Commit Graph

1371 Commits

Author SHA1 Message Date
Ondrej Zary 6994ca3df1 [media] tea575x: split and export functions
Split ioctl interface from enum_freq_bands, g_tuner and s_hw_freq_seek
functions and export them to be used in other drivers like bttv.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27 10:13:50 -02:00
Hans Verkuil 861360a56d [media] videobuf: make unused exported functions static
The videobuf_dma_init* and videobuf_dma_map() functions are no longer
used except in videobuf-dma-sg.c itself. Make them static.

These functions were abused in various drivers. All those drivers
have now been fixed, so by no longer exporting these functions
future abuse is now prevented.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27 10:01:33 -02:00
Sakari Ailus ec176a6f14 [media] smiapp: Use types better suitable for DT
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-23 11:29:38 -02:00
Hans Verkuil 17028cdb74 [media] v4l2 core: improve debug flag handling
The old debug field is renamed to dev_debug to ensure that existing drivers
(including out-of-tree drivers) that try to use the old name will no longer
compile. A comment has also been added that makes it explicit that drivers
shouldn't use this field.

Additional bits have been added to the debug flag to be more fine-grained
when debugging, especially when dealing with streaming ioctls and read,
write and poll. You want to enable those explicitly to prevent flooding
the log when streaming unless you actually want to do that.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-23 10:31:37 -02:00
Hans Verkuil cb03893e3e [media] v4l2-subdev: drop unused op enum_mbus_fmt
Weird, this op isn't used at all. Seems to be orphaned code.
Remove it.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-22 18:13:24 -02:00
Hans Verkuil 05b9cc3eef [media] v4l2-subdev: drop get/set_crop pad ops
Drop the duplicate get/set_crop pad ops and only use get/set_selection.
It makes no sense to have two duplicate ops in the internal subdev API.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-22 18:12:36 -02:00
Hans Verkuil 215cedec37 [media] media: remove emacs editor variables
1) This is not allowed by the kernel coding style
2) Just configure your editor correctly
3) It's really ugly

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-22 17:52:20 -02:00
Josh Wu 91d63156c9 [media] media: v4l2-image-sizes.h: correct the SVGA height definition
SVGA height should be 600 not 680.

Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04 13:56:56 -02:00
Hans Verkuil 11ff030c73 [media] v4l2-mediabus: improve colorspace support
Add and copy the new ycbcr_enc and quantization fields.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-01 15:34:55 -02:00
Josh Wu 1cc6adfef4 [media] media: v4l2-image-sizes.h: add SVGA, XGA and UXGA size definitions
Add SVGA, UXGA and XGA size definitions to v4l2-image-sizes.h.
The definitions are sorted by alphabet order.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25 13:41:14 -02:00
Hans Verkuil 0c3a14c177 [media] vb2-dma-sg: add allocation context to dma-sg
Require that dma-sg also uses an allocation context. This is in preparation
for adding prepare/finish memops to sync the memory between DMA and CPU.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25 08:55:32 -02:00
Hans Verkuil d935c57e8f [media] vb2: add dma_dir to the alloc memop
This is needed for the next patch where the dma-sg alloc memop needs
to know the dma_dir.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25 08:51:44 -02:00
Hans Verkuil cd474037c4 [media] vb2: replace 'write' by 'dma_dir'
The 'write' argument is very ambiguous. I first assumed that if it is 1,
then we're doing video output but instead it meant the reverse.

