Commit Graph

68 Commits

Author SHA1 Message Date
Johannes Weiner 65376df582 proc: revert /proc/<pid>/maps [stack:TID] annotation
Commit b76437579d ("procfs: mark thread stack correctly in
proc/<pid>/maps") added [stack:TID] annotation to /proc/<pid>/maps.

Finding the task of a stack VMA requires walking the entire thread list,
turning this into quadratic behavior: a thousand threads means a
thousand stacks, so the rendering of /proc/<pid>/maps needs to look at a
million combinations.

The cost is not in proportion to the usefulness as described in the
patch.

Drop the [stack:TID] annotation to make /proc/<pid>/maps (and
/proc/<pid>/numa_maps) usable again for higher thread counts.

The [stack] annotation inside /proc/<pid>/task/<tid>/maps is retained, as
identifying the stack VMA there is an O(1) operation.

Siddesh said:
 "The end users needed a way to identify thread stacks programmatically and
  there wasn't a way to do that.  I'm afraid I no longer remember (or have
  access to the resources that would aid my memory since I changed
  employers) the details of their requirement.  However, I did do this on my
  own time because I thought it was an interesting project for me and nobody
  really gave any feedback then as to its utility, so as far as I am
  concerned you could roll back the main thread maps information since the
  information is available in the thread-specific files"

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: Shaohua Li <shli@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-03 08:28:43 -08:00
Mateusz Guzik a3b609ef9f proc read mm's {arg,env}_{start,end} with mmap semaphore taken.
Only functions doing more than one read are modified.  Consumeres
happened to deal with possibly changing data, but it does not seem like
a good thing to rely on.

Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Anshuman Khandual <anshuman.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 17:09:18 -08:00
Kirill A. Shutemov b20ce5e03b mm: prepare page_referenced() and page_idle to new THP refcounting
Both page_referenced() and page_idle_clear_pte_refs_one() assume that
THP can only be mapped with PMD, so there's no reason to look on PTEs
for PageTransHuge() pages.  That's no true anymore: THP can be mapped
with PTEs too.

The patch removes PageTransHuge() test from the functions and opencode
page table check.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 17:56:32 -08:00
Kirill A. Shutemov 1c290f6421 mm: sanitize page->mapping for tail pages
We don't define meaning of page->mapping for tail pages.  Currently it's
always NULL, which can be inconsistent with head page and potentially
lead to problems.

Let's poison the pointer to catch all illigal uses.

page_rmapping(), page_mapping() and page_anon_vma() are changed to look
on head page.

The only illegal use I've caught so far is __GPF_COMP pages from sound
subsystem, mapped with PTEs.  do_shared_fault() is changed to use
page_rmapping() instead of direct access to fault_page->mapping.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 17:56:32 -08:00
Al Viro e9d408e107 new helper: memdup_user_nul()
Similar to memdup_user(), except that allocated buffer is one byte
longer and '\0' is stored after the copied data.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04 10:20:19 -05:00
Alexander Kuleshov ea53cde089 mm/util: use offset_in_page macro
linux/mm.h provides offset_in_page() macro.  Let's use already predefined
macro instead of (addr & ~PAGE_MASK).

Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00
Kirill A. Shutemov e39155ea11 mm: uninline and cleanup page-mapping related helpers
Most-used page->mapping helper -- page_mapping() -- has already uninlined.
 Let's uninline also page_rmapping() and page_anon_vma().  It saves us
depending on configuration around 400 bytes in text:

   text	   data	    bss	    dec	    hex	filename
 660318	  99254	 410000	1169572	 11d8a4	mm/built-in.o-before
 659854	  99254	 410000	1169108	 11d6d4	mm/built-in.o

I also tried to make code a bit more clean.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:19 -07:00
Andrzej Hajda a4bb1e43e2 mm/util: add kstrdup_const
kstrdup() is often used to duplicate strings where neither source neither
destination will be ever modified.  In such case we can just reuse the
source instead of duplicating it.  The problem is that we must be sure
that the source is non-modifiable and its life-time is long enough.

I suspect the good candidates for such strings are strings located in
kernel .rodata section, they cannot be modifed because the section is
read-only and their life-time is equal to kernel life-time.

This small patchset proposes alternative version of kstrdup -
kstrdup_const, which returns source string if it is located in .rodata
otherwise it fallbacks to kstrdup.  To verify if the source is in
.rodata function checks if the address is between sentinels
__start_rodata, __end_rodata.  I guess it should work with all
architectures.

