The db->lock is a raw spinlock and so the lock hold time is supposed
to be short. This will not be the case when printk() is being involved
in some of the critical sections. In order to avoid the long hold time,
in case some messages need to be printed, the debug_object_is_on_stack()
and debug_print_object() calls are now moved out of those critical
sections.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Cc: Qian Cai <cai@gmx.us>
Cc: Zhong Jiang <zhongjiang@huawei.com>
Link: https://lkml.kernel.org/r/20190520141450.7575-6-longman@redhat.com
After a system bootup and 3 parallel kernel builds, a partial output
of the debug objects stats file was:
pool_free :5101
pool_pcp_free :4181
pool_min_free :220
pool_used :104172
pool_max_used :171920
on_free_list :0
objs_allocated:39268280
objs_freed :39160031
More than 39 millions debug objects had since been allocated and then
freed. The pool_max_used, however, was only about 172k. So this is a
lot of extra overhead in freeing and allocating objects from slabs. It
may also causes the slabs to be more fragmented and harder to reclaim.
Make the freeing of excess debug objects less aggressive by freeing them at
a maximum frequency of 10Hz and about 1k objects at each round of freeing.
With that change applied, the partial output of the debug objects stats
file after similar actions became:
pool_free :5901
pool_pcp_free :3742
pool_min_free :1022
pool_used :104805
pool_max_used :168081
on_free_list :0
objs_allocated:5796864
objs_freed :5687182
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Cc: Qian Cai <cai@gmx.us>
Cc: Zhong Jiang <zhongjiang@huawei.com>
Link: https://lkml.kernel.org/r/20190520141450.7575-5-longman@redhat.com
In fill_pool(), the pool_lock is acquired and then released once per debug
object. If many objects are to be filled, the constant lock and unlock
operations are extra overhead.
To reduce the overhead, batch them up and do an allocation of 4 objects per
lock/unlock sequence.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Cc: Qian Cai <cai@gmx.us>
Cc: Zhong Jiang <zhongjiang@huawei.com>
Link: https://lkml.kernel.org/r/20190520141450.7575-4-longman@redhat.com
Most workloads will allocate a bunch of memory objects, work on them
and then freeing all or most of them. So just having a percpu free pool
may not reduce the pool_lock contention significantly if large number
of objects are being used.
To help those situations, we are now doing lookahead allocation and
freeing of the debug objects into and out of the percpu free pool. This
will hopefully reduce the number of times the pool_lock needs to be
taken and hence its contention level.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Cc: Qian Cai <cai@gmx.us>
Cc: Zhong Jiang <zhongjiang@huawei.com>
Link: https://lkml.kernel.org/r/20190520141450.7575-3-longman@redhat.com
When a multi-threaded workload does a lot of small memory object
allocations and deallocations, it may cause the allocation and freeing of
many debug objects. This will make the global pool_lock a bottleneck in the
performance of the workload. Since interrupts are disabled when acquiring
the pool_lock, it may even cause hard lockups to happen.
To reduce contention of the global pool_lock, add a percpu debug object
free pool that can be used to buffer some of the debug object allocation
and freeing requests without acquiring the pool_lock. Each CPU will now
have a percpu free pool that can hold up to a maximum of 64 debug
objects. Allocation and freeing requests will go to the percpu free pool
first. If that fails, the pool_lock will be taken and the global free pool
will be used.
The presence or absence of obj_cache is used as a marker to see if the
percpu cache should be used.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Cc: Qian Cai <cai@gmx.us>
Cc: Zhong Jiang <zhongjiang@huawei.com>
Link: https://lkml.kernel.org/r/20190520141450.7575-2-longman@redhat.com
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Qian Cai <cai@gmx.us>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Waiman Long <longman@redhat.com>
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Cc: Zhong Jiang <zhongjiang@huawei.com>
Link: https://lkml.kernel.org/r/20190612153513.GA21082@kroah.com
The current value of the early boot static pool size, 1024 is not big
enough for systems with large number of CPUs with timer or/and workqueue
objects selected. As the results, systems have 60+ CPUs with both timer
and workqueue objects enabled could trigger "ODEBUG: Out of memory.
ODEBUG disabled".
