rmmod has a little-used "-w" option, meaning that instead of failing if the
module is in use, it should block until the module becomes unused.
In this case, we don't need to use stop_machine: Max Krasnyansky
indicated that would be useful for SystemTap which loads/unloads new
modules frequently.
Cc: Max Krasnyansky <maxk@qualcomm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Linus found a logic bug: we ignore the version number in a module's
vermagic string if we have CONFIG_MODVERSIONS set, but modversions
also lets through a module with no __versions section for modprobe
--force (with tainting, but still).
We should only ignore the start of the vermagic string if the module
actually *has* crcs to check. Rather than (say) having an
entertaining hissy fit and creating a config option to work around the
buggy code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We allow missing __versions sections, because modprobe --force strips
it. It makes less sense to allow sections where there's no version
for a specific symbol the module uses, so disallow that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel module loader used to be much too happy to allow loading of
modules for the wrong kernel version by default. For example, if you
had MODVERSIONS enabled, but tried to load a module with no version
info, it would happily load it and taint the kernel - whether it was
likely to actually work or not!
Generally, such forced module loading should be considered a really
really bad idea, so make it conditional on a new config option
(MODULE_FORCE_LOAD), and make it default to off.
If somebody really wants to force module loads, that's their problem,
but we should not encourage it. Especially as it happened to me by
mistake (ie regular unversioned Fedora modules getting loaded) causing
lots of strange behavior.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide module unload callback. Required by the gcov profiling
infrastructure to keep track of profiling data structures.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make verify_export_symbols check the modules unused, unused_gpl and
gpl_future syms.
Inspired by Jan Beulich's fix, but table-driven.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Obvious typo, but I don't know of any modules with unused GPL exports,
and then it would take someone noticing that the version shouldn't
have matched in a dependent module.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
__find_symbol() has grown over time: there are now 5 different arrays
of symbols it traverses. It also shouldn't print out a warning on
some calls (ie. verify_symbol which simply checks for name clashes,
and __symbol_put which checks for bugs).
1) Rename to find_symbol: no need for underscores.
2) Use bool and add "warn" parameter to suppress warnings.
3) Make table-driven rather than open coded.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Return value convention of module's init functions is 0/-E. Sometimes,
e.g. during forward-porting mistakes happen and buggy module created,
where result of comparison "workqueue != NULL" is propagated all the way up
to sys_init_module. What happens is that some other module created
workqueue in question, our module created it again and module was
successfully loaded.
Or it could be some other bug.
Let's make such mistakes much more visible. In retrospective, such
messages would noticeably shorten some of my head-scratching sessions.
Note, that dump_stack() is just a way to get attention from user. Sample
message:
sys_init_module: 'foo'->init suspiciously returned 1, it should follow 0/-E convention
sys_init_module: loading module anyway...
Pid: 4223, comm: modprobe Not tainted 2.6.24-25f666300625d894ebe04bac2b4b3aadb907c861 #5
Call Trace:
[<ffffffff80254b05>] sys_init_module+0xe5/0x1d0
[<ffffffff8020b39b>] system_call_after_swapgs+0x7b/0x80
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit c9a3ba55 (module: wait for dependent modules doing init.) didn't quite
work because the waiter holds the module lock, meaning that the state of the
module it's waiting for cannot change.
Fortunately, it's fairly simple to update the state outside the lock and do
the wakeup.
Thanks to Jan Glauber for tracking this down and testing (qdio and qeth).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A change after 2.6.24 broke ndiswrapper by accidentally removing its
access to GPL-only symbols. Revert that change and add comments about
the reasons why ndiswrapper and driverloader are treated in a special
way.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Acked-by: Greg KH <gregkh@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jon Masters <jonathan@jonmasters.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thanks to Alexey for the testing and the fix of the fix.
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
RCU style multiple probes support for the Linux Kernel Markers. Common case
(one probe) is still fast and does not require dynamic allocation or a
supplementary pointer dereference on the fast path.
- Move preempt disable from the marker site to the callback.
