I screwed up the sense of this if() statement while porting our
vendor driver to create the dwc2 driver. This caused frame overrun
errors on periodic transfers when there were other transfers
active in the same (micro)frame.
With this fix, the dwc2 driver now works on the Raspberry Pi
platform even with the USB Ethernet controller enabled, where
before that would cause all USB devices to stop working.
Thanks to Ray Jui and Jerry Lin at Broadcom for tracking this down.
Reported-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pci_enable_device() will set device power state to D0,
so it's no need to do it again in dwc2_driver_probe().
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Passing the value DMA_BIT_MASK(31) to dma_set_mask() causes the
dwc2-pci driver to sometimes fail (cannot enumerate the connected
device). Change it to DMA_BIT_MASK(32) instead, which is a more
sensible value anyway.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change some dev_dbg() messages in dwc2_hcd_hub_control() to
dev_vdbg(), to prevent massive spew to the dmesg log when a device
is disconnected.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We want the changes here, and we resolve the merge conflict that was
happening in the nvec_kbd.c file.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some staging tree driver fixes for 3.10-rc2
The drivers/iio/ changes are here as they are still tied into
drivers/staging/iio/.
Nothing major, just a number of small bugfixes, and a larger documentation
update for the ramster code.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlGeO5kACgkQMUfUDdst+ykILACdF6dUbLOa4Nvp9zqJcq87eBA2
ubAAoMl6Cwwo1HGs8kzL/wNxSLQIxqTQ
=XMx9
-----END PGP SIGNATURE-----
Merge tag 'staging-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg Kroah-Hartman:
"Here are some staging tree driver fixes for 3.10-rc2
The drivers/iio/ changes are here as they are still tied into
drivers/staging/iio/.
Nothing major, just a number of small bugfixes, and a larger
documentation update for the ramster code."
* tag 'staging-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits)
staging: dwc2: remove compile warning for USB_DWC2_TRACK_MISSED_SOFS
iio: exynos_adc: fix wrong structure extration in suspend and resume
iio:common:st: added disable function after read info raw data
iio: dac: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m
staging:iio:light:tsl2x7x: fix the error handling in tsl2x7x_probe()
staging/iio/mxs-lradc: fix preenable for multiple buffers
staging: imx-drm: imx-tve: Check the return value of 'regulator_enable()'
staging: video: imx: Select VIDEOMODE_HELPERS for parallel display
staging: ramster: add how-to document
staging: dwc2: Fix dma-enabled platform devices using a default dma_mask
staging: vt6656: [bug] Fix missing spin lock in iwctl_siwpower.
staging: Swap zram and zsmalloc in Kconfig
staging: android: logger: use kuid_t instead of uid_t
staging: zcache: Fix incorrect module_param_array types
staging/solo6x10: depend on CONFIG_FONTS
staging/drm: imx: add missing dependencies
staging: ste_rmi4: Suppress 'ignoring return value of ‘regulator_enable()' warning
staging: sep: fix driver build and kconfig
staging: nvec: cleanup childs on remove
staging: nvec: implement unregistering of notifiers
...
Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2
The majority of these are USB gadget fixes, but they are all small.
Other than that, some USB host controller fixes, and USB serial driver
fixes for problems reported with them.
Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems to
be almost impossible to get right for all of the different platforms
these days.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlGeP/gACgkQMUfUDdst+ykXygCfeIL5/HMREhUSHQgb6IiIDR81
QHAAn0zJfRAyWUz4AtbrRsLSVfk3Q9vm
=DQIq
-----END PGP SIGNATURE-----
Merge tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2
The majority of these are USB gadget fixes, but they are all small.
Other than that, some USB host controller fixes, and USB serial driver
fixes for problems reported with them.
Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems
to be almost impossible to get right for all of the different
platforms these days."
* tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits)
USB: cxacru: potential underflow in cxacru_cm_get_array()
USB: ftdi_sio: Add support for Newport CONEX motor drivers
USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card
usb: ohci: fix goto wrong tag in err case
usb: isp1760-if: fix memleak when platform_get_resource fail
usb: ehci-s5p: fix memleak when fallback to pdata
USB: serial: clean up chars_in_buffer
USB: ti_usb_3410_5052: fix chars_in_buffer overhead
USB: io_ti: fix chars_in_buffer overhead
USB: ftdi_sio: fix chars_in_buffer overhead
USB: ftdi_sio: clean up get_modem_status
USB: serial: add generic wait_until_sent implementation
USB: serial: add wait_until_sent operation
USB: set device dma_mask without reference to global data
USB: Blacklisted Cinterion's PLxx WWAN Interface
usb: option: Add Telewell TW-LTE 4G
USB: EHCI: remove bogus #error
USB: reset resume quirk needed by a hub
USB: usb-stor: realtek_cr: Fix compile error
usb, chipidea: fix link error when USB_EHCI_HCD is a module
...
Remove the compile-time warning for this config option, and instead
warn that it is experimental in the Kconfig text
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Platform devices added through OF usually do not have any dma_mask
pointer set. If the hardware advertises DMA support, the driver will
expect DMA buffers to be passed in, but the USB core will not do this
due to lack of a dma mask, breaking all connectiviy.
To fix this, set a default dma_mask by pointing it at the
coherent_dma_mask and set their value to a 32 bit mask. This still
allows any platform code to set any more specific mask if needed, but
makes the driver work for most dma-enabled hardware.
It would be great if this patch could be included in 3.10, since it is
needed to make the dwc2 driver work on the ralink rt3052 target.
Before, the plan was to set up the dma mask in MIPS platform code, but
because of a similar change in ehci and the uglyness of the code for
that, the plan for that infrastructure was dropped. This patch makes the
setting of the dma_mask happen in the same way as the patch Stephen
Warren (set device dma_mask without reference to global data).
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace a call to deprecated devm_request_and_ioremap by devm_ioremap_resource.
Found with coccicheck and this semantic patch:
scripts/coccinelle/api/devm_request_and_ioremap.cocci.
Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Reviewed-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This removes some debug prints from pci.c and makes platform.c and pci.c
a bit more similar again.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now the functions use proper const annotations, the global variable with
default params can be marked const, which prevents these values from
being changed for a specific device (in theory there could be multiple
controllers with different settings, for example).
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
[matthijs@stdin.nl: Split patch from bigger patch, marked
dwc2_module_params in pci.c as const and added
commit message]
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value in params->enable_dynamic_fifo can only be true if the
corresponding bit in hwcfg2 is set, this is already checked by
dwc2_set_param_enable_dynamic_fifo.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This code appears to be partially incorrect. Since this is only debug
code and only applies to device mode, it seems better to remove this
code for now than to invest time fixing it.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now a register is masked only in once place, instead of twice. This
makes the two uses of this value shorter so they no longer need to be
linewrapped.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before, there were two places that manually read the FRNUM registers,
while there is a function to do this.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There were already macros for these, they just weren't being used in a
few places.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The handling for the IC2INT and RESTOREDONE interrupts just cleared the
interrupt flag, but did not do anything else. Since these interrupts are
not enabled anywhere, they should never trigger and there should never
be a need to clear their flags, so we can safely remove this code.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This makes the function name more clear and consistent with
dwc2_handle_common_intr().
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The top-level hcd interrupt handlers already used irq_return_t, but the
functions to which it delegates the actual work and the common irq
handler returned plain ints. In addition, they used the IRQ_RETVAL in
the wrong way (but because of the values of the various constants, this
didn't result in wrong behaviour).
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
[matthijs@stdin.nl: Split patch from bigger patch and added commit message]
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This flag is a deprecated NOOP, interrupt handlers are always run
with interupts disabled.
See commit 6932bf37 (genirq: Remove IRQF_DISABLED from core code), and
include/linux/interrupt.h:
* IRQF_DISABLED - keep irqs disabled when calling the action handler.
* DEPRECATED. This flag is a NOOP and scheduled to be removed
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Kconfig symbol USB_OTG_UTILS was removed in the v3.10 merge window,
in commit fd89149875 ("usb: phy: remove CONFIG_USB_OTG_UTILS"). But that
symbol popped up again in a few places. Remove it there too.
