Commit Graph

46 Commits

Author SHA1 Message Date
Bob Peterson 39b0f1e929 GFS2: Don't brelse rgrp buffer_heads every allocation
This patch allows the block allocation code to retain the buffers
for the resource groups so they don't need to be re-read from buffer
cache with every request. This is a performance improvement that's
especially noticeable when resource groups are very large. For
example, with 2GB resource groups and 4K blocks, there can be 33
blocks for every resource group. This patch allows those 33 buffers
to be kept around and not read in and thrown away with every
operation. The buffers are released when the resource group is
either synced or invalidated.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
2015-06-19 07:40:22 -05:00
Abhi Das 25435e5ed6 gfs2: allow quota_check and inplace_reserve to return available blocks
struct gfs2_alloc_parms is passed to gfs2_quota_check() and
gfs2_inplace_reserve() with ap->target containing the number of
blocks being requested for allocation in the current operation.

We add a new field to struct gfs2_alloc_parms called 'allowed'.
gfs2_quota_check() and gfs2_inplace_reserve() return the max
blocks allowed by quota and the max blocks allowed by the chosen
rgrp respectively in 'allowed'.

A new field 'min_target', when non-zero, tells gfs2_quota_check()
and gfs2_inplace_reserve() to not return -EDQUOT/-ENOSPC when
there are atleast 'min_target' blocks allowable/available. The
assumption is that the caller is ok with just 'min_target' blocks
and will likely proceed with allocating them.

Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2015-03-18 12:47:10 -05:00
Bob Peterson 1a8550332a GFS2: If we use up our block reservation, request more next time
If we run out of blocks for a given multi-block allocation, we obviously
did not reserve enough. We should reserve more blocks for the next
reservation to reduce fragmentation. This patch increases the size hint
for reservations when they run out.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-03 19:26:54 +00:00
Abhi Das 00a158be83 GFS2: fix bad inode i_goal values during block allocation
This patch checks if i_goal is either zero or if doesn't exist
within any rgrp (i.e gfs2_blk2rgrpd() returns NULL). If so, it
assigns the ip->i_no_addr block as the i_goal.

There are two scenarios where a bad i_goal can result in a
-EBADSLT error.

1. Attempting to allocate to an existing inode:
Control reaches gfs2_inplace_reserve() and ip->i_goal is bad.
We need to fix i_goal here.

2. A new inode is created in a directory whose i_goal is hosed:
In this case, the parent dir's i_goal is copied onto the new
inode. Since the new inode is not yet created, the ip->i_no_addr
field is invalid and so, the fix in gfs2_inplace_reserve() as per
1) won't work in this scenario. We need to catch and fix it sooner
in the parent dir itself (gfs2_create_inode()), before it is
copied to the new inode.

Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-09-19 10:45:18 +01:00
Steven Whitehouse ac3beb6a5d GFS2: Don't use ENOBUFS when ENOMEM is the correct error code
Al Viro has tactfully pointed out that we are using the incorrect
error code in some cases. This patch fixes that, and also removes
the (unused) return value for glock dumping.

>        * gfs2_iget() - ENOBUFS instead of ENOMEM.  ENOBUFS is
> "No buffer space available (POSIX.1 (XSI STREAMS option))" and since
> we don't support STREAMS it's probably fair game, but... what the hell?

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
2014-01-16 10:31:13 +00:00
Steven Whitehouse 7b9cff4671 GFS2: Add allocation parameters structure
This patch adds a structure to contain allocation parameters with
the intention of future expansion of this structure. The idea is
that we should be able to add more information about the allocation
in the future in order to allow the allocator to make a better job
of placing the requests on-disk.

There is no functional difference from applying this patch.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-10-02 11:13:25 +01:00
Steven Whitehouse af5c269799 GFS2: Clean up reservation removal
The reservation for an inode should be cleared when it is truncated so
that we can start again at a different offset for future allocations.
We could try and do better than that, by resetting the search based on
where the truncation started from, but this is only a first step.

