Commit Graph

102 Commits

Author SHA1 Message Date
Stephen Hemminger 72d24955b4 veth: set peer GSO values
When new veth is created, and GSO values have been configured
on one device, clone those values to the peer.

For example:
   # ip link add dev vm1 gso_max_size 65530 type veth peer name vm2

This should create vm1 <--> vm2 with both having GSO maximum
size set to 65530.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08 14:22:59 -05:00
David S. Miller b079115937 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
A set of overlapping changes in macvlan and the rocker
driver, nothing serious.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30 12:43:08 -04:00
Matthias Schiffer a8b8a889e3 net: add netlink_ext_ack argument to rtnl_link_ops.validate
Add support for extended error reporting.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26 23:13:22 -04:00
Matthias Schiffer 7a3f4a1851 net: add netlink_ext_ack argument to rtnl_link_ops.newlink
Add support for extended error reporting.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26 23:13:21 -04:00
Serhey Popovych 191cdb3822 veth: Be more robust on network device creation when no attributes
There are number of problems with configuration peer
network device in absence of IFLA_VETH_PEER attributes
where attributes for main network device shared with
peer.

First it is not feasible to configure both network
devices with same MAC address since this makes
communication in such configuration problematic.

This case can be reproduced with following sequence:

  # ip link add address 02:11:22:33:44:55 type veth
  # ip li sh
  ...
  26: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \
  noop state DOWN mode DEFAULT qlen 1000
      link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff
  27: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \
  noop state DOWN mode DEFAULT qlen 1000
      link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff

Second it is not possible to register both main and
peer network devices with same name, that happens
when name for main interface is given with IFLA_IFNAME
and same attribute reused for peer.

This case can be reproduced with following sequence:

  # ip link add dev veth1a type veth
  RTNETLINK answers: File exists

To fix both of the cases check if corresponding netlink
attributes are taken from peer_tb when valid or
name based on rtnl ops kind and random address is used.

Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-22 11:15:15 -04:00
David S. Miller cf124db566 net: Fix inconsistent teardown and release of private netdev state.
Network devices can allocate reasources and private memory using
netdev_ops->ndo_init().  However, the release of these resources
can occur in one of two different places.

Either netdev_ops->ndo_uninit() or netdev->destructor().

The decision of which operation frees the resources depends upon
whether it is necessary for all netdev refs to be released before it
is safe to perform the freeing.

netdev_ops->ndo_uninit() presumably can occur right after the
NETDEV_UNREGISTER notifier completes and the unicast and multicast
address lists are flushed.

netdev->destructor(), on the other hand, does not run until the
netdev references all go away.

Further complicating the situation is that netdev->destructor()
almost universally does also a free_netdev().

This creates a problem for the logic in register_netdevice().
Because all callers of register_netdevice() manage the freeing
of the netdev, and invoke free_netdev(dev) if register_netdevice()
fails.

If netdev_ops->ndo_init() succeeds, but something else fails inside
of register_netdevice(), it does call ndo_ops->ndo_uninit().  But
it is not able to invoke netdev->destructor().

This is because netdev->destructor() will do a free_netdev() and
then the caller of register_netdevice() will do the same.

However, this means that the resources that would normally be released
by netdev->destructor() will not be.

Over the years drivers have added local hacks to deal with this, by
invoking their destructor parts by hand when register_netdevice()
fails.

Many drivers do not try to deal with this, and instead we have leaks.

Let's close this hole by formalizing the distinction between what
private things need to be freed up by netdev->destructor() and whether
the driver needs unregister_netdevice() to perform the free_netdev().

netdev->priv_destructor() performs all actions to free up the private
resources that used to be freed by netdev->destructor(), except for
free_netdev().

netdev->needs_free_netdev is a boolean that indicates whether
free_netdev() should be done at the end of unregister_netdevice().

Now, register_netdevice() can sanely release all resources after
ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit()
and netdev->priv_destructor().

And at the end of unregister_netdevice(), we invoke
netdev->priv_destructor() and optionally call free_netdev().

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07 15:53:24 -04:00
Johannes Berg fceb6435e8 netlink: pass extended ACK struct to parsing functions
Pass the new extended ACK reporting struct to all of the generic
netlink parsing functions. For now, pass NULL in almost all callers
(except for some in the core.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13 13:58:22 -04:00
Philippe Reynes 56607b987b net: veth: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-29 14:07:22 -07:00
stephen hemminger bc1f44709c net: make ndo_get_stats64 a void function
The network device operation for reading statistics is only called
in one place, and it ignores the return value. Having a structure
return value is potentially confusing because some future driver could
incorrectly assume that the return value was used.

