Commit Graph

65 Commits

Author SHA1 Message Date
Andy Shevchenko 747e42a1c0 gpio: pca953x: enable driver on Intel Edison
Intel Edison board has 4 GPIO expanders PCA9555a connected to I2C bus. Add an
ID to support them.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15 09:08:02 +02:00
Vignesh R a246b8198f gpio: pca953x: Fix NBANK calculation for PCA9536
NBANK() macro assumes that ngpios is a multiple of 8(BANK_SZ) and
hence results in 0 banks for PCA9536 which has just 4 gpios. This is
wrong as PCA9356 has 1 bank with 4 gpios. This results in uninitialized
PCA953X_INVERT register. Fix this by using DIV_ROUND_UP macro in
NBANK().

Cc: stable@vger.kernel.org
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-13 09:21:28 +02:00
Andy Shevchenko c4d1cbd7cf gpio: pca953x: enfore type for i2c_smbus_write_word_data()
The commit 9b8e3ec343 ("gpio: pca953x: Use correct u16 value for register
word write") fixed regression in pca953x_write_regs(). At the same time the
solution introduced a sparse warning:

drivers/gpio/gpio-pca953x.c:168:39: warning: incorrect type in argument 3 (different base types)
drivers/gpio/gpio-pca953x.c:168:39:    expected unsigned short [unsigned] [usertype] value
drivers/gpio/gpio-pca953x.c:168:39:    got restricted __le16 [usertype] <noident>

Fix the code by enforcing the type of i2c_smbus_write_word_data() parameter.

Cc: Yong Li <sdliyong@gmail.com>
Cc: Phil Reid <preid@electromag.com.au>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-08 10:02:24 +02:00
Andy Shevchenko 8c7a92dad1 gpio: pca953x: remove redundant assignments
There are few redundant assignments of ret variable which is updated anyway.
Remove them for good.

While here, correct indentation of the constant definition and remove one empty
line.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-07 09:35:17 +02:00
Vignesh R 353661dfe1 gpio: pca953x: Add support for TI PCA9536
TI PCA9536 is 4-Bit I2C GPIO expander without interrupt support[1].
Add support for the same.

[1] TRM: http://www.ti.com/lit/ds/symlink/pca9536.pdf

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-07 09:35:15 +02:00
Linus Torvalds 1eccc6e152 This is the bulk of GPIO changes for kernel cycle v4.7:
Core infrastructural changes:
 
 - Support for natively single-ended GPIO driver stages. This
   means that if the hardware has registers to configure open
   drain or open source configuration, we use that rather than
   (as we did before) try to emulate it by switching the line
   to an input to get high impedance. This is also documented
   throughly in Documentation/gpio/driver.txt for those of you
   who did not understand one word of what I just wrote.
 
 - Start to do away with the unnecessarily complex and
   unitelligible ARCH_REQUIRE_GPIOLIB and
   ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from
   the time when the GPIO subsystem was unmaintained. Archs can
   now just select GPIOLIB and be done with it, cleanups to
   arches will trickle in for the next kernel. Some minor archs
   ACKed the changes immediately so these are included in this
   pull request.
 
 - Advancing the use of the data pointer inside the GPIO device
   for storing driver data by switching the PowerPC, Super-H
   Unicore and a few other subarches or subsystem drivers in
   ALSA SoC, Input, serial, SSB, staging etc to use it.
 
 - The initialization now reads the input/output state of the
   GPIO lines, so that each GPIO descriptor knows - if this
   callback is implemented - whether the line is input or
   output. This also reflects nicely in userspace "lsgpio".
 
 - It is now possible to name GPIO producer names, line names,
   from the device tree. (Platform data has been supported for
   a while.) I bet we will get a similar mechanism for ACPI
   one of those days. This makes is possible to get sensible
   producer names for e.g. GPIO rails in "lsgpio" in userspace.
 
 New drivers:
 
 - New driver for the Loongson1.
 
 - The XLP driver now supports Broadcom Vulcan ARM64.
 
 - The IT87 driver now supports IT8620 and IT8628.
 
 - The PCA953X driver now supports Galileo Gen2.
 
 Driver improvements:
 
 - MCP23S08 was switched to use the gpiolib irqchip helpers and
   now also suppors level-triggered interrupts.
 
 - 74x164 and RCAR now supports the .set_multiple() callback
 
 - AMDPT was converted to use generic GPIO.
 
 - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
   support the new single ended callback for open drain
   and in some cases open source.
 
 - Implement the .get_direction() callback for a few more drivers
   like PL061, Xgene.
 
 Cleanups:
 
 - Paul Gortmaker combed through the drivers and de-modularized
   those who are not really modules.
 
 - Move the GPIO poweroff DT bindings to the power subdir where
   they belong.
 
