Commit Graph

3529 Commits

Author SHA1 Message Date
Jacopo Mondi b9ddd50911 iio: adc: max9611: Fix temperature reading in probe
The max9611 driver reads the die temperature at probe time to validate
the communication channel. Use the actual read value to perform the test
instead of the read function return value, which was mistakenly used so
far.

The temperature reading test was only successful because the 0 return
value is in the range of supported temperatures.

Fixes: 69780a3bbc ("iio: adc: Add Maxim max9611 ADC driver")
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-08-05 17:42:24 +01:00
Nuno Sá 82a5008a34 iio: frequency: adf4371: Fix output frequency setting
The fract1 word was not being properly programmed on the device leading
to wrong output frequencies.

Fixes: 7f699bd149 (iio: frequency: adf4371: Add support for ADF4371 PLL)
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Stefan Popa <stefan.popa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-08-05 17:38:33 +01:00
Greg Kroah-Hartman 09f6109ff4 First set of IIO fixes in the 5.3 cycle.
* cros_ec_accel_legacy
   - Fix a false double entry for channel scale as both per channel
     and shared.
 * gyro_adc
   - Fix uninitialized return code that got detected by GCC 9.0 having
     be previously missed.
 * ingenic_adc
   - Set the clock divider on probe to avoid an issue seen with false
     button press detections on JZ4725B SoCs.
 * max9611
   - Backwards parameters in GENMASK.
 * mpu6050
   - Enforce the fact only certain scan modes are actually possible.
 
 One counter fix also picked up for William,
 
 * generic-counter.rst
   - Fix some references.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl09YggRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Fohy7w/9FONFhav8pCKtDLi3cq94tJwG0TbZmIWU
 gR9wRLLhYUC21qfjlrhb+RE3GHslxYXxgsCRlFGOC12Q/UjAZ+HZPqat4nIAuIAp
 AXzHUc97aksiJE5wTf+d6IxkAAWV8DzcuBsIJw1/sp5P+Y2PB9J8DIemyP7J3LJz
 njyRfSZBVV42zT1h80oPnNQ8w5LB38B2QiVIHp1pDxiV7+EuFniLlR51ziOuWRcv
 Ax41fdLO/C3+Ls0pPacCLOODPrQf6BacOC9TzVK9gq9uPpMJDNGeEGLokPexEmH/
 qT12UInLMd7QQr6ZRJH4ST5VLHDAgplePFR4tULa2N56kWjL+r3fP1GsOSrA6K8w
 jrtDQZnWBoPu3G77MhDX2nCmZzDbn8svKJgXcGOaaYdX/aVAo7eydiBBsDJE1ZgD
 F6RBkIcj2pZG6tQi0nq859rS7if+TL7oKnqR2rBkkR2UjhTroaDslR61L8jKwkto
 c+lwaNTS6eS8zH1DU1uW1I97iTh6DS9xhEAA8pciG/Ezm9ZRbvU3onydO1ORF4se
 yAwfDx1tJ2ZbojR2amTWrzPIqNm4gmO1QnsR1DYUeCcDNNOYpnOxQgyL/ZqsyWUi
 AjUlvlZ05MQFrsdFe/BOM8tmo6AhG6whvNsDhEqmUpg23TbJF1MxmAXGwbdpYrTv
 Ud6HuUPuEaQ=
 =WQ8k
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-5.3a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes in the 5.3 cycle.

* cros_ec_accel_legacy
  - Fix a false double entry for channel scale as both per channel
    and shared.
* gyro_adc
  - Fix uninitialized return code that got detected by GCC 9.0 having
    be previously missed.
* ingenic_adc
  - Set the clock divider on probe to avoid an issue seen with false
    button press detections on JZ4725B SoCs.
* max9611
  - Backwards parameters in GENMASK.
* mpu6050
  - Enforce the fact only certain scan modes are actually possible.

One counter fix also picked up for William,

* generic-counter.rst
  - Fix some references.

* tag 'iio-fixes-for-5.3a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: adc: gyroadc: fix uninitialized return code
  docs: generic-counter.rst: fix broken references for ABI file
  iio: imu: mpu6050: add missing available scan masks
  iio: cros_ec_accel_legacy: Fix incorrect channel setting
  IIO: Ingenic JZ47xx: Set clock divider on probe
  iio: adc: max9611: Fix misuse of GENMASK macro
2019-07-28 11:07:26 +02:00
Arnd Bergmann 90c6260c19 iio: adc: gyroadc: fix uninitialized return code
gcc-9 complains about a blatant uninitialized variable use that
all earlier compiler versions missed:

drivers/iio/adc/rcar-gyroadc.c:510:5: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized]

Return -EINVAL instead here and a few lines above it where
we accidentally return 0 on failure.

Cc: stable@vger.kernel.org
Fixes: 059c53b323 ("iio: adc: Add Renesas GyroADC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27 21:56:59 +01:00
Jean-Baptiste Maneyrol 1244a72057 iio: imu: mpu6050: add missing available scan masks
Driver only supports 3-axis gyro and/or 3-axis accel.
For icm20602, temp data is mandatory for all configurations.

Fix all single and double axis configurations (almost never used) and more
importantly fix 3-axis gyro and 6-axis accel+gyro buffer on icm20602 when
temp data is not enabled.

Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Fixes: 1615fe41a1 ("iio: imu: mpu6050: Fix FIFO layout for ICM20602")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-14 18:19:23 +01:00
Gwendal Grignou 6cdff99c9f iio: cros_ec_accel_legacy: Fix incorrect channel setting
INFO_SCALE is set both for each channel and all channels.
iio is using all channel setting, so the error was not user visible.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-14 17:50:11 +01:00
Maarten ter Huurne 5a304e1a4e IIO: Ingenic JZ47xx: Set clock divider on probe
The SADC component can run at up to 8 MHz on JZ4725B, but is fed
a 12 MHz input clock (EXT). Divide it by two to get 6 MHz, then
set up another divider to match, to produce a 10us clock.

