Commit Graph

3829 Commits

Author SHA1 Message Date
Daniel Borkmann 23a9544206 selftests: net: add PF_PACKET TPACKET v1/v2/v3 selftests
This patch adds a simple test case that probes the packet socket's
TPACKET_V1, TPACKET_V2 and TPACKET_V3 behavior regarding mmap(2)'ed
I/O for a small burst of 100 packets. The test currently runs for ...

  TPACKET_V1: RX_RING, TX_RING
  TPACKET_V2: RX_RING, TX_RING
  TPACKET_V3: RX_RING

... and will output on success:

  test: TPACKET_V1 with PACKET_RX_RING .................... 100 pkts (9600 bytes)
  test: TPACKET_V1 with PACKET_TX_RING .................... 100 pkts (9600 bytes)
  test: TPACKET_V2 with PACKET_RX_RING .................... 100 pkts (9600 bytes)
  test: TPACKET_V2 with PACKET_TX_RING .................... 100 pkts (9600 bytes)
  test: TPACKET_V3 with PACKET_RX_RING .................... 100 pkts (9600 bytes)
  OK. All tests passed

Reusable parts of psock_fanout.c have been put into a psock_lib.h
file for common usage. Test case successfully tested on x86_64.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07 17:02:24 -04:00
Arnaldo Carvalho de Melo d06f791179 perf map browser: Exit just on well known key presses
Initial motivation was to avoid the confusing exit when when '/' is
pressed in non verbose mode, as specified in the help line searches
are only available in verbose mode.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-20xezxim2y4agmkx7f3sucll@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:23:55 -03:00
Arnaldo Carvalho de Melo 6692c262df perf tools: Remove dependency on libnewt
Now that the map browser shares the input routine with the hists
browser, there is no need for using any libnewt routine, so remove all
traces except for honouring NO_NEWT=1 on the makefile command line as an
indication that TUI support is not needed, in fact it just sets
NO_SLANG=1.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wae5o7xca9m52bj1re28jc5j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:23:21 -03:00
Arnaldo Carvalho de Melo a403253634 perf map browser: Use ui_browser__input_window()
Instead of an ad-hoc, libnewt based equivalent.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-elrijp95pijt66y6mmij4xm1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:23:10 -03:00
Naohiro Aota 707ef2e69a perf python: Fix dependency for python/perf.so
The python/perf.so binding lacks dependency for libtraceevent.a so that
it cause the following error building python/perf.so. This patch
introduce the dependency for it.

   $ make python/perf.so
       CHK -fstack-protector-all
       CHK -Wstack-protector
       CHK -Wvolatile-register-var
       CHK -D_FORTIFY_SOURCE=2
       CHK bionic
       CHK libelf
       CHK libdw
       CHK libunwind
       CHK -DLIBELF_MMAP
       CHK libaudit
       CHK libnewt
       CHK gtk2
       CHK -DHAVE_GTK_INFO_BAR
       CHK perl
       CHK python
       CHK python version
       CHK libbfd
       CHK -DHAVE_STRLCPY
       CHK -DHAVE_ON_EXIT
       CHK -DBACKTRACE_SUPPORT
       CHK libnuma
       GEN python/perf.so
   x86_64-pc-linux-gnu-gcc: error: ../lib/traceevent/libtraceevent.a: No such file or directory
   error: command 'x86_64-pc-linux-gnu-gcc' failed with exit status 1
   cp: cannot stat 'python_ext_build/lib/perf.so': No such file or directory
   make: *** [python/perf.so] Error 1

Signed-off-by: Naohiro Aota <naota@elisp.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/87wqswzznx.fsf@locke.i-did-not-set--mail-host-address--so-tickle-me
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:23:01 -03:00
Arnaldo Carvalho de Melo b5ded71397 perf tools: Convert needless static variable to local
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-k85ajz97xbrd8fkt2a8pp7q1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:22:48 -03:00
Arnaldo Carvalho de Melo 1c6763cb99 Revert "perf sched: Handle PERF_RECORD_EXIT events"
This reverts commit 0439539f72.

This caused this segfault:

[root@sandy linux]# perf sched rec
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.306 MB perf.data (~57062 samples) ]
perf
[root@sandy linux]# perf sched lat
perf: builtin-sched.c:781: thread_atoms_search: Assertion `!(thread != atoms->thread)' failed.
Aborted (core dumped)
[root@sandy linux]#

Further investigation is needed to check that even with machine__remove_thread()
not really deleting the thread referenced in the PERF_RECORD_EXIT (it goes to
machine->dead_threads, because references may still exist to them in things like
 hist, etc) some event later comes for this dead thread and then
machine__findnew_thread() will create a new thead instance that will not be the
same as the one referenced by work_atoms->thread in thread_atoms_search().

For now just revert this patch to get the 'perf sched lat' back working.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
echo Link: http://lkml.kernel.org/n/tip-`ranpwd -l 24`@git.kernel.org
Link: http://lkml.kernel.org/n/tip-hg4s6e5txiwqe00h8rdg1sin@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:22:34 -03:00
Namhyung Kim 62667746a6 perf tools: Fix output of symbol_daddr offset
The symbol addresses in a dso have relative offsets from the start of a
mapping.  So in order to ouput correct offset value from @ip, one of
them should be converted.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1359040242-8269-19-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:22:15 -03:00
Stephane Eranian bad4091791 perf machine: Detect data vs. text mappings
Leverages the PERF_RECORD_MISC_MMAP_DATA bit in the RECORD_MMAP record
header. When the bit is set then the mapping type is set to
MAP__VARIABLE.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-17-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:22:00 -03:00
Stephane Eranian 028f12ee6b perf tools: Add new mem command for memory access profiling
This new command is a wrapper on top of perf record and perf report to
make it easier to configure for memory access profiling.

To record loads:
$ perf mem -t load rec .....

To record stores:
$ perf mem -t store rec .....

To get the report:
$ perf mem -t load rep

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-15-git-send-email-eranian@google.com
[ Fixed minor conflict with 66857b5 "Sort command-list.txt alphabetically" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:21:44 -03:00
Stephane Eranian f4f7e28d0e perf report: Add support for mem access profiling
This patch adds the --mem-mode option to perf report.

This mode requires a perf.data file created with memory access samples.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-13-git-send-email-eranian@google.com
[ Removed duplicates in the --sort help, man page needs updating,
  Fixed minor conflict with 328ccda "perf report: Add --no-demangle option" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:21:28 -03:00
Stephane Eranian ccf49bfc6b perf record: Add support for mem access profiling
We use the -W option to obtain the cost of the memory accesses.

Data address sampling is obtained via the -d option.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-14-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:20:28 -03:00
Stephane Eranian 98a3b32c99 perf tools: Add mem access sampling core support
This patch adds the sorting and histogram support
functions to enable profiling of memory accesses.

The following sorting orders are added:
 - symbol_daddr: data address symbol (or raw address)
 - dso_daddr: data address shared object
 - locked: access uses locked transaction
 - tlb : TLB access
 - mem : memory level of the access (L1, L2, L3, RAM, ...)
 - snoop: access snoop mode

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-12-git-send-email-eranian@google.com
[ committer note: changed to cope with fc5871ed, the move of methods to
  machine.[ch], and the rename of dsrc to data_src, to match the change
  made in the PERF_SAMPLE_DSRC in a previous patch. ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:20:13 -03:00
Andi Kleen 05484298cb perf tools: Add support for weight v7 (modified)
perf record has a new option -W that enables weightened sampling.

Add sorting support in top/report for the average weight per sample and the
total weight sum. This allows to both compare relative cost per event
and the total cost over the measurement period.

Add the necessary glue to perf report, record and the library.

v2: Merge with new hist refactoring.
v3: Fix manpage. Remove value check.
Rename global_weight to weight and weight to local_weight.
v4: Readd sort keys to manpage
v5: Move weight to end
v6: Move weight to template
v7: Rename weight key.

Original patch from Andi modified by Stephane Eranian <eranian@google.com>
to include ONLY the weight supporting code and apply to pristine 3.8.0-rc4.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-6-git-send-email-eranian@google.com
[ committer note: changed to cope with fc5871ed and the hists_link perf test entry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:19:43 -03:00
Masanari Iida 1051e9b33b treewide: Fix typos in kernel messages
Correct spelling typos in various part of printk.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-31 17:50:31 +02:00
David S. Miller e2a553dbf1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	include/net/ipip.h

The changes made to ipip.h in 'net' were already included
in 'net-next' before that header was moved to another location.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-27 13:52:49 -04:00
Namhyung Kim 328ccdace8 perf report: Add --no-demangle option
It's sometimes useful to see undemangled raw symbol name for example
other tools using the perf output to do manipulation of binaries.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: William Cohen <wcohen@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=55571
Link: http://lkml.kernel.org/r/1364203098-17741-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-26 16:38:21 -03:00
Greg Kroah-Hartman e58b9a25ee ASoC/extcon: arizona: Fix interaction between HPDET and headphone outputs
This patch series covers both ASoC and extcon subsystems and fixes an
 interaction between the HPDET function and the headphone outputs - we
 really shouldn't run HPDET while the headphone is active.  The first
 patch is a refactoring to make the extcon side easier.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRUcMYAAoJELSic+t+oim9PkAP/RQWC98LrD3kQgVk22MIDdyk
 P7dr37AePy+nMHP/sp3XIVyeD6pwuRWrlf31jAgMsXSb/+8ymJ3oO3t6aPUa9V9+
 KsxxoSUW+/ZO+88aK4r/w/Y45XMqMXsoEwllIxZoEpHXhDIxYFyF8wloPBXLzzbw
 AALowigrNbeYuijr5R1oV+kUOcT8DpzbamoK0jSbpdBdoPEP3ypD/yJTdi/RSyu/
 ELRNZFy4jUw2B3HVOB1YxUeCPpPA63u1oTypFgD7XrQX5v4MDuWyCv5bbBd7KhBk
 vbK/PHti5CMvi5RbA2EHbkI+n/Lb1qfnxIggN5BaSOQ1tlqrHnMlHYoSE/Sjterh
 TDGyYDNrWU1Wve2NTDJEd8oECPwm+8ABBnRYgwtnth/4D/EFkT+6Pv8FuIlYg1ku
 Tj/jwS2q/q26WfssDOph/GfUXtaagMALY99yy/HXM9RPYztOnUyvJIXLzKUUdapT
 KluChggzbj5ytsSy3L808BkgDxYTwHxva4q+n0ST4hDIeqe95HyE8gZA8jrYOf7T
 oA4tsBL3i0YGkPoPkVhMY9qeV0AOwDVlZioGP9Qcs8EI/Z9Bri8NZ4iW8VWkNoTt
 QG7EyuJy90VI/XvGgpITXKXxWQStMZG4+df6pXcn1h47K6ujtDyK/PBBt3t0OPCp
 WihSDHwuFQPSDWYULbZQ
 =gc7f
 -----END PGP SIGNATURE-----

Merge tag 'arizona-extcon-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into char-misc-next

Mark writes:

	ASoC/extcon: arizona: Fix interaction between HPDET and headphone outputs

	This patch series covers both ASoC and extcon subsystems and fixes an
	interaction between the HPDET function and the headphone outputs - we
	really shouldn't run HPDET while the headphone is active.  The first
	patch is a refactoring to make the extcon side easier.
2013-03-26 09:19:02 -07:00
Stephane Eranian 12c08a9f59 perf stat: Add per-core aggregation
This patch adds the --per-core option to perf stat.

This option is used to aggregate system-wide counts
on a per physical core basis. On processors with
hyperthreading, this means counts of all HT threads
running on a physical core are aggregated.

This mode is useful to find imblance between physical
cores running an uniform workload. Cores are identified
by socket: S0-C1, means physical core 1 on socket 0. Note
that cores are identified using their physical core id,
thus their numbering may not be continuous.

Per core aggregation can be combined with interval printing:

 # perf stat -a --per-core -I 1000 -e cycles sleep 1000
 #           time core         cpus             counts events
      1.000090030 S0-C0           1          4,765,747 cycles
      1.000090030 S0-C1           1          5,580,647 cycles
      1.000090030 S0-C2           1            221,181 cycles
      1.000090030 S0-C3           1            266,092 cycles

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360846649-6411-4-git-send-email-eranian@google.com
[ committer note: Remove parts already applied on 86ee6e1 to keep bisectability ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-25 16:13:26 -03:00
Stephane Eranian d4304958a2 perf stat: Rename --aggr-socket to --per-socket
To make it more obvious what this option does as suggested by Andi on
LKML.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360846649-6411-3-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-25 16:09:24 -03:00
Stephane Eranian 86ee6e18f6 perf stat: Refactor aggregation code
Refactor aggregation code by introducing a single aggr_mode variable and an
enum for aggregation.

Also refactor cpumap code having to do with cpu to socket mappings. All in
preparation for extended modes, such as cpu -> core.

Also fix socket aggregation and ensure that sockets are printed in increasing
order.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360846649-6411-2-git-send-email-eranian@google.com
[ committer note: Fixup conflicts with a7e191c "--repeat forever" and
  acf2892 "Use perf_evlist__prepare/start_workload()" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-25 15:29:53 -03:00
Willem de Bruijn 98e821a2a9 net: fix psock_fanout on sparc64
The packetsocket fanout test uses a packet ring. Use TPACKET_V2
instead of TPACKET_V1 to work around a known 32/64 bit issue in
the older ring that manifests on sparc64.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21 14:31:36 -04:00
Namhyung Kim ebf3c675d7 perf tools: Cleanup calc_data_size logic
It's for calculating whole trace data size during reading.  However
relation functions are called only in this file, no need to
conditionalize it with tricky +1 offset and rename the variable to
more meaningful name like trace_data_size.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-21 13:37:37 -03:00
Namhyung Kim 452958fdd0 perf tools: Get rid of die() calls in trace-data-read.c
Convert them to pr_debug() and propagate error code.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-21 13:37:13 -03:00
Namhyung Kim 4a31e56599 perf tools: Get rid of read_or_die() in trace-event-read.c
Rename it to do_read and original do_read to __do_read, and check
their return value.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-21 13:34:13 -03:00
Namhyung Kim a4c983670e perf tools: Get rid of malloc_or_die() in trace-event-read.c
Check return value of malloc() and fail if error.  Now read_string()
can return NULL also check its return value and bail out.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-21 13:32:46 -03:00
Namhyung Kim 3dce2ce3cc perf tools: Handle failure case in trace_report()
If pevent allocation in read_trace_init() fails, trace_report() will
return -1 and *ppevent is set to NULL.  Its callers should check this
case and handle it properly.

