Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
The function force_sigsegv is always called on the current task
so passing in current is redundant and not passing in current
makes this fact obvious.
This also makes it clear force_sigsegv always calls force_sig
on the current task.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
->recursion_depth is changed only by current, therefore decrementing can
be done without taking any locks.
Link: http://lkml.kernel.org/r/20190417213150.GA26474@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Large enterprise clients often run applications out of networked file
systems where the IT mandated layout of project volumes can end up
leading to paths that are longer than 128 characters. Bumping this up
to the next order of two solves this problem in all but the most
egregious case while still fitting into a 512b slab.
[oleg@redhat.com: update comment, per Kees]
Link: http://lkml.kernel.org/r/20181112160956.GA28472@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Ben Woodard <woodard@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- refcount conversions
- Solve the rq->leaf_cfs_rq_list can of worms for real.
- improve power-aware scheduling
- add sysctl knob for Energy Aware Scheduling
- documentation updates
- misc other changes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
kthread: Do not use TIMER_IRQSAFE
kthread: Convert worker lock to raw spinlock
sched/fair: Use non-atomic cpumask_{set,clear}_cpu()
sched/fair: Remove unused 'sd' parameter from select_idle_smt()
sched/wait: Use freezable_schedule() when possible
sched/fair: Prune, fix and simplify the nohz_balancer_kick() comment block
sched/fair: Explain LLC nohz kick condition
sched/fair: Simplify nohz_balancer_kick()
sched/topology: Fix percpu data types in struct sd_data & struct s_data
sched/fair: Simplify post_init_entity_util_avg() by calling it with a task_struct pointer argument
sched/fair: Fix O(nr_cgroups) in the load balancing path
sched/fair: Optimize update_blocked_averages()
sched/fair: Fix insertion in rq->leaf_cfs_rq_list
sched/fair: Add tmp_alone_branch assertion
sched/core: Use READ_ONCE()/WRITE_ONCE() in move_queued_task()/task_rq_lock()
sched/debug: Initialize sd_sysctl_cpus if !CONFIG_CPUMASK_OFFSTACK
sched/pelt: Skip updating util_est when utilization is higher than CPU's capacity
sched/fair: Update scale invariance of PELT
sched/fair: Move the rq_of() helper function
sched/core: Convert task_struct.stack_refcount to refcount_t
...
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable sighand_struct.count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
** Important note for maintainers:
Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.
For the sighand_struct.count it might make a difference
in following places:
- __cleanup_sighand: decrement in refcount_dec_and_test() only
provides RELEASE ordering and control dependency on success
vs. fully ordered atomic counterpart
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: viro@zeniv.linux.org.uk
Link: https://lkml.kernel.org/r/1547814450-18902-2-git-send-email-elena.reshetova@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull trivial vfs updates from Al Viro:
"A few cleanups + Neil's namespace_unlock() optimization"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
exec: make prepare_bprm_creds static
genheaders: %-<width>s had been there since v6; %-*s - since v7
VFS: use synchronize_rcu_expedited() in namespace_unlock()
iov_iter: reduce code duplication
This is already done for us internally by the signal machinery.
[akpm@linux-foundation.org: fix fs/buffer.c]
Link: http://lkml.kernel.org/r/20181116002713.8474-7-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
get_arg_page() checks bprm->rlim_stack.rlim_cur and re-calculates the
"extra" size for argv/envp pointers every time, this is a bit ugly and
even not strictly correct: acct_arg_size() must not account this size.
Remove all the rlimit code in get_arg_page(). Instead, add bprm->argmin
calculated once at the start of __do_execve_file() and change
copy_strings to check bprm->p >= bprm->argmin.
The patch adds the new helper, prepare_arg_pages() which initializes
bprm->argc/envc and bprm->argmin.
[oleg@redhat.com: fix !CONFIG_MMU version of get_arg_page()]
Link: http://lkml.kernel.org/r/20181126122307.GA1660@redhat.com
[akpm@linux-foundation.org: use max_t]
Link: http://lkml.kernel.org/r/20181112160910.GA28440@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
prepare_bprm_creds is not used outside exec.c, so there's no reason for it
to have external linkage.
Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Revert commit c22397888f "exec: make de_thread() freezable" as
requested by Ingo Molnar:
"So there's a new regression in v4.20-rc4, my desktop produces this
lockdep splat:
[ 1772.588771] WARNING: pkexec/4633 still has locks held!