The main patch is accompanied by four patches constifying kstrdup for
cases where situtation described above happens frequently.

I have tested the patchset on mobile platform (exynos4210-trats) and it
saves 3272 string allocations.  Since minimal allocation is 32 or 64
bytes depending on Kconfig options the patchset saves respectively about
100KB or 200KB of memory.

Stats from tested platform show that the main offender is sysfs:

By caller:
  2260 __kernfs_new_node
    631 clk_register+0xc8/0x1b8
    318 clk_register+0x34/0x1b8
      51 kmem_cache_create
      12 alloc_vfsmnt

By string (with count >= 5):
    883 power
    876 subsystem
    135 parameters
    132 device
     61 iommu_group
    ...

This patch (of 5):

Add an alternative version of kstrdup which returns pointer to constant
char array.  The function checks if input string is in persistent and
read-only memory section, if yes it returns the input string, otherwise it
fallbacks to kstrdup.

kstrdup_const is accompanied by kfree_const performing conditional memory
deallocation of the string.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 21:21:35 -08:00
Andrea Arcangeli a7b780750e mm: gup: use get_user_pages_unlocked within get_user_pages_fast
This allows the get_user_pages_fast slow path to release the mmap_sem
before blocking.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 17:06:05 -08:00
Oleg Nesterov 58cb65487e proc/maps: make vm_is_stack() logic namespace-friendly
- Rename vm_is_stack() to task_of_stack() and change it to return
  "struct task_struct *" rather than the global (and thus wrong in
  general) pid_t.

- Add the new pid_of_stack() helper which calls task_of_stack() and
  uses the right namespace to report the correct pid_t.

  Unfortunately we need to define this helper twice, in task_mmu.c
  and in task_nommu.c. perhaps it makes sense to add fs/proc/util.c
  and move at least pid_of_stack/task_of_stack there to avoid the
  code duplication.

- Change show_map_vma() and show_numa_map() to use the new helper.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:50 -04:00
Oleg Nesterov 4449a51a7c vm_is_stack: use for_each_thread() rather then buggy while_each_thread()
Aleksei hit the soft lockup during reading /proc/PID/smaps.  David
investigated the problem and suggested the right fix.

while_each_thread() is racy and should die, this patch updates
vm_is_stack().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Aleksei Besogonov <alex.besogonov@gmail.com>
Tested-by: Aleksei Besogonov <alex.besogonov@gmail.com>
Suggested-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:17 -07:00
Andrey Ryabinin 928cec9cd6 mm: move slab related stuff from util.c to slab_common.c
Functions krealloc(), __krealloc(), kzfree() belongs to slab API, so
should be placed in slab_common.c

Also move slab allocator's tracepoints defenitions to slab_common.c No
functional changes here.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:15 -07:00
Al Viro 39f1f78d53 nick kvfree() from apparmor
too many places open-code it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 14:02:53 -04:00
Linus Torvalds 0b747172dc Merge git://git.infradead.org/users/eparis/audit
Pull audit updates from Eric Paris.

* git://git.infradead.org/users/eparis/audit: (28 commits)
  AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC
  audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range
  audit: do not cast audit_rule_data pointers pointlesly
  AUDIT: Allow login in non-init namespaces
  audit: define audit_is_compat in kernel internal header
  kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c
  sched: declare pid_alive as inline
  audit: use uapi/linux/audit.h for AUDIT_ARCH declarations
  syscall_get_arch: remove useless function arguments
  audit: remove stray newline from audit_log_execve_info() audit_panic() call
  audit: remove stray newlines from audit_log_lost messages
  audit: include subject in login records
  audit: remove superfluous new- prefix in AUDIT_LOGIN messages
  audit: allow user processes to log from another PID namespace
  audit: anchor all pid references in the initial pid namespace
  audit: convert PPIDs to the inital PID namespace.
  pid: get pid_t ppid of task in init_pid_ns
  audit: rename the misleading audit_get_context() to audit_take_context()
  audit: Add generic compat syscall support
  audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL
  ...
2014-04-12 12:38:53 -07:00
Gideon Israel Dsouza 3b32123d73 mm: use macros from compiler.h instead of __attribute__((...))
To increase compiler portability there is <linux/compiler.h> which
provides convenience macros for various gcc constructs.  Eg: __weak for
__attribute__((weak)).  I've replaced all instances of gcc attributes with
the right macro in the memory management (/mm) subsystem.