If the clock dividers are left on their power-on defaults (a divider
of 1), the SADC mostly works, but will occasionally produce erroneous
readings. This led to button presses being detected out of nowhere on
the RS90 every few minutes. With this change, no ghost button presses
were logged in almost a day worth of testing.

The ADCLK register for configuring clock dividers doesn't exist on
JZ4740, so avoid writing it there.

A function has been introduced rather than a flag because there is a lot
of variation between the ADCLK registers on JZ47xx SoCs, both in
the internal layout of the register and in the frequency range
supported by the SADC. So this solution should make it easier
to add support for other JZ47xx SoCs later.

Fixes: 1a78daea10 ("iio: adc: probe should set clock divider")
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-14 16:02:08 +01:00
Joe Perches ae8cc91a7d iio: adc: max9611: Fix misuse of GENMASK macro
Arguments are supposed to be ordered high then low.

Signed-off-by: Joe Perches <joe@perches.com>
Fixes: 69780a3bbc ("iio: adc: Add Maxim max9611 ADC driver")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-14 12:53:28 +01:00
Linus Torvalds f632a8170a Driver Core and debugfs changes for 5.3-rc1
Here is the "big" driver core and debugfs changes for 5.3-rc1
 
 It's a lot of different patches, all across the tree due to some api
 changes and lots of debugfs cleanups.  Because of this, there is going
 to be some merge issues with your tree at the moment, I'll follow up
 with the expected resolutions to make it easier for you.
 
 Other than the debugfs cleanups, in this set of changes we have:
 	- bus iteration function cleanups (will cause build warnings
 	  with s390 and coresight drivers in your tree)
 	- scripts/get_abi.pl tool to display and parse Documentation/ABI
 	  entries in a simple way
 	- cleanups to Documenatation/ABI/ entries to make them parse
 	  easier due to typos and other minor things
 	- default_attrs use for some ktype users
 	- driver model documentation file conversions to .rst
 	- compressed firmware file loading
 	- deferred probe fixes
 
 All of these have been in linux-next for a while, with a bunch of merge
 issues that Stephen has been patient with me for.  Other than the merge
 issues, functionality is working properly in linux-next :)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
 LpRyb3zX29oChFaZkc5a
 =XrEZ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and debugfs updates from Greg KH:
 "Here is the "big" driver core and debugfs changes for 5.3-rc1

  It's a lot of different patches, all across the tree due to some api
  changes and lots of debugfs cleanups.

  Other than the debugfs cleanups, in this set of changes we have:

   - bus iteration function cleanups

   - scripts/get_abi.pl tool to display and parse Documentation/ABI
     entries in a simple way

   - cleanups to Documenatation/ABI/ entries to make them parse easier
     due to typos and other minor things

   - default_attrs use for some ktype users

   - driver model documentation file conversions to .rst

   - compressed firmware file loading

   - deferred probe fixes

  All of these have been in linux-next for a while, with a bunch of
  merge issues that Stephen has been patient with me for"

* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
  debugfs: make error message a bit more verbose
  orangefs: fix build warning from debugfs cleanup patch
  ubifs: fix build warning after debugfs cleanup patch
  driver: core: Allow subsystems to continue deferring probe
  drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
  arch_topology: Remove error messages on out-of-memory conditions
  lib: notifier-error-inject: no need to check return value of debugfs_create functions
  swiotlb: no need to check return value of debugfs_create functions
  ceph: no need to check return value of debugfs_create functions
  sunrpc: no need to check return value of debugfs_create functions
  ubifs: no need to check return value of debugfs_create functions
  orangefs: no need to check return value of debugfs_create functions
  nfsd: no need to check return value of debugfs_create functions
  lib: 842: no need to check return value of debugfs_create functions
  debugfs: provide pr_fmt() macro
  debugfs: log errors when something goes wrong
  drivers: s390/cio: Fix compilation warning about const qualifiers
  drivers: Add generic helper to match by of_node
  driver_find_device: Unify the match function with class_find_device()
  bus_find_device: Unify the match callback with class_find_device
  ...
2019-07-12 12:24:03 -07:00
Linus Torvalds d7d170a8e3 chrome platform changes for v5.3
* CrOS EC:
 
 - Add new CrOS ISHTP transport protocol
 - Add proper documentation for debugfs entries and expose resume and uptime files
 - Select LPC transport protocol variant at runtime.
 - Add lid angle sensor driver
 - Fix oops on suspend/resume for lightbar driver
 - Set CrOS SPI transport protol in realtime
 
 * Wilco EC:
 
 - Add telemetry char device interface
 - Add support for event handling
 - Add new sysfs attributes
 
 * Misc:
 - Contains ib-mfd-cros-v5.3 immutable branch from mfd, with cros_ec_commands.h
   header freshly synced with Chrome OS's EC project.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXSbP3AAKCRBzbaomhzOw
 wjoNAP4lrY3UboMaQklHLOCxPTFXwIHjImXxJUCrezJj4eBRcwEAz+adSNKieVEY
 xNf/yetCkjVnQNMVjGaBJRUp3F+2LwQ=
 =/Xj3
 -----END PGP SIGNATURE-----

Merge tag 'tag-chrome-platform-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung
 "CrOS EC:
   - Add new CrOS ISHTP transport protocol
   - Add proper documentation for debugfs entries and expose resume and
     uptime files
   - Select LPC transport protocol variant at runtime.
   - Add lid angle sensor driver
   - Fix oops on suspend/resume for lightbar driver
   - Set CrOS SPI transport protol in realtime