In addition, there are three callers of gfs2_rs_delete() but only one
of those should really be testing the value of i_writecount. While
we get away with that in the other cases currently, I think it would
be better if we made that test specific to the one case which
requires it.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-09-27 12:49:33 +01:00
Bob Peterson 20095218fb GFS2: Remove vestigial parameter ip from function rs_deltree
The functions that delete block reservations from the rgrp block
reservations rbtree no longer use the ip parameter. This patch
eliminates the parameter.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-04-08 08:41:04 +01:00
Steven Whitehouse 9dbe9610b9 GFS2: Add Orlov allocator
Just like ext3, this works on the root directory and any directory
with the +T flag set. Also, just like ext3, any subdirectory created
in one of the just mentioned cases will be allocated to a random
resource group (GFS2 equivalent of a block group).

If you are creating a set of directories, each of which will contain a
job running on a different node, then by setting +T on the parent
directory before creating the subdirectories, each will land up in a
different resource group, and thus resource group contention between
nodes will be kept to a minimum.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-07 13:33:17 +00:00
Steven Whitehouse ff7f4cb461 GFS2: Consolidate free block searching functions
With the recently added block reservation code, an additional function
was added to search for free blocks. This had a restriction of only being
able to search for aligned extents of free blocks. As a result the
allocation patterns when reserving blocks were suboptimal when the
existing allocation of blocks for an inode was not aligned to the same
boundary.

This patch resolves that problem by adding the ability for gfs2_rbm_find
to search for extents of a particular minimum size. We can then use
gfs2_rbm_find for both looking for reservations, and also looking for
free blocks on an individual basis when we actually come to do the
allocation later on. As a result we only need a single set of code
to deal with both situations.

The function gfs2_rbm_from_block() is moved up rgrp.c so that it
occurs before all of its callers.

Many thanks are due to Bob for helping track down the final issue in
this patch. That fix to the rb_tree traversal and to not share
block reservations from a dirctory to its children is included here.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2012-09-24 10:47:26 +01:00
Steven Whitehouse 4a993fb150 GFS2: Add structure to contain rgrp, bitmap, offset tuple
This patch introduces a new structure, gfs2_rbm, which is a
tuple of a resource group, a bitmap within the resource group
and an offset within that bitmap. This is designed to make
manipulating these sets of variables easier. There is also a
new helper function which converts this representation back
to a disk block address.

In addition, the rbtree nodes which are used for the reservations
were not being correctly initialised, which is now fixed. Also,
the tracing was not passing through the inode where it should
have been. That is mostly fixed aside from one corner case. This
needs to be revisited since there can also be a NULL rgrp in
some cases which results in the device being incorrect in the
trace.

This is intended to be the first step towards cleaning up some
of the allocation code, and some further bug fixes.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24 10:46:56 +01:00
Steven Whitehouse 71f890f7f7 GFS2: Remove rs_requested field from reservations
The rs_requested field is left over from the original allocation
code, however this should have been a parameter passed to the
various functions from gfs2_inplace_reserve() and not a member of the
reservation structure as the value is not required after the
initial allocation.

This also helps simplify the code since we no longer need to set
the rs_requested to zero. Also the gfs2_inplace_release()
function can also be simplified since the reservation structure
will always be defined when it is called, and the only remaining
task is to unlock the rgrp if required. It can also now be
called unconditionally too, resulting in a further simplification.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24 10:46:54 +01:00
Bob Peterson 8e2e004735 GFS2: Reduce file fragmentation
This patch reduces GFS2 file fragmentation by pre-reserving blocks. The
resulting improved on disk layout greatly speeds up operations in cases
which would have resulted in interlaced allocation of blocks previously.
A typical example of this is 10 parallel dd processes, each writing to a
file in a common dirctory.

The implementation uses an rbtree of reservations attached to each
resource group (and each inode).

