Commit Graph

21153 Commits

Author SHA1 Message Date
Alexander Morozov b1a5fad5f8 ASoC: wm8904: add dt ids table
The WM8904 and WM8918 has the same data type, while the WM8912
has different data type. So, use the data in dt ids table to
distinguish them.

Signed-off-by: Alexander Morozov <linux@meltdown.ru>
[voice.shen@atmel.com: add code to distinguish device type]
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:30:12 +00:00
Peter Rosin d11c2978bf ASoC: pcm512x: Support SND_SOC_DAIFMT_CBM_CFS
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:28:54 +00:00
Peter Rosin 7c4e1119a9 ASoC: pcm512x: Avoid the PLL for the DAC clock, if possible
The PLL introduces jitter, which in turn introduces noice if used
to clock the DAC. Thus, avoid the PLL output, and use the PLL input
to drive the DAC clock, if possible.

This is described for the PCM5142/PCM5242 chips in the answers to the
forum post "PCM5142/PCM5242 DAC clock source" at the TI E2E community
pages (1).

(1) http://e2e.ti.com/support/data_converters/audio_converters/f/64/t/389994

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:28:53 +00:00
Peter Rosin f086ba9d53 ASoC: pcm512x: Support mastering BCLK/LRCLK using the PLL
Using the PLL in master mode requires using an external connection
between one of the GPIO pins (configured as PLL/4 output) and the
SCK pin. It also requires the external clock to be fed to some other
GPIO pin instead of the SCK pin.

This is described for the PCM5122 chip in the answers to the forum post
"PCM5122 DAC as I2S master troubles with PLL mode" at the TI E2E
community pages (1). The clocking functionality is also much better
described in the datasheet for the chip PCM5242, which seems to be
register compatible with PCM512x and PCM514x (which both have severely
lacking datasheets).

(1) http://e2e.ti.com/support/data_converters/audio_converters/f/64/t/267830

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:28:53 +00:00
Peter Rosin 8124930713 ASoC: pcm512x: Support mastering BCLK/LRCLK without using the PLL
Use register field names from the seemingly compatible PCM5242 datasheet,
as the PCM512x and PCM514x datasheets are severly lacking.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:28:53 +00:00
Peter Rosin 376dc4903e ASoC: pcm512x: Fix spelling of register field names.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:28:52 +00:00
Peter Rosin f66f898e95 ALSA: pcm: Add snd_interval_ranges() and snd_pcm_hw_constraint_ranges()
Add helper functions to allow drivers to specify several disjoint
ranges for a variable. In particular, there is a codec (PCM512x) that
has a hole in its supported range of rates, due to PLL and divider
restrictions.

This is like snd_pcm_hw_constraint_list(), but for ranges instead of
points.

Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:27:15 +00:00
Andrew Jackson acae254a8e ASoC: dwc: Remove unnecessary conditional compilation
of_match_ptr is already conditionally compiled based on
CONFIG_OF so further conditional compilation is not
required.  Remove conditional compilation surrounding
of_match_ptr.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 17:40:08 +00:00
Takashi Iwai 5da7f924a4 ALSA: usx2y: Move UAPI definition into include/uapi/sound/usb_stream.h
The user-space API definition for usb_stream stuff should be moved
to include/uapi/sound to be exposed publicly.

While we're at it, add the missing ifdef guard for double inclusion,
too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 17:33:49 +01:00
Takashi Iwai ba6211a2e8 ALSA: au88x0: Remove superfluous ifdef __KERNEL__
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 17:26:45 +01:00
Takashi Iwai 976412fbc9 ALSA: Include linux/uaccess.h and linux/bitopts.h instead of asm/*
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 17:25:07 +01:00
Takashi Iwai 6cbbfe1c8d ALSA: Include linux/io.h instead of asm/io.h
Nowadays it's recommended.  Replace all in a shot.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 16:49:33 +01:00
Arnd Bergmann 37419584ab ALSA: sscape: add missing include of linux/io.h
The soundscape driver uses the ISA inb/outb functions declared
in linux/io.h, so it needs to include this header to avoid
a build error:

sscape.c: In function 'sscape_write_unsafe':
sscape.c:203:2: error: implicit declaration of function 'outb' [-Werror=implicit-function-declaration]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 16:27:46 +01:00
Dan Carpenter c33bd08d65 ASoC: Intel: remove an unused struct member
We never set the ->scratch pointer, so let's delete it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 11:36:41 +00:00
Masanari Iida 2f1a11e624 ASoC: Fix warning with make xmldocs caused by soc-devres.c
This patch fix warning while "make xmldocs".

Warning(.//sound/soc/soc-devres.c:70): No description
 found for parameter 'platform_drv'
Warning(.//sound/soc/soc-devres.c:70): Excess function
 parameter 'platform' description in 'devm_snd_soc_register_platform'

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 11:36:03 +00:00
Takashi Iwai 5e0ddd07fa Merge branch 'topic/line6' into for-next 2015-01-28 07:24:41 +01:00
Takashi Iwai 247d95ee6d ALSA: line6: Handle error from line6_pcm_acquire()
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:57 +01:00
Takashi Iwai 2954f914f2 ALSA: line6: Make common PCM pointer callback
Both playback and capture callbacks are identical, so let's merge
them.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:45 +01:00
Takashi Iwai 63e20df1e5 ALSA: line6: Reorganize PCM stream handling
The current code deals with the stream start / stop solely via
line6_pcm_acquire() and line6_pcm_release().  This was (supposedly)
intended to avoid the races, but it doesn't work as expected.  The
concurrent acquire and release calls can be performed without proper
protections, thus this might result in memory corruption.
Furthermore, we can't take a mutex to protect the whole function
because it can be called from the PCM trigger callback that is an
atomic context.  Also spinlock isn't appropriate because the function
allocates with kmalloc with GFP_KERNEL.  That is, these function just
lead to singular problems.

This is an attempt to reduce the existing races.  First off, separate
both the stream buffer management and the stream URB management.  The
former is protected via a newly introduced state_mutex while the
latter is protected via each line6_pcm_stream lock.