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This adds a dwc_platform.ko module that can be loaded by using
compatible = "snps,dwc2" in a device tree.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We were testing qtd->urb pointer for null after we had already
dereferenced it
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A few debug messages were missing newlines, add them
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We were testing hsotg pointer for null after we had already
dereferenced it
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before, it was a function that would set all members of a given struct
containing only int members to -1. Now, it is renamed to
dwc_set_all_params and it works only on the dwc2_core_params struct.
This makes sure that all of the slightly dubious casting and assumptions
happen inside the function instead of by the caller.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, it was "dwc_otg", but this does not correspond to the
directory name and might cause confusion with the old out-of-tree
dwc_otg driver of which many versions circulate.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before, this was initialized in pci.c, after the dwc2_hcd_init was
called and the interrupts were enabled. This opened up a small time
window where common interrupts could be triggered, but there was no
handler for them, causing them to keep triggering infinitely and locking
up the machine.
On my RT3052 board this bug could be easily reproduced by hardcoding
the console log level to 8, so that a bunch of debug output from the dwc2
driver was generated inside this time window. This caused the interrupt
lockup to occur almost every time.
By requesting the irq inside dwc2_core_init and by disabling interrupts
before calling dwc2_core_init instead of after, we can be sure the
handler is registered before the interrupts are enabled, which should
close this window.
Reported-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems this flag is intended to pass to irq_set_status_flags, not
request_irq, and is not available on all architectures. Its value
corresponds to IRQF_PROBE_SHARED, which shouldn't be needed for this
driver, so removing this flag should be safe.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds a config option USB_DWC2_DEBUG_PERIODIC that allows debugging
output be suppressed for periodic transfers. This helps when debugging
non-periodic transfers while there are also periodic transfers going on
(both to make the debug output less polluted and to prevent all CPU time
going to debug messages).
In addition, a debug message from dwc2_hcd_is_status_changed is removed
entirely, since it often floods the log regardless of periodic
transfers.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Cc: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We were setting the DMA masks in dwc2_driver_probe(), but that is
before the driver parameters have been set to their default values.
That meant the DMA masks could be set wrong. Fix it by moving the
DMA mask setting into dwc2_hcd_init(), after the driver parameters
have been set.
Reported-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unneeded struct device *dev argument from dwc2_hcd_init()
and dwc2_hcd_remove(), and pass in the value through the hsotg->dev
member instead
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, when an active urb was dequeued, its host channel would
not always be released. There is some special handling for this in
dwc2_hc_chhltd_intr_dma, but when it was the last urb/qtd in its qh, a
safeguard in dwc2_hc_n_intr would short-circuit and prevent the regular
interrupt handlers from running, without releasing the channel.
This is easily triggered when using a 3G modem using the option driver.
Opening and closing any ttyUSBx device will eat up a host channel that
is forever unusable from that point on.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
[paulz@synopsys.com: fixed comment style and added a couple of NULL checks]
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dwc2_hcd_release() calls dwc2_hcd_free() which frees ->core_params
and sets it to NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix some compiler warnings when building for i386 arch. Reported by
Fengguang's build-bot.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the DWC2 Kconfig and Makefile, and modify the staging Kconfig and
Makefile to include them
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file contains the PCI bus interface "glue" for the DWC2 driver
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file contains code to support the HCD descriptor DMA mode of
the controller
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These files contain the HCD code, and implement the Linux
hc_driver API. Support for both slave mode and buffer DMA mode
of the controller is included.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The core code provides basic services for accessing and managing
the DWC_otg hardware. These services are used by both the Host
Controller Driver and (in future) the Peripheral Controller Driver.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Zimmerman
Greg Kroah-Hartman
Yijing Wang
Linus Torvalds
Wolfram Sang
Matthijs Kooijman
Laurent Navet
Federico Vaga
Stephen Warren
Paul Bolle
Wei Yongjun
Dan Carpenter
Stephen Rothwell