Commit Graph

468 Commits

Author SHA1 Message Date
Suresh Siddha f833bab87f clockevent: Prevent dead lock on clockevents_lock
Currently clockevents_notify() is called with interrupts enabled at
some places and interrupts disabled at some other places.

This results in a deadlock in this scenario.

cpu A holds clockevents_lock in clockevents_notify() with irqs enabled
cpu B waits for clockevents_lock in clockevents_notify() with irqs disabled
cpu C doing set_mtrr() which will try to rendezvous of all the cpus.

This will result in C and A come to the rendezvous point and waiting
for B. B is stuck forever waiting for the spinlock and thus not
reaching the rendezvous point.

Fix the clockevents code so that clockevents_lock is taken with
interrupts disabled and thus avoid the above deadlock.

Also call lapic_timer_propagate_broadcast() on the destination cpu so
that we avoid calling smp_call_function() in the clockevents notifier
chain.

This issue left us wondering if we need to change the MTRR rendezvous
logic to use stop machine logic (instead of smp_call_function) or add
a check in spinlock debug code to see if there are other spinlocks
which gets taken under both interrupts enabled/disabled conditions.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: "Pallipadi Venkatesh" <venkatesh.pallipadi@intel.com>
Cc: "Brown Len" <len.brown@intel.com>
LKML-Reference: <1250544899.2709.210.camel@sbs-t61.sc.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-19 18:15:10 +02:00
Martin Schwidefsky 01548f4d3e clocksource: Avoid clocksource watchdog circular locking dependency
stop_machine from a multithreaded workqueue is not allowed because
of a circular locking dependency between cpu_down and the workqueue
execution. Use a kernel thread to do the clocksource downgrade.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: john stultz <johnstul@us.ibm.com>
LKML-Reference: <20090818170942.3ab80c91@skybase>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-19 12:00:56 +02:00
Thomas Gleixner d0981a1b21 clocksource: Protect the watchdog rating changes with clocksource_mutex
Martin pointed out that commit 6ea41d2529 (clocksource: Call
clocksource_change_rating() outside of watchdog_lock) has a
theoretical reference count problem. The calls to
clocksource_change_rating() are now done outside of the clocksource
mutex and outside of the watchdog lock. A concurrent
clocksource_unregister() could remove the clock.

Split out the code which changes the rating from
clocksource_change_rating() into __clocksource_change_rating().

Protect the clocksource_watchdog_work() code sequence with the
clocksource_mutex() and call __clocksource_change_rating().

LKML-Reference: <alpine.LFD.2.00.0908171038420.2782@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-08-19 11:42:48 +02:00
Amerigo Wang de809347ae timers: Drop write permission on /proc/timer_list
/proc/timer_list and /proc/slabinfo are not supposed to be
written, so there should be no write permissions on it.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: linux-mm@kvack.org
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
LKML-Reference: <20090817094525.6355.88682.sendpatchset@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 11:47:31 +02:00
Thomas Gleixner 6ea41d252f clocksource: Call clocksource_change_rating() outside of watchdog_lock
The changes to the watchdog logic introduced a lock inversion between
watchdog_lock and clocksource_mutex. Change the rating outside of
watchdog_lock to avoid it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 13:20:42 +02:00
Martin Schwidefsky 23970e389e timekeeping: Introduce read_boot_clock
Add the new function read_boot_clock to get the exact time the system
has been started. For architectures without support for exact boot
time a new weak function is added that returns 0.  Use the exact boot
time to initialize wall_to_monotonic, or xtime if the read_boot_clock
returned 0.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134811.296703241@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:47 +02:00
Martin Schwidefsky d4f587c67f timekeeping: Increase granularity of read_persistent_clock()
The persistent clock of some architectures (e.g. s390) have a
better granularity than seconds. To reduce the delta between the
host clock and the guest clock in a virtualized system change the 
read_persistent_clock function to return a struct timespec.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134811.013873340@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:46 +02:00
Martin Schwidefsky 75c5158f70 timekeeping: Update clocksource with stop_machine
update_wall_time calls change_clocksource HZ times per second to check
if a new clock source is available. In close to 100% of all calls
there is no new clock. Replace the tick based check by an update done
with stop_machine.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134810.711836357@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:46 +02:00
Martin Schwidefsky 2ba2a3054f timekeeping: Add timekeeper read_clock helper functions
Add timekeeper_read_clock_ntp and timekeeper_read_clock_raw and use
them for getnstimeofday, ktime_get, ktime_get_ts and getrawmonotonic.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134810.435105711@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:46 +02:00
Martin Schwidefsky 0a54419836 timekeeping: Move NTP adjusted clock multiplier to struct timekeeper
The clocksource structure has two multipliers, the unmodified multiplier
clock->mult_orig and the NTP corrected multiplier clock->mult. The NTP
multiplier is misplaced in the struct clocksource, this is private
information of the timekeeping code. Add the mult field to the struct
timekeeper to contain the NTP corrected value, keep the unmodifed
multiplier in clock->mult and remove clock->mult_orig.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134810.149047645@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:46 +02:00
Martin Schwidefsky 23ce72117c timekeeping: Add xtime_shift and ntp_error_shift to struct timekeeper
The xtime_nsec value in the timekeeper structure is shifted by a few
bits to improve precision. This happens to be the same value as the
clock->shift. To improve readability add xtime_shift to the timekeeper
and use it instead of the clock->shift. Likewise add ntp_error_shift
and replace all (NTP_SCALE_SHIFT - clock->shift) expressions.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134809.871899606@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:46 +02:00
Martin Schwidefsky 155ec60226 timekeeping: Introduce struct timekeeper
Add struct timekeeper to keep the internal values timekeeping.c needs
in regard to the currently selected clock source. This moves the
timekeeping intervals, xtime_nsec and the ntp error value from struct
clocksource to struct timekeeper. The raw_time is removed from the
clocksource as well. It gets treated like xtime as a global variable.
Eventually xtime raw_time should be moved to struct timekeeper.

[ tglx: minor cleanup ]

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134809.613209842@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:46 +02:00
Martin Schwidefsky c55c87c892 clocksource: Move watchdog downgrade to a work queue thread
Move the downgrade of an unstable clocksource from the timer interrupt
context into the process context of a work queue thread. This is
needed to be able to do the clocksource switch with stop_machine.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134809.354926067@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:46 +02:00
Martin Schwidefsky fb63a0ebe6 clocksource: Refactor clocksource watchdog
Refactor clocksource watchdog code to make it more readable. Add
clocksource_dequeue_watchdog to remove a clocksource from the watchdog
list when it is unregistered.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134809.110881699@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:46 +02:00
Martin Schwidefsky 0f8e8ef7c2 clocksource: Simplify clocksource watchdog resume logic
To resume the clocksource watchdog just remove the CLOCK_SOURCE_WATCHDOG
bit from the watched clocksource.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134808.880925790@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:46 +02:00
Martin Schwidefsky 8cf4e750f8 clocksource: Delay clocksource watchdog highres enablement
The clocksource watchdog marks a clock as highres capable before it
checked the deviation from the watchdog clocksource even for a single
time. Make sure that the deviation is at least checked once before
doing the switch to highres mode.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134808.627795883@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:46 +02:00
Martin Schwidefsky f1b82746c1 clocksource: Cleanup clocksource selection
If a non high-resolution clocksource is first set as override clock
and then registered it becomes active even if the system is in one-shot
mode. Move the override check from sysfs_override_clocksource to the
clocksource selection. That fixes the bug and simplifies the code. The
check in clocksource_register for double registration of the same
clocksource is removed without replacement.

To find the initial clocksource a new weak function in jiffies.c is
defined that returns the jiffies clocksource. The architecture code
can then override the weak function with a more suitable clocksource,
e.g. the TOD clock on s390.

[ tglx: Folded in a fix from John Stultz ]

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134808.388024160@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:46 +02:00
Martin Schwidefsky 1be3967948 timekeeping: Move reset of cycle_last for tsc clocksource to tsc
change_clocksource resets the cycle_last value to zero then sets it to
a value read from the clocksource. The reset to zero is required only
for the TSC clocksource to make the read_tsc function work after a
resume. The reason is that the TSC read function uses cycle_last to
detect backwards going TSCs. In the resume case cycle_last contains
the TSC value from the last update before the suspend. On resume the
TSC starts counting from 0 again and would trip over the cycle_last
comparison.

This is subtle and surprising. Move the reset to a resume function in
the tsc code.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134808.142191175@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:45 +02:00
Martin Schwidefsky a0f7d48bfb timekeeping: Remove clocksource inline functions
The three inline functions clocksource_read, clocksource_enable and
clocksource_disable are simple wrappers of an indirect call plus the
copy from and to the mult_orig value. The functions are exclusively
used by the timekeeping code which has intimate knowledge of the
clocksource anyway. Therefore remove the inline functions. No
functional change.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134807.903108946@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:45 +02:00
John Stultz 31089c13bc timekeeping: Introduce timekeeping_leap_insert
Move the adjustment of xtime, wall_to_monotonic and the update of the
vsyscall variables to the timekeeping code.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
LKML-Reference: <20090814134807.609730216@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:45 +02:00
Thomas Gleixner 4cd1993f00 Merge branch 'linus' into timers/core
Reason: Martin's timekeeping cleanup series depends on both
timers/core and mainline changes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-14 15:59:30 +02:00
Thomas Gleixner 79ef2bb014 clocksource: Prevent NULL pointer dereference
Writing a zero length string to sys/.../current_clocksource will cause
a NULL pointer dereference if the clock events system is in one shot
(highres or nohz) mode.

Pointed-out-by: Dan Carpenter <error27@gmail.com>
LKML-Reference: <alpine.DEB.2.00.0907191545580.12306@bicker>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-07-19 17:15:54 +02:00
Thomas Gleixner 6ff7041dbf hrtimer: Fix migration expiry check
The timer migration expiry check should prevent the migration of a
timer to another CPU when the timer expires before the next event is
scheduled on the other CPU. Migrating the timer might delay it because
we can not reprogram the clock event device on the other CPU. But the
code implementing that check has two flaws:

- for !HIGHRES the check compares the expiry value with the clock
  events device expiry value which is wrong for CLOCK_REALTIME based
  timers.

- the check is racy. It holds the hrtimer base lock of the target CPU,
  but the clock event device expiry value can be modified
  nevertheless, e.g. by an timer interrupt firing.

The !HIGHRES case is easy to fix as we can enqueue the timer on the
cpu which was selected by the load balancer. It runs the idle
balancing code once per jiffy anyway. So the maximum delay for the
timer is the same as when we keep the tick on the current cpu going.

In the HIGHRES case we can get the next expiry value from the hrtimer
cpu_base of the target CPU and serialize the update with the cpu_base
lock. This moves the lock section in hrtimer_interrupt() so we can set
next_event to KTIME_MAX while we are handling the expired timers and
set it to the next expiry value after we handled the timers under the
base lock. While the expired timers are processed timer migration is
blocked because the expiry time of the timer is always <= KTIME_MAX.

Also remove the now useless clockevents_get_next_event() function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-07-10 17:32:55 +02:00
Thomas Gleixner a40f262cc2 timekeeping: Move ktime_get() functions to timekeeping.c
The ktime_get() functions for GENERIC_TIME=n are still located in
hrtimer.c. Move them to time/timekeeping.c where they belong.

LKML-Reference: <new-submission>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-07-07 13:00:31 +02:00
Martin Schwidefsky 951ed4d36b timekeeping: optimized ktime_get[_ts] for GENERIC_TIME=y
The generic ktime_get function defined in kernel/hrtimer.c is suboptimial
for GENERIC_TIME=y:

 0)               |  ktime_get() {
 0)               |    ktime_get_ts() {
 0)               |      getnstimeofday() {
 0)               |        read_tod_clock() {
 0)   0.601 us    |        }
 0)   1.938 us    |      }
 0)               |      set_normalized_timespec() {
 0)   0.602 us    |      }
 0)   4.375 us    |    }
 0)   5.523 us    |  }

Overall there are two read_seqbegin/read_seqretry loops and a lot of
unnecessary struct timespec calculations. ktime_get returns a nano second
value which is the sum of xtime, wall_to_monotonic and the nano second
delta from the clock source.

ktime_get can be optimized for GENERIC_TIME=y. The new version only calls
clocksource_read:

 0)               |  ktime_get() {
 0)               |    read_tod_clock() {
 0)   0.610 us    |    }
 0)   1.977 us    |  }

It uses a single read_seqbegin/readseqretry loop and just adds everthing
to a nano second value.

ktime_get_ts is optimized in a similar fashion.

[ tglx: added WARN_ON(timekeeping_suspended) as in getnstimeofday() ]

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: john stultz <johnstul@us.ibm.com>
LKML-Reference: <20090707112728.3005244d@skybase>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-07-07 12:47:33 +02:00
Heiko Carstens 507e123151 timer stats: Optimize by adding quick check to avoid function calls
When the kernel is configured with CONFIG_TIMER_STATS but timer
stats are runtime disabled we still get calls to
__timer_stats_timer_set_start_info which initializes some
fields in the corresponding struct timer_list.

So add some quick checks in the the timer stats setup functions
to avoid function calls to __timer_stats_timer_set_start_info
when timer stats are disabled.

In an artificial workload that does nothing but playing ping
pong with a single tcp packet via loopback this decreases cpu
consumption by 1 - 1.5%.