Since it is used to setup the dma_dir value anyway it is now replaced by
the correct dma_dir value which is unambiguous.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25 08:50:28 -02:00
Hans Verkuil cf227429c7 [media] videobuf2-core.h: improve documentation
Document that drivers can access/modify the buffer contents in buf_prepare
and buf_finish. That was not clearly stated before.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25 08:47:24 -02:00
Hans Verkuil 4daee77976 [media] v4l2-common: move v4l2_ctrl_check to cx2341x
The v4l2_ctrl_check() helper function is now only used in cx2341x.
Move it there and make it static.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25 08:25:36 -02:00
Hans Verkuil 79fbc209f1 [media] v4l2-ctrl: move function prototypes from common.h to ctrls.h
For some unknown reason several control prototypes where in v4l2-common.c
instead of in v4l2-ctrls.h. Move them and document them.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25 08:24:10 -02:00
Hans Verkuil 4ed0d6a9cf [media] v4l2-common: remove unused helper functions
Several control helper functions are no longer needed since most drivers
are now converted to the control framework. So we can delete them.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25 08:22:25 -02:00
Sebastian Reichel bf2b892e66 [media] si4713: cleanup platform data
Remove unreferenced members from the platform
data's structure.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14 18:14:33 -02:00
Sebastian Reichel 98bea620c7 [media] si4713: add device tree support
Add device tree support by changing the device registration order.
In the device tree the si4713 node is a normal I2C device, which
will be probed as such. Thus the V4L device must be probed from
the I2C device and not the other way around.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14 18:08:19 -02:00
Boris BREZILLON 27ffaeb0ab [media] platform: Make use of media_bus_format enum
In order to have subsytem agnostic media bus format definitions we've
moved media bus definition to include/uapi/linux/media-bus-format.h and
prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT.

Reference new definitions in all platform drivers.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14 17:54:08 -02:00
Boris BREZILLON 32b32ce84a [media] Make use of the new media_bus_format definitions
Replace references to the v4l2_mbus_pixelcode enum with the new
media_bus_format enum in all common headers.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14 17:51:18 -02:00
Prabhakar Lad 7041bc997d [media] media: davinci: vpbe: add support for VIDIOC_CREATE_BUFS
this patch adds support for vidioc_create_bufs. Along side
remove unneeded member numbuffers.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-11 08:43:03 -02:00
Martin Kaiser 77d381af73 [media] lirc: use kfifo_initialized() on lirc_buffer's fifo
We can use kfifo_initialized() to check if the fifo in lirc_buffer is
initialized or not. There's no need to have a dedicated fifo status
variable in lirc_buffer.

[m.chehab@samsung.com: add the same change to lirc_zilog, to avoid
 breaking compilation of staging drivers]
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 12:53:05 -02:00
Prabhakar Lad 8a93dbc1f4 [media] media: davinci: vpbe: drop unused member memory from vpbe_layer
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28 16:11:37 -02:00
Prabhakar Lad 1b73f03cbf [media] media: davinci: vpbe: use helpers provided by core if streaming is started
this patch uses vb2_is_busy() helper to check if streaming is
actually started, instead of driver managing it.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28 16:11:15 -02:00
Prabhakar Lad 4bb1231a5f [media] media: davinci: vpbe: use fh handling provided by v4l
this patch converts the driver to use fh handling provided by the
v4l core instead of driver doing it.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28 16:09:08 -02:00
Mauro Carvalho Chehab a66d05d504 Merge branch 'patchwork' into v4l_for_linus
* patchwork: (544 commits)
  [media] ir-hix5hd2: fix build on c6x arch
  [media] pt3: fix DTV FE I2C driver load error paths
  Revert "[media] media: em28xx - remove reset_resume interface"
  [media] exynos4-is: fix some warnings when compiling on arm64
  [media] usb drivers: use %zu instead of %zd
  [media] pci drivers: use %zu instead of %zd
  [media] dvb-frontends: use %zu instead of %zd
  [media] s5p-mfc: Fix several printk warnings
  [media] s5p_mfc_opr: Fix warnings
  [media] ti-vpe: Fix typecast
  [media] s3c-camif: fix dma_addr_t printks
  [media] s5p_mfc_opr_v6: get rid of warnings when compiled with 64 bits
  [media] s5p_mfc_opr_v5: Fix lots of warnings on x86_64
  [media] em28xx: Fix identation
  [media] drxd: remove a dead code
  [media] saa7146: remove return after BUG()
  [media] cx88: remove return after BUG()
  [media] cx88: fix cards table CodingStyle
  [media] radio-sf16fmr2: declare some structs as static
  [media] radio-sf16fmi: declare pnp_attached as static
  ...

Conflicts:
	Documentation/DocBook/media/v4l/compat.xml
2014-10-09 14:00:54 -03:00
nibble.max 8db3e5df4b [media] rc: add dvbsky rc keymap macro
This RC will be used by DVBSky driver, added on the next patch.