  Wilco EC:
   - Add telemetry char device interface
   - Add support for event handling
   - Add new sysfs attributes

  Misc:
   - Contains ib-mfd-cros-v5.3 immutable branch from mfd, with
     cros_ec_commands.h header freshly synced with Chrome OS's EC
     project"

* tag 'tag-chrome-platform-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (54 commits)
  mfd / platform: cros_ec_debugfs: Expose resume result via debugfs
  platform/chrome: lightbar: Get drvdata from parent in suspend/resume
  iio: cros_ec: Add lid angle driver
  platform/chrome: wilco_ec: Add circular buffer as event queue
  platform/chrome: cros_ec_lpc_mec: Fix kernel-doc comment first line
  platform/chrome: cros_ec_lpc: Choose Microchip EC at runtime
  platform/chrome: cros_ec_lpc: Merge cros_ec_lpc and cros_ec_lpc_reg
  Input: cros_ec_keyb: mask out extra flags in event_type
  platform/chrome: wilco_ec: Fix unreleased lock in event_read()
  platform/chrome: cros_ec_debugfs: cros_ec_uptime_fops can be static
  platform/chrome: cros_ec_debugfs: Add debugfs ABI documentation
  platform/chrome: cros_ec_debugfs: Fix kernel-doc comment first line
  platform/chrome: cros_ec_debugfs: Add debugfs entry to retrieve EC uptime
  mfd: cros_ec: Update I2S API
  mfd: cros_ec: Add Management API entry points
  mfd: cros_ec: Add SKU ID and Secure storage API
  mfd: cros_ec: Add API for rwsig
  mfd: cros_ec: Add API for Fingerprint support
  mfd: cros_ec: Add API for Touchpad support
  mfd: cros_ec: Add API for EC-EC communication
  ...
2019-07-11 18:45:29 -07:00
Linus Torvalds e786741ff1 Staging / IIO driver update for 5.3-rc1
Here is the big Staging and IIO driver update for 5.3-rc1.
 
 Lots of new IIO drivers are in here, along with loads of tiny staging
 driver cleanups and fixes.  Overall we almost break even with the same
 lines added as removed.
 
 Full details are in the shortlog, they are too large to list here.
 
 All of these changes have been in linux-next for a while with no
 reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSXlWA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym5lgCgwNVvum2lwWzAVPkVEMqpGYLZPLgAoJqegC9o
 JsdX6tFoAC8q8+FXWgZ4
 =di3h
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO driver updates from Greg KH:
 "Here is the big Staging and IIO driver update for 5.3-rc1.

  Lots of new IIO drivers are in here, along with loads of tiny staging
  driver cleanups and fixes. Overall we almost break even with the same
  lines added as removed.

  Full details are in the shortlog, they are too large to list here.

  All of these changes have been in linux-next for a while with no
  reported issues"

* tag 'staging-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (608 commits)
  staging: kpc2000: simplify comparison to NULL in fileops.c
  staging: kpc2000: simplify comparison to NULL in dma.c
  staging: kpc2000: simplify comparison to NULL in kpc2000_spi.c
  staging: rtl8723bs: hal: remove redundant assignment to packetType
  staging: rtl8723bs: Change return type of hal_btcoex_IsBtDisabled()
  staging: rtl8723bs: Remove rtw_btcoex_DisplayBtCoexInfo()
  staging: rtl8723bs: Remove function rtw_btcoex_GetDBG()
  staging: rtl8723bs: Remove function rtw_btcoex_SetDBG()
  staging: rtl8723bs: Remove rtw_btcoex_IsBTCoexCtrlAMPDUSize()
  staging: rtl8723bs: Remove rtw_btcoex_BtInfoNotify()
  staging: rtl8723bs: Remove rtw_btcoex_ScanNotify()
  staging: rtl8723bs: Remove rtw_btcoex_SetSingleAntPath()
  staging: rtl8723bs: Remove rtw_btcoex_SetPGAntNum()
  staging: rtl8192e: remove redundant initialization of rtstatus
  staging: rtl8723bs: Remove rtw_btcoex_GetRaMask()
  staging: rtl8723bs: Remove rtw_btcoex_SetChipType()
  staging: rtl8723bs: Remove rtw_btcoex_ConnectNotify()
  staging: rtl8723bs: Remove rtw_btcoex_SetBTCoexist()
  staging: rtl8723bs: Remove rtw_btcoex_IsBtDisabled()
  staging: rtl8723bs: Remove rtw_btcoex_IsBtControlLps()
  ...
2019-07-11 15:36:02 -07:00
Thomas Gleixner 3419240495 Merge branch 'timers/vdso' into timers/core
so the hyper-v clocksource update can be applied.
2019-07-03 10:50:21 +02:00
Greg Kroah-Hartman c55cc97a25 Second set of IIO device support, features, cleanups and minor fixes for 5.3.
A few bits for the counters subsystem mixed in here as well.
 There are some late breaking fixes as well, which aren't so urgent
 they can't wait for the merge window.
 
 New Device Support
 * adf4371
   - New driver + bindings.
   - Support the adf4372 PLL. Mostly ID and bindings.
 * ad8366 (note includes rework of driver needed to allow support for these).
   - Support the ADL5240 variable gain amplifier (VGA).
   - Support the ADA4961 digital gain amplifier (DGA).
 * dps310
   - New driver, in several parts from different authors for this temp
     and pressure sensor.
   - Includes errata workaround for a temperature reading issue.
 * stk3310
   - Support the stk3335, mostly ID.
 