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-07-19 14:51:08 +01:00
Bob Peterson 5407e24229 GFS2: Fold quota data into the reservations struct
This patch moves the ancillary quota data structures into the
block reservations structure. This saves GFS2 some time and
effort in allocating and deallocating the qadata structure.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-06-06 11:20:22 +01:00
Bob Peterson 0a305e4960 GFS2: Extend the life of the reservations
This patch lengthens the lifespan of the reservations structure for
inodes. Before, they were allocated and deallocated for every write
operation. With this patch, they are allocated when the first write
occurs, and deallocated when the last process closes the file.
It's more efficient to do it this way because it saves GFS2 a lot of
unnecessary allocates and frees. It also gives us more flexibility
for the future: (1) we can now fold the qadata structure back into
the structure and save those alloc/frees, (2) we can use this for
multi-block reservations.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-06-06 11:17:59 +01:00
Steven Whitehouse 66fc061bda GFS2: FITRIM ioctl support
The FITRIM ioctl provides an alternative way to send discard requests to
the underlying device. Using the discard mount option results in every
freed block generating a discard request to the block device. This can
be slow, since many block devices can only process discard requests of
larger sizes, and also such operations can be time consuming.

Rather than using the discard mount option, FITRIM allows a sweep of the
filesystem on an occasional basis, and also to optionally avoid sending
down discard requests for smaller regions.

In GFS2 FITRIM will work at resource group granularity. There is a flag
for each resource group which keeps track of which resource groups have
been trimmed. This flag is reset whenever a deallocation occurs in the
resource group, and set whenever a successful FITRIM of that resource
group has taken place. This helps to reduce repeated discard requests
for the same block ranges, again improving performance.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28 17:10:21 +00:00
Bob Peterson 564e12b115 GFS2: decouple quota allocations from block allocations
This patch separates the code pertaining to allocations into two
parts: quota-related information and block reservations.
This patch also moves all the block reservation structure allocations to
function gfs2_inplace_reserve to simplify the code, and moves
the frees to function gfs2_inplace_release.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-22 10:25:21 +00:00
Bob Peterson 6e87ed0fc9 GFS2: move toward a generic multi-block allocator
This patch is a revision of the one I previously posted.
I tried to integrate all the suggestions Steve gave.
The purpose of the patch is to change function gfs2_alloc_block
(allocate either a dinode block or an extent of data blocks)
to a more generic gfs2_alloc_blocks function that can
allocate both a dinode _and_ an extent of data blocks in the
same call. This will ultimately help us create a multi-block
reservation scheme to reduce file fragmentation.

This patch moves more toward a generic multi-block allocator that
takes a pointer to the number of data blocks to allocate, plus whether
or not to allocate a dinode. In theory, it could be called to allocate
(1) a single dinode block, (2) a group of one or more data blocks, or
(3) a dinode plus several data blocks.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-21 10:04:09 +00:00
Bob Peterson 3c5d785acf GFS2: combine gfs2_alloc_block and gfs2_alloc_di
GFS2 functions gfs2_alloc_block and gfs2_alloc_di do basically
the same things, with a few exceptions. This patch combines
the two functions into a slightly more generic gfs2_alloc_block.
Having one centralized block allocation function will reduce
code redundancy and make it easier to implement multi-block
reservations to reduce file fragmentation in the future.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-15 15:25:03 +00:00
Steven Whitehouse 9ae32429fe GFS2: Remove two unused variables
The two variables being initialised in gfs2_inplace_reserve
to track the file & line number of the caller are never
used, so we might as well remove them.

If something does go wrong, then a stack trace is probably
more useful anyway.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:52 +01:00
Steven Whitehouse 70b0c3656f GFS2: Use cached rgrp in gfs2_rlist_add()
Each block which is deallocated, requires a call to gfs2_rlist_add()
and each of those calls was calling gfs2_blk2rgrpd() in order to
figure out which rgrp the block belonged in. This can be speeded up
by making use of the rgrp cached in the inode. We also reset this
cached rgrp in case the block has changed rgrp. This should provide
a big reduction in gfs2_blk2rgrpd() calls during deallocation.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:39 +01:00
Steven Whitehouse 8339ee543e GFS2: Make resource groups "append only" during life of fs
Since we have ruled out supporting online filesystem shrink,
it is possible to make the resource group list append only
during the life of a super block. This gives several benefits:

Firstly, we only need to read new rindex elements as they are added
rather than needing to reread the whole rindex file each time one
element is added.

Secondly, the rindex glock can be held for much shorter periods of
time, and is completely removed from the fast path for allocations.
The lock is taken in shared mode only when updating the resource
groups when the first allocation occurs, and after a grow has
taken place.

