_to_irq() doesn't return 0. Thus, we just adjust condition and
replace -EINVAL by actual error code it returns.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-13 12:39:30 +09:00
Masahiro Yamada c6efb58db4 scripts/spelling.txt: add "swithc" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  swithc||switch
  swithced||switched
  swithcing||switching

Link: http://lkml.kernel.org/r/1481573103-11329-3-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:46 -08:00
Roger Quadros 567ab5a81b extcon: palmas: Use dev_dbg macro for the debug messages
User is not interested in USB cable events appearing on the
console. Use dev_dbg() instead of dev_info() for these events.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-25 15:03:54 +09:00
Chanwoo Choi 86d6cda68f extcon: Modify the name of EXTCON_USB_HOST connector
This patch renames the EXTCON_USB_HOST by using '-' char because
the name of all external connector use the '-' char instead of '_' char.
- "USB_HOST" -> "USB-HOST"

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:58 +09:00
Chanwoo Choi 3c5f0e0768 extcon: Add new EXTCON_CHG_USB_PD type for USB Power Delivery
This patch adds the new EXTCON_CHG_USB_PD for USB PD (Power Delivery)[1].
The USB Power Delivery specification specifies that USB cable provides
the increased power more than 7.5W to device with larger power demand.
The EXTCON_CHG_USB_PD has the EXTCON_TYPE_CHG and EXTCON_TYPE_USB type.

[1] https://en.wikipedia.org/wiki/USB#PD

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:58 +09:00
Peter Chen bcb7440e76 extcon: usb-gpio: Add pinctrl operation during system PM
At some systems, the pinctrl setting will be lost or needs to
set as "sleep" state to save power consumption. So, we need to
configure pinctrl as "sleep" state when system enters suspend,
and as "default" state after system resumes. In this way, the
pinctrl value can be recovered as "default" state after resuming.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:12 +09:00
Chanwoo Choi e6cf046543 extcon: Move defintion of struct extcon_dev to driver/extcon directory
This patch moves the 'struct extcon_dev' of extcon subsystem
to driver/extcon/extcon.h header file because the struct extcon_dev have to
be handled by extcon API to guarantee the consistency of strcut extcon_dev.
If external drivers are able to touch the struct extcon_dev directly, it might
cause the critical and unknown problem.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:11 +09:00
Chanwoo Choi 6e3a7e89ff extcon: adc-jack: Use the internal data instead of using struct extcon_dev
This patch uses the internal dev instance instead of using the field of struct
extcon_dev because the core structure (extcon_dev) of extcon have to be touched
by only extcon core driver.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:11 +09:00
David Cohen 2f556bdb9f extcon: int3496: Add Intel INT3496 ACPI device extcon driver
Add an extcon driver for USB OTG ports controlled by an Intel INT3496
ACPI device (e.g. Baytrail, Cherrytrail devices).

Signed-off-by: David Cohen <david.a.cohen@intel.com>
[hdgoede@redhat.com: Port to current kernel, cleanup, submit upstream]
[hdgoede@redhat.com: Add Documentation/extcon/intel-int3496.txt]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:11 +09:00
Baolin Wang 5298b83658 extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set
According to the documentation, we should set the EXTCON_USB when
one SDP charger connector was reported.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:11 +09:00
Chanwoo Choi 01b4c9a1ae extcon: Remove potential problem when calling extcon_register_notifier()
This patch removes the potential problem of extcon_register_notifier()
when edev parameter is NULL. When edev is NULL, this function returns
the first extcon device which includes the sepecific external connector
of second paramter. But, it don't guarantee the same operation in all cases.
To remove this confusion and potential problem, this patch fixes it.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:11 +09:00
Hans de Goede dd3a55fc68 extcon: axp288: Fix the module not auto-loading
Add a MODULE_DEVICE_TABLE to fix the module not auto-loading.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:10 +09:00
Hans de Goede be1749528e extcon: axp288: Remove unnecessary irq?_en register writes
Setting the irq_enable bits is taken care of by the irq chip when we
request the irqs and the driver should not be meddling with the
irq?_en registers itself.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:10 +09:00
Hans de Goede 5757aca101 extcon: axp288: Use vbus-valid instead of -present to determine cable presence
The vbus-present bit in the power status register also gets set to 1
when a usb-host cable (id-pin shorted to ground) is plugged in and a 5v
boost converter is supplying 5v to the otg usb bus.

This causes a "disconnect or unknown or ID event" warning in dmesg as
well as the extcon device to report the last detected charger cable
type as being connected even though none is connected.