 - Rename gpio-generic.c to gpio-mmio.c, which is much more to the
   point. That's what it is handling, nothing more, nothing less.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXOuJ5AAoJEEEQszewGV1zNXsQAII5wtkP69WRJ3goYBKg1dZN
 DkuLqZyVI4hCgRhptzUW10gDLHKKOCVubfetTJHSpyG/dWDJXPCyH6FHF+pW6lMX
 y+em8kAvWctKpaosy4EM7O55/IohW0/fNCTOfzfrUNivjydFuA2XwPUiPqC7111O
 DeKlC/t+W1JEvZTiKMi83pKq+9wqhiHmD0qxRHhV57S+MT8e7mdlSKOp7uUkKPkg
 LPlerXosnmeFjL2emuSnKl/tq8pOyruU6uaIGG/uwpbo2W86Dok9GY2GWkQ4pANT
 pDtprc4aJ/Clf6Q0CoKwQbmAozqTDeJo+Und9tRs2KuZRly2bWOcyVE0lyK+Y4s0
 544LcKw2q6cB9ARZ6JExEVRJejPISGKMqo9TaHkyNSIJoiiatKYvNS4WVeFtTgbI
 W+1WfM1svPymNRqVPO1PMLV+3m9dalDH2WjtaFF21uCAQ/G0AuPEHjEDbbx0HIpb
 qrvWmYzZ97Rm/LdYROFRO53nEdCp2jh6c3n4/2kGYM8H0suvGxXZsB1g4i+Dm+B+
 qKVTS282azlDuH9ohXeXizeb6atK6s8TC3Rmew97SmXDO00cUQzEQO/ZquRLHY9r
 n83afQ4OL2Z9yruAxAk7pCshVSyheOsHuFPuZ7bwPW31VMdoWNRkhnaTUXMjGfYg
 3y39IHrCKWNMCCVM1iNl
 =z4d6
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for kernel cycle v4.7:

  Core infrastructural changes:

   - Support for natively single-ended GPIO driver stages.

     This means that if the hardware has registers to configure open
     drain or open source configuration, we use that rather than (as we
     did before) try to emulate it by switching the line to an input to
     get high impedance.

     This is also documented throughly in Documentation/gpio/driver.txt
     for those of you who did not understand one word of what I just
     wrote.

   - Start to do away with the unnecessarily complex and unitelligible
     ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another
     evolutional artifact from the time when the GPIO subsystem was
     unmaintained.

     Archs can now just select GPIOLIB and be done with it, cleanups to
     arches will trickle in for the next kernel.  Some minor archs ACKed
     the changes immediately so these are included in this pull request.

   - Advancing the use of the data pointer inside the GPIO device for
     storing driver data by switching the PowerPC, Super-H Unicore and
     a few other subarches or subsystem drivers in ALSA SoC, Input,
     serial, SSB, staging etc to use it.

   - The initialization now reads the input/output state of the GPIO
     lines, so that each GPIO descriptor knows - if this callback is
     implemented - whether the line is input or output.  This also
     reflects nicely in userspace "lsgpio".

   - It is now possible to name GPIO producer names, line names, from
     the device tree.  (Platform data has been supported for a while).
     I bet we will get a similar mechanism for ACPI one of those days.
     This makes is possible to get sensible producer names for e.g.
     GPIO rails in "lsgpio" in userspace.

  New drivers:

   - New driver for the Loongson1.

   - The XLP driver now supports Broadcom Vulcan ARM64.

   - The IT87 driver now supports IT8620 and IT8628.

   - The PCA953X driver now supports Galileo Gen2.

  Driver improvements:

   - MCP23S08 was switched to use the gpiolib irqchip helpers and now
     also suppors level-triggered interrupts.

   - 74x164 and RCAR now supports the .set_multiple() callback

   - AMDPT was converted to use generic GPIO.

   - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
     support the new single ended callback for open drain and in some
     cases open source.

   - Implement the .get_direction() callback for a few more drivers like
     PL061, Xgene.

  Cleanups:

   - Paul Gortmaker combed through the drivers and de-modularized those
     who are not really modules.

   - Move the GPIO poweroff DT bindings to the power subdir where they
     belong.