This is also a preparation for the removal of *die() calls.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-21 13:30:52 -03:00
Namhyung Kim 7f42b9505a perf tools: Get rid of die() calls from trace-event-info.c
Now remove all remaining die() calls and convert them to check return
value and propagate it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-21 13:30:10 -03:00
Namhyung Kim 8755d5e202 perf tools: Get rid of write_or_die() from trace-event-info.c
Check return value of write and fail if error.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-21 13:15:42 -03:00
Namhyung Kim 5a6fd27ad7 perf tools: Get rid of malloc_or_die() in trace-event-info.c
Check return value of malloc and fail if NULL.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-21 13:12:28 -03:00
Namhyung Kim 454f8c7d26 perf tools: Let get_tracing_file() return NULL to indicate failure.
So that it can be used by other places.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-21 13:09:42 -03:00
Namhyung Kim 62baca8aed perf tools: Get rid of redundant _FILE_OFFSET_BITS definition
We define it in the Makefile so no need to duplicate it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363686376-29525-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-21 13:04:00 -03:00
Daniel Borkmann e306e2c13b filter: add minimal BPF JIT image disassembler
This is a minimal stand-alone user space helper, that allows for debugging or
verification of emitted BPF JIT images. This is in particular useful for
emitted opcode debugging, since minor bugs in the JIT compiler can be fatal.
The disassembler is architecture generic and uses libopcodes and libbfd.

How to get to the disassembly, example:

  1) `echo 2 > /proc/sys/net/core/bpf_jit_enable`
  2) Load a BPF filter (e.g. `tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24`)
  3) Run e.g. `bpf_jit_disasm -o` to disassemble the most recent JIT code output

`bpf_jit_disasm -o` will display the related opcodes to a particular instruction
as well. Example for x86_64:

$ ./bpf_jit_disasm
94 bytes emitted from JIT compiler (pass:3, flen:9)
ffffffffa0356000 + <x>:
   0:	push   %rbp
   1:	mov    %rsp,%rbp
   4:	sub    $0x60,%rsp
   8:	mov    %rbx,-0x8(%rbp)
   c:	mov    0x68(%rdi),%r9d
  10:	sub    0x6c(%rdi),%r9d
  14:	mov    0xe0(%rdi),%r8
  1b:	mov    $0xc,%esi
  20:	callq  0xffffffffe0d01b71
  25:	cmp    $0x86dd,%eax
  2a:	jne    0x000000000000003d
  2c:	mov    $0x14,%esi
  31:	callq  0xffffffffe0d01b8d
  36:	cmp    $0x6,%eax
[...]
  5c:	leaveq
  5d:	retq

$ ./bpf_jit_disasm -o
94 bytes emitted from JIT compiler (pass:3, flen:9)
ffffffffa0356000 + <x>:
   0:	push   %rbp
	55
   1:	mov    %rsp,%rbp
	48 89 e5
   4:	sub    $0x60,%rsp
	48 83 ec 60
   8:	mov    %rbx,-0x8(%rbp)
	48 89 5d f8
   c:	mov    0x68(%rdi),%r9d
	44 8b 4f 68
  10:	sub    0x6c(%rdi),%r9d
	44 2b 4f 6c
[...]
  5c:	leaveq
	c9
  5d:	retq
	c3

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21 11:35:41 -04:00
Ingo Molnar 0a11953851 perf/core improvements and fixes:
. Honor parallel jobs, fix from Borislav Petkov
 
 . Introduce tools/lib/lk library, initially just removing duplication
   among tools/perf and tools/vm. from Borislav Petkov
 
 . Fix build on non-glibc systems due to libio.h absence, from Cody P Schafer.
 
 . Remove some perf_session and tracing dead code, from David Ahern.
 
 . Introduce perf stat --repeat forever, from Frederik Deweerdt.
 
 . Add perf test entries for checking --cpu in record and stat, from Jiri Olsa.
 
 . Add perf test entries for checking breakpoint overflow signal handler issues,
   from Jiri Olsa.
 
 . Add perf test entry for for checking number of EXIT events, from Namhyung Kim.
 
 . Simplify some perf_evlist methods and to allow 'stat' to share code with
   'record' and 'trace'.
 
 . Remove dead code in related to libtraceevent integration, from Namhyung Kim.
 
 . Event group view for 'annotate' in --stdio, --tui and --gtk, from Namhyung Kim.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJRRzSdAAoJENZQFvNTUqpA7zoP/jG/sMD4h1TfXjZr5PXKNunh
 6XHluOh9ndIWFnvUffU5UbYFyRQml9Djjs7wewqBJCdDm6IDOwtTIz/5Eo5ubADY
 Bu27R8+WbgwsklRCYpdnYO8rJ88sqT9NQYhrtgaaq5UCtGosGsIQUnvjqY8BYILv
 yiNwARpaVZwUEd01ZVxKjriPo6fXftLo05NgC/gRrC81TzTwgRAhioWETVG8gxYK
 8ta/Q5ITU5oJbq9cIMPHgWzj17JI2rDC4dtTdW0uGqK1/5fkDhg/B1lGmMAXKJG/
 wh5EpbcK/Ce6Mns84g31jO1MfQjXWqBmv3EjqsBeDWbVnh02qo5Ej0ktswXTA7C4
 5aV3tvAgeWQc9xjiCoJjeSjX02ypABu/uzaOGt1uFvSsBZ1vPUzXSQj6BwUBlElI
 ojbNSprDRQW56hwcFEzMH2UIOeWzfPCX6sAPK8Wx++tas3PpY3dn/pBZUeU2IlH8
 vr7QqieIdGn/l2j0bsuqHt04r8t/q7tkwX09zAn42jNF5//ZRLx3KuQ5kyaKjGSj
 +S+h2crQm07GwNmRtvIF4gA+/22cu0NhHvlLgZUsuiw01vezkS2v/XDupChjyaMl
 OU9/4XUopwf9FSQ5OCKh7QpL6TFXawUgcKF1ooh5DY33qLX934vXPhygiqSOrMaQ
 bHtB+Q2SJUy8KJT5m+Cw
 =mrYT
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Conflicts:
	tools/Makefile

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

. Honor parallel jobs, fix from Borislav Petkov

. Introduce tools/lib/lk library, initially just removing duplication
  among tools/perf and tools/vm. from Borislav Petkov

. Fix build on non-glibc systems due to libio.h absence, from Cody P Schafer.

. Remove some perf_session and tracing dead code, from David Ahern.

. Introduce perf stat --repeat forever, from Frederik Deweerdt.

. Add perf test entries for checking --cpu in record and stat, from Jiri Olsa.

. Add perf test entries for checking breakpoint overflow signal handler issues,
  from Jiri Olsa.

. Add perf test entry for for checking number of EXIT events, from Namhyung Kim.

. Simplify some perf_evlist methods and to allow 'stat' to share code with
  'record' and 'trace'.

. Remove dead code in related to libtraceevent integration, from Namhyung Kim.

. Event group view for 'annotate' in --stdio, --tui and --gtk, from Namhyung Kim.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[ resolved the trivial merge conflict with upstream ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-21 11:06:12 +01:00
David S. Miller a6f68034de net: Move selftests to common net/ subdirectory.
Suggested-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 15:07:56 -04:00
Daniel Baluta 4c1d8d0617 net: fix psock_fanout selftest bind error message
Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 13:42:41 -04:00
David S. Miller 61816596d1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull in the 'net' tree to get Daniel Borkmann's flow dissector
infrastructure change.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 12:46:26 -04:00
Willem de Bruijn 23a9072e3a net: fix psock_fanout selftest hash collision
Fix flaky results with PACKET_FANOUT_HASH depending on whether the
two flows hash into the same packet socket or not.

Also adds tests for PACKET_FANOUT_LB and PACKET_FANOUT_CPU and
replaces the counting method with a packet ring.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20 12:33:18 -04:00
Rusty Russell cf994e0afa tools/virtio: remove virtqueue_add_buf() from tests.
Make the rest of the paths use virtqueue_add_sgs or add_outbuf.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-03-20 15:45:07 +10:30
Rusty Russell e538ebaf78 tools/virtio: make vringh_test use inbuf/outbuf.
As expected, the simplified accessors are faster.

for i in `seq 50`; do /usr/bin/time -f 'Wall time:%e' ./vringh_test --indirect --eventidx --parallel --fast-vringh; done 2>&1 | stats --trim-outliers:

Before:
	Using CPUS 0 and 3
	Guest: notified 0, pinged 39062-39063(39063)
	Host: notified 39062-39063(39063), pinged 0
	Wall time:1.760000-2.220000(1.789167)

After:
	Using CPUS 0 and 3
	Guest: notified 0, pinged 39037-39063(39062)
	Host: notified 39037-39063(39062), pinged 0
	Wall time:1.640000-1.810000(1.676875)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-03-20 15:44:53 +10:30
Rusty Russell 13816c768d virtio_ring: virtqueue_add_sgs, to add multiple sgs.
virtio_scsi can really use this, to avoid the current hack of copying
the whole sg array.  Some other things get slightly neater, too.

This causes a slowdown in virtqueue_add_buf(), which is implemented as
a wrapper.  This is addressed in the next patches.

for i in `seq 50`; do /usr/bin/time -f 'Wall time:%e' ./vringh_test --indirect --eventidx --parallel --fast-vringh; done 2>&1 | stats --trim-outliers:

Before:
	Using CPUS 0 and 3
	Guest: notified 0, pinged 39009-39063(39062)
	Host: notified 39009-39063(39062), pinged 0
	Wall time:1.700000-1.950000(1.723542)

After:
	Using CPUS 0 and 3
	Guest: notified 0, pinged 39062-39063(39063)
	Host: notified 39062-39063(39063), pinged 0
	Wall time:1.760000-2.220000(1.789167)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Asias He <asias@redhat.com>
2013-03-20 15:43:29 +10:30
Rusty Russell 1515c5ce26 tools/virtio: add vring_test.
This is mainly to test the drivers/vhost/vringh.c code, but it also
uses the drivers/virtio/virtio_ring.c code for the guest side.

Usage for testing the basic implementation:

	./vringh_test
	# Test with indirect descriptors
	./vringh_test --indirect
	# Test with indirect descriptors and event indexex
	./vringh_test --indirect --eventidx

You can run a parallel stress test by adding --parallel to any of the
above options.

eg ./vringh_test --parallel:
	Using CPUS 0 and 3
	Guest: notified 10107974, pinged 107970
	Host: notified 108158, pinged 3172148

./vringh_test --indirect --eventidx --parallel:
	Using CPUS 0 and 3
	Guest: notified 156357, pinged 156251
	Host: notified 156251, pinged 78179

Average of 50 times doing ./vringh_test --indirect --eventidx --parallel:
	2.840000-3.040000(2.927292)user

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-03-20 14:06:04 +10:30
Rusty Russell 61d0b5a4b2 tools/virtio: separate headers more.
This makes them a bit more like the kernel headers, so we can include more
real kernel headers in our tests.

In addition this means that we don't break tools/virtio with the next
patch.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-03-20 14:00:42 +10:30
Michael S. Tsirkin 73640c991e tools/virtio: fix build for 3.8
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-03-20 14:00:41 +10:30
David S. Miller b44540ea02 net: Get rid of compat defines in psock_fanout.c selftest.
Reported-by: Daniel Baluta <dbaluta@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:08:45 -04:00
David S. Miller 947124460d net: Fix failure string in net-socket selftests Makefile.
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 17:15:14 -04:00
Willem de Bruijn 77f65ebdca packet: packet fanout rollover during socket overload
Changes:
  v3->v2: rebase (no other changes)
          passes selftest
  v2->v1: read f->num_members only once
          fix bug: test rollover mode + flag

Minimize packet drop in a fanout group. If one socket is full,
roll over packets to another from the group. Maintain flow
affinity during normal load using an rxhash fanout policy, while
dispersing unexpected traffic storms that hit a single cpu, such
as spoofed-source DoS flows. Rollover breaks affinity for flows
arriving at saturated sockets during those conditions.

The patch adds a fanout policy ROLLOVER that rotates between sockets,
filling each socket before moving to the next. It also adds a fanout
flag ROLLOVER. If passed along with any other fanout policy, the
primary policy is applied until the chosen socket is full. Then,
rollover selects another socket, to delay packet drop until the
entire system is saturated.

Probing sockets is not free. Selecting the last used socket, as
rollover does, is a greedy approach that maximizes chance of
success, at the cost of extreme load imbalance. In practice, with
sufficiently long queues to absorb bursts, sockets are drained in
parallel and load balance looks uniform in `top`.

To avoid contention, scales counters with number of sockets and
accesses them lockfree. Values are bounds checked to ensure
correctness.

Tested using an application with 9 threads pinned to CPUs, one socket
per thread and sufficient busywork per packet operation to limits each
thread to handling 32 Kpps. When sent 500 Kpps single UDP stream
packets, a FANOUT_CPU setup processes 32 Kpps in total without this
patch, 270 Kpps with the patch. Tested with read() and with a packet
ring (V1).

Also, passes psock_fanout.c unit test added to selftests.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 17:15:04 -04:00
David S. Miller b0aa73bf08 net: Add socket() system call self test.
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 14:49:44 -04:00
Namhyung Kim bc96b361cb perf tests: Add a test case for checking sw clock event frequency
This test case checks frequency conversion of hrtimer-based software
clock events (cpu-clock, task-clock) have valid (non-1) periods.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363574507-18808-2-git-send-email-namhyung@kernel.org
[ committer note: Moved .sample_freq to outside named init block to cope with some gcc versions ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-18 11:43:16 -03:00
Arnaldo Carvalho de Melo d134ffb919 perf stat: Introduce evlist methods to allocate/free the stats
Reducing the noise in the main logic.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o219lnci04hlilxi6711wtcr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-18 11:34:09 -03:00
Ingo Molnar a0bf225db7 perf/urgent fixes:
. perf probe: Fix segfault due to testing the wrong pointer for NULL,
   from Ananth N Mavinakayanahalli.
 
 . libtraceevent: Remove hard coded include to /usr/local/include in
   Makefile, which causes cross builds to include host header files,
   fix from Jack Mitchell.
 
 . perf record: Use the right target interface for synthesizing
   threads when --cpu/-C option is used, fix from Jiri Olsa.
 
 . Check if -DFORTIFY_SOURCE=2 is allowed, as gcc 4.7.2 defines
   it and then the build is broken when it is redefined in perf,
   fix from Marcin Slusarz.
 
 . Fix build with NO_NEWT=1, that can happen explicitely or when
   the newt-devel package is not installed, from Michael Ellerman.
 