[akpm@linux-foundation.org: while-we're-there consistency tweaks]
Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:54 -07:00
William Roberts a90902531a mm: Create utility function for accessing a tasks commandline value
introduce get_cmdline() for retreiving the value of a processes
proc/self/cmdline value.

Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Richard Guy Briggs <rgb@redhat.com>

Signed-off-by: William Roberts <wroberts@tresys.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-03-07 11:52:45 -05:00
Jerome Marchand 49f0ce5f92 mm: add overcommit_kbytes sysctl variable
Some applications that run on HPC clusters are designed around the
availability of RAM and the overcommit ratio is fine tuned to get the
maximum usage of memory without swapping.  With growing memory, the
1%-of-all-RAM grain provided by overcommit_ratio has become too coarse
for these workload (on a 2TB machine it represents no less than 20GB).

This patch adds the new overcommit_kbytes sysctl variable that allow a
much finer grain.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix nommu build]
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:44 -08:00
Mikulas Patocka 03e5ac2fc3 mm: fix crash when using XFS on loopback
Commit 8456a648cf ("slab: use struct page for slab management") causes
a crash in the LVM2 testsuite on PA-RISC (the crashing test is
fsadm.sh).  The testsuite doesn't crash on 3.12, crashes on 3.13-rc1 and
later.

 Bad Address (null pointer deref?): Code=15 regs=000000413edd89a0 (Addr=000006202224647d)
 CPU: 3 PID: 24008 Comm: loop0 Not tainted 3.13.0-rc6 #5
 task: 00000001bf3c0048 ti: 000000413edd8000 task.ti: 000000413edd8000

      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
 PSW: 00001000000001101111100100001110 Not tainted
 r00-03  000000ff0806f90e 00000000405c8de0 000000004013e6c0 000000413edd83f0
 r04-07  00000000405a95e0 0000000000000200 00000001414735f0 00000001bf349e40
 r08-11  0000000010fe3d10 0000000000000001 00000040829c7778 000000413efd9000
 r12-15  0000000000000000 000000004060d800 0000000010fe3000 0000000010fe3000
 r16-19  000000413edd82a0 00000041078ddbc0 0000000000000010 0000000000000001
 r20-23  0008f3d0d83a8000 0000000000000000 00000040829c7778 0000000000000080
 r24-27  00000001bf349e40 00000001bf349e40 202d66202224640d 00000000405a95e0
 r28-31  202d662022246465 000000413edd88f0 000000413edd89a0 0000000000000001
 sr00-03  000000000532c000 0000000000000000 0000000000000000 000000000532c000
 sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000

 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000401fe42c 00000000401fe430
  IIR: 539c0030    ISR: 00000000202d6000  IOR: 000006202224647d
  CPU:        3   CR30: 000000413edd8000 CR31: 0000000000000000
  ORIG_R28: 00000000405a95e0
  IAOQ[0]: vma_interval_tree_iter_first+0x14/0x48
  IAOQ[1]: vma_interval_tree_iter_first+0x18/0x48
  RP(r2): flush_dcache_page+0x128/0x388
 Backtrace:
   flush_dcache_page+0x128/0x388
   lo_splice_actor+0x90/0x148 [loop]
   splice_from_pipe_feed+0xc0/0x1d0
   __splice_from_pipe+0xac/0xc0
   lo_direct_splice_actor+0x1c/0x70 [loop]
   splice_direct_to_actor+0xec/0x228
   lo_receive+0xe4/0x298 [loop]
   loop_thread+0x478/0x640 [loop]
   kthread+0x134/0x168
   end_fault_vector+0x20/0x28
   xfs_setsize_buftarg+0x0/0x90 [xfs]

 Kernel panic - not syncing: Bad Address (null pointer deref?)

Commit 8456a648cf changes the page structure so that the slab
subsystem reuses the page->mapping field.

The crash happens in the following way:
 * XFS allocates some memory from slab and issues a bio to read data
   into it.
 * the bio is sent to the loopback device.
 * lo_receive creates an actor and calls splice_direct_to_actor.
 * lo_splice_actor copies data to the target page.
 * lo_splice_actor calls flush_dcache_page because the page may be
   mapped by userspace.  In that case we need to flush the kernel cache.
 * flush_dcache_page asks for the list of userspace mappings, however
   that page->mapping field is reused by the slab subsystem for a
   different purpose.  This causes the crash.

