V3: Get rid of separate interrupt pool. This is well handled
by irq_get_descs and irq_free_descs. Two functions I simply
wasn't aware of previously. Thus the allocation for a given
trigger is now handled by core code rather than us reinventing
the wheel.
V2: Stop silly name duplication.
Move pool handling to industrialio-trigger as that is the only user.
Changed over to using irq_modify_status rather than the arm
specific set_irq_flags as per Thomas Gleixner's suggestion.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We have moved the timestamp acquisition into the bottom half. It may
technically be less accurate but for this device I very much doubt
anyone cares!
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This requires all drivers using the channel registration code and
events to change in one go.
V3: remove unwanted irq enable from event handler.
V2: rebase related fixes to move to new IIO_CHAN macro. All trivial.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Another driver that has two event lines, but pushes all events out
the same chrdev. Probably needs a rethink.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This device actually has a pair of interrupts. The code basically ignores
that and feeds them both to the same handlers. I'm not sure if that is
the right thing to do, but the updated code should do exactly the same.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver needed some tender loving care. It still does.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Another one where the events are 'unusual'. Still left sorting
that out for another day.
Untested changes
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
a) This interface is going away
b) There is no matching register call so looks like a cut and paste
error
Trivial sparse warning fix.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Another driver with some very 'non standard' magic event codes.
Again I've left it be for now and merely moved it to the new
api.
There is no reason why the irq in this driver ever had to be a gpio.
Scrap that test and clean out unecessary headers.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I'm not sure what the event is and am very much against the dodgy
hack to give it a code. However for now, lets just stop it using
the deprecated core handling so we can move on.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nice simple one. Not sure we actually want devices outputting
datardy signals like that, but I'll leave it for now.
Cleaned up some unneeded functions whilst here.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Note this driver is still a long way from being abi compliant.
What I have done here cleans up a few corners, but primarily gets
it away from using the infrastructure that is going away.
Untested
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This element has been usused by the core for quite some time. sca3000 set it none the less
until the rewrite in the previous patch (and hence didn't work).
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fairly substantial rewrite as the code had bitrotted.
A rethink is needed for how to handle variable types in the new chan_spec world.
This patch restores sca3000 buffer usage to a working state.
V3: Rebase fixups.
V2: Move to new version of IIO_CHAN macro
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This removes the one and only real user of the rather complex event list management.
V3: More trivial rebase fixups.
V2: Trivial rebase fixup.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It is much easier to do in driver, and the core does not add much.
Note all drivers will have to be updated with this patch.
None currently are.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As Arnd observed, things are clearner if we pass iio_dev into read and write fucntions.
Now uses st for lis3l02dq_state everywhere.
Other bits of trivial tidying.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Given we now only have one device we don't need the extra layer any more.
Hence this patch removes it.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
part of sca3000 driver temporarily disabled (buffer won't run
anyway). This section is replaced later in this patch set.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Whilst it is possible to output events to say buffers have passed
a particular level there are no obvious reasons to actually do so.
The upshot of this patch is that buffers will only ever have
one threshold turned on at a time.
For now sca3000 has it's ring buffer effectively disabled.
Fixed later in series.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
V3: move to single chan registration macro. Also introduce some
local macros to greatly reduce code length when setting up the
chan_spec arrays for all the different devices.
V2: update read_raw for two value approach.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
V3: Move to single IIO_CHAN macro.
V2: Update to two part read_raw value.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
V8: Add missing address in IIO_CHAN macro. Spotted by Michael Hennerich.
V7: Document additions to iio_dev structure.
V6: Fixup the docs for iio_chan_spec structure.
V5: Actually have the macro handle the _input type channels (oops)
V4: Add ability to do, _input and modified channel naming in a coherent fashion.
Scrap all the messy IIO_CHAN_* macros and move to only one.
V3: Added more types - intensity and light.
V2: Various fixes - some thanks to Arnd.
Bug fix for unregistering of event attr group
Changed iio_read_channel_info to have two part value - use for
raw value read as well.
constify the channelspec structures
raw write support for calibbias and similar
Additional strings for buidling attribute names.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is an implementation of a NVidia compliant embedded controller
protocol driver. It is used on some ARM-Tegra boards for device
communication.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
KERN_ERR should be used in place of KERN_INFO in the case of
error scenarios.
Signed-off-by: anish kumar <anish198519851985@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The preferred form for passing a size of a struct is the following:
p = kmalloc(sizeof(*p), ...);
Please refer Documentation/Codingstyle chapter 14
Signed-off-by: anish kumar <anish198519851985@gmail.com>
Acked-by: Harry Wei <harryxiyou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch is to remove extra spaces,redundant code and using
ARRAY_SIZE macros.