Signed-off-by: Nibble Max <nibble.max@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-23 16:13:49 -03:00
Laurent Pinchart 072f1a489e [media] v4l: videobuf2: Fix typos in comments
The buffer flags are incorrectly referred to as V4L2_BUF_FLAGS_* instead
of V4L2_BUF_FLAG_* in comments. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-23 16:13:40 -03:00
Hans Verkuil 58d75f4b1c [media] vb2: fix VBI/poll regression
The recent conversion of saa7134 to vb2 unconvered a poll() bug that
broke the teletext applications alevt and mtt. These applications
expect that calling poll() without having called VIDIOC_STREAMON will
cause poll() to return POLLERR. That did not happen in vb2.

This patch fixes that behavior. It also fixes what should happen when
poll() is called when STREAMON is called but no buffers have been
queued. In that case poll() will also return POLLERR, but only for
capture queues since output queues will always return POLLOUT
anyway in that situation.

This brings the vb2 behavior in line with the old videobuf behavior.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:57:30 -03:00
Hans Verkuil 44e8e69d46 [media] videobuf2-core.h: fix comment
The comment for start_streaming that tells the developer with which vb2 state
buffers should be returned to vb2 gave the wrong state. Very confusing.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:45:23 -03:00
Prabhakar Lad ead130335f [media] media: videobuf2-core.h: add a helper to get status of start_streaming()
this patch adds a helper to get the status if start_streaming()
was called successfully.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21 20:15:39 -03:00
Mauro Carvalho Chehab 8dece35daf [media] dm644x_ccdc: use unsigned long for fpc_table_addr
The fpc_table_addr is used as an unsigned integer that stores
an address. At the Kernel, the proper type for such integers
is unsigned long.

This generates lots of warnings when compiling on 64 bits.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-26 18:52:03 -03:00
Hans Verkuil f035eb4e97 [media] videobuf2: fix lockdep warning
The following lockdep warning has been there ever since commit a517cca6b2
one year ago:

[  403.117947] ======================================================
[  403.117949] [ INFO: possible circular locking dependency detected ]
[  403.117953] 3.16.0-rc6-test-media #961 Not tainted
[  403.117954] -------------------------------------------------------
[  403.117956] v4l2-ctl/15377 is trying to acquire lock:
[  403.117959]  (&dev->mutex#3){+.+.+.}, at: [<ffffffffa005a6c3>] vb2_fop_mmap+0x33/0x90 [videobuf2_core]
[  403.117974]
[  403.117974] but task is already holding lock:
[  403.117976]  (&mm->mmap_sem){++++++}, at: [<ffffffff8118291f>] vm_mmap_pgoff+0x6f/0xc0
[  403.117987]
[  403.117987] which lock already depends on the new lock.
[  403.117987]
[  403.117990]
[  403.117990] the existing dependency chain (in reverse order) is:
[  403.117992]
[  403.117992] -> #1 (&mm->mmap_sem){++++++}:
[  403.117997]        [<ffffffff810d733c>] validate_chain.isra.39+0x5fc/0x9a0
[  403.118006]        [<ffffffff810d8bc3>] __lock_acquire+0x4d3/0xd30
[  403.118010]        [<ffffffff810d9da7>] lock_acquire+0xa7/0x160
[  403.118014]        [<ffffffff8118c9ec>] might_fault+0x7c/0xb0
[  403.118018]        [<ffffffffa0028a25>] video_usercopy+0x425/0x610 [videodev]
[  403.118028]        [<ffffffffa0028c25>] video_ioctl2+0x15/0x20 [videodev]
[  403.118034]        [<ffffffffa0022764>] v4l2_ioctl+0x184/0x1a0 [videodev]
[  403.118040]        [<ffffffff811d77d0>] do_vfs_ioctl+0x2f0/0x4f0
[  403.118307]        [<ffffffff811d7a51>] SyS_ioctl+0x81/0xa0
[  403.118311]        [<ffffffff8199dc69>] system_call_fastpath+0x16/0x1b
[  403.118319]
[  403.118319] -> #0 (&dev->mutex#3){+.+.+.}:
[  403.118324]        [<ffffffff810d6a96>] check_prevs_add+0x746/0x9f0
[  403.118329]        [<ffffffff810d733c>] validate_chain.isra.39+0x5fc/0x9a0
[  403.118333]        [<ffffffff810d8bc3>] __lock_acquire+0x4d3/0xd30
[  403.118336]        [<ffffffff810d9da7>] lock_acquire+0xa7/0x160
[  403.118340]        [<ffffffff81999664>] mutex_lock_interruptible_nested+0x64/0x640
[  403.118344]        [<ffffffffa005a6c3>] vb2_fop_mmap+0x33/0x90 [videobuf2_core]
[  403.118349]        [<ffffffffa0022122>] v4l2_mmap+0x62/0xa0 [videodev]
[  403.118354]        [<ffffffff81197270>] mmap_region+0x3d0/0x5d0
[  403.118359]        [<ffffffff8119778d>] do_mmap_pgoff+0x31d/0x400
[  403.118363]        [<ffffffff81182940>] vm_mmap_pgoff+0x90/0xc0
[  403.118366]        [<ffffffff81195cef>] SyS_mmap_pgoff+0x1df/0x2a0
[  403.118369]        [<ffffffff810085c2>] SyS_mmap+0x22/0x30
[  403.118376]        [<ffffffff8199dc69>] system_call_fastpath+0x16/0x1b
[  403.118381]
[  403.118381] other info that might help us debug this:
[  403.118381]
[  403.118383]  Possible unsafe locking scenario:
[  403.118383]
[  403.118385]        CPU0                    CPU1
[  403.118387]        ----                    ----
[  403.118388]   lock(&mm->mmap_sem);
[  403.118391]                                lock(&dev->mutex#3);
[  403.118394]                                lock(&mm->mmap_sem);
[  403.118397]   lock(&dev->mutex#3);
[  403.118400]
[  403.118400]  *** DEADLOCK ***
[  403.118400]
[  403.118403] 1 lock held by v4l2-ctl/15377:
[  403.118405]  #0:  (&mm->mmap_sem){++++++}, at: [<ffffffff8118291f>] vm_mmap_pgoff+0x6f/0xc0
[  403.118411]
[  403.118411] stack backtrace:
[  403.118415] CPU: 0 PID: 15377 Comm: v4l2-ctl Not tainted 3.16.0-rc6-test-media #961
[  403.118418] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013
[  403.118420]  ffffffff82a6c9d0 ffff8800af37fb00 ffffffff819916a2 ffffffff82a6c9d0
[  403.118425]  ffff8800af37fb40 ffffffff810d5715 ffff8802308e4200 0000000000000000
[  403.118429]  ffff8802308e4a48 ffff8802308e4a48 ffff8802308e4200 0000000000000001
[  403.118433] Call Trace:
[  403.118441]  [<ffffffff819916a2>] dump_stack+0x4e/0x7a
[  403.118445]  [<ffffffff810d5715>] print_circular_bug+0x1d5/0x2a0
[  403.118449]  [<ffffffff810d6a96>] check_prevs_add+0x746/0x9f0
[  403.118455]  [<ffffffff8119c172>] ? find_vmap_area+0x42/0x70
[  403.118459]  [<ffffffff810d733c>] validate_chain.isra.39+0x5fc/0x9a0
[  403.118463]  [<ffffffff810d8bc3>] __lock_acquire+0x4d3/0xd30
[  403.118468]  [<ffffffff810d9da7>] lock_acquire+0xa7/0x160
[  403.118472]  [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core]
[  403.118476]  [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core]
[  403.118480]  [<ffffffff81999664>] mutex_lock_interruptible_nested+0x64/0x640
[  403.118484]  [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core]
[  403.118488]  [<ffffffffa005a6c3>] ? vb2_fop_mmap+0x33/0x90 [videobuf2_core]
[  403.118493]  [<ffffffff810d8055>] ? mark_held_locks+0x75/0xa0
[  403.118497]  [<ffffffffa005a6c3>] vb2_fop_mmap+0x33/0x90 [videobuf2_core]
[  403.118502]  [<ffffffffa0022122>] v4l2_mmap+0x62/0xa0 [videodev]
[  403.118506]  [<ffffffff81197270>] mmap_region+0x3d0/0x5d0
[  403.118510]  [<ffffffff8119778d>] do_mmap_pgoff+0x31d/0x400
[  403.118513]  [<ffffffff81182940>] vm_mmap_pgoff+0x90/0xc0
[  403.118517]  [<ffffffff81195cef>] SyS_mmap_pgoff+0x1df/0x2a0
[  403.118521]  [<ffffffff810085c2>] SyS_mmap+0x22/0x30
[  403.118525]  [<ffffffff8199dc69>] system_call_fastpath+0x16/0x1b

