Commit Graph

3386 Commits

Author SHA1 Message Date
Mark Brown 2fbef66e14 Merge remote-tracking branches 'spi/fix/dt', 'spi/fix/fsl-dspi' and 'spi/fix/fsl-espi' into spi-linus 2016-10-29 12:51:55 -06:00
Yuan Yao 5ee67b587a spi: dspi: clear SPI_SR before enable interrupt
Once dspi is used in uboot, the SPI_SR have been set by some value.
At this time, if kernel enable the interrupt before clear the
status flag, that will trigger the wrong interrupt.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-29 12:51:29 -06:00
Arnd Bergmann 5c0ba57744 spi: fsl-espi: avoid processing uninitalized data on error
When we get a spurious interrupt in fsl_espi_irq, we end up
processing four uninitalized bytes of data, as shown in this
warning message:

   drivers/spi/spi-fsl-espi.c: In function 'fsl_espi_irq':
   drivers/spi/spi-fsl-espi.c:462:4: warning: 'rx_data' may be used uninitialized in this function [-Wmaybe-uninitialized]

This adds another check so we skip the data in this case.

Fixes: 6319a68011 ("spi/fsl-espi: avoid infinite loops on fsl_espi_cpu_irq()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2016-10-26 11:14:52 +01:00
Ralf Ramsauer e0af98a7e0 spi: mark device nodes only in case of successful instantiation
Instantiated SPI device nodes are marked with OF_POPULATE. This was
introduced in bd6c164. On unloading, loaded device nodes will of course
be unmarked. The problem are nodes that fail during initialisation: If a
node fails, it won't be unloaded and hence not be unmarked.

If a SPI driver module is unloaded and reloaded, it will skip nodes that
failed before.

Skip device nodes that are already populated and mark them only in case
of success.

Note that the same issue exists for I2C.

Fixes: bd6c164 ("spi: Mark instantiated device nodes with OF_POPULATE")
Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2016-10-24 18:29:33 +01:00
Petr Mladek 3989144f86 kthread: kthread worker API cleanup
A good practice is to prefix the names of functions by the name
of the subsystem.

The kthread worker API is a mix of classic kthreads and workqueues.  Each
worker has a dedicated kthread.  It runs a generic function that process
queued works.  It is implemented as part of the kthread subsystem.

This patch renames the existing kthread worker API to use
the corresponding name from the workqueues API prefixed by
kthread_:

__init_kthread_worker()		-> __kthread_init_worker()
init_kthread_worker()		-> kthread_init_worker()
init_kthread_work()		-> kthread_init_work()
insert_kthread_work()		-> kthread_insert_work()
queue_kthread_work()		-> kthread_queue_work()
flush_kthread_work()		-> kthread_flush_work()
flush_kthread_worker()		-> kthread_flush_worker()

Note that the names of DEFINE_KTHREAD_WORK*() macros stay
as they are. It is common that the "DEFINE_" prefix has
precedence over the subsystem names.

Note that INIT() macros and init() functions use different
naming scheme. There is no good solution. There are several
reasons for this solution:

  + "init" in the function names stands for the verb "initialize"
    aka "initialize worker". While "INIT" in the macro names
    stands for the noun "INITIALIZER" aka "worker initializer".

  + INIT() macros are used only in DEFINE() macros

  + init() functions are used close to the other kthread()
    functions. It looks much better if all the functions
    use the same scheme.

  + There will be also kthread_destroy_worker() that will
    be used close to kthread_cancel_work(). It is related
    to the init() function. Again it looks better if all
    functions use the same naming scheme.

  + there are several precedents for such init() function
    names, e.g. amd_iommu_init_device(), free_area_init_node(),
    jump_label_init_type(),  regmap_init_mmio_clk(),

  + It is not an argument but it was inconsistent even before.