Fix all drivers with ndo_get_stats64 to have a void function.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08 17:51:44 -05:00
Jarod Wilson 91572088e3 net: use core MTU range checking in core net infra
geneve:
- Merge __geneve_change_mtu back into geneve_change_mtu, set max_mtu
- This one isn't quite as straight-forward as others, could use some
  closer inspection and testing

macvlan:
- set min/max_mtu

tun:
- set min/max_mtu, remove tun_net_change_mtu

vxlan:
- Merge __vxlan_change_mtu back into vxlan_change_mtu
- Set max_mtu to IP_MAX_MTU and retain dynamic MTU range checks in
  change_mtu function
- This one is also not as straight-forward and could use closer inspection
  and testing from vxlan folks

bridge:
- set max_mtu of IP_MAX_MTU and retain dynamic MTU range checks in
  change_mtu function

openvswitch:
- set min/max_mtu, remove internal_dev_change_mtu
- note: max_mtu wasn't checked previously, it's been set to 65535, which
  is the largest possible size supported

sch_teql:
- set min/max_mtu (note: max_mtu previously unchecked, used max of 65535)

macsec:
- min_mtu = 0, max_mtu = 65535

macvlan:
- min_mtu = 0, max_mtu = 65535

ntb_netdev:
- min_mtu = 0, max_mtu = 65535

veth:
- min_mtu = 68, max_mtu = 65535

8021q:
- min_mtu = 0, max_mtu = 65535

CC: netdev@vger.kernel.org
CC: Nicolas Dichtel <nicolas.dichtel@6wind.com>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
CC: Tom Herbert <tom@herbertland.com>
CC: Daniel Borkmann <daniel@iogearbox.net>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
CC: Paolo Abeni <pabeni@redhat.com>
CC: Jiri Benc <jbenc@redhat.com>
CC: WANG Cong <xiyou.wangcong@gmail.com>
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
CC: Pravin B Shelar <pshelar@ovn.org>
CC: Sabrina Dubroca <sd@queasysnail.net>
CC: Patrick McHardy <kaber@trash.net>
CC: Stephen Hemminger <stephen@networkplumber.org>
CC: Pravin Shelar <pshelar@nicira.com>
CC: Maxim Krasnyansky <maxk@qti.qualcomm.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 14:51:09 -04:00
David Ahern 607fca9acf net: veth: Set features for MPLS
veth does not really transmit packets only moves the skb from one
netdev to another so gso and checksum is not really needed. Add
the features to mpls_features to get the same benefit and performance
with MPLS as without it.

Reported-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-30 22:27:18 -07:00
Xin Long c80fafbbb5 veth: sctp: add NETIF_F_SCTP_CRC to device features
Commit b17c706987 ("loopback: sctp: add NETIF_F_SCTP_CSUM to device
features") added NETIF_F_SCTP_CRC to device features for lo device to
improve the performance of sctp over lo.

This patch is to add NETIF_F_SCTP_CRC to device features for veth to
improve the performance of sctp over veth.

Before this patch:
  ip netns exec cs_client netperf -H 10.167.12.2 -t SCTP_STREAM -- -m 10K
  Recv   Send    Send
  Socket Socket  Message  Elapsed
  Size   Size    Size     Time     Throughput
  bytes  bytes   bytes    secs.    10^6bits/sec

  212992 212992  10240    10.00    1117.16

After this patch:
  ip netns exec cs_client netperf -H 10.167.12.2 -t SCTP_STREAM -- -m 10K
  Recv   Send    Send
  Socket Socket  Message  Elapsed
  Size   Size    Size     Time     Throughput
  bytes  bytes   bytes    secs.    10^6bits/sec

  212992 212992  10240    10.20    1415.22

Tested-by: Li Shuang <tjlishuang@yeah.net>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26 11:43:03 -07:00
Alexander Duyck 732912d727 veth: Update features to include all tunnel GSO types
This patch adds support for the checksum enabled versions of UDP and GRE
tunnels.  With this change we should be able to send and receive GSO frames
of these types over the veth pair without needing to segment the packets.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21 14:14:59 -04:00
Paolo Abeni 163e529200 veth: implement ndo_set_rx_headroom
The rx headroom for veth dev is the peer device needed_headroom.
Avoid ping-pong updates setting the private flag IFF_PHONY_HEADROOM.

