Commit Graph

432 Commits

Author SHA1 Message Date
Linus Torvalds a867d7349e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull userns vfs updates from Eric Biederman:
 "This tree contains some very long awaited work on generalizing the
  user namespace support for mounting filesystems to include filesystems
  with a backing store.  The real world target is fuse but the goal is
  to update the vfs to allow any filesystem to be supported.  This
  patchset is based on a lot of code review and testing to approach that
  goal.

  While looking at what is needed to support the fuse filesystem it
  became clear that there were things like xattrs for security modules
  that needed special treatment.  That the resolution of those concerns
  would not be fuse specific.  That sorting out these general issues
  made most sense at the generic level, where the right people could be
  drawn into the conversation, and the issues could be solved for
  everyone.

  At a high level what this patchset does a couple of simple things:

   - Add a user namespace owner (s_user_ns) to struct super_block.

   - Teach the vfs to handle filesystem uids and gids not mapping into
     to kuids and kgids and being reported as INVALID_UID and
     INVALID_GID in vfs data structures.

  By assigning a user namespace owner filesystems that are mounted with
  only user namespace privilege can be detected.  This allows security
  modules and the like to know which mounts may not be trusted.  This
  also allows the set of uids and gids that are communicated to the
  filesystem to be capped at the set of kuids and kgids that are in the
  owning user namespace of the filesystem.

  One of the crazier corner casees this handles is the case of inodes
  whose i_uid or i_gid are not mapped into the vfs.  Most of the code
  simply doesn't care but it is easy to confuse the inode writeback path
  so no operation that could cause an inode write-back is permitted for
  such inodes (aka only reads are allowed).

  This set of changes starts out by cleaning up the code paths involved
  in user namespace permirted mounts.  Then when things are clean enough
  adds code that cleanly sets s_user_ns.  Then additional restrictions
  are added that are possible now that the filesystem superblock
  contains owner information.

  These changes should not affect anyone in practice, but there are some
  parts of these restrictions that are changes in behavior.

   - Andy's restriction on suid executables that does not honor the
     suid bit when the path is from another mount namespace (think
     /proc/[pid]/fd/) or when the filesystem was mounted by a less
     privileged user.

   - The replacement of the user namespace implicit setting of MNT_NODEV
     with implicitly setting SB_I_NODEV on the filesystem superblock
     instead.

     Using SB_I_NODEV is a stronger form that happens to make this state
     user invisible.  The user visibility can be managed but it caused
     problems when it was introduced from applications reasonably
     expecting mount flags to be what they were set to.

  There is a little bit of work remaining before it is safe to support
  mounting filesystems with backing store in user namespaces, beyond
  what is in this set of changes.

   - Verifying the mounter has permission to read/write the block device
     during mount.

   - Teaching the integrity modules IMA and EVM to handle filesystems
     mounted with only user namespace root and to reduce trust in their
     security xattrs accordingly.

   - Capturing the mounters credentials and using that for permission
     checks in d_automount and the like.  (Given that overlayfs already
     does this, and we need the work in d_automount it make sense to
     generalize this case).

  Furthermore there are a few changes that are on the wishlist:

   - Get all filesystems supporting posix acls using the generic posix
     acls so that posix_acl_fix_xattr_from_user and
     posix_acl_fix_xattr_to_user may be removed.  [Maintainability]

   - Reducing the permission checks in places such as remount to allow
     the superblock owner to perform them.

   - Allowing the superblock owner to chown files with unmapped uids and
     gids to something that is mapped so the files may be treated
     normally.

  I am not considering even obvious relaxations of permission checks
  until it is clear there are no more corner cases that need to be
  locked down and handled generically.

  Many thanks to Seth Forshee who kept this code alive, and putting up
  with me rewriting substantial portions of what he did to handle more
  corner cases, and for his diligent testing and reviewing of my
  changes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (30 commits)
  fs: Call d_automount with the filesystems creds
  fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns
  evm: Translate user/group ids relative to s_user_ns when computing HMAC
  dquot: For now explicitly don't support filesystems outside of init_user_ns
  quota: Handle quota data stored in s_user_ns in quota_setxquota
  quota: Ensure qids map to the filesystem
  vfs: Don't create inodes with a uid or gid unknown to the vfs
  vfs: Don't modify inodes with a uid or gid unknown to the vfs
  cred: Reject inodes with invalid ids in set_create_file_as()
  fs: Check for invalid i_uid in may_follow_link()
  vfs: Verify acls are valid within superblock's s_user_ns.
  userns: Handle -1 in k[ug]id_has_mapping when !CONFIG_USER_NS
  fs: Refuse uid/gid changes which don't map into s_user_ns
  selinux: Add support for unprivileged mounts from user namespaces
  Smack: Handle labels consistently in untrusted mounts
  Smack: Add support for unprivileged mounts from user namespaces
  fs: Treat foreign mounts as nosuid
  fs: Limit file caps to the user namespace of the super block
  userns: Remove the now unnecessary FS_USERNS_DEV_MOUNT flag
  userns: Remove implicit MNT_NODEV fragility.
  ...
2016-07-29 15:54:19 -07:00
Linus Torvalds 48c4565ed6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
 "Tmpfs readdir throughput regression fix (this cycle) + some -stable
  fodder all over the place.

