Commit Graph

1223 Commits

Author SHA1 Message Date
Michael Kelley 57f01796f1 irq/matrix: Fix memory overallocation
IRQ_MATRIX_SIZE is the number of longs needed for a bitmap, multiplied by
the size of a long, yielding a byte count. But it is used to size an array
of longs, which is way more memory than is needed.

Change IRQ_MATRIX_SIZE so it is just the number of longs needed and the
arrays come out the correct size.

Fixes: 2f75d9e1c9 ("genirq: Implement bitmap matrix allocator")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: KY Srinivasan <kys@microsoft.com>
Link: https://lkml.kernel.org/r/1541032428-10392-1-git-send-email-mikelley@microsoft.com
2018-11-01 10:00:38 +01:00
Linus Torvalds 5947a64a7e Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The interrupt brigade came up with the following updates:

   - Driver for the Marvell System Error Interrupt machinery

   - Overhaul of the GIC-V3 ITS driver

   - Small updates and fixes all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  genirq: Fix race on spurious interrupt detection
  softirq: Fix typo in __do_softirq() comments
  genirq: Fix grammar s/an /a /
  irqchip/gic: Unify GIC priority definitions
  irqchip/gic-v3: Remove acknowledge loop
  dt-bindings/interrupt-controller: Add documentation for Marvell SEI controller
  dt-bindings/interrupt-controller: Update Marvell ICU bindings
  irqchip/irq-mvebu-icu: Add support for System Error Interrupts (SEI)
  arm64: marvell: Enable SEI driver
  irqchip/irq-mvebu-sei: Add new driver for Marvell SEI
  irqchip/irq-mvebu-icu: Support ICU subnodes
  irqchip/irq-mvebu-icu: Disociate ICU and NSR
  irqchip/irq-mvebu-icu: Clarify the reset operation of configured interrupts
  irqchip/irq-mvebu-icu: Fix wrong private data retrieval
  dt-bindings/interrupt-controller: Fix Marvell ICU length in the example
  genirq/msi: Allow creation of a tree-based irqdomain for platform-msi
  dt-bindings: irqchip: renesas-irqc: Document r8a7744 support
  dt-bindings: irqchip: renesas-irqc: Document R-Car E3 support
  irqchip/pdc: Setup all edge interrupts as rising edge at GIC
  irqchip/gic-v3-its: Allow use of LPI tables in reserved memory
  ...
2018-10-25 11:43:47 -07:00
Lukas Wunner 746a923b86 genirq: Fix race on spurious interrupt detection
Commit 1e77d0a1ed ("genirq: Sanitize spurious interrupt detection of
threaded irqs") made detection of spurious interrupts work for threaded
handlers by:

a) incrementing a counter every time the thread returns IRQ_HANDLED, and
b) checking whether that counter has increased every time the thread is
   woken.

However for oneshot interrupts, the commit unmasks the interrupt before
incrementing the counter.  If another interrupt occurs right after
unmasking but before the counter is incremented, that interrupt is
incorrectly considered spurious:

time
 |  irq_thread()
 |    irq_thread_fn()
 |      action->thread_fn()
 |      irq_finalize_oneshot()
 |        unmask_threaded_irq()            /* interrupt is unmasked */
 |
 |                  /* interrupt fires, incorrectly deemed spurious */
 |
 |    atomic_inc(&desc->threads_handled); /* counter is incremented */
 v

This is observed with a hi3110 CAN controller receiving data at high volume
(from a separate machine sending with "cangen -g 0 -i -x"): The controller
signals a huge number of interrupts (hundreds of millions per day) and
every second there are about a dozen which are deemed spurious.

In theory with high CPU load and the presence of higher priority tasks, the
number of incorrectly detected spurious interrupts might increase beyond
the 99,900 threshold and cause disablement of the interrupt.

In practice it just increments the spurious interrupt count. But that can
cause people to waste time investigating it over and over.

Fix it by moving the accounting before the invocation of
irq_finalize_oneshot().

[ tglx: Folded change log update ]

Fixes: 1e77d0a1ed ("genirq: Sanitize spurious interrupt detection of threaded irqs")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Akshay Bhat <akshay.bhat@timesys.com>
Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com>
Cc: stable@vger.kernel.org # v3.16+
Link: https://lkml.kernel.org/r/1dfd8bbd16163940648045495e3e9698e63b50ad.1539867047.git.lukas@wunner.de
2018-10-19 17:31:00 +02:00
Geert Uytterhoeven b8d62f33b7 genirq: Fix grammar s/an /a /
Fix a grammar mistake in <linux/interrupt.h>.

[ mingo: While at it also fix another similar error in another comment as well. ]

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181008111726.26286-1-geert%2Brenesas@glider.be
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-09 07:50:41 +02:00
Marc Zyngier 94967b55eb genirq/debugfs: Reinstate full OF path for domain name
On a DT based system, we use the of_node full name to name the
corresponding irq domain. We expect that name to be unique, so so that
domains with the same base name won't clash (this happens on multi-node
topologies, for example).

Since a7e4cfb0a7 ("of/fdt: only store the device node basename in
full_name"), of_node_full_name() lies and only returns the basename. This
breaks the above requirement, and we end-up with only a subset of the
domains in /sys/kernel/debug/irq/domains.

Let's reinstate the feature by using the fancy new %pOF format specifier,
which happens to do the right thing.