This is part of a modified function trace output on SLES11:

 perl-2497  [00] 28630647177732388 [+  125]: sk_reset_timer <-tcp_v4_rcv
 perl-2497  [00] 28630647177732513 [+  125]: mod_timer <-sk_reset_timer
 perl-2497  [00] 28630647177732638 [+  125]: __timer_stats_timer_set_start_info <-mod_timer
 perl-2497  [00] 28630647177732763 [+  125]: __mod_timer <-mod_timer
 perl-2497  [00] 28630647177732888 [+  125]: __timer_stats_timer_set_start_info <-__mod_timer
 perl-2497  [00] 28630647177733013 [+   93]: lock_timer_base <-__mod_timer

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mustafa Mesanovic <mustafa.mesanovic@de.ibm.com>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20090623153811.GA4641@osiris.boeblingen.de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-24 11:15:09 +02:00
Linus Torvalds 38df92b8ce Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  NOHZ: Properly feed cpufreq ondemand governor
2009-06-20 10:51:44 -07:00
Linus Torvalds 19035e5b5d Merge branch 'timers-for-linus-migration' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-migration' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timers: Logic to move non pinned timers
  timers: /proc/sys sysctl hook to enable timer migration
  timers: Identifying the existing pinned timers
  timers: Framework for identifying pinned timers
  timers: allow deferrable timers for intervals tv2-tv5 to be deferred

Fix up conflicts in kernel/sched.c and kernel/timer.c manually
2009-06-15 10:06:19 -07:00
Linus Torvalds f9db6e0951 Merge branch 'timers-for-linus-clockevents' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-clockevents' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clockevent: export register_device and delta2ns
  clockevents: tick_broadcast_device can become static
2009-06-15 09:58:50 -07:00
Linus Torvalds 3f27c0d2a4 Merge branch 'timers-for-linus-clocksource' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-clocksource' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clocksource: prevent selection of low resolution clocksourse also for nohz=on
  clocksource: sanity check sysfs clocksource changes
2009-06-15 09:58:33 -07:00
Thomas Gleixner cd6d95d844 clocksource: prevent selection of low resolution clocksourse also for nohz=on
commit 3f68535ada (clocksource: sanity check sysfs clocksource
changes) prevents selection of non high resolution capable
clocksources when high resolution mode is active, but did not take
into account that the same rules apply for highres=off nohz=on.

Check the tick device mode instead of hrtimer_hres_active() to verify
whether the system needs to be protected from a switch to jiffies or
other non highres capable clock sources.

Reported-by: Luming Yu <luming.yu@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-06-13 12:00:26 +02:00
john stultz 3f68535ada clocksource: sanity check sysfs clocksource changes
Thomas, Andrew and Ingo pointed out that we don't have any safety checks
in the clocksource sysfs entries to make sure sysadmins don't try to
change the clocksource to a non high-res timer capable clocksource (such
as jiffies) when high-res timers (HRT) is enabled.  Doing so will likely
hang a system.

Correct this by filtering non HRT clocksources from available_clocksources
and not accepting non HRT clocksources with HRT enabled.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-06-11 11:24:52 +02:00
Paul Mundt cf9fe114e3 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2009-06-11 09:01:14 +03:00
Eero Nurkkala f2e21c9610 NOHZ: Properly feed cpufreq ondemand governor
A call from irq_exit() may occasionally pause the timing
info for cpufreq ondemand governor. This results in the
cpufreq ondemand governor to fail to calculate the 
system load properly. Thus, relocate the checks for this
particular case to keep the governor always functional.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Reported-by: Tero Kristo <tero.kristo@nokia.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-27 15:33:43 +02:00
Paul Mundt 5f8371cec9 Merge branches 'sh/stable-updates' and 'sh/sparseirq' 2009-05-22 13:29:37 +09:00
Thomas Gleixner dce48a84ad sched, timers: move calc_load() to scheduler
Dimitri Sivanich noticed that xtime_lock is held write locked across
calc_load() which iterates over all online CPUs. That can cause long
latencies for xtime_lock readers on large SMP systems. 

The load average calculation is an rough estimate anyway so there is
no real need to protect the readers vs. the update. It's not a problem
when the avenrun array is updated while a reader copies the values.

Instead of iterating over all online CPUs let the scheduler_tick code
update the number of active tasks shortly before the avenrun update
happens. The avenrun update itself is handled by the CPU which calls
do_timer().

[ Impact: reduce xtime_lock write locked section ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
2009-05-15 15:32:45 +02:00
Arun R Bharadwaj eea08f32ad timers: Logic to move non pinned timers
* Arun R Bharadwaj <arun@linux.vnet.ibm.com> [2009-04-16 12:11:36]:

This patch migrates all non pinned timers and hrtimers to the current
idle load balancer, from all the idle CPUs. Timers firing on busy CPUs
are not migrated.

While migrating hrtimers, care should be taken to check if migrating
a hrtimer would result in a latency or not. So we compare the expiry of the
hrtimer with the next timer interrupt on the target cpu and migrate the
hrtimer only if it expires *after* the next interrupt on the target cpu.
So, added a clockevents_get_next_event() helper function to return the
next_event on the target cpu's clock_event_device.

[ tglx: cleanups and simplifications ]

Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-13 16:52:42 +02:00
Arun R Bharadwaj 5c333864a6 timers: Identifying the existing pinned timers
* Arun R Bharadwaj <arun@linux.vnet.ibm.com> [2009-04-16 12:11:36]:

The following pinned hrtimers have been identified and marked:
1)sched_rt_period_timer
2)tick_sched_timer
3)stack_trace_timer_fn

[ tglx: fixup the hrtimer pinned mode ]

Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-13 16:52:42 +02:00
Magnus Damm c81fc2c331 clockevent: export register_device and delta2ns
Export the following symbols using EXPORT_SYMBOL_GPL:
 - clockevent_delta2ns
 - clockevents_register_device

This allows us to build SuperH clockevent and clocksource
drivers as modules, see drivers/clocksource/sh_*.c

[ Impact: allow modular build of clockevent drivers ]

Signed-off-by: Magnus Damm <damm@igel.co.jp>
LKML-Reference: <20090501055247.8286.64067.sendpatchset@rx1.opensource.se>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-02 11:51:07 +02:00
john stultz 7d27558c41 timekeeping: create arch_gettimeoffset infrastructure
Some arches don't supply their own clocksource. This is mainly the
case in architectures that get their inter-tick times by reading the
counter on their interval timer.  Since these timers wrap every tick,
they're not really useful as clocksources.  Wrapping them to act like
one is possible but not very efficient. So we provide a callout these
arches can implement for use with the jiffies clocksource to provide
finer then tick granular time.

[ Impact: ease the migration to generic time keeping ]

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-02 11:45:15 +02:00
Magnus Damm a25cbd045a clocksource: setup mult_orig in clocksource_enable()
Setup clocksource mult_orig in clocksource_enable().

Clocksource drivers can save power by using keeping the
device clock disabled while the clocksource is unused.

In practice this means that the enable() and disable()
callbacks perform clk_enable() and clk_disable().

The enable() callback may also use clk_get_rate() to get
the clock rate from the clock framework. This information
can then be used to calculate the shift and mult variables.

Currently the mult_orig variable is setup from mult at
registration time only. This is conflicting with the above
case since the clock is disabled and the mult variable is
not yet calculated at the time of registration.

Moving the mult_orig setup code to clocksource_enable()
allows us to both handle the common case with no enable()
callback and the mult-changed-after-enable() case.

[ Impact: allow dynamic clock source usage ]

Signed-off-by: Magnus Damm <damm@igel.co.jp>
LKML-Reference: <20090501054546.8193.10688.sendpatchset@rx1.opensource.se>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-02 11:45:15 +02:00
Dmitri Vorobiev a52f5c5620 clockevents: tick_broadcast_device can become static
The variable tick_broadcast_device is not used outside of the
file where it is defined, so let's make it static.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-02 10:31:14 +02:00
john stultz 74a03b69d1 clockevents: prevent endless loop in tick_handle_periodic()
tick_handle_periodic() can lock up hard when a one shot clock event
device is used in combination with jiffies clocksource.

Avoid an endless loop issue by requiring that a highres valid
clocksource be installed before we call tick_periodic() in a loop when
using ONESHOT mode. The result is we will only increment jiffies once
per interrupt until a continuous hardware clocksource is available.

Without this, we can run into a endless loop, where each cycle through
the loop, jiffies is updated which increments time by tick_period or
more (due to clock steering), which can cause the event programming to
think the next event was before the newly incremented time and fail
causing tick_periodic() to be called again and the whole process loops
forever.

[ Impact: prevent hard lock up ]

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org
2009-05-02 10:22:27 +02:00
Magnus Damm 4614e6adaf clocksource: add enable() and disable() callbacks
Add enable() and disable() callbacks for clocksources.

This allows us to put unused clocksources in power save mode.  The
functions clocksource_enable() and clocksource_disable() wrap the
callbacks and are inserted in the timekeeping code to enable before use
and disable after switching to a new clocksource.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21 13:41:47 -07:00
Magnus Damm 8e19608e8b clocksource: pass clocksource to read() callback
Pass clocksource pointer to the read() callback for clocksources.  This
allows us to share the callback between multiple instances.

[hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21 13:41:47 -07:00
Linus Torvalds 6671de344c Merge branch 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (26 commits)
  posix timers: fix RLIMIT_CPU && fork()
  time: ntp: fix bug in ntp_update_offset() & do_adjtimex(), fix
  time: ntp: clean up second_overflow()
  time: ntp: simplify ntp_tick_adj calculations
  time: ntp: make 64-bit constants more robust
  time: ntp: refactor do_adjtimex() some more
  time: ntp: refactor do_adjtimex()
  time: ntp: fix bug in ntp_update_offset() & do_adjtimex()
  time: ntp: micro-optimize ntp_update_offset()
  time: ntp: simplify ntp_update_offset_fll()
  time: ntp: refactor and clean up ntp_update_offset()
  time: ntp: refactor up ntp_update_frequency()
  time: ntp: clean up ntp_update_frequency()
  time: ntp: simplify the MAX_TICKADJ_SCALED definition
  time: ntp: simplify the second_overflow() code flow
  time: ntp: clean up kernel/time/ntp.c
  x86: hpet: stop HPET_COUNTER when programming periodic mode
  x86: hpet: provide separate functions to stop and start the counter
  x86: hpet: print HPET registers during setup (if hpet=verbose is used)
  time: apply NTP frequency/tick changes immediately
  ...
2009-03-26 16:05:42 -07:00
Ingo Molnar 7c526e1fef Merge branches 'timers/new-apis', 'timers/ntp' and 'timers/urgent' into timers/core 2009-03-26 15:45:52 +01:00
John Stultz a2a5ac8650 time: ntp: fix bug in ntp_update_offset() & do_adjtimex(), fix
The time_status conditional was accidentally placed right after we clear
the checked time_status bits, which causes us to take the conditional
every time through. This fixes it by moving the conditional to before we
clear the time_status bits.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Clark Williams <williams@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 19:39:47 +01:00
Ingo Molnar 39854fe8c1 time: ntp: clean up second_overflow()
Impact: cleanup, no functionality changed

The 'time_adj' local variable is named in a very confusing
way because it almost shadows the 'time_adjust' global
variable - which is used in this same function.

Rename it to 'delta' - to make them stand apart more clearly.

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2545	    114	    144	   2803	    af3	ntp.o.before
   2545	    114	    144	   2803	    af3	ntp.o.after

md5:
   1bf0b3be564512279ba7cee299d1d2be  ntp.o.before.asm
   1bf0b3be564512279ba7cee299d1d2be  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:17 +01:00
Ingo Molnar 069569e025 time: ntp: simplify ntp_tick_adj calculations
Impact: micro-optimization

Convert the (internal) ntp_tick_adj value we store from unscaled
units to scaled units. This is a constant that we never modify,
so scaling it up once during bootup is enough - we dont have to
do it for every adjustment step.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:16 +01:00
Ingo Molnar 2b9d1496e7 time: ntp: make 64-bit constants more robust
Impact: cleanup, no functionality changed

 - make PPM_SCALE an explicit s64 constant, to
   remove (s64) casts from usage sites.

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2536	    114	    136	   2786	    ae2	ntp.o.before
   2536	    114	    136	   2786	    ae2	ntp.o.after

md5:
   40a7728d1188aa18e83e21a81fa7b150  ntp.o.before.asm
   40a7728d1188aa18e83e21a81fa7b150  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:15 +01:00
Ingo Molnar e96291653b time: ntp: refactor do_adjtimex() some more
Impact: cleanup, no functionality changed

Further simplify do_adjtimex():

 - introduce the ntp_start_leap_timer() helper function
 - eliminate the goto adj_done complication

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:15 +01:00
Ingo Molnar 80f2257116 time: ntp: refactor do_adjtimex()
Impact: cleanup, no functionality changed

do_adjtimex() is currently a monster function with a maze of
branches. Refactor the txc->modes setting aspects of it into
two new helper functions:

	process_adj_status()
	process_adjtimex_modes()

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2512	    114	    136	   2762	    aca	ntp.o.before
   2512	    114	    136	   2762	    aca	ntp.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:14 +01:00
Ingo Molnar 10dd31a7a1 time: ntp: fix bug in ntp_update_offset() & do_adjtimex()
Impact: change (fix) the way the NTP PLL seconds offset is initialized/tracked

Fix a bug and do a micro-optimization:

When PLL is enabled we do not reset time_reftime. If the PLL
was off for a long time (for example after bootup), this is
arguably the wrong thing to do.