  One missing bit is Miklos' tonight locks.c fix - NFS folks had already
  grabbed that one by the time I woke up ;-)"

[ The locks.c fix came through the nfsd tree just moments ago ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  namespace: update event counter when umounting a deleted dentry
  9p: use file_dentry()
  ceph: fix d_obtain_alias() misuses
  lockless next_positive()
  libfs.c: new helper - next_positive()
  dcache_{readdir,dir_lseek}(): don't bother with nested ->d_lock
2016-07-01 15:20:11 -07:00
Andrey Ulanov e06b933e6d namespace: update event counter when umounting a deleted dentry
- m_start() in fs/namespace.c expects that ns->event is incremented each
  time a mount added or removed from ns->list.
- umount_tree() removes items from the list but does not increment event
  counter, expecting that it's done before the function is called.
- There are some codepaths that call umount_tree() without updating
  "event" counter. e.g. from __detach_mounts().
- When this happens m_start may reuse a cached mount structure that no
  longer belongs to ns->list (i.e. use after free which usually leads
  to infinite loop).

This change fixes the above problem by incrementing global event counter
before invoking umount_tree().

Change-Id: I622c8e84dcb9fb63542372c5dbf0178ee86bb589
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Ulanov <andreyu@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-30 23:28:30 -04:00
Andy Lutomirski 380cf5ba6b fs: Treat foreign mounts as nosuid
If a process gets access to a mount from a different user
namespace, that process should not be able to take advantage of
setuid files or selinux entrypoints from that filesystem.  Prevent
this by treating mounts from other mount namespaces and those not
owned by current_user_ns() or an ancestor as nosuid.

This will make it safer to allow more complex filesystems to be
mounted in non-root user namespaces.

This does not remove the need for MNT_LOCK_NOSUID.  The setuid,
setgid, and file capability bits can no longer be abused if code in
a user namespace were to clear nosuid on an untrusted filesystem,
but this patch, by itself, is insufficient to protect the system
from abuse of files that, when execed, would increase MAC privilege.

As a more concrete explanation, any task that can manipulate a
vfsmount associated with a given user namespace already has
capabilities in that namespace and all of its descendents.  If they
can cause a malicious setuid, setgid, or file-caps executable to
appear in that mount, then that executable will only allow them to
elevate privileges in exactly the set of namespaces in which they
are already privileges.

On the other hand, if they can cause a malicious executable to
appear with a dangerous MAC label, running it could change the
caller's security context in a way that should not have been
possible, even inside the namespace in which the task is confined.

As a hardening measure, this would have made CVE-2014-5207 much
more difficult to exploit.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-06-24 10:40:41 -05:00
Eric W. Biederman 67690f937c userns: Remove implicit MNT_NODEV fragility.
Replace the implict setting of MNT_NODEV on mounts that happen with
just user namespace permissions with an implicit setting of SB_I_NODEV
in s_iflags.  The visibility of the implicit MNT_NODEV has caused
problems in the past.

With this change the fragile case where an implicit MNT_NODEV needs to
be preserved in do_remount is removed.  Using SB_I_NODEV is much less
fragile as s_iflags are set during the original mount and never
changed.

In do_new_mount with the implicit setting of MNT_NODEV gone, the only
code that can affect mnt_flags is fs_fully_visible so simplify the if
statement and reduce the indentation of the code to make that clear.

Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-06-23 15:47:23 -05:00
Eric W. Biederman a1935c1738 mnt: Simplify mount_too_revealing
Verify all filesystems that we check in mount_too_revealing set
SB_I_NOEXEC and SB_I_NODEV in sb->s_iflags.  That is true for today
and it should remain true in the future.

Remove the now unnecessary checks from mnt_already_visibile that
ensure MNT_LOCK_NOSUID, MNT_LOCK_NOEXEC, and MNT_LOCK_NODEV are
preserved.  Making the code shorter and easier to read.

Relying on SB_I_NOEXEC and SB_I_NODEV instead of the user visible
MNT_NOSUID, MNT_NOEXEC, and MNT_NODEV ensures the many current
systems where proc and sysfs are mounted with "nosuid, nodev, noexec"
and several slightly buggy container applications don't bother to
set those flags continue to work.

Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-06-23 15:41:57 -05:00
Eric W. Biederman a001e74cef mnt: Move the FS_USERNS_MOUNT check into sget_userns
Allowing a filesystem to be mounted by other than root in the initial
user namespace is a filesystem property not a mount namespace property
and as such should be checked in filesystem specific code.  Move the
FS_USERNS_MOUNT test into super.c:sget_userns().

Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-06-23 15:41:55 -05:00
Eric W. Biederman 8654df4e2a mnt: Refactor fs_fully_visible into mount_too_revealing
Replace the call of fs_fully_visible in do_new_mount from before the
new superblock is allocated with a call of mount_too_revealing after
the superblock is allocated.   This winds up being a much better location
for maintainability of the code.

The first change this enables is the replacement of FS_USERNS_VISIBLE
with SB_I_USERNS_VISIBLE.  Moving the flag from struct filesystem_type
to sb_iflags on the superblock.

Unfortunately mount_too_revealing fundamentally needs to touch
mnt_flags adding several MNT_LOCKED_XXX flags at the appropriate
times.  If the mnt_flags did not need to be touched the code
could be easily moved into the filesystem specific mount code.

Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-06-23 15:41:46 -05:00
Eric W. Biederman 695e9df010 mnt: Account for MS_RDONLY in fs_fully_visible
In rare cases it is possible for s_flags & MS_RDONLY to be set but
MNT_READONLY to be clear.  This starting combination can cause
fs_fully_visible to fail to ensure that the new mount is readonly.
Therefore force MNT_LOCK_READONLY in the new mount if MS_RDONLY
is set on the source filesystem of the mount.

