Commit Graph

1073 Commits

Author SHA1 Message Date
Carlos R. Mafra c24b513337 perf: "Longum est iter per praecepta, breve et efficax per exempla"
A few examples of how 'perf' can be used, from an e-mail by
Ingo Molnar http://lkml.org/lkml/2009/8/4/346.

Signed-off-by: Carlos R. Mafra <crmafra2@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Valdis.Kletnieks@vt.edu
LKML-Reference: <20090805185334.GA4535@Pilar.aei.mpg.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:46 +02:00
Frederic Weisbecker 25446036cb perf tools: callchain: Fix sum of percentages to be 100% by displaying amount of ignored chains in fractal mode
When we filter the callchains below a given percentage, we
ignore them and the end result only shows entries that have an
upper percentage than the filter threshold.

It seems to users then that we have an imbalance in the
percentage, as if the sum inside a profiled branch doesn't
reach 100%.

Since in the past there have been real perf report bugs that
showed the same sypmtom, it would be nice to assure the user
that the data is perfect and trustable and it all sums up to
100.00%.

So fix this by displaying the remaining hits that have been
filtered but without more detail than their amount in each
branches. Example while filtering below 50%:

7.73%  [k] delay_tsc
                |
                |--98.22%-- __const_udelay
                |          |
                |          |--86.37%-- ath5k_hw_register_timeout
                |          |          ath5k_hw_noise_floor_calibration
                |          |          ath5k_hw_reset
                |          |          ath5k_reset
                |          |          ath5k_config
                |          |          ieee80211_hw_config
                |          |          |
                |          |          |--88.53%-- ieee80211_scan_work
                |          |          |          worker_thread
                |          |          |          kthread
                |          |          |          child_rip
                |          |           --11.47%-- [...]
                |           --13.63%-- [...]
                 --1.78%-- [...]

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:43 +02:00
Frederic Weisbecker b1a88349c3 perf tools: callchain: Fix 'perf report' display to be callchain by default
If we recorded with -g option to record the callchain, right now
we require a -g option to perf report as well - and people reported
this as unnecessary complication: the user already specified -g
once, no need to require it a second time.

So if the recording includes call-chains, display the callchain by
default from perf report.

( The user can override this default using "-g none" option from
  perf report. )

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:42 +02:00
Frederic Weisbecker b0efe213f8 perf tools: callchain: Fix spurious 'perf report' warnings: ignore empty callchains
When the callchain tree comes to insert an empty backtrace, it
raises a spurious warning about the fact we are inserting an
empty. This is spurious because the radix tree assumes it did
something wrong to reach this state. But it didn't, we just met
an empty callchain that has to be ignored.

This happens occasionally with certain types of call-chain
recordings. If it happens it's a big nuisance as perf report
output starts with thousands of warning lines.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:41 +02:00
Pierre Habouzit 266e0e2198 perf record: Fix the -A UI for empty or non-existent perf.data
1. Ignore the -A argument if there is no perf.data file
2. Treat an empty file like a non existent file.

Else, perf will try to read the perf.data header, and fail with
an error.

Treating an empty file like a non-existent file makes sense,
since an interupted (as in SIGKILLed) perf could leave such
files around, and you don't want to annoy the user with errors
for files with no data in it.

Signed-off-by: Pierre Habouzit <pierre.habouzit@intersec.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:40 +02:00
Pierre Habouzit 7eac7e9e72 perf util: Fix do_read() to fail on EOF instead of busy-looping
While toying with perf, I've noticed that perf record can
easily enter a busy loop when doing something as silly as:

    $ perf record -A ls

Yeah, do_read here really wants to read a known size, not being
able to should die(), not busy-loop ;)

That was the cause for the bug.

Signed-off-by: Pierre Habouzit <pierre.habouzit@intersec.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:39 +02:00
Peter Zijlstra ae07b63f4b perf list: Fix the output to not include tracepoints without an id
Stop perf list from displaying tracepoints without an id file,
those are special tracepoints that are not interfaced to
perfcounters so listing them is erroneous and passing them as
events will produce no output.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:38 +02:00
Brice Goglin b26bc5a7f8 perf stat: Fix tool option consistency: rename -S/--scale to -c/--scale
We want to use a coherent flag for -S/--stat across all tools,
so free up -S in perf stat.

Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:37 +02:00
Arnaldo Carvalho de Melo 94cb9e385d perf report: Add debug help for the finding of symbol bugs - show the symtab origin (DSO, build-id, kernel, etc)
Used with perf report --verbose:

[acme@doppio linux-2.6-tip]$ perf report -v | head -16
     5.17%  firefox  /usr/lib64/xulrunner-1.9.1/libxul.so   0x00000000005d8eee f [.] imgContainer::DrawFrameTo(gfxIImageFrame*, gfxIImageFrame*, nsRect&)
     2.56%  firefox  /lib64/libpthread-2.10.1.so            0x0000000000008e02 d [.] __pthread_mutex_lock_internal
     1.94%  firefox  /usr/lib64/xulrunner-1.9.1/libxul.so   0x0000000000d0af8f f [.] SearchTable
     1.75%  firefox  [kernel]                               0xffffffffff60013b k [.] vread_hpet
     1.63%  firefox  /lib64/libpthread-2.10.1.so            0x000000000000a404 d [.] __pthread_mutex_unlock
     1.47%  firefox  /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x00000000000482ea f [.] js_Interpret
     1.42%  firefox  /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x000000000003eda3 f [.] JS_CallTracer
     1.24%  firefox  [kernel]                               0xffffffff8102ca4a k [k] read_hpet
     1.16%  firefox  [kernel]                               0xffffffff810f3dd4 k [k] fget_light
     1.11%  firefox  /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x00000000000567ff f [.] js_TraceObject
     0.98%  firefox  /usr/lib64/firefox-3.5.2/firefox       0x000000000000dd23 b [.] arena_ralloc
[acme@doppio linux-2.6-tip]$

The new field is just after the symbol address. To help in
figuring out symbol resolution bugs.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:36 +02:00
Peter Zijlstra 8f18aec535 perf report: Fix per task mult-counter stat reporting
Brice Goglin reported:

> I can easily sort them by thread id, but I don't know how to match
> my 4 events with each group of 4 lines.

Also report the counter id and the time running/enabled
stats (in case the counter got time-shared).

Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:35 +02:00
Peter Zijlstra 1c222bce7d perf tools: Fix multi-counter stat bug caused by incorrect reading of perf.data file header
Brice Goglin reported that only the first result from a
multi-counter perf record --stat run is accurate, the
rest looks bogus.

A silly mistake made us re-read the first attribute for
every recorded attribute.

Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Cc: paulus@samba.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:34 +02:00
Frederic Weisbecker 1953287bfe perf tools: Fix call-chain cumul hit based sub-total (fractal mode)
The callchain fractal mode builds each new total hits in a new
branch of profiling by using the parent's hits of the current
branch plus the hits of the children.

This is wrong, the total hits of a branch should be made of the
sum of every children hits, we must ignore the parent hits in
this scope.

This patch also fixes another mistake with the hit counting.

Now the rates are correct.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:33 +02:00
Mike Galbraith 8361798348 perf top: Update man page
perf_counter tools: update perf top manual page to reflect
current implementation.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:32 +02:00
Mike Galbraith 091bd2e993 perf top: Improve interactive key handling
Pressing any key which is not currently mapped to
functionality, based on startup command line options, displays
currently mapped keys, and prompts for input.

Pressing any unmapped key at the prompt returns the user to
display mode with variables unchanged.  eg, pressing ? <SPACE>
<ESC> etc displays currently available keys, the value of the
variable associated with that key, and prompts.

Pressing same again aborts input.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:31 +02:00
Mike Galbraith 46ab976443 perf_counter tools: Allow perf top top users to switch between weighted and individual counter display
Add [w]eighted hotkey.  Pressing [w] toggles between displaying
weighted total of all counters, and the counter selected via
[E]vent select key.

------------------------------------------------------------------------------
   PerfTop:   90395 irqs/sec  kernel:16.1% [cache-misses/cache-references/instructions],  (all, 4 CPUs)
------------------------------------------------------------------------------

  weight     samples    pcnt         RIP          kernel function
  ______     _______   _____   ________________   _______________

1275408.6      10881 -  5.3% - ffffffff81146f70 : copy_page_c
 553683.4      43569 - 21.3% - ffffffff81146f20 : clear_page_c
  74075.0       6768 -  3.3% - ffffffff81147190 : copy_user_generic_string
  40602.9       7538 -  3.7% - ffffffff81284ba2 : _spin_lock
  26882.1        965 -  0.5% - ffffffff8109d280 : file_ra_state_init

[w]

------------------------------------------------------------------------------
   PerfTop:   91221 irqs/sec  kernel:14.5% [10000Hz cache-misses],  (all, 4 CPUs)
------------------------------------------------------------------------------

  weight     samples    pcnt         RIP          kernel function
  ______     _______   _____   ________________   _______________

            47320.00 - 22.3% - ffffffff81146f20 : clear_page_c
            14261.00 -  6.7% - ffffffff810992f5 : __rmqueue
            11046.00 -  5.2% - ffffffff81146f70 : copy_page_c
             7842.00 -  3.7% - ffffffff81284ba2 : _spin_lock
             7234.00 -  3.4% - ffffffff810aa1d6 : unmap_vmas

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:30 +02:00
Mike Galbraith 923c42c199 perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.

This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.

known keys:
        [d]     select display delay.
        [e]     select display entries (lines).
        [E]     select annotation event counter.
        [f]     select normal display count filter.
        [F]     select annotation display count filter (percentage).
        [qQ]    quit.
        [s]     select annotation symbol and start annotation.
        [S]     stop annotation, revert to normal display.
        [z]     toggle event count zeroing.

Sample:
------------------------------------------------------------------------------
   PerfTop:   16719 irqs/sec  kernel:78.7% [cache-misses/cache-references/instructions/cycles],  (all, 4 CPUs)
------------------------------------------------------------------------------

Showing cache-misses for e1000_clean_rx_irq
  Events  Pcnt (>=3%)
       0  0.0%                  /* adjust length to remove Ethernet CRC */
       0  0.0%                  if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
       0  0.0%                          length -= 4;
     436  5.0%      f039:       41 f6 84 24 5c 29 00    testb  $0x1,0x295c(%r12)
       0  0.0%      f089:       8b 4d 84                mov    -0x7c(%rbp),%ecx
       0  0.0%      f08c:       48 83 ef 02             sub    $0x2,%rdi
       0  0.0%      f090:       48 83 ee 02             sub    $0x2,%rsi
     811  9.3%      f094:       f3 a4                   rep movsb %ds:(%rsi),%es:(%rdi)
       0  0.0%
       0  0.0%          while (rx_desc->status & E1000_RXD_STAT_DD) {
       0  0.0%      f114:       41 f6 47 0c 01          testb  $0x1,0xc(%r15)
    7226 82.6%      f119:       0f 85 24 fe ff ff       jne    ef43 <e1000_clean_rx_irq+0x84>

Available events:
        0 cache-misses
        1 cache-references
        2 instructions
        3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
   PerfTop:   15035 irqs/sec  kernel:79.0% [cache-misses/cache-references/instructions/cycles],  (all, 4 CPUs)
------------------------------------------------------------------------------

Showing instructions for e1000_clean_rx_irq
  Events  Pcnt (>=3%)
       0  0.0%                                 int *work_done, int work_to_do)
       0  0.0%  {
     175  0.9%      eebf:       55                      push   %rbp
    1898  9.8%      eec0:       48 89 e5                mov    %rsp,%rbp
       0  0.0%
       0  0.0%          i = rx_ring->next_to_clean;
     140  0.7%      ef0a:       0f b7 41 1a             movzwl 0x1a(%rcx),%eax
     670  3.4%      ef0e:       89 45 ac                mov    %eax,-0x54(%rbp)
       0  0.0%  {
       0  0.0%          memcpy(skb->data + offset, from, len);
      91  0.5%      f07b:       49 8b b6 e8 00 00 00    mov    0xe8(%r14),%rsi
    1153  5.9%      f082:       48 8b b8 e8 00 00 00    mov    0xe8(%rax),%rdi
      42  0.2%      f089:       8b 4d 84                mov    -0x7c(%rbp),%ecx
      14  0.1%      f08c:       48 83 ef 02             sub    $0x2,%rdi
       0  0.0%      f090:       48 83 ee 02             sub    $0x2,%rsi
    1618  8.3%      f094:       f3 a4                   rep movsb %ds:(%rsi),%es:(%rdi)
       0  0.0%
       0  0.0%                  /* return some buffers to hardware, one at a time is too slow */
       0  0.0%                  if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
     867  4.5%      f0e7:       83 7d b0 0f             cmpl   $0xf,-0x50(%rbp)
       0  0.0%
       0  0.0%          while (rx_desc->status & E1000_RXD_STAT_DD) {
      37  0.2%      f114:       41 f6 47 0c 01          testb  $0x1,0xc(%r15)
    4047 20.8%      f119:       0f 85 24 fe ff ff       jne    ef43 <e1000_clean_rx_irq+0x84>

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:29 +02:00
Frederic Weisbecker f413cdb80c perf_counter: Fix/complete ftrace event records sampling
This patch implements the kernel side support for ftrace event
record sampling.

A new counter sampling attribute is added:

   PERF_SAMPLE_TP_RECORD

which requests ftrace events record sampling. In this case
if a PERF_TYPE_TRACEPOINT counter is active and a tracepoint
fires, we emit the tracepoint binary record to the
perfcounter event buffer, as a sample.

