Commit Graph

11048 Commits

Author SHA1 Message Date
Johannes Berg 10bab00afe cfg80211: deprecate CFG80211_WEXT
Almost all wireless tools have transitioned to
or at least added compatibility with nl80211 so
there's no real need for CONFIG_CFG80211_WEXT
any more. Mark it for removal, and also change
the default to not be enabled.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05 15:32:15 -04:00
Johannes Berg 35b2a113cb wireless: remove wext sysfs
The only user of this was hal prior to its 0.5.12
release which happened over two years ago, so I'm
sure this can be removed without issues.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05 15:32:15 -04:00
Linus Torvalds 912afc3616 Improve multipath's retrying mechanism in some defined circumstances
and provide a simple reserve/release mechanism for userspace tools to
 access thin provisioning metadata while the pool is in use.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPyqIdAAoJEK2W1qbAHj1nSPoQAJvAb/6UHufTWC/lufbEyo7t
 ft6uwZZ4S/VV1Gdx8V5YXo3rxkVIZj/CV0hiJIDctmDMKGPMlzup39kCgjD/rOUF
 mzcFAE8sEr3QEavkfjSWw2RHIIlhnJpvqVnb8nu3p/mSgAB4qYGgaDjBpi+W60PV
 aqQSSWgwH1uNhfGDBIxQoJ8OIjjYvKPIf2Ir2FAXam/dNi9chWO9nzFdj3q2LccP
 nZir094BDsFac1BF0FYW3J+rgT1FfPO7RRGAQct6WNJ197IZlYWYjKH3XehxnUHE
 wgiJmjfUO8vrho1hhWmWDOesKJPPWFN67EQnl5FqAu9itP7c7k8bd7Ay4jWgtZQU
 QIx10uiAgAuFUmTdWGK1fLlE8HGKUFINYLp63N5n5NZ4TDJrgo8e7CIID3rvYf/O
 EtmL7HzAyztL9Uc6oaXzCK6TgMUtd/ht8OJCDFhjitzQTNjbrfAGz6m+RHnEZyyj
 dtOVK7WBlmuKEANl2vDFGuVVF0+MwJLTlvPx1/b/ejFvnHI/R5Wuk9EH7t/DO4LB
 nCmiwzB6uWMzU3y3vnZG72AYSF5NTKSvnAl5B8U/0rI1MZU+6PehjeviJNx6ddJN
 2YheHBLU4vbBV/LF4XIpaHK2aiHN1ltaKCp8INo3EKhCwpR4ZdlVvnAGU9ocf9+c
 qoaFTOP7zGD9zgPeGjoG
 =wCpY
 -----END PGP SIGNATURE-----

Merge tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm

Pull device-mapper updates from Alasdair G Kergon:
 "Improve multipath's retrying mechanism in some defined circumstances
  and provide a simple reserve/release mechanism for userspace tools to
  access thin provisioning metadata while the pool is in use."

* tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm thin: provide userspace access to pool metadata
  dm thin: use slab mempools
  dm mpath: allow ioctls to trigger pg init
  dm mpath: delay retry of bypassed pg
  dm mpath: reduce size of struct multipath
2012-06-02 17:39:40 -07:00
Joe Thornber cc8394d86f dm thin: provide userspace access to pool metadata
This patch implements two new messages that can be sent to the thin
pool target allowing it to take a snapshot of the _metadata_.  This,
read-only snapshot can be accessed by userland, concurrently with the
live target.

Only one metadata snapshot can be held at a time.  The pool's status
line will give the block location for the current msnap.

Since version 0.1.5 of the userland thin provisioning tools, the
thin_dump program displays the msnap as follows:

    thin_dump -m <msnap root> <metadata dev>

Available here: https://github.com/jthornber/thin-provisioning-tools

Now that userland can access the metadata we can do various things
that have traditionally been kernel side tasks:

     i) Incremental backups.

     By using metadata snapshots we can work out what blocks have
     changed over time.  Combined with data snapshots we can ensure
     the data doesn't change while we back it up.

     A short proof of concept script can be found here:

     https://github.com/jthornber/thinp-test-suite/blob/master/incremental_backup_example.rb

     ii) Migration of thin devices from one pool to another.

     iii) Merging snapshots back into an external origin.

     iv) Asyncronous replication.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-03 00:30:01 +01:00
Linus Torvalds 63004afa71 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull straggler x86 fixes from Peter Anvin:
 "Three groups of patches:

  - EFI boot stub documentation and the ability to print error messages;
  - Removal for PTRACE_ARCH_PRCTL for x32 (obsolete interface which
    should never have been ported, and the port is broken and
    potentially dangerous.)
  - ftrace stack corruption fixes.  I'm not super-happy about the
    technical implementation, but it is probably the least invasive in
    the short term.  In the future I would like a single method for
    nesting the debug stack, however."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, x32, ptrace: Remove PTRACE_ARCH_PRCTL for x32
  x86, efi: Add EFI boot stub documentation
  x86, efi; Add EFI boot stub console support
  x86, efi: Only close open files in error path
  ftrace/x86: Do not change stacks in DEBUG when calling lockdep
  x86: Allow nesting of the debug stack IDT setting
  x86: Reset the debug_stack update counter
  ftrace: Use breakpoint method to update ftrace caller
  ftrace: Synchronize variable setting with breakpoints
2012-06-02 16:17:03 -07:00
Linus Torvalds 804ce9866d fbdev updates for 3.5
It includes:
 - driver for AUO-K1900 and AUO-K1901 epaper controller
 - large updates for OMAP (e.g. decouple HDMI audio and video)
 - some updates for Exynos and SH Mobile
 - various other small fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPyAhmAAoJECSVL5KnPj1PBcoQAIWftuoXo3sk94f5jKcV4Ucx
 MthEc5iEpMVs8xaEruHHNHXWv8ic0x/PfdC2xrpKOEbNXQcNPlb/QE2xWmBRxmT1
 ucDyu10HJ36jKcwcK4ra5IQwOW+GtbTBEoBZT+WNAjxHZtJmxzjQGM4C12zVQpdJ
 +qV2RP93JmsJoVBL9aKVAg1Ko135LLfD8TcKd+z8TmgFnLfSwKhfl7Jtd2xXwyvz
 /hmW3kJUEnD8E5wuj+/g8sKJhQkGalEiITTqG2j2vJyFgxHSqyLSw8BBixrFW1uT
 B9VnZsHF35ccCo+96UZRH4QsGJTx08+rea/qsv8IMSGczyRp5ey1ufjL+CzKiiIN
 FWfex6fY0HHqZGAopQhjag54e914SIbSxdBwWS/iRrtVt3e9d03BzkhYs4rXl4Ey
 CTC5obzWNTbQ6hLEjgWfVKkKcrF56BnRn3zGPgCTKGp2NK3vODdBkt/EmzUFvCWR
 CcyQhh+PvZzEWp3XsdOGossYs/0aP4bO+7XPGJxZaa3+WVcRaZwAG/uZvJXXBfnp
 DGRFy4wPsTTwKYIx4+t/KrsLtNVKioSMS5GEtuM1YEb8pA7mkUIkqwJv1I261h58
 heTr6vWUsviUqHlKALJ+1CdwWGr3CtktCZssGsSUri61nm8CvlSRn2Nr2aJ/L3RN
 AkemC/33RE5X/+lfkdMx
 =tmIU
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6