 . perf/POWER7: Create a sysfs format entry for Power7 events, missing
   patch from a patchseries already merged, from Sukadev Bhattiprolu.
 
 . Fix LIBNUMA build with glibc 2.12 and older, from Vinson Lee.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJRQblOAAoJENZQFvNTUqpAop0P+wT/5oWqaMU1WgHpP4OTn8dU
 6FkOf9+9IvncOLvE32Kg+hcnLsf9pQWnOxpZgmIxq53d0GI51eNyGPrpedAb89ep
 aa1/C5TUoX18tPiVYB5jahM+f8cw1gZX0CGzdJSpMJF3a0qiXTPAawUnoVJOpPYr
 lPaAmR8sxvm+HwlyBTQM4FFNY36O7inPQxg/gvoW8348Ml9bl63Bh3GytHCOOGLf
 cNgceQu8NpvAG0kqWUFhlZVyYHW4ruD7q+3VUY8ZNltYuA+LAy1Z0FHC8SxJM3B2
 CSKNqRaO8NJ/9eqQ9hg1CHeZVqyNLx58Y0yByGf5LiMUd6DMN7KoQzZEtekEt+L5
 baijxKlFoIX/tneIt2droWIvxzyahhKwUTXbrcaDRPIPw4KqWvy/5+KN+S939yPs
 TnuDai6y+yxPXZMPxLCCharXVGwDWP9HiW7nq25ZLmFILWMUbL42Apb4ErMsEoik
 CRO6ALB9bFn1GkTWPCEMGGmnDGudQSRRwOlgoMEt6XdL5RALv/lgX4HMWfSQ1Wpz
 0GzXRDSokXwAu2QIp2QoqsNspvH/1f4WUjiHiwwDSoontujbJ7/hrqdXYjMuS8cU
 lh0I8p/JpLdvEnCF4vwQo2YozWZEvPtlrYNVx+PqPB1RsNow0WCepHeg/urfxHC3
 qVO/30jASFDpYLyl7h2N
 =aN1j
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

. perf probe: Fix segfault due to testing the wrong pointer for NULL,
  from Ananth N Mavinakayanahalli.

. libtraceevent: Remove hard coded include to /usr/local/include in
  Makefile, which causes cross builds to include host header files,
  fix from Jack Mitchell.

. perf record: Use the right target interface for synthesizing
  threads when --cpu/-C option is used, fix from Jiri Olsa.

. Check if -DFORTIFY_SOURCE=2 is allowed, as gcc 4.7.2 defines
  it and then the build is broken when it is redefined in perf,
  fix from Marcin Slusarz.

. Fix build with NO_NEWT=1, that can happen explicitely or when
  the newt-devel package is not installed, from Michael Ellerman.

. perf/POWER7: Create a sysfs format entry for Power7 events, missing
  patch from a patchseries already merged, from Sukadev Bhattiprolu.

. Fix LIBNUMA build with glibc 2.12 and older, from Vinson Lee.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-18 10:00:56 +01:00
K. Y. Srinivasan 96dd86fa58 Drivers: hv: Add a new driver to support host initiated backup
This driver supports host initiated backup of the guest. On Windows guests,
the host can generate application consistent backups using the Windows VSS
framework. On Linux, we ensure that the backup will be file system consistent.
This driver allows the host to initiate a  "Freeze" operation on all the mounted
file systems in the guest. Once the mounted file systems in the guest are frozen,
the host snapshots the guest's file systems. Once this is done, the guest's file
systems are "thawed".

This driver has a user-level component (daemon) that invokes the appropriate
operation on all the mounted file systems in response to the requests from
the host. The duration for which the guest is frozen is very short - a few seconds.
During this interval, the diff disk is comitted.

In this version of the patch I have addressed the feedback from Olaf Herring.
Also, some of the connector related issues have been fixed.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15 12:12:36 -07:00
Tomas Hozza 75db601496 tools: hv: daemon should check type of received Netlink msg
HyperV KVP daemon should check nlmsg_type in received netlink message
header. If message type is NLMSG_DONE daemon can proceed with processing
otherwise it should wait for next message.

Signed-off-by: Tomas Hozza <thozza@redhat.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15 11:23:16 -07:00
Tomas Hozza f4685fa6d0 tools: hv: daemon setsockopt should use options macros
HyperV daemon should use macros for option values when calling setsockopt.
Using specific numeric values instead of macros is confusing.

Signed-off-by: Tomas Hozza <thozza@redhat.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15 11:23:16 -07:00
Tomas Hozza 77d6a52893 tools: hv: daemon should subscribe only to CN_KVP_IDX group
Previously HyperV daemon set sockaddr_nl.nl_groups to CN_KVP_IDX.
Netlink documentation says: "nl_groups is a bit mask with every bit
representing a netlink group number". Since CN_KVP_IDX value is "9"
HyperV daemon was receiving Netlink messages also from group number
"1" which is used by CGroup Rules Engine Daemon. This caused the
daemon to segfault (at least on 2.6.32 kernel).

HyperV daemon should set nl_groups to zero and specify multicast
group CN_KVP_IDX only by using socket options.

Signed-off-by: Tomas Hozza <thozza@redhat.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15 11:23:15 -07:00
Frederik Deweerdt a7e191c376 perf stat: Introduce --repeat forever
The following patch causes 'perf stat --repeat 0' to be interpreted as
'forever', displaying the stats for every run.

We act as if a single run was asked, and reset the stats in each
iteration. In this mode SIGINT is passed to perf to be able to stop the
loop with Ctrl+C.

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20130301180227.GA24385@ks398093.ip-192-95-24.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 14:01:26 -03:00
Namhyung Kim d723a55096 perf test: Add test case for checking number of EXIT events
The new test__task_exit() test runs a simple "/usr/bin/true" workload and then
checks whether the number of EXIT event is 1 or not.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/87obeljax4.fsf@sejong.aot.lge.com
[ committer note: Fixup conflicts with f4c66b4 ( bp overflow tests ) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:12 -03:00
Namhyung Kim da522c1703 perf tests: Fixup return path of perf record test case
Add missing perf_evlist__close() function.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363326533-3310-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:12 -03:00
Namhyung Kim 9b5b7cdc51 perf tests: Fixup return path of open-syscall-tp-fields test case
Add missing evlist cleanup functions.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363326533-3310-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:12 -03:00
Namhyung Kim 8fa60e1fba perf record: Fixup return path of cmd_record()
The error path of calling perf_target__parse_uid wrongly went to
out_free_fd.  Also add missing evlist cleanup routines.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363326533-3310-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:11 -03:00
Namhyung Kim 3beb086143 perf trace: Free evlist resources properly on return path
The trace_run() function calls several evlist functions but misses some
pair-wise cleanup routines on return path.  Fix it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363326533-3310-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:11 -03:00
Namhyung Kim a74b4b66cc perf evlist: Introduce perf_evlist__close()
It's a pair of perf_evlist__open().

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363326533-3310-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:10 -03:00
Namhyung Kim 736b05a046 perf evsel: Cleanup perf_evsel__exit()
Use perf_evsel__free_* because they do the same thing and ensures the
pointer has NULL value at the end.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363326533-3310-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:10 -03:00
Jiri Olsa 06933e3a73 perf tests: Test breakpoint overflow signal handler counts
Adding automated test to check the exact number of breakpoint event
overflows and counts.

This test was originally done by Vince Weaver for perf_event_tests.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1362940871-24486-7-git-send-email-jolsa@redhat.com
[ committer note: s/pr_err/pr_debug/g i.e. print just OK or FAILED in non verbose mode ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:10 -03:00
Jiri Olsa 5a6bef47b4 perf tests: Test breakpoint overflow signal handler
Adding automated test for breakpoint event signal handler checking if
it's executed properly.

The test is related to the proper handling of the RF EFLAGS bit on
x86_64, but it's generic for all archs.

First we check the signal handler is properly called and that the
following debug exception return to user space wouldn't trigger
recursive breakpoint.

This is related to x86_64 RF EFLAGS bit being managed in a wrong way.

Second we check that we can set breakpoint in signal handler, which is
not possible on x86_64 if the signal handler is executed with RF EFLAG
set.

This test is inpired by overflow tests done by Vince Weaver.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1362940871-24486-6-git-send-email-jolsa@redhat.com
[ committer note: s/pr_err/pr_debug/g i.e. print just OK or FAILED in non verbose mode ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:10 -03:00
Namhyung Kim 45fa534cff perf tools: Remove duplicated page_size definition
It's defined in util/util.c and gets set from the begining of perf run.
No need to duplicate it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363173585-9754-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:09 -03:00
Namhyung Kim e5f5e5ee78 perf tools: Remove unused macro definitions
They're never used and looks like leftovers from the porting of
trace-cmd code.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363173585-9754-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:09 -03:00
Namhyung Kim 024b13082e perf tools: Remove unnecessary calc_data_size variable
It's not set from anywhere so no need to keep it.  Looks like an
unneeded copy of the same variable in trace-event-read.c

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363173585-9754-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:09 -03:00
Namhyung Kim d301de830d perf tools: Remove unused struct definitions
struct event_list and struct events are never used.

Just get rid of them.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363173585-9754-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:09 -03:00
Namhyung Kim f3ff40ec8d perf tools: Remove unused trace_read_data function
And functions that called only from the trace_read_data().

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363173585-9754-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:08 -03:00
Wei Yongjun db3c6bf811 perf report: Remove duplicated include
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/CAPgLHd9=EXaH1hv4jeVvTa4tZFsjnx+8+g3zqmmUKqQ5qRqTEA@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:08 -03:00
David Ahern ed8996a6d5 perf machine: Move machine__remove_thread and make static
As the now only user, machine__process_exit_event, that is what tools
use to process PERF_RECORD_EXIT events, is on the same object file.

Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1363151248-16674-5-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:08 -03:00
David Ahern c1ad050caa perf session: Remove unused perf_session__remove_thread method
Should have been removed on this changeset, that removed the last user
of it:

  743eb86865

    perf tools: Resolve machine earlier and pass it to perf_event_ops

Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1363151248-16674-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:08 -03:00
David Ahern eba7181d56 perf tools: Remove unused tracing functions
Leftovers from before libtraceevent integration.

Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1363151248-16674-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:07 -03:00
Namhyung Kim 0d7f5b57a4 perf trace: Get rid of a duplicate code
Checking of sample.raw_data is duplicated and seems an artifact of some
git auto merging stuff.  Kill it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363064360-7641-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:07 -03:00
Namhyung Kim c7e7b61013 perf annotate browser: Support event group view on TUI
Dynamically allocate browser_disasm_line according to a number of group
members.  This way we can handle multiple events in a general manner.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/878v5tl2vc.fsf@sejong.aot.lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:07 -03:00
Namhyung Kim d8d7cd93e6 perf annotate/gtk: Support event group view on GTK
Add support for event group view to GTK annotation browser.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362462812-30885-13-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:07 -03:00
Namhyung Kim e64aa75bf5 perf annotate browser: Use disasm__calc_percent()
The disasm_line__calc_percent() which was used by annotate browser code
almost duplicates disasm__calc_percent.  Let's get rid of the code
duplication.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362462812-30885-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:06 -03:00
Namhyung Kim ab77df672c perf annotate browser: Make browser_disasm_line->percent an array
Make percent field of struct browser_disasm_line an array and move it to
the last.  This is a preparation of event group view feature.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362462812-30885-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:06 -03:00
Namhyung Kim 1491c22a5f perf annotate: Support event group view for --print-line
Dynamically allocate source_line_percent according to a number of group
members and save nr_pcnt to the struct source_line.  This way we can
handle multiple events in a general manner.

However since the size of struct source_line is not fixed anymore,
iterating whole source_line should care about its size.

  $ perf annotate --group --stdio --print-line

  Sorted summary for file /lib/ld-2.11.1.so
  ----------------------------------------------
     33.33    0.00 /build/buildd/eglibc-2.11.1/elf/rtld.c:381
     33.33    0.00 /build/buildd/eglibc-2.11.1/elf/dynamic-link.h:128
     33.33    0.00 /build/buildd/eglibc-2.11.1/elf/do-rel.h:105
      0.00   75.00 /build/buildd/eglibc-2.11.1/elf/dynamic-link.h:137
      0.00   25.00 /build/buildd/eglibc-2.11.1/elf/dynamic-link.h:187
  ...

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362462812-30885-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:06 -03:00
Namhyung Kim c5a8368ca6 perf annotate: Factor out struct source_line_percent
The source_line_percent struct contains percentage value of the symbol
histogram.  This is a preparation of event group view change.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362462812-30885-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:06 -03:00
Namhyung Kim 759ff497e0 perf evsel: Introduce perf_evsel__is_group_event() helper
The perf_evsel__is_group_event function is for checking whether given
evsel needs event group view support or not.  Please note that it's
different to the existing perf_evsel__is_group_leader() which checks
only the given evsel is a leader or a standalone (i.e. non-group) event
regardless of event group feature.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362462812-30885-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:05 -03:00
Namhyung Kim b1dd443296 perf annotate: Add basic support to event group view
Add --group option to enable event grouping.  When enabled, all the
group members information will be shown with the leader so skip
non-leader events.

It only supports --stdio output currently.  Later patches will extend
additional features.

 $ perf annotate --group --stdio
 ...
  Percent                 |      Source code & Disassembly of libpthread-2.15.so
 --------------------------------------------------------------------------------
                          :
                          :
                          :
                          :      Disassembly of section .text:
                          :
                          :      000000387dc0aa50 <__pthread_mutex_unlock_usercnt>:
     8.08    2.40    5.29 :        387dc0aa50:   mov    %rdi,%rdx
     0.00    0.00    0.00 :        387dc0aa53:   mov    0x10(%rdi),%edi
     0.00    0.00    0.00 :        387dc0aa56:   mov    %edi,%eax
     0.00    0.80    0.00 :        387dc0aa58:   and    $0x7f,%eax
     3.03    2.40    3.53 :        387dc0aa5b:   test   $0x7c,%dil
     0.00    0.00    0.00 :        387dc0aa5f:   jne    387dc0aaa9 <__pthread_mutex_unlock_use
     0.00    0.00    0.00 :        387dc0aa61:   test   %eax,%eax
     0.00    0.00    0.00 :        387dc0aa63:   jne    387dc0aa85 <__pthread_mutex_unlock_use
     0.00    0.00    0.00 :        387dc0aa65:   and    $0x80,%edi
     0.00    0.00    0.00 :        387dc0aa6b:   test   %esi,%esi
     3.03    5.60    7.06 :        387dc0aa6d:   movl   $0x0,0x8(%rdx)
     0.00    0.00    0.59 :        387dc0aa74:   je     387dc0aa7a <__pthread_mutex_unlock_use
     0.00    0.00    0.00 :        387dc0aa76:   subl   $0x1,0xc(%rdx)
     2.02    5.60    1.18 :        387dc0aa7a:   mov    %edi,%esi
     0.00    0.00    0.00 :        387dc0aa7c:   lock decl (%rdx)
    83.84   83.20   82.35 :        387dc0aa7f:   jne    387dc0aada <_L_unlock_586>
     0.00    0.00    0.00 :        387dc0aa81:   nop
     0.00    0.00    0.00 :        387dc0aa82:   xor    %eax,%eax
     0.00    0.00    0.00 :        387dc0aa84:   retq
 ...

