Commit Graph

48 Commits

Author SHA1 Message Date
Matthieu CASTET cd409c6128 mtdoops: don't erase flash at each boot
The current version on mtdoops erase first block of mtdoops partition at each
boot if there is no oops stored in flash. This can wear the flash.

When mtdoops start, find_next_position is called to find the next free entry in
the circular buffer. But if the flash is erased, find_next_position don't find
anything (maxcount == 0xffffffff) and start with the first entry after erasing it.

The scanning that is done in find_next_position already track free/used entries.
So if at the end of the scanning we don't find anything, we can start at the
first entry and erased the entry only if it is marked as used.
Most of this is implemented in mtdoops_inc_counter, so to avoid duplicating
code, if we don't find anything we set position to -1. mtdoops_inc_counter with
increment it, erase the entry if needed and start as before with nextpage = 0
and nextcount = 1).

Also during the scan phase, we use the MTDOOPS_KERNMSG_MAGIC to detect corruped
entries.

Signed-off-by: Matthieu Castet <matthieu.castet@parrot@com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15 15:37:51 +02:00
David Woodhouse ffe3150125 UAPI Disintegration 2012-10-09
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUHPmWhOxKuMESys7AQLCZRAAsZAuAK0MxZ4iuq/+fmy7Uxb1jrzLOYSb
 3UgbTgXAjR0WAUHNegVZLX1Xc+12KxvMCj/8sO62Ai+wtgHeDAuUl2T0FbSZjlGK
 qqx/qQqTFHUfJRbm3Lu9iarZ2K49v1kTDk4C+nC8J9mEEW4WFlVPD10n90j+4hxr
 ZCEYril7qOQQV65oor3BT2V64+X1WDHriTLugH1o8RziRF9jh6Z2hgZAWnThcGxu
 lPsmXF2e7jDqGcM3gWtxZWu/yTBPxw549R+JUg4aVKho9WI5ClyjNAKnE7wtd3iW
 HyrylRH+ch2oeYFa5+xoyopRARUUPmujKaHU+ZI1o++eNzuw5JYiwuMlZBLyUc9I
 foWMSUw31U7695exyf66HiH7GEKI1PVpgJVNu41eJvl0iWSWCpKCB6Gs8Sw4xnp2
 auUCYSniXHNTFhFktjNdIUAn0+1X/b/SEfb/id4GvLp1K98QGOfe8dMCC8hEnXiF
 4iIViM8Sv1GB1us5huSjbMeRPbZ3x/loqEpApfgcaqcyrUR29FTE/lFQ4fj9xviL
 JjckPLMMZb4Ho5wrkCi5NtXJ16mx1qKzbBGDdqzmqaNdN+08rNF//kA9m9hCwgD8
 XfAV286DKDC0SllZIG+Uz7YLnSZjNAUhjvWN3ipV+SdT5DGybL3uSW5tYiSAzI2E
 3cayGTWINMg=
 =U9Qq
 -----END PGP SIGNATURE-----

Merge tag 'disintegrate-mtd-20121009' of git://git.infradead.org/users/dhowells/linux-headers

UAPI Disintegration 2012-10-09

Conflicts:
	MAINTAINERS
	arch/arm/configs/bcmring_defconfig
	arch/arm/mach-imx/clk-imx51-imx53.c
	drivers/mtd/nand/Kconfig
	drivers/mtd/nand/bcm_umi_nand.c
	drivers/mtd/nand/nand_bcm_umi.h
	drivers/mtd/nand/orion_nand.c
2012-10-09 15:04:25 +01:00
David Woodhouse 2361f738b6 Linux 3.6-rc2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJQLWtvAAoJEHm+PkMAQRiG/DYH+wd0FqfEuYkYk4KPyAPuhKpX
 zX7HYfLvyJE/ZYIdrhjq1E6Xm2KNr7gtX7/Rdzi2W38M9sjbYzwG1UGIw51qnxWy
 yZJH9BGkfyQgQPeuDGohfB6DkDy2JWr2eqMDvakjOwgBsIzji0PQD/f3UvndhtUa
 c+tTj/kjavHE1Yr2Wy6OnRZz3Uc0hIMn/Q0JqtbCs3LUgEV1KA4OEAe56XNz4Ku4
 WE+FFaGFPvtriQsQON+ohPS5IC8jzQGK/0vbrJ4lWjFnZy4gvZXnborTOwD0WSQG
 fbsNuxp1AaM2/pqfMwXm1w0ADvwOITHNiwwXf9id6DoK81QwTFpUdvKpn6yB6gQ=
 =rurr
 -----END PGP SIGNATURE-----

Merge tag 'v3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

Having missed the merge window, update to 3.6-rc2 to avoid conflicts with
new patches.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-08-22 12:55:43 +01:00
Tejun Heo 43829731dd workqueue: deprecate flush[_delayed]_work_sync()
flush[_delayed]_work_sync() are now spurious.  Mark them deprecated
and convert all users to flush[_delayed]_work().

