Commit Graph

3737 Commits

Author SHA1 Message Date
Nishka Dasgupta 811ba489fa
regulator: of: Add of_node_put() before return in function
The local variable search in regulator_of_get_init_node takes the value
returned by either of_get_child_by_name or of_node_get, both of which
get a node. If this node is not put before returning, it could cause a
memory leak. Hence put search before a mid-loop return statement.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190724083231.10276-1-nishkadg.linux@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-01 14:07:46 +01:00
Axel Lin a853c0a0b0
regulator: lp87565: Fix probe failure for "ti,lp87565"
The "ti,lp87565" compatible string is still in of_lp87565_match_table,
but current code will return -EINVAL because lp87565->dev_type is unknown.
This was working in earlier kernel versions, so fix it.

Fixes: 7ee63bd747 ("regulator: lp87565: Add 4-phase lp87561 regulator support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20190711113517.26077-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-24 17:03:34 +01:00
Mark Brown 27988c9668 Linus 5.3-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0006weHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGaDUIAJ4oTyVWpMRZkfG6
 vVY8qVMU3zlzEqRiyLYjkXoe/mGpuU/UVTyyStllxZ+Gg9da0mGwlugScKriPJof
 4KRUDDTGX5DrfEOo+0brKvM+PYh9uGViPgKXzyv7i6BrnX2z3JdBR4bKNuEYlAJ9
 N93Qg7v05SBHIq2Gfp3klrdWbsTTW2EaDTLbcgifXLnfKyFr47kwsmXAHPlTFP0p
 dYsZHHmf14Y9n1+ToZeVINgjQFr6mFn6ygY/PqTnd6vCgEEfP9eENJ4BZCtN1ZL/
 V0BO9MyJ5iZV0AfwSEKydk+kDEvO16TG/nyDrECVuur7AXsBx18ZplVc787f6GK+
 dyCQJ3U=
 =XLAF
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl04gIsTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0GCzB/9mJUNK51Spx8Pxrr8TRpoqgEOX/HO1
 0+cdS0Rj6F7UPEJ2VMjstuAsBgabY8Xxh3SL+FZPkKvDdCihwSxlSrWOV5Zf+pq2
 VaDr6NLVf6QssX21ei5tfDkMifOEoqRLfDrOhkm+y3u0IBvCPW/MNJW/VAriTV/P
 hu4ZIX6w/FrcfMzVXdRavj+cqZAiiGwXy52/U3on+cFc8vqFYQqYqcyO+est2zZp
 kPrLLBDhGc2waUyxAfY27R7Wy43TU3yrEdK7X4qPLUWXyicG3yi0WtogaJXuxcjR
 2AGE67I6+a57C2SJlnPHn+KIHF8HaSZ5mIVpwvvFxzgfENEaIgLDyqTK
 =tA+Q
 -----END PGP SIGNATURE-----

Merge tag 'v5.3-rc1' into regulator-5.3

Linus 5.3-rc1
2019-07-24 17:00:06 +01:00
Jernej Skrabec 8f46e22b5a
regulator: axp20x: fix DCDC5 and DCDC6 for AXP803
Refactoring of axp20x driver introduced a bug in AXP803's DCDC6
regulator definition. AXP803_DCDC6_1120mV_STEPS was obtained by
subtracting 0x47 and 0x33. This should be 0x14 (hex) and not 14
(dec).

Refactoring also carried over a bug in DCDC5 regulator definition.
Number of possible voltages must be for 1 bigger than maximum valid
voltage index, because 0 is also valid and it means lowest voltage.

Fixes: 1dbe0ccb06 ("regulator: axp20x-regulator: add support for AXP803")
Fixes: db4a555f7c ("regulator: axp20x: use defines for masks")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20190713090717.347-3-jernej.skrabec@siol.net
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-16 19:14:14 +01:00
Jernej Skrabec 1ef55fed92
regulator: axp20x: fix DCDCA and DCDCD for AXP806
Refactoring of the driver introduced bugs in AXP806's DCDCA and DCDCD
regulator definitions.

In DCDCA case, AXP806_DCDCA_1120mV_STEPS was obtained by subtracting
0x47 and 0x33. This should be 0x14 (hex) and not 14 (dec).

In DCDCD case, axp806_dcdcd_ranges[] contains two ranges with same
start and end macros, which is clearly wrong. Second range starts at
1.6V so it should use AXP806_DCDCD_1600mV_[START|END] macros. They are
already defined but unused.