Some debug objects are allocated during the early boot. Enabling some
options like timers or workqueue objects may increase the size required
significantly with large number of CPUs. For example,
CONFIG_DEBUG_OBJECTS_TIMERS:
No. CPUs x 2 (worker pool) objects:
start_kernel
workqueue_init_early
init_worker_pool
init_timer_key
debug_object_init
plus No. CPUs objects (CONFIG_HIGH_RES_TIMERS):
sched_init
hrtick_rq_init
hrtimer_init
CONFIG_DEBUG_OBJECTS_WORK:
No. CPUs objects:
vmalloc_init
__init_work
plus No. CPUs x 6 (workqueue) objects:
workqueue_init_early
alloc_workqueue
__alloc_workqueue_key
alloc_and_link_pwqs
init_pwq
Also, plus No. CPUs objects:
perf_event_init
__init_srcu_struct
init_srcu_struct_fields
init_srcu_struct_nodes
__init_work
However, none of the things are actually used or required before
debug_objects_mem_init() is invoked, so just move the call right before
vmalloc_init().
According to tglx, "the reason why the call is at this place in
start_kernel() is historical. It's because back in the days when
debugobjects were added the memory allocator was enabled way later than
today."
Link: http://lkml.kernel.org/r/20181126102407.1836-1-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_DEBUG_OBJECTS_RCU_HEAD does not play well with kmemleak due to
recursive calls.
fill_pool
kmemleak_ignore
make_black_object
put_object
__call_rcu (kernel/rcu/tree.c)
debug_rcu_head_queue
debug_object_activate
debug_object_init
fill_pool
kmemleak_ignore
make_black_object
...
So add SLAB_NOLEAKTRACE to kmem_cache_create() to not register newly
allocated debug objects at all.
Link: http://lkml.kernel.org/r/20181126165343.2339-1-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kmem_cache_destroy() has a built in NULL pointer check, so the one at the
call can be removed.
Signed-off-by: Zhong Jiang <zhongjiang@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <longman@redhat.com>
Cc: <arnd@arndb.de>
Cc: <yang.shi@linux.alibaba.com>
Link: https://lkml.kernel.org/r/1533054298-35824-1-git-send-email-zhongjiang@huawei.com
While debugging an issue debugobject tracking warned about an annotation
issue of an object on stack. It turned out that the issue was due to the
object in concern being on a different stack which was due to another
issue.
Thomas suggested to print the pointers and the location of the stack for
the currently running task. This helped to figure out that the object was
on the wrong stack.
As this is general useful information for debugging similar issues, make
the error message more informative by printing the pointers.
[ tglx: Massaged changelog ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: kernel-team@android.com
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: astrachan@google.com
Link: https://lkml.kernel.org/r/20180723212531.202328-1-joel@joelfernandes.org
debug_objects_maxchecked is only updated in __debug_check_no_obj_freed(),
and only read in debug_objects_maxchecked, unfortunately both of these are
optional and depend on different Kconfig symbols.
When both CONFIG_DEBUG_OBJECTS_FREE and CONFIG_DEBUG_FS are disabled this
warning is emitted:
lib/debugobjects.c:56:14: error: 'debug_objects_maxchecked' defined but not used [-Werror=unused-variable]
Rather than trying to add more complex #ifdef protections, mark the
variable as __maybe_unused so it can be silently dropped when usused.
Fixes: bd9dcd0465 ("debugobjects: Export max loops counter")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20180313131857.158876-1-arnd@arndb.de
The removal of the batched object freeing has caused the debug_objects_freed
to become read-only, and the reading is inside an ifdef, so gcc warns that it
is completely unused without CONFIG_DEBUG_FS:
lib/debugobjects.c:71:14: error: 'debug_objects_freed' defined but not used [-Werror=unused-variable]
Assuming we are still interested in this number, this adds back code to
keep track of the freed objects.
Fixes: 636e1970fd ("debugobjects: Use global free list in free_object()")
Suggested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20180222155335.1647466-1-arnd@arndb.de
__debug_check_no_obj_freed() iterates over the to be freed memory region in
chunks and iterates over the corresponding hash bucket list for each
chunk. This can accumulate to hundred thousands of checked objects. In the
worst case this can trigger the soft lockup detector:
NMI watchdog: BUG: soft lockup - CPU#15 stuck for 22s!
