Commit Graph

195 Commits

Author SHA1 Message Date
Jeremy Kerr 80d0342859 selftests: add a simple doc
This change adds a little documentation to the tests under
tools/testing/selftests/, based on akpm's explanation.

[akpm@linux-foundation.org: move from Documentation to tools/testing/selftests/README.txt]
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Andrew Morton 66a01b9659 tools/testing/selftests/Makefile: rearrange targets
Do it one-per-line to reduce patch conflict pain.

Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Jeremy Kerr d974f67a52 selftests/efivarfs: add create-read test
Test that reads from a newly-created efivarfs file (with no data written)
will return EOF.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Lingzhu Xiang <lxiang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Jeremy Kerr 033a1a7fe7 selftests/efivarfs: add empty file creation test
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Lingzhu Xiang <lxiang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Jeremy Kerr 455ce1c721 selftests: add tests for efivarfs
This change adds a few initial efivarfs tests to the
tools/testing/selftests directory.

The open-unlink test is based on code from Lingzhu Xiang.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Lingzhu Xiang <lxiang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Steven Rostedt (Red Hat) 7328735cbf ktest: Remove indexes from warnings check
The index of a line where a warning is tested can be returned
differently on different versions of gcc (or same version compiled
differently). That is, a tab + space can give different results. This
causes the warning check to produce a false positive. Removing the
index from the check fixes this issue.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-18 09:35:49 -05:00
Steven Rostedt (Red Hat) 4c0b67a27d ktest: Ignore warnings during reboot
The reboot just wants to get to the next kernel. But if a warning (Call
Trace) appears, the monitor will report an error, and the reboot will
think something went wrong and power cycle the box, even though we
successfully made it to the next kernel.

Ignore warnings during the reboot until we get to the next kernel. It
will still timeout if we never get to the next kernel and then a power
cycle will happen. That's what we want it to do.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-05 10:02:37 -05:00
Steven Rostedt (Red Hat) d684553623 ktest: Search for linux banner for successful reboot
Sometimes when a test kernel passed fine, but on reboot it crashed,
ktest could get stuck and not proceed. This would be frustrating if you
let a test run overnight to find out the next morning that it was stuck
on the first test.

To fix this, I made reboot check for the REBOOT_SUCCESS_LINE. If the
line was not detected, then it would power cycle the box.

What it didn't cover was if the REBOOT_SUCCESS_LINE wasn't defined or if
a 'good' kernel did not display the line. Instead have it search for the
Linux banner "Linux version". The reboot just needs to get to the start
of the next kernel, it does not need to test if the next kernel makes it
to a boot prompt.

After we find the next kernel has booted, then we just wait for either
the REBOOT_SUCCESS_LINE to appear or the timeout.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-05 10:00:20 -05:00
Steven Rostedt (Red Hat) 4283b169ab ktest: Add make_warnings_file and process full warnings
Although the patchcheck test checks for warnings in the files that were
changed, this check does not catch warnings that were caused by header
file changes and the warnings appear in C files not touched by the
commit.

Add a new option called WARNINGS_FILE. If this option is set, then the
file it points to is read before bulid, and the file should contain a
list of known warnings. If a warning appears in the build, this file is
checked, and if the warning does not exist in this file, then it fails
the build showing the new warning.

If the WARNINGS_FILE points to a file that does not exist, this will
cause any warning in the build to fail.

A new test is also added called "make_warnings_file". This test will
create do a build and record any warnings it finds into the
WARNINGS_FILE. This test is something that can be run before other tests
to build a warnings file of "known warnings", ie, warnings that were
there before your changes.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-31 10:24:56 -05:00
Steven Rostedt (Red Hat) 04262be3db ktest: Allow a test option to use its default option
Options are allowed to use other options, for example:

  LOG_FILE = ${OUTPUT_DIR}/${MACHINE}.log

where the option LOG_FILE used the options OUTPUT_DIR and MACHINE.