Result, after setting PERF_SAMPLE_TP_RECORD attribute from perf
record:

 perf record -f -F 1 -a -e workqueue:workqueue_execution
 perf report -D

 0x21e18 [0x48]: event: 9
 .
 . ... raw event: size 72 bytes
 .  0000:  09 00 00 00 01 00 48 00 d0 c7 00 81 ff ff ff ff  ......H........
 .  0010:  0a 00 00 00 0a 00 00 00 21 00 00 00 00 00 00 00  ........!......
 .  0020:  2b 00 01 02 0a 00 00 00 0a 00 00 00 65 76 65 6e  +...........eve
 .  0030:  74 73 2f 31 00 00 00 00 00 00 00 00 0a 00 00 00  ts/1...........
 .  0040:  e0 b1 31 81 ff ff ff ff                          .......
.
0x21e18 [0x48]: PERF_EVENT_SAMPLE (IP, 1): 10: 0xffffffff8100c7d0 period: 33

The raw ftrace binary record starts at offset 0020.

Translation:

 struct trace_entry {
	type		= 0x2b = 43;
	flags		= 1;
	preempt_count	= 2;
	pid		= 0xa = 10;
	tgid		= 0xa = 10;
 }

 thread_comm = "events/1"
 thread_pid  = 0xa = 10;
 func	    = 0xffffffff8131b1e0 = flush_to_ldisc()

What will come next?

 - Userspace support ('perf trace'), 'flight data recorder' mode
   for perf trace, etc.

 - The unconditional copy from the profiling callback brings
   some costs however if someone wants no such sampling to
   occur, and needs to be fixed in the future. For that we need
   to have an instant access to the perf counter attribute.
   This is a matter of a flag to add in the struct ftrace_event.

 - Take care of the events recursivity! Don't ever try to record
   a lock event for example, it seems some locking is used in
   the profiling fast path and lead to a tracing recursivity.
   That will be fixed using raw spinlock or recursivity
   protection.

 - [...]

 - Profit! :-)

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:53:48 +02:00
Peter Zijlstra 9424edc2da perf: Auto-detect libelf
Adds autodetection for libelf as well, and simplifies the
libbfd code. Furthermore, fail make with an error when libelf
is not found and warn about the lack of libbfd.

Also provide an option to build a 32bit version even though you
might be running a 64bit kernel.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-06 20:25:13 +02:00
Arnaldo Carvalho de Melo 4d1e00a8af perf symbol: Fix symbol parsing in certain cases: use the build-id as a symlink
In some cases distros have binaries and debuginfo in weird places:

[root@doppio tuna]# ls -la /usr/lib64/{xulrunner-1.9.1/xulrunner-stub,firefox-3.5.2/firefox}
-rwxr-xr-x 1 root root 90024 2009-08-03 19:45 /usr/lib64/firefox-3.5.2/firefox
-rwxr-xr-x 1 root root 90024 2009-08-03 18:23 /usr/lib64/xulrunner-1.9.1/xulrunner-stub
[root@doppio tuna]# sha1sum /usr/lib64/{xulrunner-1.9.1/xulrunner-stub,firefox-3.5.2/firefox}
19a858077d263d5de22c9c5da250d3e4396ae739  /usr/lib64/xulrunner-1.9.1/xulrunner-stub
19a858077d263d5de22c9c5da250d3e4396ae739  /usr/lib64/firefox-3.5.2/firefox
[root@doppio tuna]# rpm -qf /usr/lib64/{xulrunner-1.9.1/xulrunner-stub,firefox-3.5.2/firefox}
xulrunner-1.9.1.2-1.fc11.x86_64
firefox-3.5.2-2.fc11.x86_64
[root@doppio tuna]# ls -la /usr/lib/debug/{usr/lib64/xulrunner-1.9.1/xulrunner-stub,usr/lib64/firefox-3.5.2/firefox}.debug
ls: cannot access /usr/lib/debug/usr/lib64/firefox-3.5.2/firefox.debug: No such file or directory
-rwxr-xr-x 1 root root 403608 2009-08-03 18:22 /usr/lib/debug/usr/lib64/xulrunner-1.9.1/xulrunner-stub.debug

Seemingly we don't have a .symtab when we actually can find it
if we use the .note.gnu.build-id ELF section put in place by
some distros. Use it and find the symbols we need.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-06 20:24:37 +02:00
Arnaldo Carvalho de Melo 386c0b702b perf report: Add missing command line options to man page
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090805130453.GC10688@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-05 16:09:28 +02:00
Peter Zijlstra 2cdbc46d7b perf: Auto-detect libbfd
Since the C++ demangling isn't needed for everybody and
bfd/iberty aren't widely/easily available on all machines, make
it optional.

It also allows you to forcefully disable demangling by using
NO_DEMANGLE=1 and otherwise tries to detect libbfd/libiberty
combinations that result in a compiling demangler.

Reported-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
LKML-Reference: <20090801082048.GX12579@kernel.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-05 14:12:08 +02:00
Pekka Enberg 114cfab222 perf report: Make --sort comm,dso,symbol the default
If you're doing performance testing, you're interested in the
symbols anyway so lets make "--sort comm,dso,symbol" the
default sort option.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: acme@redhat.com
LKML-Reference: <1249467921-10450-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-05 13:16:04 +02:00
Roel Kluin 7e030655dd perf: Fix read buffer overflow
Check whether index is within bounds before testing the element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: a.p.zijlstra@chello.nl
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A757BCF.40101@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04 11:09:56 +02:00
Arnaldo Carvalho de Melo 59b9005692 perf top: Add mwait_idle_with_hints to skip_symbols[]
We skip the display of idle routine related symbols because
they are typically rather erratic and confusing: they depend
on the IRQ rate or sometimes they dominate the profile if
they are polling based.

Add mwait_idle_with_hints too, this is one of the idle
routines on x86.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02 13:58:16 +02:00
Stoyan Gaydarov 9b30a26bf3 perf tools: Fix faulty check
This patch fixes a spelling error that has resulted from copy
and pasting. The location of the error was found using a
semantic patch but the semantic patch was not trying to find
these errors. After looking things over it seemed logical that
this change was needed. Please review it and then include the
patch if it is in fact the correct change.

Signed-off-by: Stoyan Gaydarov <sgayda2@uiuc.edu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1248949529-20891-1-git-send-email-sgayda2@uiuc.edu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02 13:47:59 +02:00
Peter Zijlstra 27d028de64 perf report: Update for the new FORK/EXIT events
Since FORK is now also issued for threads, detect those by
comparing the parent and child PID.

Teach it about EXIT events and ignore them.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02 13:47:57 +02:00
Ingo Molnar 2d1b6949d2 perf_counter tools: Fix link errors with older toolchains
On older distros (F8 for example) the perf build could fail
with such missing symbols:

    LINK perf
/usr/lib/gcc/x86_64-redhat-linux/4.3.2/../../../../lib64/libbfd.a(bfd.o): In function `bfd_demangle':
(.text+0x2b3): undefined reference to `cplus_demangle'
/usr/lib/gcc/x86_64-redhat-linux/4.3.2/../../../../lib64/libbfd.a(bfd.o): In function `bfd_demangle':

Link in -liberty too.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-01 13:15:36 +02:00
Linus Torvalds 3c3301083e Merge branch 'perf-counters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-perf
* 'perf-counters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-perf: (31 commits)
  perf_counter tools: Give perf top inherit option
  perf_counter tools: Fix vmlinux symbol generation breakage
  perf_counter: Detect debugfs location
  perf_counter: Add tracepoint support to perf list, perf stat
  perf symbol: C++ demangling
  perf: avoid structure size confusion by using a fixed size
  perf_counter: Fix throttle/unthrottle event logging
  perf_counter: Improve perf stat and perf record option parsing
  perf_counter: PERF_SAMPLE_ID and inherited counters
  perf_counter: Plug more stack leaks
  perf: Fix stack data leak
  perf_counter: Remove unused variables
  perf_counter: Make call graph option consistent
  perf_counter: Add perf record option to log addresses
  perf_counter: Log vfork as a fork event
  perf_counter: Synthesize VDSO mmap event
  perf_counter: Make sure we dont leak kernel memory to userspace
  perf_counter tools: Fix index boundary check
  perf_counter: Fix the tracepoint channel to perfcounters
  perf_counter, x86: Extend perf_counter Pentium M support
  ...
2009-07-22 11:41:56 -07:00
Mike Galbraith 0fdc7e67dd perf_counter tools: Give perf top inherit option
Currently, perf top -p only tracks the pid provided, which isn't very useful
for watching forky loads, so give it an inherit option.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1248165036.9795.10.camel@marge.simson.net>
2009-07-22 18:05:58 +02:00
Mike Galbraith d20ff6bd6b perf_counter tools: Fix vmlinux symbol generation breakage
vmlinux meets the criteria for symbol adjustment, which breaks vmlinux generated symbols.
Fix this by exempting vmlinux.  This is a bit fragile in that someone could change the
kernel dso's name, but currently that name is also hardwired.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1248091298.18702.18.camel@marge.simson.net>
2009-07-22 18:05:58 +02:00
Jason Baron 5beeded123 perf_counter: Detect debugfs location
If "/sys/kernel/debug" is not a debugfs mount point, search for the debugfs
filesystem in /proc/mounts, but also allows the user to specify
'--debugfs-dir=blah' or set the environment variable: 'PERF_DEBUGFS_DIR'

Signed-off-by: Jason Baron <jbaron@redhat.com>
[ also made it probe "/debug" by default ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090721181629.GA3094@redhat.com>
2009-07-22 18:05:57 +02:00
Jason Baron f6bdafef2a perf_counter: Add tracepoint support to perf list, perf stat
Add support to 'perf list' and 'perf stat' for kernel tracepoints. The
implementation creates a 'for_each_subsystem' and 'for_each_event' for
easy iteration over the tracepoints.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <426129bf9fcc8ee63bb094cf736e7316a7dcd77a.1248190728.git.jbaron@redhat.com>
2009-07-22 18:05:57 +02:00
Arnaldo Carvalho de Melo 28ac909b49 perf symbol: C++ demangling
[acme@doppio ~]$ perf report -s comm,dso,symbol -C firefox -d /usr/lib64/xulrunner-1.9.1/libxul.so | grep :: | head
     2.21%  [.] nsDeque::Push(void*)
     1.78%  [.] GraphWalker::DoWalk(nsDeque&)
     1.30%  [.] GCGraphBuilder::AddNode(void*, nsCycleCollectionParticipant*)
     1.27%  [.] XPCWrappedNative::CallMethod(XPCCallContext&, XPCWrappedNative::CallMode)
     1.18%  [.] imgContainer::DrawFrameTo(gfxIImageFrame*, gfxIImageFrame*, nsRect&)
     1.13%  [.] nsDeque::PopFront()
     1.11%  [.] nsGlobalWindow::RunTimeout(nsTimeout*)
     0.97%  [.] nsXPConnect::Traverse(void*, nsCycleCollectionTraversalCallback&)
     0.95%  [.] nsJSEventListener::cycleCollection::Traverse(void*, nsCycleCollectionTraversalCallback&)
     0.95%  [.] nsCOMPtr_base::~nsCOMPtr_base()
[acme@doppio ~]$

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Suggested-by: Clark Williams <williams@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090720171412.GB10410@ghostprotocols.net>
2009-07-22 18:05:57 +02:00
Arjan van de Ven dfe5a50461 perf: avoid structure size confusion by using a fixed size
for some reason, this structure gets compiled as 36 bytes in some files
(the ones that alloacte it) but 40 bytes in others (the ones that use it).
The cause is an off_t type that gets a different size in different
compilation units for some yet-to-be-explained reason.

But the effect is disasterous; the size/offset members of the struct
are at different offsets, and result in mostly complete garbage.
The parser in perf is so robust that this all gets hidden, and after
skipping an certain amount of samples, it recovers.... so this bug
is not normally noticed.

.... except when you want every sample to be exact.

Fix this by just using an explicitly sized type.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4A655917.9080504@linux.intel.com>
2009-07-22 18:05:57 +02:00
Anton Blanchard a0541234f8 perf_counter: Improve perf stat and perf record option parsing
perf stat and perf record currently look for all options on the command
line. This can lead to some confusion:

# perf stat ls -l
  Error: unknown switch `l'

While we can work around this by adding '--' before the command, the git
option parsing code can stop at the first non option:

# perf stat ls -l
 Performance counter stats for 'ls -l':
....

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090722130412.GD9029@kryten>
2009-07-22 18:05:56 +02:00
Peter Zijlstra 7f453c24b9 perf_counter: PERF_SAMPLE_ID and inherited counters
Anton noted that for inherited counters the counter-id as provided by
PERF_SAMPLE_ID isn't mappable to the id found through PERF_RECORD_ID
because each inherited counter gets its own id.

His suggestion was to always return the parent counter id, since that
is the primary counter id as exposed. However, these inherited
counters have a unique identifier so that events like
PERF_EVENT_PERIOD and PERF_EVENT_THROTTLE can be specific about which
counter gets modified, which is important when trying to normalize the
sample streams.

This patch removes PERF_EVENT_PERIOD in favour of PERF_SAMPLE_PERIOD,
which is more useful anyway, since changing periods became a lot more
common than initially thought -- rendering PERF_EVENT_PERIOD the less
useful solution (also, PERF_SAMPLE_PERIOD reports the more accurate
value, since it reports the value used to trigger the overflow,
whereas PERF_EVENT_PERIOD simply reports the requested period changed,
which might only take effect on the next cycle).

This still leaves us PERF_EVENT_THROTTLE to consider, but since that
_should_ be a rare occurrence, and linking it to a primary id is the
most useful bit to diagnose the problem, we introduce a
PERF_SAMPLE_STREAM_ID, for those few cases where the full
reconstruction is important.

[Does change the ABI a little, but I see no other way out]

Suggested-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1248095846.15751.8781.camel@twins>
2009-07-22 18:05:56 +02:00
Peter Zijlstra 1d2f37945d Merge commit 'tip/perfcounters/core' into perf-counters-for-linus 2009-07-22 18:05:48 +02:00
Anton Blanchard 1483b19f8f perf_counter: Make call graph option consistent
perf record uses -g for logging call graph data but perf report
uses -c to print call graph data. Be consistent and use -g
everywhere for call graph data.

Also update the help text to reflect the current default -
fractal,0.5

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090716104817.803604373@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-18 11:21:33 +02:00
Anton Blanchard 4bba828dd9 perf_counter: Add perf record option to log addresses
Add the -d or --data option to log event addresses (eg page
faults).