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362462812-30885-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:05 -03:00
Namhyung Kim bd64fcb880 perf annotate: Cleanup disasm__calc_percent()
The loop end condition is calculated from next disasm_line or the symbol
size if it's the last disasm_line.  But it doesn't need to be calculated
at every iteration.  Moving it out of the function can simplify code a
bit.  Also the src_line doesn't need to be checked in every time.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362462812-30885-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:05 -03:00
Namhyung Kim e5ccf9f45d perf annotate: Factor out disasm__calc_percent()
Factor out calculation of histogram of a symbol into
disasm__calc_percent.  It'll be used for later changes.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362462812-30885-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:04 -03:00
Namhyung Kim 3aec150af3 perf annotate: Add a comment on the symbol__parse_objdump_line()
The symbol__parse_objdump_line() parses result of the objdump run but
it's hard to follow if one doesn't know the output format of the
objdump.  Add a head comment on the function to help her.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362462812-30885-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:04 -03:00
Namhyung Kim db8fd07a54 perf annotate: Pass evsel instead of evidx on annotation functions
Pass evsel instead of evidx.  This is a preparation for supporting event
group view in annotation and no functional change is intended.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362462812-30885-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:04 -03:00
Namhyung Kim acf2892270 perf stat: Use perf_evlist__prepare/start_workload()
The perf stat had an open code to the duplicated work.  Use the helper
as it now can be called without struct perf_record_opts.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362987798-24969-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:04 -03:00
Namhyung Kim 55e162ea76 perf evlist: Add want_signal parameter to perf_evlist__prepare_workload()
In case a caller doesn't want to receive SIGUSR1 when the child failed
to exec().

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362987798-24969-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:03 -03:00
Namhyung Kim 119fa3c922 perf evlist: Do not pass struct record_opts to perf_evlist__prepare_workload()
Since it's only used for checking ->pipe_output, we can pass the result
directly.

Now the perf_evlist__prepare_workload() don't have a dependency of
struct perf_record_opts, it can be called from other places like perf
stat.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362987798-24969-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:02 -03:00
Namhyung Kim 6ef73ec449 perf evlist: Pass struct perf_target to perf_evlist__prepare_workload()
It's a preparation step of removing @opts arg from the function so that
it can be used more widely.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362987798-24969-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:02 -03:00
Namhyung Kim b3a319d528 perf evlist: Add thread_map__nr() helper
Introduce and use the thread_map__nr() function to protect a possible
NULL pointer dereference and cleanup the code a bit.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362987798-24969-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:02 -03:00
Namhyung Kim 85397956de perf evlist: Use cpu_map__nr() helper
Use the cpu_map__nr() helper to protect a possible NULL cpu map
dereference.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362987798-24969-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:02 -03:00
Namhyung Kim 334fe7a3c6 perf evlist: Remove cpus and threads arguments from perf_evlist__new()
It's almost always used with NULL for both arguments.  Get rid of the
arguments from the signature and use perf_evlist__set_maps() if needed.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362987798-24969-1-git-send-email-namhyung@kernel.org
[ committer note: replaced spaces with tabs in some of the affected lines ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:01 -03:00
Borislav Petkov b28b130719 tools lib lk: Fix _FORTIFY_SOURCE builds
Jiri Olsa triggers the following build error:

    SUBDIR ../lib/lk/
    CC debugfs.o
In file included from /usr/include/errno.h:29:0,
                 from debugfs.c:1:
/usr/include/features.h:314:4: error: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Werror=cpp]

This is because enabling buffer overflow checks through _FORTIFY_SOURCE
require compiler optimizations to be enabled too. However, those are
not. Enable them by simply copying the perf optimization level. It can
be expanded later if we want to support debug builds, etc.

Signed-off-by: Borislav Petkov <bp@suse.de>
Reported-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1362338733-8718-1-git-send-email-bp@alien8.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:01 -03:00
Borislav Petkov 5a439645ea tools/vm: Switch to liblk library
page-flags.c had some older version of debugfs_mount copied from perf so
convert it to using the version in the tools library.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Link: http://lkml.kernel.org/r/1361374353-30385-8-git-send-email-bp@alien8.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:01 -03:00
Borislav Petkov 1355915ac6 perf tools: Extract perf-specific stuff from debugfs.c
Move them to util.c and simplify code a bit.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1361374353-30385-6-git-send-email-bp@alien8.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:01 -03:00
Borislav Petkov 85c66be101 perf tools: Introduce tools/lib/lk library
This introduces the tools/lib/lk library, that will gradually have the
routines that now are used in tools/perf/ and other tools and that can
be shared.

Start by carving out debugfs routines for general use.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1361374353-30385-5-git-send-email-bp@alien8.de
[ committer note: Add tools/lib/lk/ to perf's MANIFEST so that its tarballs continue to build ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:00 -03:00
Jiri Olsa 9687b89d21 perf tests: Add attr stat -C cpu test
Adding test to validate perf_event_attr data for command:
  'stat -C 0'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1361785972-7431-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:00 -03:00
Jiri Olsa b03ec1b530 perf tests: Add attr record -C cpu test
Adding test to validate perf_event_attr data for command:
  'record -C 0'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1361785972-7431-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:00 -03:00
Jiri Olsa c21d0030cf perf tests: Make attr script test event cpu
Make attr script to check for 'cpu' when testing event properties. This
will allow us to check the '-C X' option for both record and stat
commands.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1361785972-7431-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:06:00 -03:00
Jiri Olsa 097c87582c perf tests: Make attr script verbose friendly
Making the attr test script runner to pass proper verbose option. Also
making single '-v' be more reader friendly and display just the test
name.

Making the current output to be display for '-vv'.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1361785972-7431-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:05:59 -03:00
liguang 66857b5a8b perf tools: Sort command-list.txt alphabetically
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1361851974-25307-1-git-send-email-lig.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:05:59 -03:00
Borislav Petkov 9e4a66482e perf tools: Correct Makefile.include
It looks at O= and adjusts the $(OUTPUT) variable based on what the
output directory will be. However, when O is defined but empty, it
wrongly becomes the user's $HOME dir which is not what we want. So check
it is not empty before working with it further.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1361374353-30385-4-git-send-email-bp@alien8.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:05:59 -03:00
Borislav Petkov a50e433327 perf tools: Honor parallel jobs
We need to hand down parallel build options like the internal make
--jobserver-fds one so that parallel builds can also happen when
building perf from the toplevel directory.

Make it so #1!

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1361374353-30385-3-git-send-email-bp@alien8.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:05:59 -03:00
Borislav Petkov fed1208841 perf tools: Remove a write-only variable in the debugfs code
debugfs_premounted is written-to only so drop it. This functionality is
covered by debugfs_found now. Make it a bool while at it.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1361374353-30385-2-git-send-email-bp@alien8.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:05:58 -03:00
Cody P Schafer 861e10be08 perf tools: Fix build on non-glibc systems due to libio.h absence
Including libio.h causes build failures on uClibc systems (which lack
libio.h).

It appears that libio.h was only included to pull in a definition for
NULL, so it has been replaced by stddef.h.

On powerpc, libio.h was conditionally included, but could be removed
completely as it is unneeded. Also, the included of stdlib.h was changed
to stddef.h (as again, only NULL is needed).

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363300074-26288-1-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-15 13:05:13 -03:00
Len Brown 149c2319c6 tools/power turbostat: additional Haswell CPU-id
There is an additional HSW CPU-id, 0x46,
which has C-states exactly like CPU-id 0x45.

Signed-off-by: Len Brown <len.brown@intel.com>
2013-03-15 11:05:26 -04:00
Vinson Lee d1398ccfec perf tools: Fix LIBNUMA build with glibc 2.12 and older.
The tokens MADV_HUGEPAGE and MADV_NOHUGEPAGE are not available with
glibc 2.12 and older. Define these tokens if they are not already
defined.

This patch fixes these build errors with older versions of glibc.

    CC bench/numa.o
bench/numa.c: In function ‘alloc_data’:
bench/numa.c:334: error: ‘MADV_HUGEPAGE’ undeclared (first use in this function)
bench/numa.c:334: error: (Each undeclared identifier is reported only once
bench/numa.c:334: error: for each function it appears in.)
bench/numa.c:341: error: ‘MADV_NOHUGEPAGE’ undeclared (first use in this function)
make: *** [bench/numa.o] Error 1

Signed-off-by: Vinson Lee <vlee@twitter.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Irina Tirdea <irina.tirdea@intel.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363214064-4671-2-git-send-email-vlee@twitter.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-14 08:06:21 -03:00
Linus Torvalds ad8395e149 USB fixes for 3.9-rc2
Here are a number of tiny USB fixes and new USB device ids for your 3.9
 tree.
 
 The "largest" one here is a revert of a usb-storage patch that turned
 out to be incorrect, breaking existing users, which is never a good
 thing.  Everything else is pretty simple and small
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlFA3rgACgkQMUfUDdst+ylSmQCfdQGXwi/1JX0099FKsnt4dcXY
 SbMAn1GWSwYPo1Uk5joKJpNh412PMnXZ
 =kNF7
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of tiny USB fixes and new USB device ids for your
  3.9 tree.

  The "largest" one here is a revert of a usb-storage patch that turned
  out to be incorrect, breaking existing users, which is never a good
  thing.  Everything else is pretty simple and small"

* tag 'usb-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits)
  USB: quatech2: only write to the tty if the port is open.
  qcserial: bind to DM/DIAG port on Gobi 1K devices
  USB: cdc-wdm: fix buffer overflow
  usb: serial: Add Rigblaster Advantage to device table
  qcaux: add Franklin U600
  usb: musb: core: fix possible build error with randconfig
  usb: cp210x new Vendor/Device IDs
  usb: gadget: pxa25x: fix disconnect reporting
  usb: dwc3: ep0: fix sparc64 build
  usb: c67x00 RetryCnt value in c67x00 TD should be 3
  usb: Correction to c67x00 TD data length mask
  usb: Makefile: fix drivers/usb/phy/ Makefile entry
  USB: added support for Cinterion's products AH6 and PLS8
  usb: gadget: fix omap_udc build errors
  USB: storage: fix Huawei mode switching regression
  USB: storage: in-kernel modeswitching is deprecated
  tools: usb: ffs-test: Fix build failure
  USB: option: add Huawei E5331
  usb: musb: omap2430: fix sparse warning
  usb: musb: omap2430: fix omap_musb_mailbox glue check again
  ...
2013-03-13 15:03:48 -07:00
Ananth N Mavinakayanahalli 79146a69c8 perf probe: Fix segfault
Fix segfault in perf probe due to a bug introduced by commit d8639f068
(perf tools: Stop using 'self' in strlist).

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20130312090217.GC4668@in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-13 17:00:33 -03:00
Jack Mitchell b9e8c37220 libtraceevent: Remove hard coded include to /usr/local/include in Makefile
having /usr/local/include hardcoded into the makefile is not necessary
as this is automatically included by GCC. It also infects cross-compile
builds with the host systems includes.

Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362741712-21308-1-git-send-email-ml@communistcode.co.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-13 17:00:00 -03:00
Jiri Olsa e4dd45fe7a perf record: Fix -C option
Currently the -C option does not work for record command, because of the
targets mismatch when synthesizing threads.

Fixing this by using proper target interface for the synthesize
decision.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1361785972-7431-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-13 16:58:28 -03:00
Marcin Slusarz d2f32479e5 perf tools: check if -DFORTIFY_SOURCE=2 is allowed
It seems gcc (4.7.2) defines _FORTIFY_SOURCE internally and becomes
confused when it sees another definition in flags.

For me, build failed like this:

CHK glibc
Makefile:548: *** No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static. Stop.

and only with V=1 it printed:

<command-line>:0:0: error: "_FORTIFY_SOURCE" redefined [-Werror]
<stdin>:1:0: note: this is the location of the previous definition

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1361113416-8662-1-git-send-email-marcin.slusarz@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-13 16:57:27 -03:00
Michael Ellerman 5f7439e078 perf report: Fix build with NO_NEWT=1
Commit ad0de09 "Enable the runtime switching of perf data file" broke
the build with NO_NEWT=1:

    CC builtin-report.o
builtin-report.c: In function '__cmd_report':
builtin-report.c:479:15: error: 'K_SWITCH_INPUT_DATA' undeclared (first use in this function)
builtin-report.c:479:15: note: each undeclared identifier is reported only once for each function it appears in
builtin-report.c: In function 'cmd_report':
builtin-report.c:823:13: error: 'K_SWITCH_INPUT_DATA' undeclared (first use in this function)
make: *** [builtin-report.o] Error 1

Fix it by adding a dummy definition of K_SWITCH_INPUT_DATA.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1361854923-1814-2-git-send-email-michael@ellerman.id.au
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-13 16:55:17 -03:00
Michael Ellerman 1e825efb57 perf annotate: Fix build with NO_NEWT=1
Commit 18c9e5c "Make it to be able to skip unannotatable symbols" broke
the build with NO_NEWT=1:

   CC builtin-annotate.o
builtin-annotate.c: In function 'hists__find_annotations':
builtin-annotate.c:161:4: error: duplicate case value
builtin-annotate.c:154:4: error: previously used here
make: *** [builtin-annotate.o] Error 1

This is because without NEWT support K_LEFT is #defined to -1 in
utils/hist.h

Fix it by shifting the K_LEFT/K_RIGHT #defines out of the likely range
of error values.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1361854923-1814-1-git-send-email-michael@ellerman.id.au
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-03-13 16:54:49 -03:00
Steven Rostedt (Red Hat) 752d96657c ktest: Allow tests to use different GRUB_MENUs
To save connecting and searching for a given grub menu for each test,
ktest.pl will cache the grub number it found. The problem is that
different tests might use a different grub menu, but ktest.pl will
ignore it.

