Commit Graph

29 Commits

Author SHA1 Message Date
Loic Poulain 31eff26703 Bluetooth: hci_intel: Remove LPM enabling from setup procedure
LPM can be enabled via a DDC write command at specific DDC ID.
As any other DDC value, this is up to the DDC config file to
include (or not) the low power mode configuration.

Signed-off-by: Loic Poulain <loic.poulain@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-11 21:57:50 +02:00
Loic Poulain 32b9ccbc35 Bluetooth: hci_intel: Fix null gpio desc pointer dereference
gpiod_get_optional can return either ERR_PTR or NULL pointer.
NULL case is not tested and then dereferenced later in desc_to_gpio.
Fix this by using non optional version which returns ERR_PTR in any
error case (this is not an optional gpio).
Use the same non optional version for the host-wake gpio.

Fixes: 765ea3abd1 ("Bluetooth: hci_intel: Retrieve host-wake IRQ")
Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-05-02 19:29:31 +02:00
Anton Protopopov 2be1149ed4 Bluetooth: hci_intel: Fix a wrong comparison
A return value of the intel_wait_booting() function compared with
a constant ETIMEDOUT instead of -ETIMEDOUT.

Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23 20:29:36 +01:00
Loic Poulain 6c483de1b3 Bluetooth: btintel: Create common Intel Version Read function
The Intel Version Read command is used to retrieve information
about hardware and firmware version/revision of Intel Bluetooth
controllers. This is an Intel generic command used in USB and
UART drivers.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:51 +01:00
Loic Poulain a0c3824515 Bluetooth: hci_intel: Use shorter timeout for HCI commands
Use the standard HCI_CMD_TIMEOUT(1s) for HCI command instead of
HCI_INIT_TIMEOUT(10s) which is not justified in these cases.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:50 +01:00
Marcel Holtmann 618e8bc228 Bluetooth: Use new hci_skb_pkt_* wrappers for drivers
The new hci_skb_pkt_* wrappers are mainly intented for drivers to
require less knowledge about bt_cb(sbk) handling. So after converting
the core packet handling, convert all drivers.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-19 17:50:27 +01:00
Marcel Holtmann aee61f7aa8 Bluetooth: hci_uart: Provide initial manufacturer information
Provide an early indication about the manufacturer information so that
it can be forwarded into monitor channel.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 07:20:44 +03:00
Marcel Holtmann 6d2e50d240 Bluetooth: btintel: Add support for enabling tracing functionality
For Intel controllers with firmware that allows tracing of baseband
functionality this allows enabling it via set_diag driver callback.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 00:49:21 +02:00
Jarkko Nikula 23270e160d Bluetooth: hci_intel: Cleanup the device probe code
There is some unneeded code in "hci_intel" probing. First
acpi_match_device() call is needless as driver/platform/acpi core code has
already done the matching before calling the probe and the driver does not
use the returned pointer to matching _HID other than checking is it NULL.