[ 1772.588773] 4.20.0-rc4-custom-00213-g93a49841322b #1 Not tainted
[ 1772.588775] ------------------------------------
[ 1772.588776] 1 lock held by pkexec/4633:
[ 1772.588778] #0: 00000000ed85fbf8 (&sig->cred_guard_mutex){+.+.}, at: prepare_bprm_creds+0x2a/0x70
[ 1772.588786] stack backtrace:
[ 1772.588789] CPU: 7 PID: 4633 Comm: pkexec Not tainted 4.20.0-rc4-custom-00213-g93a49841322b #1
[ 1772.588792] Call Trace:
[ 1772.588800] dump_stack+0x85/0xcb
[ 1772.588803] flush_old_exec+0x116/0x890
[ 1772.588807] ? load_elf_phdrs+0x72/0xb0
[ 1772.588809] load_elf_binary+0x291/0x1620
[ 1772.588815] ? sched_clock+0x5/0x10
[ 1772.588817] ? search_binary_handler+0x6d/0x240
[ 1772.588820] search_binary_handler+0x80/0x240
[ 1772.588823] load_script+0x201/0x220
[ 1772.588825] search_binary_handler+0x80/0x240
[ 1772.588828] __do_execve_file.isra.32+0x7d2/0xa60
[ 1772.588832] ? strncpy_from_user+0x40/0x180
[ 1772.588835] __x64_sys_execve+0x34/0x40
[ 1772.588838] do_syscall_64+0x60/0x1c0
The warning gets triggered by an ancient lockdep check in the freezer:
(gdb) list *0xffffffff812ece06
0xffffffff812ece06 is in flush_old_exec (./include/linux/freezer.h:57).
52 * DO NOT ADD ANY NEW CALLERS OF THIS FUNCTION
53 * If try_to_freeze causes a lockdep warning it means the caller may deadlock
54 */
55 static inline bool try_to_freeze_unsafe(void)
56 {
57 might_sleep();
58 if (likely(!freezing(current)))
59 return false;
60 return __refrigerator(false);
61 }
I reviewed the ->cred_guard_mutex code, and the mutex is held across all
of exec() - and we always did this.
But there's this recent -rc4 commit:
> Chanho Min (1):
> exec: make de_thread() freezable
c22397888f: exec: make de_thread() freezable
I believe this commit is bogus, you cannot call try_to_freeze() from
de_thread(), because it's holding the ->cred_guard_mutex."
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Suspend fails due to the exec family of functions blocking the freezer.
The casue is that de_thread() sleeps in TASK_UNINTERRUPTIBLE waiting for
all sub-threads to die, and we have the deadlock if one of them is frozen.
This also can occur with the schedule() waiting for the group thread leader
to exit if it is frozen.
In our machine, it causes freeze timeout as bellows.
Freezing of tasks failed after 20.010 seconds (1 tasks refusing to freeze, wq_busy=0):
setcpushares-ls D ffffffc00008ed70 0 5817 1483 0x0040000d
Call trace:
[<ffffffc00008ed70>] __switch_to+0x88/0xa0
[<ffffffc000d1c30c>] __schedule+0x1bc/0x720
[<ffffffc000d1ca90>] schedule+0x40/0xa8
[<ffffffc0001cd784>] flush_old_exec+0xdc/0x640
[<ffffffc000220360>] load_elf_binary+0x2a8/0x1090
[<ffffffc0001ccff4>] search_binary_handler+0x9c/0x240
[<ffffffc00021c584>] load_script+0x20c/0x228
[<ffffffc0001ccff4>] search_binary_handler+0x9c/0x240
[<ffffffc0001ce8e0>] do_execveat_common.isra.14+0x4f8/0x6e8
[<ffffffc0001cedd0>] compat_SyS_execve+0x38/0x48
[<ffffffc00008de30>] el0_svc_naked+0x24/0x28
To fix this, make de_thread() freezable. It looks safe and works fine.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Chanho Min <chanho.min@lge.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On 32-bit systems, the buffer allocated by kernel_read_file() is too
small if the file size is > SIZE_MAX, due to truncation to size_t.
Fortunately, since the 'count' argument to kernel_read() is also
truncated to size_t, only the allocated space is filled; then, -EIO is
returned since 'pos != i_size' after the read loop.
But this is not obvious and seems incidental. We should be more
explicit about this case. So, fail early if i_size > SIZE_MAX.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Pull core signal handling updates from Eric Biederman:
"It was observed that a periodic timer in combination with a
sufficiently expensive fork could prevent fork from every completing.
This contains the changes to remove the need for that restart.
This set of changes is split into several parts:
- The first part makes PIDTYPE_TGID a proper pid type instead
something only for very special cases. The part starts using
PIDTYPE_TGID enough so that in __send_signal where signals are
actually delivered we know if the signal is being sent to a a group
of processes or just a single process.