In general both MS_RDONLY and MNT_READONLY are set at the same for
mounts so I don't expect any programs to care.  Nor do I expect
MS_RDONLY to be set on proc or sysfs in the initial user namespace,
which further decreases the likelyhood of problems.

Which means this change should only affect system configurations by
paranoid sysadmins who should welcome the additional protection
as it keeps people from wriggling out of their policies.

Cc: stable@vger.kernel.org
Fixes: 8c6cf9cc82 ("mnt: Modify fs_fully_visible to deal with locked ro nodev and atime")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-06-15 06:52:23 -05:00
Eric W. Biederman d71ed6c930 mnt: fs_fully_visible test the proper mount for MNT_LOCKED
MNT_LOCKED implies on a child mount implies the child is locked to the
parent.  So while looping through the children the children should be
tested (not their parent).

Typically an unshare of a mount namespace locks all mounts together
making both the parent and the slave as locked but there are a few
corner cases where other things work.

Cc: stable@vger.kernel.org
Fixes: ceeb0e5d39 ("vfs: Ignore unlocked mounts in fs_fully_visible")
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-06-06 20:52:03 -05:00
Eric W. Biederman 97c1df3e54 mnt: If fs_fully_visible fails call put_filesystem.
Add this trivial missing error handling.

Cc: stable@vger.kernel.org
Fixes: 1b852bceb0 ("mnt: Refactor the logic for mounting sysfs and proc in a user namespace")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-06-06 20:48:31 -05:00
Al Viro 5955102c99 wrappers for ->i_mutex access
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 18:04:28 -05:00
Linus Torvalds 33caf82acf Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
 "All kinds of stuff.  That probably should've been 5 or 6 separate
  branches, but by the time I'd realized how large and mixed that bag
  had become it had been too close to -final to play with rebasing.

  Some fs/namei.c cleanups there, memdup_user_nul() introduction and
  switching open-coded instances, burying long-dead code, whack-a-mole
  of various kinds, several new helpers for ->llseek(), assorted
  cleanups and fixes from various people, etc.

  One piece probably deserves special mention - Neil's
  lookup_one_len_unlocked().  Similar to lookup_one_len(), but gets
  called without ->i_mutex and tries to avoid ever taking it.  That, of
  course, means that it's not useful for any directory modifications,
  but things like getting inode attributes in nfds readdirplus are fine
  with that.  I really should've asked for moratorium on lookup-related
  changes this cycle, but since I hadn't done that early enough...  I
  *am* asking for that for the coming cycle, though - I'm going to try
  and get conversion of i_mutex to rwsem with ->lookup() done under lock
  taken shared.

  There will be a patch closer to the end of the window, along the lines
  of the one Linus had posted last May - mechanical conversion of
  ->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/
  inode_is_locked()/inode_lock_nested().  To quote Linus back then:

    -----
    |    This is an automated patch using
    |
    |        sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/'
    |        sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/'
    |        sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[     ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/'
    |        sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/'
    |        sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/'
    |
    |    with a very few manual fixups
    -----

  I'm going to send that once the ->i_mutex-affecting stuff in -next
  gets mostly merged (or when Linus says he's about to stop taking
  merges)"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  nfsd: don't hold i_mutex over userspace upcalls
  fs:affs:Replace time_t with time64_t
  fs/9p: use fscache mutex rather than spinlock
  proc: add a reschedule point in proc_readfd_common()
  logfs: constify logfs_block_ops structures
  fcntl: allow to set O_DIRECT flag on pipe
  fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE
  fs: xattr: Use kvfree()
  [s390] page_to_phys() always returns a multiple of PAGE_SIZE
  nbd: use ->compat_ioctl()
  fs: use block_device name vsprintf helper
  lib/vsprintf: add %*pg format specifier
  fs: use gendisk->disk_name where possible
  poll: plug an unused argument to do_poll
  amdkfd: don't open-code memdup_user()
  cdrom: don't open-code memdup_user()
  rsxx: don't open-code memdup_user()
  mtip32xx: don't open-code memdup_user()
  [um] mconsole: don't open-code memdup_user_nul()
  [um] hostaudio: don't open-code memdup_user()
  ...
2016-01-12 17:11:47 -08:00
Al Viro b40ef8696f saner calling conventions for copy_mount_options()
let it just return NULL, pointer to kernel copy or ERR_PTR().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04 10:28:32 -05:00
Yaowei Bai 25ab4c9b1c fs/namespace.c: path_is_under can be boolean
This patch makes path_is_under return bool to improve
readability due to this particular function only using either
one or zero as its return value.

No functional change.

Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-06 21:17:13 -05:00
Eric W. Biederman 95ace75414 locks: Don't allow mounts in user namespaces to enable mandatory locking
Since no one uses mandatory locking and files with mandatory locks can
cause problems don't allow them in user namespaces.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-11-16 10:01:34 -05:00
Jeff Layton 9e8925b67a locks: Allow disabling mandatory locking at compile time
Mandatory locking appears to be almost unused and buggy and there
appears no real interest in doing anything with it.  Since effectively
no one uses the code and since the code is buggy let's allow it to be
disabled at compile time.  I would just suggest removing the code but
undoubtedly that will break some piece of userspace code somewhere.

For the distributions that don't care about this piece of code
this gives a nice starting point to make mandatory locking go away.