CPU: 15 PID: 110342 Comm: stress-ng-getde
Call Trace:
[<ffffffff8141177e>] debug_check_no_obj_freed+0x13e/0x220
[<ffffffff811f8751>] __free_pages_ok+0x1f1/0x5c0
[<ffffffff811fa785>] __free_pages+0x25/0x40
[<ffffffff812638db>] __free_slab+0x19b/0x270
[<ffffffff812639e9>] discard_slab+0x39/0x50
[<ffffffff812679f7>] __slab_free+0x207/0x270
[<ffffffff81269966>] ___cache_free+0xa6/0xb0
[<ffffffff8126c267>] qlist_free_all+0x47/0x80
[<ffffffff8126c5a9>] quarantine_reduce+0x159/0x190
[<ffffffff8126b3bf>] kasan_kmalloc+0xaf/0xc0
[<ffffffff8126b8a2>] kasan_slab_alloc+0x12/0x20
[<ffffffff81265e8a>] kmem_cache_alloc+0xfa/0x360
[<ffffffff812abc8f>] ? getname_flags+0x4f/0x1f0
[<ffffffff812abc8f>] getname_flags+0x4f/0x1f0
[<ffffffff812abe42>] getname+0x12/0x20
[<ffffffff81298da9>] do_sys_open+0xf9/0x210
[<ffffffff81298ede>] SyS_open+0x1e/0x20
[<ffffffff817d6e01>] entry_SYSCALL_64_fastpath+0x1f/0xc2
The code path might be called in either atomic or non-atomic context, but
in_atomic() can't tell if the current context is atomic or not on a
PREEMPT=n kernel, so cond_resched() can't be used to prevent the
softlockup.
Utilize the global free list to shorten the loop execution time.
[ tglx: Massaged changelog ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: longman@redhat.com
Link: https://lkml.kernel.org/r/1517872708-24207-5-git-send-email-yang.shi@linux.alibaba.com
The newly added global free list allows to avoid lengthy pool_list
iterations in free_obj_work() by putting objects either into the pool list
when the fill level of the pool is below the maximum or by putting them on
the global free list immediately.
As the pool is now guaranteed to never exceed the maximum fill level this
allows to remove the batch removal from pool list in free_obj_work().
Split free_object() into two parts, so the actual queueing function can be
reused without invoking schedule_work() on every invocation.
[ tglx: Remove the batch removal from pool list and massage changelog ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: longman@redhat.com
Link: https://lkml.kernel.org/r/1517872708-24207-4-git-send-email-yang.shi@linux.alibaba.com
free_object() adds objects to the pool list and schedules work when the
pool list is larger than the pool size. The worker handles the actual
kfree() of the object by iterating the pool list until the pool size is
below the maximum pool size again.
To iterate the pool list, pool_lock has to be held and the objects which
should be freed() need to be put into temporary storage so pool_lock can be
dropped for the actual kmem_cache_free() invocation. That's a pointless and
expensive exercise if there is a large number of objects to free.
In such a case its better to evaulate the fill level of the pool in
free_objects() and queue the object to free either in the pool list or if
it's full on a separate global free list.
The worker can then do the following simpler operation:
- Move objects back from the global free list to the pool list if the
pool list is not longer full.
- Remove the remaining objects in a single list move operation from the
global free list and do the kmem_cache_free() operation lockless from
the temporary list head.
In fill_pool() the global free list is checked as well to avoid real
allocations from the kmem cache.
Add the necessary list head and a counter for the number of objects on the
global free list and export that counter via sysfs:
max_chain :79
max_loops :8147
warnings :0
fixups :0
pool_free :1697
pool_min_free :346
pool_used :15356
pool_max_used :23933
on_free_list :39
objs_allocated:32617
objs_freed :16588
Nothing queues objects on the global free list yet. This happens in a
follow up change.
[ tglx: Simplified implementation and massaged changelog ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: longman@redhat.com
Link: https://lkml.kernel.org/r/1517872708-24207-3-git-send-email-yang.shi@linux.alibaba.com
__debug_check_no_obj_freed() can be an expensive operation depending on the
size of memory freed. It already exports the maximum chain walk length via
debugfs, but this only records the maximum of a single memory chunk.
Though there is no information about the total number of objects inspected
for a __debug_check_no_obj_freed() operation, which might be significantly
larger when a huge memory region is freed.