Secondly, the stream state are now managed in opened and running bit
flags of each line6_pcm_stream.  Not only this a bit clearer than
previous combined bit flags, this also gives a better abstraction.
These rewrites allows us to make common hw_params and hw_free
callbacks for both playback and capture directions.

For the monitor and impulse operations, still line6_pcm_acquire() and
line6_pcm_release() are used.  They call internally the corresponding
functions for both playback and capture streams with proper lock or
mutex.  Unlike the previous versions, these function don't take the
bit masks but the only single type value.  Also they are supposed to
be applied only as duplex operations.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:36 +01:00
Takashi Iwai f2bb614bb6 ALSA: line6: Clear prev_fbuf and prev_fsize properly
Clearing prev_fsize in line6_pcm_acquire() is pretty racy.
This can be called at any time while the stream is being played.
Rather better to clear prev_fbuf and prev_fsize at the proper place
like the stream stop for capture, and just after copying the monitor /
impulse data inside the spinlock.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:30 +01:00
Takashi Iwai 3d3ae4454d ALSA: line6: Fix racy loopback handling
The impulse and monitor handling in submit_audio_out_urb() isn't
protected thus this can be racy with the capture stream handling.
This patch extends the range to protect via each stream's spinlock
(now the whole submit_audio_*_urb() are covered), and take the capture
stream lock additionally for the impulse and monitor handling part.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:23 +01:00
Takashi Iwai d6ca69d825 ALSA: line6: Minor tidy up in line6_probe()
Move the check of multi configurations before snd_card_new() as a
short path, and reduce superfluous pointer references.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:16 +01:00
Takashi Iwai aca514b823 ALSA: line6: Let snd_card_new() allocate private data
Instead of allocating the private data individually in each driver's
probe at first, let snd_card_new() allocate the data that is called in
line6_probe().  This simplifies the primary probe functions.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:22:07 +01:00
Takashi Iwai f66fd990c5 ALSA: line6: Drop interface argument from private_init and disconnect callbacks
The interface argument is used just for retrieving the assigned
device, which can be already found in line6->ifcdev.  Drop them from
the callbacks.  Also, pass the usb id to private_init so that the
driver can deal with it there.  This is a preliminary work for the
further cleanup to move the whole allocation into driver.c.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:59 +01:00
Takashi Iwai 62a109d9e2 ALSA: line6: Skip volume manipulation during silence copying
A minor optimization; while pausing, the driver just copies the zero
that doesn't need any volume changes.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:52 +01:00
Takashi Iwai c8491535d7 ALSA: line6: Do clipping in volume / monitor manipulations
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:45 +01:00
Takashi Iwai e90576c595 ALSA: line6: Consolidate PCM stream buffer allocation and free
The PCM stream buffer allocation and free are identical for both
playback and capture streams.  Provide single helper functions.
These are used only in pcm.c, thus they can be even static.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:39 +01:00
Takashi Iwai ccaac9ed79 ALSA: line6: Use dev_err()
This is the last remaining snd_printk() usage in this driver.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:33 +01:00
Takashi Iwai d8131e67f0 ALSA: line6: Consolidate URB unlink and sync helpers
The codes to unlink and sync URBs are identical for both playback and
capture streams.  Consolidate to single helper functions.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:27 +01:00
Takashi Iwai ad0119abe2 ALSA: line6: Rearrange PCM structure
Introduce a new line6_pcm_stream structure and group individual
fields of snd_line6_pcm struct to playback and capture groups.

This patch itself just does rename and nothing else.  More
meaningful cleanups based on these fields shuffling will follow.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:18 +01:00
Takashi Iwai ab5cdcbab2 ALSA: line6: Drop voodoo workarounds
If the problem still really remains, we should fix it instead of
papering over it like this...

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:12 +01:00
Takashi Iwai 9fb754b79e ALSA: line6: Use incremental loop
Using a decremental loop without particular reasons worsens the
readability a lot.  Use incremental loops instead.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:06 +01:00
Takashi Iwai f2a76225b9 ALSA: line6: Drop superfluous spinlock for trigger
The trigger callback is already spinlocked, so we need no more lock
here (even for the linked substreams).  Let's drop it.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:21:00 +01:00
Takashi Iwai 5343ecf4e5 ALSA: line6: Fix the error recovery in line6_pcm_acquire()
line6_pcm_acquire() tries to restore the newly obtained resources at
the error path.  But some flags aren't recorded and released properly
when the corresponding buffer is already present.  These bits have to
be cleared in the error recovery, too.

Also, "flags_final" can be initialized to zero since we pass only the
subset of "channels" bits.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:53 +01:00
Takashi Iwai 6aa7f8ef29 ALSA: line6: Use logical OR
Fixed a few places using bits OR wrongly for condition checks.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:46 +01:00
Takashi Iwai eab22e4053 ALSA: line6: Fix missing error handling in line6_pcm_acquire()
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:40 +01:00
Takashi Iwai bc518ba4cc ALSA: line6: Reduce superfluous spinlock in midi.c
The midi_transmit_lock is used always inside the send_urb_lock, thus
it doesn't play any role.  Let's kill it.  Also, rename
"send_urb_lock" as a more simple name "lock" since this is the only
lock for midi.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:34 +01:00
Takashi Iwai b55004f9fd ALSA: line6: Remove unused line6_nop_read()
The function isn't used any longer after rewriting from sysfs to leds
class in toneport.c.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:28 +01:00
Takashi Iwai 6b562f63dd ALSA: line6: Fix memory leak at probe error path
Fix memory leak at probe error path by rearranging the call order in
line6_destruct() so that the common destructor is always called.
Also this simplifies the error path to a single goto label.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:21 +01:00
Takashi Iwai 644d90850c ALSA: line6: Minor refactoring
Split some codes in the lengthy line6_probe().