 Features and cleanups
 * core
   - drop error handling on debugfs registration.
   - harden by making sure we don't overrun iio_chan_info_postfix.
 * docs
   - convert remaining docs to rst. At somepoint we'll fit these few
     into the main IIO docs.
   - improve sampling_frequency_available docs but explaining the
     range form.
 * ad_sigma_delta
   - Drop a pointless goto.
 * ad2s1210
   - Drop pointless platform data null check seeing as we don't actually
     use platform data anymore.
 * ad7124
   - Relax limitation on channel numbers to allow pseudo different channels.
   - Support control of whether the input is buffered via DT.
   - Use dynamic allocation for channel configuration to make it easier
     to support new devices.
   - YAML binding conversion.
 * ad7150
   - Comment tidy up.
   - Consistent and simple if (ret) handling of i2c errors.
   - FIELD_GET and GENMASK.
   - Ternary rather than !!(condition) for readability.
   - Use macros to avoid repetition of channel definitions.
 * ad7606
   - Add software channel config (rather that pin controlled)
   - Refactor to simplify addition of new part in future.
 * ad7746
   - of_deivce_id table.
 * ad7780
   - MAINTAINERS entry
   - YAML DT bindings.
 * ad8366
   - Stop using core mlock in favour of well scoped local lock.
   - SPDX + copyright date update.
 * ad9834
   - of_device_id table
 * adf4371
   - Add support for output stage muting before lock on has occured.
 * adis library
   - MAINTAINERS entry to reflect that this now Alexandru's problem ;)
 * adis162xx:
   - Fix a slightly incorrect set of comments and print statements on
     minimum supported voltage.
 * adis16203
   - of_device_id table.
 * adis16240
   - Add of_device_id table (in two parts as first patch only used it for
     MODULE_DEVICE_TABLE.)
 * adt7316-spi
   - of_device_id table
 * adxl372
   - YAML DT binding conversion.
   - Cleanup use of buffer callback functions (precursor to core rework).
 * bh1710
   - Simplify getting the i2c adapter from the client.
 * dht11
   - Mote to newer GPIO consumer interface.
 * kxcjk-1013.c
   - Add binding for sensor in display of some ultrabooks after userspace
     tools updated for it not be a problem to report two similar sensors.
 * imx7d
   - drop unused variables.
   - white space
   - define instead of variable for clock frequency that is fixed.
   - drop pointless error message.
 * messon_saradc
   - SPDX
 * sps30
   - MAINTAINERS entry
   - YAML binding conversion.
 * st_accel
   - Tidy up ordering in various buffer related callbacks. This is
     part of a long running effort to simplify the core code.
 * stm32-dfsdm:
   - Manage the resolution cleanly in triggerd modes.
   - Add fast mode support which allows more flexible filter choices.
   - Add a comment on the reason for a 16 bit record when technically
     not 'required'.
 * st_lsm6dsx
   - Embed device name in the sensor_settings struct as i3c doesn't
     have a convenient name field to use for this.
 * xilinx-adc
   - Relax constraints on supported platforms to reflect that this
     can used with FPGAs on PCIe cards and hence many architectures.
 * counters/ftm-quaddec
   - Fix some formatting io MODULE_AUTHOR
   - MAINTAINERS entry
 
 Fixes
 * tools
   - fix incorrect handling of 32 bit channels.
 * sca3000
   - Potential endian bug that is unlikely to bite anyone (be64 host
     seems unlikely for this old part).
 * stm32-adc
   - Add vdda-supply. On some boards it needs to be turned on to supply
     the ADC.  DT bindings included.
 * stm32-dfsdm
   - Fix output resolution to work with filter orders other than 3.
   - Fix output datatype as it's signed and previously claimed not to be.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl0VHIkRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FojyxhAAgrLRy2wlHjQCAh0S6J22LKs02uPX1qvY
 nm1aI/av2DGcMCV2NF6J1sW2Mocvtt5a79/1f/wRqDzOHBrTpFr0Q0Ngwijv9bzc
 fv6NwfHlWolmXynKx8wK4b6Sa3KVCkltojEVpEVbhkuMkafSQ+pQzYF1Uf7enOrX
 j3Gq6NYaCks4YtFZsBphgzo3DC0mh7CfunlPiOdVcgcg4Pj/KZY9QCX86fJx972x
 YI3BRFHnDSMDOxOTjeqeKvMiqU2zLPlqLSEOCUw2XCrh6HI9qFiU+LVsYx6SP0tx
 aJ2q+qYc9raOTANHk7O2JZYWv/52JXvtKcFSLiuQdABjaAI20xEr1QAZYVYUiXmg
 dFH6lBsWvQyAy5F/SyZ5tavZvTfGsNDB5LhlpEggeO2W6cIIL4CLfHimB2EcxFSH
 utqEA72HQZosEUKut1jbmG6iYMiRnHS72pLOqkJ6HC/2/pZfoEWlEH9x/S3xbBsW
 918ISs9852VwjebQwck96+Dh0LwiKOl8Aii5ONzfNObJB6/JbULPoKKArsMdENQA
 mqDXLOMz6GspY3JgiVDCXAwg2x2Ht/ictR6svRJtOTLiBU2Iybpm/HRkPePhoePF
 HLw8fhwE+mOSWr22KhzjUJBHEAkoejo/14XOgKSTkO9V6amLlOWRDV3uK2PksmdI
 7DQyYhX9Tos=
 =a3vh
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO device support, features, cleanups and minor fixes for 5.3.

A few bits for the counters subsystem mixed in here as well.
There are some late breaking fixes as well, which aren't so urgent
they can't wait for the merge window.

New Device Support
* adf4371
  - New driver + bindings.
  - Support the adf4372 PLL. Mostly ID and bindings.
* ad8366 (note includes rework of driver needed to allow support for these).
  - Support the ADL5240 variable gain amplifier (VGA).
  - Support the ADA4961 digital gain amplifier (DGA).
* dps310
  - New driver, in several parts from different authors for this temp
    and pressure sensor.
  - Includes errata workaround for a temperature reading issue.
* stk3310
  - Support the stk3335, mostly ID.