Fixes: a7e4cfb0a7 ("of/fdt: only store the device node basename in full_name")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181001100522.180054-3-marc.zyngier@arm.com
2018-10-01 12:24:53 +02:00
Marc Zyngier 513145ea66 genirq/debugfs: Reset domain debugfs_file on removal of the debugfs file
When removing a debugfs file for a given irq domain, we fail to clear the
corresponding field, meaning that the corresponding domain won't be created
again if we need to do so.

It turns out that this is exactly what irq_domain_update_bus_token does
(delete old file, update domain name, recreate file).

This doesn't have any impact other than making debug more difficult, but we
do value ease of debugging... So clear the debugfs_file field.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181001100522.180054-2-marc.zyngier@arm.com
2018-10-01 12:24:53 +02:00
Dou Liyang 76f99ae5b5 irq/matrix: Spread managed interrupts on allocation
Linux spreads out the non managed interrupt across the possible target CPUs
to avoid vector space exhaustion.

Managed interrupts are treated differently, as for them the vectors are
reserved (with guarantee) when the interrupt descriptors are initialized.

When the interrupt is requested a real vector is assigned. The assignment
logic uses the first CPU in the affinity mask for assignment. If the
interrupt has more than one CPU in the affinity mask, which happens when a
multi queue device has less queues than CPUs, then doing the same search as
for non managed interrupts makes sense as it puts the interrupt on the
least interrupt plagued CPU. For single CPU affine vectors that's obviously
a NOOP.

Restructre the matrix allocation code so it does the 'best CPU' search, add
the sanity check for an empty affinity mask and adapt the call site in the
x86 vector management code.

[ tglx: Added the empty mask check to the core and improved change log ]

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20180908175838.14450-2-dou_liyang@163.com
2018-09-18 18:27:24 +02:00
Dou Liyang 8ffe4e61c0 irq/matrix: Split out the CPU selection code into a helper
Linux finds the CPU which has the lowest vector allocation count to spread
out the non managed interrupts across the possible target CPUs, but does
not do so for managed interrupts.

Split out the CPU selection code into a helper function for reuse. No
functional change.

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20180908175838.14450-1-dou_liyang@163.com
2018-09-18 18:27:24 +02:00
Linus Torvalds d0daaeaf60 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull genirq updates from Thomas Gleixner:
 "The irq departement provides:

   - A synchronization fix for free_irq() to synchronize just the
     removed interrupt thread on shared interrupt lines.

   - Consolidate the multi low level interrupt entry handling and mvoe
     it to the generic code instead of adding yet another copy for
     RISC-V

   - Refactoring of the ARM LPI allocator and LPI exposure to the
     hypervisor

   - Yet another interrupt chip driver for the JZ4725B SoC

   - Speed up for /proc/interrupts as people seem to love reading this
     file with high frequency

   - Miscellaneous fixes and updates"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  irqchip/gic-v3-its: Make its_lock a raw_spin_lock_t
  genirq/irqchip: Remove MULTI_IRQ_HANDLER as it's now obselete
  openrisc: Use the new GENERIC_IRQ_MULTI_HANDLER
  arm64: Use the new GENERIC_IRQ_MULTI_HANDLER
  ARM: Convert to GENERIC_IRQ_MULTI_HANDLER
  irqchip: Port the ARM IRQ drivers to GENERIC_IRQ_MULTI_HANDLER
  irqchip/gic-v3-its: Reduce minimum LPI allocation to 1 for PCI devices
  dt-bindings: irqchip: renesas-irqc: Document r8a77980 support
  dt-bindings: irqchip: renesas-irqc: Document r8a77470 support
  irqchip/ingenic: Add support for the JZ4725B SoC
  irqchip/stm32: Add exti0 translation for stm32mp1
  genirq: Remove redundant NULL pointer check in __free_irq()
  irqchip/gic-v3-its: Honor hypervisor enforced LPI range
  irqchip/gic-v3: Expose GICD_TYPER in the rdist structure
  irqchip/gic-v3-its: Drop chunk allocation compatibility
  irqchip/gic-v3-its: Move minimum LPI requirements to individual busses
  irqchip/gic-v3-its: Use full range of LPIs
  irqchip/gic-v3-its: Refactor LPI allocator
  genirq: Synchronize only with single thread on free_irq()
  genirq: Update code comments wrt recycled thread_mask
  ...
2018-08-13 10:47:26 -07:00
Thomas Gleixner 9e90c79852 irqchip updates for 4.19
- GICv3 ITS LPI allocation revamp
 - GICv3 support for hypervisor-enforced LPI range
 - GICv3 ITS conversion to raw spinlock
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAltoBXMVHG1hcmMuenlu
 Z2llckBhcm0uY29tAAoJECPQ0LrRPXpDyUYP/1feAq3F7ZmhCIZka4c6y/m4EBpq
 BjWEEgOAGMEyyB4s98flsRtZcEUxxp6CqEXo2FgCsd1Nj+og7oA7vwOlqy3aGzsi
 9f/Z5Wi6SlG06lH5tmYNkyVbGk2tE3s2FzkH5Rg8qZGk+X3OCOdNs/+G20pYAkSp
 ESePWSapbQUJSExJ1MqzfdHFidtVA1V+ev8BKdIp2ykl1NRae8LJeKHIbqac49Ym
 JclfCLFpQM1M1ElB9j0E8hAvZhz10oOz7TtBR737O/1QEifVyFqGBckPzldvwIJM
 zZ+nR+Yzj1ruD109xwaF1iKy9AinZWhiqrtN7UXJ3jwHtNih+sy0R6FQ38GMNoOC
 0K02n/qStR5xglGr4BmAcWlOuFtBYWfz6HpSVMqaTWWmOxHEiqS6pXtEA+dV/YyI
 wHLbo0YzpWTQm6t1+b/PoByAJ0/hOcD1nOD57b+NGjX7tZV0sGjpGsecvFhTSywh
 BN3COBi9k/FOBrOTGDX1qUAI+mEf76vc2BAC+BkkoiiMg3WlY0E9qfQJguUxHdrb
 0LS3lDZoHCNoz8RZLrUyenTT0NYGcjPGUTinMDJWG79VGXOWFexTDdCuX0kF90CK
 1Zie3O6lrTYolmaiyLUxwukKp1SVUyoA5IpKVwfDJQYUhEfk27yvlzg2MBMcHDRA
 uy3QSkmjx9vw/sAu
 =gKw8
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