Cc: Benjamin Coddington <bcodding@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jeff Layton <jeff.layton@primarydata.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-11-16 09:49:34 -05:00
Linus Torvalds 73b6fa8e49 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace updates from Eric Biederman:
 "This finishes up the changes to ensure proc and sysfs do not start
  implementing executable files, as the there are application today that
  are only secure because such files do not exist.

  It akso fixes a long standing misfeature of /proc/<pid>/mountinfo that
  did not show the proper source for files bind mounted from
  /proc/<pid>/ns/*.

  It also straightens out the handling of clone flags related to user
  namespaces, fixing an unnecessary failure of unshare(CLONE_NEWUSER)
  when files such as /proc/<pid>/environ are read while <pid> is calling
  unshare.  This winds up fixing a minor bug in unshare flag handling
  that dates back to the first version of unshare in the kernel.

  Finally, this fixes a minor regression caused by the introduction of
  sysfs_create_mount_point, which broke someone's in house application,
  by restoring the size of /sys/fs/cgroup to 0 bytes.  Apparently that
  application uses the directory size to determine if a tmpfs is mounted
  on /sys/fs/cgroup.

  The bind mount escape fixes are present in Al Viros for-next branch.
  and I expect them to come from there.  The bind mount escape is the
  last of the user namespace related security bugs that I am aware of"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  fs: Set the size of empty dirs to 0.
  userns,pidns: Force thread group sharing, not signal handler sharing.
  unshare: Unsharing a thread does not require unsharing a vm
  nsfs: Add a show_path method to fix mountinfo
  mnt: fs_fully_visible enforce noexec and nosuid  if !SB_I_NOEXEC
  vfs: Commit to never having exectuables on proc and sysfs.
2015-09-01 16:13:25 -07:00
Eric W. Biederman fe78fcc85a mnt: In detach_mounts detach the appropriate unmounted mount
The handling of in detach_mounts of unmounted but connected mounts is
buggy and can lead to an infinite loop.

Correct the handling of unmounted mounts in detach_mount.  When the
mountpoint of an unmounted but connected mount is connected to a
dentry, and that dentry is deleted we need to disconnect that mount
from the parent mount and the deleted dentry.

Nothing changes for the unmounted and connected children.  They can be
safely ignored.

Cc: stable@vger.kernel.org
Fixes: ce07d891a0 mnt: Honor MNT_LOCKED when detaching mounts
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-07-23 11:31:15 -05:00
Eric W. Biederman f2d0a123bc mnt: Clarify and correct the disconnect logic in umount_tree
rmdir mntpoint will result in an infinite loop when there is
a mount locked on the mountpoint in another mount namespace.

This is because the logic to test to see if a mount should
be disconnected in umount_tree is buggy.

Move the logic to decide if a mount should remain connected to
it's mountpoint into it's own function disconnect_mount so that
clarity of expression instead of terseness of expression becomes
a virtue.

When the conditions where it is invalid to leave a mount connected
are first ruled out, the logic for deciding if a mount should
be disconnected becomes much clearer and simpler.

Fixes: e0c9c0afd2 mnt: Update detach_mounts to leave mounts connected
Fixes: ce07d891a0 mnt: Honor MNT_LOCKED when detaching mounts
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-07-22 20:33:27 -05:00
Eric W. Biederman 77b1a97d21 mnt: fs_fully_visible enforce noexec and nosuid if !SB_I_NOEXEC
The filesystems proc and sysfs do not have executable files do not
have exectuable files today and portions of userspace break if we do
enforce nosuid and noexec consistency of nosuid and noexec flags
between previous mounts and new mounts of proc and sysfs.

Add the code to enforce consistency of the nosuid and noexec flags,
and use the presence of SB_I_NOEXEC to signal that there is no need to
bother.

This results in a completely userspace invisible change that makes it
clear fs_fully_visible can only skip the enforcement of noexec and
nosuid because it is known the filesystems in question do not support
executables.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-07-10 10:41:13 -05:00
Linus Torvalds 0cbee99269 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace updates from Eric Biederman:
 "Long ago and far away when user namespaces where young it was realized
  that allowing fresh mounts of proc and sysfs with only user namespace
  permissions could violate the basic rule that only root gets to decide
  if proc or sysfs should be mounted at all.

  Some hacks were put in place to reduce the worst of the damage could
  be done, and the common sense rule was adopted that fresh mounts of
  proc and sysfs should allow no more than bind mounts of proc and
  sysfs.  Unfortunately that rule has not been fully enforced.

  There are two kinds of gaps in that enforcement.  Only filesystems
  mounted on empty directories of proc and sysfs should be ignored but
  the test for empty directories was insufficient.  So in my tree
  directories on proc, sysctl and sysfs that will always be empty are
  created specially.  Every other technique is imperfect as an ordinary
  directory can have entries added even after a readdir returns and
  shows that the directory is empty.  Special creation of directories
  for mount points makes the code in the kernel a smidge clearer about
  it's purpose.  I asked container developers from the various container
  projects to help test this and no holes were found in the set of mount
  points on proc and sysfs that are created specially.

  This set of changes also starts enforcing the mount flags of fresh
  mounts of proc and sysfs are consistent with the existing mount of
  proc and sysfs.  I expected this to be the boring part of the work but
  unfortunately unprivileged userspace winds up mounting fresh copies of
  proc and sysfs with noexec and nosuid clear when root set those flags
  on the previous mount of proc and sysfs.  So for now only the atime,
  read-only and nodev attributes which userspace happens to keep
  consistent are enforced.  Dealing with the noexec and nosuid
  attributes remains for another time.