Pull fbdev updates from Florian Tobias Schandinat:
 - driver for AUO-K1900 and AUO-K1901 epaper controller
 - large updates for OMAP (e.g. decouple HDMI audio and video)
 - some updates for Exynos and SH Mobile
 - various other small fixes and cleanups

* tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6: (130 commits)
  video: bfin_adv7393fb: Fix cleanup code
  video: exynos_dp: reduce delay time when configuring video setting
  video: exynos_dp: move sw reset prioir to enabling sw defined function
  video: exynos_dp: use devm_ functions
  fb: handle NULL pointers in framebuffer release
  OMAPDSS: HDMI: OMAP4: Update IRQ flags for the HPD IRQ request
  OMAPDSS: Apply VENC timings even if panel is disabled
  OMAPDSS: VENC/DISPC: Delay dividing Y resolution for managers connected to VENC
  OMAPDSS: DISPC: Support rotation through TILER
  OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n
  OMAPFB: remove compiler warnings when CONFIG_BUG=n
  OMAPDSS: remove compiler warnings when CONFIG_BUG=n
  OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv
  OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays
  OMAPDSS: DSI: Support command mode interleaving during video mode blanking periods
  OMAPDSS: DISPC: Update Accumulator configuration for chroma plane
  drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers
  video: exynos mipi dsi: support reverse panel type
  video: exynos mipi dsi: Properly interpret the interrupt source flags
  video: exynos mipi dsi: Avoid races in probe()
  ...
2012-06-01 16:57:51 -07:00
Linus Torvalds f5e7e844a5 - More robust parsing especially of xattr data in JFFS2
- Updates to mxc_nand and gpmi drivers to support new boards and device tree
  - Improve consistency of information about ECC strength in NAND devices
  - Clean up partition handling of plat_nand
  - Support NAND drivers without dedicated access to OOB area
  - BCH hardware ECC support for OMAP
  - Other fixes and cleanups, and a few new device IDs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iEYEABECAAYFAk/JG1wACgkQdwG7hYl686M80wCglN4kutx20j+KJWuZofkr9Hog
 weEAoI4jrqEWEdW9EcT2CIWQw7eG+1v+
 =7tdo
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd

Pull mtd update from David Woodhouse:
 - More robust parsing especially of xattr data in JFFS2
 - Updates to mxc_nand and gpmi drivers to support new boards and device tree
 - Improve consistency of information about ECC strength in NAND devices
 - Clean up partition handling of plat_nand
 - Support NAND drivers without dedicated access to OOB area
 - BCH hardware ECC support for OMAP
 - Other fixes and cleanups, and a few new device IDs

Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to
added include files next to each other.

* tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits)
  mtd: mxc_nand: move ecc strengh setup before nand_scan_tail
  mtd: block2mtd: fix recursive call of mtd_writev
  mtd: gpmi-nand: define ecc.strength
  mtd: of_parts: fix breakage in Kconfig
  mtd: nand: fix scan_read_raw_oob
  mtd: docg3 fix in-middle of blocks reads
  mtd: cfi_cmdset_0002: Slight cleanup of fixup messages
  mtd: add fixup for S29NS512P NOR flash.
  jffs2: allow to complete xattr integrity check on first GC scan
  jffs2: allow to discriminate between recoverable and non-recoverable errors
  mtd: nand: omap: add support for hardware BCH ecc
  ARM: OMAP3: gpmc: add BCH ecc api and modes
  mtd: nand: check the return code of 'read_oob/read_oob_raw'
  mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'
  mtd: m25p80: Add support for Winbond W25Q80BW
  jffs2: get rid of jffs2_sync_super
  jffs2: remove unnecessary GC pass on sync
  jffs2: remove unnecessary GC pass on umount
  jffs2: remove lock_super
  mtd: gpmi: add gpmi support for mx6q
  ...
2012-06-01 16:55:42 -07:00
Linus Torvalds af4f8ba31a Merge branch 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux
Pull slab updates from Pekka Enberg:
 "Mainly a bunch of SLUB fixes from Joonsoo Kim"

* 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  slub: use __SetPageSlab function to set PG_slab flag
  slub: fix a memory leak in get_partial_node()
  slub: remove unused argument of init_kmem_cache_node()
  slub: fix a possible memory leak
  Documentations: Fix slabinfo.c directory in vm/slub.txt
  slub: fix incorrect return type of get_any_partial()
2012-06-01 16:50:23 -07:00
Linus Torvalds 1193755ac6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs changes from Al Viro.
 "A lot of misc stuff.  The obvious groups:
   * Miklos' atomic_open series; kills the damn abuse of
     ->d_revalidate() by NFS, which was the major stumbling block for
     all work in that area.
   * ripping security_file_mmap() and dealing with deadlocks in the
     area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in
     general.
   * ->encode_fh() switched to saner API; insane fake dentry in
     mm/cleancache.c gone.
   * assorted annotations in fs (endianness, __user)
   * parts of Artem's ->s_dirty work (jff2 and reiserfs parts)
   * ->update_time() work from Josef.
   * other bits and pieces all over the place.

  Normally it would've been in two or three pull requests, but
  signal.git stuff had eaten a lot of time during this cycle ;-/"

Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the
'truncate_range' inode method was removed by the VM changes, the VFS
update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due
to sparse fix added twice, with other changes nearby).

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits)
  nfs: don't open in ->d_revalidate
  vfs: retry last component if opening stale dentry
  vfs: nameidata_to_filp(): don't throw away file on error
  vfs: nameidata_to_filp(): inline __dentry_open()
  vfs: do_dentry_open(): don't put filp
  vfs: split __dentry_open()
  vfs: do_last() common post lookup
  vfs: do_last(): add audit_inode before open
  vfs: do_last(): only return EISDIR for O_CREAT
  vfs: do_last(): check LOOKUP_DIRECTORY
  vfs: do_last(): make ENOENT exit RCU safe
  vfs: make follow_link check RCU safe
  vfs: do_last(): use inode variable
  vfs: do_last(): inline walk_component()
  vfs: do_last(): make exit RCU safe
  vfs: split do_lookup()
  Btrfs: move over to use ->update_time
  fs: introduce inode operation ->update_time
  reiserfs: get rid of resierfs_sync_super
  reiserfs: mark the superblock as dirty a bit later
  ...
2012-06-01 10:34:35 -07:00
Matt Fleming 0c7596621e x86, efi: Add EFI boot stub documentation
Since we can't expect every user to read the EFI boot stub code it
seems prudent to have a couple of paragraphs explaining what it is and
how it works.