Aggregate the number of objects inspected for a single invocation of
__debug_check_no_obj_freed() and export it via sysfs.
The resulting output of /sys/kernel/debug/debug_objects/stats looks like:
max_chain :121
max_checked :543267
warnings :0
fixups :0
pool_free :1764
pool_min_free :341
pool_used :86438
pool_max_used :268887
objs_allocated:6068254
objs_freed :5981076
[ tglx: Renamed the variable to max_checked and adjusted changelog ]
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: longman@redhat.com
Link: https://lkml.kernel.org/r/1517872708-24207-2-git-send-email-yang.shi@linux.alibaba.com
The allocated debug objects are either on the free list or in the
hashed bucket lists. So they won't get lost. However if both debug
objects and kmemleak are enabled and kmemleak scanning is done
while some of the debug objects are transitioning from one list to
the others, false negative reporting of memory leaks may happen for
those objects. For example,
[38687.275678] kmemleak: 12 new suspected memory leaks (see
/sys/kernel/debug/kmemleak)
unreferenced object 0xffff92e98aabeb68 (size 40):
comm "ksmtuned", pid 4344, jiffies 4298403600 (age 906.430s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 d0 bc db 92 e9 92 ff ff ................
01 00 00 00 00 00 00 00 38 36 8a 61 e9 92 ff ff ........86.a....
backtrace:
[<ffffffff8fa5378a>] kmemleak_alloc+0x4a/0xa0
[<ffffffff8f47c019>] kmem_cache_alloc+0xe9/0x320
[<ffffffff8f62ed96>] __debug_object_init+0x3e6/0x400
[<ffffffff8f62ef01>] debug_object_activate+0x131/0x210
[<ffffffff8f330d9f>] __call_rcu+0x3f/0x400
[<ffffffff8f33117d>] call_rcu_sched+0x1d/0x20
[<ffffffff8f4a183c>] put_object+0x2c/0x40
[<ffffffff8f4a188c>] __delete_object+0x3c/0x50
[<ffffffff8f4a18bd>] delete_object_full+0x1d/0x20
[<ffffffff8fa535c2>] kmemleak_free+0x32/0x80
[<ffffffff8f47af07>] kmem_cache_free+0x77/0x350
[<ffffffff8f453912>] unlink_anon_vmas+0x82/0x1e0
[<ffffffff8f440341>] free_pgtables+0xa1/0x110
[<ffffffff8f44af91>] exit_mmap+0xc1/0x170
[<ffffffff8f29db60>] mmput+0x80/0x150
[<ffffffff8f2a7609>] do_exit+0x2a9/0xd20
The references in the debug objects may also hide a real memory leak.
As there is no point in having kmemleak to track debug object
allocations, kmemleak checking is now disabled for debug objects.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1502718733-8527-1-git-send-email-longman@redhat.com
We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/task_stack.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As suggested by Ingo, the debug_objects_alloc counter is now renamed to
debug_objects_allocated with minor twist in comment and debug output.
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1486503630-1501-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On a large SMP system with many CPUs, the global pool_lock may become
a performance bottleneck as all the CPUs that need to allocate or
free debug objects have to take the lock. That can sometimes cause
soft lockups like:
NMI watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [rcuos/1:21]
...
RIP: 0010:[<ffffffff817c216b>] [<ffffffff817c216b>]
_raw_spin_unlock_irqrestore+0x3b/0x60
...
Call Trace:
[<ffffffff813f40d1>] free_object+0x81/0xb0
[<ffffffff813f4f33>] debug_check_no_obj_freed+0x193/0x220
[<ffffffff81101a59>] ? trace_hardirqs_on_caller+0xf9/0x1c0
[<ffffffff81284996>] ? file_free_rcu+0x36/0x60
[<ffffffff81251712>] kmem_cache_free+0xd2/0x380
[<ffffffff81284960>] ? fput+0x90/0x90
[<ffffffff81284996>] file_free_rcu+0x36/0x60
[<ffffffff81124c23>] rcu_nocb_kthread+0x1b3/0x550
[<ffffffff81124b71>] ? rcu_nocb_kthread+0x101/0x550
[<ffffffff81124a70>] ? sync_exp_work_done.constprop.63+0x50/0x50
[<ffffffff810c59d1>] kthread+0x101/0x120
[<ffffffff81101a59>] ? trace_hardirqs_on_caller+0xf9/0x1c0
[<ffffffff817c2d32>] ret_from_fork+0x22/0x50
To reduce the amount of contention on the pool_lock, the actual
kmem_cache_free() of the debug objects will be delayed if the pool_lock
is busy. This will temporarily increase the amount of free objects
available at the free pool when the system is busy. As a result,
the number of kmem_cache allocation and freeing is reduced.