This commit switches to checking the vbus-valid bit instead, which is
only 1 when both vbus is present and the vbus-path is enabled in the
vbus-path control register (the vbus-path gets disabled when a usb-host
cable is detected, to avoid the pmic drawing power from the 5v boost
converter).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:10 +09:00
Hans de Goede 5d2199ea34 extcon: axp288: Fix possibly reporting 2 cables in state true
When the charger type changes from e.g. SDP to CDP, without Vbus being
seen as low in between axp288_handle_chrg_det_event would set the state
for the new cable type to true, without clearing the state of the
previous cable type to false.

This commit fixes this and also gets rid of the function local static
cable variable, properly storing all drv state in the axp288_extcon_info
struct.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:10 +09:00
Hans de Goede 3fe1e0e2ab extcon: axp288: Simplify axp288_handle_chrg_det_event
axp288_handle_chrg_det_event only gets called on change interrupts
(so not that often), extcon_set_state_sync() checks itself if there are
any actual changes before notifying listeners, and gpiod_set_value is
not really expensive either.

So we can simply always do both on each interrupt removing a bunch of
somewhat magic looking code from axp288_handle_chrg_det_event.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:10 +09:00
Hans de Goede 1490d157e0 extcon: axp288: Remove usb_phy notification code
The usb_phy based intel-usb-phy code never got merged into the
mainline kernel, so the devm_usb_get_phy() call will always fail,
blocking the driver from loading.

Since new drivers should use the generic-phy framework, not the
old-style usb_phy stuff, keeping this around is not useful.

Therefor this patch removes the usb_phy notification bits, which together
with the patch to remove the platform_data dependency, makes this driver
actually successfully probe on systems with an axp288 pmic.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:10 +09:00
Hans de Goede 7688424139 extcon: axp288: Remove dependency on non-existing platform_data
When the extcon_axp288 driver was originally merged, it was merged with
a dependency on some other driver providing platform data for it.

However such another driver was never merged, so the extcon_axp288 as
merged upstream has never worked, its probe method simply always returns
-ENODEV.

This commit drops the dependency on the pdata always being there, instead
it treats not having pdata as the pdata having a NULL gpio_mux_control,
something which the code was already prepared to handle.

Note that the code for controlling the mux_control gpio is left in place,
as this may be necessary to allow the axp288 pmic to properly detect the
charger type (instead of assuming 500mA max charge current) on some
tablets. This will make it easier for future patches to add support for
this gpio by getting the gpio info from somewhere.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:09 +09:00
Roger Quadros 9fe172b9be extcon: palmas: Check the parent instance to prevent the NULL
extcon-palmas must be child of palmas and expects parent's
drvdata to be valid. Check for non NULL parent drvdata and
fail if it is NULL. Not doing so will result in a NULL
pointer dereference later in the probe() parent drvdata
is NULL (e.g. misplaced extcon-palmas node in device tree).

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:09 +09:00
Srikant Ritolia af57fa4de2 extcon: Restructure multi-line comments to follow codingstyle
Aligning all block comments in extcon subsystem as per linux coding style.
Found using checkpatch.pl script.

Signed-off-by: Srikant Ritolia <s.ritolia@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:09 +09:00
Pan Bian e7d9dd5ab1 extcon: Return error code on failure
Function get_zeroed_page() returns a NULL pointer if there is no enough
memory. In function extcon_sync(), it returns 0 if the call to
get_zeroed_page() fails. The return value 0 indicates success in the
context, which is incosistent with the execution status. This patch
fixes the bug by returning -ENOMEM.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188611

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:09 +09:00
Charles Keepax 6c467a106f extcon: arizona: Simplify micd_pol_gpio handling
Currently we handle both old style GPIO and new style GPIOD differently
simplify this slightly by converting the old style GPIO to a GPIOD and
just using that from then on.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:09 +09:00
Linus Torvalds ce38207f16 sound updates for 4.10-rc1
No dramatic changes are found in this development cycle, but as usual,
 many commits are applied in a wide range of drivers.
 
 Most of big changes are in ASoC, where a few bits of framework work
 and quite a lot of cleanups and improvements to existing code have
 been done.  The rest are usual stuff, a few HD-audio and USB-audio
 quirks and fixes, as well as the drop of kthread usages in the whole
 subsystem.
 