This avoids skb head reallocation when forwarding from a veth dev
towards a device adding some kind of encapsulation.

When transmitting frames below the MTU size towards a vxlan device,
this gives about 10% performance speed-up when OVS is used to connect
the veth and the vxlan device and a little more when using a
plain Linux bridge.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01 15:54:31 -05:00
Vijay Pandurangan ce8c839b74 veth: don’t modify ip_summed; doing so treats packets with bad checksums as good.
Packets that arrive from real hardware devices have ip_summed ==
CHECKSUM_UNNECESSARY if the hardware verified the checksums, or
CHECKSUM_NONE if the packet is bad or it was unable to verify it. The
current version of veth will replace CHECKSUM_NONE with
CHECKSUM_UNNECESSARY, which causes corrupt packets routed from hardware to
a veth device to be delivered to the application. This caused applications
at Twitter to receive corrupt data when network hardware was corrupting
packets.

We believe this was added as an optimization to skip computing and
verifying checksums for communication between containers. However, locally
generated packets have ip_summed == CHECKSUM_PARTIAL, so the code as
written does nothing for them. As far as we can tell, after removing this
code, these packets are transmitted from one stack to another unmodified
(tcpdump shows invalid checksums on both sides, as expected), and they are
delivered correctly to applications. We didn’t test every possible network
configuration, but we tried a few common ones such as bridging containers,
using NAT between the host and a container, and routing from hardware
devices to containers. We have effectively deployed this in production at
Twitter (by disabling RX checksum offloading on veth devices).

This code dates back to the first version of the driver, commit
<e314dbdc1c0dc6a548ecf> ("[NET]: Virtual ethernet device driver"), so I
suspect this bug occurred mostly because the driver API has evolved
significantly since then. Commit <0b7967503dc97864f283a> ("net/veth: Fix
packet checksumming") (in December 2010) fixed this for packets that get
created locally and sent to hardware devices, by not changing
CHECKSUM_PARTIAL. However, the same issue still occurs for packets coming
in from hardware devices.

Co-authored-by: Evan Jones <ej@evanjones.ca>
Signed-off-by: Evan Jones <ej@evanjones.ca>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Phil Sutter <phil@nwl.cc>
Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Vijay Pandurangan <vijayp@vijayp.ca>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-22 15:15:34 -05:00
Phil Sutter 02f01ec1c5 net: veth: enable noqueue operation by default
Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 11:55:04 -07:00
Toshiaki Makita 1a04a82156 veth: Don't segment multiple tagged packets on veth device
Veth devices don't need to segment multiple tagged packets.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-03 14:24:50 -07:00
Nicolas Dichtel a45253bf32 veth: set iflink to the peer veth
Now that the peer netns is advertised in rtnl messages, we can set this property
so that IFLA_LINK will advertise the peer ifindex. It allows the userland to get
the full veth configuration.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02 14:05:01 -04:00
Nicolas Dichtel e5f4e7b9ff veth: advertise link netns via netlink
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is
added to rtnetlink messages.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-23 17:51:15 -08:00
Tom Gundersen 5517750f05 net: rtnetlink - make create_link take name_assign_type
This passes down NET_NAME_USER (or NET_NAME_ENUM) to alloc_netdev(),
for any device created over rtnetlink.

v9: restore reverse-christmas-tree order of local variables

Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 16:13:07 -07:00
WANG Cong bb446c19fe veth: add netpoll support
It is trivial to add netpoll support to veth, since
it is not a stacked device, we don't need to setup and
clean up netpoll.

Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-25 16:35:37 -07:00
David S. Miller 64c27237a0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/marvell/mvneta.c

The mvneta.c conflict is a case of overlapping changes,
a conversion to devm_ioremap_resource() vs. a conversion
to netdev_alloc_pcpu_stats.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29 18:48:54 -04:00
Vlad Yasevich 3f8c707b9a veth: Turn off vlan rx acceleration in vlan_features
For completeness, turn off vlan rx acceleration in vlan_features so
that it doesn't show up on q-in-q setups.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:16:51 -04:00
Eric W. Biederman 57a7744e09 net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irq
Replace the bh safe variant with the hard irq safe variant.

We need a hard irq safe variant to deal with netpoll transmitting
packets from hard irq context, and we need it in most if not all of
the places using the bh safe variant.