The "initrd=" option in particular is tricky because it only
understands absolute EFI-style paths (backslashes as directory
separators), and until now this hasn't been documented anywhere. This
has tripped up a couple of users.

Cc: Matthew Garrett <mjg@redhat.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/1331907517-3985-4-git-send-email-matt@console-pimps.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-01 09:11:41 -07:00
Josef Bacik c3b2da3148 fs: introduce inode operation ->update_time
Btrfs has to make sure we have space to allocate new blocks in order to modify
the inode, so updating time can fail.  We've gotten around this by having our
own file_update_time but this is kind of a pain, and Christoph has indicated he
would like to make xfs do something different with atime updates.  So introduce
->update_time, where we will deal with i_version an a/m/c time updates and
indicate which changes need to be made.  The normal version just does what it
has always done, updates the time and marks the inode dirty, and then
filesystems can choose to do something different.

I've gone through all of the users of file_update_time and made them check for
errors with the exception of the fault code since it's complicated and I wasn't
quite sure what to do there, also Jan is going to be pushing the file time
updates into page_mkwrite for those who have it so that should satisfy btrfs and
make it not a big deal to check the file_update_time() return code in the
generic fault path. Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-01 12:07:25 -04:00
Linus Torvalds 08615d7d85 Merge branch 'akpm' (Andrew's patch-bomb)
Merge misc patches from Andrew Morton:

 - the "misc" tree - stuff from all over the map

 - checkpatch updates

 - fatfs

 - kmod changes

 - procfs

 - cpumask

 - UML

 - kexec

 - mqueue

 - rapidio

 - pidns

 - some checkpoint-restore feature work.  Reluctantly.  Most of it
   delayed a release.  I'm still rather worried that we don't have a
   clear roadmap to completion for this work.

* emailed from Andrew Morton <akpm@linux-foundation.org>: (78 patches)
  kconfig: update compression algorithm info
  c/r: prctl: add ability to set new mm_struct::exe_file
  c/r: prctl: extend PR_SET_MM to set up more mm_struct entries
  c/r: procfs: add arg_start/end, env_start/end and exit_code members to /proc/$pid/stat
  syscalls, x86: add __NR_kcmp syscall
  fs, proc: introduce /proc/<pid>/task/<tid>/children entry
  sysctl: make kernel.ns_last_pid control dependent on CHECKPOINT_RESTORE
  aio/vfs: cleanup of rw_copy_check_uvector() and compat_rw_copy_check_uvector()
  eventfd: change int to __u64 in eventfd_signal()
  fs/nls: add Apple NLS
  pidns: make killed children autoreap
  pidns: use task_active_pid_ns in do_notify_parent
  rapidio/tsi721: add DMA engine support
  rapidio: add DMA engine support for RIO data transfers
  ipc/mqueue: add rbtree node caching support
  tools/selftests: add mq_perf_tests
  ipc/mqueue: strengthen checks on mqueue creation
  ipc/mqueue: correct mq_attr_ok test
  ipc/mqueue: improve performance of send/recv
  selftests: add mq_open_tests
  ...
2012-05-31 18:10:18 -07:00
Cyrill Gorcunov 5b172087f9 c/r: procfs: add arg_start/end, env_start/end and exit_code members to /proc/$pid/stat
We would like to have an ability to restore command line arguments and
program environment pointers but first we need to obtain them somehow.
Thus we put these values into /proc/$pid/stat.  The exit_code is needed to
restore zombie tasks.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:32 -07:00
Cyrill Gorcunov 818411616b fs, proc: introduce /proc/<pid>/task/<tid>/children entry
When we do checkpoint of a task we need to know the list of children the
task, has but there is no easy and fast way to generate reverse
parent->children chain from arbitrary <pid> (while a parent pid is
provided in "PPid" field of /proc/<pid>/status).

So instead of walking over all pids in the system (creating one big
process tree in memory, just to figure out which children a task has) --
we add explicit /proc/<pid>/task/<tid>/children entry, because the kernel
already has this kind of information but it is not yet exported.

This is a first level children, not the whole process tree.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:32 -07:00
KOSAKI Motohiro cef0184c11 mqueue: separate mqueue default value from maximum value
Commit b231cca438 ("message queues: increase range limits") changed
mqueue default value when attr parameter is specified NULL from hard
coded value to fs.mqueue.{msg,msgsize}_max sysctl value.

This made large side effect.  When user need to use two mqueue
applications 1) using !NULL attr parameter and it require big message
size and 2) using NULL attr parameter and only need small size message,
app (1) require to raise fs.mqueue.msgsize_max and app (2) consume large
memory size even though it doesn't need.

Doug Ledford propsed to switch back it to static hard coded value.
However it also has a compatibility problem.  Some applications might
started depend on the default value is tunable.

The solution is to separate default value from maximum value.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Acked-by: Joe Korty <joe.korty@ccur.com>
Cc: Amerigo Wang <amwang@redhat.com>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:31 -07:00
Konstantin Khlebnikov 052fb0d635 proc: report file/anon bit in /proc/pid/pagemap
This is an implementation of Andrew's proposal to extend the pagemap file
bits to report what is missing about tasks' working set.

The problem with the working set detection is multilateral.  In the criu
(checkpoint/restore) project we dump the tasks' memory into image files
and to do it properly we need to detect which pages inside mappings are
really in use.  The mincore syscall I though could help with this did not.
 First, it doesn't report swapped pages, thus we cannot find out which
parts of anonymous mappings to dump.  Next, it does report pages from page
cache as present even if they are not mapped, and it doesn't make that has
not been cow-ed.

Note, that issue with swap pages is critical -- we must dump swap pages to
image file.  But the issues with file pages are optimization -- we can
take all file pages to image, this would be correct, but if we know that a
page is not mapped or not cow-ed, we can remove them from dump file.  The
dump would still be self-consistent, though significantly smaller in size
(up to 10 times smaller on real apps).

Andrew noticed, that the proc pagemap file solved 2 of 3 above issues --
it reports whether a page is present or swapped and it doesn't report not
mapped page cache pages.  But, it doesn't distinguish cow-ed file pages
from not cow-ed.

I would like to make the last unused bit in this file to report whether the
page mapped into respective pte is PageAnon or not.