 Below are some highlights:
 
 ASoC:
 - Support for stereo DAPM controls
 - Some initial work on the of-graph sound card
 - regmap conversions of the remaining AC'97 drivers
 - A new version of the topology ABI; this should be backward compatible
 - Updates / cleanups of rsnd, sunxi, sti, nau8825, samsung, arizona,
   Intel skylake, atom-sst
 - New drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and
   Realtek RT5665
 
 USB-audio:
 - Yet another race fix at disconnection
 - Tolerated packet size calculation for some Android devices
 - Quirks for Axe-Fx II, QuickCam, TEAC 501/503
 
 HD-audio:
 - Improvement of Dell pin fixup mapping
 - Quirks for HP Z1 Gen3, Alienware 15 R2 2016 and ALC622 headset mic
 
 Misc:
 - Replace all kthread usages with simple works
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJYUGNQAAoJEGwxgFQ9KSmkc3kP/jS5EDPWb6dwqdlZomT0lumR
 flpvLLo6TWTi9CS8MkC1hPHbR+3LGPMUL8Wwf2cVb06dvKpUHa5P3Wq6lMm6T9wO
 1ExhnHeDEDfGXop3/EuADmpRsfsV+z/PpWYmGB0vkoyPTg7e3xQRA6Im6p6IMi45
 pnvEaSe18oEidqzAxaBgBFTdoNyaD9zrPL5J9Jh0/JCZ/kSmY6hhI+hlTjjOKCR6
 fs4ge2WreonAKbhfOE61eE2KDnQA4II/2JUoPA42wZOat9ukb8DiErgHoFgsWTtE
 h+/ZN5Qj3dweP3+NIKsWrmfC6qzTt9OnUNPB2O0A+UYmAMQBjBz9KVxW1FHyTqBp
 ewATtvCNIQs+uPMaO/Q/Qo3ZkKLf/W7o/Dt2u/orSrnQ2plKgIOiHJodhXlTrOWm
 szF+qJq0xRB7+/dZa+gDjGPAjirr6n3Fv7wrJmqfyF0hLaIEy4wa2Rd/IAZ9Ar46
 5S4prL2Ba1CKf1YV27DR1bjUTAonlApfczNp+urCGQJCfZ0kQOAhZJQ/mbMOgSDS
 KEC0vY6NLr88b19OETS4oQZ0ixxIAm8hwAle6z39GGhGZ8JWH5+JRzy8emVh2bss
 lpFLFHLwK+a+JHxmnOniJW9AlC8I7hVqfS63qaTXfvDnMMcRd5fMgniZt8bTWc2/
 F5hsE83JUlcA8Owfyoca
 =WZeb
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "No dramatic changes are found in this development cycle, but as usual,
  many commits are applied in a wide range of drivers.

  Most of big changes are in ASoC, where a few bits of framework work
  and quite a lot of cleanups and improvements to existing code have
  been done. The rest are usual stuff, a few HD-audio and USB-audio
  quirks and fixes, as well as the drop of kthread usages in the whole
  subsystem.

  Below are some highlights:

  ASoC:
   - support for stereo DAPM controls
   - some initial work on the of-graph sound card
   - regmap conversions of the remaining AC'97 drivers
   - a new version of the topology ABI; this should be backward
     compatible
   - updates / cleanups of rsnd, sunxi, sti, nau8825, samsung, arizona,
     Intel skylake, atom-sst
   - new drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and
     Realtek RT5665

  USB-audio:
   - yet another race fix at disconnection
   - tolerated packet size calculation for some Android devices
   - quirks for Axe-Fx II, QuickCam, TEAC 501/503

  HD-audio:
   - improvement of Dell pin fixup mapping
   - quirks for HP Z1 Gen3, Alienware 15 R2 2016 and ALC622 headset mic

  Misc:
   - replace all kthread usages with simple works"

* tag 'sound-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (296 commits)
  ALSA: hiface: Fix M2Tech hiFace driver sampling rate change
  ALSA: usb-audio: Eliminate noise at the start of DSD playback.
  ALSA: usb-audio: Add native DSD support for TEAC 501/503 DAC
  ASoC: wm_adsp: wm_adsp_buf_alloc should use kfree in error path
  ASoC: topology: avoid uninitialized kcontrol_type
  ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks
  ALSA: usb-audio: add implicit fb quirk for Axe-Fx II
  ASoC: zte: spdif: correct ZX_SPDIF_CLK_RAT define
  ASoC: zte: spdif and i2s drivers are not zx296702 specific
  ASoC: rsnd: setup BRGCKR/BRRA/BRRB when starting
  ASoC: rsnd: enable/disable ADG when suspend/resume timing
  ASoC: rsnd: tidyup ssi->usrcnt counter check in hw_params
  ALSA: cs46xx: add a new line
  ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic capture
  ASoC: nau8825: disable sinc filter for high THD of ADC
  ALSA: usb-audio: more tolerant packetsize
  ALSA: usb-audio: avoid setting of sample rate multiple times on bus
  ASoC: cs35l34: Simplify the logic to set CS35L34_MCLK_CTL setting
  ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO
  ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq
  ...
2016-12-14 11:14:28 -08:00
Mark Brown fba3040105 Merge remote-tracking branches 'asoc/topic/dpcm', 'asoc/topic/es8328', 'asoc/topic/extcon' and 'asoc/topic/fsl' into asoc-next 2016-12-12 15:52:58 +00:00
Richard Fitzgerald efd95c71f4 extcon: arizona: Use SoC component pin control functions
The name of a codec pin can have an optional prefix string, which is
defined by the SoC machine driver. The snd_soc_dapm_x_pin functions
take the fully-specified name including the prefix and so the existing
code would fail to find the pin if the audio machine driver had added
a prefix.