But if a test option were to use a default option, it will not get
substituted:

  OUTPUT_DIR = ${THIS_DIR}/${MACHINE}

  TEST_START
  OUTPUT_DIR = ${OUTPUT_DIR}/t1

For the above test, OUTPUT_DIR will stay literally "${OUTPUT_DIR}/t1"
and not be converted to "${THIS_DIR}/${MACHINE}/t1". When the test runs,
it will pass the ${OUTPUT_DIR} to the shell, which would probaly
interpret it as "", and the output directory will end up as "/t1".

Change the code where if a test option has its own option name in
its defined field, and a default option exists, then substitute the
default option in its place.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-31 10:24:53 -05:00
Steven Rostedt (Red Hat) 35275685bf ktest: Strip off '\n' when reading which files were modified
The patchcheck test looks at what files are modified for each patch it
checks and makes sure that those files do not produce any warnings.

Unfortunately, when it read the diffstat, the newlines were added on the
files and this made compares miss warnings, and commits that should not
have passed, ktest let pass.

Fix this by using the perl command "chomp" that strips off whitespace at
the end of lines.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-30 12:28:15 -05:00
Steven Rostedt (Red Hat) 319ab14f05 ktest: Do not require CONSOLE for build or install bisects
If the user is doing a build or install bisect, there's no reason to
have them define CONSOLE, as the console does not need to be read. The
console only needs to be read for boot tests.

CONSOLE is not required for normal build or install tests, let's not
require it for bisect tests with BISECT_TYPE of build or install.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-30 12:25:38 -05:00
Stanislav Kinsbursky 3a665531a3 selftests: IPC message queue copy feature test
This test can be used to check wheither kernel supports IPC message queue
copy and restore features (required by CRIU project).

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-04 16:11:45 -08:00
Dave Jones 2bf1cbf1c6 tools/testing/selftests/kcmp/kcmp_test.c: print reason for failure in kcmp_test
I was curious why sys_kcmp wasn't working, which led me to the testcase.
It turned out I hadn't enabled CHECKPOINT_RESTORE in the kernel I was
testing.  Add a decoding of errno to the testcase to make that obvious.

Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:27 -08:00
Dave Young 5a55f8bb2d breakpoint selftests: print failure status instead of cause make error
In case breakpoint test exit non zero value it will cause make error.
Better way is just print the test failure status.

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:27 -08:00
Dave Young ed8ad10c3b kcmp selftests: print fail status instead of cause make error
In case kcmp_test exit non zero value it will cause make error.
Better way is just print the test failure status.

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:27 -08:00
Dave Young 63d233673a kcmp selftests: make run_tests fix
make run_tests need the target is run_tests instead of run-tests
Also gcc output should be kcmp_test. Fix these two issues.

Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:27 -08:00
Dave Young aabccae6e9 mem-hotplug selftests: print failure status instead of cause make error
Original behavior:
  bash-4.1$ make -C memory-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'
  ./on-off-test.sh
  make: execvp: ./on-off-test.sh: Permission denied
  make: *** [run_tests] Error 127
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'

After applying the patch:
  bash-4.1$ make -C memory-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'
  /bin/sh: ./on-off-test.sh: Permission denied
  memory-hotplug selftests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:27 -08:00
Dave Young a58130ddc8 cpu-hotplug selftests: print failure status instead of cause make error
Original behavior:
  bash-4.1$ make -C cpu-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'
  ./on-off-test.sh
  make: execvp: ./on-off-test.sh: Permission denied
  make: *** [run_tests] Error 127
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'

After applying the patch:
  bash-4.1$ make -C cpu-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'
  /bin/sh: ./on-off-test.sh: Permission denied
  cpu-hotplug selftests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:27 -08:00
Dave Young 9ed1d90ed1 mqueue selftests: print failure status instead of cause make error
Original behavior:
  bash-4.1$ make -C mqueue run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'
  ./mq_open_tests /test1
  Not running as root, but almost all tests require root in order to modify
  system settings.  Exiting.
  make: *** [run_tests] Error 1
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'

After applying the patch:
  bash-4.1$ make -C mqueue run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'
  Not running as root, but almost all tests require root in order to modify
  system settings.  Exiting.
  mq_open_tests: [FAIL]
  Not running as root, but almost all tests require root in order to modify
  system settings.  Exiting.
  mq_perf_tests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:26 -08:00
Dave Young 000e06b01f vm selftests: print failure status instead of cause make error
Original behavior:
  bash-4.1$ make -C vm run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'
  /bin/sh ./run_vmtests
  ./run_vmtests: line 24: /proc/sys/vm/nr_hugepages: Permission denied
  Please run this test as root
  make: *** [run_tests] Error 1
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'