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090716104817.697698033@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-18 11:21:32 +02:00
Anton Blanchard 11b5f81e1b perf_counter: Synthesize VDSO mmap event
perf record synthesizes mmap events for the running process.
Right now it just catches file mappings, but we can check for
the vdso symbol and add that too.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090716104817.517264409@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-18 11:21:30 +02:00
Roel Kluin 23cdb5d517 perf_counter tools: Fix index boundary check
Keep index within event_type_descriptors[]

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A5A7F0B.4070106@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-13 10:58:28 +02:00
Arnaldo Carvalho de Melo e3d7e183dc perf report: Introduce -n/--show-nr-samples
[acme@doppio pahole]$ perf report -ns comm,dso,symbol -d /lib64/libc-2.10.1.so -C pahole | head -17
    21.94%      32101  [.] _int_malloc
    20.10%      29402  [.] __GI_strcmp
    16.77%      24533  [.] __tsearch
    12.61%      18450  [.] malloc_consolidate
     6.42%       9394  [.] _int_free
     6.28%       9191  [.] __tfind
     4.56%       6678  [.] __GI___libc_free
     4.46%       6520  [.] _IO_vfprintf_internal
     2.59%       3786  [.] __malloc
     1.17%       1716  [.] __GI_memcpy
[acme@doppio pahole]$

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1247325517-12272-5-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11 19:20:27 +02:00
Arnaldo Carvalho de Melo a25e46c463 perf_counter tools: PLT info is stripped in -debuginfo packages
So we need to get the richer .symtab from the debuginfo
packages but the PLT info from the original DSO where we have
just the leaner .dynsym symtab.

Example:

| [acme@doppio pahole]$ perf report --sort comm,dso,symbol > before
| [acme@doppio pahole]$ perf report --sort comm,dso,symbol > after
| [acme@doppio pahole]$ diff -U1 before after
| --- before	2009-07-11 11:04:22.688595741 -0300
| +++ after	2009-07-11 11:04:33.380595676 -0300
| @@ -80,3 +80,2 @@
|       0.07%  pahole ./build/pahole              [.] pahole_stealer
| -     0.06%  pahole /usr/lib64/libdw-0.141.so   [.] 0x00000000007140
|       0.06%  pahole /usr/lib64/libdw-0.141.so   [.] __libdw_getabbrev
| @@ -91,2 +90,3 @@
|       0.06%  pahole [kernel]                    [k] free_hot_cold_page
| +     0.06%  pahole /usr/lib64/libdw-0.141.so   [.] tfind@plt
|       0.05%  pahole ./build/libdwarves.so.1.0.0 [.] ftype__add_parameter
| @@ -242,2 +242,3 @@
|       0.01%  pahole [kernel]                    [k] account_group_user_time
| +     0.01%  pahole /usr/lib64/libdw-0.141.so   [.] strlen@plt
|       0.01%  pahole ./build/pahole              [.] strcmp@plt
| [acme@doppio pahole]$

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1247325517-12272-4-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11 19:20:26 +02:00
Arnaldo Carvalho de Melo 021191b35c perf report: Make the output more compact
When we filter by column content we may end up with a column
that has the same value for all the lines. So remove that
column and tell its unique value on the top, as a comment.

Example:

  [acme@doppio pahole]$  perf report --sort comm,dso,symbol -d ./build/libdwarves.so.1.0.0 -C pahole | head -15
  # dso: ./build/libdwarves.so.1.0.0
  # comm: pahole
  # Samples: 58409
  #
  # Overhead  Symbol
  # ........  ......
  #
      20.93%  [.] tag__recode_dwarf_type
      14.94%  [.] namespace__recode_dwarf_types
      10.38%  [.] cu__table_add_tag
       6.69%  [.] __die__process_tag
       5.05%  [.] die__process_function
       4.70%  [.] list__for_all_tags
       3.68%  [.] tag__init
       3.48%  [.] die__create_new_parameter
  [acme@doppio pahole]$

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1247325517-12272-3-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11 19:20:26 +02:00
Arnaldo Carvalho de Melo 27d0fd410c strlist: Introduce strlist__entry and strlist__nr_entries methods
The strlist__entry method allows accessing strlists like an
array, will be used in the 'perf report' to access the first
entry.

We now keep the nr_entries so that we can check if we have just
one entry, will be used in 'perf report' to improve the output
by showing just at the top when we have just, say, one DSO.

While at it use nr_entries to optimize strlist__is_empty by not
using the far more costly rb_first based implementation.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1247325517-12272-2-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11 19:20:25 +02:00
Arnaldo Carvalho de Melo 60c1baf124 perf report: Tidy up reporting of symbols not found
Always printing the level info about if it is in the kernel,
hypervisor or userspace as that is in the hist_entry.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1247325517-12272-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11 19:20:25 +02:00
Arnaldo Carvalho de Melo 52d422de22 perf report: Adjust column width to the values sampled
Auto-adjust column width of perf report output to the
longest occuring string length.

Example:

[acme@doppio pahole]$  perf report --sort comm,dso,symbol | head -13

    12.79%   pahole  /usr/lib64/libdw-0.141.so    [.] __libdw_find_attr
     8.90%   pahole  /lib64/libc-2.10.1.so        [.] _int_malloc
     8.68%   pahole  /usr/lib64/libdw-0.141.so    [.] __libdw_form_val_len
     8.15%   pahole  /lib64/libc-2.10.1.so        [.] __GI_strcmp
     6.80%   pahole  /lib64/libc-2.10.1.so        [.] __tsearch
     5.54%   pahole  ./build/libdwarves.so.1.0.0  [.] tag__recode_dwarf_type
[acme@doppio pahole]$

[acme@doppio pahole]$  perf report --sort comm,dso,symbol -d /lib64/libc-2.10.1.so | head -10

    21.92%   pahole  /lib64/libc-2.10.1.so  [.] _int_malloc
    20.08%   pahole  /lib64/libc-2.10.1.so  [.] __GI_strcmp
    16.75%   pahole  /lib64/libc-2.10.1.so  [.] __tsearch
[acme@doppio pahole]$

Also add these extra options to control the new behaviour:

  -w, --field-width

Force each column width to the provided list, for large terminal
readability.

  -t, --field-separator:

Use a special separator character and don't pad with spaces, replacing
all occurances of this separator in symbol names (and other output) with
a '.' character, that thus it's the only non valid separator.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090711014728.GH3452@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11 10:24:11 +02:00
Linus Torvalds 85be928c41 Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
  perf report: Add "Fractal" mode output - support callchains with relative overhead rate
  perf_counter tools: callchains: Manage the cumul hits on the fly
  perf report: Change default callchain parameters
  perf report: Use a modifiable string for default callchain options
  perf report: Warn on callchain output request from non-callchain file
  x86: atomic64: Inline atomic64_read() again
  x86: atomic64: Clean up atomic64_sub_and_test() and atomic64_add_negative()
  x86: atomic64: Improve atomic64_xchg()
  x86: atomic64: Export APIs to modules
  x86: atomic64: Improve atomic64_read()
  x86: atomic64: Code atomic(64)_read and atomic(64)_set in C not CPP
  x86: atomic64: Fix unclean type use in atomic64_xchg()
  x86: atomic64: Make atomic_read() type-safe
  x86: atomic64: Reduce size of functions
  x86: atomic64: Improve atomic64_add_return()
  x86: atomic64: Improve cmpxchg8b()
  x86: atomic64: Improve atomic64_read()
  x86: atomic64: Move the 32-bit atomic64_t implementation to a .c file
  x86: atomic64: The atomic64_t data type should be 8 bytes aligned on 32-bit too
  perf report: Annotate variable initialization
  ...
2009-07-10 14:25:03 -07:00
Vince Weaver 11d1578f94 perf_counter: Add P6 PMU support
Add basic P6 PMU support. The P6 uses the EVNTSEL0 EN bit to
enable/disable both its counters. We use this for the
global enable/disable, and clear all config bits (except EN)
to disable individual counters.

Actual ia32 hardware doesn't support lfence, so use a locked
op without side-effect to implement a full barrier.

perf stat and perf record seem to function correctly.

[a.p.zijlstra@chello.nl: cleanups and complete the enable/disable code]

Signed-off-by: Vince Weaver <vince@deater.net>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <Pine.LNX.4.64.0907081718450.2715@pianoman.cluster.toy>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-10 10:28:26 +02:00
Anton Blanchard 9590b7ba3f perf_counter tools: Rename cache events to remove $
The cache events contain '$' which will hit shell variable
expansion. To avoid confusion change this to 'cache', ie
L1-d$-loads becomes L1-dcache-loads.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090706120131.GB4391@kryten>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-10 10:04:06 +02:00
Frederic Weisbecker 805d127d62 perf report: Add "Fractal" mode output - support callchains with relative overhead rate
The current callchain displays the overhead rates as absolute:
relative to the total overhead.

This patch provides relative overhead percentage, in which each
branch of the callchain tree is a independant instrumentated object.

This provides a 'fractal' view of the call-chain profile: each
sub-graph looks like a profile in itself - relative to its parent.

You can produce such output by using the "fractal" mode
that you can abbreviate via f, fr, fra, frac, etc...

./perf report -s sym -c fractal

Example:

     8.46%  [k] copy_user_generic_string
                |
                |--52.01%-- generic_file_aio_read
                |          do_sync_read
                |          vfs_read
                |          |
                |          |--97.20%-- sys_pread64
                |          |          system_call_fastpath
                |          |          pread64
                |          |
                |           --2.81%-- sys_read
                |                     system_call_fastpath
                |                     __read
                |
                |--39.85%-- generic_file_buffered_write
                |          __generic_file_aio_write_nolock
                |          generic_file_aio_write
                |          do_sync_write
                |          reiserfs_file_write
                |          vfs_write
                |          |
                |          |--97.05%-- sys_pwrite64
                |          |          system_call_fastpath
                |          |          __pwrite64
                |          |
                |           --2.95%-- sys_write
                |                     system_call_fastpath
                |                     __write_nocancel
[...]

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-05 10:30:23 +02:00
Frederic Weisbecker e05b876c22 perf_counter tools: callchains: Manage the cumul hits on the fly
The cumul hits are the number of hits of every childs of a node
plus the hits of the current nodes, required for percentage
computing of a branch.

Theses numbers are calculated during the sorting of the branches of
the callchain tree using a depth first postfix traversal, so that
cumulative hits are propagated in the right order.

But if we plan to implement percentages relative to the parent and not
absolute percentages (relative to the whole overhead), we need to know
the cumulative hits of the parent before computing the children
because the relative minimum acceptable number of entries (ie: minimum
rate against the cumulative hits from the parent) is the basis to
filter the children against a given rate.

Then we need to handle the cumul hits on the fly to prepare the
implementation of relative overhead rates.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-05 10:30:22 +02:00
Frederic Weisbecker 94a8eb028a perf report: Change default callchain parameters
The default callchain parameters are set to use the flat mode and never
filter any overhead threshold of backtrace.

But flat mode is boring compared to graph mode.
Also the number of callchains may be very high if none is
filtered.

Let's change this to set the graph view and a minimum overhead of 0.5%
as default parameters.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-05 10:30:22 +02:00
Frederic Weisbecker be9038859e perf report: Use a modifiable string for default callchain options
If the user doesn't provide options to tune his callchain output
(ie: if he uses -c without arguments) then the default value passed
in the OPT_CALLBACK_DEFAULT() macro is used.

But it's parsed later by strtok() which will replace comma separators
to a zero. This may segfault as we are using a read-only string.

Use a modifiable one instead, and also fix the "100%" default
minimum threshold value by turning it into a 0 (output every callchains)
as it was intended in the origin.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-05 10:30:21 +02:00
Frederic Weisbecker 91b4eaea93 perf report: Warn on callchain output request from non-callchain file
perf report segfaults while trying to handle callchains from a non
callchain data file.

Instead of a segfault, print a useful message to the user.

Reported-by: Jens Axboe <jens.axboe@oracle.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-05 10:30:21 +02:00
Linus Torvalds de481ba925 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: (27 commits)
  parisc: use generic atomic64 on 32-bit
  parisc: superio: fix build breakage
  parisc: Fix PCI resource allocation on non-PAT SBA machines
  parisc: perf: wire up sys_perf_counter_open
  parisc: add task_pt_regs macro
  parisc: wire sys_perf_counter_open to sys_ni_syscall
  parisc: inventory.c, fix bloated stack frame
  parisc: processor.c, fix bloated stack frame
  parisc: fix compile warning in mm/init.c
  parisc: remove dead code from sys_parisc32.c
  parisc: wire up rt_tgsigqueueinfo
  parisc: ensure broadcast tlb purge runs single threaded
  parisc: fix "delay!" timer handling
  parisc: fix mismatched parenthesis in memcpy.c
  parisc: Fix gcc 4.4 warning in lba_pci.c
  parisc: add parameter to read_cr16()
  parisc: decode_exc.c should include kernel.h
  parisc: remove obsolete hw_interrupt_type
  parisc: fix irq compile bugs in arch/parisc/kernel/irq.c
  parisc: advertise PCI devs after "assign_resources"
  ...