If you're cc'd and wondering what's going on: Now all workqueues are
non-reentrant and the regular flushes guarantee that the work item is
not pending or running on any CPU on return, so there's no reason to
use the sync flushes at all and they're going away.

This patch doesn't make any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mattia Dongili <malattia@linux.it>
Cc: Kent Yoder <key@linux.vnet.ibm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-wireless@vger.kernel.org
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Avi Kivity <avi@redhat.com>
2012-08-20 14:51:24 -07:00
Brian Norris 9cb93fbb5e mtd: mtdoops: refactor loop
We can clean up the loop logic a bit, here. This refactoring was enabled
in part by:

 Commit bb4a09866 [mtdoops: clean-up new MTD API usage]

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-07-06 18:17:02 +01:00
Kay Sievers e2ae715d66 kmsg - kmsg_dump() use iterator to receive log buffer content
Provide an iterator to receive the log buffer content, and convert all
kmsg_dump() users to it.

The structured data in the kmsg buffer now contains binary data, which
should no longer be copied verbatim to the kmsg_dump() users.

The iterator should provide reliable access to the buffer data, and also
supports proper log line-aware chunking of data while iterating.

Signed-off-by: Kay Sievers <kay@vrfy.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Reported-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Tested-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 14:53:59 -07:00
Artem Bityutskiy bb4a09866f mtdoops: clean-up new MTD API usage
Let's remove useless 'mtd_can_have_bb()' function invocations.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27 00:23:53 +01:00
WANG Cong a3dd332305 kexec: remove KMSG_DUMP_KEXEC
KMSG_DUMP_KEXEC is useless because we already save kernel messages inside
/proc/vmcore, and it is unsafe to allow modules to do other stuffs in a
crash dump scenario.

[akpm@linux-foundation.org: fix powerpc build]
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:11 -08:00
Artem Bityutskiy 800ffd3496 mtd: do not use mtd->block_markbad directly
Instead, use the new 'mtd_can_have_bb()', or just rely on 'mtd_block_markbad()'
return code, which will be -EOPNOTSUPP if bad blocks are not supported.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09 18:26:26 +00:00
Artem Bityutskiy 8f461a7302 mtd: introduce mtd_can_have_bb helper
This patch introduces new 'mtd_can_have_bb()' helper function which checks
whether the flash can have bad eraseblocks. Then it changes all the
direct 'mtd->block_isbad' use cases with 'mtd_can_have_bb()'.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09 18:26:24 +00:00
Artem Bityutskiy 016c1291ce mtd: mtdoops: do not use mtd->panic_write directly
Instead of checking if 'mtd->panic_write' is defined, call 'mtd_panic_write()'
and check the error code - '-EOPNOTSUPP' will be returned if the function is
not defined.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09 18:26:13 +00:00
Artem Bityutskiy 5942ddbc50 mtd: introduce mtd_block_markbad interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09 18:25:48 +00:00
Artem Bityutskiy 7086c19d07 mtd: introduce mtd_block_isbad interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09 18:25:47 +00:00
Artem Bityutskiy 7ae79d7ff1 mtd: introduce mtd_panic_write interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09 18:25:22 +00:00
Artem Bityutskiy eda95cbf75 mtd: introduce mtd_write interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09 18:25:20 +00:00
Artem Bityutskiy 329ad399a9 mtd: introduce mtd_read interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09 18:25:19 +00:00
Artem Bityutskiy 7e1f0dc055 mtd: introduce mtd_erase interface
This patch is part of a patch-set which changes the MTD interface
from 'mtd->func()' form to 'mtd_func()' form. We need this because
we want to add common code to to all drivers in the mtd core level,
which is impossible with the current interface when MTD clients
call driver functions like 'read()' or 'write()' directly.

At this point we just introduce a new inline wrapper function, but
later some of them are expected to gain more code. E.g., the input
parameters check should be moved to the wrappers rather than be
duplicated at many drivers.

This particular patch introduced the 'mtd_erase()' interface. The
following patches add all the other interfaces one by one.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09 18:25:11 +00:00
Roman Tereshonkov 556f063580 mtdoops: fix the oops_page_used array size
The array of unsigned long pointed by oops_page_used is allocated
by vmalloc which requires the size to be in bytes.