To further reduce the lock operations free debug objects in batches of
four.
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: "Du Changbin" <changbin.du@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Stancek <jstancek@redhat.com>
Link: http://lkml.kernel.org/r/1483647425-4135-4-git-send-email-longman@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On a large SMP systems with hundreds of CPUs, the current thresholds
for allocating and freeing debug objects (256 and 1024 respectively)
may not work well. This can cause a lot of needless calls to
kmem_aloc() and kmem_free() on those systems.
To alleviate this thrashing problem, the object freeing threshold
is now increased to "1024 + # of CPUs * 32". Whereas the object
allocation threshold is increased to "256 + # of CPUs * 4". That
should make the debug objects subsystem scale better with the number
of CPUs available in the system.
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: "Du Changbin" <changbin.du@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Stancek <jstancek@redhat.com>
Link: http://lkml.kernel.org/r/1483647425-4135-3-git-send-email-longman@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
New debugfs stat counters are added to track the numbers of
kmem_cache_alloc() and kmem_cache_free() function calls to get a
sense of how the internal debug objects cache management is performing.
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: "Du Changbin" <changbin.du@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Stancek <jstancek@redhat.com>
Link: http://lkml.kernel.org/r/1483647425-4135-2-git-send-email-longman@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull workqueue updates from Tejun Heo:
"Mostly patches to initialize workqueue subsystem earlier and get rid
of keventd_up().
The patches were headed for the last merge cycle but got delayed due
to a bug found late minute, which is fixed now.
Also, to help debugging, destroy_workqueue() is more chatty now on a
sanity check failure."
* 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: move wq_numa_init() to workqueue_init()
workqueue: remove keventd_up()
debugobj, workqueue: remove keventd_up() usage
slab, workqueue: remove keventd_up() usage
power, workqueue: remove keventd_up() usage
tty, workqueue: remove keventd_up() usage
mce, workqueue: remove keventd_up() usage
workqueue: make workqueue available early during boot
workqueue: dump workqueue state on sanity check failures in destroy_workqueue()
Drivers, or other modules, that use a mixture of objects (especially
objects embedded within other objects) would like to take advantage of
the debugobjects facilities to help catch misuse. Currently, the
debugobjects interface is only available to builtin drivers and requires
a set of EXPORT_SYMBOL_GPL for use by modules.
I am using the debugobjects in i915.ko to try and catch some invalid
operations on embedded objects. The problem currently only presents
itself across module unload so forcing i915 to be builtin is not an
option.
Link: http://lkml.kernel.org/r/20161122143039.6433-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Du, Changbin" <changbin.du@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that workqueue can handle work item queueing from very early
during boot, there is no need to gate schedule_work() while
!keventd_up(). Remove it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
When activating a static object we need make sure that the object is
tracked in the object tracker. If it is a non-static object then the
activation is illegal.
In previous implementation, each subsystem need take care of this in
their fixup callbacks. Actually we can put it into debugobjects core.
Thus we can save duplicated code, and have *pure* fixup callbacks.
To achieve this, a new callback "is_static_object" is introduced to let
the type specific code decide whether a object is static or not. If
yes, we take it into object tracker, otherwise give warning and invoke
fixup callback.
This change has paassed debugobjects selftest, and I also do some test
with all debugobjects supports enabled.
At last, I have a concern about the fixups that can it change the object
which is in incorrect state on fixup? Because the 'addr' may not point
to any valid object if a non-static object is not tracked. Then Change
such object can overwrite someone's memory and cause unexpected
behaviour. For example, the timer_fixup_activate bind timer to function
stub_timer.
Link: http://lkml.kernel.org/r/1462576157-14539-1-git-send-email-changbin.du@intel.com
[changbin.du@intel.com: improve code comments where invoke the new is_static_object callback]
Link: http://lkml.kernel.org/r/1462777431-8171-1-git-send-email-changbin.du@intel.com
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If debug_object_fixup() return non-zero when problem has been fixed.
