Commit Graph

440 Commits

Author SHA1 Message Date
Linus Torvalds f8965467f3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)
  qlcnic: adding co maintainer
  ixgbe: add support for active DA cables
  ixgbe: dcb, do not tag tc_prio_control frames
  ixgbe: fix ixgbe_tx_is_paused logic
  ixgbe: always enable vlan strip/insert when DCB is enabled
  ixgbe: remove some redundant code in setting FCoE FIP filter
  ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp
  ixgbe: fix header len when unsplit packet overflows to data buffer
  ipv6: Never schedule DAD timer on dead address
  ipv6: Use POSTDAD state
  ipv6: Use state_lock to protect ifa state
  ipv6: Replace inet6_ifaddr->dead with state
  cxgb4: notify upper drivers if the device is already up when they load
  cxgb4: keep interrupts available when the ports are brought down
  cxgb4: fix initial addition of MAC address
  cnic: Return SPQ credit to bnx2x after ring setup and shutdown.
  cnic: Convert cnic_local_flags to atomic ops.
  can: Fix SJA1000 command register writes on SMP systems
  bridge: fix build for CONFIG_SYSFS disabled
  ARCNET: Limit com20020 PCI ID matches for SOHARD cards
  ...

Fix up various conflicts with pcmcia tree drivers/net/
{pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and
wireless/orinoco/spectrum_cs.c} and feature removal
(Documentation/feature-removal-schedule.txt).

Also fix a non-content conflict due to pm_qos_requirement getting
renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-20 21:04:44 -07:00
Linus Torvalds f39d01be4c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
  vlynq: make whole Kconfig-menu dependant on architecture
  add descriptive comment for TIF_MEMDIE task flag declaration.
  EEPROM: max6875: Header file cleanup
  EEPROM: 93cx6: Header file cleanup
  EEPROM: Header file cleanup
  agp: use NULL instead of 0 when pointer is needed
  rtc-v3020: make bitfield unsigned
  PCI: make bitfield unsigned
  jbd2: use NULL instead of 0 when pointer is needed
  cciss: fix shadows sparse warning
  doc: inode uses a mutex instead of a semaphore.
  uml: i386: Avoid redefinition of NR_syscalls
  fix "seperate" typos in comments
  cocbalt_lcdfb: correct sections
  doc: Change urls for sparse
  Powerpc: wii: Fix typo in comment
  i2o: cleanup some exit paths
  Documentation/: it's -> its where appropriate
  UML: Fix compiler warning due to missing task_struct declaration
  UML: add kernel.h include to signal.c
  ...
2010-05-20 09:20:59 -07:00
David S. Miller 2ec8c6bb5d Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	include/linux/mod_devicetable.h
	scripts/mod/file2alias.c
2010-05-18 23:01:55 -07:00
Andreas Dilger 0ddc9324b1 add descriptive comment for TIF_MEMDIE task flag declaration.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-14 11:13:27 +02:00
Michal Simek a5e48b88da microblaze: Fix module loading on system with WB cache
There is necessary to flush whole dcache. Icache work should be
done in kernel/module.c.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-14 07:43:38 +02:00
Michal Simek ee4bcdf1d2 microblaze: export assembly functions used by modules
Export __strncpy_user, memory_size, ioremap_bot for modules.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13 12:11:42 +02:00
Michal Simek 1ce2470aa5 microblaze: Remove powerpc code from Microblaze port
Remove eeh_add_device_tree_late which is powerpc specific code.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13 12:09:54 +02:00
Michal Simek ddfbc935ea microblaze: Remove compilation warnings in cache macro
CC      arch/microblaze/kernel/cpu/cache.o
arch/microblaze/kernel/cpu/cache.c: In function '__invalidate_dcache_range_wb':
arch/microblaze/kernel/cpu/cache.c:398: warning: ISO C90 forbids mixed declarations and code
arch/microblaze/kernel/cpu/cache.c: In function '__flush_dcache_range_wb':
arch/microblaze/kernel/cpu/cache.c:509: warning: ISO C90 forbids mixed declara

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13 10:55:47 +02:00
Steven J. Magnani e1733d2c39 microblaze: export assembly functions used by modules
Modules that use copy_{to,from}_user(), memcpy(), and memset() fail to build
in certain circumstances.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13 10:46:04 +02:00
Steven J. Magnani 538722ca3b microblaze: fix get_user/put_user side-effects
The Microblaze implementations of get_user() and (MMU) put_user() evaluate
the address argument more than once. This causes unexpected side-effects for
invocations that include increment operators, i.e. get_user(foo, bar++).

This patch also removes the distinction between MMU and noMMU put_user().

Without the patch:
  $ echo 1234567890 > /proc/sys/kernel/core_pattern
  $ cat /proc/sys/kernel/core_pattern
  12345

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
2010-05-13 09:21:14 +02:00
Steven J. Magnani 0d5961b7f6 microblaze: re-enable interrupts before calling schedule
schedule() should not be called with interrupts disabled.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13 09:21:01 +02:00
David S. Miller 278554bd65 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/net/wireless/ath/ar9170/usb.c
	drivers/scsi/iscsi_tcp.c
	net/ipv4/ipmr.c
2010-05-12 00:05:35 -07:00
David S. Miller e0e33280fe Revert "microblaze: Kill NET_SKB_PAD and NET_IP_ALIGN overrides."
This reverts commit 39e0786d3c.