- With that prep work out of the way the logic in fork is modified so
that fork logically makes signals received while it is running
appear to be received after the fork completes"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits)
signal: Don't send signals to tasks that don't exist
signal: Don't restart fork when signals come in.
fork: Have new threads join on-going signal group stops
fork: Skip setting TIF_SIGPENDING in ptrace_init_task
signal: Add calculate_sigpending()
fork: Unconditionally exit if a fatal signal is pending
fork: Move and describe why the code examines PIDNS_ADDING
signal: Push pid type down into complete_signal.
signal: Push pid type down into __send_signal
signal: Push pid type down into send_signal
signal: Pass pid type into do_send_sig_info
signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task
signal: Pass pid type into group_send_sig_info
signal: Pass pid and pid type into send_sigqueue
posix-timers: Noralize good_sigevent
signal: Use PIDTYPE_TGID to clearly store where file signals will be sent
pid: Implement PIDTYPE_TGID
pids: Move the pgrp and session pid pointers from task_struct to signal_struct
kvm: Don't open code task_pid in kvm_vcpu_ioctl
pids: Compute task_tgid using signal->leader_pid
...
Like vm_area_dup(), it initializes the anon_vma_chain head, and the
basic mm pointer.
The rest of the fields end up being different for different users,
although the plan is to also initialize the 'vm_ops' field to a dummy
entry.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The vm_area_struct is one of the most fundamental memory management
objects, but the management of it is entirely open-coded evertwhere,
ranging from allocation and freeing (using kmem_cache_[z]alloc and
kmem_cache_free) to initializing all the fields.
We want to unify this in order to end up having some unified
initialization of the vmas, and the first step to this is to at least
have basic allocation functions.
Right now those functions are literally just wrappers around the
kmem_cache_*() calls. This is a purely mechanical conversion:
# new vma:
kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL) -> vm_area_alloc()
# copy old vma
kmem_cache_alloc(vm_area_cachep, GFP_KERNEL) -> vm_area_dup(old)
# free vma
kmem_cache_free(vm_area_cachep, vma) -> vm_area_free(vma)
to the point where the old vma passed in to the vm_area_dup() function
isn't even used yet (because I've left all the old manual initialization
alone).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Everywhere except in the pid array we distinguish between a tasks pid and
a tasks tgid (thread group id). Even in the enumeration we want that
distinction sometimes so we have added __PIDTYPE_TGID. With leader_pid
we almost have an implementation of PIDTYPE_TGID in struct signal_struct.
Add PIDTYPE_TGID as a first class member of the pid_type enumeration and
into the pids array. Then remove the __PIDTYPE_TGID special case and the
leader_pid in signal_struct.
The net size increase is just an extra pointer added to struct pid and
an extra pair of pointers of an hlist_node added to task_struct.
The effect on code maintenance is the removal of a number of special
cases today and the potential to remove many more special cases as
PIDTYPE_TGID gets used to it's fullest. The long term potential
is allowing zombie thread group leaders to exit, which will remove
a lot more special cases in the code.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pull restartable sequence support from Thomas Gleixner:
"The restartable sequences syscall (finally):
After a lot of back and forth discussion and massive delays caused by
the speculative distraction of maintainers, the core set of
restartable sequences has finally reached a consensus.
It comes with the basic non disputed core implementation along with
support for arm, powerpc and x86 and a full set of selftests
It was exposed to linux-next earlier this week, so it does not fully
comply with the merge window requirements, but there is really no
point to drag it out for yet another cycle"
* 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq/selftests: Provide Makefile, scripts, gitignore
rseq/selftests: Provide parametrized tests
rseq/selftests: Provide basic percpu ops test
rseq/selftests: Provide basic test
rseq/selftests: Provide rseq library
selftests/lib.mk: Introduce OVERRIDE_TARGETS
powerpc: Wire up restartable sequences system call
powerpc: Add syscall detection for restartable sequences
powerpc: Add support for restartable sequences
x86: Wire up restartable sequence system call
x86: Add support for restartable sequences
arm: Wire up restartable sequences system call
arm: Add syscall detection for restartable sequences
arm: Add restartable sequences support
rseq: Introduce restartable sequences system call
uapi/headers: Provide types_32_64.h
Expose a new system call allowing each thread to register one userspace
memory area to be used as an ABI between kernel and user-space for two
purposes: user-space restartable sequences and quick access to read the
current CPU number value from user-space.
* Restartable sequences (per-cpu atomics)
Restartables sequences allow user-space to perform update operations on
per-cpu data without requiring heavy-weight atomic operations.
The restartable critical sections (percpu atomics) work has been started
by Paul Turner and Andrew Hunter. It lets the kernel handle restart of
critical sections. [1] [2] The re-implementation proposed here brings a
few simplifications to the ABI which facilitates porting to other
architectures and speeds up the user-space fast path.