[comment stolen from Pavel Emelyanov's v1 patch]

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:29 -07:00
Xi Wang 15837294d4 CodingStyle: add kmalloc_array() to memory allocators
Add the new kmalloc_array() to the list of general-purpose memory
allocators in chapter 14.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Acked-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:26 -07:00
Linus Torvalds 76f901eb46 A bunch of fixes for v3.5, nothing extraordinary.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPxr4VAAoJEGgI9fZJve1bmOkP/R+hVC0lHRzbevDiDXVzxx+M
 XNG3krM73Y6jC9sdIxUj5wU1/BpQ3z6wYNEKKPKeXJoHPW+UJaN+wjhm6+uYQPx/
 6QM7Fkraxcya98I7vKIsz+uVRd9vETMBvgrix6hZ/ec8xO9q62d5ozkXjfG3E4qO
 3vUFSihGmeVVGES1BFehIMkLEHRqlEuiUsXwMw71cBaIYATXruzy46iRqS9e3fVS
 mLc5+Ylvsm9q65wY1djv2Kieq5AuZ1dOgH8du2FYWJED+vogkqRcZTWeJeuZ3HAc
 ql72WhN2ga2U+xuxypVt+mVl2Gb1pjfE1j802EDjZX6ir1E50iSWpcaKIM1M8th7
 kZwCvzcMihtzBaKvZjXf1IVazZyBo8Chi02YNbG3UVWW/rSrYjV9GSSh5HPKfY3A
 Arw80C4t/I3kiCPr5uwdZZO/D5lsleMF677NEilTmsKZgPSOe9EqbZOTOGPKuALj
 A/y2SVCV0sPVb2ki8wYlQ5dpNRsz/Uya+I3cqRFW63YGeSyGHm8VysxWRjzzu6LN
 +n7I2q/3Un95aHGMMIoJ/3crHcdtKSqtXeBKbBSiRdRpyO4b4rVRkLJRARv36V7m
 eiaduSZJEf5ZrEb3z20FmM2SqjiFHz+d0Q1QH6MQmhwDQ44acKxx/iw6moxGtLTQ
 JsDneVe+4d3WlJFqXd3s
 =B6u0
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.5' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "A bunch of fixes for v3.5, nothing extraordinary."

* tag 'for-v3.5' of git://git.infradead.org/battery-2.6: (27 commits)
  smb347-charger: Include missing <linux/err.h>
  smb347-charger: Clean up battery attributes
  max17042_battery: Add support for max17047/50 chip
  sbs-battery.c: Capacity attr = remaining relative capacity
  isp1704_charger: Use after free on probe error
  ds2781_battery: Use DS2781_PARAM_EEPROM_SIZE and DS2781_USER_EEPROM_SIZE
  power_supply: Fix a typo in BATTERY_DS2781 Kconfig entry
  charger-manager: Provide cm_notify_event function for in-kernel use
  charger-manager: Poll battery health in normal state
  smb347-charger: Convert to regmap API
  smb347-charger: Move IRQ enabling to the end of probe
  smb347-charger: Rename few functions to match better what they are doing
  smb347-charger: Convert to use module_i2c_driver()
  smb347_charger: Cleanup power supply registration code in probe
  ab8500: Clean up probe routines
  ab8500_fg: Harden platform data check
  ab8500_btemp: Harden platform data check
  ab8500_charger: Harden platform data check
  MAINTAINERS: Fix 'F' entry for the power supply class
  max17042_battery: Handle irq request failure case
  ...
2012-05-31 12:10:15 -07:00
Linus Torvalds 054552272e SCSI misc on 20120531
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPx1M+AAoJEDeqqVYsXL0MNOMH/jSbgDAHQskBuZMCEoVUHykZ
 3aKiPFJQfnF1nQqN/xxECGFc7glrKSHv1fpAG9wDk0HLHNhP+QoOBVYdDGHpzktk
 eP1hB6rWE/auJz90rIrKomJoD+cVYDRHkhlbNr1DsYBuXI+BGX0aUp+uAaajoxAT
 8wp4/Z5007llQQXnep2Z0AvzIWBdCeR4PBXX5YvalJ8Qz3Rj8bYeY10oDpx6nO7v
 iGcyh+h0Eo+q9KEQ3PosoDnqaskq44yTY4MWeE1Kd64fQM1JYTJo0SxOGGVxHHwQ
 ZLfhX+fH3jCyBP0qRzCqBvSKTuiWeMBc8POdLbLMnq6ClCgQTr41iHH7UTuXXjE=
 =fZOy
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull final round of SCSI updates from James Bottomley:
 "This is primarily another round of driver updates (bnx2fc, qla2xxx,
  qla4xxx) including the target mode driver for qla2xxx.  We've also got
  a couple of regression fixes (async scanning, broken this merge window
  and a fix to a long standing break in the scsi_wait_scan module)."

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (45 commits)
  [SCSI] fix scsi_wait_scan
  [SCSI] fix async probe regression
  [SCSI] be2iscsi: fix dma free size mismatch regression
  [SCSI] qla4xxx: Update driver version to 5.02.00-k17
  [SCSI] qla4xxx: Capture minidump for ISP82XX on firmware failure
  [SCSI] qla4xxx: Add change_queue_depth API support
  [SCSI] qla4xxx: Fix clear ddb mbx command failure issue.
  [SCSI] qla4xxx: Fix kernel panic during discovery logout.
  [SCSI] qla4xxx: Correct early completion of pending mbox.
  [SCSI] fcoe, bnx2fc, libfcoe: SW FCoE and bnx2fc use FCoE Syfs
  [SCSI] libfcoe: Add fcoe_sysfs
  [SCSI] bnx2fc: Allocate fcoe_ctlr with bnx2fc_interface, not as a member
  [SCSI] fcoe: Allocate fcoe_ctlr with fcoe_interface, not as a member
  [SCSI] Fix dm-multipath starvation when scsi host is busy
  [SCSI] ufs: fix potential NULL pointer dereferencing error in ufshcd_prove.
  [SCSI] qla2xxx: don't free pool that wasn't allocated
  [SCSI] mptfusion: unlock on error in mpt_config()
  [SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core
  [SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series
  [SCSI] Revert "qla2xxx: During loopdown perform Diagnostic loopback."
  ...
2012-05-31 12:02:41 -07:00
Linus Torvalds 5b461209d0 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull follow-up block updates from Jens Axboe:
 "Includes the fix from Eric to resolve the infinite loop in looking up
  or creating an IO context for an exiting task.

  Also a bunch of mtip32xx patches.  Fairly trivial stuff.  It's fairly
  new though, but no point in keeping it out of the tree until 3.6 imho.
  I've thrown it through basic testing locally as well, works fine.  The
  one contentious part is the patch that Greg complained about (sysfs
  file with multiple values, should be a debugfs file), which is
  perfectly valid, but not a regression from what the file contains now.
  That will be fixed up separately."