Except on 32bit uni-processor the code is exactly the same so don't
bother with a bh variant, just have a hard irq safe variant that
everyone can use.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14 22:41:36 -04:00
David S. Miller 67ddc87f16 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/wireless/ath/ath9k/recv.c
	drivers/net/wireless/mwifiex/pcie.c
	net/ipv6/sit.c

The SIT driver conflict consists of a bug fix being done by hand
in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper
was created (netdev_alloc_pcpu_stats()) which takes care of this.

The two wireless conflicts were overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05 20:32:02 -05:00
Toshiaki Makita 8d0d21f405 veth: Fix vlan_features so as to be able to use stacked vlan interfaces
Even if we create a stacked vlan interface such as veth0.10.20, it sends
single tagged frames (tagged with only vid 10).
Because vlan_features of a veth interface has the
NETIF_F_HW_VLAN_[CTAG/STAG]_TX bits, veth0.10 also has that feature, so
dev_hard_start_xmit(veth0.10) doesn't call __vlan_put_tag() and
vlan_dev_hard_start_xmit(veth0.10) overwrites vlan_tci.
This prevents us from using a combination of 802.1ad and 802.1Q
in containers, etc.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-20 02:15:38 -05:00
Jiri Pirko f7b12606b5 rtnl: make ifla_policy static
The only place this is used outside rtnetlink.c is veth. So provide
wrapper function for this usage.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 18:15:42 -05:00
WANG Cong 1c213bd24a net: introduce netdev_alloc_pcpu_stats() for drivers
There are many drivers calling alloc_percpu() to allocate pcpu stats
and then initializing ->syncp. So just introduce a helper function for them.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14 15:49:55 -05:00
Linus Torvalds 5e30025a31 Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core locking changes from Ingo Molnar:
 "The biggest changes:

   - add lockdep support for seqcount/seqlocks structures, this
     unearthed both bugs and required extra annotation.

   - move the various kernel locking primitives to the new
     kernel/locking/ directory"

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  block: Use u64_stats_init() to initialize seqcounts
  locking/lockdep: Mark __lockdep_count_forward_deps() as static
  lockdep/proc: Fix lock-time avg computation
  locking/doc: Update references to kernel/mutex.c
  ipv6: Fix possible ipv6 seqlock deadlock
  cpuset: Fix potential deadlock w/ set_mems_allowed
  seqcount: Add lockdep functionality to seqcount/seqlock structures
  net: Explicitly initialize u64_stats_sync structures for lockdep
  locking: Move the percpu-rwsem code to kernel/locking/
  locking: Move the lglocks code to kernel/locking/
  locking: Move the rwsem code to kernel/locking/
  locking: Move the rtmutex code to kernel/locking/
  locking: Move the semaphore core to kernel/locking/
  locking: Move the spinlock code to kernel/locking/
  locking: Move the lockdep code to kernel/locking/
  locking: Move the mutex code to kernel/locking/
  hung_task debugging: Add tracepoint to report the hang
  x86/locking/kconfig: Update paravirt spinlock Kconfig description
  lockstat: Report avg wait and hold times
  lockdep, x86/alternatives: Drop ancient lockdep fixup message
  ...
2013-11-14 16:30:30 +09:00
John Stultz 827da44c61 net: Explicitly initialize u64_stats_sync structures for lockdep
In order to enable lockdep on seqcount/seqlock structures, we
must explicitly initialize any locks.

The u64_stats_sync structure, uses a seqcount, and thus we need
to introduce a u64_stats_init() function and use it to initialize
the structure.

This unfortunately adds a lot of fairly trivial initialization code
to a number of drivers. But the benefit of ensuring correctness makes
this worth while.

Because these changes are required for lockdep to be enabled, and the
changes are quite trivial, I've not yet split this patch out into 30-some
separate patches, as I figured it would be better to get the various
maintainers thoughts on how to best merge this change along with
the seqcount lockdep enablement.

Feedback would be appreciated!

Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: James Morris <jmorris@namei.org>
Cc: Jesse Gross <jesse@nicira.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mirko Lindner <mlindner@marvell.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Roger Luethi <rl@hellgate.ch>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Simon Horman <horms@verge.net.au>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Wensong Zhang <wensong@linux-vs.org>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/1381186321-4906-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-06 12:40:25 +01:00
Eric Dumazet 82d8189826 veth: extend features to support tunneling
While investigating on a recent vxlan regression, I found veth
was using a zero features set for vxlan tunnels.

We have to segment GSO frames, copy the payload, and do the checksum.