[arnd@arndb.de: fix linux-next merge conflict]
 Link: http://lkml.kernel.org/r/20160908135724.1311726-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/1470754545-17632-3-git-send-email-pmladek@suse.com
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:33 -07:00
Mark Brown 2ce0468433 Merge remote-tracking branches 'spi/topic/ti-qspi', 'spi/topic/tools', 'spi/topic/txx9' and 'spi/topic/xlp' into spi-next 2016-09-30 09:14:22 -07:00
Mark Brown 3424ff29a0 Merge remote-tracking branches 'spi/topic/rspi', 'spi/topic/sc18is602', 'spi/topic/sh-msiof', 'spi/topic/spidev-test' and 'spi/topic/st-ssc4' into spi-next 2016-09-30 09:14:18 -07:00
Mark Brown 66b5a337d0 Merge remote-tracking branches 'spi/topic/octeon', 'spi/topic/pic32-sqi', 'spi/topic/pxa2xx' and 'spi/topic/qup' into spi-next 2016-09-30 09:14:14 -07:00
Mark Brown e2df04ed3b Merge remote-tracking branches 'spi/topic/fsl-espi', 'spi/topic/imx', 'spi/topic/jcore', 'spi/topic/loopback' and 'spi/topic/meson' into spi-next 2016-09-30 09:14:10 -07:00
Mark Brown a931a189d4 Merge remote-tracking branches 'spi/topic/bcm', 'spi/topic/dw' and 'spi/topic/fsl-dspi' into spi-next 2016-09-30 09:14:08 -07:00
Mark Brown c5aee51b7a Merge remote-tracking branch 'spi/topic/dma' into spi-next 2016-09-30 09:14:07 -07:00
Phil Reid 76cce7e3a5 spi: sc18is602: Change gpiod_set_value to gpiod_set_value_cansleep
To avoid warning when using i2c gpio expander change call to the
cansleep variant. There should be no issue with sleeping in the
drivers probe function.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-29 11:01:36 -07:00
Mika Westerberg 089bd46d8b spi: pxa2xx: Fix build error because of missing header
Kbuild test robot reports:

  drivers/spi/spi-pxa2xx.c: In function ‘setup_cs’:
  drivers/spi/spi-pxa2xx.c:1190:20: error: implicit declaration of function ‘desc_to_gpio’
  ...

Reason for this is the fact that those functions are declared in
linux/gpio/consumer.h which is not included in the driver. Fix this by
including it.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-29 11:00:41 -07:00
Wei Yongjun 446576f9ea spi: imx: fix error return code in spi_imx_probe()
Fix to return error code -EINVAL if no CS GPIOs available
instead of 0, as done elsewhere in this function.

Fixes: f13d4e189d ("spi: imx: Gracefully handle NULL master->cs_gpios")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-28 09:50:55 -07:00
Mika Westerberg 99f499cd65 spi: pxa2xx: Add support for GPIO descriptor chip selects
The driver uses custom chip_info coming from platform data for chip selects
implemented as GPIOs. If the system lacks board files setting up the
platform data, it is not possible to use GPIOs as chip selects.

This adds support for GPIO descriptors so that regardless of the underlying
firmware interface (DT, ACPI or platform data) the driver can request GPIOs
used as chip selects and configure them accordingly.

The custom chip_info GPIO support is still left there to make sure the
existing systems keep working as expected.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-26 09:11:14 -07:00
Marek Vasut f13d4e189d spi: imx: Gracefully handle NULL master->cs_gpios
It is possible that master->cs_gpios is NULL after spi_bitbang_start(),
this happens if the master has no CS GPIOs specified in DT. Check for
this case after spi_bitbang_start() to prevent NULL pointer dereference
in the subsequent for loop, which accesses the master->cs_gpios field.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Martin Kaiser <martin@kaiser.cx>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-26 09:08:46 -07:00
Kamal Dasu cc20a38612 spi: iproc-qspi: Add Broadcom iProc SoCs support
This spi driver uses the common spi-bcm-qspi driver and implements iProc
SoCs specific interrupt controller. The common driver now calls the SoC
handlers when present. Adding support for both muxed l1 and unmuxed interrupt
sources.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24 20:03:25 +01:00
Heiner Kallweit 604042af76 spi: fsl-espi: improve return value handling in fsl_espi_probe
The return value of fsl_espi_probe (currently struct spi_master *)
is just used for checking whether an error occurred.
Change the return value type to int and simplify the code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24 19:48:32 +01:00
Heiner Kallweit acf692190f spi: fsl-espi: simplify of_fsl_espi_probe
Simplify of_fsl_espi_probe.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24 19:48:31 +01:00
Heiner Kallweit fb8ac912df spi: fsl-espi: remove unused variable in fsl_espi_setup
Remove an unused variable.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24 19:47:07 +01:00
Wei Yongjun 71b8f350a4 spi: bcm-qspi: Fix error return code in bcm_qspi_probe()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: fa236a7ef2 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-16 17:23:11 +01:00
Wei Yongjun 3bf3eb2b95 spi: bcm-qspi: Fix return value check in bcm_qspi_probe()
In case of error, the function kcalloc() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.

