Commit Graph

8 Commits

Author SHA1 Message Date
William Breathitt Gray 042c576ca4 ALSA: cmi8328: Utilize the module_isa_driver macro
This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-01 07:35:47 +02:00
Lars-Peter Clausen fa60c06569 ALSA: wss: Remove (almost) always NULL parameters
Most callers of snd_wss_pcm(), snd_wss_timer() and snd_cs4236_pcm() pass
NULL as the last parameter, some callers pass a pointer but never use it
after the function has been called and only a few callers pass a pointer and
actually use it. The later is only the case for snd_wss_pcm() for
snd_cs4236_pcm() and it is possible to get the same PCM object by accessing
the pcm field of the snd_wss struct that was passed as the first parameter.

This function removes the last parameters from the functions mentioned above
and updates the callers which used it to use chip->pcm instead. This allows
us to slightly simplify the functions since they don't have to check and set
the last parameter anymore which makes the code slightly shorter and
cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-02 16:30:08 +01:00
Takashi Iwai 4323cc4d5b ALSA: isa: Convert to snd_card_new() with a device pointer
Also remove superfluous snd_card_set_dev() calls.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-12 10:58:21 +01:00
Takashi Iwai 77ed16cc6c ALSA: cmi8328: Fix compile warnings without CONFIG_PM
Just add an ifdef CONFIG_PM to shut up the warnings:

  sound/isa/cmi8328.c:129:13: warning: ‘snd_cmi8328_cfg_save’ defined but not used [-Wunused-function]
  sound/isa/cmi8328.c:136:13: warning: ‘snd_cmi8328_cfg_restore’ defined but not used [-Wunused-function]

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-11-06 17:57:22 +01:00
Takashi Iwai 8b5a1f9c46 ALSA: ISA: Remove superfluous *_set_drvdata(NULL) calls
Similarly like the previous commit for PCI drivers, remove
dev_set_drvdata(NULL) and pnp_set_drvdata(NULL) calls in ISA drivers
now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-29 12:50:28 +02:00
Bill Pemberton 1bff292e9a ALSA: isa: remove __dev* attributes
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07 07:32:17 +01:00
Takashi Iwai 56244d0868 ALSA: cmi8328: Fix build error with CONFIG_GAMEPORT=n
sound/isa/cmi8328.c: In function 'snd_cmi8328_remove':
  sound/isa/cmi8328.c:416:24: error: 'cmi' undeclared (first use in this function)
  sound/isa/cmi8328.c:416:24: note: each undeclared identifier is reported only once for each function it appears in
  make[3]: *** [sound/isa/cmi8328.o] Error 1

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-24 07:54:16 +02:00
Ondrej Zary f993348746 ALSA: introduce snd-cmi8328: C-Media CMI8328 driver
Introduce snd-cmi8328 driver for C-Media CMI8328-based sound cards, such as
AudioExcel AV500.

It supports PCM playback and capture (full-duplex) through wss_lib, gameport,
OPL3 and MPU401. The AV500 card has onboard Dream wavetable synth connected
to the MPU401 port and Aux 1 input internally which works too.
The CDROM interface is not supported (as the drivers for these CDROMs were
removed from the kernel some time ago).

A separate driver is needed because CMI8328 is completely different chip to
CMI8329/CMI8330. It's configured by magic registers (there's no PnP). Sound is
provided by a real WSS codec (CS4231A) and the SB part is just a SB Pro
emulation (for DOS games, useless for Linux).

When SB is enabled, the CMI8328 chip disables access to the WSS codec,
emulates SoundBlaster on one side and outputs sound data to the codec - so SB
and WSS can't work together with this card. The WSS codec can do full duplex
by itself so there's no need for crazy things like snd-cmi8330 does
(combining SB and WSS parts into one driver).

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-21 07:30:46 +02:00