Here are benchmarks of various rseq use-cases.
Test hardware:
arm32: ARMv7 Processor rev 4 (v7l) "Cubietruck", 2-core
x86-64: Intel E5-2630 v3@2.40GHz, 16-core, hyperthreading
The following benchmarks were all performed on a single thread.
* Per-CPU statistic counter increment
getcpu+atomic (ns/op) rseq (ns/op) speedup
arm32: 344.0 31.4 11.0
x86-64: 15.3 2.0 7.7
* LTTng-UST: write event 32-bit header, 32-bit payload into tracer
per-cpu buffer
getcpu+atomic (ns/op) rseq (ns/op) speedup
arm32: 2502.0 2250.0 1.1
x86-64: 117.4 98.0 1.2
* liburcu percpu: lock-unlock pair, dereference, read/compare word
getcpu+atomic (ns/op) rseq (ns/op) speedup
arm32: 751.0 128.5 5.8
x86-64: 53.4 28.6 1.9
* jemalloc memory allocator adapted to use rseq
Using rseq with per-cpu memory pools in jemalloc at Facebook (based on
rseq 2016 implementation):
The production workload response-time has 1-2% gain avg. latency, and
the P99 overall latency drops by 2-3%.
* Reading the current CPU number
Speeding up reading the current CPU number on which the caller thread is
running is done by keeping the current CPU number up do date within the
cpu_id field of the memory area registered by the thread. This is done
by making scheduler preemption set the TIF_NOTIFY_RESUME flag on the
current thread. Upon return to user-space, a notify-resume handler
updates the current CPU value within the registered user-space memory
area. User-space can then read the current CPU number directly from
memory.
Keeping the current cpu id in a memory area shared between kernel and
user-space is an improvement over current mechanisms available to read
the current CPU number, which has the following benefits over
alternative approaches:
- 35x speedup on ARM vs system call through glibc
- 20x speedup on x86 compared to calling glibc, which calls vdso
executing a "lsl" instruction,
- 14x speedup on x86 compared to inlined "lsl" instruction,
- Unlike vdso approaches, this cpu_id value can be read from an inline
assembly, which makes it a useful building block for restartable
sequences.
- The approach of reading the cpu id through memory mapping shared
between kernel and user-space is portable (e.g. ARM), which is not the
case for the lsl-based x86 vdso.
On x86, yet another possible approach would be to use the gs segment
selector to point to user-space per-cpu data. This approach performs
similarly to the cpu id cache, but it has two disadvantages: it is
not portable, and it is incompatible with existing applications already
using the gs segment selector for other purposes.
Benchmarking various approaches for reading the current CPU number:
ARMv7 Processor rev 4 (v7l)
Machine model: Cubietruck
- Baseline (empty loop): 8.4 ns
- Read CPU from rseq cpu_id: 16.7 ns
- Read CPU from rseq cpu_id (lazy register): 19.8 ns
- glibc 2.19-0ubuntu6.6 getcpu: 301.8 ns
- getcpu system call: 234.9 ns
x86-64 Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz:
- Baseline (empty loop): 0.8 ns
- Read CPU from rseq cpu_id: 0.8 ns
- Read CPU from rseq cpu_id (lazy register): 0.8 ns
- Read using gs segment selector: 0.8 ns
- "lsl" inline assembly: 13.0 ns
- glibc 2.19-0ubuntu6 getcpu: 16.6 ns
- getcpu system call: 53.9 ns
- Speed (benchmark taken on v8 of patchset)
Running 10 runs of hackbench -l 100000 seems to indicate, contrary to
expectations, that enabling CONFIG_RSEQ slightly accelerates the
scheduler:
Configuration: 2 sockets * 8-core Intel(R) Xeon(R) CPU E5-2630 v3 @
2.40GHz (directly on hardware, hyperthreading disabled in BIOS, energy
saving disabled in BIOS, turboboost disabled in BIOS, cpuidle.off=1
kernel parameter), with a Linux v4.6 defconfig+localyesconfig,
restartable sequences series applied.
* CONFIG_RSEQ=n
avg.: 41.37 s
std.dev.: 0.36 s
* CONFIG_RSEQ=y
avg.: 40.46 s
std.dev.: 0.33 s
- Size
On x86-64, between CONFIG_RSEQ=n/y, the text size increase of vmlinux is
567 bytes, and the data size increase of vmlinux is 5696 bytes.