This patch brings a ~200% performance increase

We probably have to add hw_enc_features support
on other virtual devices.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 00:57:29 -04:00
Gao feng 5c70ef85a2 veth: allow to setup multicast address for veth device
We can only setup multicast address for network device when
net_device_ops->ndo_set_rx_mode is not null.

Some configurations need to add multicast address for net
device, such as netfilter cluster match module.

Add a fake ndo_set_rx_mode function to allow this operation.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-10 00:08:07 -04:00
David S. Miller b343ca84b4 Revert "veth: Showing peer of veth type dev in ip link (kernel side)"
This reverts commit 612c337306.

As per Stephen Hemminger, the layout of the netlink attribute
is not implemented correctly so revert this for now.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08 21:52:03 -04:00
Masatake YAMATO 612c337306 veth: Showing peer of veth type dev in ip link (kernel side)
ip link has ability to show extra information of net work device if
kernel provides sunh information. With this patch veth driver can
provide its peer ifindex information to ip command via netlink
interface.

Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08 15:23:25 -04:00
Flavio Leitner b69bbddfa1 veth: add vlan features
The veth device doesn't provide the vlan features,
so TSO for example is disabled and that causes
performance issues when using tagged traffic.

The test topology looks like this:

    br0                     br1
  /   \                  /     \
vnet  veth0.10 ----- veth1.10   vnet
VM                               VM

The netperf results with current veth driver:
MIGRATED TCP STREAM TEST from 192.168.1.1 ()
port 0 AF_INET to 192.168.1.2 () port 0 AF_INET
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 87380  16384  16384    10.01    2210.22

Now after applying the proposed patch:
MIGRATED TCP STREAM TEST from 192.168.1.1 ()
port 0 AF_INET to 192.168.1.2 () port 0 AF_INET
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 87380  16384  16384    10.00    13067.47

Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-19 17:36:03 -07:00
Hong zhi guo 3f8b96379a veth: remove redundant call of dev_alloc_name
it's called in the following register_netdevice. No need to call it
here.
Tested with "ip link add type veth" and "ip link add xxx%d type veth".

Signed-off-by: Hong Zhiguo <honkiko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12 01:21:20 -07:00
Patrick McHardy 28d2b136ca net: vlan: announce STAG offload capability in some drivers
- macvlan: propagate STAG filtering capabilities from underlying device
- ifb: announce STAG tagging support in addition to CTAG tagging support
- veth: announce STAG tagging/stripping support in addition to CTAG support

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:46:06 -04:00
Patrick McHardy f646968f8f net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*
Rename the hardware VLAN acceleration features to include "CTAG" to indicate
that they only support CTAGs. Follow up patches will introduce 802.1ad
server provider tagging (STAGs) and require the distinction for hardware not
supporting acclerating both.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:45:26 -04:00
Eric Dumazet f45a5c267d veth: fix NULL dereference in veth_dellink()
commit d0e2c55e7c (veth: avoid a NULL deref in veth_stats_one)
added another NULL deref in veth_dellink().

# ip link add name veth1 type veth peer name veth0
# rmmod veth

We crash because veth_dellink() is called twice, so we must
take care of NULL peer.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-10 20:41:43 -05:00
Eric Dumazet 2efd32ee1b veth: fix a NULL deref in netif_carrier_off
In commit d0e2c55e7c (veth: avoid a NULL deref in veth_stats_one)
we now clear the peer pointers in veth_dellink()

veth_close() must therefore make sure the peer pointer is set.

Reported-by: Tom Parkin <tom.parkin@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10 14:11:46 -08:00
Eric Dumazet d0e2c55e7c veth: avoid a NULL deref in veth_stats_one
commit 2681128f0c (veth: extend device features) added a NULL deref
in veth_stats_one(), as veth_get_stats64() was not testing if the peer
device was setup or not.

At init time, we call dev_get_stats() before veth pair is fully setup.

