Commit Graph

4145 Commits

Author SHA1 Message Date
Linus Torvalds e6d69a60b7 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine changes from Vinod Koul:
 "This brings for slave dmaengine:

   - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as
     dmaengine can only transfer and not verify validaty of dma
     transfers

   - Bunch of fixes across drivers:

      - cppi41 driver fixes from Daniel

      - 8 channel freescale dma engine support and updated bindings from
        Hongbo

      - msx-dma fixes and cleanup by Markus

   - DMAengine updates from Dan:

      - Bartlomiej and Dan finalized a rework of the dma address unmap
        implementation.

      - In the course of testing 1/ a collection of enhancements to
        dmatest fell out.  Notably basic performance statistics, and
        fixed / enhanced test control through new module parameters
        'run', 'wait', 'noverify', and 'verbose'.  Thanks to Andriy and
        Linus [Walleij] for their review.

      - Testing the raid related corner cases of 1/ triggered bugs in
        the recently added 16-source operation support in the ioatdma
        driver.

      - Some minor fixes / cleanups to mv_xor and ioatdma"

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits)
  dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers
  dma: mv_xor: Remove unneeded NULL address check
  ioat: fix ioat3_irq_reinit
  ioat: kill msix_single_vector support
  raid6test: add new corner case for ioatdma driver
  ioatdma: clean up sed pool kmem_cache
  ioatdma: fix selection of 16 vs 8 source path
  ioatdma: fix sed pool selection
  ioatdma: Fix bug in selftest after removal of DMA_MEMSET.
  dmatest: verbose mode
  dmatest: convert to dmaengine_unmap_data
  dmatest: add a 'wait' parameter
  dmatest: add basic performance metrics
  dmatest: add support for skipping verification and random data setup
  dmatest: use pseudo random numbers
  dmatest: support xor-only, or pq-only channels in tests
  dmatest: restore ability to start test at module load and init
  dmatest: cleanup redundant "dmatest: " prefixes
  dmatest: replace stored results mechanism, with uniform messages
  Revert "dmatest: append verify result to results"
  ...
2013-11-20 13:20:24 -08:00
Vinod Koul df12a3178d Merge commit 'dmaengine-3.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine
Pull dmaengine changes from Dan

1/ Bartlomiej and Dan finalized a rework of the dma address unmap
   implementation.

2/ In the course of testing 1/ a collection of enhancements to dmatest
   fell out.  Notably basic performance statistics, and fixed / enhanced
   test control through new module parameters 'run', 'wait', 'noverify',
   and 'verbose'.  Thanks to Andriy and Linus for their review.

3/ Testing the raid related corner cases of 1/ triggered bugs in the
   recently added 16-source operation support in the ioatdma driver.

4/ Some minor fixes / cleanups to mv_xor and ioatdma.

Conflicts:
	drivers/dma/dmatest.c

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-16 12:02:36 +05:30
Linus Torvalds 9073e1a804 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual earth-shaking, news-breaking, rocket science pile from
  trivial.git"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
  doc: usb: Fix typo in Documentation/usb/gadget_configs.txt
  doc: add missing files to timers/00-INDEX
  timekeeping: Fix some trivial typos in comments
  mm: Fix some trivial typos in comments
  irq: Fix some trivial typos in comments
  NUMA: fix typos in Kconfig help text
  mm: update 00-INDEX
  doc: Documentation/DMA-attributes.txt fix typo
  DRM: comment: `halve' -> `half'
  Docs: Kconfig: `devlopers' -> `developers'
  doc: typo on word accounting in kprobes.c in mutliple architectures
  treewide: fix "usefull" typo
  treewide: fix "distingush" typo
  mm/Kconfig: Grammar s/an/a/
  kexec: Typo s/the/then/
  Documentation/kvm: Update cpuid documentation for steal time and pv eoi
  treewide: Fix common typo in "identify"
  __page_to_pfn: Fix typo in comment
  Correct some typos for word frequency
  clk: fixed-factor: Fix a trivial typo
  ...
2013-11-15 16:47:22 -08:00
Wolfram Sang 16735d022f tree-wide: use reinit_completion instead of INIT_COMPLETION
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.

[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:21 +09:00
Bartlomiej Zolnierkiewicz 0776ae7b89 dmaengine: remove DMA unmap flags
Remove no longer needed DMA unmap flags:
- DMA_COMPL_SKIP_SRC_UNMAP
- DMA_COMPL_SKIP_DEST_UNMAP
- DMA_COMPL_SRC_UNMAP_SINGLE
- DMA_COMPL_DEST_UNMAP_SINGLE