- GICv3 ITS LPI allocation revamp
- GICv3 support for hypervisor-enforced LPI range
- GICv3 ITS conversion to raw spinlock
2018-08-06 12:45:42 +02:00
Thomas Gleixner d1f0301b33 genirq: Make force irq threading setup more robust
The support of force threading interrupts which are set up with both a
primary and a threaded handler wreckaged the setup of regular requested
threaded interrupts (primary handler == NULL).

The reason is that it does not check whether the primary handler is set to
the default handler which wakes the handler thread. Instead it replaces the
thread handler with the primary handler as it would do with force threaded
interrupts which have been requested via request_irq(). So both the primary
and the thread handler become the same which then triggers the warnon that
the thread handler tries to wakeup a not configured secondary thread.

Fortunately this only happens when the driver omits the IRQF_ONESHOT flag
when requesting the threaded interrupt, which is normaly caught by the
sanity checks when force irq threading is disabled.

Fix it by skipping the force threading setup when a regular threaded
interrupt is requested. As a consequence the interrupt request which lacks
the IRQ_ONESHOT flag is rejected correctly instead of silently wreckaging
it.

Fixes: 2a1d3ab898 ("genirq: Handle force threading of irqs with primary and thread handler")
Reported-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de>
Cc: stable@vger.kernel.org
2018-08-03 15:19:01 +02:00
Palmer Dabbelt 4f7799d96e genirq/irqchip: Remove MULTI_IRQ_HANDLER as it's now obselete
Now that every user of MULTI_IRQ_HANDLER has been convereted over to use
GENERIC_IRQ_MULTI_HANDLER remove the references to MULTI_IRQ_HANDLER.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux@armlinux.org.uk
Cc: catalin.marinas@arm.com
Cc: Will Deacon <will.deacon@arm.com>
Cc: jonas@southpole.se
Cc: stefan.kristiansson@saunalahti.fi
Cc: shorne@gmail.com
Cc: jason@lakedaemon.net
Cc: marc.zyngier@arm.com
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: nicolas.pitre@linaro.org
Cc: vladimir.murzin@arm.com
Cc: keescook@chromium.org
Cc: jinb.park7@gmail.com
Cc: yamada.masahiro@socionext.com
Cc: alexandre.belloni@bootlin.com
Cc: pombredanne@nexb.com
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: kstewart@linuxfoundation.org
Cc: jhogan@kernel.org
Cc: mark.rutland@arm.com
Cc: ard.biesheuvel@linaro.org
Cc: james.morse@arm.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: openrisc@lists.librecores.org
Link: https://lkml.kernel.org/r/20180622170126.6308-6-palmer@sifive.com
2018-08-03 12:14:10 +02:00
RAGHU Halharvi d91cfeb0aa genirq: Remove redundant NULL pointer check in __free_irq()
The NULL pointer check in __free_irq() triggers a 'dereference before NULL
pointer check' warning in static code analysis. It turns out that the check
is redundant because all callers have a NULL pointer check already.

Remove it.

Signed-off-by: RAGHU Halharvi <raghuhack78@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180717102009.7708-1-raghuhack78@gmail.com
2018-07-17 13:35:44 +02:00
Lukas Wunner 519cc8652b genirq: Synchronize only with single thread on free_irq()
When pciehp is converted to threaded IRQ handling, removal of unplugged
devices below a PCIe hotplug port happens synchronously in the IRQ thread.
Removal of devices typically entails a call to free_irq() by their drivers.

If those devices share their IRQ with the hotplug port, __free_irq()
deadlocks because it calls synchronize_irq() to wait for all hard IRQ
handlers as well as all threads sharing the IRQ to finish.

Actually it's sufficient to wait only for the IRQ thread of the removed
device, so call synchronize_hardirq() to wait for all hard IRQ handlers to
finish, but no longer for any threads.  Compensate by rearranging the
control flow in irq_wait_for_interrupt() such that the device's thread is
allowed to run one last time after kthread_stop() has been called.

kthread_stop() blocks until the IRQ thread has completed.  On completion
the IRQ thread clears its oneshot thread_mask bit.  This is safe because
__free_irq() holds the request_mutex, thereby preventing __setup_irq() from
handing out the same oneshot thread_mask bit to a newly requested action.

