Commit Graph

361 Commits

Author SHA1 Message Date
Nishanth Menon f75587b8ca extcon: palmas: Drop stray IRQF_EARLY_RESUME flag
Palmas extcon IRQs are nested threaded and wired to the Palmas
interrupt controller. So, this flag is not required for nested
IRQs anymore, since commit 3c646f2c6a ("genirq: Don't suspend
nested_thread irqs over system suspend") was merged. However, the
fix in commit ae64e42cc2 ("extcon: palmas: Drop IRQF_EARLY_RESUME
flag") missed a stray flag causing the following crash on resume on
BeagleBoard-X15 platform:

[   53.670141] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[..]
[   53.670141] [<c04ae734>] (omap_set_gpio_triggering) from [<c04aeb94>] (omap_gpio_unmask_irq+0xc0/0xc4)
[   53.670141] [<c04aeb94>] (omap_gpio_unmask_irq) from [<c01a0b88>] (irq_enable+0x30/0x44)
[   53.670141] [<c01a0b88>] (irq_enable) from [<c019ebd8>] (__enable_irq+0x54/0x78)
[   53.670141] [<c019ebd8>] (__enable_irq) from [<c01a4e60>] (resume_irqs+0xe8/0x100)
[   53.670141] [<c01a4e60>] (resume_irqs) from [<c0514840>] (syscore_resume+0x94/0x298)
[   53.670141] [<c0514840>] (syscore_resume) from [<c01981cc>] (suspend_devices_and_enter+0x790/0x9e4)
[   53.670141] [<c01981cc>] (suspend_devices_and_enter) from [<c0198a60>] (pm_suspend+0x640/0x75c)
[   53.670141] [<c0198a60>] (pm_suspend) from [<c0196bec>] (state_store+0x64/0xb8)
[   53.670141] [<c0196bec>] (state_store) from [<c0307944>] (kernfs_fop_write+0xc0/0x1bc)
[   53.670141] [<c0307944>] (kernfs_fop_write) from [<c028acb0>] (__vfs_write+0x1c/0xd8)
[   53.670141] [<c028acb0>] (__vfs_write) from [<c028bba0>] (vfs_write+0x90/0x16c)
[   53.670141] [<c028bba0>] (vfs_write) from [<c028c8c0>] (SyS_write+0x44/0x9c)
[   53.670141] [<c028c8c0>] (SyS_write) from [<c0107840>] (ret_fast_syscall+0x0/0x1c)
[..]

Fixes: ae64e42cc2 ("extcon: palmas: Drop IRQF_EARLY_RESUME flag")
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Roger Quadros <rogerq@ti.com>

Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-04-04 08:32:45 +09:00
Grygorii Strashko ae64e42cc2 extcon: palmas: Drop IRQF_EARLY_RESUME flag
Palams extcon IRQs are nested threaded and wired to the Palmas
inerrupt controller. So, this flag is not required for nested irqs
anymore, since commit 3c646f2c6a ("genirq: Don't suspend
nested_thread irqs over system suspend") was merged.

Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Roger Quadros <rogerq@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-02-29 11:07:34 +09:00
Felipe Balbi b7aad8e268 extcon: palmas: Add the support for VBUS detection by using GPIO
This patch support for VBUS detection by using GPIO pin.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
2016-02-05 14:15:31 +09:00
Dan Carpenter c4924e9244 extcon: max77843: Use correct size for reading the interrupt register
The info->status[] array has 3 elements.  We are using size
MAX77843_MUIC_IRQ_NUM (16) instead of MAX77843_MUIC_STATUS_NUM (3) as
intended.