Switch to using the snd_soc_component_x_pin equivalent functions that
take a specified SoC component and automatically add the name prefix to
the provided pin name.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-01 20:18:44 +00:00
Roger Quadros 541332a13b extcon: usb-gpio: Add VBUS detection support
Driver can now work with both ID and VBUS pins or either one of
them.

There can be the following 3 cases

1) Both ID and VBUS GPIOs are available:

ID = LOW -> USB_HOST active, USB inactive
ID = HIGH -> USB_HOST inactive, USB state is same as VBUS.

2) Only ID GPIO is available:

ID = LOW -> USB_HOST active, USB inactive
ID = HIGH -> USB_HOST inactive, USB active

3) Only VBUS GPIO is available:

VBUS = LOW -> USB_HOST inactive, USB inactive
VBUS = HIGH -> USB_HOST inactive, USB active

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-11-20 21:22:39 +09:00
Stephen Boyd 2925d366f4 extcon: qcom-spmi-misc: Sync the extcon state on interrupt
The driver was changed after submission to use the new style APIs
like extcon_set_state(). Unfortunately, that only sets the state,
and doesn't notify any consumers that the cable state has
changed. Use extcon_set_state_sync() here instead so that we
notify cable consumers of the state change. This fixes USB
host-device role switching on the db8074 platform.

Fixes: 38085c987f ("extcon: Add support for qcom SPMI PMIC USB id detection hardware")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-10-26 16:04:29 +09:00
Kishon Vijay Abraham I cb9850d092 Merge branch 'next' into resolution
Conflicts:
	drivers/extcon/extcon-adc-jack.c
	drivers/extcon/extcon-arizona.c
	drivers/extcon/extcon-gpio.c
	include/linux/extcon.h
2016-09-15 16:45:20 +05:30
Stephen Boyd 38085c987f extcon: Add support for qcom SPMI PMIC USB id detection hardware
Some Qualcomm PMICs have a misc device that performs USB id pin
detection via an interrupt. When the interrupt triggers, we
should read the interrupt line to see if it has gone high or low.
If the interrupt is low then the ID pin is grounded, and if the
interrupt is high then the ID pin is being held high.

Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
[cw00.choi: Edited the driver description and added the author information]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-13 11:26:26 +09:00
Chanwoo Choi 8670b45980 extcon: Use the extcon_set_state_sync() instead of deprecated functions
This patch alters the renamed extcon API to set the state of the external
connectors instead of deprecated extcon_set_cable_state_().

Because the patch[1] modifies the function name to maintain the function
naming pattern.
- extcon_set_cable_state_() -> extcon_set_state_sync()
- extcon_get_cable_state_() -> extcon_get_state()

[1] https://lkml.org/lkml/2016/8/4/729
- extcon: Rename the extcon_set/get_state() to maintain the function naming pattern

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Roger Quadros <rogerq@ti.com>
2016-09-13 11:26:26 +09:00
Colin Ian King 525867dbd1 extcon: axp288: Fix spelling mistake
This patch fixes the spelling mistake in dev_dbg messages.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
[cw00.choi: Modify the patch title/description]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-13 11:26:26 +09:00
Krzysztof Kozlowski e5b07e555b extcon: max14577: Change Krzysztof Kozlowski's email to kernel.org
Change my email address to kernel.org instead of Samsung one for the
purpose of any future contact.  The copyrights remain untouched and are
attributed to Samsung.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-13 11:26:26 +09:00
Chanwoo Choi af9b9285f2 extcon: Add new EXTCON_CHG_WPT for Wireless Power Transfer device
This patchs add the new EXTCON_CHG_WPT for Wireless Power Transfer[1].
The Wireless Power Transfer is the transmission of electronical energy
from a power source. The EXTCON_CHG_WPT has the EXTCON_TYPE_CHG.