On request from microblaze developers, they are going to handle
this differently.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-07 02:55:33 -07:00
David S. Miller 39e0786d3c microblaze: Kill NET_SKB_PAD and NET_IP_ALIGN overrides.
NET_IP_ALIGN defaults to 2, no need to override.

NET_SKB_PAD is now 64, which is much larger than microblaze's
L1_CACHE_SIZE so no need to override that either.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 22:01:53 -07:00
Michal Simek 6513412135 microblaze: Defconfig update
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:37:42 +02:00
Michal Simek 3274c5707c microblaze: Optimize CACHE_LOOP_LIMITS and CACHE_RANGE_LOOP macros
1. Remove CACHE_ALL_LOOP2 macro because it is identical to CACHE_ALL_LOOP
2. Change BUG_ON to WARN_ON
3. Remove end aligned from CACHE_LOOP_LIMITS.
C implementation do not need aligned end address and ASM code do aligned
in their macros
4. ASM optimized  CACHE_RANGE_LOOP_1/2 macros needs to get aligned end address.
Because end address is compound from start + size, end address is the first address
which is exclude.

Here is the corresponding code which describe it.
+       int align = ~(line_length - 1);
+       end = ((end & align) == end) ? end - line_length : end & align;

a) end is aligned:
it is necessary to subtruct line length because we don't want to work with
next cacheline
b) end address is not aligned:
Just align it to be ready for ASM code.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:22:00 +02:00
Michal Simek 385e1efafc microblaze: Fix consistent-sync code
PCI_DMA_FROMDEVICE should call invalidation not flushing.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:22:00 +02:00
Michal Simek 598acab44d microblaze: Define correct L1_CACHE_SHIFT value
Microblaze cacheline length is configurable and current cpu
uses two cacheline length 4 and 8.

We are taking conservative maximum value to be sure that cacheline
alignment is satisfied for all cases.

Here is the calculation for cacheline lenght 8  32bit=4Byte values
which is corresponding with SHIFT 5.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:59 +02:00
Michal Simek 77543cebab microblaze: cpuinfo shows cache line length
Show cache line length in /proc/cpuinfo.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:59 +02:00
Michal Simek de925d9d3b microblaze: Fix kmalloc alignment on non-coherent DMA platforms
Based on PowerPC patche 52142e756e

PowerPC description:
On platforms doing non-coherent DMA (4xx, 8xx, ...), it's important
that the kmalloc minimum alignment is set to the cache line size, to
avoid sharing cache lines between different objects, so that DMA to
one of the objects doesn't corrupt the other.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:59 +02:00
Michal Simek c17e1a1ced microblaze: Fix typo fault in cache code
Copy & paste error.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:59 +02:00
Michal Simek f1525765fb microblaze: Fix consistent code
This patch fix consistent code which had problems with consistent_free
function.
I am not sure if we need to call flush_tlb_all after it but it keeps
tlbs synced.
I added noMMU and MMU version together.

Uncached shadow feature is not tested.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:59 +02:00
Michal Simek 16f6e99892 microblaze: pci-dma: use include/linux/dma-mapping.h
Based on af407c6db1
and f41b177157

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:59 +02:00
Michal Simek 22dcc2e3b9 microblaze: page.h: Remove get_user_page and free_user_page
Remove ancient macros which are here from Linux-2.4

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:59 +02:00
Michal Simek 43f2a6e8b1 microblaze: Remove "cache" optimized copy_page function
Current implementation doesn't handle dcache_line_length
correctly that's why is better to use generic memcpy.

Cache optimized function could be good way howto improve
performance but must be based on benchmarking not blind
function like this.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:58 +02:00
Nick Piggin 21e1c93631 microblaze: invoke oom-killer from page fault
As explained in commit 1c0fe6e3bd, we want to call the architecture independent
oom killer when getting an unexplained OOM from handle_mm_fault, rather than
simply killing current.

Cc: microblaze-uclinux@itee.uq.edu.au
Cc: Michal Simek <monstr@monstr.eu>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:58 +02:00
Randy Dunlap f3ff8212a2 microblaze: fix divide by zero exception message
Fix divide exception message to say "divide by zero".

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc:	Michal Simek <monstr@monstr.eu>
Cc:	microblaze-uclinux@itee.uq.edu.au
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:58 +02:00
Michal Simek 113a591a17 microblaze: Add isa_dma_bridge_buggy to dma.h
It is necessary for several drivers.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:58 +02:00
Michal Simek e768223109 microblaze: Remove ancient code
I found several function which we don't use that's why I am removing them.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:58 +02:00
Michal Simek 63f1032b97 microblaze: Quiet section mismatch warnings for MMU version
Remove section mismatch - based on ppc aproach.

