Commit Graph

26 Commits

Author SHA1 Message Date
Hauke Mehrtens 41790fd51f MIPS: BCM47xx: Extend the filling of SPROM from NVRAM
Some members of the struct ssb_sprom where not filled with data available
in the NVRAM. Some attribute names in the NVRAM changed from SPROM version
3 to version 4. This patch was done by analyzing the the pci sprom parser
in the ssb code and some open source parts of the braodcom wireless driver
used on embedded devices.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2365/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:47 +01:00
Hauke Mehrtens fe6f3642ac MIPS: BCM47xx: Register SSB fallback sprom callback
We are generating the prefix based on the PCI bus address the device is
on. This is done like Broadcom does it in their code expect that the the
bus number is increased by one. In the SB bus implementation used by
Broadcom the SB bus emulates a PCI bus so the kernel sees one PCI bus
more then in our implementation. We do not handle prefixes like sb/1/
yet as they are only used on the new bus which is not implemented yet.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2364/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:47 +01:00
Hauke Mehrtens a7c62f8564 MIPS: BCM47xx: Extend bcm47xx_fill_sprom with prefix.
When an other SSB based device without an own SPROM is attached, using the
PCI bus to the main SSB based device, the data normally found in the SPROM
will be stored in the NVRAM on modern devices. The keys, to load the data
from the NVRAM, are all using some sort of prefix like pci/1/1/, pci/1/3/
or sb/1/ before the actual key. This patch extends bcm47xx_fill_sprom() to
make it possible to read out these values when some prefix was used.

The keys for the SPROM data used on the main chip does not have a prefix.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2363/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:47 +01:00
Hauke Mehrtens 1690a7f9ab MIPS: BCM47xx: Swap serial console if ttyS1 was specified.
Some devices like the Netgear WGT634U are using ttyS1 for default console
output. We should switch to that console if it was given in the kernel_args
parameters.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
To: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/1848/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16 18:11:00 +00:00
Hauke Mehrtens 59833fcf48 MIPS: BCM47xx: Use sscanf for parsing mac address
Instead of writing own function for parsing the mac address we now
use sscanf.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
To: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/1847/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16 18:10:59 +00:00
Hauke Mehrtens 2aa088d6fd MIPS: BCM47xx: Fill values for b43 into SSB sprom
Fill the sprom with all available values from the nvram. Most of these
new values are needed for the b43 or b43legacy driver.

Parts of this patch have been in OpenWRT for a long time and were written
by Michael Buesch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
To: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/1846/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16 18:10:59 +00:00
Hauke Mehrtens 8257108436 MIPS: BCM47xx: Do not read config from CFE
The config options read out here are not stored in CFE but only in NVRAM on
the devices. Remove reading from CFE and only access the NVRAM.  Reading out
CFE does not harm but is useless here.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
To: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/1845/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16 18:10:59 +00:00
Hauke Mehrtens 47a3486144 MIPS: BCM47xx: Fix nvram_getenv return value.
Nvram_getenv should behave like cfe_getenv. cfe_getenv returns 0 on
success and -9 if the value was not found. If the input was wrong -8
will be returned by cfe_getenv.  Change nvram_getenv to do the same.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1520/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05 13:26:31 +01:00
Ralf Baechle 53e4345906 MIPS: BCM47xx: Migrate to new platform makefile style.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05 13:25:54 +01:00
Hauke Mehrtens aec9222551 MIPS: BCM47xx: Really fix 128MB RAM problem
The previous patch 4a86f2d27733f610e642649aca3e82e86fca9e22 (lmo) rsp.
84a6fcb368 (kernel.org) was wrong.

The BCM47xx architecture maps the ram into a 128MB address space. It
will be spaced there as often as goes into the 128MB. Detection tries to
find the position where the same memory is found. When reading beyond
128MB the processor will throw an exception. If 128MB RAM is installed,
it will not find a memory alias because it tries to read beyond the 128MB
border. Now it just assumes 128MB installed ram if it can not find an
alias.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1508/
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05 13:25:39 +01:00
Waldemar Brodkorb 121915c4ee MIPS: BCM47xx: Add NVRAM support devices
When trying to netboot a Linksys WRT54GS WLAN router, the bootup fails,
because of following error message:

...
[    0.424000] b44: b44.c:v2.0
[    0.424000] b44: Invalid MAC address found in EEPROM
[    0.432000] b44 ssb0:1: Problem fetching invariants of chip,aborting
[    0.436000] b44: probe of ssb0:1 failed with error -22
...