Manually fixed up trivial conflicts in tools/perf/perf.h due to addition
of SH vs HPPA perf-counter support.
2009-07-04 10:35:12 -07:00
Ingo Molnar 029e5b1636 perf report: Annotate variable initialization
Certain versions of GCC dont see the initialization that is done here:

  builtin-report.c: In function ‘__cmd_report’:
  builtin-report.c:1038: warning: ‘syms’ may be used uninitialized in this function

So annotate it with a NULL initialization.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-03 13:17:28 +02:00
Arnaldo Carvalho de Melo 30d7a77dd5 perf_counter tools: Adjust symbols in ET_EXEC files too
Ingo Molnar wrote:

> i just bisected a 'perf report' bug that would cause us to not
> resolve all user-space symbols in a 'git gc' run to:
>
> f5812a7a33 is first bad commit
> commit f5812a7a33
> Author: Arnaldo Carvalho de Melo <acme@redhat.com>
> Date:   Tue Jun 30 11:43:17 2009 -0300
>
>     perf_counter tools: Adjust only prelinked symbol's addresses

Rename ->prelinked to ->adjust_symbols and making what was done
only for prelinked libraries also to ET_EXEC binaries, such as
/usr/bin/git:

[acme@doppio pahole]$ readelf -h /usr/bin/git | grep Type
  Type:                              EXEC (Executable file)
[acme@doppio pahole]$

And after installing the 'git-debuginfo' package, I get correct results:

[acme@doppio linux-2.6-tip]$ perf report --sort comm,dso,symbol -d /usr/bin/git | head -20

 #
 # (1139614 samples)
 #
 # Overhead           Command  Shared Object              Symbol
 # ........  ................  .........................  ......
 #
    34.98%               git  /usr/bin/git               [.] send_sideband
    33.39%               git  /usr/bin/git               [.] enter_repo
     6.81%               git  /usr/bin/git               [.] diff_opt_parse
     4.95%               git  /usr/bin/git               [.] is_repository_shallow
     3.24%               git  /usr/bin/git               [.] odb_mkstemp
     1.39%               git  /usr/bin/git               [.] output
     1.34%               git  /usr/bin/git               [.] xmmap
     1.25%               git  /usr/bin/git               [.] receive_pack_config
     1.16%               git  /usr/bin/git               [.] git_pathdup
     0.90%               git  /usr/bin/git               [.] read_object_with_reference
     0.86%               git  /usr/bin/git               [.] show_patch_diff
     0.85%               git  /usr/bin/git               0x00000000095e2e
     0.69%               git  /usr/bin/git               [.] display
[acme@doppio linux-2.6-tip]$

I'll check what are the last cases where we can't resolve symbols, like
this 0x00000000095e2e later.

And I guess this will fix the problems Mike were seeing too:

 [acme@doppio linux-2.6-tip]$ readelf -h ../build/perf/vmlinux | grep Type
   Type:                              EXEC (Executable file)
 [acme@doppio linux-2.6-tip]$

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-03 08:24:13 +02:00
Kyle McMartin 2d4618dce6 parisc: perf: wire up sys_perf_counter_open
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-07-03 03:34:12 +00:00
Frederic Weisbecker 24b57c6988 perf_counter tools: Display percents of hits in callchain with overhead colors
This adds the use of colors to signal at a glance the important
overhead thresholds in callchains hit rates.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246558475-10624-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 21:38:38 +02:00
Frederic Weisbecker 1e11fd82d2 perf_counter tools: Provide helper to print percents color
Among perf annotate, perf report and perf top, we can find the
common colored printing of percents according to the following
rules:

    High overhead =  > 5%, colored in red
    Mid overhead =  > 0.5%, colored in green
    Low overhead =  < 0.5%, default color

Factorize these multiple checks in a single function named
percent_color_fprintf() and also provide a get_percent_color()
for sites which print percentages and other things at the same
time.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246558475-10624-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 21:38:37 +02:00
Frederic Weisbecker c20ab37ef3 perf_counter tools: Set the minimum percent for callchains to be displayed
Callchains output may become a burden on a trace because even
rarely hit site are exposed. This can be too much information.

Let the user set a threshold as a minimum percent of hits using
the new pattern for the -c option:

    -c mode,min_percent

Example:

$ perf report -s sym -c flat,4

     8.25%  [k] copy_user_generic_string
             4.19%
                copy_user_generic_string
                generic_file_aio_read
                do_sync_read
                vfs_read
                sys_pread64
                system_call_fastpath
                pread64

     5.39%  [k] search_by_key
     4.63%  0x00000000009e0a
     2.36%  [k] memcpy_c
[...]

$ perf report -s sym -c graph,2

     8.25%  [k] copy_user_generic_string
                |
                |--4.31%-- generic_file_aio_read
                |          do_sync_read
                |          vfs_read
                |          |
                |           --4.19%-- sys_pread64
                |                     system_call_fastpath
                |                     pread64
                |
                 --3.24%-- generic_file_buffered_write
                           __generic_file_aio_write_nolock
                           generic_file_aio_write
                           do_sync_write
                           reiserfs_file_write
                           vfs_write
                           |
                            --3.14%-- sys_pwrite64
                                      system_call_fastpath
                                      __pwrite64

     5.39%  [k] search_by_key
                |
                 --2.23%-- reiserfs_update_sd_size

     4.63%  0x00000000009e0a

     2.36%  [k] memcpy_c
[...]

You can also omit it and it will default to 0.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246558475-10624-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 21:38:37 +02:00
Frederic Weisbecker 4eb3e4788b perf report: Add support for callchain graph output
Currently, the printing of callchains is done in a single
vertical level, this is the "flat" mode:

8.25%  [k] copy_user_generic_string
             4.19%
                copy_user_generic_string
                generic_file_aio_read
                do_sync_read
                vfs_read
                sys_pread64
                system_call_fastpath
                pread64

This patch introduces a new "graph" mode which provides a
hierarchical output of factorized paths recursively sorted:

 8.25%  [k] copy_user_generic_string
                |
                |--4.31%-- generic_file_aio_read
                |          do_sync_read
                |          vfs_read
                |          |
                |          |--4.19%-- sys_pread64
                |          |          system_call_fastpath
                |          |          pread64
                |          |
                |           --0.12%-- sys_read
                |                     system_call_fastpath
                |                     __read
                |
                |--3.24%-- generic_file_buffered_write
                |          __generic_file_aio_write_nolock
                |          generic_file_aio_write
                |          do_sync_write
                |          reiserfs_file_write
                |          vfs_write
                |          |
                |          |--3.14%-- sys_pwrite64
                |          |          system_call_fastpath
                |          |          __pwrite64
                |          |
                |           --0.10%-- sys_write
[...]

The command line has then changed.

By providing the -c option, the callchain will output in the
flat mode by default.

But you can override it:

    perf report -c graph

or

    perf report -c flat

You can also pass the abreviated mode:

    perf report -c g

or

    perf report -c gra

will both make use of the graph mode.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246550301-8954-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 20:47:15 +02:00
Frederic Weisbecker 5a4b181721 perf_counter tools: Add new OPT_CALLBACK_DEFAULT option
There is no predefined macro to create an option that can have
a custom value or a default one if none is given.

This patch provides a new helper OPT_CALLBACK_DEFAULT() which
defines such kind of option.

For example, considering an option -c, we want to get the
default value in the following cases:

    perf command -c -d
    perf command -d -c

And the foo value when it's given:

    perf command -c foo -d
    perf command -d -c foo

That's also why PARSE_OPT_LASTARG_DEFAULT is extended here to
support default values whatever the position of the option, not
only in the end.

Should it now be renamed to PARSE_OPT_ARG_DEFAULT ?

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: git@vger.kernel.org
LKML-Reference: <1246550301-8954-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 20:47:14 +02:00
Frederic Weisbecker 14f4654cbd perf_counter tools: Create new chain_for_each_child() iterator
Iterating through children of a node in the callchain tree
shows something that may be quite confusing at a first glance.
The head is the children field of the parent and the list nodes
are in the brothers field of the children.

This is because the childs are linked to the parent as a list
of "brothers" using the "children" list of the parent as a
head:

  ---------------
 | Parent (head) |-------------------------------------
  ---------------                                      |
     |                                                 |
  children                                             |
     |                                                 |
  -----------               -----------                |
 | 1st child |---brother---| 2nd child |---brother-----
  -----------               -----------

This makes the following strange pattern often occuring:

 list_for_each_entry(child, &parent->children, brothers) {
        // do something with children
 }

Abstract it to chain_for_each_child() to factorize and simplify
this pattern.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246550301-8954-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 20:47:14 +02:00
Mike Galbraith 429764873c perf_counter tools: Enable kernel module symbol loading in tools
Add the -m/--modules option to perf report and perf annotate,
which enables live module symbol/image loading. To be used
with -k/--vmlinux.

(Also give perf annotate a -P/--full-paths option.)

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246514986.13293.48.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 08:42:21 +02:00
Mike Galbraith 6cfcc53ed4 perf_counter tools: Connect module support infrastructure to symbol loading infrastructure
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246514916.13293.46.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 08:42:21 +02:00
Mike Galbraith 208b4b4a59 perf_counter tools: Add infrastructure to support loading of kernel module symbols
Add infrastructure for module path discovery and section load addresses.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246514830.13293.44.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 08:42:20 +02:00
Mike Galbraith 9974f49678 perf_counter tools: Make symbol loading consistently return number of loaded symbols
perf_counter tools: Make symbol loading consistently return number of loaded symbols.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246514758.13293.42.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-02 08:42:20 +02:00
Frederic Weisbecker a92bef0f21 perf stat: Handle pipe read failures in perf stat
Building builtin-stat.c reports the following errors:

cc1: warnings being treated as errors
builtin-stat.c: In function ‘run_perf_stat’:
builtin-stat.c:242: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result
builtin-stat.c:255: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result
make: *** [builtin-stat.o] Erreur 1

This patch handles the possible pipe read failures.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246474930-6088-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 22:37:24 +02:00
Arnaldo Carvalho de Melo 5da5025858 perf_counter tools: Share list.h with the kernel
The copy we were using came from another copy I did for the dwarves
(pahole) package, that came from the kernel years ago.

The only function that is used by the perf tools and that isn't in the
kernel is list_del_range, that I'm leaving in the perf tools only for
now.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090701174608.GA5823@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 22:37:23 +02:00
Arnaldo Carvalho de Melo 43cbcd8acb perf_counter tools: Share rbtree.with the kernel
The tools/perf/util/rbtree.c copy already drifted by three
csets:

 4b324126e0
 4c60117811
 16c047add3

So remove the copy and use the lib/rbtree.c directly, sharing
the source code while still generating a separate object file,
since tools/perf uses a far more agressive -O6 switch.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090701152837.GG15682@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 22:37:22 +02:00
Linus Torvalds 5a475ce469 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: LCDC dcache flush for deferred io
  sh: Fix compiler error and include the definition of IS_ERR_VALUE
  sh: re-add LCDC fbdev support to the Migo-R defconfig
  sh: fix se7724 ceu names
  sh: ms7724se: Enable sh_eth in defconfig.
  arch/sh/boards/mach-se/7206/io.c: Remove unnecessary semicolons
  sh: ms7724se: Add sh_eth support
  nommu: provide follow_pfn().
  sh: Kill off unused DEBUG_BOOTMEM symbol.
  perf_counter tools: add cpu_relax()/rmb() definitions for sh.
  sh64: Hook up page fault events for software perf counters.
  sh: Hook up page fault events for software perf counters.
  sh: make set_perf_counter_pending() static inline.
  clocksource: sh_tmu: Make undefined TCOR behaviour less undefined.
2009-07-01 11:46:30 -07:00
Jaswinder Singh Rajput 73c24cb86c perf list: Add cache events
After:

$ ./perf list

List of pre-defined events (to be used in -e):

  cpu-cycles OR cycles                     [Hardware event]
  instructions                             [Hardware event]
  cache-references                         [Hardware event]
  cache-misses                             [Hardware event]
  branch-instructions OR branches          [Hardware event]
  branch-misses                            [Hardware event]
  bus-cycles                               [Hardware event]

  cpu-clock                                [Software event]
  task-clock                               [Software event]
  page-faults OR faults                    [Software event]
  minor-faults                             [Software event]
  major-faults                             [Software event]
  context-switches OR cs                   [Software event]
  cpu-migrations OR migrations             [Software event]

  L1-d$-loads                              [Hardware cache event]
  L1-d$-load-misses                        [Hardware cache event]
  L1-d$-stores                             [Hardware cache event]
  L1-d$-store-misses                       [Hardware cache event]
  L1-d$-prefetches                         [Hardware cache event]
  L1-d$-prefetch-misses                    [Hardware cache event]
  L1-i$-loads                              [Hardware cache event]
  L1-i$-load-misses                        [Hardware cache event]
  L1-i$-prefetches                         [Hardware cache event]
  L1-i$-prefetch-misses                    [Hardware cache event]
  LLC-loads                                [Hardware cache event]
  LLC-load-misses                          [Hardware cache event]
  LLC-stores                               [Hardware cache event]
  LLC-store-misses                         [Hardware cache event]
  LLC-prefetches                           [Hardware cache event]
  LLC-prefetch-misses                      [Hardware cache event]
  dTLB-loads                               [Hardware cache event]
  dTLB-load-misses                         [Hardware cache event]
  dTLB-stores                              [Hardware cache event]
  dTLB-store-misses                        [Hardware cache event]
  dTLB-prefetches                          [Hardware cache event]
  dTLB-prefetch-misses                     [Hardware cache event]
  iTLB-loads                               [Hardware cache event]
  iTLB-load-misses                         [Hardware cache event]
  branch-loads                             [Hardware cache event]
  branch-load-misses                       [Hardware cache event]

  rNNN                                     [raw hardware event descriptor]

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1246453578.3072.1.camel@ht.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 15:25:03 +02:00
Jaswinder Singh Rajput b9ebdcc0ce perf stat: Define MATCH_EVENT for easy attr checking
MATCH_EVENT is useful:

 1. for multiple attrs checking
 2. avoid repetition of PERF_TYPE_ and PERF_COUNT_ and save space
 3. avoids line breakage

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1246440909.3403.5.camel@hpdv5.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 13:28:38 +02:00
Ingo Molnar f37a291c52 perf_counter tools: Add more warnings and fix/annotate them
Enable -Wextra. This found a few real bugs plus a number
of signed/unsigned type mismatches/uncleanlinesses. It
also required a few annotations

All things considered it was still worth it so lets try with
this enabled for now.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 12:49:48 +02:00
Ingo Molnar 88a69dfbc6 perf report: Fix HV bit mismerge
Fix:

 builtin-report.c: In function ‘hist_entry__add’:
 builtin-report.c:1015: error: case label not within a switch statement
 builtin-report.c:1017: error: break statement not within loop or switch

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 11:17:40 +02:00
Paul Mackerras 61c45981dd perf_counter tools: Rework event string parsing/syntax
This reworks the parser for event descriptors to make it more
consistent in what it accepts.  It is now structured as a
recursive descent parser for the following grammar:

events		::= event ( ("," | space) space* event )*
event		::= ( raw_event | numeric_event | symbolic_event |
		      generic_hw_event ) [ event_modifier ]
raw_event	::= "r" hex_number
numeric_event	::= number ":" number
number		::= decimal_number | "0x" hex_number | "0" octal_number
symbolic_event	::= string_from_event_symbols_array
generic_hw_event::= cache_type ( "-" ( cache_op | cache_result ) )*
event_modifier	::= ":" ( "u" | "k" | "h" )+

with the extra restriction that you can have at most one
cache_op and at most one cache_result.