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: avoid infinite loop in get_task_io_context()
  mtip32xx: Changes to sysfs entries
  mtip32xx: Convert macro definitions for flag bits to enum
  mtip32xx: minor performance tweak
  mtip32xx: Fix to support more than one sector in exec_drive_command()
  mtip32xx: Use plain spinlock for 'cmd_issue_lock'
  mtip32xx: Set block queue boundary variables
  mtip32xx: Fix to handle TFE for PIO(IOCTL/internal) commands
  mtip32xx: Change HDIO_GET_IDENTITY to return stored data
  mtip32xx: Set custom timeouts for PIO commands
  mtip32xx: fix clearing an incorrect register in mtip_init_port
2012-05-31 12:00:09 -07:00
Linus Torvalds 13199a0845 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking changes from David S. Miller:

 1) Fix IPSEC header length calculation for transport mode in ESP.  The
    issue is whether to do the calculation before or after alignment.
    Fix from Benjamin Poirier.

 2) Fix regression in IPV6 IPSEC fragment length calculations, from Gao
    Feng.  This is another transport vs tunnel mode issue.

 3) Handle AF_UNSPEC connect()s properly in L2TP to avoid OOPSes.  Fix
    from James Chapman.

 4) Fix USB ASIX driver's reception of full sized VLAN packets, from
    Eric Dumazet.

 5) Allow drop monitor (and, more generically, all generic netlink
    protocols) to be automatically loaded as a module.  From Neil
    Horman.

Fix up trivial conflict in Documentation/feature-removal-schedule.txt
due to new entries added next to each other at the end. As usual.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
  net/smsc911x: Repair broken failure paths
  virtio-net: remove useless disable on freeze
  netdevice: Update netif_dbg for CONFIG_DYNAMIC_DEBUG
  drop_monitor: Add module alias to enable automatic module loading
  genetlink: Build a generic netlink family module alias
  net: add MODULE_ALIAS_NET_PF_PROTO_NAME
  r6040: Do a Proper deinit at errorpath and also when driver unloads (calling r6040_remove_one)
  r6040: disable pci device if the subsequent calls (after pci_enable_device) fails
  skb: avoid unnecessary reallocations in __skb_cow
  net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens
  asix: allow full size 8021Q frames to be received
  rds_rdma: don't assume infiniband device is PCI
  l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case
  mac80211: fix ADDBA declined after suspend with wowlan
  wlcore: fix undefined symbols when CONFIG_PM is not defined
  mac80211: fix flag check for QoS NOACK frames
  ath9k_hw: apply internal regulator settings on AR933x
  ath9k_hw: update AR933x initvals to fix issues with high power devices
  ath9k: fix a use-after-free-bug when ath_tx_setup_buffer() fails
  ath9k: stop rx dma before stopping tx
  ...
2012-05-31 10:32:36 -07:00
Asai Thambi S P b77874c969 mtip32xx: Changes to sysfs entries
* Formatted the output of 'registers' entry
* Added "Commands in Q' to output of 'registers' entry
* Added a new entry 'flags'

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-05-31 08:46:50 +02:00
Linus Torvalds af56e0aa35 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull ceph updates from Sage Weil:
 "There are some updates and cleanups to the CRUSH placement code, a bug
  fix with incremental maps, several cleanups and fixes from Josh Durgin
  in the RBD block device code, a series of cleanups and bug fixes from
  Alex Elder in the messenger code, and some miscellaneous bounds
  checking and gfp cleanups/fixes."

Fix up trivial conflicts in net/ceph/{messenger.c,osdmap.c} due to the
networking people preferring "unsigned int" over just "unsigned".

* git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (45 commits)
  libceph: fix pg_temp updates
  libceph: avoid unregistering osd request when not registered
  ceph: add auth buf in prepare_write_connect()
  ceph: rename prepare_connect_authorizer()
  ceph: return pointer from prepare_connect_authorizer()
  ceph: use info returned by get_authorizer
  ceph: have get_authorizer methods return pointers
  ceph: ensure auth ops are defined before use
  ceph: messenger: reduce args to create_authorizer
  ceph: define ceph_auth_handshake type
  ceph: messenger: check return from get_authorizer
  ceph: messenger: rework prepare_connect_authorizer()
  ceph: messenger: check prepare_write_connect() result
  ceph: don't set WRITE_PENDING too early
  ceph: drop msgr argument from prepare_write_connect()
  ceph: messenger: send banner in process_connect()
  ceph: messenger: reset connection kvec caller
  libceph: don't reset kvec in prepare_write_banner()
  ceph: ignore preferred_osd field
  ceph: fully initialize new layout
  ...
2012-05-30 11:17:19 -07:00
Linus Torvalds 42fe55ce90 Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull i2c updates from Jean Delvare.

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Split I2C_M_NOSTART support out of I2C_FUNC_PROTOCOL_MANGLING
  i2c-dev: Add support for I2C_M_RECV_LEN
2012-05-30 10:03:46 -07:00
Linus Torvalds 19ce0a995f Merge git://www.linux-watchdog.org/linux-watchdog
Pull second set of watchdog updates from Wim Van Sebroeck:
 "This changeset contains following changes:
   * Add support for multiple watchdog devices.  We use dynamically
     allocated device id's for this.
   * Add locking into the generic watchdog infrastructure.
   * Add support for dynamically allocated watchdog_device structs so
     that we can deal with devices that get unbound.
   * convert following drivers to the generic watchdog framework:
     sch5627, sch5636 and sp805_wdt.
   * Add DA9052/53 PMIC watchdog support
   * Fix printk format warnings for iTCO_wdt.c"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: iTCO_wdt.c: fix printk format warnings
  watchdog: sp805_wdt: Add clk_{un}prepare support
  watchdog: sp805_wdt: convert to watchdog core
  hwmon/sch56xx: Depend on watchdog for watchdog core functions
  watchdog: sch56xx-common: set correct bits in register()
  Watchdog: DA9052/53 PMIC watchdog support
  watchdog: sch56xx-common: Add proper ref-counting of watchdog data
  watchdog: sch56xx: Remove unnecessary checks for register changes
  watchdog: sch56xx: Use watchdog core
  watchdog: Add support for dynamically allocated watchdog_device structs
  watchdog: Add Locking support
  watchdog: watchdog_dev: Rewrite wrapper code
  watchdog: use dev_ functions
  watchdog: create all the proper device files
  watchdog: Add a flag to indicate the watchdog doesn't reboot things
  watchdog: Add multiple device support
  watchdog: watchdog_core.h: make functions extern
  watchdog: correct the name of the watchdog_core inlude file
  watchdog: Add watchdog_active() routine
  watchdog: watchdog_dev: include private header to pickup global symbol prototypes
2012-05-30 09:59:13 -07:00
Linus Torvalds 2f83766d4b IOMMU Updates for Linux 3.5
Not much stuff this time. The only change to the IOMMU core code is the
 addition of a handle to the fault handling code. A few updates to the
 AMD IOMMU driver to work around new errata. The other patches are mostly
 fixes and enhancements to the existing ARM IOMMU drivers and
 documentation updates.
 