The router uses a CFE bootloader, but most of the needed environment
variables for network card initialization, are not available from CFE
via printenv and even though not via cfe_getenv().
The required environment variables are saved in a special partition
in flash memory. The attached patch implement nvram_getenv and enables
bootup via NFS root on my router.

Most of the patch is extracted from the OpenWrt subversion repository and
stripped down and cleaned up to just fix this issue.

[Ralf: sorted out header file inclusions.  Lots of unneded headers and such
that should have been included.]

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: Phil Sutter <phil@nwl.cc>
To: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: http://patchwork.linux-mips.org/patch/1359/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-05 17:17:32 +01:00
Ralf Baechle e0e53dee69 MIPS: Nuke trailing blank lines
Recent git versions now warn about those and they've always been a bit of
an annoyance.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27 12:53:14 +01:00
Hauke Mehrtens 84a6fcb368 MIPS: BCM47xx: Fix 128MB RAM support
Ignoring the last page when ddr size is 128M. Cached accesses to last page
is causing the processor to prefetch using address above 128M stepping out
of the DDR address space.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/981/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-22 21:42:12 +01:00
Dmitri Vorobiev 7580c9c393 MIPS: Replace all usages of CL_SIZE by COMMAND_LINE_SIZE
The MIPS-specific macro CL_SIZE is merely aliasing the macro
COMMAND_LINE_SIZE. Other architectures use the latter; also,
COMMAND_LINE_SIZE is documented in kernel-parameters.txt, so
let's use it, and remove the alias.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17 01:56:56 +00:00
Atsushi Nemoto c430452954 MIPS: Make local arrays with CL_SIZE static __initdata
Since commit 22242681cf ("MIPS: Extend
COMMAND_LINE_SIZE"), CL_SIZE is 4096 and local array variables with this
size will cause an build failure with default CONFIG_FRAME_WARN settings.

Although current users of such array variables are all early bootstrap
code and not likely to cause real stack overflow (thread_info corruption),
it is preferable to  to declare these arrays static with __initdata.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-13 18:10:37 +01:00
Aurelien Jarno 89f8c04a49 MIPS: WGT634U: Add reset button support
This patch adds support for the reset button of WGT634U machine, using
GPIO interrupts. Based on a patch from Michel Lespinasse.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:51 +01:00
Aurelien Jarno b06f3e19a6 MIPS: BCM47xx: Use the new SSB GPIO API
This patch simplifies the BCM47xx GPIO code by using the new SSB GPIO
API, which does a lot things that were implemented directly in the
BCM47xx code.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:50 +01:00
Aurelien Jarno 91a385b8f2 MIPS: WGT634U: Add machine detection message
This adds a printk message when a WGT634U machine is detected.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:50 +01:00
Aurelien Jarno cc2d6f701b [MIPS] BCM47XX: Use new SSB SPROM data structure
Switch the BCM47XX code to the new SPROM data structure now that the old
one has been removed.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-02-19 17:01:34 +00:00
Aurelien Jarno 0788150e63 [MIPS] WGT634U: Register MTD as platform device.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-02-19 17:01:34 +00:00
Atsushi Nemoto 1d9ef3ecd7 [MIPS] Kill duplicated setup_irq() for cp0 timer
Also many plat_timer_setup() can be killed too.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-19 18:15:58 +01:00
Ralf Baechle 4b550488f8 [MIPS] Deforest the function pointer jungle in the time code.
Hard to follow who is pointing what to where and why so it's simply getting
in the way of the time code renovation.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:08 +01:00
Aurelien Jarno 21c854dcbd [MIPS] GPIO LED driver for the WGT634U machine
Add LED support to the WGT634U machine.  It uses the new gpio-led
driver and a platform driver for the pin definitions.
    
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:07 +01:00
Aurelien Jarno 34cc662f8a [MIPS] Add gpio support to the BCM47XX platform
Add GPIO support to the BCM47XX platform.  It will be used by a GPIO
LED driver.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:07 +01:00
Aurelien Jarno 25e5fb9741 [MIPS] Add CFE support to BCM47XX
Add CFE support to the BCM47XX code.  That includes querying CFE environment
variables as well as using CFE to print messages before the serial port is
initialized (early printk).
    
Signed-off-by: Aurelien Jarno <aurel32@farad.aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:06 +01:00
Aurelien Jarno 1c0c13eb93 [MIPS] Add support for BCM47XX CPUs.
Note that the BCM4710 does not support the wait instruction, this
is not a mistake in the code.
    
It originally comes from the OpenWrt patches.
    
Cc: Michael Buesch <mb@bu3sch.de>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Florian Schirmer <jolt@tuxbox.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:02 +01:00