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:15 +01:00
Takashi Iwai f44edd7b2b ALSA: line6/toneport: Implement LED controls via LED class
Instead of non-standard sysfs, reimplement the LED controls on
TonePort as LED class devices.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:08 +01:00
Takashi Iwai bf115fcf95 ALSA: line6/toneport: Fix wrong argument for toneport_has_led()
Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:20:02 +01:00
Takashi Iwai eedd0e95d3 ALSA: line6: Don't forget to call driver's destructor at error path
Currently disconnect callback is used as a driver's destructor, and
this has to be called not only at the disconnection time but also at
the error paths during probe.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:19:55 +01:00
Takashi Iwai 6dd1c05cd7 ALSA: line6/toneport: Move setup_timer() at the beginning
... so that timer_del_sync() in the destructor can be called safely at
any time.  Also move the mod_timer() call in toneport_setup(), which
is a bit clearer place.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:19:47 +01:00
Takashi Iwai 8a3b7c086a ALSA: line6: Remove superfluous NULL checks in each driver
The interface and driver objects are always set when callbacks are
called.  Drop such superfluous NULL checks in init and disconnect
calls of each driver.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:19:37 +01:00
Takashi Iwai 2a324fcdb5 ALSA: line6: Abort if inconsistent usbdev is found at disconnect
It's utterly unsafe to proceed further the disconnect procedure if the
assigned usbdev is inconsistent with the expected object.  Better to
put a WARN_ON() for more cautions and abort immediately.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:19:29 +01:00
Takashi Iwai 270fd9c7f9 ALSA: line6: Yet more cleanup of superfluous NULL checks
... in line6_disconnect() as well.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 07:18:04 +01:00
David S. Miller 95f873f2ff Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	arch/arm/boot/dts/imx6sx-sdb.dts
	net/sched/cls_bpf.c

Two simple sets of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27 16:59:56 -08:00
Mark Brown 60d66c9a24 Merge branch 'topic/arizona' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-w-codec 2015-01-27 23:52:44 +00:00
Bard Liao 5c4ca99df7 ASoC: rt5645: Add rt5650 codec support
This patch adds support for rt5650 codec.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 18:37:27 +00:00
Jie Yang 09a34aa582 ASoC: Intel: Used lock version to update shim registers
We need hold lock each time updating shirm registers, otherwise,
we may set unexpected values to them when they are set in
different thread at different time sequence.

The notification work will be scheduled in global work queue,
which won't hold this sst->spinlock itself, so here we need
change to use the lock version to update shim registers.

Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 18:36:22 +00:00
Anatol Pomozov 39552d7ad1 ASoC: ts3a227e: Add dts property that allows to specify micbias voltage
The voltage controls key press threshold.

Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 18:32:14 +00:00
Anatol Pomozov ddf9ea21f5 ASoC: ts3a227e: Remap keys to match Android headset specification
ts3a227e datasheet says typical key resistance is
  key1 50 Ohm
  key2 135 Ohm
  key3 240 Ohm
  key4 470 Ohm

The android headset specification expect buttons impedance:
  A (MEDIA) 0-70 Ohm
  D (VOICECOMMAND) 110-180 Ohm
  B (VOLUMEUP) 210-290 Ohm
  C (VOLUMEDOWN) 360-680 Ohm

Thus key mapping should be
  key1 - MEDIA
  key2 - VOICECOMMAND
  key3 - VOLUMEUP
  key3 - VOLUMEDOWN

Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Acked-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 18:32:04 +00:00
Manuel Lauss 8a6cf30bf9 ASoC: wm8731: init mutex in i2c init path
The I2C init path forgot to init the mutex, leading to an oops when
controls are accessed.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-01-27 18:21:26 +00:00
Mark Brown 8d23dd9c66 Merge branch 'fix/rt5677' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-w-codec 2015-01-27 17:54:24 +00:00
Mark Brown a7834aa932 Merge branch 'topic/rt286' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-w-codec
Conflicts:
	sound/soc/codecs/rt286.c
2015-01-27 17:52:51 +00:00
Bo Shen 67d1aed0a5 ASoC: atmel_ssc_dai: remove clock pin comments
As the clock can be get from TK/RK pin, so remove the comments.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 17:35:56 +00:00
Mark Brown c90ff1fb7b Merge branch 'fix/atmel' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-atmel 2015-01-27 17:35:41 +00:00
Bo Shen a43bd7e125 ASoC: atmel_ssc_dai: fix start event for I2S mode
According to the I2S specification information as following:
  - WS = 0, channel 1 (left)
  - WS = 1, channel 2 (right)
So, the start event should be TF/RF falling edge.

Reported-by: Songjun Wu <songjun.wu@atmel.com>
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-01-27 17:32:36 +00:00
Charles Keepax e1ae5fba3f ASoC: arizona: Coalesce output power up delays
Save a bit of scheduling by coalescing all the output power up delays
into a single delay.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 17:28:50 +00:00
Charles Keepax 054e1b4892 ASoC: arizona: Add delay for output disable
Give the output disable sequence a chance to fully complete, otherwise
there is a danger we may remove the clock before it is finished
resulting in a pop noise. The delay for each output must be cumulative
and these are coalesced into a single delay.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 17:28:50 +00:00
Thomas Niederprüm 3c9390ad0f ASoC: sta32x: change dai name to be in line with the sta350 driver.
Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 17:13:28 +00:00
Thomas Niederprüm 6fad625999 ASoC: sta32x: minor Kconfig update.
- Add description for the driver
- Add dependency on the I2C module

Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 17:13:27 +00:00
Thomas Niederprüm 30374d5dd3 ASoC: sta32x: use dev_dbg() for debug output.
Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 17:13:25 +00:00
Thomas Niederprüm f04b1e760a ASoC: sta32x: add device tree binding.
make the sta32x driver usable with device tree configs.  Code is heavily based
on the sta350 driver.

Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 17:13:25 +00:00
Thomas Niederprüm 1c34c876c4 ASoC: sta32x: move code to calculate mclk divider and extrapolation ratio to sta32x_hw_params()
Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 17:13:24 +00:00
Thomas Niederprüm 88483f59d9 ASoC: sta32x: use DECLARE_TLV_DB_RANGE macro.
Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 17:13:23 +00:00
Thomas Niederprüm b66a29808e ASoC: sta32x: make sta32x a gpio consumer for the reset GPIO
The reset GPIO on the STA32X Codecs is used to reset the Codec and clear
all registers. Also taking it down puts the IC in power save mode, so
we put the device in reset mode when we go to sleep.

Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 17:13:22 +00:00
Thomas Niederprüm a1be4cead9 ASoC: sta32x: Convert to direct regmap API usage.
use the regmap API directly rather than relying on the snd_soc_read/write
functions as this seems to be in accordance with common practice.

Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 17:13:21 +00:00
Thomas Niederprüm b0402717c9 ASoC: sta32x: correct bit shift value for IDE register
The IDE bit in the CONFF register is the third bit not the fourth.

Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 17:10:00 +00:00
Jarkko Nikula 3463667aa1 ASoC: rt5640: Add RT5642 ACPI ID for Intel Baytrail
Asus T100TAF uses ACPI ID "10EC5642" for its audio codec. I suppose it is
updated ACPI ID for the RT5642 codec since some earlier platforms are using
"10EC5640" with the RT5642 too.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-26 19:17:03 +00:00
Bard Liao 54d96a40e0 ASoC: rt286: Fix capture volume setting issue
The purpose of rt286_adc_event is to mute/numnte the ADC mixer.
However, it will also set the capture volume to default value.
As a result, "ADC0 Capture Volume" is not working if it is set
before capture start. This patch remove rt286_adc_event and add
"ADC0 Capture Switch" to mute/unmute ADC mixer.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-26 19:16:18 +00:00
Lars-Peter Clausen f8d71be555 ASoC: wm97xx: Reset AC'97 device before registering it
The wm97xx touchscreen driver binds itself to the snd_ac97 device that gets
registered by the CODEC driver and expects that the device has already been
reset. Before commit 6794f709b7 ("ASoC: ac97: Drop delayed device
registration") the device was only registered after the probe function of
the CODEC driver had finished running, but starting with the mentioned
commit the device is registered as soon as snd_soc_new_ac97_codec() is
called. This causes the touchscreen driver to no longer work. Modify the
CODEC drivers to use snd_soc_alloc_ac97_codec() instead of
snd_soc_new_ac97_codec() and make sure that the AC'97 device is reset before
the snd_ac97 device gets registered.

Fixes: 6794f709b7 ("ASoC: ac97: Drop delayed device registration")
Reported-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Manuel Lauss <manuel.lauss@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-01-26 19:15:06 +00:00
Lars-Peter Clausen 47e039413c ASoC: Add support for allocating AC'97 device before registering it
In some cases it is necessary to before additional operations after the
device has been initialized and before the device is registered. This can
for example be resetting the device.

This patch introduces a new function snd_soc_alloc_ac97_codec() which is
similar to snd_soc_new_ac97_codec() except that it does not register the
device. Any users of snd_soc_alloc_ac97_codec() are responsible for calling
device_add() manually.

Fixes: 6794f709b7 ("ASoC: ac97: Drop delayed device registration")
Reported-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-01-26 19:14:20 +00:00
Clemens Ladisch a55bdf1ec5 ALSA: seq: remove unused callback_all field
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-26 13:56:58 +01:00
Clemens Ladisch de20b572a3 ALSA: seq: fix off-by-one error in port limit check
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-26 13:54:47 +01:00
Clemens Ladisch 467be357c6 ALSA: seq: correctly report maximum number of ports
Due to SNDRV_SEQ_ADDRESS_BROADCAST, not all 256 port number values can
be used.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-26 13:54:39 +01:00
Takashi Iwai 7533185eee Merge branch 'for-linus' into for-next
Sync with the latest 3.19-rc state for applying other ALSA sequencer
core fixes.
2015-01-26 13:53:41 +01:00
Clemens Ladisch 0767e95bb9 ALSA: seq-dummy: remove deadlock-causing events on close
When the last subscriber to a "Through" port has been removed, the
subscribed destination ports might still be active, so it would be
wrong to send "all sounds off" and "reset controller" events to them.
The proper place for such a shutdown would be the closing of the actual
MIDI port (and close_substream() in rawmidi.c already can do this).

This also fixes a deadlock when dummy_unuse() tries to send events to
its own port that is already locked because it is being freed.

Reported-by: Peter Billam <peter@www.pjb.com.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-26 13:53:13 +01:00
Mark Brown 88343ee38d Merge remote-tracking branches 'asoc/fix/rt5677', 'asoc/fix/simple', 'asoc/fix/ts3a227e', 'asoc/fix/wm8904' and 'asoc/fix/wm8960' into asoc-linus 2015-01-26 11:29:58 +00:00
Mark Brown 8a6dcddf4c Merge remote-tracking branches 'asoc/fix/adi', 'asoc/fix/compress', 'asoc/fix/fsl-ssi', 'asoc/fix/imx', 'asoc/fix/intel', 'asoc/fix/omap', 'asoc/fix/rockchip' and 'asoc/fix/rt286' into asoc-linus 2015-01-26 11:29:55 +00:00
Mark Brown a9bb437ab0 Merge remote-tracking branch 'asoc/fix/pcm512x' into asoc-linus 2015-01-26 11:29:55 +00:00
Mark Brown d9b35aa056 Merge remote-tracking branch 'asoc/fix/fsl-esai' into asoc-linus 2015-01-26 11:29:54 +00:00
TienFu Chen b4b33f9d64 ALSA: hda - Enable docking station for an HP machine
On this machine we need to inform the driver where the docking
station pins are, because it has not been set up by BIOS.