  This set of changes also addresses an issue with how open file
  descriptors from /proc/<pid>/ns/* are displayed.  Recently readlink of
  /proc/<pid>/fd has been triggering a WARN_ON that has not been
  meaningful since it was added (as all of the code in the kernel was
  converted) and is not now actively wrong.

  There is also a short list of issues that have not been fixed yet that
  I will mention briefly.

  It is possible to rename a directory from below to above a bind mount.
  At which point any directory pointers below the renamed directory can
  be walked up to the root directory of the filesystem.  With user
  namespaces enabled a bind mount of the bind mount can be created
  allowing the user to pick a directory whose children they can rename
  to outside of the bind mount.  This is challenging to fix and doubly
  so because all obvious solutions must touch code that is in the
  performance part of pathname resolution.

  As mentioned above there is also a question of how to ensure that
  developers by accident or with purpose do not introduce exectuable
  files on sysfs and proc and in doing so introduce security regressions
  in the current userspace that will not be immediately obvious and as
  such are likely to require breaking userspace in painful ways once
  they are recognized"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  vfs: Remove incorrect debugging WARN in prepend_path
  mnt: Update fs_fully_visible to test for permanently empty directories
  sysfs: Create mountpoints with sysfs_create_mount_point
  sysfs: Add support for permanently empty directories to serve as mount points.
  kernfs: Add support for always empty directories.
  proc: Allow creating permanently empty directories that serve as mount points
  sysctl: Allow creating permanently empty directories that serve as mountpoints.
  fs: Add helper functions for permanently empty directories.
  vfs: Ignore unlocked mounts in fs_fully_visible
  mnt: Modify fs_fully_visible to deal with locked ro nodev and atime
  mnt: Refactor the logic for mounting sysfs and proc in a user namespace
2015-07-03 15:20:57 -07:00
Eric W. Biederman 7236c85e1b mnt: Update fs_fully_visible to test for permanently empty directories
fs_fully_visible attempts to make fresh mounts of proc and sysfs give
the mounter no more access to proc and sysfs than if they could have
by creating a bind mount.  One aspect of proc and sysfs that makes
this particularly tricky is that there are other filesystems that
typically mount on top of proc and sysfs.  As those filesystems are
mounted on empty directories in practice it is safe to ignore them.
However testing to ensure filesystems are mounted on empty directories
has not been something the in kernel data structures have supported so
the current test for an empty directory which checks to see
if nlink <= 2 is a bit lacking.

proc and sysfs have recently been modified to use the new empty_dir
infrastructure to create all of their dedicated mount points.  Instead
of testing for S_ISDIR(inode->i_mode) && i_nlink <= 2 to see if a
directory is empty, test for is_empty_dir_inode(inode).  That small
change guaranteess mounts found on proc and sysfs really are safe to
ignore, because the directories are not only empty but nothing can
ever be added to them.  This guarantees there is nothing to worry
about when mounting proc and sysfs.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-07-01 10:36:49 -05:00
Eric W. Biederman ceeb0e5d39 vfs: Ignore unlocked mounts in fs_fully_visible
Limit the mounts fs_fully_visible considers to locked mounts.
Unlocked can always be unmounted so considering them adds hassle
but no security benefit.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-07-01 10:36:35 -05:00
Yann Droneaud ede1bf0dcf fs: use seq_open_private() for proc_mounts
A patchset to remove support for passing pre-allocated struct seq_file to
seq_open().  Such feature is undocumented and prone to error.

In particular, if seq_release() is used in release handler, it will
kfree() a pointer which was not allocated by seq_open().

So this patchset drops support for pre-allocated struct seq_file: it's
only of use in proc_namespace.c and can be easily replaced by using
seq_open_private()/seq_release_private().

Additionally, it documents the use of file->private_data to hold pointer
to struct seq_file by seq_open().

This patch (of 3):

Since patch described below, from v2.6.15-rc1, seq_open() could use a
struct seq_file already allocated by the caller if the pointer to the
structure is stored in file->private_data before calling the function.

    Commit 1abe77b0fc
    Author: Al Viro <viro@zeniv.linux.org.uk>
    Date:   Mon Nov 7 17:15:34 2005 -0500

        [PATCH] allow callers of seq_open do allocation themselves

        Allow caller of seq_open() to kmalloc() seq_file + whatever else they
        want and set ->private_data to it.  seq_open() will then abstain from
        doing allocation itself.

Such behavior is only used by mounts_open_common().

In order to drop support for such uncommon feature, proc_mounts is
converted to use seq_open_private(), which take care of allocating the
proc_mounts structure, making it available through ->private in struct
seq_file.

Conversely, proc_mounts is converted to use seq_release_private(), in
order to release the private structure allocated by seq_open_private().

Then, ->private is used directly instead of proc_mounts() macro to access
to the proc_mounts structure.

Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 19:44:56 -07:00
Eric W. Biederman 8c6cf9cc82 mnt: Modify fs_fully_visible to deal with locked ro nodev and atime
Ignore an existing mount if the locked readonly, nodev or atime
attributes are less permissive than the desired attributes
of the new mount.

On success ensure the new mount locks all of the same readonly, nodev and
atime attributes as the old mount.