Fixes: db4a555f7c ("regulator: axp20x: use defines for masks")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20190713090717.347-2-jernej.skrabec@siol.net
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-16 19:13:57 +01:00
Linus Torvalds 8de262531f - Core Frameworks
- Set 'struct device' fwnode when registering a new device
 
  - New Drivers
    - Add support for ROHM BD70528 PMIC
 
  - New Device Support
    - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
    - Add support for RK809 and RK817 to Rockchip RK808
    - Add support for Lid Angle to ChromeOS core
    - Add support for CS47L15 CODEC to Madera core
    - Add support for CS47L92 CODEC to Madera core
    - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
    - Add support for Add Intel Elkhart Lake PCH to Intel LPSS
 
  - New Functionality
    - Provide regulator supply information when registering; madera-core
    - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
    - Allow over-riding power button press via Device Tree; rohm-bd718x7
    - Differentiate between running processors; cros_ec_dev
 
  - Fix-ups
    - Big header file update; cros_ec_commands.h
    - Split header per-subsystem; rohm-bd718x7
    - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
    - Trivial; sorting, coding style; intel-lpss-pci
    - Only remove Power Off functionality if set locally; rk808
    - Make use for Power Off Prepare(); rk808
    - Fix spelling mistake in header guards; stmfx
    - Properly free IDA resources
    - SPDX fixups; cs47lXX-tables, madera
    - Error path fixups; hi655x-pmic
 
  - Bug Fixes
    - Add missing break in case() statement
    - Repair undefined behaviour when not initialising variables; arizona-core, madera-core
    - Fix reference to Device Tree documentation; madera
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl0sLxgACgkQUa+KL4f8
 d2E25Q/9HmDJIdfyDQg0xv5IM5HS1WsP9BcJCEgoRIsad4mMDRYt+ZeLbslwMhue
 E9tsFH359gGvyqR+7d6hPpEUET1UEcJy4eRD1zAc0+epllQTDHSy8oHt1dtH+8xB
 2AU5rvAKOqBk83D+V2Hkx2KcroWEQQNYIoR9/12Pi3xmEB1uaCO0/Ajd3B28bIBM
 Tzi3cVQ3U7jY9EIM44GVTsjDAbMSkQR0iab6cQF0vJAWaUmGKlsO7iRrU1XkN69V
 qXyBauI8WGiGssihrE8r+jYvHvmg7hA9OKZIckUaMXD/k7kpHbwIaFRh7gukq4Re
 Q6Cy30NfVJ1tY66/5oqN6gj5znfeuEudMCCzYAkzlROSp5eApe2Ke5ajYn3kOCZd
 ZKcsrw9Fiox1lKmuWXDbyf0nqf4zwdDPAnShRWaaF5aipwgywyGcwSigVtK4F0P5
 Hjc5RLv7GjTAJq+ZzwgKyAdtx8L0mhdLd1ZTQpEXk/g/E9dW4GF72hWj9TQ/9BnA
 ZflKv8aP3lDGRHgO3Huwi4lMzskB8BVCQMCFwLwGs5cY1oZQhAjTdJzBZjTGexhC
 evuuA8OUsCrOWMvnZf3saSdHJ1iMHtfPnqEGHRJQtNj4fFaXv80LasIomvvfJc1/
 9JlRyAgm2pF7YDrgTh65ZzBb324eKSZZoAj9XZbnTyzxUAcF69A=
 =A3jw
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Set 'struct device' fwnode when registering a new device

  New Drivers:
   - Add support for ROHM BD70528 PMIC

  New Device Support:
   - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
   - Add support for RK809 and RK817 to Rockchip RK808
   - Add support for Lid Angle to ChromeOS core
   - Add support for CS47L15 CODEC to Madera core
   - Add support for CS47L92 CODEC to Madera core
   - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
   - Add support for Add Intel Elkhart Lake PCH to Intel LPSS

  New Functionality:
   - Provide regulator supply information when registering; madera-core
   - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
   - Allow over-riding power button press via Device Tree; rohm-bd718x7
   - Differentiate between running processors; cros_ec_dev

  Fix-ups:
   - Big header file update; cros_ec_commands.h
   - Split header per-subsystem; rohm-bd718x7
   - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
   - Trivial; sorting, coding style; intel-lpss-pci
   - Only remove Power Off functionality if set locally; rk808
   - Make use for Power Off Prepare(); rk808
   - Fix spelling mistake in header guards; stmfx
   - Properly free IDA resources
   - SPDX fixups; cs47lXX-tables, madera
   - Error path fixups; hi655x-pmic

  Bug Fixes:
   - Add missing break in case() statement
   - Repair undefined behaviour when not initialising variables; arizona-core, madera-core
   - Fix reference to Device Tree documentation; madera"

* tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
  mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk
  mfd: madera: Fixup SPDX headers
  mfd: madera: Remove some unused registers and fix some defaults
  mfd: intel-lpss: Release IDA resources
  mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs
  mfd: cs5535-mfd: Remove ifdef OLPC noise
  mfd: stmfx: Fix macro definition spelling
  dt-bindings: mfd: Add link to ROHM BD71847 Datasheet
  MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
  mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice
  mfd: rk808: Prepare rk805 for poweroff
  mfd: rk808: Check pm_power_off pointer
  mfd: cros_ec: differentiate SCP from EC by feature bit
  dt-bindings: Add binding for cros-ec-rpmsg
  mfd: madera: Add Madera core support for CS47L92
  mfd: madera: Add Madera core support for CS47L15
  mfd: madera: Update DT bindings to add additional CODECs
  mfd: madera: Add supply mapping for MICVDD
  mfd: madera: Fix potential uninitialised use of variable
  mfd: madera: Fix bad reference to pinctrl.txt file
  ...
2019-07-15 20:18:40 -07:00
Linus Torvalds e9a83bd232 It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro.  These create more
    than the usual number of simple but annoying merge conflicts with other
    trees, unfortunately.  He has a lot more of these waiting on the wings
    that, I think, will go to you directly later on.
 
  - A new document on how to use merges and rebases in kernel repos, and one
    on Spectre vulnerabilities.
 
  - Various improvements to the build system, including automatic markup of
    function() references because some people, for reasons I will never
    understand, were of the opinion that :c:func:``function()`` is
    unattractive and not fun to type.
 
  - We now recommend using sphinx 1.7, but still support back to 1.4.
 
  - Lots of smaller improvements, warning fixes, typo fixes, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl0krAEPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5Yg98H/AuLqO9LpOgUjF4LhyjxGPdzJkY9RExSJ7km
 gznyreLCZgFaJR+AY6YDsd4Jw6OJlPbu1YM/Qo3C3WrZVFVhgL/s2ebvBgCo50A8
 raAFd8jTf4/mGCHnAqRotAPQ3mETJUk315B66lBJ6Oc+YdpRhwXWq8ZW2bJxInFF
 3HDvoFgMf0KhLuMHUkkL0u3fxH1iA+KvDu8diPbJYFjOdOWENz/CV8wqdVkXRSEW
 DJxIq89h/7d+hIG3d1I7Nw+gibGsAdjSjKv4eRKauZs4Aoxd1Gpl62z0JNk6aT3m
 dtq4joLdwScydonXROD/Twn2jsu4xYTrPwVzChomElMowW/ZBBY=
 =D0eO
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.3' of git://git.lwn.net/linux

Pull Documentation updates from Jonathan Corbet:
 "It's been a relatively busy cycle for docs:

   - A fair pile of RST conversions, many from Mauro. These create more
     than the usual number of simple but annoying merge conflicts with
     other trees, unfortunately. He has a lot more of these waiting on
     the wings that, I think, will go to you directly later on.

   - A new document on how to use merges and rebases in kernel repos,
     and one on Spectre vulnerabilities.

   - Various improvements to the build system, including automatic
     markup of function() references because some people, for reasons I
     will never understand, were of the opinion that
     :c:func:``function()`` is unattractive and not fun to type.

   - We now recommend using sphinx 1.7, but still support back to 1.4.

   - Lots of smaller improvements, warning fixes, typo fixes, etc"

* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
  docs: automarkup.py: ignore exceptions when seeking for xrefs
  docs: Move binderfs to admin-guide
  Disable Sphinx SmartyPants in HTML output
  doc: RCU callback locks need only _bh, not necessarily _irq
  docs: format kernel-parameters -- as code
  Doc : doc-guide : Fix a typo
  platform: x86: get rid of a non-existent document
  Add the RCU docs to the core-api manual
  Documentation: RCU: Add TOC tree hooks
  Documentation: RCU: Rename txt files to rst
  Documentation: RCU: Convert RCU UP systems to reST
  Documentation: RCU: Convert RCU linked list to reST
  Documentation: RCU: Convert RCU basic concepts to reST
  docs: filesystems: Remove uneeded .rst extension on toctables
  scripts/sphinx-pre-install: fix out-of-tree build
  docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
  Documentation: PGP: update for newer HW devices
  Documentation: Add section about CPU vulnerabilities for Spectre
  Documentation: platform: Delete x86-laptop-drivers.txt
  docs: Note that :c:func: should no longer be used
  ...
2019-07-09 12:34:26 -07:00
Linus Torvalds 98537ee92f regulator: Updates for v5.3
A couple of new features in the core, the most interesting one
 being support for complex regulator coupling configurations
 initially targeted at nVidia Tegra SoCs, and some new drivers but
 otherwise quite a quiet release.
 