Tested-by: TienFu Chen <tienfu.chen@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1412800
Signed-off-by: TienFu Chen <tienfu.chen@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 15:09:19 +01:00
Takashi Iwai 3b15d0d505 Merge branch 'topic/timer-cleanup' into for-next 2015-01-20 10:11:27 +01:00
Takashi Iwai 86b5f3ec41 Merge branch 'topic/line6' into for-next 2015-01-20 10:08:06 +01:00
Chris Rorvick c078a4aac2 ALSA: line6: Remove driver version from header comment
The driver version string was removed in an ealier commit for being
useless.  These are equally useless.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 09:52:40 +01:00
Chris Rorvick c6fffce92e ALSA: line6: Refer to manufacturer as "Line 6"
The correct spelling includes the space.  Fix this in strings and
comments that refer to the manufacturer.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 09:52:30 +01:00
Chris Rorvick 35ae48a3f4 ALSA: line6: Remove superfluous NULL checks
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 09:52:20 +01:00
Takashi Iwai 4d79fb1ed2 ALSA: line6: Drop line6_send_program() and line6_transmit_parameter()
Both functions are used nowhere.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:19:12 +01:00
Takashi Iwai 7372319028 ALSA: line6: Make line6_send_raw_message() static
It's used only locally.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:19:05 +01:00
Takashi Iwai 5a4753112a ALSA: line6: Sync PCM stop at disconnect
Call line6_pcm_disconnect() at disconnect to make sure that all URBs
are cleared.  Also reduce the superfluous snd_pcm_stop() calls from
the function (and remove the unused function) since the streams are
guaranteed to be stopped at this point via snd_card_disconnect().

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:18:44 +01:00
Takashi Iwai 31ca192139 ALSA: line6: Remove superfluous disconnect call in suspend handler
Calling line6_pcm_disconnect() at suspend callback is superfluous and
rather confusing.  Let's get rid of it.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:18:33 +01:00
Takashi Iwai b2a3b02392 ALSA: line6: Remove CHECK_RETURN macro
Such a macro doesn't improve readability.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:18:27 +01:00
Takashi Iwai 10e3a023c9 ALSA: line6: Drop MISSING_CASE macro
Such a debug is needed in the core code, not in each lowlevel driver.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:18:20 +01:00
Takashi Iwai 2cd53fa9d3 ALSA: line6: Remove driver version string
This is rather useless for a driver that has been already merged into
the official tree.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:18:10 +01:00
Takashi Iwai 85a9339bec ALSA: line6: Reorganize card resource handling
This is a fairly big rewrite regarding the card resource management in
line6 drivers:

- The card creation is moved into line6_probe().  This adds the global
  destructor to private_free, so that each driver doesn't have to call
  it any longer.

- The USB disconnect callback handles the card release, thus each
  driver needs to concentrate on only its own resources.  No need to
  snd_card_*() call in the destructor.

- Fix the potential stall in disconnection by removing
  snd_card_free().   It's replaced with snd_card_free_when_closed()
  for asynchronous release.

- The only remaining operation for the card in each driver is the call
  of snd_card_register().  All the rest are dealt in the common module
  by itself.

- These ended up with removal of audio.[ch] as a result of a reduction
  of one layer.  Each driver just needs to call line6_probe().

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:17:16 +01:00
Takashi Iwai 84ac9bb12e ALSA: line6: Drop superfluous irqsave/irqrestore in PCM trigger callback
The PCM trigger callback is guaranteed to be called already in
spinlock / irq-disabled context.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:16:18 +01:00
Takashi Iwai 7d70c81cca ALSA: line6: Don't handle PCM trigger for other cards
Otherwise it oopses.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:16:10 +01:00
Takashi Iwai a019f5e8c5 ALSA: line6: Remove superfluous out-of-memory error messages
Kernel already shows the error in the common path.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:16:01 +01:00
Takashi Iwai 45a82f1891 ALSA: line6: Drop usb_device sysfs symlink
It's non-standard and rather superfluous.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:15:53 +01:00
Takashi Iwai 988d350aef ALSA: line6: Drop invalid SNDRV_PCM_INFO_RESUME flag
The line6 drivers don't support the full resume although they set
SNDRV_PCM_INFO_RESUME.  These flags have to be dropped to inform
properly to the user-space.

Also, drop the CONFIG_PM in trigger callbacks, too, which are rather
superfluous.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:15:38 +01:00
Takashi Iwai aaa68d2f29 ALSA: line6: Drop superfluous snd_device for rawmidi
Like the previous fix for PCM, attach the card-specific resource into
rawmidi->private_data instead of handling in a snd_device object.
This simplifies the code and structure.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:15:02 +01:00
Takashi Iwai b45a7c5654 ALSA: line6: Drop superfluous snd_device for PCM
Instead of handling the card-specific resource in snd_device, attach
it into pcm->private_data and release it directly in private_free.
This simplifies the code and structure.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:14:55 +01:00
Takashi Iwai 075587b723 ALSA: line6: Handle impulse response via control API
Instead of sysfs and the conditional build with Kconfig, implement the
handling of the impulse response controls via control API, and always
enable the build.  Two new controls, "Impulse Response Volume" and
"Impulse Response Period" are added as a replacement for the former
sysfs files.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:14:36 +01:00
Takashi Iwai ccddbe4a99 ALSA: line6: Split to each driver
Split to each individual driver for POD, PODHD, TonePort and Variax
with a core LINE6 helper module.  The new modules follow the standard
ALSA naming rule with snd prefix: snd-usb-pod, snd-usb-podhd,
snd-usb-toneport and snd-usb-variax, together with the corresponding
CONFIG_SND_USB_* Kconfig items.

Tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-20 08:14:17 +01:00
Takashi Iwai 0f2524b347 ALSA: line6: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:46:02 +01:00
Takashi Iwai 28e237a9b7 ALSA: usb-audio: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:43:50 +01:00
Takashi Iwai abd083526a ALSA: emux: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:41:13 +01:00
Takashi Iwai da1a39242a ALSA: aica: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:35:01 +01:00
Takashi Iwai 04018e137c ALSA: hdspm: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:34:45 +01:00
Takashi Iwai c41c009ed5 ALSA: hdsp: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:34:36 +01:00
Takashi Iwai 3d6f0e0cb3 ALSA: korg1212: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:34:18 +01:00
Takashi Iwai 8a3e7dfc90 ALSA: echoaudio: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:33:20 +01:00
Takashi Iwai 6fec2b5723 ALSA: asihpi: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:32:51 +01:00
Takashi Iwai b843ce7425 ALSA: wavefront: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:32:28 +01:00
Takashi Iwai f05b412773 ALSA: sb: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:32:28 +01:00
Takashi Iwai 867a0e057f ALSA: ak4117: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:32:27 +01:00
Takashi Iwai d80d05fcca ALSA: serial-u16550: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:32:26 +01:00
Takashi Iwai f5d5f75fe1 ALSA: opl3: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:32:26 +01:00
Takashi Iwai 2b1b781143 ALSA: mtpav: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:32:10 +01:00
Takashi Iwai b093ed23da ALSA: mpu401: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:28:13 +01:00
Takashi Iwai db974553e3 ALSA: aloop: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:27:31 +01:00
Takashi Iwai f169c10597 ALSA: timer: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:26:25 +01:00
Roman Kollar 2a52b6eef7 ALSA: dummy: use setup_timer and mod_timer
Use setup_timer and mod_timer instead of structure assignments as it
is the preferred way to setup and set the timer.

Signed-off-by: Roman Kollar <rkollar@mail.muni.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 10:49:52 +01:00
Jason Lee Cragg 6455931186 ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210
Signed-off-by: Jason Lee Cragg <jcragg@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-18 10:03:50 +01:00
Clemens Ladisch 25ca917c0f ALSA: firewire-lib: limit the MIDI data rate
Do no send MIDI bytes at the full rate at which FireWire packets happen
to be sent, but restrict them to the actual rate of a real MIDI port.
This is required by the specification, and prevents data loss when the
device's buffer overruns.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16 22:51:23 +01:00
Clemens Ladisch 5c697e5b46 ALSA: firewire-lib: remove rx_blocks_for_midi quirk
There are several devices that expect to receive MIDI data only in the
first eight data blocks of a packet.  If the driver restricts the data
rate to the allowed rate (as mandated by the specification, but not yet
implemented by this driver), this happens naturally.  Therefore, there
is no reason to ever try to use more data packets with any device.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16 22:50:45 +01:00
Clemens Ladisch 53c098bfc5 ALSA: add Studio Evolution SE6X support
Add a driver for an embedded sound card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16 22:44:56 +01:00
Clemens Ladisch a5a3353367 ALSA: oxygen: add XIO2001 initialization
Configure the XIO2001 bridge on PCI Express cards so that it does less
needless prefetching.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16 22:44:36 +01:00
Clemens Ladisch 0902fbb9cc ALSA: oxygen: add support for third analog input
Make it possible for cards to have three stereo analog input pairs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16 22:44:08 +01:00
Clemens Ladisch 20eb26a2ec ALSA: oxygen: do not create useless S/PDIF controls
Cards without S/PDIF output do not need those controls.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16 22:43:50 +01:00
Lars-Peter Clausen a59aa180ea ASoC: samsung: Replace depends on REGMAP_I2C with depends on I2C
regmap is a library function that gets selected by drivers that need it. No
driver modules should depend on it, since this can create dependency loops.

E.g. if machine driver depends on REGMAP_I2C and selects the CODEC driver
and the CODEC driver selects REGMAP_I2C, then the machine driver selects by
extension one of its dependencies.

The proper way to handle this is for machine drivers to depend on the same
dependencies as the CODEC driver they select. In this case it is I2C.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-16 19:05:45 +00:00
Lars-Peter Clausen e236d4d796 ASoC: smdk_wm8580: Pass card DAPM context to snd_soc_dapm_disable_pin()
The "MicIn" widget is a card level DAPM element so pass the card's DAPM
context instead of the CODEC's DAPM context to snd_soc_dapm_disable_pin().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-16 16:59:36 +00:00
Lars-Peter Clausen 3a41e0f723 ASoC: jive: Automatically disconnect non-connected pins
All DAPM input and output pins of the wm8750 are either used in the card's
DAPM routing table or are marked as not connected.

Set the fully_routed flag of the card instead of manually marking the unused
inputs and outputs as not connected. This makes the code a bit shorter and
cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-16 16:59:08 +00:00
Mark Brown 5d6bdfd568 Merge branch 'topic/dai' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-samsung 2015-01-16 16:59:04 +00:00
Peter Ujfalusi 20602e34cd ASoC: omap-mcbsp: Correct CBM_CFS dai format configuration
We should select FSR also to be driven by McBSP, not only FSX.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-01-16 11:46:31 +00:00
Qais Yousef d3268a40d4 ASoC: soc-compress.c: fix NULL dereference
In soc_new_compress() when rtd->dai_link->dynamic is set, we create the pcm
substreams with this call:

   ret = snd_pcm_new_internal(rtd->card->snd_card, new_name, num,
                                   1, 0, &be_pcm);

which passes 0 as capture_count leading to

   be_pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream

being NULL, hence when trying to set rtd a few lines below we get an oops.

Fix by using rtd->dai_link->dpcm_playback and rtd->dai_link->dpcm_capture as
playback_count and capture_count to snd_pcm_new_internal().

Signed-off-by: Qais Yousef <qais.yousef@imgtec.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-01-15 15:54:04 +00:00
Geert Uytterhoeven 80dbb01ad7 sound: dmasound_atari: Remove obsolete IRQ_TYPE_SLOW
IRQ_TYPE_SLOW is no longer used by the Atari platform interrupt code
since commit 734085651c ("[PATCH] m68k: convert atari irq code")
in v2.6.18-rc1, so drop it.