The nosuid and noexec attributes are not checked here as this change
is destined for stable and enforcing those attributes causes a
regression in lxc and libvirt-lxc where those applications will not
start and there are no known executables on sysfs or proc and no known
way to create exectuables without code modifications

Cc: stable@vger.kernel.org
Fixes: e51db73532 ("userns: Better restrictions on when proc and sysfs can be mounted")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-06-04 10:29:25 -05:00
Eric W. Biederman 1b852bceb0 mnt: Refactor the logic for mounting sysfs and proc in a user namespace
Fresh mounts of proc and sysfs are a very special case that works very
much like a bind mount.  Unfortunately the current structure can not
preserve the MNT_LOCK... mount flags.  Therefore refactor the logic
into a form that can be modified to preserve those lock bits.

Add a new filesystem flag FS_USERNS_VISIBLE that requires some mount
of the filesystem be fully visible in the current mount namespace,
before the filesystem may be mounted.

Move the logic for calling fs_fully_visible from proc and sysfs into
fs/namespace.c where it has greater access to mount namespace state.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-05-13 21:44:11 -05:00
Al Viro 294d71ff2f new helper: __legitimize_mnt()
same as legitimize_mnt(), except that it does *not* drop and regain
rcu_read_lock; return values are
0  =>  grabbed a reference, we are fine
1  =>  failed, just go away
-1 =>  failed, go away and mntput(bastard) when outside of rcu_read_lock

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-11 08:13:14 -04:00
Eric W. Biederman 7e96c1b0e0 mnt: Fix fs_fully_visible to verify the root directory is visible
This fixes a dumb bug in fs_fully_visible that allows proc or sys to
be mounted if there is a bind mount of part of /proc/ or /sys/ visible.

Cc: stable@vger.kernel.org
Reported-by: Eric Windisch <ewindisch@docker.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-05-09 11:55:50 -05:00
Eric W. Biederman e0c9c0afd2 mnt: Update detach_mounts to leave mounts connected
Now that it is possible to lazily unmount an entire mount tree and
leave the individual mounts connected to each other add a new flag
UMOUNT_CONNECTED to umount_tree to force this behavior and use
this flag in detach_mounts.

This closes a bug where the deletion of a file or directory could
trigger an unmount and reveal data under a mount point.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-09 11:39:57 -05:00
Eric W. Biederman f53e579751 mnt: Fix the error check in __detach_mounts
lookup_mountpoint can return either NULL or an error value.
Update the test in __detach_mounts to test for an error value
to avoid pathological cases causing a NULL pointer dereferences.

The callers of __detach_mounts should prevent it from ever being
called on an unlinked dentry but don't take any chances.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-09 11:39:56 -05:00
Eric W. Biederman ce07d891a0 mnt: Honor MNT_LOCKED when detaching mounts
Modify umount(MNT_DETACH) to keep mounts in the hash table that are
locked to their parent mounts, when the parent is lazily unmounted.

In mntput_no_expire detach the children from the hash table, depending
on mnt_pin_kill in cleanup_mnt to decrement the mnt_count of the children.

In __detach_mounts if there are any mounts that have been unmounted
but still are on the list of mounts of a mountpoint, remove their
children from the mount hash table and those children to the unmounted
list so they won't linger potentially indefinitely waiting for their
final mntput, now that the mounts serve no purpose.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-09 11:39:55 -05:00
Eric W. Biederman 6a46c5735c mnt: Factor umount_mnt from umount_tree
For future use factor out a function umount_mnt from umount_tree.
This function unhashes a mount and remembers where the mount
was mounted so that eventually when the code makes it to a
sleeping context the mountpoint can be dput.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-09 11:39:54 -05:00
Eric W. Biederman 7bdb11de8e mnt: Factor out unhash_mnt from detach_mnt and umount_tree
Create a function unhash_mnt that contains the common code between
detach_mnt and umount_tree, and use unhash_mnt in place of the common
code.  This add a unncessary list_del_init(mnt->mnt_child) into
umount_tree but given that mnt_child is already empty this extra
line is a noop.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-09 11:39:54 -05:00
Eric W. Biederman cd4a40174b mnt: Fail collect_mounts when applied to unmounted mounts
The only users of collect_mounts are in audit_tree.c

In audit_trim_trees and audit_add_tree_rule the path passed into
collect_mounts is generated from kern_path passed an audit_tree
pathname which is guaranteed to be an absolute path.   In those cases
collect_mounts is obviously intended to work on mounted paths and
if a race results in paths that are unmounted when collect_mounts
it is reasonable to fail early.

The paths passed into audit_tag_tree don't have the absolute path
check.  But are used to play with fsnotify and otherwise interact with
the audit_trees, so again operating only on mounted paths appears
reasonable.

Avoid having to worry about what happens when we try and audit
unmounted filesystems by restricting collect_mounts to mounts
that appear in the mount tree.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-09 11:38:31 -05:00
Eric W. Biederman 5d88457eb5 mnt: On an unmount propagate clearing of MNT_LOCKED
A prerequisite of calling umount_tree is that the point where the tree
is mounted at is valid to unmount.

If we are propagating the effect of the unmount clear MNT_LOCKED in
every instance where the same filesystem is mounted on the same
mountpoint in the mount tree, as we know (by virtue of the fact
that umount_tree was called) that it is safe to reveal what
is at that mountpoint.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-02 20:34:19 -05:00
Eric W. Biederman 411a938b5a mnt: Delay removal from the mount hash.
- Modify __lookup_mnt_hash_last to ignore mounts that have MNT_UMOUNTED set.
- Don't remove mounts from the mount hash table in propogate_umount
- Don't remove mounts from the mount hash table in umount_tree before
  the entire list of mounts to be umounted is selected.
- Remove mounts from the mount hash table as the last thing that
  happens in the case where a mount has a parent in umount_tree.
  Mounts without parents are not hashed (by definition).