[1] https://en.wikipedia.org/wiki/Wireless_power_transfer

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-10 16:48:57 +05:30
Chanwoo Choi 736d25b115 extcon: Add new EXTCON_DISP_HMD for Head-mounted Display device
This patch adds the new EXTCON_DISP_HMD id for Head-mounted Display[1] device.
The HMD device is usually for USB connector type So, the HMD connector
has the two extcon types of both EXTCON_TYPE_DISP and EXTCON_TYPE_USB.

[1] https://en.wikipedia.org/wiki/Head-mounted_display

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-10 16:48:56 +05:30
Chris Zhong 2f25140601 extcon: Add EXTCON_DISP_DP and the property for USB Type-C
Add EXTCON_DISP_DP for the Display external connector. For Type-C
connector the DisplayPort can work as an Alternate Mode(VESA DisplayPort
Alt Mode on USB Type-C Standard). The Type-C support both normal
and flipped orientation, so add a property to extcon.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-09-10 16:48:55 +05:30
Chanwoo Choi a580982f08 extcon: Add the synchronization extcon APIs to support the notification
This patch adds the synchronization extcon APIs to support the notifications
for both state and property. When extcon_*_sync() functions is called,
the extcon informs the information from extcon provider to extcon client.

The extcon driver may need to change the both state and multiple properties
at the same time. After setting the data of a external connector,
the extcon send the notification to client driver with the extcon_*_sync().

The list of new extcon APIs as following:
- extcon_sync() : Send the notification for each external connector to
		synchronize the information between extcon provider driver
		and extcon client driver.
- extcon_set_state_sync() : Set the state of external connector with noti.
- extcon_set_property_sync() : Set the property of external connector with noti.

For example,
case 1, change the state of external connector and synchronized the data.
	extcon_set_state_sync(edev, EXTCON_USB, 1);

case 2, change both the state and property of external connector
	and synchronized the data.
	extcon_set_state(edev, EXTCON_USB, 1);
	extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS 1);
	extcon_sync(edev, EXTCON_USB);

case 3, change the property of external connector and synchronized the data.
	extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0);
	extcon_sync(edev, EXTCON_USB);

case 4, change the property of external connector and synchronized the data.
	extcon_set_property_sync(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0);

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-09-10 16:48:54 +05:30
Chanwoo Choi 35872fdcbf extcon: Rename the extcon_set/get_state() to maintain the function naming pattern
This patch just renames the existing extcon_get/set_cable_state_()
as following because of maintaining the function naming pattern
like as extcon APIs for property.
- extcon_set_cable_state_() -> extcon_set_state()
- extcon_get_cable_state_() -> extcon_get_state()

But, this patch remains the old extcon_set/get_cable_state_() functions
to prevent the build break. After altering new APIs, remove the old APIs.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-09-10 16:48:53 +05:30
Chanwoo Choi ceaa98f442 extcon: Add the support for the capability of each property
This patch adds the support of the property capability setting. This function
decides the supported properties of each external connector on extcon provider
driver.

Ths list of new extcon APIs to get/set the capability of property as following:
- int extcon_get_property_capability(struct extcon_dev *edev,
					unsigned int id, unsigned int prop);
- int extcon_set_property_capability(struct extcon_dev *edev,
					unsigned int id, unsigned int prop);

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-09-10 16:48:52 +05:30
Chanwoo Choi 067c1652e7 extcon: Add the support for extcon property according to extcon type
This patch support the extcon property for the external connector
because each external connector might have the property according to
the H/W design and the specific characteristics.

- EXTCON_PROP_USB_[property name]
- EXTCON_PROP_CHG_[property name]
- EXTCON_PROP_JACK_[property name]
- EXTCON_PROP_DISP_[property name]

Add the new extcon APIs to get/set the property value as following:
- int extcon_get_property(struct extcon_dev *edev, unsigned int id,
			unsigned int prop,
			union extcon_property_value *prop_val)
- int extcon_set_property(struct extcon_dev *edev, unsigned int id,
			unsigned int prop,
			union extcon_property_value prop_val)

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-09-10 16:48:51 +05:30
Chanwoo Choi 505cf01f98 extcon: Add the extcon_type to gather each connector into five category
This patch adds the new extcon type to group the each connecotr
into following five category. This type would be used to handle
the connectors as a group unit instead of a connector unit.
- EXTCON_TYPE_USB  : USB connector
- EXTCON_TYPE_CHG  : Charger connector
- EXTCON_TYPE_JACK : Jack connector
- EXTCON_TYPE_DISP : Display connector
- EXTCON_TYPE_MISC : Miscellaneous connector