Instead, have ktest.pl check if the grub menu it used to cache the
content is the same as when it grabbed the menu. If not, grab it again,
otherwise just return the cached value.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-08 09:33:35 -05:00
Maxin B. John a0f11aceee tools: usb: ffs-test: Fix build failure
Fixes this build failure:
gcc -Wall -Wextra -g -lpthread -I../include -o testusb testusb.c
gcc -Wall -Wextra -g -lpthread -I../include -o ffs-test ffs-test.c
In file included from ffs-test.c:41:0:
../../include/linux/usb/functionfs.h:4:39: fatal error:
uapi/linux/usb/functionfs.h: No such file or directory
compilation terminated.
make: *** [ffs-test] Error 1

Signed-off-by: Maxin B. John <maxin.john@enea.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: stable <stable@vger.kernel.org>  # 3.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-07 12:23:17 +08:00
Wanlong Gao 289d1054e9 lguest: fix paths in comments
After commit 07fe997, lguest tool has already moved from
Documentation/virtual/lguest/ to tools/lguest/.

Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-03-07 09:56:46 +11:00
Matt Fleming 123abd76ed efivars: efivarfs_valid_name() should handle pstore syntax
Stricter validation was introduced with commit da27a24383
("efivarfs: guid part of filenames are case-insensitive") and commit
47f531e8ba ("efivarfs: Validate filenames much more aggressively"),
which is necessary for the guid portion of efivarfs filenames, but we
don't need to be so strict with the first part, the variable name. The
UEFI specification doesn't impose any constraints on variable names
other than they be a NULL-terminated string.

The above commits caused a regression that resulted in users seeing
the following message,

  $ sudo mount -v /sys/firmware/efi/efivars mount: Cannot allocate memory

whenever pstore EFI variables were present in the variable store,
since their variable names failed to pass the following check,

    /* GUID should be right after the first '-' */
    if (s - 1 != strchr(str, '-'))

as a typical pstore filename is of the form, dump-type0-10-1-<guid>.
The fix is trivial since the guid portion of the filename is GUID_LEN
bytes, we can use (len - GUID_LEN) to ensure the '-' character is
where we expect it to be.

(The bogus ENOMEM error value will be fixed in a separate patch.)

Reported-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Joseph Yasi <joe.yasi@gmail.com>
Reported-by: Lingzhu Xiang <lxiang@redhat.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: <stable@vger.kernel.org> # v3.8
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-03-06 14:46:04 +00:00
Linus Torvalds 8fd5e7a2d9 ImgTec Meta architecture changes for v3.9-rc1
This adds core architecture support for Imagination's Meta processor
 cores, followed by some later miscellaneous arch/metag cleanups and
 fixes which I kept separate to ease review:
 
  - Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
  - A few fixes all over, particularly for symbol prefixes
  - A few privilege protection fixes
  - Several cleanups (setup.c includes, split out a lot of metag_ksyms.c)
  - Fix some missing exports
  - Convert hugetlb to use vm_unmapped_area()
  - Copy device tree to non-init memory
  - Provide dma_get_sgtable()
 
 Signed-off-by: James Hogan <james.hogan@imgtec.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJRMmVXAAoJEKHZs+irPybfivgP/inEXqJyfw59omQdjwvYcU/a
 /u0MJ3UKSNS3U+HknfaFCy/Nwk1dqPLjqqyVC1V6AbUPBXlaEwGcimlNRx2uRjdq
 Uh96upMLHsNuF/xiiR477g3RwY0egIJdM1R1bGi3mZ3vVrNQGF+wbni6f61xCWGz
 M/4rDglpQvE79oLhYdgj6tidZtHQT0YWtERA9W90zkQWXGYmpFPKBKbfZAi5+rKQ
 U6Gpg26orUugzXNaxltJEYKE8gjLTppEabx8DARnItZ4zCMy4dw5RBJ35RFvQw6e
 eSmfgTy9w9WqBMY2+QMSgU0KQt1IITCzX7OlOXC0jALQJXoU0WWbOELlBVQLCwF1
 T0OcR/5ZP/hIlOk5Dh+e9U3AtbASXdMtqA0ZUe78woH1CBf7Nc/0c0vRg23EdMh8
 lnHDJxT/UqskoOYLI4kgWbEdLDy4uTh19U2pVi7VCo7ksLB9Bj9Xc8VSKgscSXTl
 OwzN+c4Jgtu8FDFTp+Af4AT8pYGJ08j8L2ErsV2sOv3Q44U5WXdrMz3GSgwXj8+4
 wZk3HvdkQVkMD5sJCUZgAswaN6BnbB0pHdCz4wMQ8jR/Ogs015Ipk64Ecym9S/4n
 uES7PnDtt/4lb5EyX2ScbvdnZTAFTaaP7OOhC77BOQvbQjIW1tkAcxWJqRry86uS
 iM0BFgK6Ohx3geqa5Ft0
 =65cR
 -----END PGP SIGNATURE-----

Merge tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag

Pull new ImgTec Meta architecture from James Hogan:
 "This adds core architecture support for Imagination's Meta processor
  cores, followed by some later miscellaneous arch/metag cleanups and
  fixes which I kept separate to ease review:

   - Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
   - A few fixes all over, particularly for symbol prefixes
   - A few privilege protection fixes
   - Several cleanups (setup.c includes, split out a lot of
     metag_ksyms.c)
   - Fix some missing exports
   - Convert hugetlb to use vm_unmapped_area()
   - Copy device tree to non-init memory
   - Provide dma_get_sgtable()"

* tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits)
  metag: Provide dma_get_sgtable()
  metag: prom.h: remove declaration of metag_dt_memblock_reserve()
  metag: copy devicetree to non-init memory
  metag: cleanup metag_ksyms.c includes
  metag: move mm/init.c exports out of metag_ksyms.c
  metag: move usercopy.c exports out of metag_ksyms.c
  metag: move setup.c exports out of metag_ksyms.c
  metag: move kick.c exports out of metag_ksyms.c
  metag: move traps.c exports out of metag_ksyms.c
  metag: move irq enable out of irqflags.h on SMP
  genksyms: fix metag symbol prefix on crc symbols
  metag: hugetlb: convert to vm_unmapped_area()
  metag: export clear_page and copy_page
  metag: export metag_code_cache_flush_all
  metag: protect more non-MMU memory regions
  metag: make TXPRIVEXT bits explicit
  metag: kernel/setup.c: sort includes
  perf: Enable building perf tools for Meta
  metag: add boot time LNKGET/LNKSET check
  metag: add __init to metag_cache_probe()
  ...
2013-03-03 12:06:09 -08:00
James Hogan 1bea5b8188 perf: Enable building perf tools for Meta
Define rmb(), cpu_relax(), and CPUINFO_PROC for Meta so that the perf
tools can be built for Meta.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2013-03-02 20:09:57 +00:00
Linus Torvalds e23b62256a Initial ARC Linux port with some fixes on top for 3.9-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRMZYbAAoJEGnX8d3iisJeFj8P/R1hWohDDUc8pG3+ov9Y2Brt
 g7oIVw1udlKIk3HhVwsyT14/UHunfcTCONKKKGmmbfRrLJSMMsSlXvYoAQLozokf
 TuaO3Xt5IfERROqTrCDSwdNaAmwIZGsIuI9jWKo4qsXovAL0nc3sR527qMI1o7OE
 9X5eIqOJ/rPvOjXYrPqXmvO/DZKYG8PNTH4PYqePes31CsAmDXWBIlgYmgvF3th3
 ptwKPgRU/c2wKNpDDJXVQg/bcg9NI2cCnndNrjgXZgyUQrC37ZTdt/IOF5w6FgIW
 6i6UbDKXn8MgQAhrXx0Ns/+0kSJZ7eBWmj8hLyrxUzOYlF4rCs/il6ofDRaMO6fv
 9LmbNZXYnGICzm1YAxZRK7dm13IbDnltmMc81vISBpJSMTBgqzLWobHnq5/67Wh4
 2oUkoc2Tfaw70FnRCewX0x4Qop2YXmXl1KBwdecvzdcKi6Yg+rRH08ur/0yyCyx7
 +vAQpPVIuVqCc916qwmCPFaf1UMNnmMStxNH7D1AQHvi1G372NxfXizdYyKFRY9N
 f5Q+6DTo1xh2AxuGieSZxBoeK0Rlp4DWTOBD4MMz29y7BRX7LK1U2iS+nW0g8uir
 3RdYeAqyCxlJtjJNQX9U8ZT54jUPZgvJWU0udesRN1CBdOSQMjM9OyZsLLRtLeX1
 ww2tc7zqhBUyjBej6Itg
 =NKkW
 -----END PGP SIGNATURE-----

Merge tag 'arc-v3.9-rc1-late' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull new ARC architecture from Vineet Gupta:
 "Initial ARC Linux port with some fixes on top for 3.9-rc1:

  I would like to introduce the Linux port to ARC Processors (from
  Synopsys) for 3.9-rc1.  The patch-set has been discussed on the public
  lists since Nov and has received a fair bit of review, specially from
  Arnd, tglx, Al and other subsystem maintainers for DeviceTree, kgdb...

  The arch bits are in arch/arc, some asm-generic changes (acked by
  Arnd), a minor change to PARISC (acked by Helge).

  The series is a touch bigger for a new port for 2 main reasons:

   1. It enables a basic kernel in first sub-series and adds
      ptrace/kgdb/.. later

   2. Some of the fallout of review (DeviceTree support, multi-platform-
      image support) were added on top of orig series, primarily to
      record the revision history.

  This updated pull request additionally contains

   - fixes due to our GNU tools catching up with the new syscall/ptrace
     ABI

   - some (minor) cross-arch Kconfig updates."

* tag 'arc-v3.9-rc1-late' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (82 commits)
  ARC: split elf.h into uapi and export it for userspace
  ARC: Fixup the current ABI version
  ARC: gdbserver using regset interface possibly broken
  ARC: Kconfig cleanup tracking cross-arch Kconfig pruning in merge window
  ARC: make a copy of flat DT
  ARC: [plat-arcfpga] DT arc-uart bindings change: "baud" => "current-speed"
  ARC: Ensure CONFIG_VIRT_TO_BUS is not enabled
  ARC: Fix pt_orig_r8 access
  ARC: [3.9] Fallout of hlist iterator update
  ARC: 64bit RTSC timestamp hardware issue
  ARC: Don't fiddle with non-existent caches
  ARC: Add self to MAINTAINERS
  ARC: Provide a default serial.h for uart drivers needing BASE_BAUD
  ARC: [plat-arcfpga] defconfig for fully loaded ARC Linux
  ARC: [Review] Multi-platform image #8: platform registers SMP callbacks
  ARC: [Review] Multi-platform image #7: SMP common code to use callbacks
  ARC: [Review] Multi-platform image #6: cpu-to-dma-addr optional
  ARC: [Review] Multi-platform image #5: NR_IRQS defined by ARC core
  ARC: [Review] Multi-platform image #4: Isolate platform headers
  ARC: [Review] Multi-platform image #3: switch to board callback
  ...
2013-03-02 07:58:56 -08:00
Sasha Levin b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Jeremy Kerr 80d0342859 selftests: add a simple doc
This change adds a little documentation to the tests under
tools/testing/selftests/, based on akpm's explanation.

[akpm@linux-foundation.org: move from Documentation to tools/testing/selftests/README.txt]
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Andrew Morton 66a01b9659 tools/testing/selftests/Makefile: rearrange targets
Do it one-per-line to reduce patch conflict pain.

Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Jeremy Kerr d974f67a52 selftests/efivarfs: add create-read test
Test that reads from a newly-created efivarfs file (with no data written)
will return EOF.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Lingzhu Xiang <lxiang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Jeremy Kerr 033a1a7fe7 selftests/efivarfs: add empty file creation test
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Lingzhu Xiang <lxiang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Jeremy Kerr 455ce1c721 selftests: add tests for efivarfs
This change adds a few initial efivarfs tests to the
tools/testing/selftests directory.

The open-unlink test is based on code from Lingzhu Xiang.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Lingzhu Xiang <lxiang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Linus Torvalds c69d0a15d2 ktest update for 3.9
Added ability to have all builds test warnings.
 
 Fixed failing reboot when the reboot produces a non fatal error.
 
 Config reading fixes and other cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJRJEuRAAoJEOdOSU1xswtMXb8H/2zQDW4VAzJee4BQJohrIfSW
 rpBIx8inOTPcmyFvJRpP2k+pCdaBnVah3K8tiOlTDWctl1kJzQP9e+Vep7BBuId4
 Ujv844j8JFO5V2yv5V7xLofev9zFZ/cEZCns2Z1CL9kMFvu3sSoA/0hZ8JobOe0V
 IeHdNBEZuyS2J7wWjo646SSVUH9FEMGqYretIDk90Sv86p5QQEyATZzh6j+hr964
 PZSUYn/NeTTHLeml6oXgRJ7lRPszKJlrQEj8xTOkgm07NznNduqCx33/H4kJnnzf
 G98TVVotKWHlVpEI4nAC5fpRLNsmulH6kHajjqiMLqkSQ+yfzSLAGjI6CWCKUyg=
 =HvSU
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest update from Steven Rostedt:
 "Added ability to have all builds test warnings.

  Fixed failing reboot when the reboot produces a non fatal error.

  Config reading fixes and other cleanups"

* tag 'ktest-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Remove indexes from warnings check
  ktest: Ignore warnings during reboot
  ktest: Search for linux banner for successful reboot
  ktest: Add make_warnings_file and process full warnings
  ktest: Allow a test option to use its default option
  ktest: Strip off '\n' when reading which files were modified
  ktest: Do not require CONSOLE for build or install bisects
2013-02-25 15:43:21 -08:00
Linus Torvalds 7ed214ac20 Char/Misc driver patches for 3.9-rc1
Here's the big char/misc driver patches for 3.9-rc1.
 
 Nothing major here, just lots of different driver updates (mei, hyperv, ipack,
 extcon, vmci, etc.).
 
 All of these have been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmZJgACgkQMUfUDdst+ymhZgCgo2dn37r9uMCwgTSpxSq92Je5
 x8kAnRF1UnD6ZvySRIlLUBV5LW1YgFnK
 =i5HH
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver patches from Greg Kroah-Hartman:
 "Here's the big char/misc driver patches for 3.9-rc1.

  Nothing major here, just lots of different driver updates (mei,
  hyperv, ipack, extcon, vmci, etc.).

  All of these have been in the linux-next tree for a while."

* tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits)
  w1: w1_therm: Add force-pullup option for "broken" sensors
  w1: ds2482: Added 1-Wire pull-up support to the driver
  vme: add missing put_device() after device_register() fails
  extcon: max8997: Use workqueue to check cable state after completing boot of platform
  extcon: max8997: Set default UART/USB path on probe
  extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type
  extcon: max8997: Set default of ADC debounce time during initialization
  extcon: max8997: Remove duplicate code related to set H/W line path
  extcon: max8997: Move defined constant to header file
  extcon: max77693: Make max77693_extcon_cable static
  extcon: max8997: Remove unreachable code
  extcon: max8997: Make max8997_extcon_cable static
  extcon: max77693: Remove unnecessary goto statement to improve readability
  extcon: max77693: Convert to devm_input_allocate_device()
  extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style
  CREDITS: update email and address of Harald Hoyer
  extcon: arizona: Use MICDET for final microphone identification
  extcon: arizona: Always take the first HPDET reading as the final one
  extcon: arizona: Clear _trig_sts bits after jack detection
  extcon: arizona: Don't HPDET magic when headphones are enabled
  ...
2013-02-21 13:57:13 -08:00
Linus Torvalds 74e1a2a393 USB patches for 3.9-rc1
Here's the big USB merge for 3.9-rc1
 
 Nothing major, lots of gadget fixes, and of course, xhci stuff.
 
 All of this has been in linux-next for a while, with the exception of
 the last 3 patches, which were reverts of patches in the tree that
 caused problems, they went in yesterday.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmZ/kACgkQMUfUDdst+ylEhwCgyM0JEOgLuW7M8D+oNcitZn51
 g7oAniD0IkLG8RCB8plLj+82AvthalCo
 =bHSs
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB merge for 3.9-rc1

  Nothing major, lots of gadget fixes, and of course, xhci stuff.

  All of this has been in linux-next for a while, with the exception of
  the last 3 patches, which were reverts of patches in the tree that
  caused problems, they went in yesterday."

* tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (190 commits)
  Revert "USB: EHCI: make ehci-vt8500 a separate driver"
  Revert "USB: EHCI: make ehci-orion a separate driver"
  Revert "USB: update host controller Kconfig entries"
  USB: update host controller Kconfig entries
  USB: EHCI: make ehci-orion a separate driver
  USB: EHCI: make ehci-vt8500 a separate driver
  USB: usb-storage: unusual_devs update for Super TOP SATA bridge
  USB: ehci-omap: Fix autoloading of module
  USB: ehci-omap: Don't free gpios that we didn't request
  USB: option: add Huawei "ACM" devices using protocol = vendor
  USB: serial: fix null-pointer dereferences on disconnect
  USB: option: add Yota / Megafon M100-1 4g modem
  drivers/usb: add missing GENERIC_HARDIRQS dependencies
  USB: storage: properly handle the endian issues of idProduct
  testusb: remove all mentions of 'usbfs'
  usb: gadget: imx_udc: make it depend on BROKEN
  usb: omap_control_usb: fix compile warning
  ARM: OMAP: USB: Add phy binding information
  ARM: OMAP2: MUSB: Specify omap4 has mailbox
  ARM: OMAP: devices: create device for usb part of control module
  ...
2013-02-21 12:20:00 -08:00
Linus Torvalds 06991c28f3 Driver core patches for 3.9-rc1
Here is the big driver core merge for 3.9-rc1
 
 There are two major series here, both of which touch lots of drivers all
 over the kernel, and will cause you some merge conflicts:
   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.
   - remove CONFIG_EXPERIMENTAL
 
 If you need me to provide a merged tree to handle these resolutions,
 please let me know.
 
 Other than those patches, there's not much here, some minor fixes and
 updates.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
 weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
 =yWAQ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...
2013-02-21 12:05:51 -08:00
Linus Torvalds 8793422fd9 ACPI and power management updates for 3.9-rc1
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
   with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
   Toshi Kani, and Yinghai Lu.
 
 - ACPI power resources handling and ACPI device PM update from
   Rafael J. Wysocki.
 
 - ACPICA update to version 20130117 from Bob Moore and Lv Zheng
   with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and
   Tim Gardner.
 
 - Support for Intel Lynxpoint LPSS from Mika Westerberg.
 
 - cpuidle update from Len Brown including Intel Haswell support, C1
   state for intel_idle, removal of global pm_idle.
 
 - cpuidle fixes and cleanups from Daniel Lezcano.
 
 - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri
   with contributions from Stratos Karafotis and Rickard Andersson.
 
 - Intel P-states driver for Sandy Bridge processors from
   Dirk Brandewie.
 
 - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
 
 - cpufreq fixes related to ordering issues between acpi-cpufreq and
   powernow-k8 from Borislav Petkov and Matthew Garrett.
 
 - cpufreq support for Calxeda Highbank processors from Mark Langsdorf
   and Rob Herring.
 
 - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
   from Shawn Guo.
 
 - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
   and Inderpal Singh.
 
 - Support for "lightweight suspend" from Zhang Rui.
 
 - Removal of the deprecated power trace API from Paul Gortmaker.
 
 - Assorted updates from Andreas Fleig, Colin Ian King,
   Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei,
   Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo,
   Thomas Renninger, and Yasuaki Ishimatsu.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRIsArAAoJEKhOf7ml8uNsD6MP/j7C4NA+GTq6RdwoJt+Yki0K
 9Ep8I4pEuRFoN/oskv24EyQhpGJIk6UxWcJ/DWFBc+1VhmKORta7k2Idv/wlJA77
 s7AcDveA9xcDh+TVfbh87TeuiMSXiSdDZbiaQO+wMizWJAF3F84AnjiAqqqyQcSK
 bA5/Siz/vWlt9PyYDaQtHTVE4lpvPuVcQdYewsdaH2PsmUjvIg/TUzg28CTrdyvv
 eHOdBK9R0/OLQLhzRbL0VOGJ//wEl+HJRO0QEhTKPgdQ1e/VH/4Zu5WSzF8P/x4C
 s2f8U4IKQqulDuDHXtpMpelFm7hRWgsOqZLkcyXLs+0dvSM9CTPO6P0ZaImxUctk
 5daHWEsXUnCErDQawt1mcZP8l6qnxofMQIfLXyPVzvlSnHyToTmrtXa1v2u4AuL/
 hOo4MYWsFNUmRdtGFFGlExGgEDZ4G5NwiYjRBl/6XJ3v4nhnnMbuzxP8scpoe5m1
 8tjroJHZFUUs/mFU/H+oRbHzSzXPmp1sddNaTg4OpVmTn3DDh6ljnFhiItd1Ndw0
 5ldVbSe6ETq5RoK0TbzvQOeVpa9F3JfqbrXLQPqfd2iz/No41LQYG1uShRYuXKuA
 wfEcc+c9VMd3FILu05pGwBnU8VS9VbxTYMz7xDxg6b29Ywnb7u+Q1ycCk2gFYtkS
 E2oZDuyewTJxaskzYsNr
 =wijn
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:

 - Rework of the ACPI namespace scanning code from Rafael J.  Wysocki
   with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
   Toshi Kani, and Yinghai Lu.

 - ACPI power resources handling and ACPI device PM update from Rafael
   J Wysocki.

 - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with
   contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner.

 - Support for Intel Lynxpoint LPSS from Mika Westerberg.

 - cpuidle update from Len Brown including Intel Haswell support, C1
   state for intel_idle, removal of global pm_idle.

 - cpuidle fixes and cleanups from Daniel Lezcano.

 - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with
   contributions from Stratos Karafotis and Rickard Andersson.

 - Intel P-states driver for Sandy Bridge processors from Dirk
   Brandewie.

 - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.

 - cpufreq fixes related to ordering issues between acpi-cpufreq and
   powernow-k8 from Borislav Petkov and Matthew Garrett.

 - cpufreq support for Calxeda Highbank processors from Mark Langsdorf
   and Rob Herring.

 - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
   from Shawn Guo.

 - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
   and Inderpal Singh.

 - Support for "lightweight suspend" from Zhang Rui.

 - Removal of the deprecated power trace API from Paul Gortmaker.

 - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso,
   Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu,
   Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki
   Ishimatsu.

* tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits)
  PM idle: remove global declaration of pm_idle
  unicore32 idle: delete stray pm_idle comment
  openrisc idle: delete pm_idle
  mn10300 idle: delete pm_idle
  microblaze idle: delete pm_idle
  m32r idle: delete pm_idle, and other dead idle code
  ia64 idle: delete pm_idle
  cris idle: delete idle and pm_idle
  ARM64 idle: delete pm_idle
  ARM idle: delete pm_idle
  blackfin idle: delete pm_idle
  sparc idle: rename pm_idle to sparc_idle
  sh idle: rename global pm_idle to static sh_idle
  x86 idle: rename global pm_idle to static x86_idle
  APM idle: register apm_cpu_idle via cpuidle
  cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
  cpufreq / intel_pstate: Change to disallow module build
  tools/power turbostat: display SMI count by default
  intel_idle: export both C1 and C1E
  ACPI / hotplug: Fix concurrency issues and memory leaks
  ...
2013-02-20 11:26:56 -08:00
Linus Torvalds 502b24c23b Merge branch 'for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup changes from Tejun Heo:
 "Nothing too drastic.

   - Removal of synchronize_rcu() from userland visible paths.

   - Various fixes and cleanups from Li.

   - cgroup_rightmost_descendant() added which will be used by cpuset
     changes (it will be a separate pull request)."

* 'for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: fail if monitored file and event_control are in different cgroup
  cgroup: fix cgroup_rmdir() vs close(eventfd) race
  cpuset: fix cpuset_print_task_mems_allowed() vs rename() race
  cgroup: fix exit() vs rmdir() race
  cgroup: remove bogus comments in cgroup_diput()
  cgroup: remove synchronize_rcu() from cgroup_diput()
  cgroup: remove duplicate RCU free on struct cgroup
  sched: remove redundant NULL cgroup check in task_group_path()
  sched: split out css_online/css_offline from tg creation/destruction
  cgroup: initialize cgrp->dentry before css_alloc()
  cgroup: remove a NULL check in cgroup_exit()
  cgroup: fix bogus kernel warnings when cgroup_create() failed
  cgroup: remove synchronize_rcu() from rebind_subsystems()
  cgroup: remove synchronize_rcu() from cgroup_attach_{task|proc}()
  cgroup: use new hashtable implementation
  cgroups: fix cgroup_event_listener error handling
  cgroups: move cgroup_event_listener.c to tools/cgroup
  cgroup: implement cgroup_rightmost_descendant()
  cgroup: remove unused dummy cgroup_fork_callbacks()
2013-02-20 09:16:21 -08:00
Linus Torvalds 8f55cea410 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf changes from Ingo Molnar:
 "There are lots of improvements, the biggest changes are:

  Main kernel side changes:

   - Improve uprobes performance by adding 'pre-filtering' support, by
     Oleg Nesterov.

   - Make some POWER7 events available in sysfs, equivalent to what was
     done on x86, from Sukadev Bhattiprolu.

   - tracing updates by Steve Rostedt - mostly misc fixes and smaller
     improvements.

   - Use perf/event tracing to report PCI Express advanced errors, by
     Tony Luck.

   - Enable northbridge performance counters on AMD family 15h, by Jacob
     Shin.

   - This tracing commit:

        tracing: Remove the extra 4 bytes of padding in events

     changes the ABI.  All involved parties (PowerTop in particular)
     seem to agree that it's safe to do now with the introduction of
     libtraceevent, but the devil is in the details ...

  Main tooling side changes:

   - Add 'event group view', from Namyung Kim:

     To use it, 'perf record' should group events when recording.  And
     then perf report parses the saved group relation from file header
     and prints them together if --group option is provided.  You can
     use the 'perf evlist' command to see event group information:

        $ perf record -e '{ref-cycles,cycles}' noploop 1
        [ perf record: Woken up 2 times to write data ]
        [ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ]

        $ perf evlist --group
        {ref-cycles,cycles}

     With this example, default perf report will show you each event
     separately.

     You can use --group option to enable event group view:

        $ perf report --group
        ...
        # group: {ref-cycles,cycles}
        # ========
        # Samples: 7K of event 'anon group { ref-cycles, cycles }'
        # Event count (approx.): 6876107743
        #
        #         Overhead  Command      Shared Object                      Symbol
        # ................  .......  .................  ..........................
            99.84%  99.76%  noploop  noploop            [.] main
             0.07%   0.00%  noploop  ld-2.15.so         [.] strcmp
             0.03%   0.00%  noploop  [kernel.kallsyms]  [k] timerqueue_del
             0.03%   0.03%  noploop  [kernel.kallsyms]  [k] sched_clock_cpu
             0.02%   0.00%  noploop  [kernel.kallsyms]  [k] account_user_time
             0.01%   0.00%  noploop  [kernel.kallsyms]  [k] __alloc_pages_nodemask
             0.00%   0.00%  noploop  [kernel.kallsyms]  [k] native_write_msr_safe
             0.00%   0.11%  noploop  [kernel.kallsyms]  [k] _raw_spin_lock
             0.00%   0.06%  noploop  [kernel.kallsyms]  [k] find_get_page
             0.00%   0.02%  noploop  [kernel.kallsyms]  [k] rcu_check_callbacks
             0.00%   0.02%  noploop  [kernel.kallsyms]  [k] __current_kernel_time

     As you can see the Overhead column now contains both of ref-cycles
     and cycles and header line shows group information also - 'anon
     group { ref-cycles, cycles }'.  The output is sorted by period of
     group leader first.

   - Initial GTK+ annotate browser, from Namhyung Kim.

   - Add option for runtime switching perf data file in perf report,
     just press 's' and a menu with the valid files found in the current
     directory will be presented, from Feng Tang.

   - Add support to display whole group data for raw columns, from Jiri
     Olsa.

   - Add per processor socket count aggregation in perf stat, from
     Stephane Eranian.

   - Add interval printing in 'perf stat', from Stephane Eranian.

   - 'perf test' improvements

   - Add support for wildcards in tracepoint system name, from Jiri
     Olsa.

   - Add anonymous huge page recognition, from Joshua Zhu.

   - perf build-id cache now can show DSOs present in a perf.data file
     that are not in the cache, to integrate with build-id servers being
     put in place by organizations such as Fedora.

   - perf top now shares more of the evsel config/creation routines with
     'record', paving the way for further integration like 'top'
     snapshots, etc.

   - perf top now supports DWARF callchains.

   - Fix mmap limitations on 32-bit, fix from David Miller.