Thirdly, this results in a reduction in code size, and everything
gets a lot simpler to understand in this area.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:33 +01:00
Bob Peterson 7c9ca62113 GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme
Here is an update of Bob's original rbtree patch which, in addition, also
resolves the rather strange ref counting that was being done relating to
the bitmap blocks.

Originally we had a dual system for journaling resource groups. The metadata
blocks were journaled and also the rgrp itself was added to a list. The reason
for adding the rgrp to the list in the journal was so that the "repolish
clones" code could be run to update the free space, and potentially send any
discard requests when the log was flushed. This was done by comparing the
"cloned" bitmap with what had been written back on disk during the transaction
commit.

Due to this, there was a requirement to hang on to the rgrps' bitmap buffers
until the journal had been flushed. For that reason, there was a rather
complicated set up in the ->go_lock ->go_unlock functions for rgrps involving
both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference
count on the buffers.

However, the journal maintains a reference count on the buffers anyway, since
they are being journaled as metadata buffers. So by moving the code which deals
with the post-journal accounting for bitmap blocks to the metadata journaling
code, we can entirely dispense with the rather strange buffer ref counting
scheme and also the requirement to journal the rgrps.

The net result of all this is that the ->sd_rindex_spin is left to do exactly
one job, and that is to look after the rbtree or rgrps.

This patch is designed to be a stepping stone towards using RCU for the rbtree
of resource groups, however the reduction in the number of uses of the
->sd_rindex_spin is likely to have benefits for multi-threaded workloads,
anyway.

The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also
be removed in future in favour of calling the functions directly where required
in the code. That will allow locking of resource groups without needing to
actually read them in - something that could be useful in speeding up statfs.

In the mean time though it is valid to dereference ->bi_bh only when the rgrp
is locked. This is basically the same rule as before, modulo the references not
being valid until the following journal flush.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-10-21 12:39:31 +01:00
Eric Sandeen 46fcb2ed29 GFS2: combine duplicated block freeing routines
__gfs2_free_data and __gfs2_free_meta are almost identical, and
can be trivially combined.

[This is as per Eric's original patch minus gfs2_free_data() which had
 no callers left and plus the conversion of the bmap.c calls to these
 functions. All in all, a nice clean up]

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-07-15 09:32:52 +01:00
Bob Peterson 4c16c36ad6 GFS2: deallocation performance patch
This patch is a performance improvement to GFS2's dealloc code.
Rather than update the quota file and statfs file for every
single block that's stripped off in unlink function do_strip,
this patch keeps track and updates them once for every layer
that's stripped.  This is done entirely inside the existing
transaction, so there should be no risk of corruption.
The other functions that deallocate blocks will be unaffected
because they are using wrapper functions that do the same
thing that they do today.

I tested this code on my roth cluster by creating 200
files in a directory, each of which is 100MB, then on
four nodes, I simultaneously deleted the files, thus competing
for GFS2 resources (but different files).  The commands
I used were:

[root@roth-01]# time for i in `seq 1 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done
[root@roth-02]# time for i in `seq 2 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done
[root@roth-03]# time for i in `seq 3 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done
[root@roth-05]# time for i in `seq 4 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done

The performance increase was significant:

             roth-01     roth-02     roth-03     roth-05
             ---------   ---------   ---------   ---------
old: real    0m34.027    0m25.021s   0m23.906s   0m35.646s
new: real    0m22.379s   0m24.362s   0m24.133s   0m18.562s

Total time spent deleting:
old: 118.6s
new:  89.4

For this particular case, this showed a 25% performance increase for
GFS2 unlinks.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-02-24 12:13:48 +00:00
Benjamin Marzinski 086d8334cf GFS2: fix recursive locking during rindex truncates
When you truncate the rindex file, you need to avoid calling gfs2_rindex_hold,
since you already hold it.  However, if you haven't already read in the
resource groups, you need to do that.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-11-30 15:41:54 +00:00
Bob Peterson 46290341cd GFS2 fatal: filesystem consistency error on rename
This patch fixes a GFS2 problem whereby the first rename after a
mount can result in a file system consistency error being flagged
improperly and cause the file system to withdraw.  The problem is
that the rename code tries to run the rgrp list with function
gfs2_blk2rgrpd before the rgrp list is guaranteed to be read in
from disk.  The patch makes the rename function hold the rindex
glock (as the gfs2_unlink code does today) which reads in the rgrp
list if need be.  There were a total of three places in the rename
code that improperly referenced the rgrp list without the rindex
glock and this patch fixes all three.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-09-30 17:23:03 +01:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Steven Whitehouse acf7e2444a GFS2: Be extra careful about deallocating inodes
There is a potential race in the inode deallocation code if two
nodes try to deallocate the same inode at the same time. Most of
the issue is solved by the iopen locking. There is still a small
window which is not covered by the iopen lock. This patches fixes
that and also makes the deallocation code more robust in the face of
any errors in the rgrp bitmaps, or erroneous iopen callbacks from
other nodes.