WARNING: vmlinux.o(.text+0x64834): Section mismatch in reference
from the function __pte_alloc_kernel() to the function .init.text:early_get_page()
The function __pte_alloc_kernel() references
the function __init early_get_page().
This is often because __pte_alloc_kernel lacks a __init
annotation or the annotation of early_get_page is wrong.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:58 +02:00
Steven J. Magnani 7a0248e819 microblaze: Quiet section mismatch warnings
_start is located in .text, which causes mismatch warnings with
machine_early_init() and start_kernel() in .init.text.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:57 +02:00
Steven J. Magnani e6d7961e5b microblaze: Fix IRQ entry/exit ftracing
Function traces on Microblaze don't include IRQ entry and exit arrows,
i.e.

 0)               |                            memcpy_toiovec() {
 0)   ==========> |
 0)               |                              do_IRQ() {
 ...
 0)   <========== |
 0) ! 5414.000 us |                            }

...because do_IRQ() doesn't have the proper attributes.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:57 +02:00
Michal Simek c86fac4382 microblaze: resource/PCI: align functions now return start of resource
This change should be part of b26b2d494b

Origin description:

resource/PCI: align functions now return start of resource

As suggested by Linus, align functions should return the start
of a resource, not void. An update of "res->start" is no longer
necessary.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:57 +02:00
Michal Simek 8a66da71fa microblaze: PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs
This change should be part of 89a74ecccd

Origin description:

PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs

No functional change; this converts loops that iterate from 0 to
PCI_BUS_NUM_RESOURCES through pci_bus resource[] table to use the
pci_bus_for_each_resource() iterator instead.

This doesn't change the way resources are stored; it merely removes
dependencies on the fact that they're in a table.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:57 +02:00
John Linn e44171f115 Add non-Virtex5 support for LL TEMAC driver
This patch adds support for using the LL TEMAC Ethernet driver on
non-Virtex 5 platforms by adding support for accessing the Soft DMA
registers as if they were memory mapped instead of solely through the
DCR's (available on the Virtex 5).

The patch also updates the driver so that it runs on the MicroBlaze.
The changes were tested on the PowerPC 440, PowerPC 405, and the
MicroBlaze platforms.

Signed-off-by: John Tyner <jtyner@cs.ucr.edu>
Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 01:33:44 -07:00
Michal Simek af2b021fd6 microblaze: Remove unused variable from ptrace
Patch b3c1e01a09 should do it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-07 15:47:55 +02:00
John Linn 7a325aa26c microblaze: io.h: Add io big-endian function
Add new io big-endian function. They will be used
for uartlite and spi driver.

Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-07 15:47:37 +02:00
Michal Simek 4bb30baa6d microblaze: Fix futex code
Use logical and NOT for ANDN. It was likely type fault.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-07 07:27:25 +02:00
Steven J. Magnani d2bf98e6fc microblaze: Fix ftrace_update_ftrace_func panic
The Microblaze dynamic ftrace code assumes a call ordering that is not met
in all scenarios. Specifically, executing a command similar to:

  echo 105 > /sys/kernel/debug/tracing/set_ftrace_pid

before any other tracing-related commands results in a kernel panic:

  BUG: failure at arch/microblaze/kernel/ftrace.c:198/ftrace_update_ftrace_func()!

Recoding ftrace_update_ftrace_func() to use &ftrace_caller directly eliminates
the need to capture its address elsewhere (and thus rely on a particular call
sequence).

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-07 07:27:25 +02:00
Tejun Heo 336f5899d2 Merge branch 'master' into export-slabh 2010-04-05 11:37:28 +09:00
Michal Simek ca3865bae5 microblaze: Support word copying in copy_tofrom_user
Word copying is used only for aligned addresses.
Here is space for improving to use any better copying technique.
Look at memcpy implementation.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:25 +02:00
Michal Simek 6059b3cbeb microblaze: Print early printk information to log buffer
If early printk console is not enabled then all messages
are written to log buffer.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:25 +02:00
Michal Simek 3f21893586 microblaze: head.S typo fix
I forget to change register name in comments.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek 0691c97d74 microblaze: Use MICROBLAZE_TLB_SIZE in asm code
TLB size was hardcoded in asm code. This patch brings ability
to change TLB size only in one place. (mmu.h).

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek 9373dd6ab1 microblaze: Kconfig Fix - pci
I forget to remove pci Kconfig option.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek 78ebfa884b microblaze: Adding likely macros
On the base on GCOV analytics is helpful to add likely/unlikely
macros.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek 13851966da microblaze: Add .type and .size to ASM functions
Cachegrind analysis need this fix to be able to log asm functions.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek e84452dd9f microblaze: Fix TLB macros
To be able to do trace TLB operations.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek 3765d6958d microblaze: Use instruction with delay slot
Sync labels.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00
Michal Simek bd1637d63e microblaze: Remove additional resr and rear loading
RESR and REAR uses the same regs in whole file.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00