Since we now have an internal callback, move the preempt disable/enable to the
callback instead of the marker site.
Since the callback change is done asynchronously (passing from a handler that
supports arguments to a handler that does not setup the arguments is no
arguments are passed), we can safely update it even if it is outside the
preempt disable section.
- Move probe arm to probe connection. Now, a connected probe is automatically
armed.
Remove MARK_MAX_FORMAT_LEN, unused.
This patch modifies the Linux Kernel Markers API : it removes the probe
"arm/disarm" and changes the probe function prototype : it now expects a
va_list * instead of a "...".
If we want to have more than one probe connected to a marker at a given
time (LTTng, or blktrace, ssytemtap) then we need this patch. Without it,
connecting a second probe handler to a marker will fail.
It allow us, for instance, to do interesting combinations :
Do standard tracing with LTTng and, eventually, to compute statistics
with SystemTAP, or to have a special trigger on an event that would call
a systemtap script which would stop flight recorder tracing.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Mason <mmlnx@us.ibm.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: David Smith <dsmith@redhat.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
module.c should not define linker variables on its own. We have an include
file for that.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The module subsystem cannot handle symbols that are zero. If symbols are
present that have a zero value then the module resolver prints out a
message that these symbols are unresolved.
[akinobu.mita@gmail.com: fix __find_symbl() error checks]
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Kay Sievers <kay.sievers@vrfy.org
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When trying to load a module with the same name as a built-in one, a
scary kobject backtrace comes up. Prevent that from checking for this
condition and warning the user as to what exactly is going on.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The struct module taints member is supposed to store per-module taint
data. The kernel knows about certain specific external modules that will
taint the kernel, such as ndiswrapper. Use of ndiswrapper possibly
should set the per-module taint in addition to the global kernel
taint flag, unless we're arguing not because wrapper module itself
is not what actually causes the kernel to be tainted as such?
Signed-off-by: Jon Masters <jcm@jonmasters.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
module_address_lookup releases preemption then returns a pointer into
the module space. The only user (kallsyms) copies the result, so just
do that under the preempt disable.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we put the module in the linked list *before* calling into to, we
get the module name and functions in the OOPS (is_module_address can
find the module). It also helps lockdep in a similar way.
Acked-and-tested-by: Joern Engel <joern@lazybastard.org>
Tested-by: Erez Zadok <ezk@cs.sunysb.edu>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There have been reports of modules failing to load because the modules
they depend on are still loading. This changes the modules to wait
for a reasonable length of time in that case. We time out eventually,
because there can be module loops or broken modules.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Based on a suggestion from Andi:
In various cases, the unload of a module may leave some bad state around
that causes a kernel crash AFTER a module is unloaded; and it's then hard
to find which module caused that.
This patch tracks the last unloaded module, and prints this as part of the
module list in the oops trace.
Right now, only the last 1 module is tracked; I expect that this is enough
for the vast majority of cases where this information matters; if it turns
out that tracking more is important, we can always extend it to that.
[ mingo@elte.hu: build fix ]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's rather common that an oops/WARN_ON/BUG happens during the load or
unload of a module. Unfortunatly, it's not always easy to see directly
which module is being loaded/unloaded from the oops itself. Worse,
it's not even always possible to ask the bug reporter, since there
are so many components (udev etc) that auto-load modules that there's
a good chance that even the reporter doesn't know which module this is.
This patch extends the existing "show if it's tainting" print code,
which is used as part of printing the modules in the oops/BUG/WARN_ON
to include a "+" for "being loaded" and a "-" for "being unloaded".
As a result this extension, the "taint_flags()" function gets renamed to
"module_flags()" (and takes a module struct as argument, not a taint
flags int).
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This converts the code to use the new kobject functions, cleaning up the
logic in doing so.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sysfs symlinks now require fully registered kobjects as a target,
otherwise the call to create a symlink will fail. Here we register
the kobject before we request the symlink in the holders directory.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Tejun Heo <teheo@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The module driver specific code should belong in the driver core, not in
the kernel/ directory. So move this code. This is done in preparation
for some struct device_driver rework that should be confined to the
driver core code only.