Stack trace for posterity:
    INFO: task irq/17-pciehp:94 blocked for more than 120 seconds.
    schedule+0x28/0x80
    synchronize_irq+0x6e/0xa0
    __free_irq+0x15a/0x2b0
    free_irq+0x33/0x70
    pciehp_release_ctrl+0x98/0xb0
    pcie_port_remove_service+0x2f/0x40
    device_release_driver_internal+0x157/0x220
    bus_remove_device+0xe2/0x150
    device_del+0x124/0x340
    device_unregister+0x16/0x60
    remove_iter+0x1a/0x20
    device_for_each_child+0x4b/0x90
    pcie_port_device_remove+0x1e/0x30
    pci_device_remove+0x36/0xb0
    device_release_driver_internal+0x157/0x220
    pci_stop_bus_device+0x7d/0xa0
    pci_stop_bus_device+0x3d/0xa0
    pci_stop_and_remove_bus_device+0xe/0x20
    pciehp_unconfigure_device+0xb8/0x160
    pciehp_disable_slot+0x84/0x130
    pciehp_ist+0x158/0x190
    irq_thread_fn+0x1b/0x50
    irq_thread+0x143/0x1a0
    kthread+0x111/0x130

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org
Link: https://lkml.kernel.org/r/d72b41309f077c8d3bee6cc08ad3662d50b5d22a.1529828292.git.lukas@wunner.de
2018-06-24 14:17:27 +02:00
Lukas Wunner 836557bd58 genirq: Update code comments wrt recycled thread_mask
Previously a race existed between __free_irq() and __setup_irq() wherein
the thread_mask of a just removed action could be handed out to a newly
added action and the freed irq thread would then tread on the oneshot
mask bit of the newly added irq thread in irq_finalize_oneshot():

time
 |  __free_irq()
 |    raw_spin_lock_irqsave(&desc->lock, flags);
 |    <remove action from linked list>
 |    raw_spin_unlock_irqrestore(&desc->lock, flags);
 |
 |  __setup_irq()
 |    raw_spin_lock_irqsave(&desc->lock, flags);
 |    <traverse linked list to determine oneshot mask bit>
 |    raw_spin_unlock_irqrestore(&desc->lock, flags);
 |
 |  irq_thread() of freed irq (__free_irq() waits in synchronize_irq())
 |    irq_thread_fn()
 |      irq_finalize_oneshot()
 |        raw_spin_lock_irq(&desc->lock);
 |        desc->threads_oneshot &= ~action->thread_mask;
 |        raw_spin_unlock_irq(&desc->lock);
 v

The race was known at least since 2012 when it was documented in a code
comment by commit e04268b0ef ("genirq: Remove paranoid warnons and bogus
fixups"). The race itself is harmless as nothing touches any of the
potentially freed data after synchronize_irq().

In 2017 the race was close by commit 9114014cf4 ("genirq: Add mutex to
irq desc to serialize request/free_irq()"), apparently inadvertantly so
because the race is neither mentioned in the commit message nor was the
code comment updated.  Make up for that.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org
Link: https://lkml.kernel.org/r/32fc25aa35ecef4b2692f57687bb7fc2a57230e2.1529828292.git.lukas@wunner.de
2018-06-24 14:17:26 +02:00
Eric Dumazet 74bdf7815d genirq: Speedup show_interrupts()
Since commit 425a5072dc ("genirq: Free irq_desc with rcu"),
show_interrupts() can be switched to rcu locking, which removes possible
contention on sparse_irq_lock.

The per_cpu count scan and print can be done without holding desc spinlock.

And there is no need to call kstat_irqs_cpu() and abuse irq_to_desc() while
holding rcu read lock, since desc and desc->kstat_irqs wont disappear or
change.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Link: https://lkml.kernel.org/r/20180620150332.163320-1-edumazet@google.com
2018-06-22 14:22:58 +02:00
Marc Zyngier 72a8edc2d9 genirq/debugfs: Add missing IRQCHIP_SUPPORTS_LEVEL_MSI debug
Debug is missing the IRQCHIP_SUPPORTS_LEVEL_MSI debug entry, making debugfs
slightly less useful.

Take this opportunity to also add a missing comment in the definition of
IRQCHIP_SUPPORTS_LEVEL_MSI.

Fixes: 6988e0e0d2 ("genirq/msi: Limit level-triggered MSI to platform devices")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20180622095254.5906-2-marc.zyngier@arm.com
2018-06-22 14:22:00 +02:00
Jonathan Neuschäfer 0a13ec0bbc genirq: Fix editing error in a comment
When the comment was reflowed to a wider format, the "*" snuck in.

Fixes: ae88a23b32 ("irq: refactor and clean up the free_irq() code flow")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180617124018.25539-1-j.neuschaefer@gmx.net
2018-06-19 09:19:41 +02:00
Eric Dumazet 4a5f4d2f89 genirq: Use rcu in kstat_irqs_usr()
Jeremy Dorfman identified mutex contention when multiple threads
parse /proc/stat concurrently.

Since commit 425a5072dc ("genirq: Free irq_desc with rcu"),
kstat_irqs_usr() can be switched to rcu locking, which removes this mutex
contention.

show_interrupts() case will be handled in a separate patch.