We already had a hack for the common boot-time case in
ntp_update_offset(), in form of:

	if (unlikely(time_status & STA_FREQHOLD || time_reftime == 0))
 		secs = 0;

But the update delta should be reset later on too - not just when
the PLL is enabled for the first time after bootup.

So do it on !STA_PLL -> STA_PLL transitions.

This changes behavior, as previously if ntpd was disabled for
a long time and we restarted it, we'd run from that last update,
with a very large delta.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:13 +01:00
Ingo Molnar c7986acba2 time: ntp: micro-optimize ntp_update_offset()
Impact: cleanup, no functionality changed

The time_reftime update in ntp_update_offset() to xtime.tv_sec
is a convoluted way of saying that we want to freeze the frequency
and want the 'secs' delta to be 0. Also make this branch unlikely.

This shaves off 8 bytes from the code size:

   text	   data	    bss	    dec	    hex	filename
   2504	    114	    136	   2754	    ac2	ntp.o.before
   2496	    114	    136	   2746	    aba	ntp.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:12 +01:00
Ingo Molnar 478b7aab16 time: ntp: simplify ntp_update_offset_fll()
Impact: cleanup, no functionality changed

Change ntp_update_offset_fll() to delta logic instead of
absolute value logic. This eliminates 'freq_adj' from the
function.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:12 +01:00
Ingo Molnar f939890b66 time: ntp: refactor and clean up ntp_update_offset()
Impact: cleanup, no functionality changed

- introduce the ntp_update_offset_fll() helper
- clean up the flow and variable naming

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2504	    114	    136	   2754	    ac2	ntp.o.before
   2504	    114	    136	   2754	    ac2	ntp.o.after

md5:
   01f7b8e1a5472a3056f9e4ae84d46315  ntp.o.before.asm
   01f7b8e1a5472a3056f9e4ae84d46315  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:11 +01:00
Ingo Molnar bc26c31d44 time: ntp: refactor up ntp_update_frequency()
Impact: cleanup, no functionality changed

Change ntp_update_frequency() from a hard to follow code
flow that uses global variables as temporaries, to a clean
input+output flow.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:10 +01:00
Ingo Molnar 9ce616aaef time: ntp: clean up ntp_update_frequency()
Impact: cleanup, no functionality changed

Prepare a refactoring of ntp_update_frequency().

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2504	    114	    136	   2754	    ac2	ntp.o.before
   2504	    114	    136	   2754	    ac2	ntp.o.after

md5:
   41f3009debc9b397d7394dd77d912f0a  ntp.o.before.asm
   41f3009debc9b397d7394dd77d912f0a  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:09 +01:00
Ingo Molnar bbd1267690 time: ntp: simplify the MAX_TICKADJ_SCALED definition
Impact: cleanup, no functionality changed

There's an ugly u64 typecase in the MAX_TICKADJ_SCALED definition,
this can be eliminated by making the MAX_TICKADJ constant's type
64-bit (signed).

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2504	    114	    136	   2754	    ac2	ntp.o.before
   2504	    114	    136	   2754	    ac2	ntp.o.after

md5:
   41f3009debc9b397d7394dd77d912f0a  ntp.o.before.asm
   41f3009debc9b397d7394dd77d912f0a  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:08 +01:00
Ingo Molnar 3c972c2444 time: ntp: simplify the second_overflow() code flow
Impact: cleanup, no functionality changed

Instead of a hierarchy of conditions, transform them to clean
gradual conditions and return's.

This makes the flow easier to read and makes the purpose of
the function easier to understand.

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2552	    170	    168	   2890	    b4a	ntp.o.before
   2552	    170	    168	   2890	    b4a	ntp.o.after

md5:
   eae1275df0b7d6290c13f6f6f8f05c8c  ntp.o.before.asm
   eae1275df0b7d6290c13f6f6f8f05c8c  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:07 +01:00
Ingo Molnar 53bbfa9e94 time: ntp: clean up kernel/time/ntp.c
Impact: cleanup, no functionality changed

Make this file a bit more readable by applying a consistent coding style.

No code changed:

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2552	    170	    168	   2890	    b4a	ntp.o.before
   2552	    170	    168	   2890	    b4a	ntp.o.after

md5:
   eae1275df0b7d6290c13f6f6f8f05c8c  ntp.o.before.asm
   eae1275df0b7d6290c13f6f6f8f05c8c  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:06 +01:00
john stultz fdcedf7b75 time: apply NTP frequency/tick changes immediately
Since the GENERIC_TIME changes landed, the adjtimex behavior changed
for struct timex.tick and .freq changed. When the tick or freq value
is set, we adjust the tick_length_base in ntp_update_frequency().
However, this new value doesn't get applied to tick_length until the
next second (via second_overflow).

This means some applications that do quick time tweaking do not see the
requested change made as quickly as expected.

I've run a few tests with this change, and ntpd still functions fine.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-19 10:10:08 +01:00
Patrick Ohly a75244c3d5 timecompare: generic infrastructure to map between two time bases
Mapping from a struct timecounter to a time returned by functions like
ktime_get_real() is implemented. This is sufficient to use this code
in a network device driver which wants to support hardware time
stamping and transformation of hardware time stamps to system time.

The interface could have been made more versatile by not depending on
a time counter, but this wasn't done to avoid writing glue code
elsewhere.

The method implemented here is the one used and analyzed under the name
"assisted PTP" in the LCI PTP paper:
http://www.linuxclustersinstitute.org/conferences/archive/2008/PDF/Ohly_92221.pdf

Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 22:43:32 -08:00
Patrick Ohly a038a353c3 clocksource: allow usage independent of timekeeping.c
So far struct clocksource acted as the interface between time/timekeeping.c
and hardware. This patch generalizes the concept so that a similar
interface can also be used in other contexts. For that it introduces
new structures and related functions *without* touching the existing
struct clocksource.

The reasons for adding these new structures to clocksource.[ch] are
* the APIs are clearly related
* struct clocksource could be cleaned up to use the new structs
* avoids proliferation of files with similar names (timesource.h?
  timecounter.h?)

As outlined in the discussion with John Stultz, this patch adds
* struct cyclecounter: stateless API to hardware which counts clock cycles
* struct timecounter: stateful utility code built on a cyclecounter which
  provides a nanosecond counter
* only the function to read the nanosecond counter; deltas are used internally
  and not exposed to users of timecounter

The code does no locking of the shared state. It must be called at least
as often as the cycle counter wraps around to detect these wrap arounds.
Both is the responsibility of the timecounter user.

Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 22:43:31 -08:00
Ingo Molnar 5ba1ae92b6 Merge branches 'timers/clockevents', 'timers/hpet', 'timers/hrtimers' and 'timers/urgent' into timers/core 2009-02-08 20:14:11 +01:00
Sebastien Dugue 94df7de028 hrtimers: allow the hot-unplugging of all cpus
Impact: fix CPU hotplug hang on Power6 testbox

On architectures that support offlining all cpus (at least powerpc/pseries),
hot-unpluging the tick_do_timer_cpu can result in a system hang.

This comes from the fact that if the cpu going down happens to be the
cpu doing the tick, then as the tick_do_timer_cpu handover happens after the
cpu is dead (via the CPU_DEAD notification), we're left without ticks,
jiffies are frozen and any task relying on timers (msleep, ...) is stuck.
That's particularly the case for the cpu looping in __cpu_die() waiting
for the dying cpu to be dead.

This patch addresses this by having the tick_do_timer_cpu handover happen
earlier during the CPU_DYING notification. For this, a new clockevent
notification type is introduced (CLOCK_EVT_NOTIFY_CPU_DYING) which is triggered
in hrtimer_cpu_notify().

Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30 22:35:29 +01:00
Magnus Damm 2d68259db2 clockevents: let set_mode() setup delta information
Allow the set_mode() clockevent callback to decide and fill in delta
details such as shift, mult, max_delta_ns and min_delta_ns.

With this change the clockevent can be registered without delta details
which allows us to keep the parent clock disabled until the clockevent
gets setup using set_mode().

Letting set_mode() fill in or update delta details allows us to save
power by disabling the parent clock while the clockevent is unused.
This may however make the parent clock rate change, so next time the
clockevent gets enabled we need let set_mode() to update the detla
details accordingly. Doing it at registration time is not enough.

Furthermore, the delta details seem unused in the case of periodic-only
clockevent drivers, so this change also allows registration of such
drivers without the delta details filled in.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-01-16 12:27:39 +01:00
Jaswinder Singh Rajput 934d96eafa time-sched.c: tick_nohz_update_jiffies should be static
Impact: cleanup, reduce kernel size a bit, avoid sparse warning

Fixes sparse warning:

 kernel/time/tick-sched.c:137:6: warning: symbol 'tick_nohz_update_jiffies' was not declared. Should it be static?

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-15 12:06:56 +01:00
Ingo Molnar e3ee1e1231 Merge commit 'v2.6.29-rc1' into timers/hrtimers
Conflicts:
	kernel/time/tick-common.c
2009-01-12 11:32:03 +01:00
Linus Torvalds 57c44c5f6f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
  trivial: chack -> check typo fix in main Makefile
  trivial: Add a space (and a comma) to a printk in 8250 driver
  trivial: Fix misspelling of "firmware" in docs for ncr53c8xx/sym53c8xx
  trivial: Fix misspelling of "firmware" in powerpc Makefile
  trivial: Fix misspelling of "firmware" in usb.c
  trivial: Fix misspelling of "firmware" in qla1280.c
  trivial: Fix misspelling of "firmware" in a100u2w.c
  trivial: Fix misspelling of "firmware" in megaraid.c
  trivial: Fix misspelling of "firmware" in ql4_mbx.c
  trivial: Fix misspelling of "firmware" in acpi_memhotplug.c
  trivial: Fix misspelling of "firmware" in ipw2100.c
  trivial: Fix misspelling of "firmware" in atmel.c
  trivial: Fix misspelled firmware in Kconfig
  trivial: fix an -> a typos in documentation and comments
  trivial: fix then -> than typos in comments and documentation
  trivial: update Jesper Juhl CREDITS entry with new email
  trivial: fix singal -> signal typo
  trivial: Fix incorrect use of "loose" in event.c
  trivial: printk: fix indentation of new_text_line declaration
  trivial: rtc-stk17ta8: fix sparse warning
  ...
2009-01-07 11:31:52 -08:00
Frederik Schwarzer 025dfdafe7 trivial: fix then -> than typos in comments and documentation
- (better, more, bigger ...) then -> (...) than

Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06 11:28:06 +01:00
Ingo Molnar d9be28ea91 Merge branches 'sched/clock', 'sched/cleanups' and 'linus' into sched/urgent 2009-01-06 09:33:57 +01:00
Linus Torvalds 7d3b56ba37 Merge branch 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits)
  x86: setup_per_cpu_areas() cleanup
  cpumask: fix compile error when CONFIG_NR_CPUS is not defined
  cpumask: use alloc_cpumask_var_node where appropriate
  cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t
  x86: use cpumask_var_t in acpi/boot.c
  x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids
  sched: put back some stack hog changes that were undone in kernel/sched.c
  x86: enable cpus display of kernel_max and offlined cpus
  ia64: cpumask fix for is_affinity_mask_valid()
  cpumask: convert RCU implementations, fix
  xtensa: define __fls
  mn10300: define __fls
  m32r: define __fls
  h8300: define __fls
  frv: define __fls
  cris: define __fls
  cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
  cpumask: zero extra bits in alloc_cpumask_var_node
  cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/
  cpumask: convert mm/
  ...
2009-01-03 12:04:39 -08:00
Linus Torvalds 61420f59a5 Merge branch 'cputime' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'cputime' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [PATCH] fast vdso implementation for CLOCK_THREAD_CPUTIME_ID
  [PATCH] improve idle cputime accounting
  [PATCH] improve precision of idle time detection.
  [PATCH] improve precision of process accounting.
  [PATCH] idle cputime accounting
  [PATCH] fix scaled & unscaled cputime accounting
2009-01-03 11:56:24 -08:00
Mike Travis 7eb1955336 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask into merge-rr-cpumask
Conflicts:
	arch/x86/kernel/io_apic.c
	kernel/rcuclassic.c
	kernel/sched.c
	kernel/time/tick-sched.c

Signed-off-by: Mike Travis <travis@sgi.com>
[ mingo@elte.hu: backmerged typo fix for io_apic.c ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03 18:53:31 +01:00
Linus Torvalds b840d79631 Merge branch 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits)
  x86: export vector_used_by_percpu_irq
  x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and()
  sched: nominate preferred wakeup cpu, fix
  x86: fix lguest used_vectors breakage, -v2
  x86: fix warning in arch/x86/kernel/io_apic.c
  sched: fix warning in kernel/sched.c
  sched: move test_sd_parent() to an SMP section of sched.h
  sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0
  sched: activate active load balancing in new idle cpus
  sched: bias task wakeups to preferred semi-idle packages
  sched: nominate preferred wakeup cpu
  sched: favour lower logical cpu number for sched_mc balance
  sched: framework for sched_mc/smt_power_savings=N
  sched: convert BALANCE_FOR_xx_POWER to inline functions
  x86: use possible_cpus=NUM to extend the possible cpus allowed
  x86: fix cpu_mask_to_apicid_and to include cpu_online_mask
  x86: update io_apic.c to the new cpumask code
  x86: Introduce topology_core_cpumask()/topology_thread_cpumask()
  x86: xen: use smp_call_function_many()
  x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c
  ...