Fixes: fa236a7ef2 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-16 17:23:11 +01:00
Arnd Bergmann a0319f8b12 spi: bcm-qspi: fix suspend/resume #ifdef
The two power management functions are define inside of an #ifdef
but referenced unconditionally, which is obviously broken when
CONFIG_PM_SLEEP is not set:

drivers/spi/spi-bcm-qspi.c:1300:13: error: 'bcm_qspi_suspend' undeclared here (not in a function)
drivers/spi/spi-bcm-qspi.c:1301:13: error: 'bcm_qspi_resume' undeclared here (not in a function)

This replaces the #ifdef with a __maybe_unused annotation that lets
the compiler figure out whether to drop the functions itself,
and uses SIMPLE_DEV_PM_OPS() to refer to the functions.

This will also fill the freeze/thaw/poweroff/restore callback
pointers in addition to suspend/resume, but as far as I can tell,
this is what we want.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: fa236a7ef2 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-16 16:47:09 +01:00
Arnd Bergmann c0a75d072a spi: bcm-qspi: don't include linux/mtd/cfi.h
The header isn't actually needed here, but including it leads
to a build warning when CONFIG_MTD is disabled:

include/linux/mtd/cfi.h:76:2: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. [-Werror=cpp]

Fixes: fa236a7ef2 (spi: bcm-qspi: Add Broadcom MSPI driver)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-16 16:27:01 +01:00
Heiner Kallweit 81abc2ecac spi: fsl-espi: improve and extend register bit definitions
Add definition of further register bits for use in upcoming
driver extensions and improve current bit definitions:
- use BIT macro
- use bit names as in the chip spec

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:24:48 +01:00
Heiner Kallweit 46afd38b7d spi: fsl-espi: align register access with other drivers
Change register access to the method used in other drivers too.
- use register names as in the chip spec for constants
- avoid hard to read statements like
  __be32 __iomem *espi_mode = &reg_base->mode
- get rid of old powerpc-specific functions like in_8

In addition annotate reg_base in struct mpc8xxx_spi as __iomem.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:24:47 +01:00
Heiner Kallweit 35f5d71e38 spi: fsl-espi: improve and simplify interrupt handler
Simplify the interrupt handler a little. In addition don't call
fsl_espi_cpu_irq() if no event bit is set.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:24:47 +01:00
Heiner Kallweit d198ebfb75 spi: fsl-espi: simplify fsl_espi_setup_transfer
If t is not null then the SPI core takes care that bits_per_word and
speed_hz are populated. This allows to simplify fsl_espi_setup_transfer.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:24:46 +01:00
Martin Kaiser 15ca92156e spi: imx: support loopback mode on imx35
imx35 and compatible chipsets support loopback mode by setting a
loopback control bit in the test register. Make this setting available
for data transfers, similar to what we do for imx51.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:06:16 +01:00
Martin Kaiser 2636ba8fa3 spi: imx: set spi_bus_clk for mx1, mx31 and mx35
Modify spi_imx_clkdiv_2() to return the resulting bus clock frequency
when the selected clock divider is applied. Set spi_imx->spi_bus_clk to
this frequency.