Note that its value has been reused for a different purpose
(IRQ_TYPE_NONE) since commit 6a6de9ef58 ("[PATCH] genirq: core")
in v2.6.18-rc1.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
2015-01-15 13:44:51 +01:00
Lars-Peter Clausen 96da4e5b2e ASoC: Remove codec field from snd_soc_dapm_widget
There are no more users of this field left so it can finally be removed.
New users should use snd_soc_dapm_to_codec(w->dapm);

The reason why it is removed is because it doesn't fit to well anymore in
the componentized ASoC hierarchy, where DAPM works on the snd_soc_component
level. And the alternative of snd_soc_dapm_to_codec(w->dapm) typically
generates the same amount of code, so there is really no reason to keep it.

For automatic conversion the following coccinelle semantic patch can be used:
// <smpl>
@@
struct snd_soc_dapm_widget *w;
@@
-w->codec
+snd_soc_dapm_to_codec(w->dapm)
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:34 +00:00
Lars-Peter Clausen 46f20872bc ASoC: rt5677: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:34 +00:00
Mark Brown 5f7201d5d6 Merge branch 'topic/rt5677' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-w-codec 2015-01-15 11:57:23 +00:00
Lars-Peter Clausen 8eee1468ee ASoC: rt5670: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:06 +00:00
Lars-Peter Clausen 30c173ed3e ASoC: rt5651: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:06 +00:00
Lars-Peter Clausen c5f596cb4b ASoC: rt5645: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:06 +00:00
Lars-Peter Clausen bb1cd608b1 ASoC: rt5640: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:06 +00:00
Lars-Peter Clausen 4389eb2907 ASoC: rt5631: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:06 +00:00
Lars-Peter Clausen 76f17f185e ASoC: rt286: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:06 +00:00
Lars-Peter Clausen 0bb043f523 ASoC: alc5632: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:06 +00:00
Lars-Peter Clausen a50d761f6d ASoC: alc5623: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:06 +00:00
Lars-Peter Clausen b27727df32 ASoC: twl6040: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:06 +00:00
Lars-Peter Clausen a36ac9b32c ASoC: twl4030: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:06 +00:00
Lars-Peter Clausen c61ac6b7eb ASoC: tlv320dac33: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:06 +00:00
Lars-Peter Clausen 38d3df61e0 ASoC: tlv320aic3x: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:06 +00:00
Lars-Peter Clausen dd943d36f1 ASoC: tlv320aic31xx: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:05 +00:00
Lars-Peter Clausen 0d76091ca8 ASoC: pcm3008: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:05 +00:00
Lars-Peter Clausen 7331ea474e ASoC: mioa701_wm9713: Fix speaker event
Commit f6b2a04590 ("ASoC: pxa: mioa701_wm9713: Convert to table based DAPM
setup") converted the driver to register the board level DAPM elements with
the card's DAPM context rather than the CODEC's DAPM context. The change
overlooked that the speaker widget event callback accesses the widget's
codec field which is only valid if the widget has been registered in a CODEC
DAPM context. This patch modifies the callback to take an alternative route
to get the CODEC.

Fixes: f6b2a04590 ("ASoC: pxa: mioa701_wm9713: Convert to table based DAPM
setup")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:05 +00:00
Jyri Sarha f9911803e8 ASoC: simple-card: Enable and disable DAI clocks as needed
Call clk_prepare_enable() and clk_disable_unprepare() for cpu dai
clock and codec dai clock in dai statup and shutdown callbacks. This
to make sure the related clock are enabled when the audio device is
used.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:45:52 +00:00
Kuninori Morimoto 8048b91ffc ASoC: rsnd: tidyup DVC/SRC/SSI order
Current R-Car sound driver calls SRC -> SSI -> DVC functions,
but, it should be DVC -> SRC -> SSI.
Otherwise, SSI (= interface of codec) will have underrun error
when playback.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:49 +00:00
Kuninori Morimoto 1ceeab2679 ASoC: rsnd: tidyup DMA start/stop timing on SSI
Current DMA starts after SSI, and stops before SSI. but we need
to reverse these order. Otherwise, under/over run error might happen.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:49 +00:00
Kuninori Morimoto 765ae7c8dd ASoC: rsnd: ignore DIRQ when DMA transfer
SSI interrupt handler of R-Car sound driver will be called
when DIRQ (= Data read/write timing for PIO) or
UIRQ / OIRQ (= under/over run error).
DIRQ "interrupt" doesn't occur when DMA transfer, but then,
DIRQ "status bit" might occur. we need to ignore this DIRQ
operation when DMA. Otherwise, driver will push/pop as PIO.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:48 +00:00
Kuninori Morimoto 337b0b4c5f ASoC: rsnd: error meesage indicates its port
Current SRC/SSI output its error, but it desn't indicate
port number. it is un-understandable.
Let's indicate port number for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:48 +00:00
Kuninori Morimoto 1b13d118ee ASoC: rsnd: save priv in struct rsnd_dai
Current rsnd driver has rsnd_mod_to_priv() macro, and struct rsnd_mod
has struct rsnd_priv pointer. But, it is waste of memory from data
structure point of view.
Today we can link mod <-> io <-> rdai each other, so saving priv in
rdai is very reasonable.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:48 +00:00
Kuninori Morimoto 690602fcd8 ASoC: rsnd: replace rdai to priv in each function
Current rsnd driver's function requests rdai, but it is not used.
Adding priv is more reasonable. Let's replace it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:48 +00:00
Kuninori Morimoto f708d944fe ASoC: rsnd: remove unsed rdai parameter from each function
Current rsnd driver's many functions requests struct rsnd_dai (= rdai),
but, 1) we can get rdai from rsnd_io_to_rsnd(), 2) almost all rdai
is not used. Let's remove these rdai.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:48 +00:00
Kuninori Morimoto 985a4f6e61 ASoC: rsnd: replace rsnd_dai_is_play() to rsnd_io_is_play()
Current rsnd driver can use rsnd_io_to_rdai()
we can get play/capture direction via io now.
Let's replace rsnd_dai_is_play() to rsnd_io_is_play()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:48 +00:00
Kuninori Morimoto 54cb556247 ASoC: rsnd: add rsnd_io_to_rdai()
Current rsnd driver request rdai in everywhere, but each mod should
reach to rdai by itself. this patch adds missing rsnd_io_to_rdai().

