Commit Graph

173 Commits

Author SHA1 Message Date
Linus Torvalds f74b944419 Merge branch 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  BKL: That's all, folks
  fs/locks.c: Remove stale FIXME left over from BKL conversion
  ipx: remove the BKL
  appletalk: remove the BKL
  x25: remove the BKL
  ufs: remove the BKL
  hpfs: remove the BKL
  drivers: remove extraneous includes of smp_lock.h
  tracing: don't trace the BKL
  adfs: remove the big kernel lock
2011-03-16 17:21:00 -07:00
Al Viro 37750cdda3 ufs: i_nlink races in rename()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-03 01:28:16 -05:00
Arnd Bergmann 788257d610 ufs: remove the BKL
This introduces a new per-superblock mutex in UFS to replace
the big kernel lock. I have been careful to avoid nested
calls to lock_ufs and to get the lock order right with
respect to other mutexes, in particular lock_super.

I did not make any attempt to prove that the big kernel
lock is not needed in a particular place in the code,
which is very possible.

The mutex has a significant performance impact, so it is only
used on SMP or PREEMPT configurations.

As Nick Piggin noticed, any allocation inside of the lock
may end up deadlocking when we get to ufs_getfrag_block
in the reclaim task, so we now use GFP_NOFS.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nick Bowler <nbowler@elliptictech.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Nick Piggin <npiggin@gmail.com>
2011-03-02 22:27:48 +01:00
Nick Piggin fa0d7e3de6 fs: icache RCU free inodes
RCU free the struct inode. This will allow:

- Subsequent store-free path walking patch. The inode must be consulted for
  permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
  to take i_lock no longer need to take sb_inode_list_lock to walk the list in
  the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
  page lock to follow page->mapping.

The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.

In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.

The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:26 +11:00
Al Viro 152a083666 new helper: mount_bdev()
... and switch of the obvious get_sb_bdev() users to ->mount()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29 04:16:13 -04:00
Al Viro 7de9c6ee3e new helper: ihold()
Clones an existing reference to inode; caller must already hold one.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:26:11 -04:00
Linus Torvalds 79f14b7c56 Merge branch 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: (30 commits)
  BKL: remove BKL from freevxfs
  BKL: remove BKL from qnx4
  autofs4: Only declare function when CONFIG_COMPAT is defined
  autofs: Only declare function when CONFIG_COMPAT is defined
  ncpfs: Lock socket in ncpfs while setting its callbacks
  fs/locks.c: prepare for BKL removal
  BKL: Remove BKL from ncpfs
  BKL: Remove BKL from OCFS2
  BKL: Remove BKL from squashfs
  BKL: Remove BKL from jffs2
  BKL: Remove BKL from ecryptfs
  BKL: Remove BKL from afs
  BKL: Remove BKL from USB gadgetfs
  BKL: Remove BKL from autofs4
  BKL: Remove BKL from isofs
  BKL: Remove BKL from fat
  BKL: Remove BKL from ext2 filesystem
  BKL: Remove BKL from do_new_mount()
  BKL: Remove BKL from cgroup
  BKL: Remove BKL from NTFS
  ...
2010-10-22 10:52:01 -07:00
Arnd Bergmann 6de5bd128d BKL: introduce CONFIG_BKL.
With all the patches we have queued in the BKL removal tree, only a
few dozen modules are left that actually rely on the BKL, and even
there are lots of low-hanging fruit. We need to decide what to do
about them, this patch illustrates one of the options:

Every user of the BKL is marked as 'depends on BKL' in Kconfig,
and the CONFIG_BKL becomes a user-visible option. If it gets
disabled, no BKL using module can be built any more and the BKL
code itself is compiled out.

The one exception is file locking, which is practically always
enabled and does a 'select BKL' instead. This effectively forces
CONFIG_BKL to be enabled until we have solved the fs/lockd
mess and can apply the patch that removes the BKL from fs/locks.c.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-21 15:44:13 +02:00
Jan Blunck db71922217 BKL: Explicitly add BKL around get_sb/fill_super
This patch is a preparation necessary to remove the BKL from do_new_mount().
It explicitly adds calls to lock_kernel()/unlock_kernel() around
get_sb/fill_super operations for filesystems that still uses the BKL.