After applying the patch:
  bash-4.1$ make -C vm run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'
  ./run_vmtests: line 24: /proc/sys/vm/nr_hugepages: Permission denied
  Please run this test as root
  vmtests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'

Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:26 -08:00
Linus Torvalds e05a1c6397 ktest update for v3.8
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJQyQEHAAoJEOdOSU1xswtMLPAH/0KmJ92GDwc7fJ2Q+H1Vfio2
 nIqucSESNRvJ2m48cN39ZlXB3NLOEwIRxcD9ISkx+S9Jlvu4GlQmpd8P65n7u5Ll
 7LnH+G/crKPo2uHPnT1FFi40zFiicY0SobtBxu8ouXoNL7M68hlbczvmUh/veBUh
 rUmaUgio2K6/NUeYdztV15mEgpAuZ41NYp9OsO8g44AI+pWv9OigAVP/qN+1BFzJ
 IK0rqZgooAzMgV7Px+y4uegjBuC5UQYbde5XcDQVNUc8gLudedSg2LPg2IOtl/cp
 JsyePL2/7C8y5lfA9p1bVHUUD9VTdNoLJbUd8SiLeV7+TFl6xPVl8fBd2el3ZVI=
 =kM0o
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest update from Steven Rostedt:
 "fixes and updated for new boot loaders"

* tag 'ktest-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Test if target machine is up before install
  ktest: Fix breakage from change of oldnoconfig to olddefconfig
  ktest: Add native support for syslinux boot loader
  ktest: Sync before reboot
  ktest: Add support for grub2
2012-12-13 18:03:21 -08:00
Steven Rostedt e1a6c3d748 ktest: Test if target machine is up before install
Sometimes a test kernel will crash or hang on reboot (this is even more
apparent when testing a config without CGROUPS on a box running
systemd). When this happens, on the next iteration of installing a
kernel, ktest will fail when it tries to install.

Have ktest do a check to see if the target can be connected to via ssh
before it tries to install. If it can't connect, then reboot again.
This time the reboot will fail because it can't connect and will force a
power cycle.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11 21:19:41 -05:00
Steven Rostedt 1892517056 ktest: Fix breakage from change of oldnoconfig to olddefconfig
Commit fb16d891 "kconfig: replace 'oldnoconfig' with 'olddefconfig', and
keep the old name", changed ktest's default config update from
oldnoconfig to olddefconfig without adding oldnoconfig as a backup.
The make oldnoconfig works much better than its backup of:
   yes '' | make oldconfig

But due to this change, and the fact that ktest is used to build lots of
older kernels (and for bisects), it forgoes the oldnoconfig completely.

Cc: Adam Lee <adam8157@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11 20:23:22 -05:00
Andi Kleen fcc1f2d5dd selftests: add a test program for variable huge page sizes in mmap/shmget
Also remove -Wextra because gcc-4.6 emits lots of irritating
signed/unsigned comparison warnings.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:25 -08:00
Steven Rostedt 7786954c95 ktest: Add native support for syslinux boot loader
I installed Fedora 17 which no longer supports grub v1. I worked
with grub2 for a while, but there's so many issues with it and automated
rebooting, that I decided to switch to syslinux. Instead of using
the REBOOT_SCRIPT and add customized changes to get syslinux booted,
I thought it better to make ktest aware of syslinux and add options
to simplify the use of syslinux on a target test box.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11 18:18:46 -05:00
Steven Rostedt a496872212 ktest: Sync before reboot
Before rebooting the target, run the sync command, as it seems that
either Grub2 or systemd gets screwed up if you update to reboot a kernel
once and do a reboot without doing a sync.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11 14:59:05 -05:00
Steven Rostedt a15ba91361 ktest: Add support for grub2
As only grub or 'script' is supported for rebooting to a new kernel,
and Fedora 17 has dropped support for grub, I decided to add grub2
support as well (I also plan on adding syslinux/extlinux support too).