Also, each external connector is possible to belong to one more extcon type.
In caes of EXTCON_CHG_USB_SDP, it have the EXTCON_TYPE_CHG and EXTCON_TYPE_USB.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-09-10 16:48:51 +05:30
Maninder Singh 6e25baab5a extcon: Fix compile time warning
This patch fixes below compilation warning:-
drivers/extcon/extcon.c: In function extcon_register_notifier:
drivers/extcon/extcon.c:455:6: warning: idx may be used uninitialized in this function [-Wmaybe-uninitialized]
   if (idx >= 0) {

Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
[cw00.choi : Modify the patch title using the a captical letter for first char]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-10 16:48:50 +05:30
Chanwoo Choi 84c48dc559 extcon: Block the bit masking operation for cable state except for extcon core
This patch restrict the usage of extcon_update_state() in the extcon
core because the extcon_update_state() use the bit masking to change
the state of external connector. When this function is used in device drivers,
it may occur the probelm with the handling mistake of bit masking.

Also, this patch removes the extcon_get/set_state() functions because these
functions use the bit masking which is reluctant way. Instead, extcon
provides the extcon_set/get_cable_state_() functions.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-10 16:48:49 +05:30
Chanwoo Choi 0143f59de5 extcon: Remove the state_store() to prevent the wrong access
This patch removes the state_store() which change the state of external
connectors with bit masking on user-space. It is wrong access to modify
the change the state of external connectors.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-10 16:48:48 +05:30
Chanwoo Choi 1662622fe5 extcon: gpio: Remove the usage of extcon_set_state()
This patch removes the usage of extcon_set_state() because it uses
the bit masking to change the state of external connectors. The extcon framework
should handle the state by extcon_set_cable_state_() with extcon id.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-10 16:48:47 +05:30
Chanwoo Choi cc60211237 extcon: adc-jack: Remove the usage of extcon_set_state()
This patch removes the usage of extcon_set_state() because it uses the bit
masking to change the state of external connectors. The extcon framework
should handle the state by extcon_set/get_cable_state_() with extcon id.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-10 16:48:46 +05:30
Chanwoo Choi cdc0583202 extcon: arizona: Remove the usage of extcon_update_state()
This patch remvoes the usage of extcon_update_state() because
the extcon_update_state() use directly the bit masking calculation
to change the state of external connector without the unique id of
external connector. It makes the code diffcult to read it.
So, this patch uses the extcon_set_cable_state_() instead.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2016-09-10 16:48:45 +05:30
Charles Keepax 32daff5d77 extcon: arizona: Remove unneeded semi-colon
There is no need for a semi-colon at the end of a switch statement so
remove it.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-10 16:48:44 +05:30
Stephen Boyd 97536d1d27 extcon: Move extcon_get_edev_by_phandle() errors to dbg level
Sometimes drivers may call this API and expect it to fail because
the extcon they're looking for is optional. Let's move these
prints to debug level so it doesn't look like there's a problem
when there isn't one.

Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-10 16:48:43 +05:30
Venkat Reddy Talla 44d6106808 extcon: adc-jack: update cable state during boot
Update cable state during boot to avoid any missing
external cable events occurred before driver initialisation.

Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-10 16:48:42 +05:30
Chanwoo Choi 7fe95fb889 extcon: Add new EXTCON_CHG_WPT for Wireless Power Transfer device
This patchs add the new EXTCON_CHG_WPT for Wireless Power Transfer[1].
The Wireless Power Transfer is the transmission of electronical energy
from a power source. The EXTCON_CHG_WPT has the EXTCON_TYPE_CHG.

[1] https://en.wikipedia.org/wiki/Wireless_power_transfer

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08 11:17:23 +09:00
Chanwoo Choi 9c0595d688 extcon: Add new EXTCON_DISP_HMD for Head-mounted Display device
This patch adds the new EXTCON_DISP_HMD id for Head-mounted Display[1] device.
The HMD device is usually for USB connector type So, the HMD connector
has the two extcon types of both EXTCON_TYPE_DISP and EXTCON_TYPE_USB.

[1] https://en.wikipedia.org/wiki/Head-mounted_display

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08 11:17:23 +09:00
Chris Zhong 2164188d57 extcon: Add EXTCON_DISP_DP and the property for USB Type-C
Add EXTCON_DISP_DP for the Display external connector. For Type-C
connector the DisplayPort can work as an Alternate Mode(VESA DisplayPort
Alt Mode on USB Type-C Standard). The Type-C support both normal
and flipped orientation, so add a property to extcon.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08 11:17:23 +09:00
Chanwoo Choi ab11af049f extcon: Add the synchronization extcon APIs to support the notification
This patch adds the synchronization extcon APIs to support the notifications
for both state and property. When extcon_*_sync() functions is called,
the extcon informs the information from extcon provider to extcon client.

The extcon driver may need to change the both state and multiple properties
at the same time. After setting the data of a external connector,
the extcon send the notification to client driver with the extcon_*_sync().