[1] https://lwn.net/Articles/650333/
[2] http://www.linuxplumbersconf.org/2013/ocw/system/presentations/1695/original/LPC%20-%20PerCpu%20Atomics.pdf
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Chris Lameter <cl@linux.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Hunter <ahh@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-api@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20151027235635.16059.11630.stgit@pjt-glaptop.roam.corp.google.com
Link: http://lkml.kernel.org/r/20150624222609.6116.86035.stgit@kitami.mtv.corp.google.com
Link: https://lkml.kernel.org/r/20180602124408.8430-3-mathieu.desnoyers@efficios.com
Introduce helper:
int fork_usermode_blob(void *data, size_t len, struct umh_info *info);
struct umh_info {
struct file *pipe_to_umh;
struct file *pipe_from_umh;
pid_t pid;
};
that GPLed kernel modules (signed or unsigned) can use it to execute part
of its own data as swappable user mode process.
The kernel will do:
- allocate a unique file in tmpfs
- populate that file with [data, data + len] bytes
- user-mode-helper code will do_execve that file and, before the process
starts, the kernel will create two unix pipes for bidirectional
communication between kernel module and umh
- close tmpfs file, effectively deleting it
- the fork_usermode_blob will return zero on success and populate
'struct umh_info' with two unix pipes and the pid of the user process
As the first step in the development of the bpfilter project
the fork_usermode_blob() helper is introduced to allow user mode code
to be invoked from a kernel module. The idea is that user mode code plus
normal kernel module code are built as part of the kernel build
and installed as traditional kernel module into distro specified location,
such that from a distribution point of view, there is
no difference between regular kernel modules and kernel modules + umh code.
Such modules can be signed, modprobed, rmmod, etc. The use of this new helper
by a kernel module doesn't make it any special from kernel and user space
tooling point of view.
Such approach enables kernel to delegate functionality traditionally done
by the kernel modules into the user space processes (either root or !root) and
reduces security attack surface of the new code. The buggy umh code would crash
the user process, but not the kernel. Another advantage is that umh code
of the kernel module can be debugged and tested out of user space
(e.g. opening the possibility to run clang sanitizers, fuzzers or
user space test suites on the umh code).
In case of the bpfilter project such architecture allows complex control plane
to be done in the user space while bpf based data plane stays in the kernel.
Since umh can crash, can be oom-ed by the kernel, killed by the admin,
the kernel module that uses them (like bpfilter) needs to manage life
time of umh on its own via two unix pipes and the pid of umh.
The exit code of such kernel module should kill the umh it started,
so that rmmod of the kernel module will cleanup the corresponding umh.
Just like if the kernel module does kmalloc() it should kfree() it
in the exit code.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the stack rlimit is used in multiple places during exec and it can
be changed via other threads (via setrlimit()) or processes (via
prlimit()), the assumption that the value doesn't change cannot be made.
This leads to races with mm layout selection and argument size
calculations. This changes the exec path to use the rlimit stored in
bprm instead of in current. Before starting the thread, the bprm stack
rlimit is stored back to current.
Link: http://lkml.kernel.org/r/1518638796-20819-4-git-send-email-keescook@chromium.org
Fixes: 64701dee41 ("exec: Use sane stack rlimit under secureexec")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Reported-by: Andy Lutomirski <luto@kernel.org>
Reported-by: Brad Spengler <spender@grsecurity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide a final callback into fs/exec.c before start_thread() takes
over, to handle any last-minute changes, like the coming restoration of
the stack limit.
Link: http://lkml.kernel.org/r/1518638796-20819-3-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Greg KH <greg@kroah.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "exec: Pin stack limit during exec".
Attempts to solve problems with the stack limit changing during exec
continue to be frustrated[1][2]. In addition to the specific issues
around the Stack Clash family of flaws, Andy Lutomirski pointed out[3]
other places during exec where the stack limit is used and is assumed to
be unchanging. Given the many places it gets used and the fact that it
can be manipulated/raced via setrlimit() and prlimit(), I think the only
way to handle this is to move away from the "current" view of the stack
limit and instead attach it to the bprm, and plumb this down into the
functions that need to know the stack limits. This series implements
the approach.
[1] 04e35f4495 ("exec: avoid RLIMIT_STACK races with prlimit()")
[2] 779f4e1c6c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"")
[3] to security@kernel.org, "Subject: existing rlimit races?"
This patch (of 3):
Since it is possible that the stack rlimit can change externally during
exec (either via another thread calling setrlimit() or another process
calling prlimit()), provide a way to pass the rlimit down into the
per-architecture mm layout functions so that the rlimit can stay in the
bprm structure instead of sitting in the signal structure until exec is
finalized.
Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Greg KH <greg@kroah.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The LSM check should happen after the file has been confirmed to be
unchanging. Without this, we could have a race between the Time of Check
(the call to security_kernel_read_file() which could read the file and
make access policy decisions) and the Time of Use (starting with
kernel_read_file()'s reading of the file contents). In theory, file
contents could change between the two.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
This is a logical revert of commit e37fdb785a ("exec: Use secureexec
for setting dumpability")
This weakens dumpability back to checking only for uid/gid changes in
current (which is useless), but userspace depends on dumpability not
being tied to secureexec.
https://bugzilla.redhat.com/show_bug.cgi?id=1528633
Reported-by: Tom Horsley <horsley1953@gmail.com>
Fixes: e37fdb785a ("exec: Use secureexec for setting dumpability")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 04e35f4495.
SELinux runs with secureexec for all non-"noatsecure" domain transitions,
which means lots of processes end up hitting the stack hard-limit change
that was introduced in order to fix a race with prlimit(). That race fix
will need to be redesigned.
Reported-by: Laura Abbott <labbott@redhat.com>
Reported-by: Tomáš Trnka <trnka@scm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc-8 warns about using strncpy() with the source size as the limit:
fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
This is indeed slightly suspicious, as it protects us from source
arguments without NUL-termination, but does not guarantee that the
destination is terminated.
This keeps the strncpy() to ensure we have properly padded target
buffer, but ensures that we use the correct length, by passing the
actual length of the destination buffer as well as adding a build-time
check to ensure it is exactly TASK_COMM_LEN.
There are only 23 callsites which I all reviewed to ensure this is
currently the case. We could get away with doing only the check or
passing the right length, but it doesn't hurt to do both.
Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Aleksa Sarai <asarai@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While the defense-in-depth RLIMIT_STACK limit on setuid processes was
protected against races from other threads calling setrlimit(), I missed
protecting it against races from external processes calling prlimit().
This adds locking around the change and makes sure that rlim_max is set
too.
Link: http://lkml.kernel.org/r/20171127193457.GA11348@beast
Fixes: 64701dee41 ("exec: Use sane stack rlimit under secureexec")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Reported-by: Brad Spengler <spender@grsecurity.net>
Acked-by: Serge Hallyn <serge@hallyn.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This introduces a "register private expedited" membarrier command which
allows eventual removal of important memory barrier constraints on the
scheduler fast-paths. It changes how the "private expedited" membarrier
command (new to 4.14) is used from user-space.
This new command allows processes to register their intent to use the
private expedited command. This affects how the expedited private
command introduced in 4.14-rc is meant to be used, and should be merged
before 4.14 final.
Processes are now required to register before using
MEMBARRIER_CMD_PRIVATE_EXPEDITED, otherwise that command returns EPERM.
This fixes a problem that arose when designing requested extensions to
sys_membarrier() to allow JITs to efficiently flush old code from
instruction caches. Several potential algorithms are much less painful
if the user register intent to use this functionality early on, for
example, before the process spawns the second thread. Registering at
this time removes the need to interrupt each and every thread in that
process at the first expedited sys_membarrier() system call.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "exec: binfmt_misc: fix use-after-free, kill
iname[BINPRM_BUF_SIZE]".
It looks like this code was always wrong, then commit 948b701a60
("binfmt_misc: add persistent opened binary handler for containers")
added more problems.
This patch (of 6):
load_script() can simply use i_name instead, it points into bprm->buf[]
and nobody can change this memory until we call prepare_binprm().
The only complication is that we need to also change the signature of
bprm_change_interp() but this change looks good too.
While at it, do whitespace/style cleanups.
NOTE: the real motivation for this change is that people want to
increase BINPRM_BUF_SIZE, we need to change load_misc_binary() too but
this looks more complicated because afaics it is very buggy.
Link: http://lkml.kernel.org/r/20170918163446.GA26793@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Travis Gummels <tgummels@redhat.com>
Cc: Ben Woodard <woodard@redhat.com>
Cc: Jim Foraker <foraker1@llnl.gov>
Cc: <tdhooge@llnl.gov>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch constifies the path argument to kernel_read_file_from_path().
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull more set_fs removal from Al Viro:
"Christoph's 'use kernel_read and friends rather than open-coding
set_fs()' series"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: unexport vfs_readv and vfs_writev
fs: unexport vfs_read and vfs_write
fs: unexport __vfs_read/__vfs_write
lustre: switch to kernel_write
gadget/f_mass_storage: stop messing with the address limit
mconsole: switch to kernel_read
btrfs: switch write_buf to kernel_write
net/9p: switch p9_fd_read to kernel_write
mm/nommu: switch do_mmap_private to kernel_read
serial2002: switch serial2002_tty_write to kernel_{read/write}
fs: make the buf argument to __kernel_write a void pointer
fs: fix kernel_write prototype
fs: fix kernel_read prototype
fs: move kernel_read to fs/read_write.c
fs: move kernel_write to fs/read_write.c
autofs4: switch autofs4_write to __kernel_write
ashmem: switch to ->read_iter
GFP_TEMPORARY was introduced by commit e12ba74d8f ("Group short-lived
and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's
primary motivation was to allow users to tell that an allocation is
short lived and so the allocator can try to place such allocations close
together and prevent long term fragmentation. As much as this sounds
like a reasonable semantic it becomes much less clear when to use the
highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the
context holding that memory sleep? Can it take locks? It seems there is
no good answer for those questions.