The options GRUB_FILE and GRUB_REBOOT were added to allow the user
to specify where to find the grub.cfg and what tool to use to reboot
into the next kernel respectively.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-13 14:30:37 -05:00
Andrew Morton a80a6b85b4 revert "epoll: support for disabling items, and a self-test app"
Revert commit 03a7beb55b ("epoll: support for disabling items, and a
self-test app") pending resolution of the issues identified by Michael
Kerrisk, copied below.

We'll revisit this for 3.8.

: I've taken a look at this patch as it currently stands in 3.7-rc1, and
: done a bit of testing. (By the way, the test program
: tools/testing/selftests/epoll/test_epoll.c does not compile...)
:
: There are one or two places where the behavior seems a little strange,
: so I have a question or two at the end of this mail. But other than
: that, I want to check my understanding so that the interface can be
: correctly documented.
:
: Just to go though my understanding, the problem is the following
: scenario in a multithreaded application:
:
: 1. Multiple threads are performing epoll_wait() operations,
:    and maintaining a user-space cache that contains information
:    corresponding to each file descriptor being monitored by
:    epoll_wait().
:
: 2. At some point, a thread wants to delete (EPOLL_CTL_DEL)
:    a file descriptor from the epoll interest list, and
:    delete the corresponding record from the user-space cache.
:
: 3. The problem with (2) is that some other thread may have
:    previously done an epoll_wait() that retrieved information
:    about the fd in question, and may be in the middle of using
:    information in the cache that relates to that fd. Thus,
:    there is a potential race.
:
: 4. The race can't solved purely in user space, because doing
:    so would require applying a mutex across the epoll_wait()
:    call, which would of course blow thread concurrency.
:
: Right?
:
: Your solution is the EPOLL_CTL_DISABLE operation. I want to
: confirm my understanding about how to use this flag, since
: the description that has accompanied the patches so far
: has been a bit sparse
:
: 0. In the scenario you're concerned about, deleting a file
:    descriptor means (safely) doing the following:
:    (a) Deleting the file descriptor from the epoll interest list
:        using EPOLL_CTL_DEL
:    (b) Deleting the corresponding record in the user-space cache
:
: 1. It's only meaningful to use this EPOLL_CTL_DISABLE in
:    conjunction with EPOLLONESHOT.
:
: 2. Using EPOLL_CTL_DISABLE without using EPOLLONESHOT in
:    conjunction is a logical error.
:
: 3. The correct way to code multithreaded applications using
:    EPOLL_CTL_DISABLE and EPOLLONESHOT is as follows:
:
:    a. All EPOLL_CTL_ADD and EPOLL_CTL_MOD operations should
:       should EPOLLONESHOT.
:
:    b. When a thread wants to delete a file descriptor, it
:       should do the following:
:
:       [1] Call epoll_ctl(EPOLL_CTL_DISABLE)
:       [2] If the return status from epoll_ctl(EPOLL_CTL_DISABLE)
:           was zero, then the file descriptor can be safely
:           deleted by the thread that made this call.
:       [3] If the epoll_ctl(EPOLL_CTL_DISABLE) fails with EBUSY,
:           then the descriptor is in use. In this case, the calling
:           thread should set a flag in the user-space cache to
:           indicate that the thread that is using the descriptor
:           should perform the deletion operation.
:
: Is all of the above correct?
:
: The implementation depends on checking on whether
: (events & ~EP_PRIVATE_BITS) == 0
: This replies on the fact that EPOLL_CTL_AD and EPOLL_CTL_MOD always
: set EPOLLHUP and EPOLLERR in the 'events' mask, and EPOLLONESHOT
: causes those flags (as well as all others in ~EP_PRIVATE_BITS) to be
: cleared.
:
: A corollary to the previous paragraph is that using EPOLL_CTL_DISABLE
: is only useful in conjunction with EPOLLONESHOT. However, as things
: stand, one can use EPOLL_CTL_DISABLE on a file descriptor that does
: not have EPOLLONESHOT set in 'events' This results in the following
: (slightly surprising) behavior:
:
: (a) The first call to epoll_ctl(EPOLL_CTL_DISABLE) returns 0
:     (the indicator that the file descriptor can be safely deleted).
: (b) The next call to epoll_ctl(EPOLL_CTL_DISABLE) fails with EBUSY.
:
: This doesn't seem particularly useful, and in fact is probably an
: indication that the user made a logic error: they should only be using
: epoll_ctl(EPOLL_CTL_DISABLE) on a file descriptor for which
: EPOLLONESHOT was set in 'events'. If that is correct, then would it
: not make sense to return an error to user space for this case?

Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: "Paton J. Lewis" <palewis@adobe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-09 06:41:46 +01:00
Linus Torvalds 5a5210c6ad With the v3.7-rc2 kernel, the network cards on my target boxes
were not being brought up. I found that the modules for the
 network was not being installed. This was due to the config
 CONFIG_MODULES_USE_ELF_RELA that came before CONFIG_MODULES, and
 confused ktest in thinking that CONFIG_MODULES=y was not found.
 
 Ktest needs to test all configs and not just stop if something starts
 with CONFIG_MODULES.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJQig8hAAoJEOdOSU1xswtMkFgIALLcnba79RHsPdGCTX247Hcg
 UdteytZgyd1XayDSPLOVAR5f1vJeZ/6/L5dwWqZpf+j6wUTBwdUTc4DlBwHNpi8V
 XDKbwAYWAQp4BVaQkKcrxKZZepE791NWxCelG7T7S0d7jIkwFTA4BhT4+8+QFztZ
 H5IDL+HA73Jvehfv3gpJW6yDQ/QSyUjIK4QCsJS+wodB9nDzhAEiZ6ZKflSXFGq4
 J+Fl/UfRfnA+j0aP75ecL7hewfdiLOmK67vKvW3l8wZ7s0y3NnIsxymmaa6sTIAQ
 lIAsmSPdqOzXExIKLBHnsHCog6UW4a91MmEqM05IDpt+AcCnwDbk4EfbJEXa8ug=
 =vl1t
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest confusion fix from Steven Rostedt:
 "With the v3.7-rc2 kernel, the network cards on my target boxes were
  not being brought up.

  I found that the modules for the network was not being installed.
  This was due to the config CONFIG_MODULES_USE_ELF_RELA that came
  before CONFIG_MODULES, and confused ktest in thinking that
  CONFIG_MODULES=y was not found.

  Ktest needs to test all configs and not just stop if something starts
  with CONFIG_MODULES."

* tag 'ktest-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Fix ktest confusion with CONFIG_MODULES_USE_ELF_RELA
2012-10-28 11:14:52 -07:00
Steven Rostedt 8bc5e4ea3e ktest: Fix ktest confusion with CONFIG_MODULES_USE_ELF_RELA
In order to decide if ktest should bother installing modules on the
target box, it checks if the config file has CONFIG_MODULES=y. But it
also checks if the '=y' part exists. It only will install modules if the
config exists and is set with '=y'. But as the regex that was used
tests:

  /^CONFIG_MODULES(=y)?/

this will also match:

  CONFIG_MODULES_USE_ELF_RELA

as the '=y' part was optional and it did not test the rest of the line.
When this happens, ktest will stop checking the rest of the configs but
it will also think that no modules are needed to be installed. What it
should do is only jump out of the loop if it actually found a
CONFIG_MODULES that is set to true.

Otherwise, ktest wont install the necessary modules needed for proper
booting of the test target.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-26 00:10:32 -04:00
Daniel Hazelton fc314d0a4a tools/testing/selftests/epoll/test_epoll.c: fix build
Latest Linus head run of "make selftests" in the tools directory failed
with references to undefined variables.  Reference was to
'write_thread_data' which is the name of a struct that is being used, not
the variable itself.  Change reference so it points to the variable.