We pass the current string pointer by reference (i.e. as a
const char **) to the various parsing functions so that they
can advance the pointer to indicate how much they consumed.
They return 0 if they didn't recognize the thing at the pointer
or 1 if they did (and advance the pointer past it).

This also fixes parse_aliases to take the longest matching
alias from the table, not the first one.  Otherwise "l1-data"
would match the "l1-d" alias and the "ata" would not be
consumed.

This allows event modifiers indicating what processor modes to
count in to be applied to any event, not just numeric events,
and adds a ":h" modifier to indicate counting in hypervisor
mode.  Specifying ":u" now sets both exclude_kernel and
exclude_hv, and so on.  Multiple modes can be specified, e.g.
":uk" will count in user or hypervisor mode (i.e. only
exclude_kernel will be set).

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <19018.53826.843815.189847@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 10:23:17 +02:00
Frederic Weisbecker deac911cbd perf_counter tools: Various fixes for callchains
The symbol resolving has of course revealed some bugs in the
callchain tree handling. This patch fixes some of them,
including:

- inherit the children from the parents while splitting a node
- fix list range moving
- fix indexes setting in callchains
- create a child on the current node if the path doesn't match in
  the existent children (was only done on the root)
- compare using symbols when possible so that we can match a function
  using any ip inside by referring to its start address.

The practical effects are:

- remove double callchains
- fix upside down or any random order of callchains
- fix wrong paths
- fix bad hits and percentage accounts

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246419315-9968-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 09:58:52 +02:00
Frederic Weisbecker 4424961ad6 perf_counter tools: Resolve symbols in callchains
This patch resolves the names, when possible, of each ip
present in the callchains while using the -c option with perf
report.

Example:

5.40%  [k] __d_lookup
             5.37%
                perf_callchain
                perf_counter_overflow
                intel_pmu_handle_irq
                perf_counter_nmi_handler
                notifier_call_chain
                atomic_notifier_call_chain
                notify_die
                do_nmi
                nmi
                do_lookup
                __link_path_walk
                path_walk
                do_path_lookup
                user_path_at
                sys_faccessat
                sys_access
                system_call_fastpath
                0x7fb609846f77

             0.01%
                perf_callchain
                perf_counter_overflow
                intel_pmu_handle_irq
                perf_counter_nmi_handler
                notifier_call_chain
                atomic_notifier_call_chain
                notify_die
                do_nmi
                nmi
                do_lookup
                __link_path_walk
                path_walk
                do_path_lookup
                user_path_at
                sys_faccessat

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246419315-9968-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 09:58:26 +02:00
Frederic Weisbecker 9198aa77b6 perf_counter tools: Fix storage size allocation of callchain list
Fix a confusion while giving the size of a callchain list
during its allocation. We are using the wrong structure size.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246419315-9968-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 09:58:23 +02:00
Ingo Molnar 087021ba41 Merge branch 'linus' into perfcounters/urgent
Merge reason: this branch was on a .30-ish base before, update
              it to an almost-.31-rc2 upstream base to pick up fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 09:56:26 +02:00
Linus Torvalds 55bcab4695 Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (47 commits)
  perf report: Add --symbols parameter
  perf report: Add --comms parameter
  perf report: Add --dsos parameter
  perf_counter tools: Adjust only prelinked symbol's addresses
  perf_counter: Provide a way to enable counters on exec
  perf_counter tools: Reduce perf stat measurement overhead/skew
  perf stat: Use percentages for scaling output
  perf_counter, x86: Update x86_pmu after WARN()
  perf stat: Micro-optimize the code: memcpy is only required if no event is selected and !null_run
  perf stat: Improve output
  perf stat: Fix multi-run stats
  perf stat: Add -n/--null option to run without counters
  perf_counter tools: Remove dead code
  perf_counter: Complete counter swap
  perf report: Print sorted callchains per histogram entries
  perf_counter tools: Prepare a small callchain framework
  perf record: Fix unhandled io return value
  perf_counter tools: Add alias for 'l1d' and 'l1i'
  perf-report: Add bare minimum PERF_EVENT_READ parsing
  perf-report: Add modes for inherited stats and no-samples
  ...
2009-06-30 19:02:59 -07:00
Anton Blanchard fb9c818873 perf report: Add hypervisor dso
Add a dso for hypervisor samples. We don't get any symbol
information on the ppc64 hypervisor but this at least gives
us a high level summary of the time spent in there.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230141.182536873@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 01:25:20 +02:00
Anton Blanchard d8db1b57d3 perf report: Fix reporting of hypervisor
PERF_EVENT_MISC_* is not a bitmask, so we have to mask and compare.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230141.088394681@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 01:25:20 +02:00
Anton Blanchard 3a3393ef75 perf top: Add ppc64 specific skip symbols and strip ppc64 . prefix
Filter out some ppc64 specific idle loop functions and remove
leading '.' on ppc64 text symbols.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230140.995643441@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 01:25:19 +02:00
Anton Blanchard 2ab52083ff perf top: Move skip symbols to an array
Move the list of symbols we skip into an array, making it
easier to add new ones.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230140.904782938@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 01:25:19 +02:00
Anton Blanchard 6717534ddc perf_counter tools: Remove zlib dependency
The zlib devel libraries may not be installed and since we aren't
using zlib we may as well remove it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230140.802078956@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 01:25:18 +02:00
Anton Blanchard 1f208ea678 perf report: Fix -z option
Fix a copy and paste error, -z was setting the group option.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230140.714204656@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 01:25:18 +02:00
Arnaldo Carvalho de Melo 7bec7a9134 perf report: Add --symbols parameter
So that we can filter by symbol name.

The 'pfunct' utility in the 'dwarves' package can be used to
create a file with the functions one wants.

Example:

[acme@doppio pahole]$ pfunct /usr/lib/debug/usr/lib64/libdw-0.141.so.debug | grep dwarf > /tmp/dwarf.symbols
[acme@doppio pahole]$ wc -l /tmp/dwarf.symbols
93 /tmp/dwarf.symbols
[acme@doppio pahole]$ head -3 /tmp/dwarf.symbols
dwfl_addrdwarf
dwfl_module_getdwarf
dwfl_getdwarf
[acme@doppio pahole]$ perf report --sort comm,dso,symbol --comms pahole --dsos /usr/lib64/libdw-0.141.so --symbols file:///tmp/dwarf.symbols

    33.99%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_tag
    29.07%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_decl_file
    27.71%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_getsrclines
     4.54%            pahole  /usr/lib64/libdw-0.141.so  0x00000000007400
     3.93%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_decl_line
     0.46%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_getlocation
     0.18%            pahole  /usr/lib64/libdw-0.141.so  [.] __libdwarf_next_prime
     0.13%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_diecu

[acme@doppio pahole]$

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-4-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 00:07:10 +02:00
Arnaldo Carvalho de Melo cc8b88b15a perf report: Add --comms parameter
So that we can filter by comm. Symbols in other comms won't be
accounted for.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-3-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 00:07:10 +02:00
Arnaldo Carvalho de Melo 25903407da perf report: Add --dsos parameter
So that we can filter by dso. Symbols in other dsos won't be
accounted for.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-2-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 00:07:09 +02:00
Arnaldo Carvalho de Melo f5812a7a33 perf_counter tools: Adjust only prelinked symbol's addresses
I.e. we can't handle these two kinds of files in the same way:

1) prelinked system library:

[acme@doppio pahole]$ readelf -s /usr/lib64/libdw-0.141.so | egrep 'FUNC.+GLOBAL.+dwfl_report_elf'
   278: 00000030450105a0   261 FUNC    GLOBAL DEFAULT   12 dwfl_report_elf@@ELFUTILS_0.122

2) not prelinked library with debug information from a -debuginfo package:

[acme@doppio pahole]$ readelf -s /usr/lib/debug/usr/lib64/libdw-0.141.so.debug | egrep 'FUNC.+GLOBAL.+dwfl_report_elf'
   629: 00000000000105a0   261 FUNC    GLOBAL DEFAULT   12 dwfl_report_elf
[acme@doppio pahole]$

Now the numbers I got for a pahole perf run are in line with
the numbers I get from oprofile.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090630144317.GB12663@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-30 17:09:30 +02:00
Paul Mackerras 57e7986ed1 perf_counter: Provide a way to enable counters on exec
This provides a way to mark a counter to be enabled on the next
exec. This is useful for measuring the total activity of a
program without including overhead from the process that
launches it.

This also changes the perf stat command to use this new
facility.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <19017.43927.838745.689203@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-30 12:00:16 +02:00
Paul Mackerras 051ae7f734 perf_counter tools: Reduce perf stat measurement overhead/skew
Vince Weaver reported a 'perf stat' measurement overhead in the
count of retired instructions, which can amount to a +6000
instructions inflated count in the reported count.

At present, perf stat creates its counters on the perf process.  Thus
the counters count the fork and various other activity in both the
parent and child, such as the resolver overhead for resolving PLT
entries for any libc functions that haven't been called before, such
as execvp.

This reduces the overhead by creating the counters on the child process
after the fork, using a couple of pipes to synchronize so that the
child process waits until the parent has created the counters before
doing the exec.  To eliminate the PLT resolution overhead on calling
execvp, this does a dummy execvp first which will always fail.

With this, the overhead of executing a program goes down from over
4800 instructions to about 90 instructions on powerpc (32-bit).
This was measured with a statically-linked program written in
assembler which only does the 3 instructions needed to call _exit(0).

Before:

$ perf stat -e 0:1:u ./three

 Performance counter stats for './three':

           4858  instructions

    0.001274523  seconds time elapsed

After:

$ perf stat -e 0:1:u ./three

 Performance counter stats for './three':

             92  instructions

    0.000468153  seconds time elapsed

Reported-by: Vince Weaver <vince@deater.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 22:38:09 +02:00
Ingo Molnar 210ad39fb7 perf stat: Use percentages for scaling output
Peter expressed a strong preference for percentage based
display of scaled values - so revert to that from the
recently introduced multiplication-factor unit.

Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 21:50:54 +02:00
Jaswinder Singh Rajput c3043569dc perf stat: Micro-optimize the code: memcpy is only required if no event is selected and !null_run
Set attrs and nr_counters if no event is selected and !null_run.

Setting of attrs should depend on number of counters,
so we need to memcpy only for sizeof(default_attrs)

Also set nr_counters as ARRAY_SIZE(default_attrs) in place of
hardcoded value.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1246126749.32198.16.camel@hpdv5.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-28 15:22:47 +02:00
Jaswinder Singh Rajput 6e750a8fc0 perf stat: Improve output
Increase size for event name to handle bigger names like
'L1-d$-prefetch-misses'

Changed scaled counters from percentage to a multiplicative
factor because the latter is more expressive.

Also aligned the scaling factor, otherwise sometimes it looks
like:

            384  iTLB-load-misses           (4.74x scaled)
         452029  branch-loads               (8.00x scaled)
           5892  branch-load-misses         (20.39x scaled)
         972315  iTLB-loads                 (3.24x scaled)

Before:
         150708  L1-d$-stores          (scaled from 23.57%)
         428804  L1-d$-prefetches      (scaled from 23.47%)
         314446  L1-d$-prefetch-misses  (scaled from 23.42%)
      252626137  L1-i$-loads           (scaled from 23.24%)
        5297550  dTLB-load-misses      (scaled from 23.96%)
      106992392  branch-loads          (scaled from 23.67%)
        5239561  branch-load-misses    (scaled from 23.43%)

After:
        1731713  L1-d$-loads               (  14.25x scaled)
          44241  L1-d$-prefetches          (   3.88x scaled)
          21076  L1-d$-prefetch-misses     (   3.40x scaled)
        5789421  L1-i$-loads               (   3.78x scaled)
          29645  dTLB-load-misses          (   2.95x scaled)
         461474  branch-loads              (   6.52x scaled)
           7493  branch-load-misses        (  26.57x scaled)

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1246051927.2988.10.camel@hpdv5.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-27 18:39:41 +02:00
Ingo Molnar 566747e629 perf stat: Fix multi-run stats
In multi-run (-r/--repeat) printouts, print out the noise of
the wall-clock average as well.

Also, fix a bug in printing out scaled counters: if it was not
scaled then we should not update the average with -1.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-27 06:34:37 +02:00
Ingo Molnar 0cfb7a13b8 perf stat: Add -n/--null option to run without counters
Allow a no-counters run. This can be useful to measure just
elapsed wall-clock time - or to assess the raw overhead of perf
stat itself, without running any counters.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-27 06:11:24 +02:00
Ingo Molnar fde953c1c6 perf_counter tools: Remove dead code
Vince Weaver reported that there's a handful of #ifdef __MINGW32__
sections in the code.

Remove them as they are in essence dead code - as unlike upstream
Git, the perf tool is unlikely to be ported to Windows.

Reported-by: Vince Weaver <vince@deater.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-27 06:06:39 +02:00
Frederic Weisbecker f55c555226 perf report: Print sorted callchains per histogram entries
Use the newly created callchains radix tree to gather the chains stats
from the recorded events and then print the callchains for all of them,
sorted by hits, using the "-c" parameter with perf report.