Fixed up trivial conflict in kernel/time/tick-sched.c manually
2009-01-02 11:44:09 -08:00
Rusty Russell 5db0e1e9e0 cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/
Impact: cleanup

Simple replacement, now the _nr is redundant.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Ingo Molnar <mingo@redhat.com>
2009-01-01 10:12:29 +10:30
Rusty Russell 6b954823c2 cpumask: convert kernel time functions
Impact: Use new APIs

Convert kernel/time functions to use struct cpumask *.

Note the ugly bitmap declarations in tick-broadcast.c.  These should
be cpumask_var_t, but there was no obvious initialization function to
put the alloc_cpumask_var() calls in.  This was safe.

(Eventually 'struct cpumask' will be undefined for CONFIG_CPUMASK_OFFSTACK,
so we use a bitmap here to show we really mean it).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
2009-01-01 10:12:25 +10:30
Martin Schwidefsky 79741dd357 [PATCH] idle cputime accounting
The cpu time spent by the idle process actually doing something is
currently accounted as idle time. This is plain wrong, the architectures
that support VIRT_CPU_ACCOUNTING=y can do better: distinguish between the
time spent doing nothing and the time spent by idle doing work. The first
is accounted with account_idle_time and the second with account_system_time.
The architectures that use the account_xxx_time interface directly and not
the account_xxx_ticks interface now need to do the check for the idle
process in their arch code. In particular to improve the system vs true
idle time accounting the arch code needs to measure the true idle time
instead of just testing for the idle process.
To improve the tick based accounting as well we would need an architecture
primitive that can tell us if the pt_regs of the interrupted context
points to the magic instruction that halts the cpu.

In addition idle time is no more added to the stime of the idle process.
This field now contains the system time of the idle process as it should
be. On systems without VIRT_CPU_ACCOUNTING this will always be zero as
every tick that occurs while idle is running will be accounted as idle
time.

This patch contains the necessary common code changes to be able to
distinguish idle system time and true idle time. The architectures with
support for VIRT_CPU_ACCOUNTING need some changes to exploit this.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-31 15:11:46 +01:00
Martin Schwidefsky 457533a7d3 [PATCH] fix scaled & unscaled cputime accounting
The utimescaled / stimescaled fields in the task structure and the
global cpustat should be set on all architectures. On s390 the calls
to account_user_time_scaled and account_system_time_scaled never have
been added. In addition system time that is accounted as guest time
to the user time of a process is accounted to the scaled system time
instead of the scaled user time.
To fix the bugs and to prevent future forgetfulness this patch merges
account_system_time_scaled into account_system_time and
account_user_time_scaled into account_user_time.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Michael Neuling <mikey@neuling.org>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-31 15:11:46 +01:00
Rusty Russell 2ca1a61583 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	arch/x86/kernel/io_apic.c
2008-12-31 23:05:57 +10:30
Thomas Gleixner 1c5745aa38 sched_clock: prevent scd->clock from moving backwards, take #2
Redo:

  5b7dba4: sched_clock: prevent scd->clock from moving backwards

which had to be reverted due to s2ram hangs:

  ca7e716: Revert "sched_clock: prevent scd->clock from moving backwards"

... this time with resume restoring GTOD later in the sequence
taken into account as well.

The "timekeeping_suspended" flag is not very nice but we cannot call into
GTOD before it has been properly resumed and the scheduler will run very
early in the resume sequence.

Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-31 09:53:21 +01:00
Sebastien Dugue 5762ba1873 hrtimers: allow the hot-unplugging of all cpus
Impact: fix CPU hotplug hang on Power6 testbox

On architectures that support offlining all cpus (at least powerpc/pseries),
hot-unpluging the tick_do_timer_cpu can result in a system hang.

This comes from the fact that if the cpu going down happens to be the
cpu doing the tick, then as the tick_do_timer_cpu handover happens after the
cpu is dead (via the CPU_DEAD notification), we're left without ticks,
jiffies are frozen and any task relying on timers (msleep, ...) is stuck.
That's particularly the case for the cpu looping in __cpu_die() waiting
for the dying cpu to be dead.

This patch addresses this by having the tick_do_timer_cpu handover happen
earlier during the CPU_DYING notification. For this, a new clockevent
notification type is introduced (CLOCK_EVT_NOTIFY_CPU_DYING) which is triggered
in hrtimer_cpu_notify().

Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-30 07:37:19 +01:00
Ingo Molnar 32e8d18683 Merge branches 'timers/clocksource', 'timers/hpet', 'timers/hrtimers', 'timers/nohz', 'timers/ntp', 'timers/posixtimers' and 'timers/rtc' into timers/core 2008-12-25 18:02:25 +01:00
Rusty Russell 968ea6d80e Merge ../linux-2.6-x86
Conflicts:

	arch/x86/kernel/io_apic.c
	kernel/sched.c
	kernel/sched_stats.h
2008-12-13 21:55:51 +10:30
Rusty Russell 320ab2b0b1 cpumask: convert struct clock_event_device to cpumask pointers.
Impact: change calling convention of existing clock_event APIs

struct clock_event_timer's cpumask field gets changed to take pointer,
as does the ->broadcast function.

Another single-patch change.  For safety, we BUG_ON() in
clockevents_register_device() if it's not set.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
2008-12-13 21:20:26 +10:30
Rusty Russell 0de26520c7 cpumask: make irq_set_affinity() take a const struct cpumask
Impact: change existing irq_chip API

Not much point with gentle transition here: the struct irq_chip's
setaffinity method signature needs to change.

Fortunately, not widely used code, but hits a few architectures.

Note: In irq_select_affinity() I save a temporary in by mangling
irq_desc[irq].affinity directly.  Ingo, does this break anything?

(Folded in fix from KOSAKI Motohiro)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Acked-by: Ingo Molnar <mingo@redhat.com>
Cc: ralf@linux-mips.org
Cc: grundler@parisc-linux.org
Cc: jeremy@xensource.com
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
2008-12-13 21:20:26 +10:30
Woodruff, Richard 001474491f nohz: suppress needless timer reprogramming
In my device I get many interrupts from a high speed USB device in a very
short period of time.  The system spends a lot of time reprogramming the
hardware timer which is in a slower timing domain as compared to the CPU. 
This results in the CPU spending a huge amount of time waiting for the
timer posting to be done.  All of this reprogramming is useless as the
wake up time has not changed.

As measured using ETM trace this drops my reprogramming penalty from
almost 60% CPU load down to 15% during high interrupt rate.  I can send
traces to show this.

Suppress setting of duplicate timer event when timer already stopped. 
Timer programming can be very costly and can result in long cpu stall/wait
times.

[akpm@linux-foundation.org: coding-style fixes]
[tglx@linutronix.de: move the check to the right place and avoid raising
		     the softirq for nothing]

Signed-off-by: Richard Woodruff <r-woodruff2@ti.com>
Cc: johnstul@us.ibm.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-12-12 16:55:31 +01:00
Ingo Molnar 45ab6b0c76 Merge branch 'sched/core' into cpus4096
Conflicts:
	include/linux/ftrace.h
	kernel/sched.c
2008-12-12 13:48:57 +01:00
Heiko Carstens fa116ea35e nohz: no softirq pending warnings for offline cpus
Impact: remove false positive warning

After a cpu was taken down during cpu hotplug (read: disabled for interrupts)
it still might have pending softirqs. However take_cpu_down makes sure
that the idle task will run next instead of ksoftirqd on the taken down cpu.
The idle task will call tick_nohz_stop_sched_tick which might warn about
pending softirqs just before the cpu kills itself completely.

However the pending softirqs on the dead cpu aren't a problem because they
will be moved to an online cpu during CPU_DEAD handling.

So make sure we warn only for online cpus.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-12 07:27:01 +01:00
john stultz 6c9bacb41c time: catch xtime_nsec underflows and fix them
Impact: fix time warp bug

Alex Shi, along with Yanmin Zhang have been noticing occasional time
inconsistencies recently. Through their great diagnosis, they found that
the xtime_nsec value used in update_wall_time was occasionally going
negative. After looking through the code for awhile, I realized we have
the possibility for an underflow when three conditions are met in
update_wall_time():

  1) We have accumulated a second's worth of nanoseconds, so we
     incremented xtime.tv_sec and appropriately decrement xtime_nsec.
     (This doesn't cause xtime_nsec to go negative, but it can cause it
      to be small).

  2) The remaining offset value is large, but just slightly less then
     cycle_interval.

  3) clocksource_adjust() is speeding up the clock, causing a
     corrective amount (compensating for the increase in the multiplier
     being multiplied against the unaccumulated offset value) to be
     subtracted from xtime_nsec.

This can cause xtime_nsec to underflow.

Unfortunately, since we notify the NTP subsystem via second_overflow()
whenever we accumulate a full second, and this effects the error
accumulation that has already occured, we cannot simply revert the
accumulated second from xtime nor move the second accumulation to after
the clocksource_adjust call without a change in behavior.

This leaves us with (at least) two options:

1) Simply return from clocksource_adjust() without making a change if we
   notice the adjustment would cause xtime_nsec to go negative.

This would work, but I'm concerned that if a large adjustment was needed
(due to the error being large), it may be possible to get stuck with an
ever increasing error that becomes too large to correct (since it may
always force xtime_nsec negative). This may just be paranoia on my part.

2) Catch xtime_nsec if it is negative, then add back the amount its
   negative to both xtime_nsec and the error.

This second method is consistent with how we've handled earlier rounding
issues, and also has the benefit that the error being added is always in
the oposite direction also always equal or smaller then the correction
being applied. So the risk of a corner case where things get out of
control is lessened.

This patch fixes bug 11970, as tested by Yanmin Zhang
http://bugzilla.kernel.org/show_bug.cgi?id=11970

Reported-by: alex.shi@intel.com
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Acked-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Tested-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04 08:43:02 +01:00
Peter Zijlstra ca109491f6 hrtimer: removing all ur callback modes
Impact: cleanup, move all hrtimer processing into hardirq context

This is an attempt at removing some of the hrtimer complexity by
reducing the number of callback modes to 1.

This means that all hrtimer callback functions will be ran from HARD-irq
context.

I went through all the 30 odd hrtimer callback functions in the kernel
and saw only one that I'm not quite sure of, which is the one in
net/can/bcm.c - hence I'm CC-ing the folks responsible for that code.

Furthermore, the hrtimer core now calls callbacks directly with IRQs
disabled in case you try to enqueue an expired timer. If this timer is a
periodic timer (which should use hrtimer_forward() to advance its time)
then it might be possible to end up in an inf. recursive loop due to the
fact that hrtimer_forward() doesn't round up to the next timer
granularity, and therefore keeps on calling the callback - obviously
this needs a fix.

Aside from that, this seems to compile and actually boot on my dual core
test box - although I'm sure there are some bugs in, me not hitting any
makes me certain :-)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-25 15:45:46 +01:00
Rusty Russell 6a7b3dc344 sched: convert nohz_cpu_mask to cpumask_var_t.
Impact: (future) size reduction for large NR_CPUS.

Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
space for small nr_cpu_ids but big CONFIG_NR_CPUS.  cpumask_var_t
is just a struct cpumask for !CONFIG_CPUMASK_OFFSTACK.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 17:51:10 +01:00
Thomas Gleixner ae99286b4f nohz: disable tick_nohz_kick_tick() for now
Impact: nohz powersavings and wakeup regression

commit fb02fbc14d (NOHZ: restart tick
device from irq_enter()) causes a serious wakeup regression.

While the patch is correct it does not take into account that spurious
wakeups happen on x86. A fix for this issue is available, but we just
revert to the .27 behaviour and let long running softirqs screw
themself.

Disable it for now.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-11-10 22:39:27 +01:00
Thomas Gleixner 268a3dcfea Merge branch 'timers/range-hrtimers' into v28-range-hrtimers-for-linus-v2
Conflicts:

	kernel/time/tick-sched.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-22 09:48:06 +02:00
Thomas Gleixner c4bd822e7b NOHZ: fix thinko in the timer restart code path
commit fb02fbc14d (NOHZ: restart tick
device from irq_enter())

solves the problem of stale jiffies when long running softirqs happen
in a long idle sleep period, but it has a major thinko in it:

When the interrupt which came in _is_ the timer interrupt which should
expire ts->sched_timer then we cancel and rearm the timer _before_ it
gets expired in hrtimer_interrupt() to the next period. That means the
call back function is not called. This game can go on for ever :(

Prevent this by making sure to only rearm the timer when the expiry
time is more than one tick_period away. Otherwise keep it running as
it is either already expired or will expiry at the right point to
update jiffies.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Venkatesch Pallipadi <venkatesh.pallipadi@intel.com>
2008-10-21 20:53:24 +02:00
Thomas Gleixner c465a76af6 Merge branches 'timers/clocksource', 'timers/hrtimers', 'timers/nohz', 'timers/ntp', 'timers/posixtimers' and 'timers/debug' into v28-timers-for-linus 2008-10-20 13:14:06 +02:00
Thomas Gleixner 870e2a2845 timer_list: add base address to clock base
The base address of a (per cpu) clock base is a useful debug info.
Add it and bump the version number of timer_lists.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-20 11:51:30 +02:00
Thomas Gleixner c5b77a3d3a timer_list: print cpu number of clockevents device
The per cpu clock events device output of timer_list lacks an
association of the device to the cpu which is annoying when looking at
the output of /proc/timer_list from a 128 way system. 

Add the CPU number info and mark the broadcast device in the device
list printout.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-20 11:51:30 +02:00
Thomas Gleixner e67ef25a35 timer_list: print real timer address
The current timer_list output prints the address of the on stack copy
of the active hrtimer instead of the hrtimer itself.