Fixes: 135d9f7d13 ('extcon: max77843: Clear IRQ bits state before request IRQ')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jaewon Kim <jaewon02.kim@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[cw00.choi: Modify the patch title]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-02-05 11:37:26 +09:00
Charles Keepax 03bf1adbd6 extcon: arizona: Use DAPM mutex helper functions
We should be using the helper functions to lock the DAPM mutex not
accessing it directly. There are no ill effects of this as the moment
but it is best practice, and the implementation could be changed in the
future.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-01-25 13:16:53 +09:00
Chanwoo Choi 8b45b6a074 extcon: Add the EXTCON_CHG_USB_SDP to support SDP charing port
This patch adds the new EXTCON_CHG_USB_SDP connector to support SDP (Standard
Downstream Port) USB charging port. The commit 11eecf910b ("extcon: Modify
the id and name of external connector") add the new EXTCON_CHG_USB_SDP
connector which support the both data transfer and usb charging at the same
time.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-01-25 13:16:53 +09:00
Moritz Fischer b51b387020 extcon: gpio: Fix typo in comment
This patch fixes the typo in comment of extcon-gpio.c driver.
- 'interrput' -> 'interrupt'

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-01-25 13:16:53 +09:00
Geliang Tang d58593426e extcon: Use to_i2c_client for both rt8973a and sm5502
Use to_i2c_client() instead of open-coding it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-01-25 13:16:53 +09:00
Sergei Shtylyov 08a0a4f987 extcon: add Maxim MAX3355 driver
Maxim Integrated MAX3355E chip integrates a charge pump and comparators to
enable a system with an integrated USB OTG dual-role transceiver to
function as an USB OTG dual-role device. In addition to sensing/controlling
Vbus, the chip also passes thru the ID signal from the USB OTG connector.
On some Renesas boards, this signal is just fed into the SoC thru a GPIO
pin -- there's no real OTG controller, only host and gadget USB controllers
sharing the same USB bus; however, we'd like to allow host or gadget
drivers to be loaded depending on the cable type, hence the need for the
MAX3355 extcon driver. The Vbus status signals are also wired to GPIOs
(however, we aren't currently interested in them), the OFFVBUS# signal is
controlled by the host controllers, there's also the SHDN# signal wired to
a GPIO, it should be driven high for the normal operation.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
[cw00.choi: Add the GPIOLIB dependency]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-12-21 11:44:00 +09:00
Andrzej Hajda c05c0d544e extcon: max77843: fix handling return value of regmap_irq_get_virq
The function can return negative values, so its result should
be assigned to signed variable.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-12-15 10:02:34 +09:00
Andrzej Hajda cbc46603df extcon: max77693: fix handling return value of regmap_irq_get_virq
The function can return negative values, so its result should
be assigned to signed variable.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-12-15 10:02:23 +09:00
Andrzej Hajda c2957563ad extcon: max14577: fix handling return value of regmap_irq_get_virq
The function can return negative values, so its result should
be assigned to signed variable.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-12-15 10:02:03 +09:00
Charles Keepax bb6da5d954 extcon: arizona: Add device bindings for the micd configurations
Add device bindings to support configuring the jack detection
configurations. Each configuration needs to specify the connection of
the mic det pins, which micbias should be used and the value of the
micd polarity GPIO required to activate that configuration.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-12-15 09:57:36 +09:00
Saurabh Sengar 5f01e6bc33 extcon: rt8973: Add IRQF_ONESHOT to interrupt flags
This patch adds IRQF_ONESHOT if no primary handler is provided for request
threaded irq.

Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-11-27 10:42:00 +09:00
Charles Keepax 7a7ef0f2a4 extcon: arizona: Update naming for micd-timeout DT to include units
Add time units of -ms (milliseconds) to wlf,micd-timeout.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-11-24 09:00:27 +09:00
Charles Keepax 832df9e8ec extcon: arizona: Update naming for second jack detection DT binding
Update the name for the second jack detection pin binding to be a little
less confusing.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-11-24 08:59:11 +09:00
Charles Keepax 35247c136a extcon: arizona: Add device binding for second jack detect pin on GPIO5
Some Arizona devices have the option to use the GPIO5 pin as a second
jack detection pin. This patch adds device bindings to specify to the
driver that it should use this pin. Note that the second jack detection
pin is hard wired in the chip so can only be enabled through the
binding, rather than a pin being specified.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-11-20 10:14:23 +09:00
Charles Keepax 3d7a872fa3 extcon: arizona: Add device binding for jack detect polarity inversion
By default the driver expects the jackdet pin to be pulled low when a
jack is inserted. This patch adds a device binding that allows the user
to specify that the jackdet pin will be pulled high when a jack is
inserted.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-11-20 10:14:23 +09:00
Charles Keepax 99374227cf extcon: arizona: Add device binding for the general purpose switch
The switch is generally used in conjunction with the MICDET clamp to
suppress pops and clicks associated with jack insertion. This patch adds
a binding that allows the user to select the mode of operation for this
switch.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-11-20 10:14:23 +09:00
Charles Keepax 2e87b7a8be extcon: arizona: Add device binding to enable ADC mode micdet
Add a simple boolean binding to turn on and off the use of ADC
microphone detection mode to determine 3/4 pole jack.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-11-20 10:14:23 +09:00
Chanwoo Choi 11eecf910b extcon: Modify the id and name of external connector
This patch modifies the id and name of external connector with the
additional prefix to clarify both attribute and meaning of external
connector as following:
- EXTCON_CHG_* mean the charger connector.
- EXTCON_JACK_* mean the jack connector.
- EXTCON_DISP_* mean the display port connector.

Following table show the new name of external connector with old name:
--------------------------------------------------
Old extcon name         | New extcon name        |
--------------------------------------------------
EXTCON_TA               | EXTCON_CHG_USB_DCP     |
EXTCON_CHARGE_DOWNSTREAM| EXTCON_CHG_USB_CDP     |
EXTCON_FAST_CHARGER     | EXTCON_CHG_USB_FAST    |
EXTCON_SLOW_CHARGER     | EXTCON_CHG_USB_SLOW    |
--------------------------------------------------
EXTCON_MICROPHONE       | EXTCON_JACK_MICROPHONE |
EXTCON_HEADPHONE        | EXTCON_JACK_HEADPHONE  |
EXTCON_LINE_IN          | EXTCON_JACK_LINE_IN    |
EXTCON_LINE_OUT         | EXTCON_JACK_LINE_OUT   |
EXTCON_VIDEO_IN         | EXTCON_JACK_VIDEO_IN   |
EXTCON_VIDEO_OUT        | EXTCON_JACK_VIDEO_OUT  |
EXTCON_SPDIF_IN         | EXTCON_JACK_SPDIF_IN   |
EXTCON_SPDIF_OUT        | EXTCON_JACK_SPDIF_OUT  |
--------------------------------------------------
EXTCON_HMDI             | EXTCON_DISP_HDMI       |
EXTCON_MHL              | EXTCON_DISP_MHL        |
EXTCON_DVI              | EXTCON_DISP_DVI        |
EXTCON_VGA              | EXTCON_DISP_VGA        |
--------------------------------------------------

And, when altering the name of USB charger connector, EXTCON refers to the
"Battery Charging v1.2 Spec and Adopters Agreement"[1] to use the standard
name of USB charging port as following. Following name of USB charging port
are already used in power_supply subsystem. We chan check it on patch[2].
- EXTCON_CHG_USB_SDP	/* Standard Downstream Port */
- EXTCON_CHG_USB_DCP	/* Dedicated Charging Port */
- EXTCON_CHG_USB_CDP	/* Charging Downstream Port */
- EXTCON_CHG_USB_ACA	/* Accessory Charger Adapter */

[1] www.usb.org/developers/docs/devclass_docs/BCv1.2_070312.zip
[2] commit 85efc8a18c ("power_supply: Add types for USB chargers")