The reason is that vb2_fop_mmap and vb2_fop_get_unmapped_area take the core lock
while they are called with the mmap_sem semaphore held. But elsewhere in the code
the core lock is taken first but calls to copy_to/from_user() can take the mmap_sem
semaphore as well, potentially causing a classical A-B/B-A deadlock.

However, the mmap/get_unmapped_area calls really shouldn't take the core lock
at all. So what would happen if they don't take the core lock anymore?

There are two situations that need to be taken into account: calling mmap while
new buffers are being added and calling mmap while buffers are being deleted.

The first case works almost fine without a lock: in all cases mmap relies on
correctly filled-in q->num_buffers/q->num_planes values and those are only
updated by reqbufs and create_buffers *after* any new buffers have been
initialized completely. Except in one case: if an error occurred while allocating
the buffers it will increase num_buffers and rely on __vb2_queue_free to
decrease it again. So there is a short period where the buffer information
may be wrong.

The second case definitely does pose a problem: buffers may be in the process
of being deleted, without the internal structure being updated.

In order to fix this a new mutex is added to vb2_queue that is taken when
buffers are allocated or deleted, and in vb2_mmap. That way vb2_mmap won't
get stale buffer data. Note that this is a problem only for MEMORY_MMAP, so
even though __qbuf_userptr and __qbuf_dmabuf also mess around with buffers
(mem_priv in particular), this doesn't clash with vb2_mmap or
vb2_get_unmapped_area since those are MMAP specific.

As an additional bonus the hack in __buf_prepare, the USERPTR case, can be
removed as well since mmap() no longer takes the core lock.

All in all a much cleaner solution.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21 15:25:31 -05:00
Laurent Pinchart 9a36d8ed33 [media] omap3isp: ccdc: Add basic support for interlaced video
When the CCDC input is interlaced enable the alternate field order on
the CCDC output video node. The field signal polarity is specified
through platform data.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Enrico Butera <ebutera@users.sourceforge.net>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21 15:25:14 -05:00
Josh Wu 3900623bfa [media] media: atmel-isi: add v4l2 async probe support
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-30 19:35:06 -03:00
Marcel J.E. Mol 1dee9b59d6 [media] rc: Add support for decoding XMP protocol
This protocol is found on Dreambox remotes

[m.chehab@samsung.com: CodingStyle fixes and conflict fix]
Signed-off-by: Marcel Mol <marcel@mesa.nl>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 19:38:04 -03:00
Sonic Zhang 0a6824bc10 [media] v4l2: blackfin: select proper pinctrl state in ppi_set_params if CONFIG_PINCTRL is enabled
Multiple pinctrl states are defined for 8, 16 and 24 data pin groups in PPI peripheral.
The driver should select correct group before set up further PPI parameters.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 17:15:16 -03:00
Sonic Zhang f7d0e6d67f [media] media: blackfin: ppi: Pass device pointer to request peripheral pins
if the pinctrl driver is enabled.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 17:12:30 -03:00
James Harper 7b4eeed174 [media] vmalloc_sg: make sure all pages in vmalloc area are really DMA-ready
Patch originally written by Konrad. Rebased on current linux media tree.

Under Xen, vmalloc_32() isn't guaranteed to return pages which are really
under 4G in machine physical addresses (only in virtual pseudo-physical
addresses).  To work around this, implement a vmalloc variant which
allocates each page with dma_alloc_coherent() to guarantee that each
page is suitable for the device in question.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: James Harper <james.harper@ejbdigital.com.au>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26 11:33:15 -03:00
Mauro Carvalho Chehab 7cec72ce00 [media] rc-core: don't use dynamic_pr_debug for IR_dprintk()
The hole point of IR_dprintk() is that, once a level is
given at debug parameter, all enabled IR parsers will show their
debug messages.