Features and cleanups
* core
  - drop error handling on debugfs registration.
  - harden by making sure we don't overrun iio_chan_info_postfix.
* docs
  - convert remaining docs to rst. At somepoint we'll fit these few
    into the main IIO docs.
  - improve sampling_frequency_available docs but explaining the
    range form.
* ad_sigma_delta
  - Drop a pointless goto.
* ad2s1210
  - Drop pointless platform data null check seeing as we don't actually
    use platform data anymore.
* ad7124
  - Relax limitation on channel numbers to allow pseudo different channels.
  - Support control of whether the input is buffered via DT.
  - Use dynamic allocation for channel configuration to make it easier
    to support new devices.
  - YAML binding conversion.
* ad7150
  - Comment tidy up.
  - Consistent and simple if (ret) handling of i2c errors.
  - FIELD_GET and GENMASK.
  - Ternary rather than !!(condition) for readability.
  - Use macros to avoid repetition of channel definitions.
* ad7606
  - Add software channel config (rather that pin controlled)
  - Refactor to simplify addition of new part in future.
* ad7746
  - of_deivce_id table.
* ad7780
  - MAINTAINERS entry
  - YAML DT bindings.
* ad8366
  - Stop using core mlock in favour of well scoped local lock.
  - SPDX + copyright date update.
* ad9834
  - of_device_id table
* adf4371
  - Add support for output stage muting before lock on has occured.
* adis library
  - MAINTAINERS entry to reflect that this now Alexandru's problem ;)
* adis162xx:
  - Fix a slightly incorrect set of comments and print statements on
    minimum supported voltage.
* adis16203
  - of_device_id table.
* adis16240
  - Add of_device_id table (in two parts as first patch only used it for
    MODULE_DEVICE_TABLE.)
* adt7316-spi
  - of_device_id table
* adxl372
  - YAML DT binding conversion.
  - Cleanup use of buffer callback functions (precursor to core rework).
* bh1710
  - Simplify getting the i2c adapter from the client.
* dht11
  - Mote to newer GPIO consumer interface.
* kxcjk-1013.c
  - Add binding for sensor in display of some ultrabooks after userspace
    tools updated for it not be a problem to report two similar sensors.
* imx7d
  - drop unused variables.
  - white space
  - define instead of variable for clock frequency that is fixed.
  - drop pointless error message.
* messon_saradc
  - SPDX
* sps30
  - MAINTAINERS entry
  - YAML binding conversion.
* st_accel
  - Tidy up ordering in various buffer related callbacks. This is
    part of a long running effort to simplify the core code.
* stm32-dfsdm:
  - Manage the resolution cleanly in triggerd modes.
  - Add fast mode support which allows more flexible filter choices.
  - Add a comment on the reason for a 16 bit record when technically
    not 'required'.
* st_lsm6dsx
  - Embed device name in the sensor_settings struct as i3c doesn't
    have a convenient name field to use for this.
* xilinx-adc
  - Relax constraints on supported platforms to reflect that this
    can used with FPGAs on PCIe cards and hence many architectures.
* counters/ftm-quaddec
  - Fix some formatting io MODULE_AUTHOR
  - MAINTAINERS entry

Fixes
* tools
  - fix incorrect handling of 32 bit channels.
* sca3000
  - Potential endian bug that is unlikely to bite anyone (be64 host
    seems unlikely for this old part).
* stm32-adc
  - Add vdda-supply. On some boards it needs to be turned on to supply
    the ADC.  DT bindings included.
* stm32-dfsdm
  - Fix output resolution to work with filter orders other than 3.
  - Fix output datatype as it's signed and previously claimed not to be.

* tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (68 commits)
  iio: iio-utils: Fix possible incorrect mask calculation
  iio: frequency: adf4371: Add support for output stage mute
  dt-bindings: iio: frequency: Add ADF4372 PLL documentation
  iio: frequency: adf4371: Add support for ADF4372 PLL
  dt-bindings: iio: adc: Add buffered input property
  Convert AD7124 bindings documentation to YAML format.
  iio: adc: ad7124: Shift to dynamic allocation for channel configuration
  iio: adc: ad7124: Add buffered input support
  iio: adc: ad7124: Remove input number limitation
  MAINTAINERS: add ADIS IMU driver library entry
  iio: adis162xx: fix low-power docs & reports
  counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR
  iio: core: no need to check return value of debugfs_create functions
  docs: iio: convert to ReST
  iio: adc: stm32-adc: add missing vdda-supply
  dt-bindings: iio: adc: stm32: add missing vdda supply
  iio: adc: stm32-dfsdm: add comment for 16 bits record
  iio: adc: stm32-dfsdm: add fast mode support
  iio: adc: stm32-dfsdm: manage data resolution in trigger mode
  iio: adc: stm32-dfsdm: fix data type
  ...
2019-07-01 10:58:13 +02:00
Stefan Popa def914a4c3 iio: frequency: adf4371: Add support for output stage mute
Another feature of the ADF4371/ADF4372 is that the supply current to the
RF8P and RF8N output stage can shut down until the ADF4371 achieves lock
as measured by the digital lock detect circuitry. The mute to lock
detect bit (MUTE_LD) in REG25 enables this function.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-26 21:24:21 +01:00
Stefan Popa 13a0af411a iio: frequency: adf4371: Add support for ADF4372 PLL
The ADF4372 is part of the same family with ADF4371, the main difference
is that it has only 3 channels instead of 4, as the frequency quadrupler
is missing. As a result, the ADF4372 allows frequencies from 62.5 MHz to
16 GHz to be generated.