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[ckeepax: For the Arizona changes]
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
2015-10-16 08:30:09 +09:00
Chanwoo Choi de992acb93 extcon: gpio: Use descriptor-based GPIO interface instead of legacy gpio_* API
This patch uses the descriptor-based GPIO interface (gpiod_* API) instead of
legacy gpio_* API and add the internal gpio_extcon_init() to handle
all gpio-related tasks.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-30 19:22:50 +09:00
Chanwoo Choi 6ba129974a extcon: gpio: Fix minor coding style and remove the unused fields.
This patch fixes the minor coding style about indentation and removes the
unused fields from struct gpio_extcon_platform_data.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-30 19:22:50 +09:00
Chanwoo Choi ce6f749605 extcon: gpio: Add the missing supported_cable parameter to devm_extcon_dev_allocate()
The commit 2a9de9c0 ("extcon: Use the unique id for external connector instead
of string") defines the unique id of each external connector to identify the
type of external connector instead of string name. So, devm_extcon_dev_allocate()
should include the second parameter (unsigned int *supported_cable). This patch
adds the supported_cable parameter which is passed by platform data.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-30 19:22:49 +09:00
Chanwoo Choi 60f9b9e65c extcon: gpio: Remove duplicate data from struct gpio_extcon_data
There are duplicate data between struct gpio_extcon_data and struct
gpio_extcon_platform_data. This patch removes them from struct gpio_extcon_data.
Instead, this patch add pdata field to struct gpio_extcon_data.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-30 19:22:49 +09:00
Chanwoo Choi ae59f3a21f extcon: gpio: Use resource managed function for request_irq
This patch uses the resource managed function for registering
interrupt.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-30 19:22:49 +09:00
Chanwoo Choi e9844b2caf extcon: arizona: Reorder the default statement to remove unnecessary warning
This patch reorders the default statement to remove unnecessary warning message
when info->hpdet_ip_version is higher than 2.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2015-09-30 19:11:47 +09:00
Richard Fitzgerald d8d09564b8 extcon: arizona: Add support for WM8998 and WM1814
This patch adds support for the WM8998 and WM1814 codecs.
These use the same IP version as WM5110 but have different
clamp control.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-29 18:11:10 +09:00
Chanwoo Choi 37e57066d5 Merge branch 'ib-extcon-mfd-4.4' into extcon-next 2015-09-29 18:10:04 +09:00
Andrzej Hajda 363b389106 extcon: sm5502: fix handling regmap_irq_get_virq result
The function can return negative value.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-29 17:58:43 +09:00
Andrzej Hajda 238ffc2e64 extcon: rt8973a: fix handling regmap_irq_get_virq result
The function can return negative value.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-29 17:58:43 +09:00
Vaishali Thakkar 4bf27b7038 extcon: axp288: Convert to using managed resources
Use resource managed functions devm_usb_get_phy and
devm_gpio_request to make error path simpler. To be
compatible the change, various gotos are replaced
with direct returns and unnecessary label
gpio_req_failed is dropped.

Also, remove function axp288_extcon_remove as it is
now redundant.

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-29 17:58:42 +09:00
Javier Martinez Canillas ff612f9170 extcon: Export OF module alias information in missing drivers
The I2C core always reports the MODALIAS uevent as "i2c:<modalias>"
regardless of the mechanism that was used to register the device
(i.e: OF or board code) and the table that is used later to match
the driver with the device (i.e: I2C id table or OF match table).

So drivers needs to export the I2C id table and this be built into
the module or udev won't have the necessary information to autoload
the needed driver module when the device is added.

But this means that OF-only drivers needs to have both OF and I2C id
tables that have to be kept in sync and also the dev node compatible
manufacturer prefix is stripped when reporting the MODALIAS. Which can
lead to issues if two vendors use the same I2C device name for example.

To avoid the above, the I2C core behavior may be changed in the future
to not require an SPI device table for OF-only drivers and report the
OF module alias. So, it's better to also export the OF table even when
is unused now to prevent breaking module loading when the core changes.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-29 17:58:42 +09:00
Charles Keepax 6c20b93424 extcon: arizona: Don't disable debounce for inverted jacks
Whilst the jack is connected we disable the jack detection debounce to
ensure as quick as possible a detection of jack removal. However, it is
only safe to disable the jack debounce whilst the jack is connected if
using the micd clamp or the jack is not inverted. Otherwise spurious
interrupts might be generated when we re-enable the debounce.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-22 15:28:00 +09:00
Charles Keepax ff1cb0ed71 extcon: arizona: Use the micd_clamp for interrupts if it is available
Currently we only use the microphone clamp IRQ if GPIO5 is being used as
a second jack detection pin. But we should be using it on any system
where the clamp is available. This patch updates the driver to do so.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-22 15:28:00 +09:00
Nariman Poushin a0ef642849 extcon: arizona: Ignore jd_invert for MICD_CLAMP_STS
The polarity of MICD_CLAMP_STS does not change when different clamp
modes are used, this patch corrects this issue.

Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-22 15:27:59 +09:00
Charles Keepax f719ae3311 extcon: arizona: Additional settings to improve accuracy of HP detect
If the TST_CAP_SEL bits aren't set correctly on wm5110/8280 there will
be a 100k load along side the headphones, which will affect the accurary
towards the very top of the detection range. This patch sets those bits.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-22 15:27:59 +09:00
Charles Keepax 6772a5ab4f extcon: arizona: Add support for general purpose switch
The switch is typically used in conjunction with the MICDET clamp in
order to suppress pops and clicks associated with jack insertion.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-22 15:27:58 +09:00
Charles Keepax df8b6771bd extcon: arizona: Add support for new ADC value mic detect
Newer devices give users the option to make the 3/4 pole jack
determination using a software comparison rather than a hardware one.
This patch adds support for this functionality.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-22 15:27:57 +09:00
Hans de Goede f4513b065f extcon: Fix attached value returned by is_extcon_changed
is_extcon_changed should only check the idx-th bit of new, not
the entirety of new when setting attached.

This fixes extcon sending notifications that a cable was inserted when
it gets removed while another cable is still connected.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-21 15:07:19 +09:00
Linus Torvalds cf9d615f7f regulator: Updates for v4.3
The biggest changes in the core this time around have been some
 refactorings that move us towards being able to drop the list of
 regulators maintained by the core and instead just use the driver model
 list maintained for the class devices for regulators which will make the
 code smaller and avoid some potential bugs.  Otherwise another fairly
 quiet release for the regulator API, highlights include:
 
  - A new API for setting voltages based on a minimum, target, maximum
    triplet.
  - Support for continuous voltage ranges rather than tables of explicit
    steps in the PWM regulator, requiring less explicit configuration.
  - New driver support for Dialog DA9215, Maxim 77843, Mediatek MT6311
    and Qualcomm RPM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJV5DCWAAoJECTWi3JdVIfQDgYH/3mNwtRcwslt8M1L8lzRVyf1
 gRrJY5r4EUOcqqsLnQvDHdjgO2yowEolEd3Hd/GElZqzeFgwXaQ62kHwgqnvOt9k
 O0l99FbU6ECpB56tSENrV1lfvBTlld9bEhq9NhxvNiWAdpGPqIcjvXfSH28GssJ0
 NGr4Yt/A1DG6GsOWxKSODX56WJXJn4emKx3vHH+leUClNWwQVK6JunTmj5IPKLxW
 K94Ke41L3JgAy18TLqvFNlTAC22QaHFaM8ul9v7gnPW+S8Bx15MCQz16rMkGViZV
 c/DyCu69qCVFLI1svRrvB5oq700QT0GT6jANCVmw+CrkIkESwjS39kX861H6hk8=
 =vrVx
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The biggest changes in the core this time around have been some
  refactorings that move us towards being able to drop the list of
  regulators maintained by the core and instead just use the driver
  model list maintained for the class devices for regulators which will
  make the code smaller and avoid some potential bugs.