Note that other architectures without coherent caches (sparc, arm, mips)
also call page_mapping from flush_dcache_page, so they may crash in the
same way.

This patch fixes this bug by testing if the page is a slab page in
page_mapping and returning NULL if it is.

The patch also fixes VM_BUG_ON(PageSlab(page)) that could happen in
earlier kernels in the same scenario on architectures without cache
coherence when CONFIG_DEBUG_VM is enabled - so it should be backported
to stable kernels.

In the old kernels, the function page_mapping is placed in
include/linux/mm.h, so you should modify the patch accordingly when
backporting it.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: John David Anglin <dave.anglin@bell.net>]
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-15 14:19:42 +07:00
Jerome Marchand 00619bcc44 mm: factor commit limit calculation
The same calculation is currently done in three differents places.
Factor that code so future changes has to be made at only one place.

[akpm@linux-foundation.org: uninline vm_commit_limit()]
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:11 +09:00
Joonsoo Kim d2cf5ad631 swap: clean-up #ifdef in page_mapping()
PageSwapCache() is always false when !CONFIG_SWAP, so compiler
properly discard related code. Therefore, we don't need #ifdef explicitly.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:57:31 -07:00
Michel Lespinasse 98d1e64f95 mm: remove free_area_cache
Since all architectures have been converted to use vm_unmapped_area(),
there is no remaining use for the free_area_cache.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-10 18:11:34 -07:00
Shaohua Li 33806f06da swap: make each swap partition have one address_space
When I use several fast SSD to do swap, swapper_space.tree_lock is
heavily contended.  This makes each swap partition have one
address_space to reduce the lock contention.  There is an array of
address_space for swap.  The swap entry type is the index to the array.

In my test with 3 SSD, this increases the swapout throughput 20%.

[akpm@linux-foundation.org: revert unneeded change to  __add_to_swap_cache]
Signed-off-by: Shaohua Li <shli@fusionio.com>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:17 -08:00
Shaohua Li 9800339b5e mm: don't inline page_mapping()
According to akpm, this saves 1/2k text and makes things simple for the
next patch.

Numbers from Minchan:

add/remove: 1/0 grow/shrink: 6/22 up/down: 92/-516 (-424)
function                                     old     new   delta
page_mapping                                   -      48     +48
do_task_stat                                2292    2308     +16
page_remove_rmap                             240     248      +8
load_elf_binary                             4500    4508      +8
update_queue                                 532     536      +4
scsi_probe_and_add_lun                      2892    2896      +4
lookup_fast                                  644     648      +4
vcs_read                                    1040    1036      -4
__ip_route_output_key                       1904    1900      -4
ip_route_input_noref                        2508    2500      -8
shmem_file_aio_read                          784     772     -12
__isolate_lru_page                           272     256     -16
shmem_replace_page                           708     688     -20
mark_buffer_dirty                            228     208     -20
__set_page_dirty_buffers                     240     220     -20
__remove_mapping                             276     256     -20
update_mmu_cache                             500     476     -24
set_page_dirty_balance                        92      68     -24
set_page_dirty                               172     148     -24
page_evictable                                88      64     -24
page_cache_pipe_buf_steal                    248     224     -24
clear_page_dirty_for_io                      340     316     -24
test_set_page_writeback                      400     372     -28
test_clear_page_writeback                    516     488     -28
invalidate_inode_page                        156     128     -28
page_mkclean                                 432     400     -32
flush_dcache_page                            360     328     -32
__set_page_dirty_nobuffers                   324     280     -44
shrink_page_list                            2412    2356     -56

Signed-off-by: Shaohua Li <shli@fusionio.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:17 -08:00
Michel Lespinasse 41badc15cb mm: make do_mmap_pgoff return populate as a size in bytes, not as a bool
do_mmap_pgoff() rounds up the desired size to the next PAGE_SIZE
multiple, however there was no equivalent code in mm_populate(), which
caused issues.

This could be fixed by introduced the same rounding in mm_populate(),
however I think it's preferable to make do_mmap_pgoff() return populate
as a size rather than as a boolean, so we don't have to duplicate the
size rounding logic in mm_populate().