Reported-by: Jeremy Dorfman <jdorfman@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Link: https://lkml.kernel.org/r/20180618125612.155057-1-edumazet@google.com
2018-06-19 09:19:40 +02:00
Linus Torvalds f4e5b30d80 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 updates and fixes from Thomas Gleixner:

 - Fix the (late) fallout from the vector management rework causing
   hlist corruption and irq descriptor reference leaks caused by a
   missing sanity check.

   The straight forward fix triggered another long standing issue to
   surface. The pre rework code hid the issue due to being way slower,
   but now the chance that user space sees an EBUSY error return when
   updating irq affinities is way higher, though quite a bunch of
   userspace tools do not handle it properly despite the fact that EBUSY
   could be returned for at least 10 years.

   It turned out that the EBUSY return can be avoided completely by
   utilizing the existing delayed affinity update mechanism for irq
   remapped scenarios as well. That's a bit more error handling in the
   kernel, but avoids fruitless fingerpointing discussions with tool
   developers.

 - Decouple PHYSICAL_MASK from AMD SME as its going to be required for
   the upcoming Intel memory encryption support as well.

 - Handle legacy device ACPI detection properly for newer platforms

 - Fix the wrong argument ordering in the vector allocation tracepoint

 - Simplify the IDT setup code for the APIC=n case

 - Use the proper string helpers in the MTRR code

 - Remove a stale unused VDSO source file

 - Convert the microcode update lock to a raw spinlock as its used in
   atomic context.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel_rdt: Enable CMT and MBM on new Skylake stepping
  x86/apic/vector: Print APIC control bits in debugfs
  genirq/affinity: Defer affinity setting if irq chip is busy
  x86/platform/uv: Use apic_ack_irq()
  x86/ioapic: Use apic_ack_irq()
  irq_remapping: Use apic_ack_irq()
  x86/apic: Provide apic_ack_irq()
  genirq/migration: Avoid out of line call if pending is not set
  genirq/generic_pending: Do not lose pending affinity update
  x86/apic/vector: Prevent hlist corruption and leaks
  x86/vector: Fix the args of vector_alloc tracepoint
  x86/idt: Simplify the idt_setup_apic_and_irq_gates()
  x86/platform/uv: Remove extra parentheses
  x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME
  x86: Mark native_set_p4d() as __always_inline
  x86/microcode: Make the late update update_lock a raw lock for RT
  x86/mtrr: Convert to use strncpy_from_user() helper
  x86/mtrr: Convert to use match_string() helper
  x86/vdso: Remove unused file
  x86/i8237: Register device based on FADT legacy boot flag
2018-06-10 09:44:53 -07:00
Thomas Gleixner 12f47073a4 genirq/affinity: Defer affinity setting if irq chip is busy
The case that interrupt affinity setting fails with -EBUSY can be handled
in the kernel completely by using the already available generic pending
infrastructure.

If a irq_chip::set_affinity() fails with -EBUSY, handle it like the
interrupts for which irq_chip::set_affinity() can only be invoked from
interrupt context. Copy the new affinity mask to irq_desc::pending_mask and
set the affinity pending bit. The next raised interrupt for the affected
irq will check the pending bit and try to set the new affinity from the
handler. This avoids that -EBUSY is returned when an affinity change is
requested from user space and the previous change has not been cleaned
up. The new affinity will take effect when the next interrupt is raised
from the device.

Fixes: dccfe3147b ("x86/vector: Simplify vector move cleanup")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Song Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.819273597@linutronix.de
2018-06-06 15:18:22 +02:00
Thomas Gleixner d340ebd696 genirq/migration: Avoid out of line call if pending is not set
The upcoming fix for the -EBUSY return from affinity settings requires to
use the irq_move_irq() functionality even on irq remapped interrupts. To
avoid the out of line call, move the check for the pending bit into an
inline helper.

Preparatory change for the real fix. No functional change.

Fixes: dccfe3147b ("x86/vector: Simplify vector move cleanup")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Link: https://lkml.kernel.org/r/20180604162224.471925894@linutronix.de
2018-06-06 15:18:20 +02:00
Thomas Gleixner a33a5d2d16 genirq/generic_pending: Do not lose pending affinity update
The generic pending interrupt mechanism moves interrupts from the interrupt
handler on the original target CPU to the new destination CPU. This is
required for x86 and ia64 due to the way the interrupt delivery and
acknowledge works if the interrupts are not remapped.

However that update can fail for various reasons. Some of them are valid
reasons to discard the pending update, but the case, when the previous move
has not been fully cleaned up is not a legit reason to fail.

Check the return value of irq_do_set_affinity() for -EBUSY, which indicates
a pending cleanup, and rearm the pending move in the irq dexcriptor so it's
tried again when the next interrupt arrives.

Fixes: 996c591227d9 ("x86/irq: Plug vector cleanup race")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Song Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.386544292@linutronix.de
2018-06-06 15:18:19 +02:00
Sebastian Andrzej Siewior 47b82e8818 ide: don't enable/disable interrupts in force threaded-IRQ mode
The interrupts are enabled/disabled so the interrupt handler can run
with enabled interrupts while serving the interrupt and not lose other
interrupts especially the timer tick.
If the system runs with force-threaded interrupts then there is no need
to enable the interrupts.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05 16:26:47 -04:00
Linus Torvalds db020be9f7 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:

 - Consolidation of softirq pending:

   The softirq mask and its accessors/mutators have many implementations
   scattered around many architectures. Most do the same things
   consisting in a field in a per-cpu struct (often irq_cpustat_t)
   accessed through per-cpu ops. We can provide instead a generic
   efficient version that most of them can use. In fact s390 is the only
   exception because the field is stored in lowcore.