This does introduce one extra disk read, but that is generally not
an issue since its the same block that must be written to later
in the deallocation process. The total disk accesses therefore stay
the same,

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-09-08 18:00:30 +01:00
Steven Whitehouse 6050b9c74f GFS2: Improve error handling in inode allocation
A little while back, block allocation was given some improved
error handling which meant that -EIO was returned in the case
of there being a problem in the resource group data. In addition
a message is printed explaning what went wrong and how to fix it.
This extends that error handling so that it also covers inode
allocation too.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-08-17 11:05:31 +01:00
Steven Whitehouse 0901097834 GFS2: Improve resource group error handling
This patch improves the error handling in the case where we
discover that the summary information in the resource group
doesn't match the bitmap information while in the process of
allocating blocks. Originally this resulted in a kernel bug,
but this patch changes that so that we return -EIO and print
some messages explaining what went wrong, and how to fix it.

We also remember locally not to try and allocate from the
same rgrp again, so that a subsequent allocation in a
different rgrp should succeed.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-05-20 10:48:47 +01:00
Steven Whitehouse b45e41d7d5 [GFS2] Add extent allocation to block allocator
Rather than having to allocate a single block at a time, this patch
allows the block allocator to allocate an extent. Since there is
no difference (so far as the block allocator is concerned) between
data blocks and indirect blocks, it is posible to allocate a single
extent and for the caller to unrevoke just the blocks required
for indirect blocks.

Currently the only bit of GFS2 to make use of this feature is the
build height function. The intention is that gfs2_block_map will
be changed to make use of this feature in future patches.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:47 +01:00
Steven Whitehouse 1639431a3f [GFS2] Merge gfs2_alloc_meta and gfs2_alloc_data
Thanks to the preceeding patches, the only difference between
these two functions is their name. We can thus merge them
and call the new function gfs2_alloc_block to reflect the
fact that it can allocate either kind of block.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:45 +01:00
Bob Peterson fe6c991c52 [GFS2] Get rid of unneeded parameter in gfs2_rlist_alloc
This patch removed the unnecessary parameter from function
gfs2_rlist_alloc.  The parameter was always passed in as 0.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:39:49 +01:00
Steven Whitehouse 6dbd822487 [GFS2] Reduce inode size by moving i_alloc out of line
It is possible to reduce the size of GFS2 inodes by taking the i_alloc
structure out of the gfs2_inode. This patch allocates the i_alloc
structure whenever its needed, and frees it afterward. This decreases
the amount of low memory we use at the expense of requiring a memory
allocation for each page or partial page that we write. A quick test
with postmark shows that the overhead is not measurable and I also note
that OCFS2 use the same approach.

In the future I'd like to solve the problem by shrinking down the size
of the members of the i_alloc structure, but for now, this reduces the
immediate problem of using too much low-memory on x86 and doesn't add
too much overhead.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:18:25 +00:00
Robert Peterson cd81a4bac6 [GFS2] Addendum patch 2 for gfs2_grow
This addendum patch 2 corrects three things:

1. It fixes a stupid mistake in the previous addendum that broke gfs2.
   Ref: https://www.redhat.com/archives/cluster-devel/2007-May/msg00162.html
2. It fixes a problem that Dave Teigland pointed out regarding the
   external declarations in ops_address.h being in the wrong place.
3. It recasts a couple more %llu printks to (unsigned long long)
   as requested by Steve Whitehouse.