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Tested-by: Andy Lutomirski <luto@amacapital.net>
Cc: Greg Ungerer <gregungerer@westnet.com.au>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:11 -08:00
Michel Lespinasse bebeb3d68b mm: introduce mm_populate() for populating new vmas
When creating new mappings using the MAP_POPULATE / MAP_LOCKED flags (or
with MCL_FUTURE in effect), we want to populate the pages within the
newly created vmas.  This may take a while as we may have to read pages
from disk, so ideally we want to do this outside of the write-locked
mmap_sem region.

This change introduces mm_populate(), which is used to defer populating
such mappings until after the mmap_sem write lock has been released.
This is implemented as a generalization of the former do_mlock_pages(),
which accomplished the same task but was using during mlock() /
mlockall().

Signed-off-by: Michel Lespinasse <walken@google.com>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Rik van Riel <riel@redhat.com>
Tested-by: Andy Lutomirski <luto@amacapital.net>
Cc: Greg Ungerer <gregungerer@westnet.com.au>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:10 -08:00
Jiri Kosina 3bd7bf1f0f Merge branch 'master' into for-next
Sync up with Linus' tree to be able to apply Cesar's patch
against newer version of the code.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-28 19:29:19 +01:00
Borislav Petkov 0db10c8e8f krealloc: Fix kernel-doc comment
It should say "@new_size" and not "@size". Correct that.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: trivial@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-15 22:43:02 +02:00
Ezequiel Garcia e21827aadd mm: Use __do_krealloc to do the krealloc job
Without this patch we can get (many) kmem trace events
with call site at krealloc().

This happens because krealloc is calling __krealloc,
which performs the allocation through kmalloc_track_caller.

Since neither krealloc nor __krealloc are marked inline explicitly,
the caller can be traced as being krealloc, which clearly is not
the intended behavior.

This patch allows to get the real caller of krealloc, by creating
an always inlined function __do_krealloc, thus tracing the
call site accurately.

Acked-by: Christoph Lameter <cl@linux.com>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-09-04 10:22:58 +03:00
Al Viro eb36c5873b new helper: vm_mmap_pgoff()
take it to mm/util.c, convert vm_mmap() to use of that one and
take it to mm/util.c as well, convert both sys_mmap_pgoff() to
use of vm_mmap_pgoff()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 10:37:18 -04:00
Siddhesh Poyarekar b76437579d procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone.  This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks.  This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.

For a multithreaded program like the following:

	#include <pthread.h>

	void *thread_main(void *foo)
	{
		while(1);
	}

	int main()
	{
		pthread_t t;
		pthread_create(&t, NULL, thread_main, NULL);
		pthread_join(t, NULL);
	}

proc/PID/maps looks like the following:

    00400000-00401000 r-xp 00000000 fd:0a 3671804                            /home/siddhesh/a.out
    00600000-00601000 rw-p 00000000 fd:0a 3671804                            /home/siddhesh/a.out
    019ef000-01a10000 rw-p 00000000 00:00 0                                  [heap]
    7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
    7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
    7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
    7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
    7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
    7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
    7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
    7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0                          [stack]
    7fff627ff000-7fff62800000 r-xp 00000000 00:00 0                          [vdso]
    ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0                  [vsyscall]

Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack.  Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.

With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack].  All other 'stack' vmas are marked as
anonymous memory.  /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].

So /proc/PID/maps will look like this:

    00400000-00401000 r-xp 00000000 fd:0a 3671804                            /home/siddhesh/a.out
    00600000-00601000 rw-p 00000000 fd:0a 3671804                            /home/siddhesh/a.out
    019ef000-01a10000 rw-p 00000000 00:00 0                                  [heap]
    7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
    7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0                          [stack:1442]
    7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
    7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
    7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
    7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
    7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
    7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0                          [stack]
    7fff627ff000-7fff62800000 r-xp 00000000 00:00 0                          [vdso]
    ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0                  [vsyscall]

Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack.  The task level maps will
however like this:

    00400000-00401000 r-xp 00000000 fd:0a 3671804                            /home/siddhesh/a.out
    00600000-00601000 rw-p 00000000 fd:0a 3671804                            /home/siddhesh/a.out
    019ef000-01a10000 rw-p 00000000 00:00 0                                  [heap]
    7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
    7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0                          [stack]
    7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
    7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
    7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
    7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
    7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
    7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
    7fff627ff000-7fff62800000 r-xp 00000000 00:00 0                          [vdso]
    ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0                  [vsyscall]

where only the vma that is being used as a stack by *that* task is
marked as [stack].

Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:

    [siddhesh@localhost ~ ]$ pgrep a.out
    1441
    [siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
    7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0                          [stack:1442]
    7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0                          [stack]
    [siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
    7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0                          [stack]
    [siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
    7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0                          [stack]
    [siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
    7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
    7fff6273a000 default stack anon=3 dirty=3 N0=3
    [siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
    7f8a44492000 default stack anon=2 dirty=2 N0=2
    [siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
    7fff6273a000 default stack anon=3 dirty=3 N0=3

[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:58 -07:00
Paul Gortmaker b95f1b31b7 mm: Map most files to use export.h instead of module.h
The files changed within are only using the EXPORT_SYMBOL
macro variants.  They are not using core modular infrastructure
and hence don't need module.h but only the export.h header.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:12 -04:00
Namhyung Kim 6038def0d1 mm: nommu: sort mm->mmap list properly
When I was reading nommu code, I found that it handles the vma list/tree
in an unusual way.  IIUC, because there can be more than one
identical/overrapped vmas in the list/tree, it sorts the tree more
strictly and does a linear search on the tree.  But it doesn't applied to
the list (i.e.  the list could be constructed in a different order than
the tree so that we can't use the list when finding the first vma in that
order).

Since inserting/sorting a vma in the tree and link is done at the same
time, we can easily construct both of them in the same order.  And linear
searching on the tree could be more costly than doing it on the list, it
can be converted to use the list.

Also, after the commit 297c5eee37 ("mm: make the vma list be doubly
linked") made the list be doubly linked, there were a couple of code need
to be fixed to construct the list properly.

Patch 1/6 is a preparation.  It maintains the list sorted same as the tree
and construct doubly-linked list properly.  Patch 2/6 is a simple
optimization for the vma deletion.  Patch 3/6 and 4/6 convert tree
traversal to list traversal and the rest are simple fixes and cleanups.

This patch:

@vma added into @mm should be sorted by start addr, end addr and VMA
struct addr in that order because we may get identical VMAs in the @mm.
However this was true only for the rbtree, not for the list.

This patch fixes this by remembering 'rb_prev' during the tree traversal
like find_vma_prepare() does and linking the @vma via __vma_link_list().
After this patch, we can iterate the whole VMAs in correct order simply by
using @mm->mmap list.

[akpm@linux-foundation.org: avoid duplicating __vma_link_list()]
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:05 -07:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Nick Piggin ccd35fb9f4 kernel: kmem_ptr_validate considered harmful
This is a nasty and error prone API. It is no longer used, remove it.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:16 +11:00
Xiao Guangrong 45888a0c6e export __get_user_pages_fast() function
This function is used by KVM to pin process's page in the atomic context.

Define the 'weak' function to avoid other architecture not support it

Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:24 +02:00
Julia Lawall 90d7404558 mm: use memdup_user
Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:44:54 -07:00
Pekka Enberg fc1c183353 slab: Generify kernel pointer validation
As suggested by Linus, introduce a kern_ptr_validate() helper that does some
sanity checks to make sure a pointer is a valid kernel pointer.  This is a
preparational step for fixing SLUB kmem_ptr_validate().

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-09 10:09:50 -07:00
David Howells efc1a3b169 nommu: don't need get_unmapped_area() for NOMMU
get_unmapped_area() is unnecessary for NOMMU as no-one calls it.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16 12:15:40 -08:00
Hugh Dickins 66f0dc481e mm: move sys_mmap_pgoff from util.c
Move sys_mmap_pgoff() from mm/util.c to mm/mmap.c and mm/nommu.c,
where we'd expect to find such code: especially now that it contains
the MAP_HUGETLB handling.  Revert mm/util.c to how it was in 2.6.32.