The current implementation of GFP_TEMPORARY is basically GFP_KERNEL |
__GFP_RECLAIMABLE which in itself is tricky because basically none of
the existing caller provide a way to reclaim the allocated memory. So
this is rather misleading and hard to evaluate for any benefits.
I have checked some random users and none of them has added the flag
with a specific justification. I suspect most of them just copied from
other existing users and others just thought it might be a good idea to
use without any measuring. This suggests that GFP_TEMPORARY just
motivates for cargo cult usage without any reasoning.
I believe that our gfp flags are quite complex already and especially
those with highlevel semantic should be clearly defined to prevent from
confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and
replace all existing users to simply use GFP_KERNEL. Please note that
SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and
so they will be placed properly for memory fragmentation prevention.
I can see reasons we might want some gfp flag to reflect shorterm
allocations but I propose starting from a clear semantic definition and
only then add users with proper justification.
This was been brought up before LSF this year by Matthew [1] and it
turned out that GFP_TEMPORARY really doesn't have a clear semantic. It
seems to be a heuristic without any measured advantage for most (if not
all) its current users. The follow up discussion has revealed that
opinions on what might be temporary allocation differ a lot between
developers. So rather than trying to tweak existing users into a
semantic which they haven't expected I propose to simply remove the flag
and start from scratch if we really need a semantic for short term
allocations.
[1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org
[akpm@linux-foundation.org: fix typo]
[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: drm/i915: fix up]
Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use proper ssize_t and size_t types for the return value and count
argument, move the offset last and make it an in/out argument like
all other read/write helpers, and make the buf argument a void pointer
to get rid of lots of casts in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of an additional secureexec check for pdeath_signal, just move it
up into the initial secureexec test. Neither perf nor arch code touches
pdeath_signal, so the relocation shouldn't change anything.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
For a secureexec, before memory layout selection has happened, reset the
stack rlimit to something sane to avoid the caller having control over
the resulting layouts.
$ ulimit -s
8192
$ ulimit -s unlimited
$ /bin/sh -c 'ulimit -s'
unlimited
$ sudo /bin/sh -c 'ulimit -s'
8192
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Since it's already valid to set dumpability in the early part of
setup_new_exec(), we can consolidate the logic into a single place.
The BINPRM_FLAGS_ENFORCE_NONDUMP is set during would_dump() calls
before setup_new_exec(), so its test is safe to move as well.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Like dumpability, clearing pdeath_signal happens both in setup_new_exec()
and later in commit_creds(). The test in setup_new_exec() is different
from all other privilege comparisons, though: it is checking the new cred
(bprm) uid vs the old cred (current) euid. This appears to be a bug,
introduced by commit a6f76f23d2 ("CRED: Make execve() take advantage of
copy-on-write credentials"):
- if (bprm->e_uid != current_euid() ||
- bprm->e_gid != current_egid()) {
- set_dumpable(current->mm, suid_dumpable);
+ if (bprm->cred->uid != current_euid() ||
+ bprm->cred->gid != current_egid()) {
It was bprm euid vs current euid (and egids), but the effective got
dropped. Nothing in the exec flow changes bprm->cred->uid (nor gid).
The call traces are:
prepare_bprm_creds()
prepare_exec_creds()
prepare_creds()
memcpy(new_creds, old_creds, ...)
security_prepare_creds() (unimplemented by commoncap)
...
prepare_binprm()
bprm_fill_uid()
resets euid/egid to current euid/egid
sets euid/egid on bprm based on set*id file bits
security_bprm_set_creds()
cap_bprm_set_creds()
handle all caps-based manipulations
so this test is effectively a test of current_uid() vs current_euid(),
which is wrong, just like the prior dumpability tests were wrong.
The commit log says "Clear pdeath_signal and set dumpable on
certain circumstances that may not be covered by commit_creds()." This
may be meaning the earlier old euid vs new euid (and egid) test that
got changed.
Luckily, as with dumpability, this is all masked by commit_creds()
which performs old/new euid and egid tests and clears pdeath_signal.