Print the address of the real timer instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-20 11:51:30 +02:00
Arjan van de Ven 651dab4264 Merge commit 'linus/master' into merge-linus
Conflicts:

	arch/x86/kvm/i8254.c
2008-10-17 09:20:26 -07:00
Thomas Gleixner fb02fbc14d NOHZ: restart tick device from irq_enter()
We did not restart the tick device from irq_enter() to avoid double
reprogramming and extra events in the return immediate to idle case.

But long lasting softirqs can lead to a situation where jiffies become
stale:

idle()
  tick stopped (reprogrammed to next pending timer)
  halt()
   interrupt
     jiffies updated from irq_enter()
     interrupt handler
     softirq function 1 runs 20ms
     softirq function 2 arms a 10ms timer with a stale jiffies value
     jiffies updated from irq_exit()
     timer wheel has now an already expired timer
     (the one added in function 2)
     timer fires and timer softirq runs

This was discovered when debugging a timer problem which happend only
when the ath5k driver is active. The debugging proved that there is a
softirq function running for more than 20ms, which is a bug by itself.

To solve this we restart the tick timer right from irq_enter(), but do
not go through the other functions which are necessary to return from
idle when need_resched() is set.

Reported-by: Elias Oltmanns <eo@nebensachen.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Elias Oltmanns <eo@nebensachen.de>
2008-10-17 18:13:38 +02:00
Thomas Gleixner c34bec5a44 NOHZ: split tick_nohz_restart_sched_tick()
Split out the clock event device reprogramming. Preparatory
patch.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-17 18:13:38 +02:00
Thomas Gleixner 719254faa1 NOHZ: unify the nohz function calls in irq_enter()
We have two separate nohz function calls in irq_enter() for no good
reason. Just call a single NOHZ function from irq_enter() and call
the bits in the tick code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-17 18:13:38 +02:00
Linus Torvalds e533b22705 Merge branch 'core-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  do_generic_file_read: s/EINTR/EIO/ if lock_page_killable() fails
  softirq, warning fix: correct a format to avoid a warning
  softirqs, debug: preemption check
  x86, pci-hotplug, calgary / rio: fix EBDA ioremap()
  IO resources, x86: ioremap sanity check to catch mapping requests exceeding, fix
  IO resources, x86: ioremap sanity check to catch mapping requests exceeding the BAR sizes
  softlockup: Documentation/sysctl/kernel.txt: fix softlockup_thresh description
  dmi scan: warn about too early calls to dmi_check_system()
  generic: redefine resource_size_t as phys_addr_t
  generic: make PFN_PHYS explicitly return phys_addr_t
  generic: add phys_addr_t for holding physical addresses
  softirq: allocate less vectors
  IO resources: fix/remove printk
  printk: robustify printk, update comment
  printk: robustify printk, fix #2
  printk: robustify printk, fix
  printk: robustify printk

Fixed up conflicts in:
	arch/powerpc/include/asm/types.h
	arch/powerpc/platforms/Kconfig.cputype
manually.
2008-10-16 15:17:40 -07:00
Jan Beulich 9ba16087d9 Kconfig: eliminate "def_bool n" constructs
Using "def_bool n" is pointless, simply using bool here appears more
appropriate.

Further, retaining such options that don't have a prompt and aren't
selected by anything seems also at least questionable.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:31 -07:00
Ingo Molnar 6b2ada8210 Merge branches 'core/softlockup', 'core/softirq', 'core/resources', 'core/printk' and 'core/misc' into core-v28-for-linus 2008-10-15 12:48:44 +02:00
venkatesh.pallipadi@intel.com 8083e4ad97 [CPUFREQ][5/6] cpufreq: Changes to get_cpu_idle_time_us(), used by ondemand governor
export get_cpu_idle_time_us() for it to be used in ondemand governor.
Last update time can be current time when the CPU is currently non-idle,
accounting for the busy time since last idle.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09 13:52:44 -04:00
Thomas Gleixner 07454bfff1 clockevents: check broadcast tick device not the clock events device
Impact: jiffies increment too fast.

Hugh Dickins noted that with NOHZ=n and HIGHRES=n jiffies get
incremented too fast. The reason is a wrong check in the broadcast
enter/exit code, which keeps the local apic timer in periodic mode
when the switch happens.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-04 10:51:07 +02:00
Thomas Gleixner ccc7dadf73 hrtimer: prevent migration of per CPU hrtimers
Impact: per CPU hrtimers can be migrated from a dead CPU

The hrtimer code has no knowledge about per CPU timers, but we need to
prevent the migration of such timers and warn when such a timer is
active at migration time.

Explicitely mark the timers as per CPU and use a more understandable
mode descriptor for the interrupts safe unlocked callback mode, which
is used by hrtimer_sleeper and the scheduler code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-29 17:09:14 +02:00
Roman Zippel d40e944c25 ntp: improve adjtimex frequency rounding
Change PPM_SCALE_INV_SHIFT so that it doesn't throw away any input bits
(19 is the amount of the factor 2 in PPM_SCALE), the output frequency
can then be calculated back to its input value, as the inverse divide
produce a slightly larger value, which is then correctly rounded by the
final shift.

Reported-by: Martin Ziegler <ziegler@uni-freiburg.de>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-24 17:33:13 +02:00
Roman Zippel 5cd1c9c5cf timekeeping: fix rounding problem during clock update
Due to a rounding problem during a clock update it's possible for readers
to observe the clock jumping back by 1nsec.  The following simplified
example demonstrates the problem:

cycle	xtime
0	0
1000	999999.6
2000	1999999.2
3000	2999998.8
...

1500 =	1499999.4
=	0.0 + 1499999.4
=	999999.6 + 499999.8

When reading the clock only the full nanosecond part is used, while
timekeeping internally keeps nanosecond fractions.  If the clock is now
updated at cycle 1500 here, a nanosecond is missing due to the truncation.

The simple fix is to round up the xtime value during the update, this also
changes the distance to the reference time, but the adjustment will
automatically take care that it stays under control.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-24 17:33:13 +02:00
Maciej W. Rozycki eb3f938fd6 ntp: let update_persistent_clock() sleep
This is a change that makes the 11-minute RTC update be run in the process
context.  This is so that update_persistent_clock() can sleep, which may
be required for certain types of RTC hardware -- most notably I2C devices.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-24 17:33:12 +02:00
Ingo Molnar f8e256c687 timers: fix build error in !oneshot case
kernel/time/tick-common.c: In function ‘tick_setup_periodic’:
 kernel/time/tick-common.c:113: error: implicit declaration of function ‘tick_broadcast_oneshot_active’

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-23 12:57:00 +02:00
Thomas Gleixner 27ce4cb4a0 clockevents: prevent mode mismatch on cpu online
Impact: timer hang on CPU online observed on AMD C1E systems

When a CPU is brought online then the broadcast machinery can
be in the one shot state already. Check this and setup the timer 
device of the new CPU in one shot mode so the broadcast code
can pick up the next_event value correctly.

Another AMD C1E oddity, as we switch to broadcast immediately and
not after the full bring up via the ACPI cpu idle code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-23 11:38:53 +02:00
Thomas Gleixner 302745699c clockevents: check broadcast device not tick device
Impact: Possible hang on CPU online observed on AMD C1E machines.

The broadcast setup code looks at the mode of the tick device to
determine whether it needs to be shut down or setup. This is wrong
when the broadcast mode is set to one shot already. This can happen
when a CPU is brought online as it goes through the periodic setup
first.

The problem went unnoticed as sane systems do not call into that code
before the switch to one shot for the clock event device happens.
The AMD C1E idle routine switches over immediately and thereby shuts
down the just setup device before the first interrupt happens.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-23 11:38:53 +02:00
Thomas Gleixner 49d670fb8d clockevents: prevent stale tick_next_period for onlining CPUs
Impact: possible hang on CPU onlining in timer one shot mode.

The tick_next_period variable is only used during boot on nohz/highres
enabled systems, but for CPU onlining it needs to be maintained when
the per cpu clock events device operates in one shot mode.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-23 11:38:53 +02:00
Thomas Gleixner 6441402b1f clockevents: prevent cpu online to interfere with nohz
Impact: rare hang which can be triggered on CPU online.

tick_do_timer_cpu keeps track of the CPU which updates jiffies
via do_timer. The value -1 is used to signal, that currently no
CPU is doing this. There are two cases, where the variable can 
have this state:

 boot:
    necessary for systems where the boot cpu id can be != 0

 nohz long idle sleep:
    When the CPU which did the jiffies update last goes into
    a long idle sleep it drops the update jiffies duty so
    another CPU which is not idle can pick it up and keep
    jiffies going.

Using the same value for both situations is wrong, as the CPU online
code can see the -1 state when the timer of the newly onlined CPU is
setup. The setup for a newly onlined CPU goes through periodic mode
and can pick up the do_timer duty without being aware of the nohz /
highres mode of the already running system.

Use two separate states and make them constants to avoid magic
numbers confusion. 

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-23 11:38:52 +02:00
Thomas Gleixner 2344abbcbd clockevents: make device shutdown robust
The device shut down does not cleanup the next_event variable of the
clock event device. So when the device is reactivated the possible
stale next_event value can prevent the device to be reprogrammed as it
claims to wait on a event already.

This is the root cause of the resurfacing suspend/resume problem,
where systems need key press to come back to life.

Fix this by setting next_event to KTIME_MAX when the device is shut
down. Use a separate function for shutdown which takes care of that
and only keep the direct set mode call in the broadcast code, where we
can not touch the next_event value.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-16 13:47:02 -07:00
Thomas Gleixner 61c22c34c6 clockevents: remove WARN_ON which was used to gather information
The issue of the endless reprogramming loop due to a too small
min_delta_ns was fixed with the previous updates of the clock events
code, but we had no information about the spread of this problem. I
added a WARN_ON to get automated information via kerneloops.org and to
get some direct reports, which allowed me to analyse the affected
machines.

The WARN_ON has served its purpose and would be annoying for a release
kernel. Remove it and just keep the information about the increase of
the min_delta_ns value.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-09 22:20:01 +02:00
Arjan van de Ven 704af52bd1 hrtimer: show the timer ranges in /proc/timer_list
to help debugging and visibility of timer ranges, show them
in the existing timer list in /proc/timer_list

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-09-07 16:10:20 -07:00
Linus Torvalds f532522565 Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clocksource, acpi_pm.c: check for monotonicity
  clocksource, acpi_pm.c: use proper read function also in errata mode
  ntp: fix calculation of the next jiffie to trigger RTC sync
  x86: HPET: read back compare register before reading counter
  x86: HPET fix moronic 32/64bit thinko
  clockevents: broadcast fixup possible waiters
  HPET: make minimum reprogramming delta useful
  clockevents: prevent endless loop lockup
  clockevents: prevent multiple init/shutdown
  clockevents: enforce reprogram in oneshot setup
  clockevents: prevent endless loop in periodic broadcast handler
  clockevents: prevent clockevent event_handler ending up handler_noop
2008-09-06 19:33:26 -07:00
Maciej W. Rozycki 4ff4b9e19a ntp: fix calculation of the next jiffie to trigger RTC sync
We have a bug in the calculation of the next jiffie to trigger the RTC
synchronisation.  The aim here is to run sync_cmos_clock() as close as
possible to the middle of a second.  Which means we want this function to
be called less than or equal to half a jiffie away from when now.tv_nsec
equals 5e8 (500000000).

If this is not the case for a given call to the function, for this purpose
instead of updating the RTC we calculate the offset in nanoseconds to the
next point in time where now.tv_nsec will be equal 5e8.  The calculated
offset is then converted to jiffies as these are the unit used by the
timer.

Hovewer timespec_to_jiffies() used here uses a ceil()-type rounding mode,
where the resulting value is rounded up.  As a result the range of
now.tv_nsec when the timer will trigger is from 5e8 to 5e8 + TICK_NSEC
rather than the desired 5e8 - TICK_NSEC / 2 to 5e8 + TICK_NSEC / 2.

As a result if for example sync_cmos_clock() happens to be called at the
time when now.tv_nsec is between 5e8 + TICK_NSEC / 2 and 5e8 to 5e8 +
TICK_NSEC, it will simply be rescheduled HZ jiffies later, falling in the
same range of now.tv_nsec again.  Similarly for cases offsetted by an
integer multiple of TICK_NSEC.

This change addresses the problem by subtracting TICK_NSEC / 2 from the
nanosecond offset to the next point in time where now.tv_nsec will be
equal 5e8, effectively shifting the following rounding in
timespec_to_jiffies() so that it produces a rounded-to-nearest result.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06 15:31:48 +02:00
Ingo Molnar 77dd3b3bd2 Merge branch 'linus' into timers/ntp 2008-09-06 15:31:03 +02:00
Thomas Gleixner 7300711e8c clockevents: broadcast fixup possible waiters
Until the C1E patches arrived there where no users of periodic broadcast
before switching to oneshot mode. Now we need to trigger a possible
waiter for a periodic broadcast when switching to oneshot mode.
Otherwise we can starve them for ever.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-06 07:21:17 +02:00
Arjan van de Ven cc584b213f hrtimer: convert kernel/* to the new hrtimer apis
In order to be able to do range hrtimers we need to use accessor functions
to the "expire" member of the hrtimer struct.
This patch converts kernel/* to these accessors.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-09-05 21:35:13 -07:00
Peter Zijlstra 56c7426b39 sched_clock: fix NOHZ interaction
If HLT stops the TSC, we'll fail to account idle time, thereby inflating the
actual process times. Fix this by re-calibrating the clock against GTOD when
leaving nohz mode.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05 18:14:08 +02:00
Thomas Gleixner 1fb9b7d29d clockevents: prevent endless loop lockup
The C1E/HPET bug reports on AMDX2/RS690 systems where tracked down to a
too small value of the HPET minumum delta for programming an event.