   - Rename gpio-generic.c to gpio-mmio.c, which is much more to the
     point.  That's what it is handling, nothing more, nothing less"

* tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits)
  MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
  gpio: zevio: make it explicitly non-modular
  gpio: timberdale: make it explicitly non-modular
  gpio: stmpe: make it explicitly non-modular
  gpio: sodaville: make it explicitly non-modular
  pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error
  gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms
  gpio: dt-bindings: add wd,mbl-gpio bindings
  gpio: of: make it possible to name GPIO lines
  gpio: make gpiod_to_irq() return negative for NO_IRQ
  gpio: xgene: implement .get_direction()
  gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver
  gpio: tegra: Implement gpio_get_direction callback
  gpio: set up initial state from .get_direction()
  gpio: rename gpio-generic.c into gpio-mmio.c
  gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case
  gpio: dwapb: add gpio-signaled acpi event support
  gpio: dwapb: convert device node to fwnode
  gpio: dwapb: remove name from dwapb_port_property
  gpio/qoriq: select IRQ_DOMAIN
  ...
2016-05-17 17:39:42 -07:00
Yong Li 44896beae6 gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2
Galileo Gen2 board uses the PCAL9535 as the GPIO expansion,
it is different from PCA9535 and includes interrupt mask/status registers,
The current driver does not support the interrupt registers configuration,
it causes some gpio pins cannot trigger interrupt events,
this patch fix this issue.

The original patch was submitted by
Josef Ahmad <josef.ahmad@linux.intel.com>
http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel-quark/tree/recipes-kernel/linux/files/0015-Quark-GPIO-1-2-quark.patch

Signed-off-by: Yong Li <yong.b.li@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-09 20:14:36 +02:00
Yong Li 9b8e3ec343 gpio: pca953x: Use correct u16 value for register word write
The current implementation only uses the first byte in val,
the second byte is always 0. Change it to use cpu_to_le16
to write the two bytes into the register

Cc: stable@vger.kernel.org
Signed-off-by: Yong Li <sdliyong@gmail.com>
Reviewed-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-08 11:49:47 +02:00
Geert Uytterhoeven e0a8604f13 gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit
pca953x_gpio_set_multiple() divides by 4 to convert from longs to bytes,
which assumes a 32-bit platform, and is not correct on 64-bit platforms.
Use "sizeof(...)" instead to fix this.

Cc: stable@vger.kernel.org
Fixes: b4818afeac ("gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-16 13:03:14 +01:00
Laxman Dewangan 0ece84f54a gpio: pca953x: Use devm_gpiochip_add_data() for gpio registration
Use devm_gpiochip_add_data() for GPIO registration.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-02-23 20:35:38 +05:30
Linus Walleij 468e67f6eb gpio: pca953x: use gpiochip data pointer
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Markus Pargmann <mpa@pengutronix.de>
Cc: Toby Smith <toby@tismith.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05 11:21:11 +01:00
Phil Reid b4818afeac gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.
Tested with TCA6408 / TCA6416 devices.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-10 23:57:43 +01:00
Linus Walleij c2369d3f8c gpio: pca953x: make inclusion of <linux/of_platform.h> unconditional
After adding the DT matching in
commit 6f29c9afbe
"gpio: pca935x: fix of-only probed devices"
compilation fails like this:

CC [M]  drivers/gpio/gpio-pca953x.o
gpio-pca953x.c: In function ‘pca953x_probe’:
gpio-pca953x.c:693:11: error: implicit declaration of
function ‘of_match_device’ [-Werror=implicit-function-declaration]
match = of_match_device(pca953x_dt_ids, &client->dev);
        ^
gpio-pca953x.c:693:9: warning: assignment makes pointer from
integer without a cast [-Wint-conversion]
match = of_match_device(pca953x_dt_ids, &client->dev);
        ^
cc1: some warnings being treated as errors
../scripts/Makefile.build:264: recipe for target
'drivers/gpio/gpio-pca953x.o' failed

After removing the conditional inclusion guards compilation
works fine again. Might be a module problem so that
fix.

Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-09 11:05:59 +01:00
Ben Dooks 6f29c9afbe gpio: pca935x: fix of-only probed devices
If the pca953x device is probed from OF using the proper OF probing then
the i2c-client will be NULL and the device probe will fail as id is NULL
and it isn't an ACPI device (previous drivers would simply OOPS out).

Add support for the of_device_id table having the same data as the others
so that the correct paths will be taken when registering a device.

An example of current valid of node which did not work:

	gpio@38 {
		compatible = "onsemi,pca9654", "nxp,pca9534";
		reg = <0x38>;
		interrupt-parent = <&gpio5>;
		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
	};

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-09 08:06:10 +01:00
Ben Dooks 9f49f6dd04 gpio: pca953x: add onsemi,pca9654 id
Add onsemi,pca9654 which is also compatible with the nxp,pca9524 as it
is an 8bit expander with an interrupt output.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-09 08:04:38 +01:00
Linus Walleij 58383c7842 gpio: change member .dev to .parent
The name .dev in a struct is normally reserved for a struct device
that is let us say a superclass to the thing described by the struct.
struct gpio_chip stands out by confusingly using a struct device *dev
to point to the parent device (such as a platform_device) that
represents the hardware. As we want to give gpio_chip:s real devices,
this is not working. We need to rename this member to parent.