BITS_PER_LONG is equal to 32.
If we want to allocate memory for 32 pages with one bit per page then
32 / BITS_PER_LONG  is equal to 1 byte that is 8 bits.
To fix it we need to multiply the result by sizeof(unsigned long) equal to 4.

Cc: stable@kernel.org
Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09 18:18:11 +00:00
Roman Tereshonkov 3538c56329 mtd: mtdoops: skip reading initially bad blocks
Use block_isbad to check and skip the bad blocks reading.
This will allow to get rid of the read errors if bad blocks
are present initially.

Cc: stable@kernel.org
Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09 18:12:47 +00:00
Brian Norris d57f40544a mtd: utilize `mtd_is_*()' functions
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21 09:19:06 +03:00
Linus Torvalds ab2020f2f1 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (59 commits)
  mtd: mtdpart: disallow reading OOB past the end of the partition
  mtd: pxa3xx_nand: NULL dereference in pxa3xx_nand_probe
  UBI: use mtd->writebufsize to set minimal I/O unit size
  mtd: initialize writebufsize in the MTD object of a partition
  mtd: onenand: add mtd->writebufsize initialization
  mtd: nand: add mtd->writebufsize initialization
  mtd: cfi: add writebufsize initialization
  mtd: add writebufsize field to mtd_info struct
  mtd: OneNAND: OMAP2/3: prevent regulator sleeping while OneNAND is in use
  mtd: OneNAND: add enable / disable methods to onenand_chip
  mtd: m25p80: Fix JEDEC ID for AT26DF321
  mtd: txx9ndfmc: limit transfer bytes to 512 (ECC provides 6 bytes max)
  mtd: cfi_cmdset_0002: add support for Samsung K8D3x16UxC NOR chips
  mtd: cfi_cmdset_0002: add support for Samsung K8D6x16UxM NOR chips
  mtd: nand: ams-delta: drop omap_read/write, use ioremap
  mtd: m25p80: add debugging trace in sst_write
  mtd: nand: ams-delta: select for built-in by default
  mtd: OneNAND: lighten scary initial bad block messages
  mtd: OneNAND: OMAP2/3: add support for command line partitioning
  mtd: nand: rearrange ONFI revision checking, add ONFI 2.3
  ...

Fix up trivial conflict in drivers/mtd/Kconfig as per DavidW.
2011-01-17 11:15:30 -08:00
Seiji Aguchi fc2d557c74 kmsg_dump: constrain mtdoops and ramoops to perform their actions only for KMSG_DUMP_PANIC
This series aims to develop logging facility for enterprise use.

It is important to save kernel messages reliably on enterprise system
because they are helpful for diagnosing system.

This series add kmsg_dump() to the paths loosing kernel messages.  The use
case is the following.

[Use case of reboot/poweroff/halt/emergency_restart]

 My company has often experienced the followings in our support service.
 - Customer's system suddenly reboots.
 - Customers ask us to investigate the reason of the reboot.

We recognize the fact itself because boot messages remain in
/var/log/messages.  However, we can't investigate the reason why the
system rebooted, because the last messages don't remain.  And off course
we can't explain the reason.

We can solve above problem with this patch as follows.

 Case1: reboot with command
   - We can see "Restarting system with command:" or ""Restarting system.".

 Case2: halt with command
   - We can see "System halted.".

 Case3: poweroff with command
   - We can see " Power down.".

 Case4: emergency_restart with sysrq.
   - We can see "Sysrq:" outputted in __handle_sysrq().

 Case5: emergency_restart with softdog.
   - We can see "Initiating system reboot" in watchdog_fire().

So, we can distinguish the reason of reboot, poweroff, halt and emergency_restart.

If customer executed reboot command, you may think the customer should
know the fact.  However, they often claim they don't execute the command
when they rebooted system by mistake.

No message remains on the current Linux kernel, so we can't show the proof
to the customer.  This patch improves this situation.

This patch:

Alters mtdoops and ramoops to perform their actions only for
KMSG_DUMP_PANIC, KMSG_DUMP_OOPS and KMSG_DUMP_KEXEC because they would
like to log crashes only.

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Reviewed-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:07 -08:00
Tejun Heo 75c52a4963 mtd: don't use flush_scheduled_work()
flush_scheduled_work() is deprecated and scheduled to be removed.
Directly flush cxt->work_{erase|write} on removal instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06 15:17:08 +00:00
David Woodhouse a1452a3771 mtd: Update copyright notices
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2010-08-08 20:58:20 +01:00
Ben Hutchings 24c1549677 mtd: Remove unnecessary comparisons with MAX_MTD_DEVICES
MAX_MTD_DEVICES is about to be removed.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:39:09 +00:00
KOSAKI Motohiro 0f4bd46ec2 kmsg_dump: Dump on crash_kexec as well
crash_kexec gets called before kmsg_dump(KMSG_DUMP_OOPS) if
panic_on_oops is set, so the kernel log buffer is not stored
for this case.