  Otherwise another fairly quiet release for the regulator API,
  highlights include:

   - a new API for setting voltages based on a minimum, target, maximum
     triplet

   - support for continuous voltage ranges rather than tables of
     explicit steps in the PWM regulator, requiring less explicit
     configuration

   - new driver support for Dialog DA9215, Maxim 77843, Mediatek MT6311
     and Qualcomm RPM"

* tag 'regulator-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (70 commits)
  regulator: mt6311: fix platform_no_drv_owner.cocci warnings
  regulator: ltc3589: Remove unnecessary MODULE_ALIAS()
  regulator: ad5398: Remove unnecessary MODULE_ALIAS()
  regulator: pfuze100: Remove unnecessary MODULE_ALIAS()
  regulator: core: use debug level print in regulator_check_drms
  regulator: lp872x: handle error case
  regulator: lp872x: use the private data instead of updating I2C device platform data
  regulator: isl9305: Export OF module alias information
  regulators: max77693: register driver earlier to avoid deferred probe
  regulator: qcom_smd: Set n_voltages for pm8941_lnldo
  regulator: core: Use IS_ERR_OR_NULL()
  regulator: core: Define regulator_set_voltage_triplet()
  regulator: Regulator driver for the Qualcomm RPM
  regulator: pbias: Fix broken pbias disable functionality
  regulator: core: Spelling fix
  regulator: core: Use class device list for regulator_list in late init
  regulator: core: Move more deallocation into class unregister
  regulator: core: Reduce rdev locking region when releasing regulator
  Input: Remove the max77843 haptic driver
  Input: max77693: Add support for Maxim 77843
  ...
2015-08-31 15:49:19 -07:00
Mark Brown 176175b613 Merge remote-tracking branches 'regulator/topic/lp872x', 'regulator/topic/ltc3589', 'regulator/topic/max77693' and 'regulator/topic/max8973' into regulator-next 2015-08-30 14:39:34 +01:00
Chanwoo Choi ac22a1d338 extcon: palmas: Fix build break due to devm_gpiod_get_optional API change
With commit b17d1bf16c ("gpio: make flags mandatory for gpiod_get functions")
it becomes necessary to pass the flags argument. And this patch adds the gpio
header file to fix the build breakage when build testing with random
configuration files.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2015-08-13 20:56:18 +09:00
Roger Quadros 92b7cb5dc8 extcon: palmas: Support GPIO based USB ID detection
Some palmas based chip variants do not have OTG based ID logic.
For these variants we rely on GPIO based USB ID detection.

These chips do have VBUS comparator for VBUS detection so we
continue to use the old way of detecting VBUS.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-08-10 21:26:25 +09:00
Dan Carpenter a598af7f02 extcon: Fix signedness bugs about break error handling
Unsigned is never less than zero so this error handling won't work.

Fixes: be052cc877 ('extcon: Fix hang and extcon_get/set_cable_state().')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
[cw00.choi: Change the patch title and fix signedness bug of find_cable_index_by_id() ]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-08-10 11:48:57 +09:00
Krzysztof Kozlowski bef025a1f8 extcon: Drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-08-10 11:48:56 +09:00
Charles Keepax bb327e92a9 extcon: arizona: Simplify pdata symantics for micd_dbtime
Currently micd_dbtime can be set to 0 for default, 1 for 4 measurements,
or a greater than 16-bit value for 2 measurements. This patch simplifies
the symantics to 2 for 2 measurements, 4 for 4 measurements and any
other value for the default.

I am not super keen on changing the symantics of the pdata at this stage
in the drivers life, but acceptance of the DT binding for this field has
been made conditional on this happening.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-08-10 11:48:56 +09:00
Charles Keepax 57f70ef9bd extcon: arizona: Declare 3-pole jack if we detect open circuit on mic
Detecting an open-circuit on the microphone pin, usually means the
headset has a microphone but the cable is faulty. Currently the code
will simply stop detecting and declare nothing in this situation. It is
better to declare this as headphones such that the user can still use
their headset as plain headphones even if the microphone is faulty.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-08-10 11:48:56 +09:00
Chanwoo Choi 7eae43aeab extcon: Add exception handling to prevent the NULL pointer access
This patch check whether argument is NULL to prevent NULL pointer access.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-08-10 11:48:56 +09:00
Charles Keepax 0ffe8cbd51 extcon: arizona: Ensure variables are set for headphone detection
The detecting flag really refers to the microphone detection stage and
as such should be cleared before arizona_identify_headphones is called.
Also the mic flag should be set before identify headphones is called as
well.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-08-10 11:48:56 +09:00