I would have loved to put this all in one revised patch, but there was
a rush to get some patches for RHEL5.	Therefore, the previous patches
were applied to the git tree "as is" and therefore, I'm posting another
addendum.  Sorry.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:19 +01:00
Steven Whitehouse f5c54804d9 [GFS2] Fix uninitialised variable
This fixes a bug where, in certain cases an uninitialised variable
could cause a dereference of a NULL pointer in gfs2_commit_write().
Also a typo in a comment is fixed at the same time.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-12 17:10:15 -04:00
Steven Whitehouse 2c1e52aa90 [GFS2] More style fixes
As per Jan Engelhardt's follow up emails, here are a few small
fixes which were missed earlier.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-05 15:41:57 -04:00
Steven Whitehouse f2f7ba5237 [GFS2] Make headers compile on their own
As per Jan Engelhardt's comments, this should make all the headers
compile on their own by including and/or declaring structures
early.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-05 10:39:21 -04:00
Steven Whitehouse cd915493fc [GFS2] Change all types to uX style
This makes all fixed size types have consistent names.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-04 12:49:07 -04:00
Steven Whitehouse e9fc2aa091 [GFS2] Update copyright, tidy up incore.h
As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this
updates the copyright message to say "version" in full rather than
"v.2". Also incore.h has been updated to remove forward structure
declarations which are not required.

The gfs2_quota_lvb structure has now had endianess annotations added
to it. Also quota.c has been updated so that we now store the
lvb data locally in endian independant format to avoid needing
a structure in host endianess too. As a result the endianess
conversions are done as required at various points and thus the
conversion routines in lvb.[ch] are no longer required. I've
moved the one remaining constant in lvb.h thats used into lm.h
and removed the unused lvb.[ch].

I have not changed the HIF_ constants. That is left to a later patch
which I hope will unify the gh_flags and gh_iflags fields of the
struct gfs2_holder.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-01 11:05:15 -04:00
Steven Whitehouse 4340fe6253 [GFS2] Add generation number
This adds a generation number for the eventual use of NFS to the
ondisk inode. Its backward compatible with the current code since
it doesn't really matter what the generation number is to start with,
and indeed since its set to zero, due to it being taken from padding
in both the inode and rgrp header, it should be fine.

The eventual plan is to use this rather than no_formal_ino in the
NFS filehandles. At that point no_formal_ino will be unused.

At the same time we also add a releasepages call back to the
"normal" address space for gfs2 inodes. Also I've removed a
one-linrer function thats not required any more.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-07-11 09:46:33 -04:00
Adrian Bunk 43f5d210a0 [GFS2] [-mm patch] fs/gfs2/: make code static
This patch makes the following needlessly global code static:
- eaops.c: struct gfs2_security_eaops
- rgrp.c: gfs2_free_uninit_di()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-06-22 11:16:40 -04:00
Steven Whitehouse feaa7bba02 [GFS2] Fix unlinked file handling
This patch fixes the way we have been dealing with unlinked,
but still open files. It removes all limits (other than memory
for inodes, as per every other filesystem) on numbers of these
which we can support on GFS2. It also means that (like other
fs) its the responsibility of the last process to close the file
to deallocate the storage, rather than the person who did the
unlinking. Note that with GFS2, those two events might take place
on different nodes.

Also there are a number of other changes:

 o We use the Linux inode subsystem as it was intended to be
used, wrt allocating GFS2 inodes
 o The Linux inode cache is now the point which we use for
local enforcement of only holding one copy of the inode in
core at once (previous to this we used the glock layer).
 o We no longer use the unlinked "special" file. We just ignore it
completely. This makes unlinking more efficient.
 o We now use the 4th block allocation state. The previously unused
state is used to track unlinked but still open inodes.
 o gfs2_inoded is no longer needed
 o Several fields are now no longer needed (and removed) from the in
core struct gfs2_inode
 o Several fields are no longer needed (and removed) from the in core
superblock

There are a number of future possible optimisations and clean ups
which have been made possible by this patch.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-06-14 15:32:57 -04:00
Steven Whitehouse 3a8a9a1034 [GFS2] Update copyright date to 2006
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-18 15:09:15 -04:00
David Teigland b3b94faa5f [GFS2] The core of GFS2
This patch contains all the core files for GFS2.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00