Then tree wide grep for "hci_intel" doesn't reveal that there is any code
registering this platform device so it looks this device is always backed
with ACPI companion so also ACPI_HANDLE() test can be removed.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-01 08:55:42 +02:00
Loic Poulain f755247379 Bluetooth: hci_intel: Enable IRQ wake capability
We need to explicitly enable the IRQ wakeup mode to let the controller
wake the system from sleep states (like suspend-to-ram).
PM suspend/resume callbacks now call the generic intel device PM
functions after enabling/disabling IRQ wake.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17 13:20:06 +02:00
Loic Poulain 30e945fb28 Bluetooth: hci_intel: Give priority to LPM packets
Change the way to insert LPM packets into the txq.
Use skb_queue_head instead of skb_queue_tail to always prioritise LPM
packets over potential tx queue content.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17 13:20:06 +02:00
Loic Poulain 1cfbabdd11 Bluetooth: hci_intel: Add Device configuration
Apply DDC parameters once controller is in operational mode.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17 13:20:05 +02:00
Loic Poulain a9cb0fe489 Bluetooth: hci_intel: Fix warnings due to unused lpm functions
intel_lpm_suspend/resume are only used in case of CONFIG_PM.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17 13:20:05 +02:00
Loic Poulain 1b1975749f Bluetooth: hci_intel: Show error in case of invalid LPM packet size
Don't hide this packet size error.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17 13:20:02 +02:00
Loic Poulain 74cdad37cd Bluetooth: hci_intel: Add runtime PM support
Implement runtime PM suspend/resume callbacks.
If LPM supported, controller is put into supsend after a delay of
inactivity (1s). Inactivity is based on LPM idle notification and
host TX traffic.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17 13:20:02 +02:00
Loic Poulain aa6802df09 Bluetooth: hci_intel: Add PM support
Add PM suspend/resume callbacks which call lpm_suspend/resume.
Add LPM ack in threaded IRQ handler to notify the controller that
resume is complete.
Protect hci_uart against concurrent removing during suspend/resume.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17 13:20:01 +02:00
Loic Poulain 894365468e Bluetooth: hci_intel: Implement LPM suspend/resume
Add LPM PM suspend/resume/host_wake LPM functions.
A LPM transaction is composed with a LPM request and ack/response.
Host can send a LPM suspend/resume request to the controller which
should respond with a LPM ack.
If resume is requested by the controller (irq), host has to send a LPM
ack once resumed.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17 13:20:01 +02:00
Loic Poulain 67c8bde04d Bluetooth: hci_intel: Replace spinlock with mutex
Replace the device_intel list spinlock with a mutex.
devm_request_threaded_irq is not atomic and upcomming PM support should
be simpler.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17 13:20:01 +02:00
Loic Poulain f44e78a5fc Bluetooth: hci_intel: Use bt_dev logging helpers
Replace BT_ logging calls by the new bt_dev ones.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17 13:20:01 +02:00
Loic Poulain b98469f4be Bluetooth: hci_intel: Introduce LPM support
Enable controller Low-Power-Mode if we have a pdev to manage host
wake-up. Once LPM is enabled, controller notifies its TX status via
a vendor specific packet (tx_idle/tx_active).
tx_active means that there is more data upcoming from controller.
tx_idle means that controller can be put in suspended state.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17 13:20:00 +02:00
Loic Poulain 765ea3abd1 Bluetooth: hci_intel: Retrieve host-wake IRQ
An IRQ can be retrieved from the pdev resources. This irq will be used
in case of LPM suspend mode to wake-up the host and resume the link.
This resource can be declared as a GPIO-Interrupt which requires to be
converted into IRQ.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17 13:20:00 +02:00
Loic Poulain 1ab1f239bf Bluetooth: hci_intel: Add support for platform driver
A platform device can be used to provide some specific resources in
order to manage the controller. In this first patch we retrieve the
reset gpio which is used to power on/off the controller.

The main issue is to match the current tty with the correct pdev.
In case of ACPI, we can easily find the right tty/pdev pair because
they are both child of the same UART port.

If controller is powered-on from the driver, we need to wait for a
HCI boot event before being able to send any command.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28 21:00:38 +02:00
Loic Poulain ff2895592f Bluetooth: hci_intel: Add Intel baudrate configuration support
Implement the set_baudrate callback for hci_intel.
 - Controller requires a read Intel version command before updating
   its baudrate.
 - The operation consists in an async cmd since the controller does
   not respond at the same speed.
 - Wait 100ms to let the controller change its baudrate.
 - Clear RTS until we change our own UART speed

Manage speed change in the setup function, we need to restore the oper
speed once chip has booted on patched firmware.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28 21:00:37 +02:00
Marcel Holtmann 7feb99e130 Bluetooth: btintel: Create common function for Intel version info
The Intel version information is shared between USB and UART drivers
and with that move it into a generic function of the Intel module.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-23 17:10:50 +02:00
Marcel Holtmann 09df123d2d Bluetooth: btintel: Create common Intel Secure Send function
The Intel Secure Send command is used the same in USB and UART drivers
and with that move a generic version into the Intel module.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-23 17:10:50 +02:00
Marcel Holtmann 35ab8150ee Bluetooth: hci_uart: Add Intel address configuration support
The Intel specific Bluetooth module provides support for pubic address
configuration. So make sure that it is enabled for Intel UART devices.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-23 17:10:50 +02:00
Loic Poulain ca93cee5a5 Bluetooth: hci_uart: Add basic support for Intel Lightning Peak devices
The Intel Lightning Peak devices do not come with Bluetooth firmware
loaded and thus require a full download of the operational Bluetooth
firmware when the device is attached via the Bluetooth line discipline.

Lightning Peak devices start with a bootloader mode that only accepts
a very limited set of HCI commands. The supported commands are enough
to identify the hardware and select the right firmware to load.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-23 17:10:49 +02:00
Marcel Holtmann bca03c959a Bluetooth: hci_uart: Use generic Intel support for address setting
The Bluetooth address setting for Intel devices is provided by a generic
module now. Start using that module instead of relying it being included
in the driver.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07 18:48:21 +02:00
Marcel Holtmann 16e3887f9c Bluetooth: hci_uart: Add support Intel address configuration
When using vendor detection, this adds support for the Intel specific
address configuration command.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07 18:47:08 +02:00