Commit Graph

16 Commits

Author SHA1 Message Date
Krzysztof Kozlowski 0e777366fb mfd: Drop owner assignment from i2c_drivers
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-11 15:08:48 +01:00
Lee Jones dc54392921 mfd: 88pm805: msleep(1ms ~ 20ms) may not do what the caller intends
This code has been working since 2012, as limiting the time between
1ms and 3ms is unlikely to do any harm.

Soothes checkpatch warning:

  WARNING: msleep < 20ms can sleep for up to 20ms;
      see Documentation/timers/timers-howto.txt
  #161: FILE: drivers/mfd/88pm805.c:161:
  +	msleep(1);

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09 16:38:02 +01:00
Geert Uytterhoeven 04e0241730 mfd: marvell: Constify struct mfd_cell where possible
As of commit 03e361b25e ("mfd: Stop setting
refcounting pointers in original mfd_cell arrays"), the "cell" parameter of
mfd_add_devices() is "const" again. Hence make all cell data passed to
mfd_add_devices() const where possible.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-06 09:13:26 +00:00
Chao Xie 2b274fe522 mfd: 88pm805: Fix potential NULL pdata dereference
User pass platform data to device, and platform data may be
NULL. Add the check for pdata.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-02 11:00:16 +02:00
Jingoo Han 334a41ce9b mfd: Use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-07-31 13:01:29 +01:00
Chao Xie 03dcc544bf mfd: 88pm80x: Change chip id definition and detection
Change the chip id definition and detection and then:

1. We no longer need to add PM800_CHIP_XXX for the coming revision.
2. We no longer need to pass driver_data in i2c_device_id as we
   can distinguish the chips from the CHIP_ID register.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18 09:41:10 +02:00
Yi Zhang 1ef5677e0e mfd: 88pm800: 88pm805: Remove "IRQF_TRIGGER_FALLING" flag
88pm800/88pm805 interrupt is asserted low if the events happened.
So remove IRQF_TRIGGER_FALLING for irq request.
Also, the interrupt wiring is board dependent so do not set
IRQF_TRIGGER by default.

Signed-off-by: Yi Zhang <yizhang@marvell.com>
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18 01:06:21 +02:00
Chao Xie 46223a19ad mfd: 88pm80x: Fix driver name for 88pm800 and 88pm805
88pm800 and 88pm805 shouldnot have the same driver name.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18 01:05:52 +02:00
Yi Zhang 306df79850 mfd: 88pm80x: Remove redundant devm_* calls
devm_* functions are device managed and make error handling
and code simpler; it also fix error exit paths

Signed-off-by: Yi Zhang <yizhang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14 00:22:54 +01:00
Bill Pemberton 4740f73fe5 mfd: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 12:22:27 -08:00
Bill Pemberton f791be492f mfd: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 12:20:19 -08:00
Bill Pemberton 84449216b0 mfd: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 12:16:42 -08:00
Mark Brown 0848c94fb4 mfd: core: Push irqdomain mapping out into devices
Currently the MFD core supports remapping MFD cell interrupts using an
irqdomain but only if the MFD is being instantiated using device tree
and only if the device tree bindings use the pattern of registering IPs
in the device tree with compatible properties.  This will be actively
harmful for drivers which support non-DT platforms and use this pattern
for their DT bindings as it will mean that the core will silently change
remapping behaviour and it is also limiting for drivers which don't do
DT with this particular pattern.  There is also a potential fragility if
there are interrupts not associated with MFD cells and all the cells are
omitted from the device tree for some reason.

Instead change the code to take an IRQ domain as an optional argument,
allowing drivers to take the decision about the parent domain for their
interrupts.  The one current user of this feature is ab8500-core, it has
the domain lookup pushed out into the driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-15 23:22:04 +02:00
Axel Lin 46b65a8fe6 mfd: Fix checking return value of 88pm8xx regmap_read()
Check the return value of regmap_read() rather than the read value.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-16 15:26:37 +02:00
Samuel Ortiz 31b3ffbdfb mfd: 88pm80[05] i2c device_id arrays should be NULL terminated
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09 15:13:43 +02:00
Qiao Zhou 70c6cce040 mfd: Support 88pm80x in 80x driver
88PM800 and 88PM805 are two discrete chips used for power management.
Hardware designer can use them together or only one of them according
to requirement.

88pm80x.c provides common i2c driver handling for both 800 and
805, such as i2c_driver init, regmap init, read/write api etc.

88pm800.c handles specifically for 800, such as chip init, irq
init/handle, mfd device register, including rtc, onkey, regulator(
to be add later) etc. besides that, 800 has three i2c device, one
regular i2c client, two other i2c dummy for gpadc and power purpose.

88pm805.c handles specifically for 805, such as chip init, irq
init/handle, mfd device register, including codec, headset/mic detect
etc.

the i2c operation of both 800 and 805 are via regmap, and 88pm80x-i2c
exported a group of r/w bulk r/w and bits set API for facility.

Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09 15:12:51 +02:00