Commit Graph

5 Commits

Author SHA1 Message Date
Jean-Nicolas Graux c22df08c7f pinctrl/nomadik: support other alternate-C functions
Upgrade nomadik pinctrl driver to enable selection of other
alternate-C[1-4] functions on some specific ux500 SoC pins.
Handling of those functions is done thanks to PRCM GPIOCR
registers. This was previously managed in PRCMU driver and
it was not really convenient. Idea is to provide a common
way to control all alternate functions.

Note that this improvement does not support the old-fashioned way
used to control nomadik pins, namely the "nmk_config_pin()" function
and its derivatives.

Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@stericsson.com>
Reviewed-by: Philippe Langlais <philippe.langlais@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-10 08:36:59 +02:00
Linus Walleij f79c5ed9da pinctrl/nomadik: add STn8815 ASIC support
This adds support for the STN8815 ASIC for the Nomadik pin
controller.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-03 13:21:37 +02:00
Patrice Chotard 45a1b53195 pinctrl/nomadik: add ASIC DB8450 pinctrl driver
This implements a subdriver for the DB8540 ASIC for the
Nomadik pin controller.

Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-03 13:21:37 +02:00
Linus Walleij dbfe8ca259 pinctrl/nomadik: implement pin multiplexing
Implements basic pinmux for the Nomadik pin controller.

The plan is to split the existing singular pin config interface
nmk_config_pin(), nmk_config_pins(), that will configure muxing
and other settings at the same time, into two interfaces
by splitting the code in pinmux and pinctrl and eventually
deleting the old interface and its helper functions when all
users are gone.

nmk_gpio_set_mode() and nmk_gpio_get_mode() are two older
interfaces for just configuring muxing/altfunctions that
will also be replaced in the end.

We take some extra care to handle the glitch-avoidance here,
but it is simpler now since there is only one altsetting per
pingroup so we know immediately if we need to avoid altfunc
C glitches for a certain group.

As part of the makeover implement the .request() and .free()
calls on the GPIO chips and have them call back into the
pinctrl layer to reserve GPIOs.

ChangeLog v1->v2:
- Rebased on pinctrl-mergebase-20120418 so we get the latest
  driver infrastructure where function count is done by a fixed
  value and we can drop a few range checks since this is now
  handled by the core.
- Include a GPIO muxing hunk erroneously part of the pin config
  patch.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11 11:14:16 +02:00
Linus Walleij e98ea774c8 pinctrl/nomadik: basic Nomadik pinctrl interface
This adds a scratch pin control interface to the Nomadik pinctrl
driver, and defines the pins and groups in the DB8500 ASIC. We
define GPIO ranges to cover the pins exposed. The DB8500 has
more pins than this but we restrict the driver to the pins that
can be controlled from the combined GPIO and pin control hardware
to begin with.

ChangeLog v1->v2:
- Base on the latest pinctrl development from
  pinctrl-mergebase-20120418 so we can get rid of legacy
  group count mechanism. Also drop the range checks for group
  index, this is handled by the core now.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11 11:14:14 +02:00