This also lets us keep from exporting these functions, as no external
code should ever be calling it.
Thanks to Andrew Morton for the !CONFIG_MODULES fix.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dynamically create the kset instead of declaring it statically. We also
rename module_subsys to module_kset to catch all users of the variable.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kobject_create_and_add is the same as kobject_add_dir, so drop
kobject_add_dir.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We don't need a "default" ktype for a kset. We should set this
explicitly every time for each kset. This change is needed so that we
can make ksets dynamic, and cleans up one of the odd, undocumented
assumption that the kset/kobject/ktype model has.
This patch is based on a lot of help from Kay Sievers.
Nasty bug in the block code was found by Dave Young
<hidave.darkstar@gmail.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kyle McMartin reports sysrq_timer_list_show() can hit the module mutex
from hard interrupt context. These paths don't need to though, since we
long ago changed all the module list manipulation to occur via
stop_machine().
Disabling preemption is enough.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The marker activation functions sits in kernel/marker.c. A hash table is used
to keep track of the registered probes and armed markers, so the markers
within a newly loaded module that should be active can be activated at module
load time.
marker_query has been removed. marker_get_first, marker_get_next and
marker_release should be used as iterators on the markers.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Mike Mason <mmlnx@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
load_module() returns zero when mod_sysfs_init() fails, then the module
loading will succeed accidentally.
This patch makes load_module() return error correctly in that case.
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds the /sys/module/<name>/notes/ magic directory, which has a
file for each allocated SHT_NOTE section that appears in <name>.ko. This
is the counterpart for each module of /sys/kernel/notes for vmlinux.
Reading this delivers the contents of the module's SHT_NOTE sections. This
lets userland easily glean any detailed information about that module's
build that was stored there at compile time (e.g. by ld --build-id).
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk points out that "unsafe" was used to mark modules touched by
the deprecated MOD_INC_USE_COUNT interface, which has long gone. It's time
to remove the member from the module structure, as well.
If you want a module which can't unload, don't register an exit function.
(Vlad Yasevich says SCTP is now safe to unload, so just remove the
__unsafe there).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Cc: Sridhar Samudrala <sri@us.ibm.com>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KSYM_NAME_LEN is peculiar in that it does not include the space for the
trailing '\0', forcing all users to use KSYM_NAME_LEN + 1 when allocating
buffer. This is nonsense and error-prone. Moreover, when the caller
forgets that it's very likely to subtly bite back by corrupting the stack
because the last position of the buffer is always cleared to zero.
This patch increments KSYM_NAME_LEN by one and updates code accordingly.
* off-by-one bug in asm-powerpc/kprobes.h::kprobe_lookup_name() macro
is fixed.
* Where MODULE_NAME_LEN and KSYM_NAME_LEN were used together,
MODULE_NAME_LEN was treated as if it didn't include space for the
trailing '\0'. Fix it.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Paulo Marques <pmarques@grupopie.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now we always use stop_machine for module insertion or deletion, we no
longer need the modlist_lock: merely disabling preemption is sufficient to
block against list manipulation. This avoids deadlock on OOPSen where we
can potentially grab the lock twice.
Bug: 8695
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tobias Oed <tobiasoed@hotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here there is not need even in .show callback altering. The original code
passes list_head in *v.
Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sysfs is now completely out of driver/module lifetime game. After
deletion, a sysfs node doesn't access anything outside sysfs proper,
so there's no reason to hold onto the attribute owners. Note that
often the wrong modules were accounted for as owners leading to
accessing removed modules.
This patch kills now unnecessary attribute->owner. Note that with
this change, userland holding a sysfs node does not prevent the
backing module from being unloaded.
For more info regarding lifetime rule cleanup, please read the
following message.
http://article.gmane.org/gmane.linux.kernel/510293
(tweaked by Greg to not delete the field just yet, to make it easier to
merge things properly.)
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>