I've read through all the code formerly covered by the BKL inside
do_kern_mount() and have satisfied myself that it doesn't need the BKL
any more.

do_kern_mount() is already called without the BKL when mounting the rootfs
and in nfsctl. do_kern_mount() calls vfs_kern_mount(), which is called
from various places without BKL: simple_pin_fs(), nfs_do_clone_mount()
through nfs_follow_mountpoint(), afs_mntpt_do_automount() through
afs_mntpt_follow_link(). Both later functions are actually the filesystems
follow_link inode operation. vfs_kern_mount() is calling the specified
get_sb function and lets the filesystem do its job by calling the given
fill_super function.

Therefore I think it is safe to push down the BKL from the VFS to the
low-level filesystems get_sb/fill_super operation.

[arnd: do not add the BKL to those file systems that already
       don't use it elsewhere]

Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-04 21:10:10 +02:00
Christoph Hellwig 9cb569d601 remove SWRITE* I/O types
These flags aren't real I/O types, but tell ll_rw_block to always
lock the buffer instead of giving up on a failed trylock.

Instead add a new write_dirty_buffer helper that implements this semantic
and use it from the existing SWRITE* callers.  Note that the ll_rw_block
code had a bug where it didn't promote WRITE_SYNC_PLUG properly, which
this patch fixes.

In the ufs code clean up the helper that used to call ll_rw_block
to mirror sync_dirty_buffer, which is the function it implements for
compound buffers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-18 01:09:01 -04:00
Al Viro 58e8268c7b switch ufs to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:48:02 -04:00
Christoph Hellwig 2c27c65ed0 check ATTR_SIZE contraints in inode_change_ok
Make sure we check the truncate constraints early on in ->setattr by adding
those checks to inode_change_ok.  Also clean up and document inode_change_ok
to make this obvious.

As a fallout we don't have to call inode_newsize_ok from simple_setsize and
simplify it down to a truncate_setsize which doesn't return an error.  This
simplifies a lot of setattr implementations and means we use truncate_setsize
almost everywhere.  Get rid of fat_setsize now that it's trivial and mark
ext2_setsize static to make the calling convention obvious.

Keep the inode_newsize_ok in vmtruncate for now as all callers need an
audit for its removal anyway.

Note: setattr code in ecryptfs doesn't call inode_change_ok at all and
needs a deeper audit, but that is left for later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:39 -04:00
Christoph Hellwig 1025774ce4 remove inode_setattr
Replace inode_setattr with opencoded variants of it in all callers.  This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the proper truncate sequence.

In a few cases it was obvious that we would never end up calling vmtruncate
so it was left out in the opencoded variant:

 spufs: explicitly checks for ATTR_SIZE earlier
 btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier
 ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above

In addition to that ncpfs called inode_setattr with handcrafted iattrs,
which allowed to trim down the opencoded variant.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:37 -04:00
Christoph Hellwig 155130a4f7 get rid of block_write_begin_newtrunc
Move the call to vmtruncate to get rid of accessive blocks to the callers
in preparation of the new truncate sequence and rename the non-truncating
version to block_write_begin.

While we're at it also remove several unused arguments to block_write_begin.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:33 -04:00
Christoph Hellwig 6e1db88d53 introduce __block_write_begin
Split up the block_write_begin implementation - __block_write_begin is a new
trivial wrapper for block_prepare_write that always takes an already
allocated page and can be either called from block_write_begin or filesystem
code that already has a page allocated.  Remove the handling of already
allocated pages from block_write_begin after switching all callers that
do it to __block_write_begin.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:32 -04:00
Christoph Hellwig f4e420dc42 clean up write_begin usage for directories in pagecache
For filesystem that implement directories in pagecache we call
block_write_begin with an already allocated page for this code, while the
normal regular file write path uses the default block_write_begin behaviour.

Get rid of the __foofs_write_begin helper and opencode the normal write_begin
call in foofs_write_begin, while adding a new foofs_prepare_chunk helper for
the directory code.  The added benefit is that foofs_prepare_chunk has
a much saner calling convention.