The clockevents code needs to enforce an interrupt event on the clock event
device in some cases. The enforcement code was stupid and naive, as it just
added the minimum delta to the current time and tried to reprogram the device.
When the minimum delta is too small, then this loops forever.

Add a sanity check. Allow reprogramming to fail 3 times, then print a warning
and double the minimum delta value to make sure, that this does not happen again.
Use the same function for both tick-oneshot and tick-broadcast code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05 11:11:53 +02:00
Thomas Gleixner 9c17bcda99 clockevents: prevent multiple init/shutdown
While chasing the C1E/HPET bugreports I went through the clock events
code inch by inch and found that the broadcast device can be initialized
and shutdown multiple times. Multiple shutdowns are not critical, but
useless waste of time. Multiple initializations are simply broken. Another
CPU might have the device in use already after the first initialization and
the second init could just render it unusable again.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05 11:11:52 +02:00
Thomas Gleixner 7205656ab4 clockevents: enforce reprogram in oneshot setup
In tick_oneshot_setup we program the device to the given next_event,
but we do not check the return value. We need to make sure that the
device is programmed enforced so the interrupt handler engine starts
working. Split out the reprogramming function from tick_program_event()
and call it with the device, which was handed in to tick_setup_oneshot().
Set the force argument, so the devices is firing an interrupt.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05 11:11:52 +02:00
Thomas Gleixner d4496b3955 clockevents: prevent endless loop in periodic broadcast handler
The reprogramming of the periodic broadcast handler was broken,
when the first programming returned -ETIME. The clockevents code
stores the new expiry value in the clock events device next_event field
only when the programming time has not been elapsed yet. The loop in
question calculates the new expiry value from the next_event value
and therefor never increases.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05 11:11:51 +02:00
Venkatesh Pallipadi 7c1e768974 clockevents: prevent clockevent event_handler ending up handler_noop
There is a ordering related problem with clockevents code, due to which
clockevents_register_device() called after tickless/highres switch
will not work. The new clockevent ends up with clockevents_handle_noop as
event handler, resulting in no timer activity.

The problematic path seems to be

* old device already has hrtimer_interrupt as the event_handler
* new clockevent device registers with a higher rating
* tick_check_new_device() is called
  * clockevents_exchange_device() gets called
    * old->event_handler is set to clockevents_handle_noop
  * tick_setup_device() is called for the new device
    * which sets new->event_handler using the old->event_handler which is noop.

Change the ordering so that new device inherits the proper handler.

This does not have any issue in normal case as most likely all the clockevent
devices are setup before the highres switch. But, can potentially be affecting
some corner case where HPET force detect happens after the highres switch.
This was a problem with HPET in MSI mode code that we have been experimenting
with.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05 11:11:51 +02:00
Roman Zippel 916c7a8551 ntp: fix ADJ_OFFSET_SS_READ bug and do_adjtimex() cleanup
Thanks to the review by Michael Kerrisk a bug in the recent
ADJ_OFFSET_SS_READ option was discovered, where the ntp time_offset was
inadvertently set by it.  This fixes this by making the adjtime code
more separate from the ntp_adjtime code (both of which really want to
be separate syscalls).

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22 06:40:18 +02:00
Miao Xie 3c4fbe5e01 nohz: fix wrong event handler after online an offlined cpu
On the tickless system(CONFIG_NO_HZ=y and CONFIG_HIGH_RES_TIMERS=n), after
I made an offlined cpu online, I found this cpu's event handler was
tick_handle_periodic, not tick_nohz_handler.

After debuging, I found this bug was caused by the wrong tick mode.  the
tick mode is not changed to NOHZ_MODE_INACTIVE when the cpu is offline.

This patch fixes this bug.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21 09:54:06 +02:00
John Stultz 2d42244ae7 clocksource: introduce CLOCK_MONOTONIC_RAW
In talking with Josip Loncaric, and his work on clock synchronization (see
btime.sf.net), he mentioned that for really close synchronization, it is
useful to have access to "hardware time", that is a notion of time that is
not in any way adjusted by the clock slewing done to keep close time sync.

Part of the issue is if we are using the kernel's ntp adjusted
representation of time in order to measure how we should correct time, we
can run into what Paul McKenney aptly described as "Painting a road using
the lines we're painting as the guide".

I had been thinking of a similar problem, and was trying to come up with a
way to give users access to a purely hardware based time representation
that avoided users having to know the underlying frequency and mask values
needed to deal with the wide variety of possible underlying hardware
counters.

My solution is to introduce CLOCK_MONOTONIC_RAW.  This exposes a
nanosecond based time value, that increments starting at bootup and has no
frequency adjustments made to it what so ever.

The time is accessed from userspace via the posix_clock_gettime() syscall,
passing CLOCK_MONOTONIC_RAW as the clock_id.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21 09:50:24 +02:00
Roman Zippel 9a055117d3 clocksource: introduce clocksource_forward_now()
To keep the raw monotonic patch simple first introduce
clocksource_forward_now(), which takes care of the offset since the last
update_wall_time() call and adds it to the clock, so there is no need
anymore to deal with it explicitly at various places, which need to make
significant changes to the clock.

This is also gets rid of the timekeeping_suspend_nsecs, instead of
waiting until resume, the value is accumulated during suspend. In the end
there is only a single user of __get_nsec_offset() left, so I integrated
it back to getnstimeofday().

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21 09:50:24 +02:00
John Stultz 1aa5dfb751 clocksource: keep track of original clocksource frequency
The clocksource frequency is represented by
clocksource->mult/2^(clocksource->shift).  Currently, when NTP makes
adjustments to the clock frequency, they are made directly to the mult
value.

This has the drawback that once changed, we cannot know what the orignal
mult value was, or how much adjustment has been applied.

This property causes problems in calculating proper ntp intervals when
switching back and forth between clocksources.

This patch separates the current mult value into a mult and mult_orig
pair.  The mult_orig value stays constant, while the ntp clocksource
adjustments are done only to the mult value.

This allows for correct ntp interval calculation and additionally lays the
groundwork for a new notion of time, what I'm calling the monotonic-raw
time, which is introduced in a following patch.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21 09:50:23 +02:00
Peter Zijlstra b845b517b5 printk: robustify printk
Avoid deadlocks against rq->lock and xtime_lock by deferring the klogd
wakeup by polling from the timer tick.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11 13:46:53 +02:00
Ingo Molnar e4e4e534fa sched clock: revert various sched_clock() changes
Found an interactivity problem on a quad core test-system - simple
CPU loops would occasionally delay the system un an unacceptable way.

After much debugging with Peter Zijlstra it turned out that the problem
is caused by the string of sched_clock() changes - they caused the CPU
clock to jump backwards a bit - which confuses the scheduler arithmetics.

(which is unsigned for performance reasons)

So revert:

 # c300ba2: sched_clock: and multiplier for TSC to gtod drift
 # c0c8773: sched_clock: only update deltas with local reads.
 # af52a90: sched_clock: stop maximum check on NO HZ
 # f7cce27: sched_clock: widen the max and min time

This solves the interactivity problems.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Mike Galbraith <efault@gmx.de>
2008-07-31 17:20:29 +02:00
Mike Travis 0bc3cc03fa cpumask: change cpumask_of_cpu_ptr to use new cpumask_of_cpu
* Replace previous instances of the cpumask_of_cpu_ptr* macros
    with a the new (lvalue capable) generic cpumask_of_cpu().

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26 16:40:33 +02:00
Linus Torvalds ecc8b655b3 Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  nohz: adjust tick_nohz_stop_sched_tick() call of s390 as well
  nohz: prevent tick stop outside of the idle loop
2008-07-24 12:55:01 -07:00
Linus Torvalds 26dcce0fab Merge branch 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
  NR_CPUS: Replace NR_CPUS in speedstep-centrino.c
  cpumask: Provide a generic set of CPUMASK_ALLOC macros, FIXUP
  NR_CPUS: Replace NR_CPUS in cpufreq userspace routines
  NR_CPUS: Replace per_cpu(..., smp_processor_id()) with __get_cpu_var
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genapic_flat_64.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genx2apic_uv_x.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/proc.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c
  cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c, fix
  cpumask: Use optimized CPUMASK_ALLOC macros in the centrino_target
  cpumask: Provide a generic set of CPUMASK_ALLOC macros
  cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c
  cpumask: Optimize cpumask_of_cpu in kernel/time/tick-common.c
  cpumask: Optimize cpumask_of_cpu in drivers/misc/sgi-xp/xpc_main.c
  cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/ldt.c
  cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/io_apic_64.c
  cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr
  Revert "cpumask: introduce new APIs"
  cpumask: make for_each_cpu_mask a bit smaller
  net: Pass reference to cpumask variable in net/sunrpc/svc.c
  ...

Fix up trivial conflicts in drivers/cpufreq/cpufreq.c manually
2008-07-23 18:37:44 -07:00
Linus Torvalds d7b6de14a0 Merge branch 'core/softlockup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core/softlockup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  softlockup: fix invalid proc_handler for softlockup_panic
  softlockup: fix watchdog task wakeup frequency
  softlockup: fix watchdog task wakeup frequency
  softlockup: show irqtrace
  softlockup: print a module list on being stuck
  softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression
  softlockup: fix false positives on nohz if CPU is 100% idle for more than 60 seconds
  softlockup: fix softlockup_thresh fix
  softlockup: fix softlockup_thresh unaligned access and disable detection at runtime
  softlockup: allow panic on lockup
2008-07-23 18:34:13 -07:00
Andi Kleen 4a0b2b4dbe sysdev: Pass the attribute to the low level sysdev show/store function
This allow to dynamically generate attributes and share show/store
functions between attributes. Right now most attributes are generated
by special macros and lots of duplicated code. With the attribute
passed it's instead possible to attach some data to the attribute
and then use that in shared low level functions to do different things.

I need this for the dynamically generated bank attributes in the x86
machine check code, but it'll allow some further cleanups.

I converted all users in tree to the new show/store prototype. It's a single
huge patch to avoid unbisectable sections.

Runtime tested: x86-32, x86-64
Compiled only: ia64, powerpc
Not compile tested/only grep converted: sh, arm, avr32

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:55:02 -07:00
Mike Travis c18a41fbbc cpumask: Optimize cpumask_of_cpu in kernel/time/tick-common.c
* Optimize various places where a pointer to the cpumask_of_cpu value
    will result in reducing stack pressure.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 22:02:59 +02:00
Ingo Molnar 9b610fda0d Merge branch 'linus' into timers/nohz 2008-07-18 19:53:16 +02:00
Thomas Gleixner b8f8c3cf0a nohz: prevent tick stop outside of the idle loop
Jack Ren and Eric Miao tracked down the following long standing
problem in the NOHZ code:

	scheduler switch to idle task
	enable interrupts

Window starts here

	----> interrupt happens (does not set NEED_RESCHED)
	      	irq_exit() stops the tick

	----> interrupt happens (does set NEED_RESCHED)

	return from schedule()
	
	cpu_idle(): preempt_disable();

Window ends here

The interrupts can happen at any point inside the race window. The
first interrupt stops the tick, the second one causes the scheduler to
rerun and switch away from idle again and we end up with the tick
disabled.

The fact that it needs two interrupts where the first one does not set
NEED_RESCHED and the second one does made the bug obscure and extremly
hard to reproduce and analyse. Kudos to Jack and Eric.

Solution: Limit the NOHZ functionality to the idle loop to make sure
that we can not run into such a situation ever again.

cpu_idle()
{
	preempt_disable();

	while(1) {
		 tick_nohz_stop_sched_tick(1); <- tell NOHZ code that we
		 			          are in the idle loop

		 while (!need_resched())
		       halt();

		 tick_nohz_restart_sched_tick(); <- disables NOHZ mode
		 preempt_enable_no_resched();
		 schedule();
		 preempt_disable();
	}
}

In hindsight we should have done this forever, but ... 

/me grabs a large brown paperbag.