[  178.854758]  [<ffffffffa00f5677>] veth_get_stats64+0x47/0x70 [veth]
[  178.861013]  [<ffffffff814f0a2d>] dev_get_stats+0x6d/0x130
[  178.866486]  [<ffffffff81504efc>] rtnl_fill_ifinfo+0x47c/0x930
[  178.872299]  [<ffffffff81505b93>] rtmsg_ifinfo+0x83/0x100
[  178.877678]  [<ffffffff81505cc6>] rtnl_configure_link+0x76/0xa0
[  178.883580]  [<ffffffffa00f52fa>] veth_newlink+0x16a/0x350 [veth]
[  178.889654]  [<ffffffff815061cc>] rtnl_newlink+0x4dc/0x5e0
[  178.895128]  [<ffffffff81505e1e>] ? rtnl_newlink+0x12e/0x5e0
[  178.900769]  [<ffffffff8150587d>] rtnetlink_rcv_msg+0x11d/0x310
[  178.906669]  [<ffffffff81505760>] ? __rtnl_unlock+0x20/0x20
[  178.912225]  [<ffffffff81521f89>] netlink_rcv_skb+0xa9/0xd0
[  178.917779]  [<ffffffff81502d55>] rtnetlink_rcv+0x25/0x40
[  178.923159]  [<ffffffff815218d1>] netlink_unicast+0x1b1/0x230
[  178.928887]  [<ffffffff81521c4e>] netlink_sendmsg+0x2fe/0x3b0
[  178.934615]  [<ffffffff814dbe22>] sock_sendmsg+0xd2/0xf0

So we must check if peer was setup in veth_get_stats64()

As pointed out by Ben Hutchings, priv->peer is missing proper
synchronization. Adding RCU protection is a safe and well documented
way to make sure we don't access about to be freed or already
freed data.

Reported-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-07 19:42:50 -08:00
Eric Dumazet 8093315a91 veth: extend device features
veth is lacking most modern facilities, like SG, checksums, TSO.

It makes sense to extend dev->features to get them, or GRO aggregation
is defeated by a forced segmentation.

Reported-by: Andrew Vagin <avagin@parallels.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-30 02:31:59 -08:00
Eric Dumazet 2681128f0c veth: reduce stat overhead
veth stats are a bit bloated. There is no need to account transmit
and receive stats, since they are absolutely symmetric.

Also use a per device atomic64_t for the dropped counter, as it
should never be used in fast path.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-30 02:31:58 -08:00
Rami Rosen c07135633b rtnelink: remove unused parameter from rtnl_create_link().
This patch removes an unused parameter (src_net) from rtnl_create_link()
method and from the method single invocation, in veth.
This parameter was used in the past when calling
ops->get_tx_queues(src_net, tb) in rtnl_create_link().
The get_tx_queues() member of rtnl_link_ops was replaced by two methods,
get_num_tx_queues() and get_num_rx_queues(), which do not get any
parameter. This was done in commit d40156aa5e by
Jiri Pirko ("rtnl: allow to specify different num for rx and tx queue count").

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30 12:24:40 -05:00
Hannes Frederic Sowa 23ea5a9637 veth: allow changing the mac address while interface is up
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 12:26:10 -04:00
Pavel Emelyanov e6f8f1a739 veth: Allow to create peer link with given ifindex
The ifinfomsg is in there (thanks kaber@ for foreseeing this long time ago),
so take the given ifidex and register netdev with it.

Ben noticed, that this code path previously ignored ifmp->ifi_index and
userland could be passing in garbage. Thus it may now fail occasionally
because the value clashes with an existing interface.

To address this it's assumed that if the caller specifies the ifindex for
the veth master device, then it's aware of this possibility and should
explicitly specify (or set to 0 for auto-assignment) the peer's ifindex as
well. With this the compatibility with old tools not setting ifindex is
preserved.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-09 16:18:07 -07:00
David S. Miller 32efe08d77 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c

Small minor conflict in bnx2x, wherein one commit changed how
statistics were stored in software, and another commit
fixed endianness bugs wrt. reading the values provided by
the chip in memory.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-19 16:03:15 -05:00
Danny Kukawka f2cedb63df net: replace random_ether_addr() with eth_hw_addr_random()
Replace usage of random_ether_addr() with eth_hw_addr_random()
to set addr_assign_type correctly to NET_ADDR_RANDOM.

Change the trivial cases.

v2: adapt to renamed eth_hw_addr_random()

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15 15:34:16 -05:00
Thomas Graf 237114384a veth: Enforce minimum size of VETH_INFO_PEER
VETH_INFO_PEER carries struct ifinfomsg plus optional IFLA
attributes. A minimal size of sizeof(struct ifinfomsg) must be
enforced or we may risk accessing that struct beyond the limits
of the netlink message.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15 14:59:20 -05:00
Rick Jones 84b4050111 Sweep away N/A fw_version dustbunnies from the .get_drvinfo routine of a number of drivers
Per discussion with Ben Hutchings and David Miller, go through and
remove assignments of "N/A" to fw_version in various drivers'
.get_drvinfo routines.  While there clean-up some use of bare
constants and such.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22 16:43:32 -05:00