Example:

 66.15%  [k] atm_clip_exit
            63.08%
                0xffffffffffffff80
                0xffffffff810196a8
                0xffffffff810c14c8
                0xffffffff8101a79c
                0xffffffff810194f3
                0xffffffff8106ab7f
                0xffffffff8106abe5
                0xffffffff8106acde
                0xffffffff8100d94b
                0xffffffff8153e7ea
                [...]

             1.54%
                0xffffffffffffff80
                0xffffffff810196a8
                0xffffffff810c14c8
                0xffffffff8101a79c
		[...]

Symbols are not yet resolved.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246026481-8314-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-26 16:47:01 +02:00
Frederic Weisbecker 8cb76d99d7 perf_counter tools: Prepare a small callchain framework
We plan to display the callchains depending on some user-configurable
parameters.

To gather the callchains stats from the recorded stream in a fast way,
this patch introduces an ad hoc radix tree adapted for callchains and also
a rbtree to sort these callchains once we have gathered every events
from the stream.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246026481-8314-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-26 16:47:00 +02:00
Frederic Weisbecker 3928ddbe99 perf record: Fix unhandled io return value
Building latest perfcounter fails on the following error:

 builtin-record.c: In function ‘create_counter’:
 builtin-record.c:451: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result
 make: *** [builtin-record.o] Erreur 1

Just check if we successfully read the perf file descriptor.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1245961287-5327-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 22:25:55 +02:00
Jaswinder Singh Rajput 4418351f06 perf_counter tools: Add alias for 'l1d' and 'l1i'
Add 'l1d' and 'l1i' aliases again as shortcuts - just dont make them
the primary display alias.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1245945462.9157.11.camel@hpdv5.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 21:54:53 +02:00
Peter Zijlstra e9ea2fde7a perf-report: Add bare minimum PERF_EVENT_READ parsing
Provide the basic infrastructure to provide per task stats.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 21:39:09 +02:00
Peter Zijlstra 649c48a9e7 perf-report: Add modes for inherited stats and no-samples
Now that we can collect per task statistics, add modes that
make use of that facility.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 21:39:08 +02:00
Peter Zijlstra e6e18ec79b perf_counter: Rework the sample ABI
The PERF_EVENT_READ implementation made me realize we don't
actually need the sample_type int the output sample, since
we already have that in the perf_counter_attr information.

Therefore, remove the PERF_EVENT_MISC_OVERFLOW bit and the
event->type overloading, and imply put counter overflow
samples in a PERF_EVENT_SAMPLE type.

This also fixes the issue that event->type was only 32-bit
and sample_type had 64 usable bits.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 21:39:08 +02:00
Peter Zijlstra 7c6a1c65bb perf_counter tools: Rework the file format
Create a structured file format that includes the full
perf_counter_attr and all its relevant counter IDs so that
the reporting program has full information.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 21:39:04 +02:00
Jaswinder Singh Rajput e5c5954779 perf_counter tools: Shorten names for events
Added new alias for events.

On AMD box:

 $ ./perf stat -e l1d -e l1d-misses -e l1d-write -e l1d-prefetch -e l1d-prefetch-miss -e l1i -e l1i-misses -e l1i-prefetch -e l2 -e l2-misses -e l2-write -e dtlb -e dtlb-misses -e itlb -e itlb-misses -e bpu -e bpu-misses -- ls -lR /usr/include/ > /dev/null

Before :

 Performance counter stats for 'ls -lR /usr/include/':

      248064467  L1-data-Cache-Load-Referencees  (scaled from 23.27%)
        1001433  L1-data-Cache-Load-Misses  (scaled from 23.34%)
         153691  L1-data-Cache-Store-Referencees  (scaled from 23.34%)
         423248  L1-data-Cache-Prefetch-Referencees  (scaled from 23.33%)
         302138  L1-data-Cache-Prefetch-Misses  (scaled from 23.25%)
      251217546  L1-instruction-Cache-Load-Referencees  (scaled from 23.25%)
        5757005  L1-instruction-Cache-Load-Misses  (scaled from 23.23%)
          93435  L1-instruction-Cache-Prefetch-Referencees  (scaled from 23.24%)
        6496073  L2-Cache-Load-Referencees  (scaled from 23.32%)
         609485  L2-Cache-Load-Misses  (scaled from 23.45%)
        6876991  L2-Cache-Store-Referencees  (scaled from 23.71%)
      248922840  Data-TLB-Cache-Load-Referencees  (scaled from 23.94%)
        5828386  Data-TLB-Cache-Load-Misses  (scaled from 24.17%)
      257613506  Instruction-TLB-Cache-Load-Referencees  (scaled from 24.20%)
           6833  Instruction-TLB-Cache-Load-Misses  (scaled from 23.88%)
      109043606  Branch-Cache-Load-Referencees  (scaled from 23.64%)
        5552296  Branch-Cache-Load-Misses  (scaled from 23.42%)

    0.413702461  seconds time elapsed.

After :

 Peformance counter stats for 'ls -lR /usr/include/':

      266590464  L1-d$-loads           (scaled from 23.03%)
        1222273  L1-d$-load-misses     (scaled from 23.58%)
         146204  L1-d$-stores          (scaled from 23.83%)
         406344  L1-d$-prefetches      (scaled from 24.09%)
         283748  L1-d$-prefetch-misses (scaled from 24.10%)
      249650965  L1-i$-loads           (scaled from 23.80%)
        3353961  L1-i$-load-misses     (scaled from 23.82%)
         104599  L1-i$-prefetches      (scaled from 23.68%)
        4836405  LLC-loads             (scaled from 23.67%)
         498214  LLC-load-misses       (scaled from 23.66%)
        4953994  LLC-stores            (scaled from 23.64%)
      243354097  dTLB-loads            (scaled from 23.77%)
        6468584  dTLB-load-misses      (scaled from 23.74%)
      249719549  iTLB-loads            (scaled from 23.25%)
           5060  iTLB-load-misses      (scaled from 23.00%)
      112343016  branch-loads          (scaled from 22.76%)
        5528876  branch-load-misses    (scaled from 22.54%)

    0.427154051  seconds time elapsed.

Reported-by : Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245934522.5308.39.camel@hpdv5.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 17:30:23 +02:00
Jaswinder Singh Rajput 06813f6c74 perf_counter tools: Check for valid cache operations
Made new table for cache operartion stat 'hw_cache_stat' as:

 L1I : Read and prefetch only
 ITLB and BPU : Read-only

introduce is_cache_op_valid() for cache operation validity

And checks for valid cache operations.

Reported-by : Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245930367.5308.33.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 14:08:49 +02:00
Johannes Weiner 76c64c5e4c perf record: Fix filemap pathname parsing in /proc/pid/maps
Looking backward for the first space from the end of a line in
/proc/pid/maps does not find the start of the pathname of the mapped
file if it contains a space.

Since the only slashes we have in this file occur in the (absolute!)
pathname column of file mappings, looking for the first slash in a
line is a safe method to find the name.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090624190835.GA25548@cmpxchg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 11:35:58 +02:00
Paul Mundt febe834535 perf_counter tools: add cpu_relax()/rmb() definitions for sh.
Simple cpu_relax()/rmb() stubs that perf needs, which were inadvertently
omitted from the sh HAVE_PERF_COUNTERS patch.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-25 14:41:57 +09:00
Ingo Molnar 1b173f77dd perf_counter tools: Add CREDITS file for Git contributors
Much of perf's libraries comes from the Git project. I noticed
that the files (in tools/perf/util/*.[ch] and elsewhere) are
quite spartan wrt. credits, so lets add a CREDITS file that
includes an (incomplete!) list of main contributors.

Thanks guys, these libraries are really useful. Special thanks
go to Johannes Schindelin and Junio C Hamano for coming up with
this list.

List-Composed-By: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-24 19:54:29 +02:00
Jaswinder Singh Rajput 3d63259583 perf stat: Remove dead code
Remove dead code and do some code alignment.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245847774.2681.2.camel@ht.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-24 14:55:45 +02:00
Roel Kluin f7679dabfa perf_counter tools: Fix strbuf_fread() error path handling
size_t res cannot be less than 0 - fread returns 0 on error.

[ Updated by: René Scharfe <rene.scharfe@lsrfire.ath.cx> ]

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Junio C Hamano <gitster@pobox.com>
LKML-Reference: <4A3FB479.2090902@lsrfire.ath.cx>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-24 10:22:06 +02:00
Jaswinder Singh Rajput cca03c0aeb perf stat: Fix verbose for perf stat
Error message should use stderr for verbose (-v), otherwise
message will be lost for:

 $ ./perf stat -v <cmd>  > /dev/null

For example on AMD bus-cycles event is not available so now
it looks like:

 $ ./perf stat -v -e bus-cycles ls > /dev/null
Error: counter 0, sys_perf_counter_open() syscall returned with -1 (Invalid argument)

 Performance counter stats for 'ls':

  <not counted>  bus-cycles

    0.006765877  seconds time elapsed.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245757369.3776.1.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-23 21:58:44 +02:00
Ingo Molnar b0a28589b2 perf report: Fix help text typo
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-23 16:39:53 +02:00
Peter Zijlstra 3d906ef10a perf_counter tools: Handle overlapping MMAP events
Martin Schwidefsky reported "perf report" symbol resolution
problems on S390.

Since we only report MMAP, not MUNMAP, we have to deal with
overlapping maps.

We used to simply throw out the old map on the assumption whole
maps got unmapped. This obviously doesn't deal with partial
unmaps. However it appears some dynamic linkers do fancy
partial unmaps (s390), so do something more elaborate and
truncate the old maps, only removing them when they've been
fully covered.

This resolves (part of) the S390 symbol resolution problems.

Reported-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tested-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-23 11:42:44 +02:00
Jaswinder Singh Rajput dee412066a perf stat: Fix command option / manpage
-l is not supported, it should be -S for scale.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245703959.6167.16.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-23 10:20:02 +02:00
Jaswinder Singh Rajput c0c22dbfa8 perf_counter tools: Set alias for page-faults
"faults" should be alias for "page-faults"

Also fixed alignment and 80 characters issue

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245683846.12092.1.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-22 17:25:53 +02:00
Peter Zijlstra 520f2c346a perf report: Output more symbol related debug data
Print more symbol relocation related info under -vv.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-22 17:02:07 +02:00
Jaswinder Singh Rajput 74d5b5889e perf_counter tools: Introduce alias member in event_symbol
By introducing alias member in event_symbol :

1. duplicate lines are removed, like:
   cpu-cycles and cycles
   branch-instructions and branches
   context-switches and cs
   cpu-migrations and migrations

2. We can also add alias for another events.

Now ./perf list looks like :

List of pre-defined events (to be used in -e):

  cpu-cycles OR cycles                     [Hardware event]
  instructions                             [Hardware event]
  cache-references                         [Hardware event]
  cache-misses                             [Hardware event]
  branch-instructions OR branches          [Hardware event]
  branch-misses                            [Hardware event]
  bus-cycles                               [Hardware event]

  cpu-clock                                [Software event]
  task-clock                               [Software event]
  page-faults                              [Software event]
  faults                                   [Software event]
  minor-faults                             [Software event]
  major-faults                             [Software event]
  context-switches OR cs                   [Software event]
  cpu-migrations OR migrations             [Software event]

  rNNN                                     [raw hardware event descriptor]

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245669268.17153.8.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-22 13:29:58 +02:00
Jaswinder Singh Rajput 51e2684231 perf_counter tools: Define separate declarations for H/W and S/W events
Define separate declarations for H/W and S/W events to:

 1. Shorten name to save some space so that we can add more members
 2. Fix alignment
 3. Avoid declaring HARDWARE/SOFTWARE again and again.

Removed unused CR(x, y)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245669194.17153.6.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-22 13:29:57 +02:00
Martin Schwidefsky 12310e9c1b [S390] Enable tick based perf_counter on s390.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22 12:08:24 +02:00
Ingo Molnar c1f47b454c perf_counter tools: Fix vmlinux fallback when running on a different kernel
Lucas De Marchi reported that perf report and perf annotate
displays mismatching profile if a perf.data is analyzed on
an older kernel - even if the correct vmlinux is specified
via the -k option.

The reason is the fallback path in util/symbol.c:dso__load_kernel():

int dso__load_kernel(struct dso *self, const char *vmlinux,
                     symbol_filter_t filter, int verbose)
{
        int err = -1;

        if (vmlinux)
                err = dso__load_vmlinux(self, vmlinux, filter, verbose);

        if (err)
                err = dso__load_kallsyms(self, filter, verbose);

        return err;
}

dso__load_vmlinux() returns negative on error, but on success it
returns the number of symbols loaded - which confuses the function
to load the kallsyms.

This is normally harmless, as reporting is usually performed on the
same kernel that is analyzed - but if there's a mismatch then we
load the wrong kallsyms and create a non-sensical symbol tree.

The fix is to only fall back to kallsyms on errors.

Reported-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-21 13:58:51 +02:00
Frederic Weisbecker eadc84cc01 perfcounter: Handle some IO return values
Building perfcounter tools raises the following warnings:

 builtin-record.c: In function ‘atexit_header’:
 builtin-record.c:464: erreur: ignoring return value of ‘pwrite’, declared with attribute warn_unused_result
 builtin-record.c: In function ‘__cmd_record’:
 builtin-record.c:503: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result

 builtin-report.c: In function ‘__cmd_report’:
 builtin-report.c:1403: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result

This patch handles these IO return values.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1245456100-5477-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-20 12:30:33 +02:00
Paul Mackerras 9cffa8d533 perf_counter tools: Define and use our own u64, s64 etc. definitions
On 64-bit powerpc, __u64 is defined to be unsigned long rather than
unsigned long long.  This causes compiler warnings every time we
print a __u64 value with %Lx.

Rather than changing __u64, we define our own u64 to be unsigned long
long on all architectures, and similarly s64 as signed long long.
For consistency we also define u32, s32, u16, s16, u8 and s8.  These
definitions are put in a new header, types.h, because these definitions
are needed in util/string.h and util/symbol.h.