 A new IOMMU driver for the Exynos platform was also underway but got
 merged via the Samsung tree and is not part of this tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPxfseAAoJECvwRC2XARrjvL4QAL39988y7ajHSI3ym3Dxovn9
 w8md63xKNlTpCB8NJPRIJpcGrE7QFtNXPFCagTqO713ulwCoKayEwKGOU7VQagFc
 0/JoHxE5usE5OuA6tyAJbpWK10kWKDzu6HjZfqF2yoa0q/REbsu65KsY7zc7HbpF
 qEAXX1xr9IC7GUM7gv75OR8CP2VJCW3+6VyhiD/37t3KpNwINMpRDO/eN/KiwoUI
 1t+/DVwO6pH5UrGReWrmjs/gcxFMzkeelt+iCA32kzkWLtyWjeWBujVWnFvVtpkz
 R4pV2T2jvs6fWPU5MMBXZRd5AvLLqcu/g/Yr21WYHz07jCcGxlCUp9qpnGLt2el0
 /YTY3LBZUQJ5sx3OSJV+oQVTtI5x0EkAiOrJ8Dx20wNAFqun9bhJb1WX0IXflmZc
 oC7SF5wjXq8pUQmX/wpGMbW7XYompypJGqlEsftJEytf4dfR6KJ2Vo1h3pHtpaex
 IaY6TqmdW44e0EgbFTM7RMNFtC7GrIY9NE+WKlrFtsHhUFrqt1NVBEcO3faU0ES6
 UAguFRPM/HAdkVmY620+DUT/JkEMemWq2jgWExLGLC9gI8L1Xj2cdU8esstuMUoV
 GGG4u9a5W1rALwg+zPCQGoVxPKmd6fpeC3U+Rmg2639chy+h4c/cBXkzfUsxe2lg
 wvMDVbjDN1Fz0c29YJit
 =K23I
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "Not much stuff this time.  The only change to the IOMMU core code is
  the addition of a handle to the fault handling code.  A few updates to
  the AMD IOMMU driver to work around new errata.  The other patches are
  mostly fixes and enhancements to the existing ARM IOMMU drivers and
  documentation updates.

  A new IOMMU driver for the Exynos platform was also underway but got
  merged via the Samsung tree and is not part of this tree."

* tag 'iommu-updates-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  Documentation: kernel-parameters.txt Add amd_iommu_dump
  iommu/core: pass a user-provided token to fault handlers
  iommu/tegra: gart: Fix register offset correctly
  iommu: OMAP: device detach on domain destroy
  iommu: tegra/gart: Add device tree support
  iommu: tegra/gart: use correct gart_device
  iommu/tegra: smmu: Print device name correctly
  iommu/amd: Add workaround for event log erratum
  iommu/amd: Check for the right TLP prefix bit
  dma-debug: release free_entries_lock before saving stack trace
2012-05-30 08:49:28 -07:00
Joerg Roedel 28f8571e1e Merge branches 'iommu/fixes', 'dma-debug', 'arm/omap', 'arm/tegra', 'core' and 'x86/amd' into next 2012-05-30 12:41:29 +02:00
Shuah Khan c099cf1731 Documentation: kernel-parameters.txt Add amd_iommu_dump
Add amd_iommu_dump to kernel-parameters.txt

Signed-off-by: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-05-30 12:39:27 +02:00
Mark Brown 14674e7011 i2c: Split I2C_M_NOSTART support out of I2C_FUNC_PROTOCOL_MANGLING
Since there are uses for I2C_M_NOSTART which are much more sensible and
standard than most of the protocol mangling functionality (the main one
being gather writes to devices where something like a register address
needs to be inserted before a block of data) create a new I2C_FUNC_NOSTART
for this feature and update all the users to use it.

Also strengthen the disrecommendation of the protocol mangling while we're
at it.

In the case of regmap-i2c we remove the requirement for mangling as
I2C_M_NOSTART is the only mangling feature which is being used.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-05-30 10:55:34 +02:00
Ashish Jangam 664a0d7862 Watchdog: DA9052/53 PMIC watchdog support
This driver adds support for the watchdog functionality provided by
the Dialog Semiconductor DA9052 PMIC chip.

Tested on samsung smdkv6410 and i.mx53 QS boards.

Signed-off-by: Anthony Olech <Anthony.Olech@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30 07:56:12 +02:00
Hans de Goede e907df3272 watchdog: Add support for dynamically allocated watchdog_device structs
If a driver's watchdog_device struct is part of a dynamically allocated
struct (which it often will be), merely locking the module is not enough,
even with a drivers module locked, the driver can be unbound from the device,
examples:
1) The root user can unbind it through sysfd
2) The i2c bus master driver being unloaded for an i2c watchdog

I will gladly admit that these are corner cases, but we still need to handle
them correctly.

The fix for this consists of 2 parts:
1) Add ref / unref operations, so that the driver can refcount the struct
   holding the watchdog_device struct and delay freeing it until any
   open filehandles referring to it are closed
2) Most driver operations will do IO on the device and the driver should not
   do any IO on the device after it has been unbound. Rather then letting each
   driver deal with this internally, it is better to ensure at the watchdog
   core level that no operations (other then unref) will get called after
   the driver has called watchdog_unregister_device(). This actually is the
   bulk of this patch.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30 07:55:31 +02:00
Hans de Goede f4e9c82f64 watchdog: Add Locking support
This patch fixes some potential multithreading issues, despite only
allowing one process to open the /dev/watchdog device, we can still get
called multiple times at the same time, since a program could be using thread,
or could share the fd after a fork.

This causes 2 potential problems:
1) watchdog_start / open do an unlocked test_n_set / test_n_clear,
   if these 2 race, the watchdog could be stopped while the active
   bit indicates it is running or visa versa.

2) Most watchdog_dev drivers probably assume that only one
   watchdog-op will get called at a time, this is not necessary
   true atm.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30 07:55:23 +02:00
Alan Cox d6b469d915 watchdog: create all the proper device files
Create the watchdog class and it's associated devices.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30 07:54:46 +02:00
Alan Cox 45f5fed30a watchdog: Add multiple device support
We keep the old /dev/watchdog interface file for the first watchdog via
miscdev. This is basically a cut and paste of the relevant interface code
from the rtc driver layer tweaked for watchdog.

Revised to fix problems noted by Hans de Goede

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30 07:54:25 +02:00
Linus Torvalds 7e5b2db77b Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "The whole series has been sitting in -next for quite a while with no
  complaints.  The last change to the series was before the weekend the
  removal of an SPI patch which Grant - even though previously acked by
  himself - appeared to raise objections.  So I removed it until the
  situation is clarified.  Other than that all the patches have the acks
  from their respective maintainers, all MIPS and x86 defconfigs are
  building fine and I'm not aware of any problems introduced by this
  series.