Signed-off-by: Daniel Hazelton <dshadowwolf@gmail.com>
Cc: "Paton J. Lewis" <palewis@adobe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-25 14:37:53 -07:00
Linus Torvalds 35e9a274fd Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig changes from Michal Marek:
 "kconfig in v3.7 is going to
   - initialize ncurses only once in menuconfig
   - be able to jump to a search result in menuconfig
   - change the misnomer oldnoconfig to a more meaningful name
     olddefconfig, keeping the old name as alias"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: replace 'oldnoconfig' with 'olddefconfig', and keep the old name as an alias
  menuconfig: Assign jump keys per-page instead of globally
  menuconfig: Do not open code textbox scroll up/down
  menuconfig: Add jump keys to search results
  menuconfig: Extend dialog_textbox so that it can return to a scrolled position
  menuconfig: Extend dialog_textbox so that it can exit on arbitrary keypresses
  menuconfig: Remove superfluous conditionnal
  kconfig: document oldnoconfig to what it really does in conf.c
  kconfig/mconf.c: revision of curses initialization.
2012-10-12 10:28:52 +09:00
Paton J. Lewis 03a7beb55b epoll: support for disabling items, and a self-test app
Enhanced epoll_ctl to support EPOLL_CTL_DISABLE, which disables an epoll
item.  If epoll_ctl doesn't return -EBUSY in this case, it is then safe to
delete the epoll item in a multi-threaded environment.  Also added a new
test_epoll self- test app to both demonstrate the need for this feature
and test it.

Signed-off-by: Paton J. Lewis <palewis@adobe.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Holland <pholland@adobe.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:00 +09:00
Linus Torvalds 6977b4c773 ktest update for v3.7
Fix parsing of ELSE IF in reading config file.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJQaZ0mAAoJEOdOSU1xswtMVzsIAIXFrMbOkDyo3brW0IVv3z1x
 EnZ6NPzIoEnQbAsiLT52tFJH3+C+c7vjKrEQx8OxsDaElv+pAuR9TOPJlxoGBd21
 wzQNXtdxDcGQKgWvOn/9ebkBAFe4GnWSWZc+LykI8QioQAitSIJfTu38a4Dyu2pG
 KZqpd+LHDeE+N5jg/tmT3sVCYOmR6Oui9rzqkhkVoGNlNZ6Q3ndPAAcv6A4lf7z8
 4UOAp/B8f6wbJblMPCjwcle1rMk6gfQ7Kcbli/Xm7U7cBwNhv/HJwWk9Zh/LrUjM
 3RVWJ1mXNVp0cTTKfAHrAWEWgm+vJtIkItnSWkkJnU3qwYltE0vs/CwIHOkeAFc=
 =lE0h
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest fix from Steven Rostedt:
 "ktest has one fix needed for this merge window - fix parsing of ELSE
  IF in reading config file"

* tag 'ktest-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Fix ELSE IF statements
2012-10-01 10:13:47 -07:00
Linus Torvalds 99dbb1632f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull the trivial tree from Jiri Kosina:
 "Tiny usual fixes all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  doc: fix old config name of kprobetrace
  fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
  btrfs: fix the commment for the action flags in delayed-ref.h
  btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
  vfs: fix kerneldoc for generic_fh_to_parent()
  treewide: fix comment/printk/variable typos
  ipr: fix small coding style issues
  doc: fix broken utf8 encoding
  nfs: comment fix
  platform/x86: fix asus_laptop.wled_type module parameter
  mfd: printk/comment fixes
  doc: getdelays.c: remember to close() socket on error in create_nl_socket()
  doc: aliasing-test: close fd on write error
  mmc: fix comment typos
  dma: fix comments
  spi: fix comment/printk typos in spi
  Coccinelle: fix typo in memdup_user.cocci
  tmiofb: missing NULL pointer checks
  tools: perf: Fix typo in tools/perf
  tools/testing: fix comment / output typos
  ...
2012-10-01 09:06:36 -07:00
Adam Lee fb16d8912d kconfig: replace 'oldnoconfig' with 'olddefconfig', and keep the old name as an alias
As 67d34a6a39 said, 'oldnoconfig' doesn't
set new symbols to 'n', but instead sets it to their default values.

So, this patch replaces 'oldnoconfig' with 'olddefconfig', stop making
people confused, and keep the old name 'oldnoconfig' as an alias,
because people already are dependent on its behavior with the
counter-intuitive name.