This was done by two coccinelle scripts, I guess it is possible to
combine them into one, but I don't know such stuff. They look like
this:

@@
struct gpio_chip *var;
@@
-var->dev
+var->parent

and:

@@
struct gpio_chip var;
@@
-var.dev
+var.parent

and:

@@
struct bgpio_chip *var;
@@
-var->gc.dev
+var->gc.parent

Plus a few instances of bgpio that I couldn't figure out how
to teach Coccinelle to rewrite.

This patch hits all over the place, but I *strongly* prefer this
solution to any piecemal approaches that just exercise patch
mechanics all over the place. It mainly hits drivers/gpio and
drivers/pinctrl which is my own backyard anyway.

Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Alek Du <alek.du@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19 09:24:35 +01:00
Andy Shevchenko f32517bf1a gpio: pca953x: support ACPI devices found on Galileo Gen2
This patch adds a support of the expandes found on Intel Galileo Gen2 board.
The platform information comes from ACPI.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-05 10:57:22 +02:00
Andy Shevchenko c6664149af gpio: pca953x: store driver_data for future use
Instead of using id->driver_data directly we copied it to the internal
structure. This will help to adapt driver for ACPI use.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-05 10:56:22 +02:00
Thierry Reding 2db8aba860 gpio: pca953x: Add TI TCA9539 support
The TCA9539 is almost identical to the PCA9555 and software-compatible
with this driver. It exposes 16 general purpose I/O pins in two 8-bit
configurations.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 15:06:42 -07:00
Nicholas Krause c75a377204 gpio: Fix error checking in the function device_pca957x_init
This fixes error checking in the function device_pca957x_init
to properly check and return error code values from the calls
to the function pca953x_write_regs if they fail as to properly
signal callers when a error occurs due a failure when writing
registers for this gpio based device.

Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02 04:19:34 -07:00
Grygorii Strashko fdd50409c8 gpio: pca953x: fix nested irqs rescheduling
pca953x interrupt controller functionality is implemented using
nested threaded IRQs which require parent_irq to be configured
properly otherwise below warning can be seen if IRQ core
will try re-schedule nested IRQ:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 12 at kernel/irq/manage.c:696 irq_nested_primary_handler+0x30/0x38()
Primary handler called for nested irq 301
Modules linked in: uinput ipv6 smsc95xx usbnet mii imx2_wdt etnaviv(C) matrix_keypad matrix_keymap ar1021_i2c
CPU: 1 PID: 12 Comm: ksoftirqd/1 Tainted: G        WC    4.1.1 #9
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<c0013298>] (dump_backtrace) from [<c0013488>] (show_stack+0x20/0x24)
[<c0013468>] (show_stack) from [<c05743c4>] (dump_stack+0x70/0xc0)
[<c0574354>] (dump_stack) from [<c002b7b8>] (warn_slowpath_common+0x88/0xc0)
[<c002b730>] (warn_slowpath_common) from [<c002b8ac>] (warn_slowpath_fmt+0x40/0x48)
[<c002b870>] (warn_slowpath_fmt) from [<c0075798>] (irq_nested_primary_handler+0x30/0x38)
[<c0075768>] (irq_nested_primary_handler) from [<c0075200>] (handle_irq_event_percpu+0x70/0x2d0)
[<c0075190>] (handle_irq_event_percpu) from [<c00754ac>] (handle_irq_event+0x4c/0x6c)
[<c0075460>] (handle_irq_event) from [<c0078204>] (handle_simple_irq+0xa4/0xc8)
[<c0078160>] (handle_simple_irq) from [<c0077cd4>] (resend_irqs+0x50/0x7c)
[<c0077c84>] (resend_irqs) from [<c002f99c>] (tasklet_action+0x94/0x140)
[<c002f908>] (tasklet_action) from [<c002eea8>] (__do_softirq+0xa0/0x3c8)
[<c002ee08>] (__do_softirq) from [<c002f208>] (run_ksoftirqd+0x38/0x54)
[<c002f1d0>] (run_ksoftirqd) from [<c004b1e4>] (smpboot_thread_fn+0x1f8/0x2f0)
[<c004afec>] (smpboot_thread_fn) from [<c0047744>] (kthread+0xe8/0x104)
[<c004765c>] (kthread) from [<c000fac8>] (ret_from_fork+0x14/0x2c)
---[ end trace 96052cda48865769 ]---

The issue was reported and described in details by Lothar Waßmann and
Christian Gmeiner in https://lkml.org/lkml/2014/9/9/123.

Fix it by adding missed call of gpiochip_set_chained_irqchip()
so GPIO IRQ chip helpers will set parent_irq for nested IRQs
properly.

Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Tested-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16 14:40:08 +02:00
Joshua Scott b6ac1280b6 gpio: Prevent an integer overflow in the pca953x driver
Interrupts were missed if an 8-bit integer overflow occurred. This was
observed when bank0,pin7 and bank1,pin7 changed simultaniously.