And again, like dumpability, we should include LSM secureexec logic for
pdeath_signal clearing. For example, Smack goes out of its way to clear
pdeath_signal when it finds a secureexec condition.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
The examination of "current" to decide dumpability is wrong. This was a
check of and euid/uid (or egid/gid) mismatch in the existing process,
not the newly created one. This appears to stretch back into even the
"history.git" tree. Luckily, dumpability is later set in commit_creds().
In earlier kernel versions before creds existed, similar checks also
existed late in the exec flow, covering up the mistake as far back as I
could find.
Note that because the commit_creds() check examines differences of euid,
uid, egid, gid, and capabilities between the old and new creds, it would
look like the setup_new_exec() dumpability test could be entirely removed.
However, the secureexec test may cover a different set of tests (specific
to the LSMs) than what commit_creds() checks for. So, fix this test to
use secureexec (the removed euid tests are redundant to the commoncap
secureexec checks now).
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
This removes the bprm_secureexec hook since the logic has been folded into
the bprm_set_creds hook for all LSMs now.
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
The commoncap implementation of the bprm_secureexec hook is the only LSM
that depends on the final call to its bprm_set_creds hook (since it may
be called for multiple files, it ignores bprm->called_set_creds). As a
result, it cannot safely _clear_ bprm->secureexec since other LSMs may
have set it. Instead, remove the bprm_secureexec hook by introducing a
new flag to bprm specific to commoncap: cap_elevated. This is similar to
cap_effective, but that is used for a specific subset of elevated
privileges, and exists solely to track state from bprm_set_creds to
bprm_secureexec. As such, it will be removed in the next patch.
Here, set the new bprm->cap_elevated flag when setuid/setgid has happened
from bprm_fill_uid() or fscapabilities have been prepared. This temporarily
moves the bprm_secureexec hook to a static inline. The helper will be
removed in the next patch; this makes the step easier to review and bisect,
since this does not introduce any changes to inputs nor outputs to the
"elevated privileges" calculation.
The new flag is merged with the bprm->secureexec flag in setup_new_exec()
since this marks the end of any further prepare_binprm() calls.
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
The bprm_secureexec hook can be moved earlier. Right now, it is called
during create_elf_tables(), via load_binary(), via search_binary_handler(),
via exec_binprm(). Nearly all (see exception below) state used by
bprm_secureexec is created during the bprm_set_creds hook, called from
prepare_binprm().
For all LSMs (except commoncaps described next), only the first execution
of bprm_set_creds takes any effect (they all check bprm->called_set_creds
which prepare_binprm() sets after the first call to the bprm_set_creds
hook). However, all these LSMs also only do anything with bprm_secureexec
when they detected a secure state during their first run of bprm_set_creds.
Therefore, it is functionally identical to move the detection into
bprm_set_creds, since the results from secureexec here only need to be
based on the first call to the LSM's bprm_set_creds hook.
The single exception is that the commoncaps secureexec hook also examines
euid/uid and egid/gid differences which are controlled by bprm_fill_uid(),
via prepare_binprm(), which can be called multiple times (e.g.
binfmt_script, binfmt_misc), and may clear the euid/egid for the final
load (i.e. the script interpreter). However, while commoncaps specifically
ignores bprm->cred_prepared, and runs its bprm_set_creds hook each time
prepare_binprm() may get called, it needs to base the secureexec decision
on the final call to bprm_set_creds. As a result, it will need special
handling.
To begin this refactoring, this adds the secureexec flag to the bprm
struct, and calls the secureexec hook during setup_new_exec(). This is
safe since all the cred work is finished (and past the point of no return).
This explicit call will be removed in later patches once the hook has been
removed.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
In commit 221af7f87b ("Split 'flush_old_exec' into two functions"),
the comment about the point of no return should have stayed in
flush_old_exec() since it refers to "bprm->mm = NULL;" line, but prior
changes in commits c89681ed7d ("remove steal_locks()"), and
fd8328be87 ("sanitize handling of shared descriptor tables in failing
execve()") made it look like it meant the current->sas_ss_sp line instead.
The comment was referring to the fact that once bprm->mm is NULL, all
failures from a binfmt load_binary hook (e.g. load_elf_binary), will
get SEGV raised against current. Move this comment and expand the
explanation a bit, putting it above the assignment this time, and add
details about the true nature of "point of no return" being the call
to flush_old_exec() itself.
This also removes an erroneous commet about when credentials are being
installed. That has its own dedicated function, install_exec_creds(),
which carries a similar (and correct) comment, so remove the bogus comment
where installation is not actually happening.
Cc: David Howells <dhowells@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
The cred_prepared bprm flag has a misleading name. It has nothing to do
with the bprm_prepare_cred hook, and actually tracks if bprm_set_creds has
been called. Rename this flag and improve its comment.
Cc: David Howells <dhowells@redhat.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