Note that the interruptible flag passed into block_write_begin is always
ignored if we already pass in a page (see next patch for details), and
we never were doing truncations of exessive blocks for this case either so we
can switch directly to block_write_begin_newtrunc.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:31 -04:00
Linus Torvalds d28619f156 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  quota: Convert quota statistics to generic percpu_counter
  ext3 uses rb_node = NULL; to zero rb_root.
  quota: Fixup dquot_transfer
  reiserfs: Fix resuming of quotas on remount read-write
  pohmelfs: Remove dead quota code
  ufs: Remove dead quota code
  udf: Remove dead quota code
  quota: rename default quotactl methods to dquot_
  quota: explicitly set ->dq_op and ->s_qcop
  quota: drop remount argument to ->quota_on and ->quota_off
  quota: move unmount handling into the filesystem
  quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers
  quota: move remount handling into the filesystem
  ocfs2: Fix use after free on remount read-only

Fix up conflicts in fs/ext4/super.c and fs/ufs/file.c
2010-05-30 09:11:11 -07:00
npiggin@suse.de 15c6fd9786 kill spurious reference to vmtruncate
Lots of filesystems calls vmtruncate despite not implementing the old
->truncate method.  Switch them to use simple_setsize and add some
comments about the truncate code where it seems fitting.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27 22:15:42 -04:00
Christoph Hellwig 1b061d9247 rename the generic fsync implementations
We don't name our generic fsync implementations very well currently.
The no-op implementation for in-memory filesystems currently is called
simple_sync_file which doesn't make too much sense to start with,
the the generic one for simple filesystems is called simple_fsync
which can lead to some confusion.

This patch renames the generic file fsync method to generic_file_fsync
to match the other generic_file_* routines it is supposed to be used
with, and the no-op implementation to noop_fsync to make it obvious
what to expect.  In addition add some documentation for both methods.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27 22:06:06 -04:00
Thomas Stewart d27d7a9a78 ufs: permit mounting of BorderWare filesystems
I recently had to recover some files from an old broken machine that was
running BorderWare Document Gateway.  It's basically a drop in web server
for sharing files.  From the look of the init process and using strings on
of a few files it seems to be based on FreeBSD 3.3.

The process turned out to be more difficult than I imagined, but to cut a
long story short BorderWare in their wisdom use a nonstandard magic number
in their UFS (ufstype=44bsd) file systems.  Thus Linux refuses to mount
the file systems in order to recover the data.  After a bit of hunting I
was able to make a quick fix to fs/ufs/super.c in order to detect the new
magic number.

I assume that this number is the same for all installations.  It's quite
easy to find out from ufs_fs.h.  The superblock sits 8k into the block
device and the magic number its 1372 bytes into the superblock struct.

# dd if=/dev/sda5 skip=$(( 8192 + 1372 )) bs=1 count=4 2> /dev/null | hd
00000000  97 26 24 0f                                       |.&$.|
#

Signed-off-by: Thomas Stewart <thomas@stewarts.org.uk>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:43 -07:00
Jan Kara 8f45c33dec ufs: Remove dead quota code
UFS quota is non-functional at least since 2.6.12 because dq_op was set
to NULL. Since the filesystem exists mainly to allow cooperation with Solaris
and quota format isn't standard, just remove the dead code.

CC: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:10:19 +02:00
Christoph Hellwig 287a80958c quota: rename default quotactl methods to dquot_
Follow the dquot_* style used elsewhere in dquot.c.

[Jan Kara: Fixed up missing conversion of ext2]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:10:17 +02:00
Christoph Hellwig 123e9caf1e quota: explicitly set ->dq_op and ->s_qcop
Only set the quota operation vectors if the filesystem actually supports
quota instead of doing it for all filesystems in alloc_super().

[Jan Kara: Export dquot_operations and vfs_quotactl_ops]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:10:17 +02:00
Christoph Hellwig e0ccfd959c quota: move unmount handling into the filesystem
Currently the VFS calls into the quotactl interface for unmounting
filesystems.  This means filesystems with their own quota handling
can't easily distinguish between user-space originating quotaoff
and an unount.  Instead move the responsibily of the unmount handling
into the filesystem to be consistent with all other dquot handling.

Note that we do call dquot_disable a lot later now, e.g. after
a sync_filesystem.  But this is fine as the quota code does all its
writes via blockdev's mapping and that is synced even later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:09:12 +02:00
Christoph Hellwig 0f0dd62fdd quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers
Instead of having wrappers in the VFS namespace export the dquot_suspend
and dquot_resume helpers directly.  Also rename vfs_quota_disable to
dquot_disable while we're at it.