The main change here is the mechanical change of __[us]{64,32,16,8}
to remove the "__".  The other changes are:

* Create types.h
* Include types.h in perf.h, util/string.h and util/symbol.h
* Add types.h to the LIB_H definition in Makefile
* Added (u64) casts in process_overflow_event() and print_sym_table()
  to kill two remaining warnings.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: benh@kernel.crashing.org
LKML-Reference: <19003.33494.495844.956580@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19 18:25:47 +02:00
Peter Zijlstra f5970550d5 perf_counter tools: Add a data file header
Add a data file header so we can transfer data between record and report.

LKML-Reference: <new-submission>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19 13:42:36 +02:00
Peter Zijlstra 2a0a50fe9d perf_counter: Update userspace callchain sampling uses
Update the tools to reflect the new callchain sampling format.

LKML-Reference: <new-submission>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19 13:42:35 +02:00
Ingo Molnar b8e6d82972 perf report: Filter to parent set by default
Make it easier to use parent filtering - default to a filtered
output. Also add the parent column so that we get collapsing but
dont display it by default.

add --no-exclude-other to override this.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18 14:32:19 +02:00
Peter Zijlstra 9d91a6f7a4 perf_counter tools: Handle lost events
Make use of the new ->data_tail mechanism to tell kernel-space
about user-space draining the data stream. Emit lost events
(and display them) if they happen.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18 14:46:11 +02:00
Paul Mackerras e24a72c4d8 perf_counter: tools: Makefile tweaks for 64-bit powerpc
On 64-bit powerpc, perf needs to be built as a 64-bit executable.
This arranges to add the -m64 flag to CFLAGS if we are running on
a 64-bit machine, indicated by the result of uname -m ending in "64".
This means that we'll use -m64 on x86_64 machines as well.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linuxppc-dev@ozlabs.org
Cc: benh@kernel.crashing.org
LKML-Reference: <19000.55666.866148.559620@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18 11:11:47 +02:00
Peter Zijlstra a73c7d84a1 perf_counter tools: Add and use isprint()
Introduce isprint() to print out raw event dumps to ASCII, etc.

(This is an extension to upstream Git's ctype.c.)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
[ removed openssl.h inclusion from util.h - it leaked ctype.h ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18 09:46:00 +02:00
Ingo Molnar 7522060c95 perf report: Add validation of call-chain entries
Add boundary checks for call-chain events. In case of corrupted
entries we could crash otherwise.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18 08:15:47 +02:00
Ingo Molnar b25bcf2f13 perf report: Tidy up the "--parent <regex>" and "--sort parent" call-chain features
Instead of the ambigious 'call' naming use the much more
specific 'parent' naming:

 - rename --call <regex> to --parent <regex>

 - rename --sort call to --sort parent

 - rename [unmatched] to [other] - to signal that this is not
   an error but the inverse set

Also add pagefaults to the default parent-symbol pattern too,
as it's a 'syscall overhead category' in a sense.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18 07:21:54 +02:00
Peter Zijlstra 5aa75a0fd4 perf_counter tools: Replace isprint() with issane()
The Git utils came with a ctype replacement that doesn't provide
isprint(). Add a replacement.

Solves a build bug on certain distros.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:23:53 +02:00
Peter Zijlstra 6e7d6fdcbe perf report: Add --sort <call> --call <$regex>
Implement sorting by callchain symbols, --sort <call>.

It will create a new column which will show a match to
--call $regex or "[unmatched]".

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:23:52 +02:00
Ingo Molnar e2eae0f560 perf report: Fix 32-bit printf format
Yong Wang reported the following compiler warning:

 builtin-report.c: In function 'process_overflow_event':
 builtin-report.c:984: error: cast to pointer from integer of different size

Which happens because we try to print ->ips[] out with a limited
format, losing the high 32 bits. Print it out using %016Lx instead.

Reported-by: Yong Wang <yong.y.wang@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-15 16:18:02 +02:00
Ingo Molnar 3dfabc74c6 perf report: Add per system call overhead histogram
Take advantage of call-graph percounter sampling/recording to
display a non-trivial histogram: the true, collapsed/summarized
cost measurement, on a per system call total overhead basis:

 aldebaran:~/linux/linux/tools/perf> ./perf record -g -a -f ~/hackbench 10
 aldebaran:~/linux/linux/tools/perf> ./perf report -s symbol --syscalls | head -10
 #
 # (3536 samples)
 #
 # Overhead  Symbol
 # ........  ......
 #
     40.75%  [k] sys_write
     40.21%  [k] sys_read
      4.44%  [k] do_nmi
 ...

This is done by accounting each (reliable) call-chain that chains back
to a given system call to that system call function.

[ So in the above example we can see that hackbench spends about 40% of
  its total time somewhere in sys_write() and 40% somewhere in
  sys_read(), the rest of the time is spent in user-space. The time
  is not spent in sys_write() _itself_ but in one of its many child
  functions. ]

Or, a recording of a (source files are already in the page-cache) kernel build:

 $ perf record -g -m 512 -f -- make -j32 kernel
 $ perf report -s s --syscalls | grep '\[k\]' | grep -v nmi

     4.14%  [k] do_page_fault
     1.20%  [k] sys_write
     1.10%  [k] sys_open
     0.63%  [k] sys_exit_group
     0.48%  [k] smp_apic_timer_interrupt
     0.37%  [k] sys_read
     0.37%  [k] sys_execve
     0.20%  [k] sys_mmap
     0.18%  [k] sys_close
     0.14%  [k] sys_munmap
     0.13%  [k] sys_poll
     0.09%  [k] sys_newstat
     0.07%  [k] sys_clone
     0.06%  [k] sys_newfstat
     0.05%  [k] sys_access
     0.05%  [k] schedule

Shows the true total cost of each syscall variant that gets used
during a kernel build. This profile reveals it that pagefaults are
the costliest, followed by read()/write().

An interesting detail: timer interrupts cost 0.5% - or 0.5 seconds
per 100 seconds of kernel build-time. (this was done with HZ=1000)

The summary is done in 'perf report', i.e. in the post-processing
stage - so once we have a good call-graph recording, this type of
non-trivial high-level analysis becomes possible.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-15 15:58:03 +02:00
Ingo Molnar 613d860229 perf record: Fix fast task-exit race
Recording with -a (or with -p) can race with tasks going away:

   couldn't open /proc/8440/maps

Causing an early exit() and no recording done.

Do not abort the recording session - instead just skip that task.

Also, only print the warnings under -v.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-15 09:08:31 +02:00
Ingo Molnar 3efa1cc99e perf record/report: Add call graph / call chain profiling
Add the first steps of call-graph profiling:

 - add the -c (--call-graph) option to perf record
 - parse the call-graph record and printout out under -D (--dump-trace)

The call-graph data is not put into the histogram yet, but it
can be seen that it's being processed correctly:

0x3ce0 [0x38]: event: 35
.
. ... raw event: size 56 bytes
.  0000:  23 00 00 00 05 00 38 00 d4 df 0e 81 ff ff ff ff  #.....8........
.  0010:  60 0b 00 00 60 0b 00 00 03 00 00 00 01 00 02 00  `...`..........
.  0020:  d4 df 0e 81 ff ff ff ff a0 61 ed 41 36 00 00 00  .........a.A6..
.  0030:  04 92 e6 41 36 00 00 00                          .a.A6..
.
0x3ce0 [0x38]: PERF_EVENT (IP, 5): 2912: 0xffffffff810edfd4 period: 1
... chain: u:2, k:1, nr:3
.....  0: 0xffffffff810edfd4
.....  1: 0x3641ed61a0
.....  2: 0x3641e69204
 ... thread: perf:2912
 ...... dso: [kernel]

This shows a 3-entry call-graph: with 1 kernel-space and two user-space
entries

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-14 20:34:06 +02:00
Ingo Molnar 8465b05046 perf report: Print out raw events in hexa
Print out events in hexa dump format, when -D is specified:

0x4868 [0x48]: event: 1
.
. ... raw event: size 72 bytes
.  0000:  01 00 00 00 00 00 48 00 d4 72 00 00 d4 72 00 00  ......H..r...r.
.  0010:  00 00 40 f2 3e 00 00 00 00 30 01 00 00 00 00 00  ..@.>....0.....
.  0020:  00 00 00 00 00 00 00 00 2f 75 73 72 2f 6c 69 62  ......../usr/li
.  0030:  36 34 2f 6c 69 62 65 6c 66 2d 30 2e 31 34 31 2e  64/libelf-0.141
.  0040:  73 6f 00 00 00 00 00 00                          f-0.141
.
0x4868 [0x48]: PERF_EVENT_MMAP 29396: [0x3ef2400000(0x13000) @ (nil)]: /usr/lib64/libelf-0.141.so

This helps the debugging of mis-parsing of data files, and helps
the addition of new sample/trace formats.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-14 14:45:12 +02:00
Frederic Weisbecker c17c2db1f3 perf annotate: Fixes for filename:line displays
- fix addr2line on userspace binary: don't only check kernel image.
- fix string allocation size for path: missing ending null char room
- fix overflow in symbol extra info

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1244907563-7820-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 17:51:00 +02:00
Ingo Molnar ef281a196d perf stat: Enable raw data to be printed
If -vv (very verbose) is specified, print out raw data
in the following format:

$ perf stat -vv -r 3 ./loop_1b_instructions

[ perf stat: executing run #1 ... ]
[ perf stat: executing run #2 ... ]
[ perf stat: executing run #3 ... ]

debug:              runtime[0]: 235871872
debug:             walltime[0]: 236646752
debug:       runtime_cycles[0]: 755150182
debug:            counter/0[0]: 235871872
debug:            counter/1[0]: 235871872
debug:            counter/2[0]: 235871872
debug:               scaled[0]: 0
debug:            counter/0[1]: 2
debug:            counter/1[1]: 235870662
debug:            counter/2[1]: 235870662
debug:               scaled[1]: 0
debug:            counter/0[2]: 1
debug:            counter/1[2]: 235870437
debug:            counter/2[2]: 235870437
debug:               scaled[2]: 0
debug:            counter/0[3]: 140
debug:            counter/1[3]: 235870298
debug:            counter/2[3]: 235870298
debug:               scaled[3]: 0
debug:            counter/0[4]: 755150182
debug:            counter/1[4]: 235870145
debug:            counter/2[4]: 235870145
debug:               scaled[4]: 0
debug:            counter/0[5]: 1001411258
debug:            counter/1[5]: 235868838
debug:            counter/2[5]: 235868838
debug:               scaled[5]: 0
debug:            counter/0[6]: 27897
debug:            counter/1[6]: 235868560
debug:            counter/2[6]: 235868560
debug:               scaled[6]: 0
debug:            counter/0[7]: 2910
debug:            counter/1[7]: 235868151
debug:            counter/2[7]: 235868151
debug:               scaled[7]: 0
debug:              runtime[0]: 235980257
debug:             walltime[0]: 236770942
debug:       runtime_cycles[0]: 755114546
debug:            counter/0[0]: 235980257
debug:            counter/1[0]: 235980257
debug:            counter/2[0]: 235980257
debug:               scaled[0]: 0
debug:            counter/0[1]: 3
debug:            counter/1[1]: 235980049
debug:            counter/2[1]: 235980049
debug:               scaled[1]: 0
debug:            counter/0[2]: 1
debug:            counter/1[2]: 235979907
debug:            counter/2[2]: 235979907
debug:               scaled[2]: 0
debug:            counter/0[3]: 135
debug:            counter/1[3]: 235979780
debug:            counter/2[3]: 235979780
debug:               scaled[3]: 0
debug:            counter/0[4]: 755114546
debug:            counter/1[4]: 235979652
debug:            counter/2[4]: 235979652
debug:               scaled[4]: 0
debug:            counter/0[5]: 1001439771
debug:            counter/1[5]: 235979304
debug:            counter/2[5]: 235979304
debug:               scaled[5]: 0
debug:            counter/0[6]: 23723
debug:            counter/1[6]: 235979050
debug:            counter/2[6]: 235979050
debug:               scaled[6]: 0
debug:            counter/0[7]: 2213
debug:            counter/1[7]: 235978820
debug:            counter/2[7]: 235978820
debug:               scaled[7]: 0
debug:              runtime[0]: 235888002
debug:             walltime[0]: 236700533
debug:       runtime_cycles[0]: 754881504
debug:            counter/0[0]: 235888002
debug:            counter/1[0]: 235888002
debug:            counter/2[0]: 235888002
debug:               scaled[0]: 0
debug:            counter/0[1]: 2
debug:            counter/1[1]: 235887793
debug:            counter/2[1]: 235887793
debug:               scaled[1]: 0
debug:            counter/0[2]: 1
debug:            counter/1[2]: 235887645
debug:            counter/2[2]: 235887645
debug:               scaled[2]: 0
debug:            counter/0[3]: 135
debug:            counter/1[3]: 235887499
debug:            counter/2[3]: 235887499
debug:               scaled[3]: 0
debug:            counter/0[4]: 754881504
debug:            counter/1[4]: 235887368
debug:            counter/2[4]: 235887368
debug:               scaled[4]: 0
debug:            counter/0[5]: 1001401731
debug:            counter/1[5]: 235887024
debug:            counter/2[5]: 235887024
debug:               scaled[5]: 0
debug:            counter/0[6]: 24212
debug:            counter/1[6]: 235886786
debug:            counter/2[6]: 235886786
debug:               scaled[6]: 0
debug:            counter/0[7]: 1824
debug:            counter/1[7]: 235886560
debug:            counter/2[7]: 235886560
debug:               scaled[7]: 0

 Performance counter stats for '/home/mingo/loop_1b_instructions' (3 runs):

     235.913377  task-clock-msecs     #      0.997 CPUs    ( +-   0.011% )
              2  context-switches     #      0.000 M/sec   ( +-   0.000% )
              1  CPU-migrations       #      0.000 M/sec   ( +-   0.000% )
            136  page-faults          #      0.001 M/sec   ( +-   0.730% )
      755048744  cycles               #   3200.534 M/sec   ( +-   0.009% )
     1001417586  instructions         #      1.326 IPC     ( +-   0.001% )
          25277  cache-references     #      0.107 M/sec   ( +-   3.988% )
           2315  cache-misses         #      0.010 M/sec   ( +-   9.845% )

    0.236706075  seconds time elapsed.