But the code got it backwards, it taks 0 as fixup successfully. So fix
it.
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I am going to introduce debugobjects infrastructure to USB subsystem.
But before this, I found the code of debugobjects could be improved.
This patchset will make fixup functions return bool type instead of int.
Because fixup only need report success or no. boolean is the 'real'
type.
This patch (of 7):
The object debugging infrastructure core provides some fixup callbacks
for the subsystem who use it. These callbacks are called from the debug
code whenever a problem in debug_object_init is detected. And
debugobjects core suppose them returns 1 when the fixup was successful,
otherwise 0. So the return type is boolean.
A bad thing is that debug_object_fixup use the return value for
arithmetic operation. It confused me that what is the reall return
type.
Reading over the whole code, I found some place do use the return value
incorrectly(see next patch). So why use bool type instead?
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On my bigger s390 systems I always get "Out of memory.
ODEBUG disabled". Since the number of objects is needed at
compile time, we can not change the size dynamically before
the caches etc are available. Doubling the size seems to
do the trick. Since it is init data it will be freed anyway,
this should be ok.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: http://lkml.kernel.org/r/1453905478-13409-1-git-send-email-borntraeger@de.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Direct conversion of one KERN_DEBUG message without DEBUG definition
(suggested by Josh Triplett)
That message will now be disabled by default. (see
Documentation/CodingStyle Chapter 13)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove unnecessary work pending test before calling schedule_work(). It
has been tested in queue_work_on() already. No functional changed.
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to better respond to things like duplicate invocations
of call_rcu(), RCU needs to see the status of a call to
debug_object_activate(). This would allow RCU to leak the callback in
order to avoid adding freelist-reuse mischief to the duplicate invoations.
This commit therefore makes debug_object_activate() return status,
zero for success and -EINVAL for failure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There was a return missed in 1fda107d44 "debugobjects: Remove unused
return value from fill_pool()". It makes gcc complain:
lib/debugobjects.c: In function ‘fill_pool’:
lib/debugobjects.c:98:4: warning: ‘return’ with a value, in
function returning void [enabled by default]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://lkml.kernel.org/r/20120418112810.GA2669@elgon.mountain
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
debugobjects is now printing a warning when a fixup for a NOTAVAILABLE
object is run. This causes the selftest to fail like:
ODEBUG: selftest warnings failed 4 != 5
We could just increase the number of warnings that the selftest is
expecting to see because that is actually what has changed. But, it turns
out that fixup_activate() was written with inverted logic and thus a fixup
for a static object returned 1 indicating the object had been fixed, and 0
otherwise. Fix the logic to be correct and update the counts to reflect
that nothing needed fixing for a static object.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Calling del_timer_sync() on an uninitialized timer leads to a
never ending loop in lock_timer_base() that spins checking for a
non-NULL timer base. Add an assertion to debugobjects to catch
usage of uninitialized objects so that we can initialize timers
in the del_timer_sync() path before it calls lock_timer_base().
[ sboyd@codeaurora.org: Clarify commit message ]
Signed-off-by: Christine Chan <cschan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/1320724108-20788-3-git-send-email-sboyd@codeaurora.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make debugobjects use the return code from the fixup function. That
allows us better diagnostics in the activate check than relying on a
WARN_ON() in the object specific code.
[ tglx@linutronix.de: Split out the debugobjects vs. the timer change ]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Christine Chan <cschan@codeaurora.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1320724108-20788-2-git-send-email-sboyd@codeaurora.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Order of initialization look like this:
...
debugobjects
kmemleak
...(lots of other subsystems)...
workqueues (through early initcall)
...
debugobjects use schedule_work for batch freeing of its data and kmemleak
heavily use debugobjects, so when it comes to freeing and workqueues were
not initialized yet, kernel crashes:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff810854d1>] __queue_work+0x29/0x41a
[<ffffffff81085910>] queue_work_on+0x16/0x1d
[<ffffffff81085abc>] queue_work+0x29/0x55
[<ffffffff81085afb>] schedule_work+0x13/0x15
[<ffffffff81242de1>] free_object+0x90/0x95
[<ffffffff81242f6d>] debug_check_no_obj_freed+0x187/0x1d3
[<ffffffff814b6504>] ? _raw_spin_unlock_irqrestore+0x30/0x4d
[<ffffffff8110bd14>] ? free_object_rcu+0x68/0x6d
[<ffffffff8110890c>] kmem_cache_free+0x64/0x12c
[<ffffffff8110bd14>] free_object_rcu+0x68/0x6d
[<ffffffff810b58bc>] __rcu_process_callbacks+0x1b6/0x2d9
...
because system_wq is NULL.