This patch adds a KMSG_DUMP_KEXEC dump type which gets called
when crash_kexec() is invoked. To avoid getting double dumps,
the old KMSG_DUMP_PANIC is moved below crash_kexec(). The
mtdoops driver is modified to handle KMSG_DUMP_KEXEC in the
same way as a panic.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-12-31 19:45:04 +00:00
Simon Kagstrom 2e386e4bac mtd: mtdoops: refactor as a kmsg_dumper
The last messages which happens before a crash might contain interesting
information about the crash. This patch reworks mtdoops using the
kmsg_dumper support instead of a console, which simplifies the code and
also includes the messages before the oops started.

On oops callbacks, the MTD device write is scheduled in a work queue (to
be able to use the regular mtd->write call), while panics call
mtd->panic_write directly. Thus, if panic_on_oops is set, the oops will
be written out during the panic.

A parameter to specify which mtd device to use (number or name), as well
as a flag, writable at runtime, to toggle wheter to dump oopses or only
panics (since oopses can often be handled by regular syslog).

The patch was massaged and amended by Artem.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Reviewed-by: Anders Grafstrom <anders.grafstrom@netinsight.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-30 12:02:07 +00:00
Simon Kagstrom 9507b0c838 mtd: mtdoops: make record size configurable
The main justification for this is to allow catching long messages
during a panic, where the top part might otherwise be lost since moving
to the next block can require a flash erase.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Reviewed-by: Anders Grafstrom <anders.grafstrom@netinsight.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-30 12:02:05 +00:00
Simon Kagstrom 1114e3d00f mtd: mtdoops: limit the maximum mtd partition size
Make the maximum mtdoops partition size to be 8MiB. Indeed, it does
not make sense to use anything larger than that anyway. This limit
makes it possible to catch stupid mistakes where the user gives e.g.,
a rootfs partition to mtdoops (which will happily erase it).

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-30 12:02:02 +00:00
Simon Kagstrom be95745f01 mtd: mtdoops: keep track of used/unused pages in an array
This patch makes mtdoops keep track of used/unused pages in an array
instead of scanning the flash after a write. The advantage with this
approach is that it avoids calling mtd->read on a panic, which is not
possible for all mtd drivers.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Reviewed-by: Anders Grafstrom <anders.grafstrom@netinsight.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-30 12:01:59 +00:00
Artem Bityutskiy a15b124fc4 mtd: mtdoops: several minor cleanups
While looking into the mtdoops module, I've spotted several minor
imperfections. This patch addresses them. Namely:

1. Remove several trailing white-spaces and tabs
2. Check 'vmalloc()' return code straight away, not several lines
   below in the 'mtdoops_console_init()' function.
3. Clean up printks - make them more consistent and use the same
   code formatting style for them.
4. Remove silly style of putting brackets around everything in
   "if" operators.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: Simon Kagstrom <simon.kagstrom@netinsight.net>

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-30 12:01:56 +00:00
Adrian Hunter 48ec00ac89 [MTD] mtdoops: fix a bit of spin lock usage
- do not leave spin lock locked
- initialise spin lock

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-20 18:39:25 +00:00
Adrian Hunter e2a0f25b4f [MTD] mtdoops: allow MTD selection by name
MTD's have both an index number and a name.  Formerly,
the MTD selected for mtdoops was done only by index
number.  With this patch, a name can be used instead.

For example, the kernel command line:

	console=ttyMTD5

selects MTD 5 for mtdoops.  But now this is also possible:

	console=ttyMTD,log

which selects the MTD named "log" for mtdoops.

This has the advantage that partitions can be added or
removed that would affect the MTD index number but not the
name, without having to then change the kernel command line.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-20 18:38:58 +00:00
Adrian Hunter 69423d99fc [MTD] update internal API to support 64-bit device size
MTD internal API presently uses 32-bit values to represent
device size.  This patch updates them to 64-bits but leaves
the external API unchanged.  Extending the external API
is a separate issue for several reasons.  First, no one
needs it at the moment.  Secondly, whether the implementation
is done with IOCTLs, sysfs or both is still debated.  Thirdly
external API changes require the internal API to be accepted
first.