This paves the way for delaying removal from the mount hash table even
farther and fixing the MNT_LOCKED vs MNT_DETACH issue.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-02 20:34:19 -05:00
Eric W. Biederman 590ce4bcbf mnt: Add MNT_UMOUNT flag
In some instances it is necessary to know if the the unmounting
process has begun on a mount.  Add MNT_UMOUNT to make that reliably
testable.

This fix gets used in fixing locked mounts in MNT_DETACH

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-02 20:34:18 -05:00
Eric W. Biederman c003b26ff9 mnt: In umount_tree reuse mnt_list instead of mnt_hash
umount_tree builds a list of mounts that need to be unmounted.
Utilize mnt_list for this purpose instead of mnt_hash.  This begins to
allow keeping a mount on the mnt_hash after it is unmounted, which is
necessary for a properly functioning MNT_LOCKED implementation.

The fact that mnt_list is an ordinary list makding available list_move
is nice bonus.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-02 20:34:18 -05:00
Eric W. Biederman 8318e667f1 mnt: Don't propagate umounts in __detach_mounts
Invoking mount propagation from __detach_mounts is inefficient and
wrong.

It is inefficient because __detach_mounts already walks the list of
mounts that where something needs to be done, and mount propagation
walks some subset of those mounts again.

It is actively wrong because if the dentry that is passed to
__detach_mounts is not part of the path to a mount that mount should
not be affected.

change_mnt_propagation(p,MS_PRIVATE) modifies the mount propagation
tree of a master mount so it's slaves are connected to another master
if possible.  Which means even removing a mount from the middle of a
mount tree with __detach_mounts will not deprive any mount propagated
mount events.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-02 20:34:17 -05:00
Eric W. Biederman e819f15210 mnt: Improve the umount_tree flags
- Remove the unneeded declaration from pnode.h
- Mark umount_tree static as it has no callers outside of namespace.c
- Define an enumeration of umount_tree's flags.
- Pass umount_tree's flags in by name

This removes the magic numbers 0, 1 and 2 making the code a little
clearer and makes it possible for there to be lazy unmounts that don't
propagate.  Which is what __detach_mounts actually wants for example.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-02 20:34:17 -05:00
Eric W. Biederman a3b3c5627c mnt: Use hlist_move_list in namespace_unlock
Small cleanup to make the code more readable and maintainable.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
2015-04-02 20:33:53 -05:00
David Howells e36cb0b89c VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)
Convert the following where appropriate:

 (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).

 (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).

 (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry).  This is actually more
     complicated than it appears as some calls should be converted to
     d_can_lookup() instead.  The difference is whether the directory in
     question is a real dir with a ->lookup op or whether it's a fake dir with
     a ->d_automount op.

In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).

Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer.  In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.

However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.

There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE.  Strictly, this was
intended for special directory entry types that don't have attached inodes.

The following perl+coccinelle script was used:

use strict;

my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
    die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
    print "No matches\n";
    exit(0);
}

my @cocci = (
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISLNK(E->d_inode->i_mode)',
    '+ d_is_symlink(E)',
    '',
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISDIR(E->d_inode->i_mode)',
    '+ d_is_dir(E)',
    '',
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISREG(E->d_inode->i_mode)',
    '+ d_is_reg(E)' );

my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);

foreach my $file (@callers) {
    chomp $file;
    print "Processing ", $file, "\n";
    system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
	die "spatch failed";
}

[AV: overlayfs parts skipped]

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-22 11:38:41 -05:00
Linus Torvalds 50652963ea Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc VFS updates from Al Viro:
 "This cycle a lot of stuff sits on topical branches, so I'll be sending
  more or less one pull request per branch.

  This is the first pile; more to follow in a few.  In this one are
  several misc commits from early in the cycle (before I went for
  separate branches), plus the rework of mntput/dput ordering on umount,
  switching to use of fs_pin instead of convoluted games in
  namespace_unlock()"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  switch the IO-triggering parts of umount to fs_pin
  new fs_pin killing logics
  allow attaching fs_pin to a group not associated with some superblock
  get rid of the second argument of acct_kill()
  take count and rcu_head out of fs_pin
  dcache: let the dentry count go down to zero without taking d_lock
  pull bumping refcount into ->kill()
  kill pin_put()
  mode_t whack-a-mole: chelsio
  file->f_path.dentry is pinned down for as long as the file is open...
  get rid of lustre_dump_dentry()
  gut proc_register() a bit
  kill d_validate()
  ncpfs: get rid of d_validate() nonsense
  selinuxfs: don't open-code d_genocide()
2015-02-17 14:56:45 -08:00
Andrzej Hajda fcc139ae22 fs/namespace: convert devname allocation to kstrdup_const
VFS frequently performs duplication of strings located in read-only memory
section.  Replacing kstrdup by kstrdup_const allows to avoid such
operations.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 21:21:36 -08:00
Al Viro 87b95ce096 switch the IO-triggering parts of umount to fs_pin
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 23:17:29 -05:00
Eric W. Biederman c297abfdf1 mnt: Fix a memory stomp in umount
While reviewing the code of umount_tree I realized that when we append
to a preexisting unmounted list we do not change pprev of the former
first item in the list.

Which means later in namespace_unlock hlist_del_init(&mnt->mnt_hash) on
the former first item of the list will stomp unmounted.first leaving
it set to some random mount point which we are likely to free soon.