Fix it by checking if workqueues susbystem was initialized before using.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/20110528112342.GA3068@joi.lan
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In complex subsystems like mac80211 structures can contain several
timers and work structs, so identifying a specific instance from the
call trace and object type output of debugobjects can be hard.
Allow the subsystems which support debugobjects to provide a hint
function. This function returns a pointer to a kernel address
(preferrably the objects callback function) which is printed along
with the debugobjects type.
Add hint methods for timer_list, work_struct and hrtimer.
[ tglx: Massaged changelog, made it compile ]
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
LKML-Reference: <20110307085809.GA9334@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
rcu: remove all rcu head initializations, except on_stack initializations
rcu head introduce rcu head init on stack
Debugobjects transition check
rcu: fix build bug in RCU_FAST_NO_HZ builds
rcu: RCU_FAST_NO_HZ must check RCU dyntick state
rcu: make SRCU usable in modules
rcu: improve the RCU CPU-stall warning documentation
rcu: reduce the number of spurious RCU_SOFTIRQ invocations
rcu: permit discontiguous cpu_possible_mask CPU numbering
rcu: improve RCU CPU stall-warning messages
rcu: print boot-time console messages if RCU configs out of ordinary
rcu: disable CPU stall warnings upon panic
rcu: enable CPU_STALL_VERBOSE by default
rcu: slim down rcutiny by removing rcu_scheduler_active and friends
rcu: refactor RCU's context-switch handling
rcu: rename rcutiny rcu_ctrlblk to rcu_sched_ctrlblk
rcu: shrink rcutiny by making synchronize_rcu_bh() be inline
rcu: fix now-bogus rcu_scheduler_active comments.
rcu: Fix bogus CONFIG_PROVE_LOCKING in comments to reflect reality.
rcu: ignore offline CPUs in last non-dyntick-idle CPU check
...
Implement a basic state machine checker in the debugobjects.
This state machine checker detects races and inconsistencies within the "active"
life of a debugobject. The checker only keeps track of the current state; all
the state machine logic is kept at the object instance level.
The checker works by adding a supplementary "unsigned int astate" field to the
debug_obj structure. It keeps track of the current "active state" of the object.
The only constraints that are imposed on the states by the debugobjects system
is that:
- activation of an object sets the current active state to 0,
- deactivation of an object expects the current active state to be 0.
For the rest of the states, the state mapping is determined by the specific
object instance. Therefore, the logic keeping track of the state machine is
within the specialized instance, without any need to know about it at the
debugobject level.
The current object active state is changed by calling:
debug_object_active_state(addr, descr, expect, next)
where "expect" is the expected state and "next" is the next state to move to if
the expected state is found. A warning is generated if the expected is not
found.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David S. Miller <davem@davemloft.net>
CC: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
CC: akpm@linux-foundation.org
CC: mingo@elte.hu
CC: laijs@cn.fujitsu.com
CC: dipankar@in.ibm.com
CC: josh@joshtriplett.org
CC: dvhltc@us.ibm.com
CC: niv@us.ibm.com
CC: peterz@infradead.org
CC: rostedt@goodmis.org
CC: Valdis.Kletnieks@vt.edu
CC: dhowells@redhat.com
CC: eric.dumazet@gmail.com
CC: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
This patch marks two functions, which only get called at
initialization, as __init.
Here is also interesting, that modpost doesn't catch here the right
function name.
WARNING: lib/built-in.o(.text+0x585f): Section mismatch in reference
from the function T.506() to the variable .init.data:obj
The function T.506() references the variable __initdata obj.
This is often because T.506 lacks a __initdata annotation or the
annotation of obj is wrong.
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
LKML-Reference: <1269632315-19403-1-git-send-email-henne@nachtwindheim.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