As the 8-bit totals were only checked against zero, replace them with
booleans. Name the booleans so that their purpose is clear.

Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01 16:53:55 +02:00
Colin Cronin 20a8a96873 Drivers: gpio: Fix spelling errors
Fixed several spelling errors in gpio-lynxpoint, gpio-pca953x,
gpio-tegra, gpio-zynq, gpiolib-of, gpiolib.

Signed-off-by: Colin Cronin <colinpatrickcronin@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-19 16:52:30 +02:00
Markus Pargmann 4bb93349d9 gpio: pca953x: Drop deprecated DT bindings
Drop deprecated DT bindings and use automaticly assigned gpio and irq
bases.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-28 14:19:40 +02:00
abdoulaye berthe 9f5132ae82 gpio: remove all usage of gpio_remove retval in driver/gpio
Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-22 16:39:26 +02:00
Linus Walleij 7bcbce55f2 gpio: pca953x: use gpiolib irqchip helpers
This switches the PCA953x driver over to using the gpiolib irqchip
helpers to handle the threaded interrups cascaded off this
GPIO chip.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-28 15:29:23 +02:00
Toby Smith 91329132c9 gpio: pca953x: request a shared interrupt
Request a shared interrupt when requesting a pca953x GPIO interrupt

Signed-off-by: Toby Smith <toby@tismith.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09 12:58:12 +02:00
Toby Smith 3275d0723a gpio: pca953x: return IRQ_NONE when appropriate
The irq handler should return IRQ_NONE or IRQ_HANDLED to report
if we have handled the interrupt.

Signed-off-by: Toby Smith <toby@tismith.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09 12:55:26 +02:00
Aaron Sierra 2b1f597f7f gpio: pca953x: Fix gpio_base may not default to -1
If no device tree node existed for a device when CONFIG_OF_GPIO was
defined, then gpio_base would not default to -1.

Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-13 14:04:30 +01:00
Aaron Sierra e73760a605 gpio: pca953x: Add Exar XRA1202
Add Exar XRA1202 8-bit GPIO expander to supported list.

Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Graeme Smecher <gsmecher@threespeedlogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-13 14:02:19 +01:00
Aaron Sierra eb32b5aae9 gpio: pca953x: Add NXP PCA9698
Add the NXP PCA9698 40-bit GPIO expander to the supported list.
Note: This only enables GPIO functionality.

Tested-by: Bob Schmitz <bschmitz@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Graeme Smecher <gsmecher@threespeedlogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-13 14:00:18 +01:00
Aaron Sierra 1e1916950b gpio: pca953x: Add devices to Kconfig help
The pca953x driver supports tca6424 (24-bit) and pca9505 (40-bit)
devices. They were the only supported devices not mentioned in the
Kconfig help.

Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Graeme Smecher <gsmecher@threespeedlogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-13 13:57:41 +01:00
Linus Walleij 9fb1f39eb2 gpio/pinctrl: make gpio_chip members typed boolean
This switches the two members of struct gpio_chip that were
defined as unsigned foo:1 to bool, because that is indeed what
they are. Switch all users in the gpio and pinctrl subsystems
to assign these values with true/false instead of 0/1. The
users outside these subsystems will survive since true/false
is 1/0, atleast we set some kind of more strict typing example.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-04 14:42:46 +01:00
Graeme Smecher e5304db8d7 gpio: pca953x: Don't flip bits on PCA957x GPIO expanders when probing them.
The pca957x driver supports a handful of I2C GPIO expanders from NXP, Maxim,
and TI. For the PCA9574 and PCA9575 devices only, the driver resets the GPIO
level and direction in the pca957x_probe function. This seems like the wrong
thing to do, since it can cause hardware bit twiddles during warm reboots when
the chip state and reset values don't match.

This kind of initialization is best left upstream (in a bootloader) or
downstream (in userspace). It's also an inconsistency across devices supported
by this driver.

This patch is NOT boot-tested: the SoC I'm  using is stuck on 2.6.37, and the
patch doesn't apply trivially.

Signed-off-by: Graeme Smecher <gsmecher@threespeedlogic.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-23 12:57:11 +02:00
Linus Torvalds 27c7651a6a This is the bulk of GPIO changes for the v3.12 series:
- A new driver for the TZ1090 PDC which is used on the metag
   architecture.
 
 - A new driver for the Kontron ETX or COMexpress GPIO block.
   This is found on some ETX x86 devices.
 
 - A new driver for the Fintek Super-I/O chips, used on
   some x86 boards.
 
 - Added device tree probing on a few select GPIO blocks.
 
 - Drop the Exynos support from the Samsung GPIO driver.
   The Samsung maintainers have moved over to use the
   modernized pin control driver to provide GPIO for the
   modern platforms instead.
 