This patch just ignores MAP_HUGETLB in the nommu case, as in 2.6.32,
whereas 2.6.33-rc2 reported -ENOSYS.  Perhaps validate_mmap_request()
should reject it with -EINVAL?  Add that later if necessary.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-30 12:23:27 -08:00
Al Viro 8c7b49b3ec fix a struct file leak in do_mmap_pgoff()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-11 06:44:57 -05:00
Al Viro f8b7256096 Unify sys_mmap*
New helper - sys_mmap_pgoff(); switch syscalls to using it.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-11 06:44:29 -05:00
Pekka Enberg e03ab9d415 Merge branches 'slab/documentation', 'slab/fixes', 'slob/cleanups' and 'slub/fixes' into for-linus 2009-06-17 08:30:15 +03:00
Nick Piggin d2bf6be8ab mm: clean up get_user_pages_fast() documentation
Move more documentation for get_user_pages_fast into the new kerneldoc comment.
Add some comments for get_user_pages as well.

Also, move get_user_pages_fast declaration up to get_user_pages. It wasn't
there initially because it was once a static inline function.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Andy Grover <andy.grover@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:30 -07:00
Pekka Enberg a234bdc9ae slab: document kzfree() zeroing behavior
As suggested by Alan Cox, document the fact that kzfree() can zero out a great
deal more memory than the what the user requested from kmalloc().

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-01 09:22:46 +03:00
Ingo Molnar 44347d947f Merge branch 'linus' into tracing/core
Merge reason: tracing/core was on a .30-rc1 base and was missing out on
              on a handful of tracing fixes present in .30-rc5-almost.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-07 11:17:34 +02:00
Steven Rostedt ad8d75fff8 tracing/events: move trace point headers into include/trace/events
Impact: clean up

Create a sub directory in include/trace called events to keep the
trace point headers in their own separate directory. Only headers that
declare trace points should be defined in this directory.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-14 22:05:43 -04:00
Steven Rostedt a8d154b009 tracing: create automated trace defines
This patch lowers the number of places a developer must modify to add
new tracepoints. The current method to add a new tracepoint
into an existing system is to write the trace point macro in the
trace header with one of the macros TRACE_EVENT, TRACE_FORMAT or
DECLARE_TRACE, then they must add the same named item into the C file
with the macro DEFINE_TRACE(name) and then add the trace point.

This change cuts out the needing to add the DEFINE_TRACE(name).
Every file that uses the tracepoint must still include the trace/<type>.h
file, but the one C file must also add a define before the including
of that file.

 #define CREATE_TRACE_POINTS
 #include <trace/mytrace.h>

This will cause the trace/mytrace.h file to also produce the C code
necessary to implement the trace point.

Note, if more than one trace/<type>.h is used to create the C code
it is best to list them all together.

 #define CREATE_TRACE_POINTS
 #include <trace/foo.h>
 #include <trace/bar.h>
 #include <trace/fido.h>

Thanks to Mathieu Desnoyers and Christoph Hellwig for coming up with
the cleaner solution of the define above the includes over my first
design to have the C code include a "special" header.

This patch converts sched, irq and lockdep and skb to use this new
method.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-14 12:57:28 -04:00
Andy Grover 9de100d001 mm: document get_user_pages_fast()
While better than get_user_pages(), the usage of gupf(), especially the
return values and the fact that it can potentially only partially pin the
range, warranted some documentation.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:32 -07:00
Eduard - Gabriel Munteanu ca2b84cb3c kmemtrace: use tracepoints
kmemtrace now uses tracepoints instead of markers. We no longer need to
use format specifiers to pass arguments.

Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
[ folded: Use the new TP_PROTO and TP_ARGS to fix the build.     ]
[ folded: fix build when CONFIG_KMEMTRACE is disabled.           ]
[ folded: define tracepoints when CONFIG_TRACEPOINTS is enabled. ]
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <ae61c0f37156db8ec8dc0d5778018edde60a92e3.1237813499.git.eduard.munteanu@linux360.ro>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-03 12:23:06 +02:00
Li Zefan 610a77e04a memdup_user(): introduce
I notice there are many places doing copy_from_user() which follows
kmalloc():

        dst = kmalloc(len, GFP_KERNEL);
        if (!dst)
                return -ENOMEM;
        if (copy_from_user(dst, src, len)) {
		kfree(dst);
		return -EFAULT
	}

memdup_user() is a wrapper of the above code.  With this new function, we
don't have to write 'len' twice, which can lead to typos/mistakes.  It
also produces smaller code and kernel text.

A quick grep shows 250+ places where memdup_user() *may* be used.  I'll
prepare a patchset to do this conversion.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:13 -07:00