This isn't likely to hit, but if it does I don't know how anyone could
track it down.

[ This happened because we don't have all the same operations for
  hlist's as we do for normal doubly-linked lists. In particular,
  list_splice() is easy on our standard doubly-linked lists, while
  hlist_splice() doesn't exist and needs both start/end entries of the
  hlist.  And commit 38129a13e6 incorrectly open-coded that missing
  hlist_splice().

  We should think about making these kinds of "mindless" conversions
  easier to get right by adding the missing hlist helpers   - Linus ]

Fixes: 38129a13e6 switch mnt_hash to hlist
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-18 11:22:02 -08:00
Linus Torvalds 87c31b39ab Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace related fixes from Eric Biederman:
 "As these are bug fixes almost all of thes changes are marked for
  backporting to stable.

  The first change (implicitly adding MNT_NODEV on remount) addresses a
  regression that was created when security issues with unprivileged
  remount were closed.  I go on to update the remount test to make it
  easy to detect if this issue reoccurs.

  Then there are a handful of mount and umount related fixes.

  Then half of the changes deal with the a recently discovered design
  bug in the permission checks of gid_map.  Unix since the beginning has
  allowed setting group permissions on files to less than the user and
  other permissions (aka ---rwx---rwx).  As the unix permission checks
  stop as soon as a group matches, and setgroups allows setting groups
  that can not later be dropped, results in a situtation where it is
  possible to legitimately use a group to assign fewer privileges to a
  process.  Which means dropping a group can increase a processes
  privileges.

  The fix I have adopted is that gid_map is now no longer writable
  without privilege unless the new file /proc/self/setgroups has been
  set to permanently disable setgroups.

  The bulk of user namespace using applications even the applications
  using applications using user namespaces without privilege remain
  unaffected by this change.  Unfortunately this ix breaks a couple user
  space applications, that were relying on the problematic behavior (one
  of which was tools/selftests/mount/unprivileged-remount-test.c).

  To hopefully prevent needing a regression fix on top of my security
  fix I rounded folks who work with the container implementations mostly
  like to be affected and encouraged them to test the changes.

    > So far nothing broke on my libvirt-lxc test bed. :-)
    > Tested with openSUSE 13.2 and libvirt 1.2.9.
    > Tested-by: Richard Weinberger <richard@nod.at>

    > Tested on Fedora20 with libvirt 1.2.11, works fine.
    > Tested-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>

    > Ok, thanks - yes, unprivileged lxc is working fine with your kernels.
    > Just to be sure I was testing the right thing I also tested using
    > my unprivileged nsexec testcases, and they failed on setgroup/setgid
    > as now expected, and succeeded there without your patches.
    > Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com>

    > I tested this with Sandstorm.  It breaks as is and it works if I add
    > the setgroups thing.
    > Tested-by: Andy Lutomirski <luto@amacapital.net> # breaks things as designed :("

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  userns: Unbreak the unprivileged remount tests
  userns; Correct the comment in map_write
  userns: Allow setting gid_maps without privilege when setgroups is disabled
  userns: Add a knob to disable setgroups on a per user namespace basis
  userns: Rename id_map_mutex to userns_state_mutex
  userns: Only allow the creator of the userns unprivileged mappings
  userns: Check euid no fsuid when establishing an unprivileged uid mapping
  userns: Don't allow unprivileged creation of gid mappings
  userns: Don't allow setgroups until a gid mapping has been setablished
  userns: Document what the invariant required for safe unprivileged mappings.
  groups: Consolidate the setgroups permission checks
  mnt: Clear mnt_expire during pivot_root
  mnt: Carefully set CL_UNPRIVILEGED in clone_mnt
  mnt: Move the clear of MNT_LOCKED from copy_tree to it's callers.
  umount: Do not allow unmounting rootfs.
  umount: Disallow unprivileged mount force
  mnt: Update unprivileged remount test
  mnt: Implicitly add MNT_NODEV on remount when it was implicitly added by mount
2014-12-17 12:31:40 -08:00
Al Viro e149ed2b80 take the targets of /proc/*/ns/* symlinks to separate fs
New pseudo-filesystem: nsfs.  Targets of /proc/*/ns/* live there now.
It's not mountable (not even registered, so it's not in /proc/filesystems,
etc.).  Files on it *are* bindable - we explicitly permit that in do_loopback().

This stuff lives in fs/nsfs.c now; proc_ns_fget() moved there as well.
get_proc_ns() is a macro now (it's simply returning ->i_private; would
have been an inline, if not for header ordering headache).
proc_ns_inode() is an ex-parrot.  The interface used in procfs is
ns_get_path(path, task, ops) and ns_get_name(buf, size, task, ops).

Dentries and inodes are never hashed; a non-counting reference to dentry
is stashed in ns_common (removed by ->d_prune()) and reused by ns_get_path()
if present.  See ns_get_path()/ns_prune_dentry/nsfs_evict() for details
of that mechanism.

As the result, proc_ns_follow_link() has stopped poking in nd->path.mnt;
it does nd_jump_link() on a consistent <vfsmount,dentry> pair it gets
from ns_get_path().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-10 21:30:20 -05:00
Al Viro f77c80142e bury struct proc_ns in fs/proc
a) make get_proc_ns() return a pointer to struct ns_common
b) mirror ns_ops in dentry->d_fsdata of ns dentries, so that
is_mnt_ns_file() could get away with fewer dereferences.

That way struct proc_ns becomes invisible outside of fs/proc/*.c

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-04 14:34:54 -05:00