Commit Graph

11 Commits

Author SHA1 Message Date
Jianxin Xiong bf77cc34f3 ib_pack.h: Add opcode definition for send with invalidate
The opcode for "SEND Last with Invalidate" and "SEND Only with
Invalidate" have been defined for RC in IBA Specification Vol 1
since Release 1.2. Add the definition to the header file in
preparation of supporting these opcodes in rdmavt based drivers.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-13 19:39:19 -04:00
Moni Shoua 3ef967a4af IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers
RoCEv2 packets are sent over IP/UDP protocols.
The mlx4 driver uses a type of RAW QP to send packets for QP1 and
therefore needs to build the network headers below BTH in software.

This patch adds option to build QP1 packets with IP and UDP headers if
RoCEv2 is requested.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19 15:35:01 -05:00
Moni Shoua 25f40220e5 IB/core: Initialize UD header structure with IP and UDP headers
ib_ud_header_init() is used to format InfiniBand headers
in a buffer up to (but not with) BTH. For RoCE UDP ENCAP it is
required that this function would be able to build also IP and UDP
headers.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23 10:39:53 -05:00
Hal Rosenstock 931cf9a3e5 ib_pack.h: Fix commentary IBA reference for CNP in IB opcode enum
IBA spec is now 1.3 not 3.1 and vol 1 should be mentioned
as there is also vol 2.

Signed-off-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-21 16:41:54 -04:00
Dennis Dalessandro d4ab347005 IB/core: Add core header changes needed for OPA
This patch adds the value of the CNP opcode to the existing list of enumerated
opcodes in ib_pack.h

Add common OPA header definitions for driver
build:
- opa_port_info.h
- opa_smi.h
- hfi1_user.h

Additionally, ib_mad.h, has additional definitions
that are common to ib_drivers including:
- trap support
- cca support

The qib driver has the duplication removed in favor
those in ib_mad.h

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: John, Jubin <jubin.john@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28 22:54:50 -04:00
Matan Barak dd5f03beb4 IB/core: Ethernet L2 attributes in verbs/cm structures
This patch add the support for Ethernet L2 attributes in the
verbs/cm/cma structures.

When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority
in a similar manner that the IB L2 (and the L4 PKEY) attributes are used.

Thus, those attributes were added to the following structures:

* ib_ah_attr - added dmac
* ib_qp_attr - added smac and vlan_id, (sl remains vlan priority)
* ib_wc - added smac, vlan_id
* ib_sa_path_rec - added smac, dmac, vlan_id
* cm_av - added smac and vlan_id

For the path record structure, extra care was taken to avoid the new
fields when packing it into wire format, so we don't break the IB CM
and SA wire protocol.

On the active side, the CM fills. its internal structures from the
path provided by the ULP.  We add there taking the ETH L2 attributes
and placing them into the CM Address Handle (struct cm_av).

On the passive side, the CM fills its internal structures from the WC
associated with the REQ message.  We add there taking the ETH L2
attributes from the WC.

When the HW driver provides the required ETH L2 attributes in the WC,
they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core
code checks for the presence of these flags, and in their absence does
address resolution from the ib_init_ah_from_wc() helper function.

ib_modify_qp_is_ok is also updated to consider the link layer. Some
parameters are mandatory for Ethernet link layer, while they are
irrelevant for IB.  Vendor drivers are modified to support the new
function signature.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14 14:20:54 -08:00
Eli Cohen af7bd46376 IB/core: Add VLAN support for IBoE
Add 802.1q VLAN support to IBoE. The VLAN tag is encoded within the
GID derived from a link local address in the following way:

    GID[11] GID[12] contain the VLAN ID when the GID contains a VLAN.

The 3 bits user priority field of the packets are identical to the 3
bits of the SL.

In case of rdma_cm apps, the TOS field is used to generate the SL
field by doing a shift right of 5 bits effectively taking to 3 MS bits
of the TOS field.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 10:20:39 -07:00
Eli Cohen ff7f5aab35 IB/pack: IBoE UD packet packing support
Add support for packing IBoE packet headers.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>

[ Clean up and fix ib_ud_header_init() a bit.  - Roland ]

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-14 12:41:29 -07:00
Eli Cohen 920d706c89 IB/core: Fix and clean up ib_ud_header_init()
ib_ud_header_init() first clears header and then fills up the various
fields.  Later on, it tests header->immediate_present, which it has
already cleared, so the condition is always false.  Fix this by adding
an immediate_present parameter and setting header->immediate_present
as is done with grh_present.  Also remove unused calculation of
header_len.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24 14:54:10 -08:00
Dotan Barak 4deccd6d95 RDMA: Improve include file coding style
Remove subversion $Id lines and improve readability by fixing other
coding style problems pointed out by checkpatch.pl.

Signed-off-by: Dotan Barak <dotanba@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:44 -07:00
Roland Dreier a4d61e8480 [PATCH] IB: move include files to include/rdma
Move the InfiniBand headers from drivers/infiniband/include to include/rdma.
This allows InfiniBand-using code to live elsewhere, and lets us remove the
ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:38 -07:00