Datasheet:
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/adf4372.pdf

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-26 21:24:21 +01:00
Mircea Caprioru 1478a388f4 iio: adc: ad7124: Shift to dynamic allocation for channel configuration
This patch changes the channel configuration member of the device
structure from a fixed size array to a dynamic allocated one with a size
equal to the number of channels specified in the device tree. This will
ensure a more flexibility for compatible devices.

Ex. ad7124-4 - can have 4 differential or 8 pseudo-differential channels
ad7124-8 - can have 8 differential or 16 pseudo-differential channels

Also the device can suspport any other combination of differential and
pseudo-differential channels base on the physical number of inputs
available.

Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-26 21:24:21 +01:00
Mircea Caprioru 0eaecea6e4 iio: adc: ad7124: Add buffered input support
This patch adds the option to enable the buffered mode for positive and
negative inputs. Each option can be enabled independently.

In buffered mode, the input channel feeds into a high impedance input stage
of the buffer amplifier. Therefore, the input can tolerate significant
source impedances and is tailored for direct connection to external
resistive type sensors such as strain gages or RTDs.

Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-26 21:24:21 +01:00
Mircea Caprioru f1794fd7bd iio: adc: ad7124: Remove input number limitation
The driver limits the user to use only 4/8 differential inputs, but this
device has the option to use pseudo-differential channels. This will
increase the number of channels to be equal with the number of inputs so 8
channels for ad7124-4 and 16 for ad7124-8.

This patch removes the check between channel nodes and num_inputs value.

Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-26 21:24:21 +01:00
Alexandru Ardelean 10dd571c66 iio: adis162xx: fix low-power docs & reports
All current ADIS162XX drivers have incorrect values defined via comments.
Also, when an error is reported the printed value is incorrect.

The functionality itself isn't affected, so it's not a critical issue.

And since the change is trivial, it was included in a single patch that
fixes these in one go. All values were correlated with the ones specified
in the data-sheets.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-26 21:24:20 +01:00
Gwendal Grignou 0451cc8ce2 iio: cros_ec: Add lid angle driver
Add a IIO driver that reports the angle between the lid and the base for
ChromeOS convertible device.

Tested on eve with ToT EC firmware.
Check driver is loaded and lid angle is correct.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-06-25 15:28:06 +02:00
Suzuki K Poulose 418e3ea157 bus_find_device: Unify the match callback with class_find_device
There is an arbitrary difference between the prototypes of
bus_find_device() and class_find_device() preventing their callers
from passing the same pair of data and match() arguments to both of
them, which is the const qualifier used in the prototype of
class_find_device().  If that qualifier is also used in the
bus_find_device() prototype, it will be possible to pass the same
match() callback function to both bus_find_device() and
class_find_device(), which will allow some optimizations to be made in
order to avoid code duplication going forward.  Also with that, constify
the "data" parameter as it is passed as a const to the match function.

For this reason, change the prototype of bus_find_device() to match
the prototype of class_find_device() and adjust its callers to use the
const qualifier in accordance with the new prototype of it.

Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Kershner <david.kershner@unisys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: rafael@kernel.org
Acked-by: Corey Minyard <minyard@acm.org>
Acked-by: David Kershner <david.kershner@unisys.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-24 05:22:31 +02:00
Greg Kroah-Hartman 90b45399b4 Merge 5.2-rc6 into staging-next
We want the fixes and this resolves a merge issue as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-23 13:29:03 +02:00
Jason A. Donenfeld 9285ec4c8b timekeeping: Use proper clock specifier names in functions
This makes boot uniformly boottime and tai uniformly clocktai, to
address the remaining oversights.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20190621203249.3909-2-Jason@zx2c4.com
2019-06-22 12:11:27 +02:00
Greg Kroah-Hartman 8915aacac4 iio: core: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-22 10:44:00 +01:00
Mauro Carvalho Chehab 1c349f4fd3 docs: iio: convert to ReST
Rename the iio documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-22 10:41:57 +01:00
Fabrice Gasnier 7685010fca iio: adc: stm32-adc: add missing vdda-supply
Add missing vdda-supply, analog power supply, to STM32 ADC. When vdda is
an independent supply, it needs to be properly turned on or off to supply
the ADC.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Fixes: 1add698802 ("iio: adc: Add support for STM32 ADC core").
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-22 10:37:26 +01:00
Olivier Moysan 18eaffab90 iio: adc: stm32-dfsdm: add comment for 16 bits record
Add a comment on DMA configuration for 16 bits record.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-22 10:32:43 +01:00
Olivier Moysan d716204fd5 iio: adc: stm32-dfsdm: add fast mode support
The use of fast mode allows to get a larger set of solution
for filter parameters. This can be useful to reach a better
output sample resolution, when fast mode can be used.