  - Core support for gradual ramping of voltages for devices that
    can't manage large changes in hardware from Bartosz Golaszewski.
  - Core support for systems that have complex coupling requirements
    best described via code, contributed by Dmitry Osipenko.
  - New drivers for Dialog SLG51000, Qualcomm PM8005 and ST
    Microelectronics STM32-Booster.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0jIZwTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0PG+B/9EQnjM29THpBKM6bKdl8cYcf3Hq/FX
 KNtXjwaTM0DqYtpk1RkaHgecxTJwesJ0k9AYijh0ieeMhb5UES280+6B4NqPb7xr
 UmFBbNcdk9G+x9q1TyT8akRMkCugEMscQodyk4npzZRjGv8qUsNJUY71Bq2T/JJx
 QXo5fKlWICzBahF87DCB5pKC7PKfNkx3BWCrGGXOqoBX2ZEKytyWlCa0nGUZ+LqL
 GqXmmIjKL7H8MP3avmrrRHYpeF5DLXAzH+HEIM9Y0F1cRcdgOS1Exv2eG+90a634
 yybVDBX2d5zfiEIoRnpldtB52EGXjvwbo7w1mFwh9UgJRbOCZgb+ZQXT
 =26r6
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A couple of new features in the core, the most interesting one being
  support for complex regulator coupling configurations initially
  targeted at nVidia Tegra SoCs, and some new drivers but otherwise
  quite a quiet release.

  Summary:

   - Core support for gradual ramping of voltages for devices that can't
     manage large changes in hardware from Bartosz Golaszewski.

   - Core support for systems that have complex coupling requirements
     best described via code, contributed by Dmitry Osipenko.

   - New drivers for Dialog SLG51000, Qualcomm PM8005 and ST
     Microelectronics STM32-Booster"

* tag 'regulator-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
  regulator: max77650: use vsel_step
  regulator: implement selector stepping
  regulator: max77650: add MODULE_ALIAS()
  regulator: max77620: remove redundant assignment to variable ret
  dt-bindings: regulator: add support for the stm32-booster
  regulator: add support for the stm32-booster
  regulator: s2mps11: Adjust supported buck voltages to real values
  regulator: s2mps11: Fix buck7 and buck8 wrong voltages
  gpio: Fix return value mismatch of function gpiod_get_from_of_node()
  regulator: core: Expose some of core functions needed by couplers
  regulator: core: Introduce API for regulators coupling customization
  regulator: s2mps11: Add support for disabling S2MPS11 regulators in suspend
  regulator: s2mps11: Reduce number of rdev_get_id() calls
  regulator: qcom_spmi: Do NULL check for lvs
  regulator: qcom_spmi: Fix math of spmi_regulator_set_voltage_time_sel
  regulator: da9061/62: Adjust LDO voltage selection minimum value
  regulator: s2mps11: Fix ERR_PTR dereference on GPIO lookup failure
  regulator: qcom_spmi: add PMS405 SPMI regulator
  dt-bindings: qcom_spmi: Document pms405 support
  arm64: dts: msm8998-mtp: Add pm8005_s1 regulator
  ...
2019-07-09 09:15:03 -07:00
Linus Torvalds 8a3367cc80 LED updates for 5.3-rc1
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXRozKAAKCRBiEGxRG/Sl
 25okAP9I0Rmscpqjb/+GEeXH4EmL3moGzc9o/BzHRqfeO4wqYAEA+8f7L20xHe8g
 tvEGfP7mN/oBmcAfqgH5K9F4eJsBRAw=
 =NkCn
 -----END PGP SIGNATURE-----

Merge tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:

 - Add a new LED common module for ti-lmu driver family

 - Modify MFD ti-lmu bindings
        - add ti,brightness-resolution
        - add the ramp up/down property

 - Add regulator support for LM36274 driver to lm363x-regulator.c

 - New LED class drivers with DT bindings:
        - leds-spi-byte
        - leds-lm36274
        - leds-lm3697 (move the support from MFD to LED subsystem)

 - Simplify getting the I2C adapter of a client:
        - leds-tca6507
        - leds-pca955x