If spi_bus_clk is unset, spi_imx_calculate_timeout() causes a
division by 0.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:06:11 +01:00
Kamal Dasu 4e3b2d236f spi: bcm-qspi: Add BSPI spi-nor flash controller driver
This change implements BSPI driver for Broadcom BRCMSTB, NS2,
NSP SoCs works in combination with the MSPI controller driver
and implements flash read acceleration and implements  the
spi_flash_read() method. Both MSPI and BSPI controllers are
needed to access spi-nor flash.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:03:32 +01:00
Kamal Dasu 44f95d87a6 spi: brcmstb-qspi: Broadcom settop platform driver
Adding the settop SoC platfrom driver, this driver is compatible
with the settop MSPI+BSPI and MSPI only blocks implemented on the
SoCs. Driver calls the spi-bcm-qspi probe(), remove() and pm_ops.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:03:32 +01:00
Kamal Dasu fa236a7ef2 spi: bcm-qspi: Add Broadcom MSPI driver
Master SPI driver for Broadcom settop, iProc SoCs. The driver
is used for devices that use SPI protocol on BRCMSTB, NSP, NS2
SoCs. SoC platform driver call exported porbe(), remove()
and suspend/resume pm_ops implemented in this common driver.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:03:32 +01:00
Axel Lin 4253168663 spi: st-ssc4: Fix misuse of devm_gpio_request/devm_gpio_free APIs
devm_* API is supposed to be used only in probe function call.
The resource is allocated at 'probe' and free automatically at 'remove'.
Usage of devm_* functions outside probe sometimes leads to resource leak.
Thus avoid using devm_* APIs in .setup/.cleanup callbacks.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 16:05:35 +01:00
Neil Armstrong 2f58ea64bd spi: meson: Add GXBB compatible
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:11:39 +01:00
Heiner Kallweit 38d003f1a4 spi: fsl-espi: merge fsl_espi_trans and fsl_espi_do_trans
Merge both functions to reduce source code size and improve
readability.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:03:50 +01:00
Heiner Kallweit 06af115d6c spi: fsl-espi: improve message length handling
Move checking for a zero-length message up in the call chain and
use m->frame_length instead of re-calculating the overall length
of all transfers in the message.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:03:49 +01:00
Heiner Kallweit cce7e3a2fe spi: fsl-espi: factor out handling of read data
Factor out copying read data to the read buffers in the original
message to a new function fsl_espi_copy_from_buf.
This also allows to simplify fsl_espi_copy_to_buf.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:03:49 +01:00
Heiner Kallweit 96361fafbb spi: fsl-espi: centralize populating struct spi_transfer
Better structure the code by population all elements of struct
spi_transfer in one place.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:03:49 +01:00
Heiner Kallweit d3152cf1c8 spi: fsl-espi: factor out initial message checking
Checking the message is currently done at diffrent places in the
driver. Factor it out to fsl_espi_check_message.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:03:48 +01:00
Andy Shevchenko 7c7289a404 spi: pxa2xx: Default thresholds to PXA configuration
Most of the devices in the supported list have PXA configuration of FIFO. In
particularly Intel Medfield and Merrifield have bigger FIFO, than it's defined
for CE4100.

Split CE4100 in the similar way how it was done for Intel Quark, i.e. prefix
definitions by CE4100 and append necessary pieces of code to switch case
conditions.

We are on safe side since those bits are ignored on all LPSS IPs.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:01:43 +01:00
Jarkko Nikula 96579a4e56 spi: pxa2xx: Remove pointer to chip data from driver data
Transfer state machine in this driver does not need to set/unset pointer
to chip data between queueing and finalizing message as it is not
actually used as a state info itself but just pointer passing.

Since this per SPI device specific chip data is already carried in
ctldata use that and remove pointer to chip data from driver data.

While at it, group initialized variables before uninitialized variables
in pump_transfers().

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:01:27 +01:00
Jarkko Nikula 4fc0caac06 spi: pxa2xx: Remove pointer to current SPI message from driver data
There is no need to carry pointer to current SPI message in driver data
because cur_msg in struct spi_master holds it already when driver is using
the message queueing infrastructure from the SPI core.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:01:27 +01:00
Jarkko Nikula bffc967e93 spi: pxa2xx: Do not needlessly initialize stack variables
All of these variables are unconditionally set before their use.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:01:27 +01:00
Matthias Seidel 3aef463222 spi: dw: round up result of calculation for clock divider
Avoid ending up with a higher frequency than requested

Signed-off-by: Matthias Seidel <kernel@mseidel.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:59:08 +01:00
Heiner Kallweit 5bcc6a2f06 spi: fsl-espi: merge fsl_espi_bufs and fsl_espi_cpu_bufs
fsl_espi_bufs and fsl_espi_cpu_bufs are very small that we can merge them.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:58:45 +01:00
Heiner Kallweit 84ccfc371f spi: fsl-espi: improve return value handling in fsl_espi_bufs
Return a proper status code from fsl_espi_bufs instead of returning
the number of remaining words and let the caller evaluate it.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:58:45 +01:00
Heiner Kallweit 809b1e017b spi: fsl-espi: merge fsl_espi_cmd_trans and fsl_espi_rw_trans
fsl_espi_cmd_trans and fsl_espi_rw_trans share most of the code so
we can merge them.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:58:45 +01:00
Heiner Kallweit faceef3907 spi: fsl-espi: eliminate struct fsl_espi_transfer
The remaining elements of struct fsl_espi_transfer are part of struct
spi_transfer anyway. So we can get rid of struct fsl_espi_transfer
and use a struct spi_transfer only.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:58:45 +01:00
Heiner Kallweit 5cd7b8be6b spi: fsl-espi: remove element actual_length from struct fsl_espi_trans
If an error occurs during processing the message, then we don't have
to populate the actual_length element of struct message.
So we can get rid of element actual_length in struct
fsl_espi_transfer.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:58:45 +01:00