Signed-off-by: Adam Lee <adam8157@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-09-27 18:18:07 +02:00
Steven Rostedt 95f5783841 ktest: Fix ELSE IF statements
The ELSE IF statements do not work as expected if another ELSE statement
follows. This is because the $if_set is not set. If the ELSE IF
condition is true, the following ELSE should be ignored. But because the
$if_set is not set, the following ELSE will also be executed.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-09-26 14:48:17 -04:00
Masanari Iida ce8283d56c tools/testing: fix comment / output typos
Correct spelling typo in tools/testing

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-01 08:48:19 -07:00
Akinobu Mita d6b09e754c fault-injection: fix failcmd.sh warning
"fault-injection: add tool to run command with failslab or
fail_page_alloc" added tools/testing/fault-injection/failcmd.sh to make it
easier to inject slab/page allocation failures by fault injection.

failcmd.sh prints the following warning when running with arguments
for command.

	# ./failcmd.sh echo aaa
	failcmd.sh: line 209: [: echo: binary operator expected
	aaa

This warning is caused by an improper check whether at least one
parameter is left after parsing command options.

Fix it by testing the length of $1 instead of $@

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:38 -07:00
Linus Torvalds 27c1ee3f92 Merge branch 'akpm' (Andrew's patch-bomb)
Merge Andrew's first set of patches:
 "Non-MM patches:

   - lots of misc bits

   - tree-wide have_clk() cleanups

   - quite a lot of printk tweaks.  I draw your attention to "printk:
     convert the format for KERN_<LEVEL> to a 2 byte pattern" which
     looks a bit scary.  But afaict it's solid.

   - backlight updates

   - lib/ feature work (notably the addition and use of memweight())

   - checkpatch updates

   - rtc updates

   - nilfs updates

   - fatfs updates (partial, still waiting for acks)

   - kdump, proc, fork, IPC, sysctl, taskstats, pps, etc

   - new fault-injection feature work"

* Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
  drivers/misc/lkdtm.c: fix missing allocation failure check
  lib/scatterlist: do not re-write gfp_flags in __sg_alloc_table()
  fault-injection: add tool to run command with failslab or fail_page_alloc
  fault-injection: add selftests for cpu and memory hotplug
  powerpc: pSeries reconfig notifier error injection module
  memory: memory notifier error injection module
  PM: PM notifier error injection module
  cpu: rewrite cpu-notifier-error-inject module
  fault-injection: notifier error injection
  c/r: fcntl: add F_GETOWNER_UIDS option
  resource: make sure requested range is included in the root range
  include/linux/aio.h: cpp->C conversions
  fs: cachefiles: add support for large files in filesystem caching
  pps: return PTR_ERR on error in device_create
  taskstats: check nla_reserve() return
  sysctl: suppress kmemleak messages
  ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION
  ipc: compat: use signed size_t types for msgsnd and msgrcv
  ipc: allow compat IPC version field parsing if !ARCH_WANT_OLD_COMPAT_IPC
  ipc: add COMPAT_SHMLBA support
  ...
2012-07-30 17:25:34 -07:00
Akinobu Mita c24aa64d16 fault-injection: add tool to run command with failslab or fail_page_alloc
This adds tools/testing/fault-injection/failcmd.sh to run a command while
injecting slab/page allocation failures via fault injection.

Example:

Run a command "make -C tools/testing/selftests/ run_tests" with
injecting slab allocation failure.

	# ./tools/testing/fault-injection/failcmd.sh \
		-- make -C tools/testing/selftests/ run_tests

Same as above except to specify 100 times failures at most instead of
one time at most by default.

	# ./tools/testing/fault-injection/failcmd.sh --times=100 \
		-- make -C tools/testing/selftests/ run_tests

Same as above except to inject page allocation failure instead of slab
allocation failure.

	# env FAILCMD_TYPE=fail_page_alloc \
		./tools/testing/fault-injection/failcmd.sh --times=100 \
		-- make -C tools/testing/selftests/ run_tests

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:22 -07:00
Akinobu Mita d89dffa976 fault-injection: add selftests for cpu and memory hotplug
This adds two selftests

* tools/testing/selftests/cpu-hotplug/on-off-test.sh is testing script
for CPU hotplug

1. Online all hot-pluggable CPUs
2. Offline all hot-pluggable CPUs
3. Online all hot-pluggable CPUs again
4. Exit if cpu-notifier-error-inject.ko is not available
5. Offline all hot-pluggable CPUs in preparation for testing
6. Test CPU hot-add error handling by injecting notifier errors
7. Online all hot-pluggable CPUs in preparation for testing
8. Test CPU hot-remove error handling by injecting notifier errors

* tools/testing/selftests/memory-hotplug/on-off-test.sh is doing the
similar thing for memory hotplug.