Signed-off-by: anish kumar <anish198519851985@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix mei build when CONFIG_PM is not enabled (i.e., fix typo):
drivers/staging/mei/main.c:1159: error: 'MEI_PM_OPS' undeclared here (not in a function)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use __attribute__((unused)) to suppress error until it can be determined
that remote_host is not needed.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for automatically associating a vmk8055 device with a
comedi device (previously the user had to use comedi_num_legacy_minors
to reserve device slots and then associate them with vmk8055 devices
using comedi_config).
Tested on multiple K8055s, but not on K8061s.
Signed-off-by: J. Ali Harlow <ali@avrc.city.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Calling comedi_dio_bifield2() returns EBUSY permanently. Implementing
the insn_bits call fixes the problem and is good in its own right since
one can then read and write to all the digitial lines at the same time.
Tested on a K8055, but not on a K8061.
Signed-off-by: J. Ali Harlow <ali@avrc.city.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
rudimentary_check() can currently check whether the input or
output direction is currently available (no pending transaction),
but not both at the same time. We need this facility for do_bits().
Signed-off-by: J. Ali Harlow <ali@avrc.city.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
vmk80xx_di_rinsn() and vmk80xx_do_rinsn() extract the required channel
data by inconsistent and overly-complex algorithms. Simplify them both.
Signed-off-by: J. Ali Harlow <ali@avrc.city.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Digitial input and output sub-devices were reporting a maxdata of
0x1F and 0xFF respectively. They should both be 1.
Signed-off-by: J. Ali Harlow <ali@avrc.city.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
rudimentary_check is a macro with side-effects (it returns
on error) which is contary to CodingStyle. Replace it with
a static function.
Signed-off-by: J. Ali Harlow <ali@avrc.city.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This code is in a loop that currently is only executed once. Because of
this property, the first block of code is currently actually correct.
Nevertheless, the comments associated with the code suggest that the loop
is planned to take more than one iteration in the future, and thus this
patch is made with that case in mind.
In the first block of code, there is currently an immediate abort from the
function. It is changed to jump to the error handling code at fail, to be
able to unregister and free the resources allocated on previous iterations.
In the second block of code, the input_dev for the current iteration has
been allocated, but has not been registered. It has also not been stored
in ts->cp_input_info[i].input. Thus on jumping to fail, it will not be
freed. In this case, we want to free, but not unregister, so the free for
this most recently allocated resource is put before the jump.
A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)
// <smpl>
@r exists@
local idexpression struct input_dev * x;
expression ra,rr;
position p1,p2;
@@
x = input_allocate_device@p1(...)
... when != x = rr
when != input_free_device(x,...)
when != if (...) { ... input_free_device(x,...) ...}
if(...) { ... when != x = ra
when forall
when != input_free_device(x,...)
\(return <+...x...+>; \| return@p2...; \) }
@script:python@
p1 << r.p1;
p2 << r.p2;
@@
cocci.print_main("input_allocate_device",p1)
cocci.print_secs("input_free_device",p2)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
wMaxPacketSize are bEndpointAddress assigned but not used
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
we are interested only in isochronous in endpoints
so we can simplify the flow
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
reduce printouts of not necessary information
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add mei to Kconfig and Makefile in drivers/staging
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
code that open connection and invoke
heartbeats to the AMT Watchdog client/feature, if exists
Connect to WD Client, if exists Send Start WD Command.
Every 2 secs send heartbeats.
On System shutdown/suspends, send Stop WD command.
This is intermediate stage before moving this code to standalone watchdog
driver.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
define IOCTL_MEI_CONNECT_CLIENT and its associated structure
When the user wants to connect to a ME feature/client after
it open a file descriptor to the driver, he need to use Connect
IOCTL.
This IOCTL received a struct that contains a union of 2 other structs.
1st struct - Input Parameters:
UUID - a predefine unique that identify the ME feature, this
id per feature is constant all over the chipsets
and versions.
2nd struct Output Parameters:
MaxMessageLen - maximum message length that allowed
to be send to the feature
ProtocolVersion ME feature current protocol version.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
define the MEI protocol msg structs and
HW registers, also define the MEI internal status and struct
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Init driver list and queue, MEI Hardware reset flow,
init of driver specific host client.
MEI Init/reset flow:
- Ack all waiting interrupts
- Hardware reset flow (Set Reset Bit, Generate Interrupt, Clear Reset Bit
Generate Interrupt)
- Wait for ME Ready Bit (done in interrupt thread)
- Set ME Ready Bit (done in interrupt thread)
- Send Start request (done in interrupt thread)
- wait for answer
- Send Enumerate Clients request (done in interrupt thread)
- wait for answer
- Send Get Client property for each client request (done in interrupt thread)
- Wait for answers
- Init Done.
MEI Driver connect internally to 2 ME clients/features:
AMTHI and AMT watchdog.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>