 - Support for level!?! triggered MSI (ARM)

   Over the past couple of years, we've seen some SoCs coming up with
   ways of signalling level interrupts using a new flavor of MSIs, where
   the MSI controller uses two distinct messages: one that raises a
   virtual line, and one that lowers it. The target MSI controller is in
   charge of maintaining the state of the line.

   This allows for a much simplified HW signal routing (no need to have
   hundreds of discrete lines to signal level interrupts if you already
   have a memory bus), but results in a departure from the current idea
   the kernel has of MSIs.

 - Support for Meson-AXG GPIO irqchip

 - Large stm32 irqchip rework (suspend/resume, hierarchical domains)

 - More SPDX conversions

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  ARM: dts: stm32: Add exti support to stm32mp157 pinctrl
  ARM: dts: stm32: Add exti support for stm32mp157c
  pinctrl/stm32: Add irq_eoi for stm32gpio irqchip
  irqchip/stm32: Add suspend/resume support for hierarchy domain
  irqchip/stm32: Add stm32mp1 support with hierarchy domain
  irqchip/stm32: Prepare common functions
  irqchip/stm32: Add host and driver data structures
  irqchip/stm32: Add suspend support
  irqchip/stm32: Add falling pending register support
  irqchip/stm32: Checkpatch fix
  irqchip/stm32: Optimizes and cleans up stm32-exti irq_domain
  irqchip/meson-gpio: Add support for Meson-AXG SoCs
  dt-bindings: interrupt-controller: New binding for Meson-AXG SoC
  dt-bindings: interrupt-controller: Fix the double quotes
  softirq/s390: Move default mutators of overwritten softirq mask to s390
  softirq/x86: Switch to generic local_softirq_pending() implementation
  softirq/sparc: Switch to generic local_softirq_pending() implementation
  softirq/powerpc: Switch to generic local_softirq_pending() implementation
  softirq/parisc: Switch to generic local_softirq_pending() implementation
  softirq/ia64: Switch to generic local_softirq_pending() implementation
  ...
2018-06-04 19:59:22 -07:00
Christoph Hellwig 3f3942aca6 proc: introduce proc_create_single{,_data}
Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.

All trivial callers converted over.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16 07:23:35 +02:00
Marc Zyngier 0be8153cbc genirq/msi: Allow level-triggered MSIs to be exposed by MSI providers
So far, MSIs have been used to signal edge-triggered interrupts, as
a write is a good model for an edge (you can't "unwrite" something).
On the other hand, routing zillions of wires in an SoC because you
need level interrupts is a bit extreme.

People have come up with a variety of schemes to support this, which
involves sending two messages: one to signal the interrupt, and one
to clear it. Since the kernel cannot represent this, we've ended up
with side-band mechanisms that are pretty awful.

Instead, let's acknoledge the requirement, and ensure that, under the
right circumstances, the irq_compose_msg and irq_write_msg can take
as a parameter an array of two messages instead of a pointer to a
single one. We also add some checking that the compose method only
clobbers the second message if the MSI domain has been created with
the MSI_FLAG_LEVEL_CAPABLE flags.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lkml.kernel.org/r/20180508121438.11301-2-marc.zyngier@arm.com
2018-05-13 15:58:59 +02:00
Bartosz Golaszewski 275220ca6e genirq/irq_sim: Remove the license boilerplate
There is the SPDX license identifier now in the irq simulator. Remove the
license boilerplate.

While at it: update the copyright notice, since I did some changes in 2018.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180426200747.8344-1-brgl@bgdev.pl
2018-04-26 22:26:39 +02:00
Ming Lei d3056812e7 genirq/affinity: Spread irq vectors among present CPUs as far as possible
Commit 84676c1f21 ("genirq/affinity: assign vectors to all possible CPUs")
tried to spread the interrupts accross all possible CPUs to make sure that
in case of phsyical hotplug (e.g. virtualization) the CPUs which get
plugged in after the device was initialized are targeted by a hardware
queue and the corresponding interrupt.

This has a downside in cases where the ACPI tables claim that there are
more possible CPUs than present CPUs and the number of interrupts to spread
out is smaller than the number of possible CPUs. These bogus ACPI tables
are unfortunately not uncommon.

In such a case the vector spreading algorithm assigns interrupts to CPUs
which can never be utilized and as a consequence these interrupts are
unused instead of being mapped to present CPUs. As a result the performance
of the device is suboptimal.

To fix this spread the interrupt vectors in two stages:

 1) Spread as many interrupts as possible among the present CPUs

 2) Spread the remaining vectors among non present CPUs

On a 8 core system, where CPU 0-3 are present and CPU 4-7 are not present,
for a device with 4 queues the resulting interrupt affinity is:

  1) Before 84676c1f21 ("genirq/affinity: assign vectors to all possible CPUs")
	irq 39, cpu list 0
	irq 40, cpu list 1
	irq 41, cpu list 2
	irq 42, cpu list 3

  2) With 84676c1f21 ("genirq/affinity: assign vectors to all possible CPUs")
	irq 39, cpu list 0-2
	irq 40, cpu list 3-4,6
	irq 41, cpu list 5
	irq 42, cpu list 7

  3) With the refined vector spread applied:
	irq 39, cpu list 0,4
	irq 40, cpu list 1,6
	irq 41, cpu list 2,5
	irq 42, cpu list 3,7

On a 8 core system, where all CPUs are present the resulting interrupt
affinity for the 4 queues is:

	irq 39, cpu list 0,1
	irq 40, cpu list 2,3
	irq 41, cpu list 4,5
	irq 42, cpu list 6,7

This is independent of the number of CPUs which are online at the point of
initialization because in such a system the offline CPUs can be easily
onlined afterwards, while in non-present CPUs need to be plugged physically
or virtually which requires external interaction.