 - Convert LED documentation to ReST

* tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  dt: leds-lm36274.txt: fix a broken reference to ti-lmu.txt
  docs: leds: convert to ReST
  leds: leds-tca6507: simplify getting the adapter of a client
  leds: leds-pca955x: simplify getting the adapter of a client
  leds: lm36274: Introduce the TI LM36274 LED driver
  dt-bindings: leds: Add LED bindings for the LM36274
  regulator: lm363x: Add support for LM36274
  mfd: ti-lmu: Add LM36274 support to the ti-lmu
  dt-bindings: mfd: Add lm36274 bindings to ti-lmu
  leds: max77650: Remove set but not used variable 'parent'
  leds: avoid flush_work in atomic context
  leds: lm3697: Introduce the lm3697 driver
  mfd: ti-lmu: Remove support for LM3697
  dt-bindings: ti-lmu: Modify dt bindings for the LM3697
  leds: TI LMU: Add common code for TI LMU devices
  leds: spi-byte: add single byte SPI LED driver
  dt-bindings: leds: Add binding for spi-byte LED.
  dt-bindings: mfd: LMU: Add ti,brightness-resolution
  dt-bindings: mfd: LMU: Add the ramp up/down property
2019-07-09 08:59:39 -07:00
Mark Brown 0ed4513c9a
Merge remote-tracking branch 'regulator/topic/coupled' into regulator-next 2019-07-04 17:34:34 +01:00
Mark Brown 65244e5b1f
Merge branch 'regulator-5.3' into regulator-next 2019-07-04 17:34:32 +01:00
Mark Brown f0386617dc
Merge branch 'regulator-5.2' into regulator-linus 2019-07-04 17:34:30 +01:00
Bartosz Golaszewski 3c7577d442
regulator: max77650: use vsel_step
Use the new vsel_step field in the regulator description to instruct
the regulator API on the required voltage ramping. Switch to using the
generic regmap helpers for voltage setting and remove the old set_voltage
callback that handcoded the selector stepping.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20190703161035.31808-3-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-04 17:31:37 +01:00
Bartosz Golaszewski 2da8d9473e
regulator: implement selector stepping
Some regulators require that the requested voltage be reached gradually
by setting all or some of the intermediate values. Implement a new field
in the regulator description struct that allows users to specify the
number of selectors by which the regulator API should step when ramping
the voltage up/down.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20190703161035.31808-2-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-04 17:07:25 +01:00
Bartosz Golaszewski ba2bf340ad
regulator: max77650: add MODULE_ALIAS()
Define a MODULE_ALIAS() in the regulator sub-driver for max77650 so that
the appropriate module gets loaded together with the core mfd driver.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20190703084849.9668-1-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-03 13:02:59 +01:00
Colin Ian King a3c7c029c3
regulator: max77620: remove redundant assignment to variable ret
The variable ret is being initialized with a value that is never
read and it is being updated later with a new value. The
initialization is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190703082009.18779-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-03 13:02:38 +01:00
Fabrice Gasnier 4e210fbeee
regulator: add support for the stm32-booster
Add support for the 3.3V booster regulator embedded in stm32h7 and stm32mp1
devices, that can be used to supply ADC analog input switches.

This regulator is supplied by vdda. It's controlled by using SYSCFG:
- STM32H7 has a unique register to set/clear the booster enable bit
- STM32MP1 has separate set and clear registers to configure it.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-02 12:45:12 +01:00
Krzysztof Kozlowski 9d83dcb3e4
regulator: s2mps11: Adjust supported buck voltages to real values
The driver was registering buck regulators with unsupported range of
voltages for S2MPS11 devices.  Basically it assumed that all 256 values
are possible for a single 8-bit I2C register controlling buck's voltage.
This is not true, as datasheet describes subset of these which can be
used.

For example for buck[12346] the minimum voltage is 650 mV which
corresponds to register value of 0x8.  The driver was however
registering regulator starting at 600 mV, so for a step of 6.25 mV this
gave the same result.  However this allowed to try to configure
regulators to unsupported values.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-02 12:43:25 +01:00
Krzysztof Kozlowski 16da0eb5ab
regulator: s2mps11: Fix buck7 and buck8 wrong voltages
On S2MPS11 device, the buck7 and buck8 regulator voltages start at 750
mV, not 600 mV.  Using wrong minimal value caused shifting of these
regulator values by 150 mV (e.g. buck7 usually configured to v1.35 V was
reported as 1.2 V).

On most of the boards these regulators are left in default state so this
was only affecting reported voltage.  However if any driver wanted to
change them, then effectively it would set voltage 150 mV higher than
intended.

Cc: <stable@vger.kernel.org>
Fixes: cb74685ecb ("regulator: s2mps11: Add samsung s2mps11 regulator driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-02 12:43:05 +01:00
Lee Jones 8e23cee84c Merge branches 'ib-mfd-clk-gpio-power-regulator-rtc-5.3', 'ib-mfd-clk-regulator-rtc-5.3', 'ib-mfd-cros-5.3' and 'ib-mfd-regulator-5.3' into ibs-for-mfd-merged 2019-07-02 12:10:53 +01:00
Colin Ian King f3f4363b12 regulator: lp87565: Fix missing break in switch statement
Currently the LP87565_DEVICE_TYPE_LP87561_Q1 case does not have a
break statement, causing it to fall through to a dev_err message.
Fix this by adding in the missing break statement.

Addresses-Coverity: ("Missing break in switch")
Fixes: 7ee63bd747 ("regulator: lp87565: Add 4-phase lp87561 regulator support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02 11:41:23 +01:00
Heiko Stuebner e444f6d68c regulator: rk808: Add RK809 and RK817 support.
Add support for the rk809 and rk817 regulator driver.
    Their specifications are as follows:
    1. The RK809 and RK809 consist of 5 DCDCs, 9 LDOs
       and have the same registers for these components except dcdc5.
    2. The dcdc5 is a boost dcdc for RK817 and is a buck for RK809.
    3. The RK817 has one switch but The Rk809 has two.

    The output voltages are configurable and are meant to supply power
    to the main processor and other components.

Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
Acked-by: Mark Brown <broonie@kernel.org>
[rebased on top of 5.2-rc1]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27 14:57:31 +01:00
Matti Vaittinen 2a6a7aacd4 mfd: regulator: clk: Split rohm-bd718x7.h
Split the bd718x7.h to ROHM common and bd718x7 specific parts
so that we do not need to add same things in every new ROHM
PMIC header. Please note that this change requires changes also
in bd718x7 sub-device drivers for regulators and clk.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27 10:56:27 +01:00
Waibel Georg 025bf37725
gpio: Fix return value mismatch of function gpiod_get_from_of_node()
In case the requested gpio property is not found in the device tree, some
callers of gpiod_get_from_of_node() expect a return value of NULL, others
expect -ENOENT.
In particular devm_fwnode_get_index_gpiod_from_child() expects -ENOENT.
Currently it gets a NULL, which breaks the loop that tries all
gpio_suffixes. The result is that a gpio property is not found, even
though it is there.

This patch changes gpiod_get_from_of_node() to return -ENOENT instead
of NULL when the requested gpio property is not found in the device
tree. Additionally it modifies all calling functions to properly
evaluate the return value.

Another approach would be to leave the return value of
gpiod_get_from_of_node() as is and fix the bug in
devm_fwnode_get_index_gpiod_from_child(). Other callers would still need
to be reworked. The effort would be the same as with the chosen solution.

Signed-off-by: Georg Waibel <georg.waibel@sensor-technik.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25 15:26:24 +01:00
Dmitry Osipenko d22b85a1b9
regulator: core: Expose some of core functions needed by couplers
Expose some of internal functions that are required for implementation of
customized regulator couplers.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25 12:15:35 +01:00
Dmitry Osipenko d8ca7d184b
regulator: core: Introduce API for regulators coupling customization
Right now regulator core supports only one type of regulators coupling,
the "voltage max-spread" which keeps voltages of coupled regulators in a
given range from each other. A more sophisticated coupling may be required
in practice, one example is the NVIDIA Tegra SoCs which besides the
max-spreading have other restrictions that must be adhered. Introduce API
that allow platforms to provide their own customized coupling algorithms.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25 12:15:32 +01:00
Krzysztof Kozlowski 65d80db2ee
regulator: s2mps11: Add support for disabling S2MPS11 regulators in suspend
The driver supported turning off regulators in suspend only for S2MPS14
device.  However this makes also sense for S2MPS11 and can reduce the
power consumption during suspend to RAM.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-24 17:26:57 +01:00
Krzysztof Kozlowski df33799c5c
regulator: s2mps11: Reduce number of rdev_get_id() calls
Store the regulator ID instead of calling rdev_get_id() every time.
This makes code slightly easier to read as shorter 'rdev_id' variable is
used instead of full call.  This can also speed things up by reducing
number of calls, although effect was not measured.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-24 17:26:36 +01:00
Jeffrey Hugo b01d182325
regulator: qcom_spmi: Do NULL check for lvs
Low-voltage switches (lvs) don't have set_points since the voltage ranges
of the output are really controlled by the inputs.  This is a problem for
the newly added linear range support in the probe(), as that will cause
a null pointer dereference error on older platforms like msm8974 which
happen to need to control some of the implemented lvs.

Fix this by adding the appropriate null check.

Fixes: 86f4ff7a0c ("regulator: qcom_spmi: enable linear range info")
Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-24 17:26:15 +01:00
Jeffrey Hugo 61d7fdc49f
regulator: qcom_spmi: Fix math of spmi_regulator_set_voltage_time_sel
spmi_regulator_set_voltage_time_sel() calculates the amount of delay
needed as the result of setting a new voltage.  Essentially this is the
absolute difference of the old and new voltages, divided by the slew rate.

The implementation of spmi_regulator_set_voltage_time_sel() is wrong.

It attempts to calculate the difference in voltages by using the
difference in selectors and multiplying by the voltage step between
selectors.  This ignores the possibility that the old and new selectors
might be from different ranges, which have different step values.  Also,
the difference between the selectors may encapsulate N ranges inbetween,
so a summation of each selector change from old to new would be needed.

Lets avoid all of that complexity, and just get the actual voltage
represented by both the old and new selector, and use those to directly
compute the voltage delta.  This is more straight forward, and has the
side benifit of avoiding issues with regulator implementations that don't
have hardware register support to get the current configured range.

Fixes: e92a404741 ("regulator: Add QCOM SPMI regulator driver")
Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reported-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20 14:18:57 +01:00
Felix Riemann fd5d10059d
regulator: da9061/62: Adjust LDO voltage selection minimum value
According to the DA9061 and DA9062 datasheets the LDO voltage selection
registers have a lower value of 0x02. This applies to voltage registers
VLDO1_A, VLDO2_A, VLDO3_A and VLDO4_A. This linear offset of 0x02 was
previously not observed by the driver, causing the LDO output voltage to
be systematically lower by two steps (= 0.1V).