1. Online all hot-pluggable memory
2. Offline 10% of hot-pluggable memory
3. Online all hot-pluggable memory again
4. Exit if memory-notifier-error-inject.ko is not available
5. Offline 10% of hot-pluggable memory in preparation for testing
6. Test memory hot-add error handling by injecting notifier errors
7. Online all hot-pluggable memory in preparation for testing
8. Test memory hot-remove error handling by injecting notifier errors

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:22 -07:00
Steven Rostedt 8fddbe9bbf ktest: Allow perl regex expressions in conditional statements
Add '=~' and '!~' to the list of allowed conditionals for DEFAULT and
TEST_START section if statements.

ie.

 TEST_START IF TEST =~ .*test$

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-30 14:37:01 -04:00
Steven Rostedt 9b1d367dbb ktest: Ignore errors it tests if IGNORE_ERRORS is set
The option IGNORE_ERRORS is used to allow a test to succeed even if a
warning appears from the kernel. Sometimes kernels will produce warnings
that are not associated with a test, and the user wants to test
something else.

The IGNORE_ERRORS works for boot up, but was not preventing test runs to
succeed if the kernel produced a warning.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-30 14:33:55 -04:00
Steven Rostedt c1434dcc57 ktest: Reset saved min (force) configs for each test
The min configs are saved in a perl hash called force_configs, and this
hash is used to add configs to the .config file. But it was not being
reset between tests and a min config from a previous test would affect
the min config of the next test causing undesirable results.

Reset the force_config hash at the start of each test.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-20 22:39:16 -04:00
Steven Rostedt 8a80c72711 ktest: Add check for bug or panic during reboot
Usually the target is booted into a dependable kernel when a test
starts. The test will install the test kernel and reboot the box. But
there may be a time that the kernel is running an unreliable kernel and
the reboot may crash.

Have ktest detect crashes on a reboot and force a power-cycle instead.

This can usually happen if a test kernel was installed to run manual
tests, but the user forgot to reboot to the known good kernel.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 16:11:21 -04:00
Steven Rostedt 407b95b7a0 ktest: Add MAX_MONITOR_WAIT option
If the console is constantly outputting content, this can cause ktest
to get stuck waiting on the monitor to settle down.

The option MAX_MONITOR_WAIT is the maximum time (in seconds) for ktest
to wait for the console to flush.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 16:05:42 -04:00
Steven Rostedt cf79fab676 ktest: Fix config bisect with how make oldnoconfig works
With a name like 'oldnoconfig' one may think that the config generated
would disable all configs that were not defined (selecting "no" for all
options). But this is not the case. It selects the default. If a config
has a 'default y', then it is added if not specified.

This broke the config bisect, because options not specified by a config
will just use the default, where it expected to turn off. This caused an
option to be enabled that disabled an option that would break the build.
The end result was that we never found the bad config at the end of the
test.

Instead of using 'make oldnoconfig', ktest now builds the options it
expects enabled and disabled. When it turns off an option, it will no
longer remove it, but actually set it to:

 # CONFIG_FOO is not set.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 15:29:43 -04:00
Steven Rostedt b091861254 ktest: Add CONFIG_BISECT_CHECK option
The config-bisect can take a bad config and bisect it down to find out
what config actually breaks the config. But as all tests will apply a
minconfig (defined by a user) to apply before booting, it is possible
that the minconfig could actually make the bad config work (minconfigs
can disable configs). The end result is that the config bisect test will
not find a config that breaks. This can be rather frustrating to the
user.

The CONFIG_BISECT_CHECK option, when set to 1, will make sure that the
bad config (with the minconfig applied) still fails before trying to
bisect.

And yes, I did get burned by this.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 15:26:00 -04:00