The list of new extcon APIs as following:
- extcon_sync() : Send the notification for each external connector to
		synchronize the information between extcon provider driver
		and extcon client driver.
- extcon_set_state_sync() : Set the state of external connector with noti.
- extcon_set_property_sync() : Set the property of external connector with noti.

For example,
case 1, change the state of external connector and synchronized the data.
	extcon_set_state_sync(edev, EXTCON_USB, 1);

case 2, change both the state and property of external connector
	and synchronized the data.
	extcon_set_state(edev, EXTCON_USB, 1);
	extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS 1);
	extcon_sync(edev, EXTCON_USB);

case 3, change the property of external connector and synchronized the data.
	extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0);
	extcon_sync(edev, EXTCON_USB);

case 4, change the property of external connector and synchronized the data.
	extcon_set_property_sync(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0);

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08 11:17:22 +09:00
Chanwoo Choi 575c2b867e extcon: Rename the extcon_set/get_state() to maintain the function naming pattern
This patch just renames the existing extcon_get/set_cable_state_()
as following because of maintaining the function naming pattern
like as extcon APIs for property.
- extcon_set_cable_state_() -> extcon_set_state()
- extcon_get_cable_state_() -> extcon_get_state()

But, this patch remains the old extcon_set/get_cable_state_() functions
to prevent the build break. After altering new APIs, remove the old APIs.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08 11:17:22 +09:00
Chanwoo Choi 7f2a0a1699 extcon: Add the support for the capability of each property
This patch adds the support of the property capability setting. This function
decides the supported properties of each external connector on extcon provider
driver.

Ths list of new extcon APIs to get/set the capability of property as following:
- int extcon_get_property_capability(struct extcon_dev *edev,
					unsigned int id, unsigned int prop);
- int extcon_set_property_capability(struct extcon_dev *edev,
					unsigned int id, unsigned int prop);

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08 11:17:22 +09:00
Chanwoo Choi 792e7e9e5d extcon: Add the support for extcon property according to extcon type
This patch support the extcon property for the external connector
because each external connector might have the property according to
the H/W design and the specific characteristics.

- EXTCON_PROP_USB_[property name]
- EXTCON_PROP_CHG_[property name]
- EXTCON_PROP_JACK_[property name]
- EXTCON_PROP_DISP_[property name]

Add the new extcon APIs to get/set the property value as following:
- int extcon_get_property(struct extcon_dev *edev, unsigned int id,
			unsigned int prop,
			union extcon_property_value *prop_val)
- int extcon_set_property(struct extcon_dev *edev, unsigned int id,
			unsigned int prop,
			union extcon_property_value prop_val)

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08 11:17:22 +09:00
Chanwoo Choi 55e4e2f129 extcon: Add the extcon_type to gather each connector into five category
This patch adds the new extcon type to group the each connecotr
into following five category. This type would be used to handle
the connectors as a group unit instead of a connector unit.
- EXTCON_TYPE_USB  : USB connector
- EXTCON_TYPE_CHG  : Charger connector
- EXTCON_TYPE_JACK : Jack connector
- EXTCON_TYPE_DISP : Display connector
- EXTCON_TYPE_MISC : Miscellaneous connector

Also, each external connector is possible to belong to one more extcon type.
In caes of EXTCON_CHG_USB_SDP, it have the EXTCON_TYPE_CHG and EXTCON_TYPE_USB.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
2016-08-08 11:17:20 +09:00
Maninder Singh 2c8116a111 extcon: Fix compile time warning
This patch fixes below compilation warning:-
drivers/extcon/extcon.c: In function extcon_register_notifier:
drivers/extcon/extcon.c:455:6: warning: idx may be used uninitialized in this function [-Wmaybe-uninitialized]
   if (idx >= 0) {

Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
[cw00.choi : Modify the patch title using the a captical letter for first char]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08 10:58:37 +09:00
Chanwoo Choi 912465bcf8 extcon: Block the bit masking operation for cable state except for extcon core
This patch restrict the usage of extcon_update_state() in the extcon
core because the extcon_update_state() use the bit masking to change
the state of external connector. When this function is used in device drivers,
it may occur the probelm with the handling mistake of bit masking.