Debugged-by: Jack Ren <jack.ren@marvell.com>, 
Debugged-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-18 18:10:28 +02:00
Ingo Molnar 82638844d9 Merge branch 'linus' into cpus4096
Conflicts:

	arch/x86/xen/smp.c
	kernel/sched_rt.c
	net/iucv/iucv.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 00:29:07 +02:00
Ingo Molnar 1e09481365 Merge branch 'linus' into core/softlockup
Conflicts:

	kernel/softlockup.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15 23:12:58 +02:00
Ingo Molnar 1a781a777b Merge branch 'generic-ipi' into generic-ipi-for-linus
Conflicts:

	arch/powerpc/Kconfig
	arch/s390/kernel/time.c
	arch/x86/kernel/apic_32.c
	arch/x86/kernel/cpu/perfctr-watchdog.c
	arch/x86/kernel/i8259_64.c
	arch/x86/kernel/ldt.c
	arch/x86/kernel/nmi_64.c
	arch/x86/kernel/smpboot.c
	arch/x86/xen/smp.c
	include/asm-x86/hw_irq_32.h
	include/asm-x86/hw_irq_64.h
	include/asm-x86/mach-default/irq_vectors.h
	include/asm-x86/mach-voyager/irq_vectors.h
	include/asm-x86/smp.h
	kernel/Makefile

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15 21:55:59 +02:00
Linus Torvalds da6e88f496 Merge branch 'timers/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: add PCI ID for 6300ESB force hpet
  x86: add another PCI ID for ICH6 force-hpet
  kernel-paramaters: document pmtmr= command line option
  acpi_pm clccksource: fix printk format warning
  nohz: don't stop idle tick if softirqs are pending.
  pmtmr: allow command line override of ioport
  nohz: reduce jiffies polling overhead
  hrtimer: Remove unused variables in ktime_divns()
  hrtimer: remove warning in hres_timers_resume
  posix-timers: print RT watchdog message
2008-07-15 10:39:57 -07:00
Linus Torvalds 17489c058e Merge branch 'sched/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (76 commits)
  sched_clock: and multiplier for TSC to gtod drift
  sched_clock: record TSC after gtod
  sched_clock: only update deltas with local reads.
  sched_clock: fix calculation of other CPU
  sched_clock: stop maximum check on NO HZ
  sched_clock: widen the max and min time
  sched_clock: record from last tick
  sched: fix accounting in task delay accounting & migration
  sched: add avg-overlap support to RT tasks
  sched: terminate newidle balancing once at least one task has moved over
  sched: fix warning
  sched: build fix
  sched: sched_clock_cpu() based cpu_clock(), lockdep fix
  sched: export cpu_clock
  sched: make sched_{rt,fair}.c ifdefs more readable
  sched: bias effective_load() error towards failing wake_affine().
  sched: incremental effective_load()
  sched: correct wakeup weight calculations
  sched: fix mult overflow
  sched: update shares on wakeup
  ...
2008-07-14 13:54:49 -07:00
Steven Rostedt af52a90a14 sched_clock: stop maximum check on NO HZ
Working with ftrace I would get large jumps of 11 millisecs or more with
the clock tracer. This killed the latencing timings of ftrace and also
caused the irqoff self tests to fail.

What was happening is with NO_HZ the idle would stop the jiffy counter and
before the jiffy counter was updated the sched_clock would have a bad
delta jiffies to compare with the gtod with the maximum.

The jiffies would stop and the last sched_tick would record the last gtod.
On wakeup, the sched clock update would compare the gtod + delta jiffies
(which would be zero) and compare it to the TSC. The TSC would have
correctly (with a stable TSC) moved forward several jiffies. But because the
jiffies has not been updated yet the clock would be prevented from moving
forward because it would appear that the TSC jumped too far ahead.

The clock would then virtually stop, until the jiffies are updated. Then
the next sched clock update would see that the clock was very much behind
since the delta jiffies is now correct. This would then jump the clock
forward by several jiffies.

This caused ftrace to report several milliseconds of interrupts off
latency at every resume from NO_HZ idle.

This patch adds hooks into the nohz code to disable the checking of the
maximum clock update when nohz is in effect. It resumes the max check
when nohz has updated the jiffies again.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11 15:53:26 +02:00
Heiko Carstens 857f3fd7a4 nohz: don't stop idle tick if softirqs are pending.
In case a cpu goes idle but softirqs are pending only an error message is
printed to the console. It may take a very long time until the pending
softirqs will finally be executed. Worst case would be a hanging system.

With this patch the timer tick just continues and the softirqs will be
executed after the next interrupt. Still a delay but better than a
hanging system.

Currently we have at least two device drivers on s390 which under certain
circumstances schedule a tasklet from process context. This is a reason
why we can end up with pending softirqs when going idle. Fixing these
drivers seems to be non-trivial.
However there is no question that the drivers should be fixed.
This patch shouldn't be considered as a bug fix. It just is intended to
keep a system running even if device drivers are buggy.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jan Glauber <jan.glauber@de.ibm.com>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11 11:17:04 +02:00
Thomas Gleixner aa276e1caf x86, clockevents: add C1E aware idle function
C1E on AMD machines is like C3 but without control from the OS. Up to
now we disabled the local apic timer for those machines as it stops
when the CPU goes into C1E. This excludes those machines from high
resolution timers / dynamic ticks, which hurts especially X2 based
laptops.

The current boot time C1E detection has another, more serious flaw
as well: some BIOSes do not enable C1E until the ACPI processor module
is loaded. This causes systems to stop working after that point.

To work nicely with C1E enabled machines we use a separate idle
function, which checks on idle entry whether C1E was enabled in the
Interrupt Pending Message MSR. This allows us to do timer broadcasting
for C1E and covers the late enablement of C1E as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 07:47:18 +02:00
Jens Axboe 8691e5a8f6 smp_call_function: get rid of the unused nonatomic/retry argument
It's never used and the comments refer to nonatomic and retry
interchangably. So get rid of it.

Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-06-26 11:24:35 +02:00
Ingo Molnar 7a14ce1d8c nohz: reduce jiffies polling overhead
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-30 14:16:10 +02:00
Ingo Molnar 02ff375590 softlockup: fix false positives on nohz if CPU is 100% idle for more than 60 seconds
Fix (probably theoretical only) rq->clock update bug:
in tick_nohz_update_jiffies() [which is called on all irq
entry on all cpus where the irq entry hits an idle cpu] we
call touch_softlockup_watchdog() before we update jiffies.
That works fine most of the time when idle timeouts are within
60 seconds. But when an idle timeout is beyond 60 seconds,
jiffies is updated with a jump of more than 60 seconds,
which causes a jump in cpu-clock of more than 60 seconds,
triggering a false positive.

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-30 14:15:02 +02:00
Mike Travis cad0e458d1 clocksource/events: use performance variant for_each_cpu_mask_nr
Change references from for_each_cpu_mask to for_each_cpu_mask_nr
where appropriate

Reviewed-by: Paul Jackson <pj@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 18:39:06 +02:00
Heiko Carstens 4f95f81a48 clocksource: allow read access to available/current_clocksource
There is no harm, when users can read the info and we ask often enough
during debugging for this kind of information.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-03 18:11:48 +02:00
Heiko Carstens 4359a023a8 clocksource: Fix permissions for available_clocksource
File permissions for
/sys/devices/system/clocksource/clocksource0/available_clocksource
are 600 which allows write access. But this is in fact a read only
file. So change permissions to 400.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-03 18:11:48 +02:00
Roman Zippel 7dffa3c673 ntp: handle leap second via timer
Remove the leap second handling from second_overflow(), which doesn't have to
check for it every second anymore.  With CONFIG_NO_HZ this also makes sure the
leap second is handled close to the full second.  Additionally this makes it
possible to abort a leap second properly by resetting the STA_INS/STA_DEL
status bits.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:03:59 -07:00
Roman Zippel 8383c42399 ntp: remove current_tick_length()
current_tick_length used to do a little more, but now it just returns
tick_length, which we can also access directly at the few places, where it's
needed.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:03:59 -07:00
Roman Zippel 7fc5c78409 ntp: rename TICK_LENGTH_SHIFT to NTP_SCALE_SHIFT
As TICK_LENGTH_SHIFT is used for more than just the tick length, the name
isn't quite approriate anymore, so this renames it to NTP_SCALE_SHIFT.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:03:59 -07:00
Roman Zippel 153b5d054a ntp: support for TAI
This adds support for setting the TAI value (International Atomic Time).  The
value is reported back to userspace via timex (as we don't have a
ntp_gettime() syscall).

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:03:59 -07:00
Roman Zippel 9f14f669d1 ntp: increase time_offset resolution
time_offset is already a 64bit value but its resolution barely used, so this
makes better use of it by replacing SHIFT_UPDATE with TICK_LENGTH_SHIFT.

Side note: the SHIFT_HZ in SHIFT_UPDATE was incorrect for CONFIG_NO_HZ and the
primary reason for changing time_offset to 64bit to avoid the overflow.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:03:58 -07:00
Roman Zippel 074b3b8794 ntp: increase time_freq resolution
This changes time_freq to a 64bit value and makes it static (the only outside
user had no real need to modify it).  Intermediate values were already 64bit,
so the change isn't that big, but it saves a little in shifts by replacing
SHIFT_NSEC with TICK_LENGTH_SHIFT.  PPM_SCALE is then used to convert between
user space and kernel space representation.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:03:58 -07:00
Roman Zippel eea83d896e ntp: NTP4 user space bits update
This adds a few more things from the ntp nanokernel related to user space.
It's now possible to select the resolution used of some values via STA_NANO
and the kernel reports in which mode it works (pll/fll).

If some values for adjtimex() are outside the acceptable range, they are now
simply normalized instead of letting the syscall fail.  I removed
MOD_CLKA/MOD_CLKB as the mapping didn't really makes any sense, the kernel
doesn't support setting the clock.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:03:58 -07:00
Roman Zippel ee9851b218 ntp: cleanup ntp.c
This is mostly a style cleanup of ntp.c and extracts part of do_adjtimex as
ntp_update_offset().  Otherwise the functionality is still the same as before.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:03:58 -07:00
Roman Zippel f8bd2258e2 remove div_long_long_rem
x86 is the only arch right now, which provides an optimized for
div_long_long_rem and it has the downside that one has to be very careful that
the divide doesn't overflow.

The API is a little akward, as the arguments for the unsigned divide are
signed.  The signed version also doesn't handle a negative divisor and
produces worse code on 64bit archs.

There is little incentive to keep this API alive, so this converts the few
users to the new API.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:03:58 -07:00
Roman Zippel 71abb3af62 convert a few do_div users
This converts a few users of do_div to div_[su]64 and this demonstrates nicely
how it can reduce some expressions to one-liners.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:03:58 -07:00
Denis V. Lunev c33fff0afb kernel: use non-racy method for proc entries creation
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:22 -07:00
Ingo Molnar 126e01bf92 softlockup: fix NOHZ wakeup
David Miller reported:

|--------------->
the following commit:

| commit 27ec440779
| Author: Ingo Molnar <mingo@elte.hu>
| Date:   Thu Feb 28 21:00:21 2008 +0100
|
|     sched: make cpu_clock() globally synchronous
|
|     Alexey Zaytsev reported (and bisected) that the introduction of
|     cpu_clock() in printk made the timestamps jump back and forth.
|
|     Make cpu_clock() more reliable while still keeping it fast when it's
|     called frequently.
|
|     Signed-off-by: Ingo Molnar <mingo@elte.hu>

causes watchdog triggers when a cpu exits NOHZ state when it has been
there for >= the soft lockup threshold, for example here are some
messages from a 128 cpu Niagara2 box:

[  168.106406] BUG: soft lockup - CPU#11 stuck for 128s! [dd:3239]
[  168.989592] BUG: soft lockup - CPU#21 stuck for 86s! [swapper:0]
[  168.999587] BUG: soft lockup - CPU#29 stuck for 91s! [make:4511]
[  168.999615] BUG: soft lockup - CPU#2 stuck for 85s! [swapper:0]
[  169.020514] BUG: soft lockup - CPU#37 stuck for 91s! [swapper:0]
[  169.020514] BUG: soft lockup - CPU#45 stuck for 91s! [sh:4515]
[  169.020515] BUG: soft lockup - CPU#69 stuck for 92s! [swapper:0]
[  169.020515] BUG: soft lockup - CPU#77 stuck for 92s! [swapper:0]
[  169.020515] BUG: soft lockup - CPU#61 stuck for 92s! [swapper:0]
[  169.112554] BUG: soft lockup - CPU#85 stuck for 92s! [swapper:0]
[  169.112554] BUG: soft lockup - CPU#101 stuck for 92s! [swapper:0]
[  169.112554] BUG: soft lockup - CPU#109 stuck for 92s! [swapper:0]
[  169.112554] BUG: soft lockup - CPU#117 stuck for 92s! [swapper:0]
[  169.171483] BUG: soft lockup - CPU#40 stuck for 80s! [dd:3239]
[  169.331483] BUG: soft lockup - CPU#13 stuck for 86s! [swapper:0]
[  169.351500] BUG: soft lockup - CPU#43 stuck for 101s! [dd:3239]
[  169.531482] BUG: soft lockup - CPU#9 stuck for 129s! [mkdir:4565]
[  169.595754] BUG: soft lockup - CPU#20 stuck for 93s! [swapper:0]
[  169.626787] BUG: soft lockup - CPU#52 stuck for 93s! [swapper:0]
[  169.626787] BUG: soft lockup - CPU#84 stuck for 92s! [swapper:0]
[  169.636812] BUG: soft lockup - CPU#116 stuck for 94s! [swapper:0]

It's simple enough to trigger this by doing a 10 minute sleep after a
fresh bootup then starting a parallel kernel build.

I suspect this might be reintroducing a problem we've had and fixed
before, see the thread:

http://marc.info/?l=linux-kernel&m=119546414004065&w=2
<---------------|

touch the softlockup watchdog when exiting NOHZ state - we are
obviously not locked up.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-25 00:25:08 +02:00
Linus Torvalds 5dfeaef895 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
  hrtimer: optimize the softirq time optimization
  hrtimer: reduce calls to hrtimer_get_softirq_time()
  clockevents: fix typo in tick-broadcast.c
  jiffies: add time_is_after_jiffies and others which compare with jiffies
2008-04-21 15:43:43 -07:00
Linus Torvalds ec965350bb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel: (62 commits)
  sched: build fix
  sched: better rt-group documentation
  sched: features fix
  sched: /debug/sched_features
  sched: add SCHED_FEAT_DEADLINE
  sched: debug: show a weight tree
  sched: fair: weight calculations
  sched: fair-group: de-couple load-balancing from the rb-trees
  sched: fair-group scheduling vs latency
  sched: rt-group: optimize dequeue_rt_stack
  sched: debug: add some debug code to handle the full hierarchy
  sched: fair-group: SMP-nice for group scheduling
  sched, cpuset: customize sched domains, core
  sched, cpuset: customize sched domains, docs
  sched: prepatory code movement
  sched: rt: multi level group constraints
  sched: task_group hierarchy
  sched: fix the task_group hierarchy for UID grouping
  sched: allow the group scheduler to have multiple levels
  sched: mix tasks and groups
  ...
2008-04-21 15:40:24 -07:00
Glauber Costa 833df317f9 clockevents: fix typo in tick-broadcast.c
braodcast -> broadcast

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-21 07:59:51 +02:00
Peter Zijlstra d0b27fa778 sched: rt-group: synchonised bandwidth period
Various SMP balancing algorithms require that the bandwidth period
run in sync.