   - 'perf bench numa mem' NUMA performance measurement suite

   - ... and lots of fixes, performance improvements, cleanups and other
     improvements I failed to list - see the shortlog and git log for
     details."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits)
  perf/x86/amd: Enable northbridge performance counters on AMD family 15h
  perf/hwbp: Fix cleanup in case of kzalloc failure
  perf tools: Fix build with bison 2.3 and older.
  perf tools: Limit unwind support to x86 archs
  perf annotate: Make it to be able to skip unannotatable symbols
  perf gtk/annotate: Fail early if it can't annotate
  perf gtk/annotate: Show source lines with gray color
  perf gtk/annotate: Support multiple event annotation
  perf ui/gtk: Implement basic GTK2 annotation browser
  perf annotate: Fix warning message on a missing vmlinux
  perf buildid-cache: Add --update option
  uprobes/perf: Avoid uprobe_apply() whenever possible
  uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE
  uprobes/perf: Teach trace_uprobe/perf code to pre-filter
  uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's
  uprobes: Introduce uprobe_apply()
  perf: Introduce hw_perf_event->tp_target and ->tp_list
  uprobes/perf: Always increment trace_uprobe->nhit
  uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe
  uprobes/tracing: Introduce is_trace_uprobe_enabled()
  ...
2013-02-19 17:49:41 -08:00
Rafael J. Wysocki 10baf04e95 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (35 commits)
  PM idle: remove global declaration of pm_idle
  unicore32 idle: delete stray pm_idle comment
  openrisc idle: delete pm_idle
  mn10300 idle: delete pm_idle
  microblaze idle: delete pm_idle
  m32r idle: delete pm_idle, and other dead idle code
  ia64 idle: delete pm_idle
  cris idle: delete idle and pm_idle
  ARM64 idle: delete pm_idle
  ARM idle: delete pm_idle
  blackfin idle: delete pm_idle
  sparc idle: rename pm_idle to sparc_idle
  sh idle: rename global pm_idle to static sh_idle
  x86 idle: rename global pm_idle to static x86_idle
  APM idle: register apm_cpu_idle via cpuidle
  tools/power turbostat: display SMI count by default
  intel_idle: export both C1 and C1E
  cpuidle: remove vestage definition of cpuidle_state_usage.driver_data
  x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok flag
  x86 idle: remove mwait_idle() and "idle=mwait" cmdline param
  ...

Conflicts:
	arch/x86/kernel/process.c (with PM / tracing commit 43720bd)
	drivers/acpi/processor_idle.c (with ACPICA commit 4f84291)
2013-02-18 22:34:11 +01:00
Steven Rostedt (Red Hat) 7328735cbf ktest: Remove indexes from warnings check
The index of a line where a warning is tested can be returned
differently on different versions of gcc (or same version compiled
differently). That is, a tab + space can give different results. This
causes the warning check to produce a false positive. Removing the
index from the check fixes this issue.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-18 09:35:49 -05:00
Vineet Gupta 9854783e55 perf, ARC: Enable building perf tools for ARC
Although with uClibc there's more we need to do

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2013-02-15 23:16:08 +05:30
Rafael J. Wysocki 95ecb40769 Merge branch 'pm-tools'
* pm-tools:
  ACPI tools / acpidump: must be run as root - install it into /usr/sbin
2013-02-15 13:59:00 +01:00
Vinson Lee 85df3b3769 perf tools: Fix build with bison 2.3 and older.
The %name-prefix "prefix" syntax is not available on bison 2.3 and
older. Substitute with the -p "prefix" command-line option for
compatibility with older versions of bison.

This patch fixes this build error with older versions of bison.

    CC util/sysfs.o
    BISON util/pmu-bison.c
util/pmu.y:2.14-24: syntax error, unexpected string, expecting =
make: *** [util/pmu-bison.c] Error 1

Signed-off-by: Vinson Lee <vlee@twitter.com>
Tested-by: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org # 3.4+
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1360792138-29186-1-git-send-email-vlee@twitter.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14 16:12:34 -03:00
Jiri Olsa 02320931ce perf tools: Limit unwind support to x86 archs
There's DWARF unwind support only for x86 archs, so limit the unwind.o
object to them only.

Without this building for other archs (e.g. cross compiling for ARM) is
broken.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: http://lkml.kernel.org/n/tip-viqtvd6hppqgt68zz4wlqm20@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14 15:59:33 -03:00
Namhyung Kim 18c9e5c567 perf annotate: Make it to be able to skip unannotatable symbols
Add --skip-missing option for skipping symbols that cannot be used for
annotation.  It's the case of kernel symbols that user doesn't have a
vmlinux image file.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14 14:59:28 -03:00
Namhyung Kim c0e79be749 perf gtk/annotate: Fail early if it can't annotate
Don't need to setup a browser window if annotate cannot work.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14 14:59:28 -03:00
Namhyung Kim 2375223786 perf gtk/annotate: Show source lines with gray color
In order to differentiate source lines from asm line, print them with
gray color.  To do this, it needs to be escaped since sometimes it
contains "<" and/or ">" characters so that it should not be considered
as a markup tags.  Use glib's g_markup_escape_text() for this.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14 14:59:28 -03:00
Namhyung Kim 7a60ba9482 perf gtk/annotate: Support multiple event annotation
Show multiple annotation result for each evsel.  Each result represents
the most frquently sampled symbol/function for the evsel and it will be
shown in a tab window.

For this add a reference to main container (notebook) to the pgctx.  At
the first call to annotate browser, hist_entry__find_annotations() will
setup a new browser, and next calls will add new tabs to the browser.
But it requires final perf_gtk__show_annotations() to start processing
GUI events.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14 14:59:28 -03:00
Namhyung Kim 2b676bf068 perf ui/gtk: Implement basic GTK2 annotation browser
Basic implementation of perf annotate on GTK2.  Currently only
shows first symbol.  Add a new --gtk option to use it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14 14:59:27 -03:00
Namhyung Kim e3a34029c6 perf annotate: Fix warning message on a missing vmlinux
When perf annotate runs with no vmlinux file it cannot annotate kernel
symbols because the kallsyms only provides symbol addresses.  So it
recommends to run perf buildid-cache to install proper vmlinux image.

But running perf buildid-cache -av vmlinux as the message gives me a
following error:

  $ perf buildid-cache -av /home/namhyung/build/kernel/vmlinux
  Couldn't add v: No such file or directory

Since the -a option receives a parameter, 'v' should not be after the
option.

In addition -a option is not work for this case since the build-id cache
already has a kallsyms with same build-id so it'll fail with EEXIST.
Use recently added -u (--update) option for it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14 14:59:27 -03:00
Namhyung Kim eeb4984542 perf buildid-cache: Add --update option
When adding vmlinux file to build-id cache, it'd be fail since kallsyms
dso with a same build-id was already added by perf record.

So one needs to remove the kallsyms first to add vmlinux into the cache.
Add --update option for doing it at once.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14 14:59:27 -03:00
Len Brown 1ed51011af tools/power turbostat: display SMI count by default
The SMI counter is popular -- so display it by default
rather than requiring an option.  What the heck,
we've blown the 80 column budget on many systems already...

Note that the value displayed is the delta
during the measurement interval.
The absolute value of the counter can still be seen with
the generic 32-bit MSR option, ie.  -m 0x34

Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-13 18:22:12 -05:00
Len Brown 6792041834 tools/power turbostat: decode MSR_IA32_POWER_CTL
When verbose is enabled, print the C1E-Enable
bit in MSR_IA32_POWER_CTL.

also delete some redundant tests on the verbose variable.

Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-08 19:26:16 -05:00
Len Brown 70b43400bc tools/power turbostat: support Haswell
This patch enables turbostat to run properly on the
next-generation Intel(R) Microarchitecture, code named "Haswell" (HSW).

HSW supports the BCLK and counters found in SNB.

Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-08 19:25:57 -05:00
Sergei Shtylyov 9742aecda4 testusb: remove all mentions of 'usbfs'
Commit 8a424bf40d (tools/usb: remove last USBFS
user) removed 'usbfs' files from the source but retained mentions of 'usbfs'
all over the place, most importantly in the misleading error messages printed
in case USB device files are not there.  Remove all the  mentions of 'usbfs'
for good now!

Signed-off-by: Sergei Shtylyov <sshtylyov@dev.rtsoft.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-08 12:15:24 -08:00
Arnaldo Carvalho de Melo 88fd2b6a76 perf python: Link with sysfs.o
So that we fix this regression:

[root@sandy linux]# perf test -v 15
15: Try 'use perf' in python, checking link problems       :
--- start ---
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: sysfs_find_mountpoint
---- end ----
Try 'use perf' in python, checking link problems: FAILED!
[root@sandy linux]#

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8pf64bsdywg1gl9m55ul77hg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:28 -03:00
Arnaldo Carvalho de Melo e35ef355ad perf evlist: Pass the event_group info via perf_attr_details
So that we avoid dragging symbol.o into the python binding.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-izjubje7ltd1srji5wb0ygwi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:28 -03:00
Paul Gortmaker 91b988048b perf tools: Fix calloc argument ordering
A sweep of the kernel for regex "kcalloc(sizeof" turned up 2 reversed
args, fixed in commit d3d09e1820 ("EDAC:
Fix kcalloc argument order") and also fixed in the networking commit
a1b1add07f ("gro: Fix kcalloc argument
order").

I know that was the regex used, because on seeing the 1st of these
changes, I wondered "how many other instances of this are there" and I
happened to just use "calloc(sizeof" as a regex and it in turn found
these additional reversed args instances in the perf code.

In the kcalloc cases, the changes are cosmetic, since the numbers are
simply multiplied.  I had no desire to go data mining in userspace to
see if the same thing held true there, however.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1359594349-25912-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:28 -03:00
Jiri Olsa 5a30a99fb4 perf tests: Adding automated parsing tests for group :GH modifiers
The ':GH' group modifier handling was just recently fixed, adding some
autommated tests to keep it that way. Adding tests for following events:

  "{cycles,cache-misses:G}:H"
  "{cycles,cache-misses:H}:G"
  "{cycles:G,cache-misses:H}:u"
  "{cycles:G,cache-misses:H}:uG"

Plus fixing test__group2 test.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1359971803-2343-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:28 -03:00
Jiri Olsa 89bb67ff93 perf tools: Fix perf_evsel::exclude_GH handling
Let the perf_evsel::exclude_GH only prevent the reset of exclude_host
and exclude_guest attributes in case they were already set.

We cannot reset their values to 0, because they might have other
defaults set by event_attr_init.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1359971803-2343-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:27 -03:00
Jiri Olsa b22e79395c perf perl scripts: Fix SIGALRM and pipe read race for rwtop
Fixing rwtop script race. The issue is caused by rwtop script triggering
SIGALRM and underneath pipe reading layer reporting error when
interrupted.

Fixing this by setting SA_RESTART for rwtop SIGALRM handler, which
avoids interruption of the pipe reading layer.

The discussion for this issue & fix is here:
https://lkml.org/lkml/2012/9/18/123

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Andrew Jones <drjones@redhat.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360080351-3246-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:27 -03:00
Jiri Olsa 0c5268bf22 perf hists browser: Add support to display whole group data for raw columns
Currently we don't display group members' values for raw columns like
'Samples' and 'Period' when in group report mode.

Uniting '__hpp__percent_fmt' and '__hpp__raw_fmt' function under new
function __hpp__fmt. It's basically '__hpp__percent_fmt' code with new
'fmt_percent' bool parameter added saying whether raw number or
percentage should be printed.

This way raw columns print out all the group members when
in group report mode, like:

  $ perf record -e '{cycles,cache-misses}' ls
  ...
  $ perf report --group --show-total-period --stdio
  ...
  #         Overhead                    Period  Command      Shared Object                             Symbol
  # ................  ........................  .......  .................  .................................
  #
      23.63%  11.24%       3331335         317       ls  [kernel.kallsyms]  [k] __lock_acquire
      12.72%   0.00%       1793100           0       ls  [kernel.kallsyms]  [k] native_sched_clock
       9.72%   0.00%       1369920           0       ls  libc-2.14.90.so    [.] _nl_find_locale
       0.03%   0.07%          4476           2       ls  [kernel.kallsyms]  [k] intel_pmu_enable_all
       0.00%  11.73%             0         331       ls  ld-2.14.90.so      [.] _dl_cache_libcmp
       0.00%  11.06%             0         312       ls  [kernel.kallsyms]  [k] vma_interval_tree_insert

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1359981185-16819-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:27 -03:00
Stephane Eranian d7e7a451c1 perf stat: Add per processor socket count aggregation
This patch adds per-processor socket count aggregation for system-wide
mode measurements. This is a useful mode to detect imbalance between
sockets.

To enable this mode, use --aggr-socket in addition
to -a. (system-wide).

The output includes the socket number and the number of online
processors on that socket. This is useful to gauge the amount of
aggregation.

 # ./perf stat -I 1000 -a --aggr-socket -e cycles sleep 2
 #           time socket cpus             counts events
      1.000097680 S0        4          5,788,785 cycles
      2.000379943 S0        4         27,361,546 cycles
      2.001167808 S0        4            818,275 cycles

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360161962-9675-3-git-send-email-eranian@google.com
[ committer note: Added missing man page entry based on above comments ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:27 -03:00
Stephane Eranian 5ac59a8a77 perf tools: Add cpu_map processor socket level functions
This patch adds:
- cpu_map__get_socket: get socked id from cpu
- cpu_map__build_socket_map: build socket map
- cpu_map__socket: gets acutal socket from logical socket

Those functions are used by uncore and processor socket-level
aggregation modes.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360161962-9675-2-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:26 -03:00
David Ahern 0479b8b9cf perf evlist: Make event_copy local to mmaps
I am getting segfaults *after* the time sorting of perf samples where
the event type is off the charts:

(gdb) bt
\#0  0x0807b1b2 in hists__inc_nr_events (hists=0x80a99c4, type=1163281902) at util/hist.c:1225
\#1  0x08070795 in perf_session_deliver_event (session=0x80a9b90, event=0xf7a6aff8, sample=0xffffc318, tool=0xffffc520,
    file_offset=0) at util/session.c:884
\#2  0x0806f9b9 in flush_sample_queue (s=0x80a9b90, tool=0xffffc520) at util/session.c:555
\#3  0x0806fc53 in process_finished_round (tool=0xffffc520, event=0x0, session=0x80a9b90) at util/session.c:645

This is bizarre because the event has already been processed once --
before it was added to the samples queue -- and the event was found to
be sane at that time.

There seem to be 2 causes:

1. perf_evlist__mmap_read updates the read location even though there
are outstanding references to events sitting in the mmap buffers via the
ordered samples queue.

2. There is a single evlist->event_copy for all evlist entries.
event_copy is used to handle an event wrapping at the mmap buffer
boundary.