This patch fixes the minimum linear selector offset by setting it to a
value of 2 and increases the n_voltages by the same amount allowing
voltages in the range 0x02 -> 0.9V to 0x38 -> 3.6V to be correctly
selected. Also fixes an incorrect calculaton for the n_voltages value in
the regulator LDO2.

These fixes effect all LDO regulators for DA9061 and DA9062.

Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Felix Riemann <felix.riemann@sma.de>
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20 13:07:19 +01:00
Krzysztof Kozlowski 70ca117b02
regulator: s2mps11: Fix ERR_PTR dereference on GPIO lookup failure
If devm_gpiod_get_from_of_node() call returns ERR_PTR, it is assigned
into an array of GPIO descriptors and used later because such error is
not treated as critical thus it is not propagated back to the probe
function.

All code later expects that such GPIO descriptor is either a NULL or
proper value.  This later might lead to dereference of ERR_PTR.

Only devices with S2MPS14 flavor are affected (other do not control
regulators with GPIOs).

Fixes: 1c984942f0 ("regulator: s2mps11: Pass descriptor instead of GPIO number")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20 13:04:40 +01:00
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Jorge Ramirez 0211f68e62
regulator: qcom_spmi: add PMS405 SPMI regulator
The PMS405 has 5 HFSMPS and 13 LDO regulators,

This commit adds support for one of the 5 HFSMPS regulators (s3) to
the spmi regulator driver.

The PMIC HFSMPS 430 regulators have 8 mV step size and a voltage
control scheme consisting of two  8-bit registers defining a 16-bit
voltage set point in units of millivolts

S3 controls the cpu voltages (s3 is a buck regulator of type HFS430);
it is therefore required so we can enable voltage scaling for safely
running cpufreq.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-18 19:28:23 +01:00
Jeffrey Hugo 42ba89c8bb
regulator: qcom_spmi: Add support for PM8005
The PM8005 is used on the msm8998 MTP.  The S1 regulator is VDD_GFX, ie
it needs to be on and controlled inorder to use the GPU.  Add support to
drive the PM8005 regulators so that we can bring up the GPU on msm8998.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-18 19:27:35 +01:00
Mark Brown f2c6203fdd
regulator: core: Make entire header comment C++ style
Makes things look more consistent.

Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-18 19:13:05 +01:00
Mark Brown e1d700f7c9 Linux 5.2-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlz8fAYeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1asH/3ySguxqtqL1MCBa
 4/SZ37PHeWKMerfX6ZyJdgEqK3B+PWlmuLiOMNK5h2bPLzeQQQAmHU/mfKmpXqgB
 dHwUbG9yNnyUtTfsfRqAnCA6vpuw9Yb1oIzTCVQrgJLSWD0j7scBBvmzYqguOkto
 ThwigLUq3AILr8EfR4rh+GM+5Dn9OTEFAxwil9fPHQo7QoczwZxpURhScT6Co9TB
 DqLA3fvXbBvLs/CZy/S5vKM9hKzC+p39ApFTURvFPrelUVnythAM0dPDJg3pIn5u
 g+/+gDxDFa+7ANxvxO2ng1sJPDqJMeY/xmjJYlYyLpA33B7zLNk2vDHhAP06VTtr
 XCMhQ9s=
 =cb80
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0JKaQTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0DIWB/9IWGRWWkTE3XNNrG3D32aP/KMPMJcG
 2ojsLawEX/URJerfR5ofvleTeb3AoE8N4jWFtXc5BcqB7OtcNNKSlKlxt3rrYO5v
 hbyd9Cc+q82iLAPwTFkLNU3MU2vZS9Q81j268lONPtEgiWDpbB2TZ52LINQ5FF+T
 D/U8ERI29nrHDQ+gSi2NLBbBuQNZqb6MIGga2e1wdJVA7NuH6rIkfFAz4oB/vFmR
 HiVTFmNjSCgb9HX9K4b0BsokFkriy5/UWCYZzjwRDQ+TjxioXkUccYZpMqfFI30F
 EfjcwxgqIbQS4cDta4bK09T0s7vUpFiNxWh7clxc2qLBrFijTKxLlNOB
 =nQaU
 -----END PGP SIGNATURE-----

Merge tag 'v5.2-rc4' into regulator-5.3

Linux 5.2-rc4
2019-06-18 19:12:47 +01:00
Jeffrey Hugo ba576a6232
regulator: qcom_spmi: Refactor get_mode/set_mode
spmi_regulator_common_get_mode and spmi_regulator_common_set_mode use
multi-level ifs which mirror a switch statement.  Refactor to use a switch
statement to make the code flow more clear.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17 15:50:11 +01:00
Jorge Ramirez-Ortiz 86f4ff7a0c
regulator: qcom_spmi: enable linear range info
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17 15:49:48 +01:00
Keerthy 7ee63bd747 regulator: lp87565: Add 4-phase lp87561 regulator support
The LP8756x family has a single output 4-phase regulator
configuration. Add support for the same. The control
lies in the master buck which is buck0 for 4-phase
configuration. Enable/disable/voltage set happen via
buck0 registers.