  Among the key features for this patch series is a sizable patchset for
  Lantiq which among other things introduces support for Lantiq's
  flagship product, the FALCON SOC.  It also means that the opensource
  developers behind this patchset have overtaken Lantiq's competing
  inhouse development team that was working behind closed doors.

  Less noteworthy the ath79 patchset which adds support for a few more
  chip variants, cleanups and fixes.  Finally the usual dose of tweaking
  of generic code."

Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where
printk spelling fixes clashed with file move and eventual removal of the
printk.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits)
  MIPS: lantiq: remove orphaned code
  MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.
  MIPS: lantiq: implement support for FALCON soc
  MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc
  MTD: MIPS: lantiq: implement OF support
  watchdog: MIPS: lantiq: implement OF support and minor fixes
  SERIAL: MIPS: lantiq: implement OF support
  GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
  GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
  GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
  MIPS: pci: convert lantiq driver to OF
  MIPS: lantiq: convert dma to platform driver
  MIPS: lantiq: implement support for clkdev api
  MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq()
  OF: MIPS: lantiq: implement irq_domain support
  OF: MIPS: lantiq: implement OF support
  MIPS: lantiq: drop mips_machine support
  OF: PCI: const usage needed by MIPS
  MIPS: Cavium: Remove smp_reserve_lock.
  MIPS: Move cache setup to setup_arch().
  ...
2012-05-29 18:27:19 -07:00
Roland Stigge e862e7c4ee drivers/rtc/rtc-lpc32xx.c: add device tree support
Adds device tree support for rtc-lpc32xx.c

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:34 -07:00
Viresh Kumar 0108c4ff62 rtc/spear: add Device Tree probing capability
SPEAr platforms now support DT and so must convert all drivers support DT.
This patch adds DT probing support for rtc and updates its documentation
too.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Cc: Rob Herring <robherring2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:33 -07:00
Johan Hovold 401dea7f7a leds: add LM3533 LED driver
Add sub-driver for the LEDs on National Semiconductor / TI LM3533 lighting
power chips.

The chip provides 256 brightness levels, hardware accelerated blinking as
well as ambient-light-sensor and pwm input control.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Rob Landley <rob@landley.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:32 -07:00
Shuah Khan 44e1e9f8e7 leds: add new transient trigger for one shot timer activation
The leds timer trigger does not currently have an interface to activate a
one shot timer.  The current support allows for setting two timers, one
for specifying how long a state to be on, and the second for how long the
state to be off.  The delay_on value specifies the time period an LED
should stay in on state, followed by a delay_off value that specifies how
long the LED should stay in off state.  The on and off cycle repeats until
the trigger gets deactivated.  There is no provision for one time
activation to implement features that require an on or off state to be
held just once and then stay in the original state forever.

Without one shot timer interface, user space can still use timer trigger
to set a timer to hold a state, however when user space application
crashes or goes away without deactivating the timer, the hardware will be
left in that state permanently.

As a specific example of this use-case, let's look at vibrate feature on
phones.  Vibrate function on phones is implemented using PWM pins on SoC
or PMIC.  There is a need to activate one shot timer to control the
vibrate feature, to prevent user space crashes leaving the phone in
vibrate mode permanently causing the battery to drain.

This trigger exports three properties, activate, state, and duration When
transient trigger is activated these properties are set to default values.

- duration allows setting timer value in msecs. The initial value is 0.
- activate allows activating and deactivating the timer specified by
  duration as needed. The initial and default value is 0.  This will allow
  duration to be set after trigger activation.
- state allows user to specify a transient state to be held for the specified
  duration.

Signed-off-by: Shuah Khan <shuahkhan@gmail.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: NeilBrown <neilb@suse.de>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:32 -07:00
Johan Hovold 7f26c970b4 backlight: add LM3533 backlight driver
Add sub-driver for the backlights on National Semiconductor / TI LM3533
lighting power chips.

The chip provides 256 brightness levels and ambient-light-sensor and pwm
input control.

[akpm@linux-foundation.org: fix warning]
[akpm@linux-foundation.org: fix the type of `mode']
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Rob Landley <rob@landley.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:29 -07:00
KAMEZAWA Hiroyuki cc926f7842 memcg: move charges to root cgroup if use_hierarchy=0
Presently, at removal of cgroup, ->pre_destroy() is called and moves
charges to the parent cgroup.  A major reason for returning -EBUSY from
->pre_destroy() is that the 'moving' hits the parent's resource
limitation.  It happens only when use_hierarchy=0.

Considering use_hierarchy=0, all cgroups should be flat.  So, no one
cannot justify moving charges to parent...parent and children are in flat
configuration, not hierarchical.

This patch modifes the code to move charges to the root cgroup at
rmdir/force_empty if use_hierarchy==0.  This will much simplify rmdir()
and reduce error in ->pre_destroy.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:27 -07:00
Frederic Weisbecker 2bb2ba9d51 rescounters: add res_counter_uncharge_until()
When killing a res_counter which is a child of other counter, we need to
do

	res_counter_uncharge(child, xxx)
	res_counter_charge(parent, xxx)

This is not atomic and wastes CPU.  This patch adds
res_counter_uncharge_until().  This function's uncharge propagates to
ancestors until specified res_counter.

	res_counter_uncharge_until(child, parent, xxx)

Now the operation is atomic and efficient.

Signed-off-by: Frederic Weisbecker <fweisbec@redhat.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ying Han <yinghan@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:27 -07:00
KAMEZAWA Hiroyuki 4b91355e9d memcg: fix/change behavior of shared anon at moving task
This patch changes memcg's behavior at task_move().

At task_move(), the kernel scans a task's page table and move the changes
for mapped pages from source cgroup to target cgroup.  There has been a
bug at handling shared anonymous pages for a long time.

Before patch:
  - The spec says 'shared anonymous pages are not moved.'
  - The implementation was 'shared anonymoys pages may be moved'.
    If page_mapcount <=2, shared anonymous pages's charge were moved.

After patch:
  - The spec says 'all anonymous pages are moved'.
  - The implementation is 'all anonymous pages are moved'.

Considering usage of memcg, this will not affect user's experience.
'shared anonymous' pages only exists between a tree of processes which
don't do exec().  Moving one of process without exec() seems not sane.
For example, libcgroup will not be affected by this change.  (Anyway, no
one noticed the implementation for a long time...)

Below is a discussion log:

 - current spec/implementation are complex
 - Now, shared file caches are moved
 - It adds unclear check as page_mapcount(). To do correct check,
   we should check swap users, etc.
 - No one notice this implementation behavior. So, no one get benefit
   from the design.
 - In general, once task is moved to a cgroup for running, it will not
   be moved....
 - Finally, we have control knob as memory.move_charge_at_immigrate.