 - The usual bunch of non-critical fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKZvzAAoJEEEQszewGV1zUg8QAMAqM90/U/0c73fxS28BbN6+
 5bO3a/l9JZYWHyk+739oFZqMUoPDKcq/IOSbirxdgpWE3zcF34ogNfIgSoAL77C5
 3yGa2Lclkxmngo8ZXXeu6DSTq82rlaVjCcHcXw/qd6lVAZT8YaS364vGYpcENPxI
 s1yfrCZy89kZQufX++ytcbIUj75KXHvd9MK9IRE4BVkQMgLXAX/oSbTdB5PhFb79
 J5ls0T1c8JRxI4sj32ZDh6dfeKGsRQF20z6OO5o0ZIyQ+ZGLJPlYatdivJelQz9J
 P67suwn86RXfABISYle2YbNmy3zX+wEyG2nHASDL7hSfWtGpZ5ANJTXqrKjwFITL
 sfqQhMtHDZ7fNbgA0kOyE25kgLybsJZNxR/PJGEHteT1+XZHi2nsP2NTNuxxEKjb
 6NyLXrYXb0VK/poG+ZYXH2tt0C02pg3MfN9y+nfh8reG2bfeLvL/cU7DiQgMUGEf
 DXwgXQdgow9dHus/ZuCuWz4xqAfqk5VRS8ba6Wg2F8uLaXY1qYM6mNeatzTfP3fg
 5jALMy038l7yMBMFnTp8GCb78/iIXWLtEejtgoowBuGbZtOjii8wEExHvl4tCabQ
 PbB9pG8+ojjiQPk2t1ZFFUqX6hCGBFrJbYnJj2vfftBHiFnz5bKrcSBOWVdTWgco
 YqURqegvZVin4aQNGFF2
 =oEK9
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v3.12 series:

   - A new driver for the TZ1090 PDC which is used on the metag
     architecture.

   - A new driver for the Kontron ETX or COMexpress GPIO block.  This is
     found on some ETX x86 devices.

   - A new driver for the Fintek Super-I/O chips, used on some x86
     boards.

   - Added device tree probing on a few select GPIO blocks.

   - Drop the Exynos support from the Samsung GPIO driver.

     The Samsung maintainers have moved over to use the modernized pin
     control driver to provide GPIO for the modern platforms instead.

   - The usual bunch of non-critical fixes and cleanups"

* tag 'gpio-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (36 commits)
  gpio: return -ENOTSUPP if debounce cannot be set
  gpio: improve error path in gpiolib
  gpio: add GPIO support for F71882FG and F71889F
  of: add vendor prefix for Microchip Technology Inc
  gpio: mcp23s08: rename the device tree property
  gpio: samsung: Drop support for Exynos SoCs
  gpio: pcf857x: Remove pdata argument to pcf857x_irq_domain_init()
  gpio: pcf857x: Sort headers alphabetically
  gpio: max7301: Reverting "Do not force SPI speed when using OF Platform"
  gpio: Fix bit masking in Kontron PLD GPIO driver
  gpio: pca953x: fix gpio input on gpio offsets >= 8
  drivers/gpio: simplify use of devm_ioremap_resource
  drivers/gpio/gpio-omap.c: convert comma to semicolon
  gpio-lynxpoint: Fix warning about unbalanced pm_runtime_enable
  gpio: Fix platform driver name in Kontron PLD GPIO driver
  gpio: adnp: Fix segfault if request_threaded_irq fails
  gpio: msm: Staticize local variable 'msm_gpio'
  gpio: gpiolib-of.c: make error message more meaningful by adding the node name and index
  gpio: use dev_get_platdata()
  gpio/mxc: add chained_irq_enter/exit() to mx2_gpio_irq_handler
  ...
2013-09-07 10:53:00 -07:00
Vivien Didelot 5877457a96 gpio: (gpio-pca953x) move header to linux/platform_data/
This patch moves the pca953x.h header from include/linux/i2c to
include/linux/platform_data and updates existing support accordingly.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29 12:33:52 -07:00
Andrew Ruder 40a625daa8 gpio: pca953x: fix gpio input on gpio offsets >= 8
This change fixes a regression introduced by commit
f5f0b7aa8 (gpio: pca953x: make the register access by GPIO bank)

When the pca953x driver was converted to using 8-bit reads/writes
the bitmask in pca953x_gpio_get_value wasn't adjusted with a
modulus BANK_SZ and consequently looks at the wrong bits in the
input register.

Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16 17:19:16 +02:00
Jingoo Han e56aee1897 gpio: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16 15:24:35 +02:00
Linus Torvalds 30c67e93c5 GPIO changes for Linux 3.10
The usual selection of bug fixes and driver updates for GPIO. Nothing
 really stands out except the addition of the GRGPIO driver and some
 enhacements to ACPI support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRhuKVAAoJEEFnBt12D9kB8kUP/21N7fsCxNocqoIwX8VQPfEY
 KsXUKRstuETHERHpGCSvMuRAEy1vee9itijrmWOiQT09jztIxg3Sed3u0RCQjQEK
 mV87RdAObZzm6xTIpy5sQa1bMOlc2AzYhTDDr9f1OpU+L9XMhwq03wq/i74Zij3w
 7vq5BkBfGWF84TY5ZG1SNIvtw9P2MYoCHtJKvFyTJWAH05m2bHSfuvvn8vIdcUBL
 TuVwoeUzbYJtTJatovkh0kyMOOZEh9JVWBPBTNNLyYDmpAKQ6RwBoAi0ZznmF4mk
 gp88dj6iMHebi7UnlDQJD5crw16cRoMh0pa3EBAjYM0IVhfn8AvFIhma34wTs1Z/
 ZuWwwHeR93cQTKwMBT1OHRCPaOdjS5riAR4WJm5Tmq9dV0sjGlbwff26U1uHH8qX
 mTBA+tje4bVpSHEztmXyw0AOMUv2vid5P0F/sKtEHzfURf8Yjq8xvxyvq14T3dQQ
 /wzmdLKbzR05phft7Xxa4yzfSy46uvxyUJQQaKdU/jlay/gJFisJXJE0cOrwTOFo
 SpTCmjnacr8Tlqr04Fj8f8ZgOYrg5VAOUsVE8uY0ETWRCb7iezFw7JGE3qV1kZQk
 N1lPBbSnIwtkdMiEmyttxpFEb5PwJxX8pUP6JfNyMbMlHoZs2247SeakhRQs/OCx
 goJQEGz6eeOpvq7koiJg
 =PwUd
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux

Pull GPIO changes from Grant Likely:
 "The usual selection of bug fixes and driver updates for GPIO.  Nothing
  really stands out except the addition of the GRGPIO driver and some
  enhacements to ACPI support"

I'm pulling this despite the earlier mess.  Let's hope it compiles these
days.

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (46 commits)
  gpio: grgpio: Add irq support
  gpio: grgpio: Add device driver for GRGPIO cores
  gpiolib-acpi: introduce acpi_get_gpio_by_index() helper
  GPIO: gpio-generic: remove kfree() from bgpio_remove call
  gpio / ACPI: Handle ACPI events in accordance with the spec
  gpio: lpc32xx: Fix off-by-one valid range checking for bank
  gpio: mcp23s08: convert driver to DT
  gpio/omap: force restore if context loss is not detectable
  gpio/omap: optimise interrupt service routine
  gpio/omap: remove extra context restores in *_runtime_resume()
  gpio/omap: free irq domain in probe() failure paths
  gpio: gpio-generic: Add 16 and 32 bit big endian byte order support
  gpio: samsung: Add terminating entry for exynos_pinctrl_ids
  gpio: mvebu: add dbg_show function
  MAX7301 GPIO: Do not force SPI speed when using OF Platform
  gpio: gpio-tps65910.c: fix checkpatch error
  gpio: gpio-timberdale.c: fix checkpatch error
  gpio: gpio-tc3589x.c: fix checkpatch errors
  gpio: gpio-stp-xway.c: fix checkpatch error
  gpio: gpio-sch.c: fix checkpatch error
  ...
2013-05-06 15:40:55 -07:00
Alexandre Belloni e7a7f972f9 gpio: pca953x: fix irq_domain_add_simple usage
We actually have to pass chip as the host_data parameter of
irq_domain_add_simple() as later on, it is used to initialize chip_data
in pca953x_gpio_irq_map(). Failing to do so is leading to a NULL pointer
dereference after calling irq_data_get_irq_chip_data() in
pca953x_irq_mask(), pca953x_irq_unmask(), pca953x_irq_bus_lock(),
pca953x_irq_bus_sync_unlock() and pca953x_irq_set_type().

Fixes regression introduced by commit
0e8f2fdacf (gpio: pca953x: use simple
irqdomain)

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-11 19:01:19 +02:00
Laurent Navet 50e44430c6 gpio: gpio-pca953x.c: fix checkpatch error
Fix :
 gpio/gpio-pca953x.c:150: ERROR: else should follow close brace '}'

Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27 16:05:15 +01:00
Linus Walleij b42748c970 gpio: pca953x: use managed resources
Using the devm_* managed resources the pca driver can be simplified
and cut down on boilerplate code.

[gcl: fixed a inccorect reference to a removed label, "goto fail_out"
became "return ret"]

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-28 11:17:04 +01:00
Gregory CLEMENT 0e8f2fdacf gpio: pca953x: use simple irqdomain
This switches the legacy irqdomain to the simple one, which will
auto-allocate descriptors, and also make sure that we use
irq_create_mapping() in the to_irq function. Also use the map function
of irq_domain_ops to setup the irq configuration on demand and no more
statically during the initialization of the driver.