Also, this patch removes the extcon_get/set_state() functions because these
functions use the bit masking which is reluctant way. Instead, extcon
provides the extcon_set/get_cable_state_() functions.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08 10:58:36 +09:00
Chanwoo Choi 5d5321e90a extcon: Remove the state_store() to prevent the wrong access
This patch removes the state_store() which change the state of external
connectors with bit masking on user-space. It is wrong access to modify
the change the state of external connectors.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08 10:58:36 +09:00
Chanwoo Choi 7575591c2d extcon: gpio: Remove the usage of extcon_set_state()
This patch removes the usage of extcon_set_state() because it uses
the bit masking to change the state of external connectors. The extcon framework
should handle the state by extcon_set_cable_state_() with extcon id.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08 10:58:36 +09:00
Chanwoo Choi a7da72eeec extcon: adc-jack: Remove the usage of extcon_set_state()
This patch removes the usage of extcon_set_state() because it uses the bit
masking to change the state of external connectors. The extcon framework
should handle the state by extcon_set/get_cable_state_() with extcon id.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08 10:58:35 +09:00
Chanwoo Choi 5475e63175 extcon: arizona: Remove the usage of extcon_update_state()
This patch remvoes the usage of extcon_update_state() because
the extcon_update_state() use directly the bit masking calculation
to change the state of external connector without the unique id of
external connector. It makes the code diffcult to read it.
So, this patch uses the extcon_set_cable_state_() instead.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2016-08-08 10:58:35 +09:00
Charles Keepax c19dc203e6 extcon: arizona: Remove unneeded semi-colon
There is no need for a semi-colon at the end of a switch statement so
remove it.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08 10:58:35 +09:00
Stephen Boyd e8752b7a72 extcon: Move extcon_get_edev_by_phandle() errors to dbg level
Sometimes drivers may call this API and expect it to fail because
the extcon they're looking for is optional. Let's move these
prints to debug level so it doesn't look like there's a problem
when there isn't one.

Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08 10:58:35 +09:00
Venkat Reddy Talla ba4b27151a extcon: adc-jack: update cable state during boot
Update cable state during boot to avoid any missing
external cable events occurred before driver initialisation.

Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-08-08 10:58:35 +09:00
Venkat Reddy Talla 1b6cf31010 extcon: adc-jack: add suspend/resume support
adding suspend and resume funtionality for extcon-adc-jack
driver to configure system wake up for extcon events,
also adding support to enable/disable system wakeup
through flag wakeup_source based on platform requirement.

Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-07-02 14:31:34 +09:00
Peter Chen 5d5c4c139d extcon: add missing of_node_put after calling of_parse_phandle
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-07-02 13:24:25 +09:00
Arnd Bergmann af61f96109 extcon: link devres into core module
Splitting the resource-managed functions into a separate module
means that the extcon core now fails to build because the internal
"extcon_dev_allocate" symbol is not exported:

ERROR: extcon_dev_allocate [drivers/extcon/devres.ko] undefined!

My guess is that the intention was not to have two separate
modules (which could be fixed by adding an export, plus the
normal MODULE_AUTHOR/MODULE_LICENSE/... fields), but have two
source files in the same module.

This fixes the Makefile accordingly, making the name of the
module extcon_core.ko, which is created from building both
extcon.c and devres.c.

Fixes: b225d00f3a ("extcon: Split out the resource-managed functions from extcon core")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-30 22:18:40 +09:00
Chanwoo Choi 58f386560a extcon: Add resource-managed functions to register extcon notifier
This patch adds the resource-managed functions for register/unregister
the extcon notifier with the id of each external connector. This function
will make it easy to handle the extcon notifier.

- int devm_extcon_register_notifier(struct device *dev,
				struct extcon_dev *edev, unsigned int id,
				struct notifier_block *nb);
- void devm_extcon_unregister_notifier(struct device *dev,
				struct extcon_dev *edev, unsigned int id,
				struct notifier_block *nb);

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-27 21:03:23 +09:00
Chanwoo Choi b225d00f3a extcon: Split out the resource-managed functions from extcon core
This patch split out the resource-managed related functions
from extcon core driver.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-27 20:31:23 +09:00
Chanwoo Choi 20f7b53dfc extcon: Move struct extcon_cable from header file to core
This patch moves the struct extcon_cable because that should
be only handled by extcon core. There are no reason to publish
the internal structure.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-27 20:31:21 +09:00
Stephen Boyd a05f44c89e extcon: Check for incorrect connection type in notifier register
If we call extcon_register_notifier() with the wrong cable type,
it blows up with an oops instead of returning an error code.
Let's be nice and fail gracefully given that the consumer might
not know if the cable is supported by the extcon provider.

Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-23 19:35:10 +09:00
Chanwoo Choi 70a7da4587 Merge branch 'ib-extcon-powersupply-4.8' into extcon-next 2016-06-21 14:10:00 +09:00
Lu Baolu 942c7924a5 extcon: usb-gpio: add support for ACPI gpio interface
GPIO resource could be retrieved through APCI as well.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-06-21 14:09:53 +09:00