io   = rsnd_mod_to_io(mod);
rdai = rsnd_io_to_rdai(io);

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:48 +00:00
Kuninori Morimoto 7c57d76f51 ASoC: rsnd: remove rsnd_dai_get_platform_info() macro
rsnd_dai_get_platform_info() is not used. Let's remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:48 +00:00
Kuninori Morimoto 2842aa7192 ASoC: rsnd: remove unused rsnd_dai_id()
rsnd_dai_id() was not used. Let's remove it

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:48 +00:00
Kuninori Morimoto 3ed6448c95 ASoC: rsnd: rename rsnd_dai_is_clk_master() to rsnd_rdai_is_clk_master()
struct rsnd_dai is called as "rdai", and struct snd_soc_dai is called
as "dai" on this driver. but macro/function have confusable naming.
This patch rename rsnd_dai_is_clk_master() to rsnd_rdai_is_clk_master()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:48 +00:00
Kuninori Morimoto 710d088923 ASoC: rsnd: rename rsnd_dai_get() to rsnd_rdai_get()
struct rsnd_dai is called as "rdai", and struct snd_soc_dai is called
as "dai" on this driver. but macro/function have confusable naming.
This patch rename rsnd_dai_get() to rsnd_rdai_get()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:48 +00:00
Kuninori Morimoto 8564295231 ASoC: rsnd: rsnd_mod controls clock
Current rsnd driver's mod (= ssi/src/dvc) have each own clk,
but, these are needed to start/stop each mod.
This patch adds struct clk in rsnd_mod, and start/stop these
via rsnd_mod_hw_start/stop() macro

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:48 +00:00
Kuninori Morimoto 9d0e202f13 ASoC: rsnd: tidyup rsnd_io_to_xxx() macro declaration position
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:48 +00:00
Kuninori Morimoto 798cbb400a ASoC: rsnd: remove unsed .rate
rsnd_ssi::rate is not used. Let's remove it

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:37:47 +00:00
Bard Liao 45437fa585 ASoC: rt286: set the same format for dac and adc
There is only one I2S I/F, AD/DA path must operate to the same
format.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:16:15 +00:00
Masanari Iida a465122ae3 ASoC: Fix typo in bt-sco.c
This patch fix spelling typo in bt-sco.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:06:24 +00:00
Masanari Iida 70462457ff ALSA: hda - Fix typo in hda_controller.c
This patch fix spelling typo in hda_controller.c.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-15 12:04:21 +01:00
Takashi Iwai ffcd28d88e ALSA: hda - Select INPUT for Realtek HD-audio codec
The commit commit [33f4acd3b214: ALSA: hda - Enable mic mute hotkey
and LEDs for an HP machine] introduced a quirk for a HP machine
involving with the input event handling.  Although the relevant code
is protected via IS_ENABLED(CONFIG_INPUT), this doesn't suffice when
the audio driver is built in while the input is module.

As an easy workaround, this patch forcibly selects CONFIG_INPUT in
Kconfig.  This shouldn't be a practical problem since CONFIG_INPUT is
almost mandatory for all systems.  Also, this allows to remove the
ugly ifdefs in the code.

Fixes: 33f4acd3b2 ('ALSA: hda - Enable mic mute hotkey and LEDs for an HP machine')
Acked-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-15 10:21:50 +01:00
Davidlohr Bueso fd4e8dde42 sound/oss: use current->state helpers
Call __set_current_state() instead of assigning the new state directly.
These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments, keeping
track of who changed the state.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-15 08:32:27 +01:00
David S. Miller 3f3558bb51 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/xen-netfront.c

Minor overlapping changes in xen-netfront.c, mostly to do
with some buffer management changes alongside the split
of stats into TX and RX.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 00:53:17 -05:00
Jie Yang a0a7c48fe1 ASoC: Intel: initial stream_hw_id to invalid value
The stream_hw_id for System stream is 0x0, if we use initial stream_hw_id
value 0, it may return wrong(not committed) stream when calling function
get_stream_by_id() with stream_id=0. Here initial stream_hw_id to invalid
value to fix this issue.

Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 20:22:35 +00:00
Lars-Peter Clausen 0201e50521 ASoC: wm_hubs: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:54:07 +00:00
Lars-Peter Clausen 72718517b4 ASoC: wm_adsp: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:54:04 +00:00
Lars-Peter Clausen ff70508a8a ASoC: wm9713: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:54:01 +00:00
Lars-Peter Clausen 0a3042d783 ASoC: wm9090: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:57 +00:00
Lars-Peter Clausen 8a8a84e6b9 ASoC: wm9081: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:54 +00:00
Lars-Peter Clausen 8643707fb8 ASoC: wm8997: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:51 +00:00
Lars-Peter Clausen 00748490f7 ASoC: wm8996: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:48 +00:00
Lars-Peter Clausen 9887adf1d0 ASoC: wm8995: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:45 +00:00
Lars-Peter Clausen 12e3080c4f ASoC: wm8995: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:43 +00:00
Lars-Peter Clausen 07276572e6 ASoC: wm8993: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:40 +00:00
Lars-Peter Clausen f3b4d68fc2 ASoC: wm8991: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:37 +00:00
Lars-Peter Clausen 68ca2f682e ASoC: wm8990: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:34 +00:00
Lars-Peter Clausen 8b39dd9f08 ASoC: wm8988: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:31 +00:00
Lars-Peter Clausen 6374b19de6 ASoC: wm8962: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:28 +00:00
Lars-Peter Clausen 0e13064d91 ASoC: wm8961: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:25 +00:00
Lars-Peter Clausen 32a4b446c5 ASoC: wm8961: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:22 +00:00
Lars-Peter Clausen 11e5e79af8 ASoC: wm8955: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:19 +00:00
Lars-Peter Clausen 8f13bd4e6c ASoC: wm8904: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:15 +00:00
Lars-Peter Clausen 2ea7a3f354 ASoC: wm8903: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14 19:53:12 +00:00