[Jan Kara: Moved dquot_suspend to quotaops.h and made it inline]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:06:40 +02:00
Christoph Hellwig c79d967de3 quota: move remount handling into the filesystem
Currently do_remount_sb calls into the dquot code to tell it about going
from rw to ro and ro to rw.  Move this code into the filesystem to
not depend on the dquot code in the VFS - note ocfs2 already ignores
these calls and handles remount by itself.  This gets rid of overloading
the quotactl calls and allows to unify the VFS and XFS codepaths in
that area later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:06:39 +02:00
Dmitry Monakhov be8ded5974 ufs: replace inode uid,gid,mode initialization with helper function
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:27 -04:00
Dmitry Monakhov 12755627bd quota: unify quota init condition in setattr
Quota must being initialized if size or uid/git changes requested.
But initialization performed in two different places:
in case of i_size file system is responsible for dquot init
, but in case of uid/gid init will be called internally in
dquot_transfer().
This ambiguity makes code harder to understand.
Let's move this logic to one common helper function.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:45 +02:00
Dmitry Monakhov 311b9549ed ufs: add ufs speciffic ->setattr call
generic setattr not longer responsible for quota transfer.
use ufs_setattr for all ufs's inodes.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:40 +02:00
Evgeniy Dushistov ad25ad979a ufs: make solaris fsck happy
Alex Viskovatoff let me know that after copying data to solaris's ufs from
linux, solaris's fsck sees some errors in cylinder summary information.
This is because of solaris expects find some data on another places, then
curernt implementation save it.  This patch fixes this issue.  It is
tested by me, and also Alex reported that it works for him.

Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Reported-by: Alex Viskovatoff <viskovatoff@imap.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:35 -08:00
Alex Viskovatoff b3a0fd4d87 fs/ufs: recognize Solaris-specific file system state
Recent releases of Solaris set the fs_clean state of an unmounted UFS file
system as FSLOG ("logging fs").  However, the Linux kernel currently does
not recognize the value which represents this state.  Thus, attempting to
mount such a file system rw produces the message

kernel: ufs_read_super: can't grok fs_clean 0xfffffffd

and the file system is mounted read-only.  This patch makes the kernel
recognize that value.

Signed-off-by: Alex Viskovatoff <viskovatoff@imap.cc>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:35 -08:00
Linus Torvalds e213e26ab3 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
  quota: stop using QUOTA_OK / NO_QUOTA
  dquot: cleanup dquot initialize routine
  dquot: move dquot initialization responsibility into the filesystem
  dquot: cleanup dquot drop routine
  dquot: move dquot drop responsibility into the filesystem
  dquot: cleanup dquot transfer routine
  dquot: move dquot transfer responsibility into the filesystem
  dquot: cleanup inode allocation / freeing routines
  dquot: cleanup space allocation / freeing routines
  ext3: add writepage sanity checks
  ext3: Truncate allocated blocks if direct IO write fails to update i_size
  quota: Properly invalidate caches even for filesystems with blocksize < pagesize
  quota: generalize quota transfer interface
  quota: sb_quota state flags cleanup
  jbd: Delay discarding buffers in journal_unmap_buffer
  ext3: quota_write cross block boundary behaviour
  quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
  quota: split out compat_sys_quotactl support from quota.c
  quota: split out netlink notification support from quota.c
  quota: remove invalid optimization from quota_sync_all
  ...

Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
2010-03-05 13:20:53 -08:00
Christoph Hellwig a9185b41a4 pass writeback_control to ->write_inode
This gives the filesystem more information about the writeback that
is happening.  Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-05 13:25:52 -05:00
Christoph Hellwig 871a293155 dquot: cleanup dquot initialize routine
Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:30 +01:00
Christoph Hellwig 907f4554e2 dquot: move dquot initialization responsibility into the filesystem
Currently various places in the VFS call vfs_dq_init directly.  This means
we tie the quota code into the VFS.  Get rid of that and make the
filesystem responsible for the initialization.   For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.

For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.

For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.

Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:30 +01:00
Christoph Hellwig 9f75475802 dquot: cleanup dquot drop routine
Get rid of the drop dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_drop helper to __dquot_drop
and vfs_dq_drop to dquot_drop to have a consistent namespace.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:30 +01:00
Christoph Hellwig 257ba15ced dquot: move dquot drop responsibility into the filesystem
Currently clear_inode calls vfs_dq_drop directly.  This means
we tie the quota code into the VFS.  Get rid of that and make the
filesystem responsible for the drop inside the ->clear_inode
superblock operation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:29 +01:00
Christoph Hellwig b43fa8284d dquot: cleanup dquot transfer routine
Get rid of the transfer dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_transfer helper to __dquot_transfer
and vfs_dq_transfer to dquot_transfer to have a consistent namespace,
and make the new dquot_transfer return a normal negative errno value
which all callers expect.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:29 +01:00
Christoph Hellwig 759bfee658 dquot: move dquot transfer responsibility into the filesystem
Currently notify_change calls vfs_dq_transfer directly.  This means
we tie the quota code into the VFS.  Get rid of that and make the
filesystem responsible for the transfer.  Most filesystems already
do this, only ufs and udf need the code added, and for jfs it needs to
be enabled unconditionally instead of only when ACLs are enabled.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:28 +01:00
Christoph Hellwig 63936ddaa1 dquot: cleanup inode allocation / freeing routines
Get rid of the alloc_inode and free_inode dquot operations - they are
always called from the filesystem and if a filesystem really needs
their own (which none currently does) it can just call into it's
own routine directly.

Also get rid of the vfs_dq_alloc/vfs_dq_free wrappers and always
call the lowlevel dquot_alloc_inode / dqout_free_inode routines
directly, which now lose the number argument which is always 1.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:28 +01:00
Christoph Hellwig 5dd4056db8 dquot: cleanup space allocation / freeing routines
Get rid of the alloc_space, free_space, reserve_space, claim_space and
release_rsv dquot operations - they are always called from the filesystem
and if a filesystem really needs their own (which none currently does)
it can just call into it's own routine directly.

Move shared logic into the common __dquot_alloc_space,
dquot_claim_space_nodirty and __dquot_free_space low-level methods,
and rationalize the wrappers around it to move as much as possible
code into the common block for CONFIG_QUOTA vs not.  Also rename
all these helpers to be named dquot_* instead of vfs_dq_*.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:28 +01:00
Al Viro 89031bc797 sanitize const/signedness of ufs a bit
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-03 14:07:57 -05:00
Alexey Dobriyan f3e2a520f5 ufs: NFS support
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 07:20:06 -08:00
Alexey Dobriyan 080497079c ufs: pass qstr instead of dentry where necessary for NFS
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 07:20:06 -08:00
Roel Kluin 37044c86ba ufs: sector_t cannot be negative
unsigned i_block,fragment cannot be negative.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:46 -07:00
Christoph Hellwig 8c8006564a ufs: add ->sync_fs
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:16 -04:00
Al Viro a932801543 switch ufs to simple_fsync()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:13 -04:00
Alessio Igor Bogani 337eb00a2c Push BKL down into ->remount_fs()
[xfs, btrfs, capifs, shmem don't need BKL, exempt]

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:11 -04:00
Christoph Hellwig ebc1ac1645 ->write_super lock_super pushdown
Push down lock_super into ->write_super instances and remove it from the
caller.

Following filesystem don't need ->s_lock in ->write_super and are skipped:

 * bfs, nilfs2 - no other uses of s_lock and have internal locks in
	->write_super
 * ext2 - uses BKL in ext2_write_super and has internal calls without s_lock
 * reiserfs - no other uses of s_lock as has reiserfs_write_lock (BKL) in
 	->write_super
 * xfs - no other uses of s_lock and uses internal lock (buffer lock on
	superblock buffer) to serialize ->write_super.  Also xfs_fs_write_super
	is superflous and will go away in the next merge window

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:09 -04:00
Al Viro bbd6851a32 Push lock_super() into the ->remount_fs() of filesystems that care about it
Note that since we can't run into contention between remount_fs and write_super
(due to exclusion on s_umount), we have to care only about filesystems that
touch lock_super() on their own.  Out of those ext3, ext4, hpfs, sysv and ufs
do need it; fat doesn't since its ->remount_fs() only accesses assign-once
data (basically, it's "we have no atime on directories and only have atime on
files for vfat; force nodiratime and possibly noatime into *flags").

[folded a build fix from hch]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:08 -04:00