While converting it to dynamic_printk might be a good idea,
right now it just makes very hard to debug the drivers, as
one needs to both pass debug=1 or debug=2 to rc-core and
to use the dynamic printk to enable all the desired lines.

That doesn't make sense!

So, revert to the old way, as a single line is changed,
and the debug parameter will now work as expected.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25 23:40:06 -03:00
Hans Verkuil 811c508104 [media] v4l2-ctrls: add new RDS TX controls
The si4713 supports several RDS features not yet implemented in the driver.

This patch adds the missing RDS functionality to the list of RDS controls.

The ALT_FREQS control is a compound control containing an array of up
to 25 (the maximum according to the RDS standard) frequencies. To support
that the V4L2_CTRL_TYPE_U32 was added.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25 19:26:14 -03:00
Hans Verkuil ccf58cb4ea [media] vb2: fix videobuf2-core.h comments
A lot of work was done in vb2 to regulate how drivers and the vb2 core handle
buffer ownership, but inexplicably the videobuf2-core.h comments were never
updated. Do so now. The same was true for the replacement of the -ENOBUFS
mechanism by the min_buffers_needed field.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25 19:19:35 -03:00
Hans Verkuil 5d0360a4f0 [media] v4l2-ctrls: add support for setting string controls
Rather than always having to use a v4l2_ext_control struct to set
a control value from within a driver, switch to just setting the
new value. This is faster and it makes it possible to set more
complex types such as a string control as is added by this
patch.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25 19:18:51 -03:00
David Härdeman 9d2f1d3cde [media] rc-core: rename dev->scanmask to dev->scancode_mask
We already have dev->scancode_filter and dev->scancode_wakeup_filter
so rename dev->scanmask to dev->scancode_mask for consistency.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25 19:10:43 -03:00
David Härdeman c5540fbb9d [media] rc-core: remove protocol arrays
The basic API of rc-core used to be:

	dev = rc_allocate_device();
	dev->x = a;
	dev->y = b;
	dev->z = c;
	rc_register_device();

which is a pretty common pattern in the kernel, after the introduction of
protocol arrays the API looks something like:

	dev = rc_allocate_device();
	dev->x = a;
	rc_set_allowed_protocols(dev, RC_BIT_X);
	dev->z = c;
	rc_register_device();

There's no real need for the protocols to be an array, so change it
back to be consistent (and in preparation for the following patches).

[m.chehab@samsung.com: added missing changes at some files]
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-25 19:10:43 -03:00
David Härdeman 120703f9eb [media] rc-core: document the protocol type
Right now the protocol information is not preserved, rc-core gets handed a
scancode but has no idea which protocol it corresponds to.

This patch (which required reading through the source/keymap for all drivers,
not fun) makes the protocol information explicit which is important
documentation and makes it easier to e.g. support multiple protocols with one
decoder (think rc5 and rc-streamzap). The information isn't used yet so there
should be no functional changes.

[m.chehab@samsung.com: rebased, added cxusb and removed bad whitespacing]
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-23 21:50:48 -03:00
David Härdeman 4dd9bb91bb [media] rc-core: improve ir-kbd-i2c get_key functions
The arguments used for ir-kbd-i2c's get_key() functions are not
really suited for rc-core and the ir_raw/ir_key distinction is
just confusing.

Convert all of them to return a protocol/scancode/toggle triple instead.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-23 20:05:56 -03:00
Michael Olbrich 1190a419e0 [media] v4l2-mem2mem: export v4l2_m2m_try_schedule
Some drivers might allow to decode remaining frames from an internal ringbuffer
after a decoder stop command. Allow those to call v4l2_m2m_try_schedule
directly.

Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-22 12:06:50 -03:00
Sakari Ailus 0c4348ada0 [media] v4l: ctrls: Unlocked variants of v4l2_ctrl_s_ctrl{,_int64}()
Implement unlocked variants of v4l2_ctrl_s_ctrl() and
v4l2_ctrl_s_ctrl_int64(). As drivers need to set controls as they access
driver internal state elsewhere than in the control framework unlocked
variants of these functions become handy.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-21 20:10:48 -03:00