Note that although the MTD API will be able to support 64-bit
device sizes, existing drivers do not and are not required
to do so, although NAND base has been updated.

In general, changing from 32-bit to 64-bit values cause little
or no changes to the majority of the code with the following
exceptions:
    	- printk message formats
    	- division and modulus of 64-bit values
    	- NAND base support
	- 32-bit local variables used by mtdpart and mtdconcat
	- naughtily assuming one structure maps to another
	in MEMERASE ioctl

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-10 13:37:21 +00:00
Richard Purdie 43b5693d40 [MTD] mtdoops: Fix a bug where block may not be erased
This makes the driver erase a block when it doesn't find any
existing saved log messages which is safer than assuming the
flash was already erased.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-18 11:51:48 +01:00
Richard Purdie f0482ee366 [MTD] mtdoops: Add a magic number to logged kernel oops
Add a magic number to logged kernel oops messages so that they
can be more accurately detected rather than just having to rely
on the sequence number. This also allows easier detection of
saved crashes by userspace.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-18 11:51:27 +01:00
Richard Purdie ecd5b31023 [MTD] mtdoops: Fix an off by one error
Fix an off by one error in the mtdoops driver

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-18 11:51:13 +01:00
Adrian Bunk 7903cbabcb [MTD] mtdoops.c: make struct oops_cxt static again
struct oops_cxt needlessly became global.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 12:35:34 +01:00
David Woodhouse f9f7dd2223 [MTD] Fix mtdoops.c compilation
drivers/mtd/mtdoops.c: In function ‘mtdoops_console_sync’:
drivers/mtd/mtdoops.c:329: error: implicit declaration of function ‘in_interrupt’

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-07 10:50:57 +00:00
Richard Purdie 621e4f8e9b [MTD] mtdoops: Use the panic_write function when present
When the MTD provides a panic_write function, use it.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-07 10:31:04 +00:00
Richard Purdie 79dcd8e9e1 [MTD] mtdoops: Various minor cleanups
Various minor cleaups to mtdoops:
  * Don't support the mtd->erasesize < OOPS_PAGE_SIZE case
  * Tweak printks and make the device mtdoops connects to more visible
  * CON_PRINTBUFFER flag is uneeded

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:19:24 +11:00
Richard Purdie 47c152b88c [MTD] mtdoops: Ensure sequential write to the buffer
Add a spinlock to ensure writes to the mtdoops buffer memory are
sequential and don't race.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:18:58 +11:00
Richard Purdie 6ce0a856c1 [MTD] mtdoops: Perform write operations in a workqueue
Writing to the flash needs to be done in a workqueue. The console
write functions may be called in any context which can lead to
lockups otherwise.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:14:41 +11:00
Richard Purdie 2986bd2a33 [MTD] mtdoops: Add further error return code checking
Add further error return code checks to the mtdoops driver.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:14:35 +11:00
Peter Korsgaard 235d6200ea [MTD] mtdoops cleanup
Use memcpy instead of open coding a copy loop.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03 14:00:16 +00:00
Andrew Morton 68d09b1b67 [MTD] mtdoops printk warning fixes
drivers/mtd/mtdoops.c: In function 'mtdoops_inc_counter':
drivers/mtd/mtdoops.c:109: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
drivers/mtd/mtdoops.c: In function 'mtdoops_console_sync':
drivers/mtd/mtdoops.c:277: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'

someone buy Dave an x86_64 box.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-22 12:43:13 +01:00
Richard Purdie 8691a729a2 [MTD] Add sync/unblank function to mtdoops
mtdoops wasn't ensuring data was flushed to flash in crash situations
after recent changes in mainline kernels as tracking the
oops_in_progress variable was no longer enough. We can use the "unblank"
console call as a sync call to tell us to write out the buffer though.

Therefore add a sync function to mtdoops and call this when console
unblank events occur.

Signed-off-by: Richard Purdie <rpurdie@openedhand.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-11 14:57:17 +01:00
Richard Purdie 4b23aff083 [MTD] oops and panic message logging to MTD device
Kernel oops and panic messages are invaluable when debugging crashes.
These messages often don't make it to flash based logging methods (say a
syslog on jffs2) due to the overheads involved in writing to flash.

This patch allows you to turn an MTD partition into a circular log
buffer where kernel oops and panic messages are written to. The messages
are obtained by registering a console driver and checking
oops_in_progress. Erases are performed in advance to maximise the
chances of a saving messages.

To activate it, add console=ttyMTDx to the kernel commandline (where x
is the mtd device number to use).

Signed-off-by: Richard Purdie <rpurdie@openedhand.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-06-28 20:18:02 +01:00