Possible improvements are moving the rt_bandwidth thing into root_domain
and keeping a span per rt_bandwidth which marks throttled cpus.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:57 +02:00
Thomas Gleixner d8bb6f4c16 x86: tsc prevent time going backwards
We already catch most of the TSC problems by sanity checks, but there
is a subtle bug which has been in the code forever. This can cause
time jumps in the range of hours.

This was reported in:
     http://lkml.org/lkml/2007/8/23/96
and
     http://lkml.org/lkml/2008/3/31/23

I was able to reproduce the problem with a gettimeofday loop test on a
dual core and a quad core machine which both have sychronized
TSCs. The TSCs seems not to be perfectly in sync though, but the
kernel is not able to detect the slight delta in the sync check. Still
there exists an extremly small window where this delta can be observed
with a real big time jump. So far I was only able to reproduce this
with the vsyscall gettimeofday implementation, but in theory this
might be observable with the syscall based version as well.

CPU 0 updates the clock source variables under xtime/vyscall lock and
CPU1, where the TSC is slighty behind CPU0, is reading the time right
after the seqlock was unlocked.

The clocksource reference data was updated with the TSC from CPU0 and
the value which is read from TSC on CPU1 is less than the reference
data. This results in a huge delta value due to the unsigned
subtraction of the TSC value and the reference value. This algorithm
can not be changed due to the support of wrapping clock sources like
pm timer.

The huge delta is converted to nanoseconds and added to xtime, which
is then observable by the caller. The next gettimeofday call on CPU1
will show the correct time again as now the TSC has advanced above the
reference value.

To prevent this TSC specific wreckage we need to compare the TSC value
against the reference value and return the latter when it is larger
than the actual TSC value.

I pondered to mark the TSC unstable when the readout is smaller than
the reference value, but this would render an otherwise good and fast
clocksource unusable without a real good reason.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:19:55 +02:00
Linus Torvalds 73e3e6481f Merge git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
  clocksource: make clocksource watchdog cycle through online CPUs
  Documentation: move timer related documentation to a single place
  clockevents: optimise tick_nohz_stop_sched_tick() a bit
  locking: remove unused double_spin_lock()
  hrtimers: simplify lockdep handling
  timers: simplify lockdep handling
  posix-timers: fix shadowed variables
  timer_list: add annotations to workqueue.c
  hrtimer: use nanosleep specific restart_block fields
  hrtimer: add nanosleep specific restart_block member
2008-04-18 08:37:41 -07:00
Linus Torvalds 9732b61123 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-kgdb
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-kgdb:
  kgdb: always use icache flush for sw breakpoints
  kgdb: fix SMP NMI kgdb_handle_exception exit race
  kgdb: documentation fixes
  kgdb: allow static kgdbts boot configuration
  kgdb: add documentation
  kgdb: Kconfig fix
  kgdb: add kgdb internal test suite
  kgdb: fix several kgdb regressions
  kgdb: kgdboc pl011 I/O module
  kgdb: fix optional arch functions and probe_kernel_*
  kgdb: add x86 HW breakpoints
  kgdb: print breakpoint removed on exception
  kgdb: clocksource watchdog
  kgdb: fix NMI hangs
  kgdb: fix kgdboc dynamic module configuration
  kgdb: document parameters
  x86: kgdb support
  consoles: polling support, kgdboc
  kgdb: core
  uaccess: add probe_kernel_write()
2008-04-18 08:37:01 -07:00
Jason Wessel 7c3078b637 kgdb: clocksource watchdog
In order to not trip the clocksource watchdog, kgdb must touch the
clocksource watchdog on the return to normal system run state.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 20:05:38 +02:00
Andi Kleen 6993fc5bbc clocksource: make clocksource watchdog cycle through online CPUs
This way it checks if the clocks are synchronized between CPUs too.
This might be able to detect slowly drifting TSCs which only
go wrong over longer time.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 12:22:31 +02:00
Karsten Wiese 903b8a8d48 clockevents: optimise tick_nohz_stop_sched_tick() a bit
Call
	ts = &per_cpu(tick_cpu_sched, cpu);
and
	cpu = smp_processor_id();
once instead of twice.

No functional change done, as changed code runs with local irq off.
Reduces source lines and text size (20bytes on x86_64).

[ akpm@linux-foundation.org: Build fix ]

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 12:22:31 +02:00
Russell King d7b906897e [S390] genirq/clockevents: move irq affinity prototypes/inlines to interrupt.h
> Generic code is not supposed to include irq.h. Replace this include
> by linux/hardirq.h instead and add/replace an include of linux/irq.h
> in asm header files where necessary.
> This change should only matter for architectures that make use of
> GENERIC_CLOCKEVENTS.
> Architectures in question are mips, x86, arm, sh, powerpc, uml and sparc64.
>
> I did some cross compile tests for mips, x86_64, arm, powerpc and sparc64.
> This patch fixes also build breakages caused by the include replacement in
> tick-common.h.

I generally dislike adding optional linux/* includes in asm/* includes -
I'm nervous about this causing include loops.

However, there's a separate point to be discussed here.

That is, what interfaces are expected of every architecture in the kernel.
If generic code wants to be able to set the affinity of interrupts, then
that needs to become part of the interfaces listed in linux/interrupt.h
rather than linux/irq.h.

So what I suggest is this approach instead (against Linus' tree of a
couple of days ago) - we move irq_set_affinity() and irq_can_set_affinity()
to linux/interrupt.h, change the linux/irq.h includes to linux/interrupt.h
and include asm/irq_regs.h where needed (asm/irq_regs.h is supposed to be
rarely used include since not much touches the stacked parent context
registers.)

Build tested on ARM PXA family kernels and ARM's Realview platform
kernels which both use genirq.

[ tglx@linutronix.de: add GENERIC_HARDIRQ dependencies ]

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17 07:47:05 +02:00
Thomas Gleixner 898a19de15 clocksource: revert: use init_timer_deferrable for clocksource_watchdog
Revert

commit 1077f5a917
Author: Parag Warudkar <parag.warudkar@gmail.com>
Date:   Wed Jan 30 13:30:01 2008 +0100

    clocksource.c: use init_timer_deferrable for clocksource_watchdog
    
    clocksource_watchdog can use a deferrable timer - reduces wakeups from
    idle per second.

The watchdog timer needs to run with the specified interval. Otherwise
it will miss the possible wrap of the watchdog clocksource.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org
2008-03-25 20:13:25 +01:00
Linus Torvalds 92896bd9fd Don't 'printk()' while holding xtime lock for writing
The printk() can deadlock because it can wake up klogd(), and
task enqueueing will try to read the time in order to set a hrtimer.

Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Debugged-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-24 11:07:15 -07:00
Andrew Morton 3150e63df4 revert "clocksource: make clocksource watchdog cycle through online CPUs"
Revert commit 1ada5cba6a ("clocksource:
make clocksource watchdog cycle through online CPUs") due to the
regression reported by Gabriel C at

	http://lkml.org/lkml/2008/2/24/281

(short vesion: it makes TSC be marked as always unstable on his
machine).

Cc: Andi Kleen <ak@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Robert Hancock <hancockr@shaw.ca>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-19 18:53:37 -07:00
Roman Zippel 10a398d04c time: remove obsolete CLOCK_TICK_ADJUST
The first version of the ntp_interval/tick_length inconsistent usage patch was
recently merged as bbe4d18ac2

http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=bbe4d18ac2e058c56adb0cd71f49d9ed3216a405

While the fix did greatly improve the situation, it was correctly pointed out
by Roman that it does have a small bug: If the users change clocksources after
the system has been running and NTP has made corrections, the correctoins made
against the old clocksource will be applied against the new clocksource,
causing error.

The second attempt, which corrects the issue in the NTP_INTERVAL_LENGTH
definition has also made it up-stream as commit
e13a2e61dd

http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e13a2e61dd5152f5499d2003470acf9c838eab84

Roman has correctly pointed out that CLOCK_TICK_ADJUST is calculated
based on the PIT's frequency, and isn't really relevant to non-PIT
driven clocksources (that is, clocksources other then jiffies and pit).

This patch reverts both of those changes, and simply removes
CLOCK_TICK_ADJUST.

This does remove the granularity error correction for users of PIT and Jiffies
clocksource users, but the granularity error but for the majority of users, it
should be within the 500ppm range NTP can accommodate for.

For systems that have granularity errors greater then 500ppm, the
"ntp_tick_adj=" boot option can be used to compensate.

[johnstul@us.ibm.com: provided changelog]
[mattilinnanvuori@yahoo.com: maek ntp_tick_adj static]
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Acked-by: john stultz <johnstul@us.ibm.com>
Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: mingo@elte.hu
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-09 08:42:57 +01:00
Karsten Wiese a79017660e time: don't touch an offlined CPU's ts->tick_stopped in tick_cancel_sched_timer()
Silences WARN_ONs in rcu_enter_nohz() and rcu_exit_nohz(), which appeared
before caused by (repeated) calls to:
        $ echo 0 > /sys/devices/system/cpu/cpu1/online
        $ echo 1 > /sys/devices/system/cpu/cpu1/online

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: johnstul@us.ibm.com
Cc: Rafael Wysocki <rjw@sisk.pl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-09 08:42:57 +01:00
David Howells e48af19f56 ntp: use unsigned input for do_div()
The kernel NTP code shouldn't hand 64-bit *signed* values to do_div().  Make it
instead hand 64-bit unsigned values.  This gets rid of a couple of warnings.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-09 08:42:57 +01:00
Steven Rostedt 2232c2d8e0 rcu: add support for dynamic ticks and preempt rcu
The PREEMPT-RCU can get stuck if a CPU goes idle and NO_HZ is set. The
idle CPU will not progress the RCU through its grace period and a
synchronize_rcu my get stuck. Without this patch I have a box that will
not boot when PREEMPT_RCU and NO_HZ are set. That same box boots fine
with this patch.

This patch comes from the -rt kernel where it has been tested for
several months.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-29 18:46:50 +01:00
Pavel Machek db4315d6f5 timer_list: print relative expiry time signed
Relative expiry time can get negative, so it should be signed.

Signed-off-by: Pavel Machek <Pavel@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-17 17:29:38 +01:00
john stultz e13a2e61dd ntp: correct inconsistent interval/tick_length usage
clocksource initialization and error accumulation.  This corrects a 280ppm
drift seen on some systems using acpi_pm, and affects other clocksources as
well (likely to a lesser degree).

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-10 10:48:03 +01:00
Li Zefan 3eb056764d time: fix typo in comments
Fix typo in comments.

BTW: I have to fix coding style in arch/ia64/kernel/time.c also, otherwise
checkpatch.pl will be complaining.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:29 -08:00
Li Zefan cf4fc6cb76 timekeeping: rename timekeeping_is_continuous to timekeeping_valid_for_hres
Function timekeeping_is_continuous() no longer checks flag
CLOCK_IS_CONTINUOUS, and it checks CLOCK_SOURCE_VALID_FOR_HRES now.  So rename
the function accordingly.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:29 -08:00
Li Zefan 0b858e6ff9 clockevent: simplify list operations
list_for_each_safe() suffices here.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:29 -08:00
Li Zefan 818c357802 clocksource: remove redundant code
Flag CLOCK_SOURCE_WATCHDOG is cleared twice.  Note clocksource_change_rating()
won't do anyting with the cs flag.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:29 -08:00
Miao Xie 5e2cb1018a time: fix sysfs_show_{available,current}_clocksources() buffer overflow problem
I found that there is a buffer overflow problem in the following code.

Version:	2.6.24-rc2,
File:		kernel/time/clocksource.c:417-432
--------------------------------------------------------------------
static ssize_t
sysfs_show_available_clocksources(struct sys_device *dev, char *buf)
{
	struct clocksource *src;
	char *curr = buf;

	spin_lock_irq(&clocksource_lock);
	list_for_each_entry(src, &clocksource_list, list) {
		curr += sprintf(curr, "%s ", src->name);
	}
	spin_unlock_irq(&clocksource_lock);

	curr += sprintf(curr, "\n");

	return curr - buf;
}
-----------------------------------------------------------------------

sysfs_show_current_clocksources() also has the same problem though in practice
the size of current clocksource's name won't exceed PAGE_SIZE.

I fix the bug by using snprintf according to the specification of the kernel
(Version:2.6.24-rc2,File:Documentation/filesystems/sysfs.txt)

Fix sysfs_show_available_clocksources() and sysfs_show_current_clocksources()
buffer overflow problem with snprintf().

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:03 -08:00
Thomas Gleixner 5df7fa1c62 tick-sched: add more debug information
To allow better diagnosis of tick-sched related, especially NOHZ
related problems, we need to know when the last wakeup via an irq
happened and when the CPU left the idle state.

Add two fields (idle_waketime, idle_exittime) to the tick_sched
structure and add them to the timer_list output.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01 17:45:14 +01:00