This allows the summary stats to be validated.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 15:40:35 +02:00
Ingo Molnar 42202dd56c perf stat: Add feature to run and measure a command multiple times
Add the --repeat <n> feature to perf stat, which repeats a given
command up to a 100 times, collects the stats and calculates an
average and a stddev.

For example, the following oneliner 'perf stat' command runs hackbench
5 times and prints a tabulated result of all metrics, with averages
and noise levels (in percentage) printed:

 aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10
 Time: 0.117
 Time: 0.108
 Time: 0.089
 Time: 0.088
 Time: 0.100

 Performance counter stats for '/home/mingo/hackbench 10' (5 runs):

    1243.989586  task-clock-msecs     #     10.460 CPUs    ( +-   4.720% )
          47706  context-switches     #      0.038 M/sec   ( +-  19.706% )
            387  CPU-migrations       #      0.000 M/sec   ( +-   3.608% )
          17793  page-faults          #      0.014 M/sec   ( +-   0.354% )
     3770941606  cycles               #   3031.329 M/sec   ( +-   4.621% )
     1566372416  instructions         #      0.415 IPC     ( +-   2.703% )
       16783421  cache-references     #     13.492 M/sec   ( +-   5.202% )
        7128590  cache-misses         #      5.730 M/sec   ( +-   7.420% )

    0.118924455  seconds time elapsed.

The goal of this feature is to allow the reliance on these accurate
statistics and to know how many times a command has to be repeated
for the noise to go down to an acceptable level.

(The -v option can be used to see a line printed out as each run progresses.)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 15:18:57 +02:00
Ingo Molnar 44175b6f39 perf stat: Reorganize output
- use IPC for the instruction normalization output
 - CPUs for the CPU utilization factor value.
 - print out time elapsed like the other rows
 - tidy up the task-clocks/cpu-clocks printout

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 13:40:03 +02:00
Frederic Weisbecker 971738f366 perf annotate: Print a sorted summary of annotated overhead lines
It's can be very annoying to scroll down perf annotated output
until we find relevant overhead.

Using the -l option, you can now have a small summary sorted per
overhead in the beginning of the output.

Example:

./perf annotate -l -k ../../vmlinux -s __lock_acquire

Sorted summary for file ../../vmlinux
----------------------------------------------

   12.04 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1653
    4.61 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1740
    3.77 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1775
    3.56 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1653
    2.93 /home/fweisbec/linux/linux-2.6-tip/arch/x86/include/asm/irqflags.h:15
    2.83 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2545
    2.30 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2594
    2.20 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2388
    2.20 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:730
    2.09 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:730
    2.09 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:138
    1.88 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2548
    1.47 /home/fweisbec/linux/linux-2.6-tip/arch/x86/include/asm/irqflags.h:15
    1.36 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2594
    1.36 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:730
    1.26 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1654
    1.26 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1653
    1.15 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2592
    1.15 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1740
    1.15 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1740

[...]

Only overhead over 0.5% are summarized.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1244844682-12928-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:58:23 +02:00
Frederic Weisbecker 301406b9c6 perf annotate: Print the filename:line for annotated colored lines
When we have a colored line in perf annotate, ie a middle/high
overhead one, it's sometimes useful to get the matching line
and filename from the source file, especially this path prepares
to another subsequent one which will print a sorted summary of
midle/high overhead lines in the beginning of the output.

Filename:Lines have the same color than the concerned ip lines.

It can be slow because it relies on addr2line. We could also
use objdump with -l but that implies we would have to bufferize
objdump output and parse it to filter the relevant lines since
we want to print a sorted summary in the beginning.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1244844682-12928-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 12:58:23 +02:00
Mike Frysinger 018df72dd0 perf_counter: Start documenting HAVE_PERF_COUNTERS requirements
Help out arch porters who want to support perf counters by listing some
basic requirements.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1244827063-24046-1-git-send-email-vapier@gentoo.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-12 19:37:30 +02:00
Peter Zijlstra 974802eaa1 perf_counter: Add forward/backward attribute ABI compatibility
Provide for means of extending the perf_counter_attr in a 'natural' way.

We allow growing the structure by appending fields at the end by specifying
the full structure size inside it.

When a new kernel sees a smaller (old) structure, it will 0 pad the tail.
When an old kernel sees a larger (new) structure, it will verify the tail
consists of 0s, otherwise fail.

If we fail due to a size-mismatch, we return -E2BIG and write the kernel's
native attribe size back into the provided structure.

Furthermore, add some attribute verification, so that we'll fail counter
creation when unknown bits are present (PERF_SAMPLE, PERF_FORMAT, or in
the __reserved fields).

(This ABI detail is introduced while keeping the existing syscall ABI.)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-12 14:28:52 +02:00
Peter Zijlstra bbd36e5e6a perf record: Explicity program a default counter
Up until now record has worked on the assumption that type=0, config=0
was a suitable configuration - which it is. Lets make this a little more
explicit and more readable via the use of proper symbols.

[ Impact: cleanup ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-12 14:28:52 +02:00
Yong Wang faafec1e61 perf_counter tools: Remove one L1-data alias
Otherwise all L1-instruction aliases will be recognized as
L1-data by strcasestr() when calling function parse_aliases.

Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090612031706.GA22126@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-12 13:45:09 +02:00
Peter Zijlstra f4dbfa8f31 perf_counter: Standardize event names
Pure renames only, to PERF_COUNT_HW_* and PERF_COUNT_SW_*.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 17:54:15 +02:00
Ingo Molnar 729ff5e2aa perf_counter tools: Clean up u64 usage
A build error slipped in:

 builtin-report.c: In function ‘hist_entry__fprintf’:
 builtin-report.c:711: error: format ‘%12d’ expects type ‘int’, but argument 3 has type ‘uint64_t’

Because we got a bit sloppy with those types. uint64_t really sucks,
because there's no printf format for it. So standardize on __u64
instead - for all types that go to or come from the ABI (which is __u64),
or for values that need to be large enough even on 32-bit.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 16:48:38 +02:00
Peter Zijlstra ea1900e571 perf_counter tools: Normalize data using per sample period data
When we use variable period sampling, add the period to the sample
data and use that to normalize the samples.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 02:39:01 +02:00
Peter Zijlstra f7b7c26e01 perf_counter tools: Propagate signals properly
Currently report and stat catch SIGINT (and others) without altering
their exit state. This means that things like:

   while :; do perf stat ./foo ; done

Loops become hard-to-interrupt, because bash never sees perf terminate
due to interruption. Fix this.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-10 16:55:27 +02:00
Peter Zijlstra 4502d77c1d perf_counter tools: Small frequency related fixes
Create the counter in a disabled state and only enable it after we
mmap() the buffer, this allows us to see the first few samples (and
observe the frequency ramp).

Furthermore, print the period in the verbose report.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-10 16:55:26 +02:00
Ingo Molnar aefcf37b82 perf_counter tools: Standardize color printing
The rule is:

 - high overhead: red
 -  mid overhead: green
 -  low overhead: normal (white/black)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-08 23:15:28 +02:00
Pekka Enberg 80d496be89 perf report: Add support for profiling JIT generated code
This patch adds support for profiling JIT generated code to 'perf
report'. A JIT compiler is required to generate a "/tmp/perf-$PID.map"
symbols map that is parsed when looking and displaying symbols.

Thanks to Peter Zijlstra for his help with this patch!

Example "perf report" output with the Jato JIT:

 #
 # (40311 samples)
 #
 # Overhead           Command  Shared Object              Symbol
 # ........  ................  .........................  ......
 #
     97.80%              jato  /tmp/perf-11915.map        [.] Fibonacci.fib(I)I
      0.56%              jato  00000000b7fa023b           0x000000b7fa023b
      0.45%              jato  /tmp/perf-11915.map        [.] Fibonacci.main([Ljava/lang/String;)V
      0.38%              jato  [kernel]                   [k] get_page_from_freelist
      0.06%              jato  [kernel]                   [k] kunmap_atomic
      0.05%              jato  ./jato                     [.] utf8Hash
      0.04%              jato  ./jato                     [.] executeJava
      0.04%              jato  ./jato                     [.] defineClass

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: a.p.zijlstra@chello.nl
Cc: acme@redhat.com
LKML-Reference: <Pine.LNX.4.64.0906082111590.12407@melkki.cs.Helsinki.FI>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-08 23:10:44 +02:00
Ingo Molnar e779898aa7 perf stat: Print out instructins/cycle metric
Before:

     7549326754  cycles               #    3201.811 M/sec
    10007594937  instructions         #    4244.408 M/sec

After:

     7542051194  cycles               #    3201.996 M/sec
    10007743852  instructions         #    4248.811 M/sec # 1.327 per cycle

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-07 18:14:46 +02:00
Ingo Molnar a14832ff97 perf report: Print more expressive message in case of file open error
Before:

 $ perf report
 failed to open file: No such file or directory

After:

 $ perf report
  failed to open file: perf.data  (try 'perf record' first)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-07 17:58:23 +02:00
Ingo Molnar 30c806a094 perf_counter tools: Handle kernels with !CONFIG_PERF_COUNTER
If perf is run on a !CONFIG_PERF_COUNTER kernel right now it
bails out with no messages or with confusing messages.

Standardize this case some more and explain the situation.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-07 17:46:24 +02:00
Ingo Molnar 3da297a60f perf record: Fall back to cpu-clock-ticks if no PMU
On architectures/CPUs without PMU support but with perfcounters
enabled 'perf record' currently fails because it cannot create a
cycle based hw-perfcounter.

Fall back to the cpu-clock-tick sw-perfcounter in this case, which
is hrtimer based and will always work (as long as perfcounters
are enabled).

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-07 17:39:02 +02:00
Ingo Molnar 716c69feca perf top: Fall back to cpu-clock-tick hrtimer sampling if no cycle counter available
On architectures/CPUs without PMU support but with perfcounters
enabled 'perf top' currently fails because it cannot create a
cycle based hw-perfcounter.

Fall back to the cpu-clock-tick sw-perfcounter in this case, which
is hrtimer based and will always work (as long as perfcounters
is enabled).

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-07 17:31:52 +02:00
Ingo Molnar 743ee1f804 perf stat: Continue even on counter creation error
Before:

 $ perf stat ~/hackbench 5

 error: syscall returned with -1 (No such device)

After:

 $ perf stat ~/hackbench 5
 Time: 1.640

 Performance counter stats for '/home/mingo/hackbench 5':

    6524.570382  task-clock-ticks     #       3.838 CPU utilization factor
          35704  context-switches     #       0.005 M/sec
            191  CPU-migrations       #       0.000 M/sec
           8958  page-faults          #       0.001 M/sec
  <not counted>  cycles
  <not counted>  instructions
  <not counted>  cache-references
  <not counted>  cache-misses

 Wall-clock time elapsed:  1699.999995 msecs

Also add -v (--verbose) option to allow the printing of failed
counter opens.

Plus dont print 'inf' if wall-time is zero (due to jiffies granularity),
instead skip the printing of the CPU utilization factor.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-07 17:08:59 +02:00
Frederic Weisbecker 2f01190aa6 perf top: Wait for a minimal set of events before reading first snapshot
The first snapshot reading often occur before any events have
been read in the mapped perfcounter files.

Just wait until we have at least one event before starting the
snapshot, or the delay before the first set of entries to be
displayed may be long in case of low refresh rate.

Note: we could also use a semaphore to wait before
"print_entries" number of eveents is reached, but again this
value is tunable and we can't ensure we will even reach it.
Also we could base on a default mimimum set of entries for the
first refresh, say 15, but again, the minimal sample is
tunable, and we could end up displaying nothing until we have a
minimal default set of events, which can take some time in case
of high samples filters.

Hence this simple solution which partially covers the default
case.

[ Impact: fix display artifacts in perf top ]

Signed-off-by: Frederic Weisbecker <fweisbeec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1244322643-6447-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-07 09:32:44 +02:00
Ingo Molnar 23b87116c7 perf annotate: Fix command line help text
Arjan noticed this bug in the perf annotate help output:

    -s, --symbol <file>   symbol to annotate

that should be <symbol> instead.

Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 21:25:29 +02:00
Arjan van de Ven e9fbc9dc92 perf_counter tools: Initialize a stack variable before use
the "perf report" utility crashed in some circumstances
because the "sym" stack variable was not initialized before used
(as also proven by valgrind).

With this fix both the crash goes away and valgrind no longer complains.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 21:22:33 +02:00
Ingo Molnar 39273ee975 perf annotate: Automatically pick up vmlinux in the local directory
Right now kernel debug info does not get resolved by default, because
we dont know where to look for the vmlinux.

The -k option can be used for that - but if no option is given, pick
up vmlinux files in the current directory - in case a kernel hacker
runs profiling from the source directory that the kernel was built in.

The real solution would be to embedd the location (and perhaps the
date/timestamp) of the vmlinux file in /proc/kallsyms, so that
tools can pick it up automatically.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 21:17:03 +02:00
Ingo Molnar 8953645fec perf_counter tools: Fix error condition in parse_aliases()
gcc warned about this bug:

util/parse-events.c: In function ‘parse_generic_hw_symbols’:
util/parse-events.c:175: warning: comparison is always false due to limited range of data type
util/parse-events.c:182: warning: comparison is always false due to limited range of data type
util/parse-events.c:190: warning: comparison is always false due to limited range of data type

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 21:09:08 +02:00
Arjan van de Ven 7d37a0cbd6 perf_counter tools: Warning fixes on 32-bit
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 20:46:19 +02:00
Ingo Molnar 864709302a perf_counter tools: Move from Documentation/perf_counter/ to tools/perf/
Several people have suggested that 'perf' has become a full-fledged
tool that should be moved out of Documentation/. Move it to the
(new) tools/ directory.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 20:33:43 +02:00