The downside of this approach is that in case of physical hotplug the
interrupt vector spreading might be suboptimal when CPUs 4-7 are physically
plugged. Suboptimal from a NUMA point of view and due to the single target
nature of interrupt affinities the later plugged CPUs might not be targeted
by interrupts at all.

Though, physical hotplug systems are not the common case while the broken
ACPI table disease is wide spread. So it's preferred to have as many
interrupts as possible utilized at the point where the device is
initialized.

Block multi-queue devices like NVME create a hardware queue per possible
CPU, so the goal of commit 84676c1f21 to assign one interrupt vector per
possible CPU is still achieved even with physical/virtual hotplug.

[ tglx: Changed from online to present CPUs for the first spreading stage,
  	renamed variables for readability sake, added comments and massaged
  	changelog ]

Reported-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Link: https://lkml.kernel.org/r/20180308105358.1506-5-ming.lei@redhat.com
2018-04-06 12:19:51 +02:00
Ming Lei 1a2d0914e2 genirq/affinity: Allow irq spreading from a given starting point
To support two stage irq vector spreading, it's required to add a starting
point to the spreading function. No functional change, just preparatory
work for the actual two stage change.

[ tglx: Renamed variables, tidied up the code and massaged changelog ]

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Link: https://lkml.kernel.org/r/20180308105358.1506-4-ming.lei@redhat.com
2018-04-06 12:19:51 +02:00
Ming Lei b3e6aaa8d9 genirq/affinity: Move actual irq vector spreading into a helper function
No functional change, just prepare for converting to 2-stage irq vector
spreading.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Link: https://lkml.kernel.org/r/20180308105358.1506-3-ming.lei@redhat.com
2018-04-06 12:19:51 +02:00
Ming Lei 47778f33dc genirq/affinity: Rename *node_to_possible_cpumask as *node_to_cpumask
The following patches will introduce two stage irq spreading for improving
irq spread on all possible CPUs.

No functional change.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Link: https://lkml.kernel.org/r/20180308105358.1506-2-ming.lei@redhat.com
2018-04-06 12:19:50 +02:00
Thomas Gleixner 0211e12dd0 genirq/affinity: Don't return with empty affinity masks on error
When the allocation of node_to_possible_cpumask fails, then
irq_create_affinity_masks() returns with a pointer to the empty affinity
masks array, which will cause malfunction.

Reorder the allocations so the masks array allocation comes last and every
failure path returns NULL.

Fixes: 9a0ef98e18 ("genirq/affinity: Assign vectors to all present CPUs")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
2018-04-06 12:19:50 +02:00
Palmer Dabbelt d6f73825dc genirq: Make GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER
These config switches enable the same code in the core and the not yet
converted architecture code. They can be selected both by randconfig builds
and cause linker error because the same symbols are defined twice.

Make the new GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER to
prevent that. The dependency will be removed once all architectures are
converted over.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20180404043130.31277-4-palmer@sifive.com
2018-04-04 12:04:28 +02:00
Thomas Gleixner f3f59fbc54 genirq: Remove license boilerplate/references
Now that SPDX identifiers are in place, remove the boilerplate or
references.

The change in timings.c has been acked by the author.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.668321222@linutronix.de
2018-03-20 14:23:28 +01:00
Thomas Gleixner 52a65ff560 genirq: Add missing SPDX identifiers
Add SPDX identifiers to files

 - which contain an explicit license boiler plate or reference

 - which do not contain a license reference and were not updated in the
   initial SPDX conversion because the license was deduced by the scanners
   via EXPORT_SYMBOL_GPL as GPL2.0 only.

[ tglx: Moved adding identifiers from the patch which removes the
  	references/boilerplate ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.668321222@linutronix.de
2018-03-20 14:23:28 +01:00
Thomas Gleixner 90cafdd521 genirq/matrix: Cleanup SPDX identifier
Use the proper SPDX-Identifier format.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.492674761@linutronix.de
2018-03-20 14:23:28 +01:00
Thomas Gleixner 99bfce5db9 genirq: Cleanup top of file comments
Remove pointless references to the file name itself and condense the
information so it wastes less space.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.412095827@linutronix.de
2018-03-20 14:23:27 +01:00
Uwe Kleine König 83ac4ca943 genirq: Pass desc to __irq_free instead of irq number
Given that irq_to_desc() is a radix_tree_lookup and the reverse
operation is only a pointer dereference and that all callers of
__free_irq already have the desc, pass the desc instead of the irq
number.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel@pengutronix.de
Link: https://lkml.kernel.org/r/20180319105202.9794-1-u.kleine-koenig@pengutronix.de
2018-03-20 08:52:44 +01:00
Palmer Dabbelt caacdbf4aa genirq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER
The arm multi irq handler registration mechanism has been copied into a
handful of architectures, including arm64 and openrisc. RISC-V needs the
same mechanism.