Here is a patch to allow moving shared pages, completely. This makes
memcg simpler and fix current broken code.

Suggested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:24 -07:00
Mel Gorman 692569946f mm: document the meminfo and vmstat fields of relevance to transparent hugepages
Update Documentation/vm/transhuge.txt and
Documentation/filesystems/proc.txt with some information on monitoring
transparent huge page usage and the associated overhead.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:23 -07:00
Hugh Dickins 17cf28afea mm/fs: remove truncate_range
Remove vmtruncate_range(), and remove the truncate_range method from
struct inode_operations: only tmpfs ever supported it, and tmpfs has now
converted over to using the fallocate method of file_operations.

Update Documentation accordingly, adding (setlease and) fallocate lines.
And while we're in mm.h, remove duplicate declarations of shmem_lock() and
shmem_file_setup(): everyone is now using the ones in shmem_fs.h.

Based-on-patch-by: Cong Wang <amwang@redhat.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Cong Wang <amwang@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:23 -07:00
Johannes Weiner eb6332a545 Documentation: memcg: future proof hierarchical statistics documentation
The hierarchical versions of per-memcg counters in memory.stat are all
calculated the same way and are all named total_<counter>.

Documenting the pattern is easier for maintenance than listing each
counter twice.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Ying Han <yinghan@google.com>
Randy Dunlap <rdunlap@xenotime.net>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:20 -07:00
Linus Torvalds 4b78147468 MFD changes for 3.5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPw2QKAAoJEIqAPN1PVmxKfv8P/2L5d38tc3+9wYuGI1l+k7Mz
 xQt2PdAx/kHQGTjLE1DSoeOD6dn4aodFbPaTcsLsU9Eo4IiJnT68b8adr/bqYHKU
 Cod6NSPJMaBxLBJZxXsA7nY69Z6O5SMjXxEQsiDc24gaP0jjwaeY35KJSfMug8nF
 DA6rvEpchkF8QXzBmkO2t2/uPYr1YWqDZQkauLDnLRG01JnGXFz5ajv9N5pYhiFt
 QyYtheg8yEnfwnQ6AlmRtGK75jZRVmrj0kOzRjE9UL7ZwtzswWJes+RE3tlgk89m
 JQ7KASRmmqLpvcVJ9fG9SlGX//yBO6OEp5Km06RTxgmt0XftBDVqBTjk1EG2tfMR
 SR0NIz6gJ0twKAe6U0d+5HMYalOU45H5ha9e3vCqZ8vl9JfmM95RS+TmWbGcRIqj
 04Y5x3I4zq6e9D0u+211BeuRfzkQiefwWJmdPpn0oac3u5LeYbRj/aQ85fqwJWzG
 f99D9VU5xgfFHPAtL3SLFiwgd9yOiMBar6eeIva+okDyOW3KaEUzs8Y4dgDyvYcg
 IU//JGK51vLVmI5kXtGCwYkgRLF/Y7WKZ8TwypT+SY6iv6tPQVvApOZljq7RC9GI
 mXx2z2slA90jlg3TlEFZfxr1WqbZ3TCbonU1riLeMEtkiXUpLtmKC8gbhOqfGvvn
 Nzgt+YqRJXafZdELb/S+
 =Rh0r
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD changes from Samuel Ortiz:
 "Besides the usual cleanups, this one brings:

   * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton,
     ST-E's STAX211, Samsung's MAX77693 and TI's LM3533.

   * Device tree support for the twl6040, tps65910, da9502 and ab8500
     drivers.

   * Fairly big tps56910, ab8500 and db8500 updates.

   * i2c support for mc13xxx.

   * Our regular update for the wm8xxx driver from Mark."

Fix up various conflicts with other trees, largely due to ab5500 removal
etc.

* tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits)
  mfd: Fix build break of max77693 by adding REGMAP_I2C option
  mfd: Fix twl6040 build failure
  mfd: Fix max77693 build failure
  mfd: ab8500-core should depend on MFD_DB8500_PRCMU
  gpio: tps65910: dt: process gpio specific device node info
  mfd: Remove the parsing of dt info for tps65910 gpio
  mfd: Save device node parsed platform data for tps65910 sub devices
  mfd: Add r_select to lm3533 platform data
  gpio: Add Intel Centerton support to gpio-sch
  mfd: Emulate active low IRQs as well as active high IRQs for wm831x
  mfd: Mark two lm3533 zone registers as volatile
  mfd: Fix return type of lm533 attribute is_visible
  mfd: Enable Device Tree support in the ab8500-pwm driver
  mfd: Enable Device Tree support in the ab8500-sysctrl driver
  mfd: Add support for Device Tree to twl6040
  mfd: Register the twl6040 child for the ASoC codec unconditionally
  mfd: Allocate twl6040 IRQ numbers dynamically
  mfd: twl6040 code cleanup in interrupt initialization part
  mfd: Enable ab8500-gpadc driver for Device Tree
  mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver
  ...
2012-05-29 11:53:11 -07:00
Linus Torvalds d766023eea Merge branch 'doc' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull documentation updates from Jiri Kosina:
 "I am currently relaying documentation patches through 'doc' branch of
  trivial tree, until Rob, the new documentation maintainer, has
  established a proper tree."

* 'doc' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  doc: ext3: update documentation with barrier=1 default
  Documentation/initrd.txt: Change the location of util-linux
  Documentation/SubmittingPatches: suggested the use of scripts/get_maintainer.pl
  Documentation/kernel-parameters: remove autotest and mcatest
2012-05-28 10:40:11 -07:00
Linus Torvalds da85d3426f Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig changes from Michal Marek:

 - Error handling for make KCONFIG_ALLCONFIG=<...> all*config plus a fix
   for a bug that was exposed by this

 - Fix for the script/config utility.

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scripts/config: properly report and set string options
  kbuild: all{no,yes,mod,def,rand}config only read files when instructed to.
  kconfig: Add error handling to KCONFIG_ALLCONFIG
2012-05-28 10:37:56 -07:00
Linus Torvalds 1347a2cebc Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek.

Fixed up nontrivial merge conflict in Makefile as per Stephen Rothwell
and linux-next (and trivial arch/sparc/Makefile changes due to removed
sparc32 logic).

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  mips: Fix KBUILD_CPPFLAGS definition
  kbuild: fix ia64 link
  kbuild: document KBUILD_LDS, KBUILD_VMLINUX_{INIT,MAIN} and LDFLAGS_vmlinux
  kbuild: link of vmlinux moved to a script
  kbuild: refactor final link of sparc32
  kbuild: drop unused KBUILD_VMLINUX_OBJS from top-level Makefile
  kbuild: Makefile: remove unnecessary check for m68knommu ARCH
2012-05-28 10:32:28 -07:00