Fast mode is selected at startup if it is relevant.
The startup is performed in postenable callback context,
where there are too tight time constraints for filter parameters
computation. For this reason both fast and non fast filter parameters
are pre-computed previously.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-22 10:29:19 +01:00
Olivier Moysan 102afde629 iio: adc: stm32-dfsdm: manage data resolution in trigger mode
Add output sample resolution management in scan mode.
Add stm32_dfsdm_process_data() function to share sample
processing between continuous and trigger modes.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-22 10:23:53 +01:00
Olivier Moysan c6013bf50e iio: adc: stm32-dfsdm: fix data type
Fix the data type as DFSDM raw output is complements 2,
24bits left aligned in a 32-bit register.
This change does not affect AUDIO path
- Set data as signed for IIO (as for AUDIO)
- Set 8 bit right shift for IIO.
The 8 LSBs bits of data contains channel info and are masked.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Fixes: e2e6771c64 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support")
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-22 10:20:21 +01:00
Olivier Moysan 12c8398d80 iio: adc: stm32-dfsdm: fix output resolution
In buffered mode, output samples are shifted left
unconditionally. This works for filter order 3,
but this shift is not adapted for other filter orders.
Compute required shift, left or right, and shift
output data accordingly.
Add also saturation management to avoid wrap-around
when maximum positive sample is reached.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Fixes: eca949800d ("IIO: ADC: add stm32 DFSDM support for PDM microphone")
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-22 10:18:51 +01:00
Dan Carpenter aabcbfe8db iio: sca3000: Potential endian bug in sca3000_read_event_value()
The problem is that "ret" is an int but we're casting it as
"(unsigned long *)&ret" when we do the for_each_set_bit() loop.  This
will not work on big endian 64 bit systems.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-22 09:40:36 +01:00
Alexandru Ardelean 05b8bcc962 iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
The iio_triggered_buffer_{predisable,postenable} functions attach/detach
the poll functions.

For the predisable hook, the disable code should occur before detaching
the poll func, and for the postenable hook, the poll func should be
attached before the enable code.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-22 09:24:41 +01:00
Linus Torvalds db54615e21 Staging/IIO/Counter fixes for 5.2-rc6
Here are some small driver bugfixes for some staging/iio/counter
 drivers.
 
 Staging and IIO have been lumped together for a while, as those
 subsystems cross the areas a log, and counter is used by IIO, so that's
 why they are all in one pull request here.
 
 These are small fixes for reported issues in some iio drivers, the erofs
 filesystem, and a build issue for counter code.
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXQyM7w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymBUwCYn7LKiishfnvx8PpGF1lGHNmtYACgrNoAWKRZ
 PUlOWXEbtD7NAPtqn3c=
 =tXAQ
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO/counter fixes from Greg KH:
 "Here are some small driver bugfixes for some staging/iio/counter
  drivers.

  Staging and IIO have been lumped together for a while, as those
  subsystems cross the areas a log, and counter is used by IIO, so
  that's why they are all in one pull request here.

  These are small fixes for reported issues in some iio drivers, the
  erofs filesystem, and a build issue for counter code.

  All have been in linux-next with no reported issues"

* tag 'staging-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: erofs: add requirements field in superblock
  counter/ftm-quaddec: Add missing dependencies in Kconfig
  staging: iio: adt7316: Fix build errors when GPIOLIB is not set
  iio: temperature: mlx90632 Relax the compatibility check
  iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller
  staging:iio:ad7150: fix threshold mode config bit
2019-06-21 10:20:19 -07:00
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Thomas Gleixner 4c3dd9cd76 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 3 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081205.739216165@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:52 +02:00
Thomas Gleixner 0a151468f9 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope it will be useful but without any warranty
  without even the implied warranty of merchantability or fitness for
  a particular purpose see the gnu general public license for more
  details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 1 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081205.379537898@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:52 +02:00
Thomas Gleixner cb849fc5f0 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 459
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation the gpl this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  version 2 gplv2 for more details you should have received a copy of
  the gnu general public license version 2 gplv2 along with this
  source code

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 16 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081201.771169395@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:09 +02:00
Greg Kroah-Hartman d7a5417b89 Second set of IIO fixes for the 5.2 cycle.
* ad7150
   - sense of bit for controlling adaptive vs fixed threshold was flipped.
 * adt7316
   - Fix a build issue due to wrong headers for gpio usage.
 * lsm6dsx
   - correctly suspend / resume i2c slaves when the host goes to sleep.
 * mlx90632
   - relax a compatability check to allow for newer devices.
 
 Also one counters fix
 
 * counter/ftm-quaddec
   - missing dependencies in Kconfig.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl0H5PURHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foh7bhAAqF/VG9KhIioY4ov5U+Exh5OGzirhTLKC
 TyuK4fnSHO9avql1lTAc9b/tt2tBdE4f0vel6CSP+1GlbwfG01AYUu+ZW7j/GkgT
 D09o4IH1TspqH5nIc2JunZwYqPJG2v7Fis9IMtS13eTJ+csf9EhVCuIf8tnaPwyM
 /OH7t3JdSqxtsxHECEsZhl5IDrqZKyQI3+7MtlpcnuQpNjrrwxey4B54csZamUH8
 nhefM7CtI+roaT+Ydp5oNpvpVXhNH54rVKwEkJfeuhiuviHoO7SgUF59u4vp9JYa
 5dVo+T8+b2gsAt1w4jDCNDALTrFYL1d4XCyHuW+ZvpTGfb99E0g2QRStuBJp0Nyn
 9s9K05KTdcHi3HBUxx+pKh7MDUBzKSm5T5euq4ZHRUKF3vjfBhsoN4iVh31IHa53
 Nv28vnnxUd7RXHZonoi9wIT0zoDSY1IvpNGtwJaOjBJNcUjtDQivV2KqqvvvSfj0
 g7KswaUB5icRR/mtL4Jj2j0voD2e+mMXgknRmHJthXKBKzs4lQHFPqI1rZQy8DRg
 2YCi5zJNPBmf7hNbMqyt5YEkflZST3zzOUBRxdju4w3lwKZl6+bQd5B82ET6DZSr
 n99WXsGcdck/JEWomUhGb5uTbS2LAgsVLIXJTDzgzwQqE4Vp7FFYIHDNeTJx43Cm
 bEvNn0cT6a8=
 =2i3G
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Second set of IIO fixes for the 5.2 cycle.

* ad7150
  - sense of bit for controlling adaptive vs fixed threshold was flipped.
* adt7316
  - Fix a build issue due to wrong headers for gpio usage.
* lsm6dsx
  - correctly suspend / resume i2c slaves when the host goes to sleep.
* mlx90632
  - relax a compatability check to allow for newer devices.