Instead of adding yet another copy for RISC-V copy the arm implementation
into the core code depending on a new Kconfig symbol:
CONFIG_GENERIC_MULTI_IRQ_HANDLER.

Subsequent patches will convert the various architectures.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: jonas@southpole.se
Cc: catalin.marinas@arm.com
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux@armlinux.org.uk
Cc: stefan.kristiansson@saunalahti.fi
Cc: openrisc@lists.librecores.org
Cc: shorne@gmail.com
Cc: linux-riscv@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/20180307235731.22627-2-palmer@sifive.com
2018-03-14 21:46:29 +01:00
Thomas Gleixner b0d8bef8ed Merge branch 'linus' into irq/core to pick up dependencies. 2018-03-14 20:37:31 +01:00
Bartosz Golaszewski f09777fa89 genirq/irq_sim: Return the base of the irq range from irq_sim_init()
Returning the base of the allocated interrupt range from irq_sim_init() and
devm_irq_sim_init() allows users to handle the logic of associating irq
numbers with any other driver-specific resources without having to use
irq_sim_irqnum().

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20180304121018.640-4-brgl@bgdev.pl
2018-03-09 11:44:03 +01:00
Bartosz Golaszewski 28b6afa7d4 genirq/irq_sim: Check the return value of irq_sim_init() for error codes
As discussed with Marc Zyngier: irq_sim_init() and its devres variant
should return the base of the allocated interrupt range on success rather
than 0.

Make devm_irq_sim_init() check for an error code. This is a preparatory
change for modifying irq_sim_init() itself.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20180304121018.640-3-brgl@bgdev.pl
2018-03-09 11:44:03 +01:00
Bartosz Golaszewski 34a866bd45 genirq/irq_sim: Explicitly include slab.h
kfree() is used in the irq_sim code but slab.h is pulled in indirectly via
irq.h. Include it explicitly.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20180304121018.640-2-brgl@bgdev.pl
2018-03-09 11:44:03 +01:00
Andy Shevchenko d61e2944b6 genirq: Add wakeup sysfs node to show IRQ wakeup state
Surprisingly there is no simple way to see if the IRQ line in question
is wakeup source or not.

Note that wakeup might be an OOB (out-of-band) source like GPIO line
which makes things slightly more complicated.

Add a sysfs node to cover this case.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tony Lindgren <tony@atomide.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20180226155043.67937-1-andriy.shevchenko@linux.intel.com
2018-02-28 18:07:20 +01:00
Thomas Gleixner 651ca2c004 genirq/matrix: Handle CPU offlining proper
At CPU hotunplug the corresponding per cpu matrix allocator is shut down and
the allocated interrupt bits are discarded under the assumption that all
allocated bits have been either migrated away or shut down through the
managed interrupts mechanism.

This is not true because interrupts which are not started up might have a
vector allocated on the outgoing CPU. When the interrupt is started up
later or completely shutdown and freed then the allocated vector is handed
back, triggering warnings or causing accounting issues which result in
suspend failures and other issues.

Change the CPU hotplug mechanism of the matrix allocator so that the
remaining allocations at unplug time are preserved and global accounting at
hotplug is correctly readjusted to take the dormant vectors into account.

Fixes: 2f75d9e1c9 ("genirq: Implement bitmap matrix allocator")
Reported-by: Yuriy Vostrikov <delamonpansie@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yuriy Vostrikov <delamonpansie@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180222112316.849980972@linutronix.de
2018-02-22 22:05:43 +01:00
Thomas Gleixner cbf8699996 genirq: Let irq thread follow the effective hard irq affinity
In case of threaded interrupts the thread follows the affinity setting of
the hard interrupt. The related function uses the affinity mask which was
set by either from user space or via one of the kernel mechanisms. This
mask can be wider than the resulting effective affinity of the hard
interrupt. As a consequence the thread might become affine to a completely
different CPU.

Use the effective interrupt affinity if the architecture supports it, so
the hard interrupt and the thread stay on the same CPU.

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2018-02-16 15:28:50 +01:00
Andy Shevchenko 0b24a0bbe2 irqdomain: Re-use DEFINE_SHOW_ATTRIBUTE() macro
...instead of open coding file operations followed by custom ->open()
callbacks per each attribute.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-02-16 14:22:34 +00:00
Sergey Senozhatsky 22ad305741 genirq: remove unneeded kallsyms include
The file was converted from print_symbol() to %pf some time ago in
commit ef26f20cd1 ("genirq: Print threaded handler in spurious debug
output").  kallsyms does not seem to be needed anymore.

Link: http://lkml.kernel.org/r/20171208025616.16267-10-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:47 -08:00
Linus Torvalds f74a127f66 Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
 "Two small changes:

   - a fix for a interrupt regression caused by the vector management
     changes in 4.15 affecting museum pieces which rely on interrupt
     probing for legacy (e.g. parallel port) devices.

     One of the startup calls in the autoprobe code was not changed to
     the new activate_and_startup() function resulting in a warning and
     as a consequence failing to discover the device interrupt.

   - a trivial update to the copyright/license header of the STM32 irq
     chip driver"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Make legacy autoprobing work again
  irqchip/stm32: Fix copyright
2018-02-04 11:41:31 -08:00