Based on a initial patch from Linus Walleij <linus.walleij@linaro.org>

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-28 11:15:31 +01:00
Gregory CLEMENT 89f5df01c6 gpio: pca953x: add support for pca9505
Now that pca953x driver can handle GPIO expanders with more than 32
bits this patch adds the support for the pca9505 which cam with 40
GPIOs.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-25 09:03:40 +01:00
Gregory CLEMENT f5f0b7aa89 gpio: pca953x: make the register access by GPIO bank
Until now the pca953x driver accessed all the bank of a given register
in a single command using only a 32 bits variable. New expanders from
the pca53x family come with 40 GPIOs which no more fit in a 32
variable. This patch make access to the registers more generic by
relying on an array of u8 variables. This fits exactly the way the
registers are represented in the hardware.

It also adds helpers to access to a single register of a bank instead
of reading or writing all the banks for a given register.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-25 09:02:10 +01:00
Linus Torvalds cff2f741b8 Driver core updates for 3.8-rc1
Here's the large driver core updates for 3.8-rc1.
 
 The biggest thing here is the various __dev* marking removals.  This is
 going to be a pain for the merge with different subsystem trees, I know,
 but all of the patches included here have been ACKed by their various
 subsystem maintainers, as they wanted them to go through here.
 
 If this is too much of a pain, I can pull all of them out of this tree
 and just send you one with the other fixes/updates and then, after
 3.8-rc1 is out, do the rest of the removals to ensure we catch them all,
 it's up to you.  The merges should all be trivial, and Stephen has been
 doing them all in linux-next for a few weeks now quite easily.
 
 Other than the __dev* marking removals, there's nothing major here, some
 firmware loading updates and other minor things in the driver core.
 
 All of these have (much to Stephen's annoyance), been in linux-next for
 a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlDHkPkACgkQMUfUDdst+ykaWgCfW7AM30cv0nzoVO08ax6KjlG1
 KVYAn3z/KYazvp4B6LMvrW9y0G34Wmad
 =yvVr
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the large driver core updates for 3.8-rc1.

  The biggest thing here is the various __dev* marking removals.  This
  is going to be a pain for the merge with different subsystem trees, I
  know, but all of the patches included here have been ACKed by their
  various subsystem maintainers, as they wanted them to go through here.

  If this is too much of a pain, I can pull all of them out of this tree
  and just send you one with the other fixes/updates and then, after
  3.8-rc1 is out, do the rest of the removals to ensure we catch them
  all, it's up to you.  The merges should all be trivial, and Stephen
  has been doing them all in linux-next for a few weeks now quite
  easily.

  Other than the __dev* marking removals, there's nothing major here,
  some firmware loading updates and other minor things in the driver
  core.

  All of these have (much to Stephen's annoyance), been in linux-next
  for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio
update.

* tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits)
  modpost.c: Stop checking __dev* section mismatches
  init.h: Remove __dev* sections from the kernel
  acpi: remove use of __devinit
  PCI: Remove __dev* markings
  PCI: Always build setup-bus when PCI is enabled
  PCI: Move pci_uevent into pci-driver.c
  PCI: Remove CONFIG_HOTPLUG ifdefs
  unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs
  sh/PCI: Remove CONFIG_HOTPLUG ifdefs
  powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs
  mips/PCI: Remove CONFIG_HOTPLUG ifdefs
  microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs
  dma: remove use of __devinit
  dma: remove use of __devexit_p
  firewire: remove use of __devinitdata
  firewire: remove use of __devinit
  leds: remove use of __devexit
  leds: remove use of __devinit
  leds: remove use of __devexit_p
  mmc: remove use of __devexit
  ...
2012-12-11 13:13:55 -08:00
Bill Pemberton 3836309d93 gpio: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 11:39:33 -08:00
Maxime Ripard ed32620ea7 gpio: pca953x: Add compatible strings to gpio-pca953x driver
Even though the device tree binding code was already written, the
compatible strings were not yet in the driver.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17 21:09:54 +01:00
Maxime Ripard 55ecd26373 gpio: pca953x: Register an IRQ domain
The PCA953x used to register no IRQ domain, which made it impossible to
use it as an interrupt-parent from the device tree.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17 21:08:32 +01:00
Leed Aguilar ca3ffe910f gpio/pca953x: increase variables size to support 24 bit of data
Increase variable size from u16 to u32 to allocate 24 bit of data required for
the TCA6424 I/O expander device type.

Signed-off-by: Leed Aguilar <leed.aguilar@ti.com>
Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-17 21:00:18 +02:00