This patch addresses the second problem - making event_copy local to
each perf_mmap. With this change my highly repeatable use case no longer
fails.

The first problem is much more complicated and will be the subject of a
future patch.

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360098762-61827-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:26 -03:00
Namhyung Kim 5936f54d6c perf sort: Check return value of strdup()
When setup_sorting() is called, 'str' is passed to strtok_r() but it's
not checked to have a valid pointer.  As strtok_r() accepts NULL pointer
on a first argument and use the third argument in that case, it can
cause a trouble since our third argument, tmp, is not initialized.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1360130237-9963-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:26 -03:00
Namhyung Kim 5530998577 perf sort: Make setup_sorting returns an error code
Currently the setup_sorting() is called for parsing sort keys and exits
if it failed to add the sort key.  As it's included in libperf it'd be
better returning an error code rather than exiting application inside of
the library.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1360130237-9963-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:26 -03:00
Namhyung Kim 51f27d1440 perf sort: Drop ip_[lr] arguments from _sort__sym_cmp()
Current _sort__sym_cmp() function is used for comparing symbols between
two hist entries on symbol, symbol_from and symbol_to sort keys.  Those
functions pass addresses of symbols but it's meaningless since it gets
over-written inside of the _sort__sym_cmp function to a start address of
the symbol.  So just get rid of them.

This might cause a difference than prior output for branch stacks since
it seems not using start address of the symbol but branch address.
However AFAICS it'd be same as it gets overwritten anyway.

Also remove redundant part of code in sort__sym_cmp().

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1360130237-9963-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:25 -03:00
Borislav Petkov 2209001fd8 perf tools: Check for flex and bison before continuing building
Check whether both executables are present on the system before
continuing with the build instead of failing halfway, if either are
missing.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1359979554-9160-1-git-send-email-bp@alien8.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:25 -03:00
Stephane Eranian 74b2133d19 perf evlist: Fix set event list leader
The __perf_evlist__set_leader() was setting the leader for all events in
the list except the first. Which means it assumed the first event
already had event->leader = event.

Seems like this should be the role of the function to also do this. This
is a requirement for an upcoming patch set.

Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130131125437.GA3656@quad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:25 -03:00
Feng Tang ad0de0971b perf report: Enable the runtime switching of perf data file
This is for tui browser only. This patch will check the returned key of
tui hists browser, if it's K_SWITH_INPUT_DATA, then recreate a session
for the new selected data file.

V2: Move the setup_brower() before the "repeat" jump point.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359873501-24541-2-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:25 -03:00
Feng Tang 341487ab56 perf hists browser: Add option for runtime switching perf data file
Based on perf report/top/scripts browser integration idea from acme.

This will enable user to runtime switch the data file, when this option
is selected, it will popup all the legal data files in current working
directory, and the filename selected by user is saved in the global
variable "input_name", and a new key 'K_SWITCH_INPUT_DATA' will be
passed back to the built-in command which will perform the switch.

This initial version only enables it for 'perf report'.

v2: rebase to latest 'perf/core' branch (6e1d4dd) of acme's perf tree

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359873501-24541-1-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-06 18:09:24 -03:00
Thomas Renninger e183fcb344 ACPI tools / acpidump: must be run as root - install it into /usr/sbin
Change the default location to install acpidump into from /usr/bin
to /usr/sbin, as this tool needs to be run as root.

[rjw: Subject and changelog]
Signed-off-by: Thomas Renninger <trenn@suse.de>
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-05 23:35:32 +01:00
Steven Rostedt (Red Hat) 4c0b67a27d ktest: Ignore warnings during reboot
The reboot just wants to get to the next kernel. But if a warning (Call
Trace) appears, the monitor will report an error, and the reboot will
think something went wrong and power cycle the box, even though we
successfully made it to the next kernel.

Ignore warnings during the reboot until we get to the next kernel. It
will still timeout if we never get to the next kernel and then a power
cycle will happen. That's what we want it to do.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-05 10:02:37 -05:00
Steven Rostedt (Red Hat) d684553623 ktest: Search for linux banner for successful reboot
Sometimes when a test kernel passed fine, but on reboot it crashed,
ktest could get stuck and not proceed. This would be frustrating if you
let a test run overnight to find out the next morning that it was stuck
on the first test.

To fix this, I made reboot check for the REBOOT_SUCCESS_LINE. If the
line was not detected, then it would power cycle the box.

What it didn't cover was if the REBOOT_SUCCESS_LINE wasn't defined or if
a 'good' kernel did not display the line. Instead have it search for the
Linux banner "Linux version". The reboot just needs to get to the start
of the next kernel, it does not need to test if the next kernel makes it
to a boot prompt.

After we find the next kernel has booted, then we just wait for either
the REBOOT_SUCCESS_LINE to appear or the timeout.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-05 10:00:20 -05:00
Joonsoo Kim 1363b563a7 tools/vm: add .gitignore to ignore built binaries
There is no .gitignore in tools/vm, so 'git status' always show built
binaries.  To ignore this, add .gitignore.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-05 20:38:46 +11:00
Namhyung Kim e6ab07d027 perf evlist: Add --group option
Add '-g/--group' option for showing event groups.  For simplicity it is
currently not compatible with other options.

  $ perf evlist --group
  {ref-cycles,cycles}

  $ perf evlist
  ref-cycles
  cycles

Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-20-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:49 -03:00
Namhyung Kim 00c7e1f10c perf report: Add report.group config option
Add report.group config option for setting default value of event
group view.  It affects the report output only if perf.data contains
event group info.

A user can write .perfconfig file like below to enable group view by
default:

  $ cat ~/.perfconfig
  [report]
  group = true

And it can be disabled through command line:

  $ perf report --no-group

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-19-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:49 -03:00
Namhyung Kim 01d14f1615 perf report: Add --group option
Add --group option to enable event grouping.  When enabled, all the
group members information will be shown together with the leader.

  $ perf report --group
  ...
  # group: {ref-cycles,cycles}
  # ========
  #
  # Samples: 7K of event 'anon group { ref-cycles, cycles }'
  # Event count (approx.): 6876107743
  #
  #         Overhead  Command      Shared Object                      Symbol
  # ................  .......  .................  ..........................
  #
      99.84%  99.76%  noploop  noploop            [.] main
       0.07%   0.00%  noploop  ld-2.15.so         [.] strcmp
       0.03%   0.00%  noploop  [kernel.kallsyms]  [k] timerqueue_del
       0.03%   0.03%  noploop  [kernel.kallsyms]  [k] sched_clock_cpu
       0.02%   0.00%  noploop  [kernel.kallsyms]  [k] account_user_time
       0.01%   0.00%  noploop  [kernel.kallsyms]  [k] __alloc_pages_nodemask
       0.00%   0.00%  noploop  [kernel.kallsyms]  [k] native_write_msr_safe
       0.00%   0.11%  noploop  [kernel.kallsyms]  [k] _raw_spin_lock
       0.00%   0.06%  noploop  [kernel.kallsyms]  [k] find_get_page
       0.00%   0.02%  noploop  [kernel.kallsyms]  [k] rcu_check_callbacks
       0.00%   0.02%  noploop  [kernel.kallsyms]  [k] __current_kernel_time

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-18-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:49 -03:00
Namhyung Kim 717e263fc3 perf report: Show group description when event group is enabled
When using event group viewer, it's better to show the group description
rather than the leader information alone.

If a leader did not contain any member, it's a non-group event.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-17-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:48 -03:00
Namhyung Kim fc24d7c25c perf report: Bypass non-leader events when event group is enabled
Since we have all necessary information in the leader events and other
members don't, bypass members.  Member events will be shown along with
the leaders if event group is enabled.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-16-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:48 -03:00
Namhyung Kim 34b9564373 perf gtk/browser: Trim column header string when event group enabled
When event group feature is enabled, each column header is expanded to
match with the whole group column width.  But this is not needed for
GTK+ browser since ti usually use variable-width fonts.  So trim it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-15-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:48 -03:00
Namhyung Kim cb16008bcc perf gtk/browser: Add support for event group view
Show group members's overhead also when showing leader's if event
group is enabled.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranina@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-13-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:47 -03:00
Namhyung Kim 371d8c402e perf hists browser: Add suppport for event group view
Show group members' overhead also when showing the leader's if event
group is enabled.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-12-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:47 -03:00
Namhyung Kim 897014603c perf hists browser: Move coloring logic to hpp functions
Move coloring logic into the hpp functions so that each value can
be colored independently.  It'd required for event group view.

For overhead column, add a callback for printing 'folded_sign' of
callchains of a hist entry.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1358845787-1350-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:47 -03:00
Namhyung Kim 5b9e2146ec perf ui/hist: Add support for event group view
Show group member's overhead also when showing the leader's if event
group is enabled.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:46 -03:00
Namhyung Kim 843985e953 perf gtk/browser: Convert hpp helpers to a function
The hpp helpers do same job for each field so it was implemented as
macro in order to access those fields easily.  But it gets cumbersome to
maintain a large function in a macro as the function grows. Factor it
out to a function with a little helper macro to access field.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:46 -03:00
Namhyung Kim 5aed9d2493 perf hists browser: Convert hpp helpers to a function
The hpp helpers do same job for each field so it was implemented as
macro in order to access those fields easily.  But it gets cumbersome
to maintain a large function in a macro as the function grows. Factor
it out to a function with a little helper macro to access field.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:46 -03:00
Namhyung Kim 4fb71074a5 perf ui/hist: Consolidate hpp helpers
Most of hpp helper functions do same jobs for different fields thus
consolidate them to appropriate functions/macros.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:45 -03:00
Namhyung Kim 29d720ed5f perf hists: Resort hist entries using group members for output
When event group is enabled, sorting hist entries on periods for output
should consider groups members' period also.  To do that, build period
table using link/pair information and compare the table.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:45 -03:00
Namhyung Kim 6e1f601a10 perf report: Make another loop for linking group hists
Now the event grouping viewing requires linking all member hists in a
group to the leader's.  Thus hists__output_resort should be called after
linking all events in evlist.

Introduce symbol_conf.event_group flag to determine whether the feature
is enabled or not.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:44 -03:00
Namhyung Kim a8bb559bd4 perf header: Add HEADER_GROUP_DESC feature
Save group relationship information so that it can be restored when perf
report is running.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:44 -03:00
Namhyung Kim 8d7d8474d7 perf tests: Add group test conditions
As some new fields for handling groups added, check them to be sure to
have valid values in test__group* cases.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:44 -03:00
Namhyung Kim 97f63e4a2c perf tools: Keep group information
Add a few of group-related field in struct perf_{evlist,evsel} so that
the group information in a evlist can be known easily.  It only counts
groups which have more than 1 members since leader-only groups are
treated as non-group events.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:43 -03:00
Arnaldo Carvalho de Melo 0de233b9c4 perf top: Delete maps on exit
Removing one more memory leak found with valgrind.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gnb1gms0k8wictmtm2umpr8u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:43 -03:00
Arnaldo Carvalho de Melo 11859e8217 perf top: Stop using exit()
Just return to the perf main() routine so that an unified exit path can
be followed and resources released, helping in finding memory leaks.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ro8oeodo96490nrhcph57atr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:42 -03:00
Steven Rostedt (Red Hat) 4283b169ab ktest: Add make_warnings_file and process full warnings
Although the patchcheck test checks for warnings in the files that were
changed, this check does not catch warnings that were caused by header
file changes and the warnings appear in C files not touched by the
commit.

Add a new option called WARNINGS_FILE. If this option is set, then the
file it points to is read before bulid, and the file should contain a
list of known warnings. If a warning appears in the build, this file is
checked, and if the warning does not exist in this file, then it fails
the build showing the new warning.

If the WARNINGS_FILE points to a file that does not exist, this will
cause any warning in the build to fail.

A new test is also added called "make_warnings_file". This test will
create do a build and record any warnings it finds into the
WARNINGS_FILE. This test is something that can be run before other tests
to build a warnings file of "known warnings", ie, warnings that were
there before your changes.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-31 10:24:56 -05:00
Steven Rostedt (Red Hat) 04262be3db ktest: Allow a test option to use its default option
Options are allowed to use other options, for example:

  LOG_FILE = ${OUTPUT_DIR}/${MACHINE}.log

where the option LOG_FILE used the options OUTPUT_DIR and MACHINE.

But if a test option were to use a default option, it will not get
substituted:

  OUTPUT_DIR = ${THIS_DIR}/${MACHINE}

  TEST_START
  OUTPUT_DIR = ${OUTPUT_DIR}/t1

For the above test, OUTPUT_DIR will stay literally "${OUTPUT_DIR}/t1"
and not be converted to "${THIS_DIR}/${MACHINE}/t1". When the test runs,
it will pass the ${OUTPUT_DIR} to the shell, which would probaly
interpret it as "", and the output directory will end up as "/t1".

Change the code where if a test option has its own option name in
its defined field, and a default option exists, then substitute the
default option in its place.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-31 10:24:53 -05:00
Steven Rostedt (Red Hat) 35275685bf ktest: Strip off '\n' when reading which files were modified
The patchcheck test looks at what files are modified for each patch it
checks and makes sure that those files do not produce any warnings.

Unfortunately, when it read the diffstat, the newlines were added on the
files and this made compares miss warnings, and commits that should not
have passed, ktest let pass.

Fix this by using the perl command "chomp" that strips off whitespace at
the end of lines.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-30 12:28:15 -05:00
Steven Rostedt (Red Hat) 319ab14f05 ktest: Do not require CONSOLE for build or install bisects
If the user is doing a build or install bisect, there's no reason to
have them define CONSOLE, as the console does not need to be read. The
console only needs to be read for boot tests.

CONSOLE is not required for normal build or install tests, let's not
require it for bisect tests with BISECT_TYPE of build or install.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-30 12:25:38 -05:00
Thomas Jarosch 5809fde040 perf header: Fix double fclose() on do_write(fd, xxx) failure
cppcheck reported:
[util/header.c:983]: (error) Used file that is not opened.

Thanks to Arnaldo Carvalho de Melo for pointing out that
fclose(NULL) is undefined behavior -> protect against it.

Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Link: http://lkml.kernel.org/r/1751778.SZQB4fNdIh@storm
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-30 10:40:44 -03:00
Thomas Jarosch fdae637391 perf header: Fix memory leak for the "Not caching a kptr_restrict'ed /proc/kallsyms" case
cppcheck reported:
[util/header.c:316]: (error) Memory leak: filename
[util/header.c:316]: (error) Memory leak: linkname

Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Link: http://lkml.kernel.org/r/9377388.0eFDp53iW6@storm
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-30 10:40:18 -03:00