Data Sheet: https://www.ti.com/lit/ds/symlink/lp87561-q1.pdf

Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-17 08:00:24 +01:00
Mauro Carvalho Chehab 458f69ef36 docs: timers: convert docs to ReST and rename to *.rst
The conversion here is really trivial: just a bunch of title
markups and very few puntual changes is enough to make it to
be parsed by Sphinx and generate a nice html.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-14 14:31:48 -06:00
Linus Walleij fd742eaab8
regulator: max8952: Convert to use GPIO descriptors
This finalizes the descriptor conversion of the MAX8952 driver
by letting the VID0 and VID1 GPIOs be fetched from descriptors.

Both VID0 and VID1 must be supplied for the VID selection to work,
I add some code to preserve the semantics that if only one of
the two VID gpios is supplied, it will be initialized to low.
This might be a bit overzealous, but I want to preserve any
implicit semantics.

This is currently only used by device tree in-kernel but it is
still also possible to supply the same GPIOs using a machine
descriptor table if a board file is used.

Ideally this should be phased over to using gpio-regulator.c
that does the same thing, but it might require some refactoring
and needs testing on real hardware.

Cc: Tomasz Figa <tfiga@chromium.org>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-13 16:47:29 +01:00
Anders Roxell 6f10419187
regulator: 88pm800: fix warning same module names
When building with CONFIG_MFD_88PM800 and CONFIG_REGULATOR_88PM800
enabled as loadable modules, we see the following warning:

warning: same module names found:
  drivers/regulator/88pm800.ko
  drivers/mfd/88pm800.ko

Rework so that the file is named 88pm800-regulator.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-12 16:56:03 +01:00
Linus Walleij 9a5ed0bac8
regulator: wm831x: Convert to use GPIO descriptors
This converts the Wolfson Micro WM831x DCDC converter to use
a GPIO descriptor for the GPIO driving the DVS pin.

There is just one (non-DT) machine in the kernel using this, and
that is the Wolfson Micro (now Cirrus) Cragganmore 6410 so we
patch this board to pass a descriptor table and fix up the driver
accordingly.

Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-12 13:59:11 +01:00
Linus Torvalds 5e3b6b8ecc regulator: Fix for v5.2
Just one driver specific fix here, for a boot regression introduced
 during some modernization work on the tps6507x driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlz+aOcTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0PtiB/96XSSJtLQxArYN2tnTPzeq2asZK3y6
 nH1r+d9GAbAj8rIzO9qRSEz/x9oZcikYqR2QdyXSI4pJNH+KRbNpktMTq5HHtm7E
 9KNRtz8Ni4dR6Paz04vWA2gUaEps5uMCMDKk38gnL21PLQlaaAn4M0TN/iBBLdgR
 8n8tTgPez6gyqtZZ17cwyHAKh4z7Vln5Ps+dyHwLbbzXg0RFwGwRXXIVLFfnGu9E
 euBinP6MS3SYvbgnas0+5uXbpGNhXeVPSKnP+muRvTkCs9TxjgV55IUhrWaxXb3+
 mrhgElvZ45AwqpQbyQ1+dW7nXQhzFLK6YCVD25BfNe5iq4o1GAjI61CJ
 =Dz+r
 -----END PGP SIGNATURE-----

Merge tag 'regulator-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "Just one driver specific fix here, for a boot regression introduced
  during some modernization work on the tps6507x driver"

* tag 'regulator-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps6507x: Fix boot regression due to testing wrong init_data pointer
2019-06-10 07:35:55 -10:00
Linus Walleij d17adf7d3f
regulator: max77802: Drop unused includes
This driver does not use any symbols from <linux/gpio.h>
no <linux/gpio/consumer.h> so just drop the includes.

Cc: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-10 15:40:58 +01:00
Wolfram Sang 6b96092a6b
regulator: max8952: simplify getting the adapter of a client
We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-10 15:40:36 +01:00
Geert Uytterhoeven 25a7d03dae
regulator: cpcap: Spelling s/configuraion/configuration/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-07 13:14:37 +01:00
Dan Murphy bff5e80715 regulator: lm363x: Add support for LM36274
Adding regulator support for the LM36274 backlight driver.
This device can leverage this existing code as the functionality
and registers are common enough between the LM36274 and the LM363x
series of devices.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-06-06 20:38:38 +02:00
Thomas Gleixner d925da5c7b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published bythe free software foundation

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 5 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190116.345887520@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:18 +02:00