Also one counters fix

* counter/ftm-quaddec
  - missing dependencies in Kconfig.

* tag 'iio-fixes-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  counter/ftm-quaddec: Add missing dependencies in Kconfig
  staging: iio: adt7316: Fix build errors when GPIOLIB is not set
  iio: temperature: mlx90632 Relax the compatibility check
  iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller
  staging:iio:ad7150: fix threshold mode config bit
2019-06-17 22:28:29 +02:00
Robert Hancock 8bb0d36cba iio: adc: xilinx: support all platforms
Since the XADC logic can be used with standalone Xilinx FPGAs, this
driver can potentially be used with many different platforms, not just
the Zynq and MicroBlaze platforms this driver was allowed to be built
for. There should be no platform-specific code in this driver, so just
delete the platform dependency.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:49 +01:00
Shobhit Kukreti 7e8b817e59 iio: humidity: Replace older GPIO APIs with GPIO Consumer APIs for the dht11 sensor
The dht11 driver uses a single gpio to make measurements. It was
using the older global gpio numberspace. The patch replaces the
old gpio api with the new gpio descriptor based api.

Removed header files "linux/gpio.h" and "linux/of_gpio.h"

Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Acked-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:49 +01:00
Alexandru Ardelean 387c1d7706 iio: ad_sigma_delta: return directly in ad_sd_buffer_postenable()
There is nothing being done after the `err_predisable` label, so just
remove it.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:48 +01:00
Alexandru Ardelean 075da9cd6a iio: amplifiers: ad8366: Add support for ADL5240 VGA
The ADL5240 is a high performance, digitally controlled variable gain
amplifier (VGA) operating from 100 MHz to 4000 MHz. The VGA integrates a
high performance, 20 dB gain, internally matched amplifier (AMP) with a
6-bit digital step attenuator (DSA) that has a gain control range of
31.5 dB in 0.5 dB steps with ±0.25 dB step accuracy.

Datasheet link:
  https://www.analog.com/media/en/technical-documentation/data-sheets/adl5240.pdf

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:48 +01:00
Paul Cercueil cee211f4e5 iio: amplifiers: ad8366: Add support for the ADA4961 DGA
This change adds support for the ADA4961 BiCMOS RF Digital Gain Amplifier,
(DGA), which is optimized for driving heavy loads out 2.0 GHz and beyond.
The device typically achieves -90 dBc IMD3 performance at 500 MHz and
-85  dBc at 1.5 GHz.

Datasheet link:
 http://www.analog.com/media/en/technical-documentation/data-sheets/ADA4961.pdf

This change re-uses the existing ad8366 driver, as most logic is similar.
Also, this chip has a reset pin which is initialized during probe.

Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:48 +01:00
Alexandru Ardelean 11ab555a6d iio: amplifiers: ad8366: rework driver to allow other chips
The SPI gain amplifiers are simple devices, with 1 or 2 channels, to which
are read-from/written-to.

The gain computation in ad8366_write_raw() has been updated to compute gain
in dB for negative values.

This driver will be extended to support other chips as well.
To do that, this rework handles the AD8366 device as a special-case (via
switch-statements). This will make things easier when adding new chips.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:47 +01:00
Alexandru Ardelean dbcf6b5d26 iio: amplifiers: ad8366: use own lock to guard state
This driver is still using iio_dev's mlock to guard against inconsistent
state. This has been discouraged for some time.

This change switches to using it's own mutex, defined on the state struct.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:47 +01:00
Alexandru Ardelean 38ffa3a34c iio: amplifiers: update license information
Use the new `SPDX-License-Identifier` tag to specify the license.
For ad8366, also update copyright years in the header part.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:47 +01:00
Alexandru Ardelean 0e4f0b42f4 iio: adxl372: fix iio_triggered_buffer_{pre,post}enable positions
The iio_triggered_buffer_{predisable,postenable} functions attach/detach
the poll functions.

For the predisable hook, the disable code should occur before detaching
the poll func, and for the postenable hook, the poll func should be
attached before the enable code.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:45 +01:00
Stefan Popa 7f699bd149 iio: frequency: adf4371: Add support for ADF4371 PLL
The ADF4371 is a frequency synthesizer with an integrated voltage
controlled oscillator (VCO) for phase-locked loops (PLLs). The ADF4371
has an integrated VCO with a fundamental output frequency ranging from
4000 MHz to 8000 MHz. In addition, the VCO frequency is connected to
divide by 1, 2, 4, 8, 16, 32, or 64 circuits that allows the user to
generate radio frequency (RF) output frequencies as low as 62.5 MHz at
RF8x. A frequency multiplier at RF16x generates from 8 GHz to 16 GHz. A
frequency quadrupler generates frequencies from 16 GHz to 32 GHz at RF32x.
RFAUX8x duplicates the frequency range of RF8x or permits direct access to
the VCO output.

The driver takes the reference input frequency from the device tree and
uses it to calculate and maximize the PFD frequency (frequency of the phase
frequency detector). The PFD frequency is further used to calculate the
timeouts: synthesizer lock, VCO band selection, automatic level
calibration (ALC) and PLL settling time.

This initial driver exposes the attributes for setting the frequency and
enabling/disabling the different adf4371 channels.

Datasheet:
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/adf4371.pdf

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:45 +01:00
Lorenzo Bianconi 81956a93b5 iio: imu: st_lsm6dsx: get device name from st_lsm6dsx_sensor_settings
Introduce sensor name in st_lsm6dsx_sensor_settings table. This is
a preliminary patch to add I3C support to st_lsm6dsx since i3c_device_id
data structure does not contain a name field

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:45 +01:00