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jon Mason <jon.mason@intel.com>
Acked-by: Mark Brown <broonie@linaro.org>
[djbw: clean up straggling skip unmap flags in ntb]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:38 -08:00
Linus Torvalds 82cb6acea4 MTD merge for 3.13
* Unify some compile-time differences so that we have fewer uses of
    #ifdef CONFIG_OF in atmel_nand
  * Other general cleanups (removing unused functions, options, variables,
    fields; use correct interfaces)
  * Fix BUG() for new odd-sized NAND, which report non-power-of-2 dimensions via
    ONFI
  * Miscellaneous driver fixes (SPI NOR flash; BCM47xx NAND flash; etc.)
  * Improve differentiation between SLC and MLC NAND -- this clarifies an ABI
    issue regarding the MTD "type" (in sysfs and in ioctl(MEMGETINFO)), where
    the MTD_MLCNANDFLASH type was present but inconsistently used
  * Extend GPMI NAND to support multi-chip-select NAND for some platforms
  * Many improvements to the OMAP2/3 NAND driver, including an expanded DT
    binding to bring us closer to mainline support for some OMAP systems
  * Fix a deadlock in the error path of the Atmel NAND driver probe
  * Correct the error codes from MTD mmap() to conform to POSIX and the Linux
    Programmer's Manual. This is an acknowledged change in the MTD ABI, but I
    can't imagine somebody relying on the non-standard -ENOSYS error code
    specifically. Am I just being unimaginative? :)
  * Fix a few important GPMI NAND bugs (one regression from 3.12 and one
    long-standing race condition)
  * More? Read the log!
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSgzYRAAoJEFySrpd9RFgtv8EP/3ZIS1w4fHyWafVSdgVFGR0Y
 urlVDhg7iBauh9admN9xxBz6CYRwhjby8GnN87Q1qzu95Xp63RVx31nNfdBW3DGd
 92vSyskijYJcUtanBxYqGp1i3EbQcpF4mumqxnre3C4KTLNije41t/wNVqnXAstU
 DWho2iymZdkweKJ0DqBA7WF4l/YscdFyNDanO9JWiwII05Rh3Acv7FPMFm3Clblw
 Nvfwzgp4XycYMeIQtkmQgQ3GgeWtxPgQwqMofn97MVH4zeTsmUP317ohIMukLGJD
 db33J2xBdrIbk9P4D3RvjOCYyAyonu9y6/p+B1Vmj+R4CAUvQOIljhklHFoT3UZW
 OzUHPxB6T0+NZyQ/5IRQIYH9As++vdb/bzsUXm/cXceI4o4I0QCPy/8adifakBOF
 IUX9/BCdUOfKXvdOXY5dXMR2sY1IBg/1WfI+qcAoITsS/EVrUTrOcfSLyGqF0ERU
 c7mAzXiyp4D51x66/QnfJ4aJjlioQSoa3mK1j4fXqH08YB5Zclpz938Bo1AO3lWy
 /n+NYSbeXJoi4rVkNawjrRVs+0OTby2XQ5OqBlUMH6f30fqjUefPm66ZBMhbxzYu
 5QFDctUbnHCyAPpOtM/WR3/NOkIqVhQl1331A+dG2TzLK0vTHs+kbt/YmIITpjI+
 yn70XJGhk1F4gy8zhD+V
 =z5qO
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd

Pull MTD changes from Brian Norris:
 - Unify some compile-time differences so that we have fewer uses of
   #ifdef CONFIG_OF in atmel_nand
 - Other general cleanups (removing unused functions, options,
   variables, fields; use correct interfaces)
 - Fix BUG() for new odd-sized NAND, which report non-power-of-2
   dimensions via ONFI
 - Miscellaneous driver fixes (SPI NOR flash; BCM47xx NAND flash; etc.)
 - Improve differentiation between SLC and MLC NAND -- this clarifies an
   ABI issue regarding the MTD "type" (in sysfs and in the MEMGETINFO
   ioctl), where the MTD_MLCNANDFLASH type was present but
   inconsistently used
 - Extend GPMI NAND to support multi-chip-select NAND for some platforms
 - Many improvements to the OMAP2/3 NAND driver, including an expanded
   DT binding to bring us closer to mainline support for some OMAP
   systems
 - Fix a deadlock in the error path of the Atmel NAND driver probe
 - Correct the error codes from MTD mmap() to conform to POSIX and the
   Linux Programmer's Manual.  This is an acknowledged change in the MTD
   ABI, but I can't imagine somebody relying on the non-standard -ENOSYS
   error code specifically.  Am I just being unimaginative? :)
 - Fix a few important GPMI NAND bugs (one regression from 3.12 and one
   long-standing race condition)
 - More? Read the log!

* tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd: (98 commits)
  mtd: gpmi: fix the NULL pointer
  mtd: gpmi: fix kernel BUG due to racing DMA operations
  mtd: mtdchar: return expected errors on mmap() call
  mtd: gpmi: only scan two chips for imx6
  mtd: gpmi: Use devm_kzalloc()
  mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected
  mtd: nand: use a local variable to simplify the nand_scan_tail
  mtd: nand: remove deprecated IRQF_DISABLED
  mtd: dataflash: Say if we find a device we don't support
  mtd: nand: omap: fix error return code in omap_nand_probe()
  mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES
  mtd: m25p80: fixup device removal failure path
  mtd: mxc_nand: Include linux/of.h header
  mtd: remove duplicated include from mtdcore.c
  mtd: m25p80: add support for Macronix mx25l3255e
  mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
  mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
  mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
  mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  ...
2013-11-14 12:31:43 +09:00
Linus Torvalds 9bc9ccd7db Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "All kinds of stuff this time around; some more notable parts:

   - RCU'd vfsmounts handling
   - new primitives for coredump handling
   - files_lock is gone
   - Bruce's delegations handling series
   - exportfs fixes

  plus misc stuff all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits)
  ecryptfs: ->f_op is never NULL
  locks: break delegations on any attribute modification
  locks: break delegations on link
  locks: break delegations on rename
  locks: helper functions for delegation breaking
  locks: break delegations on unlink
  namei: minor vfs_unlink cleanup
  locks: implement delegations
  locks: introduce new FL_DELEG lock flag
  vfs: take i_mutex on renamed file
  vfs: rename I_MUTEX_QUOTA now that it's not used for quotas
  vfs: don't use PARENT/CHILD lock classes for non-directories
  vfs: pull ext4's double-i_mutex-locking into common code
  exportfs: fix quadratic behavior in filehandle lookup
  exportfs: better variable name
  exportfs: move most of reconnect_path to helper function
  exportfs: eliminate unused "noprogress" counter
  exportfs: stop retrying once we race with rename/remove
  exportfs: clear DISCONNECTED on all parents sooner
  exportfs: more detailed comment for path_reconnect
  ...
2013-11-13 15:34:18 +09:00
Linus Torvalds 39222c82f7 A bunch of fixes for the fastmap feature, which is still new and rather
experimental. It looks like it starts getting more users. No significant
 changes for the "classical" non-fastmap UBI.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSgh0zAAoJECmIfjd9wqK0/dYQAKakcfMmk8eudJJL9LZRltsQ
 d6tSZq2M7vKK0TlOfG3JEZa//muY6X/UAANWo/mNLOp1WGhlTkFjMi7PSc+8REGC
 /ASln/Hswz8FAWFfL/rua0Kn3QSeZLPi4azueqqvPVjEswK7gGyTFMmiIqVaNMTY
 f6RwH17U7TZZeOXw1Lc3HF3GMtIiEZyYGX4WZXj0VIs087G9rntOD5ZRNsFMDaDr
 mVnOYKkJzsVGb503D3LJfZpkn140HQtsQM0txYRalBf/BCEvGF9X3aKfXd5qbTKp
 6qLkP+vT9zlc+05ajDpIvw5bT/I7LDnUZ3ciFLFBxuTlDA0S50vvdjlBm8B0HRoa
 YxMHPJY1uKj/fE2dZQsea3VUCSi09QVJKq1oOk5fqF9BjF3kbmBYCMb/czSTcQ70
 7YVksPnjGwyd2VXL1PaeUoNov84FWoPgcLZ8/SrElcXrH0W5CHQCvbv8bAH5+GUZ
 o9xRvCMmldv5/2G4/zvHsrDvSfMBQYaiJ8QChgvHLw7ghcUjPKdLlgL/FWCpw5Pp
 Ewzm3px5xK2ZX3hAdr2odiW9omB3RdZdiSgobqBf7evW6Xw+xMtG4UZr4THPgdJT
 9i8vbwkpXWFfB21QbazPpPXdUOHw4UlvbAmGhqZHQPTuZgf9e6GkV4u9hufoPd7E
 TQ60qx/XnnbFJZEp0qmg
 =P8sc
 -----END PGP SIGNATURE-----

Merge tag 'upstream-3.13-rc1' of git://git.infradead.org/linux-ubi

Pull UBI changes from Artem Bityutskiy:
 "A bunch of fixes for the fastmap feature, which is still new and
  rather experimental.  It looks like it starts getting more users.

  No significant changes for the "classical" non-fastmap UBI"

* tag 'upstream-3.13-rc1' of git://git.infradead.org/linux-ubi:
  UBI: Add some asserts to ubi_attach_fastmap()
  UBI: Fix memory leak in ubi_attach_fastmap() error path
  UBI: simplify image sequence test
  UBI: fastmap: fix backward compatibility with image_seq
  UBI: Call scan_all() with correct offset in error case
  UBI: Fix error path in scan_pool()
  UBI: fix refill_wl_user_pool()
2013-11-13 15:29:38 +09:00
Huang Shijie 885d71e583 mtd: gpmi: fix the NULL pointer
The imx23 board will check the fingerprint, so it will call the
mx23_check_transcription_stamp. This function will use @chip->buffers->databuf
as its buffer which is allocated in the nand_scan_tail().

Unfortunately, the mx23_check_transcription_stamp is called before the
nand_scan_tail(). So we will meet a NULL pointer bug:

--------------------------------------------------------------------
[    1.150000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd7 (Samsung NAND 4GiB 3,3V 8-bit), 4096MiB, page size: 4096, OOB size: 8
[    1.160000] Unable to handle kernel NULL pointer dereference at virtual address 000005d0
[    1.170000] pgd = c0004000
[    1.170000] [000005d0] *pgd=00000000
[    1.180000] Internal error: Oops: 5 [#1] ARM
[    1.180000] Modules linked in:
[    1.180000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0 #89
[    1.180000] task: c7440000 ti: c743a000 task.ti: c743a000
[    1.180000] PC is at memcmp+0x10/0x54
[    1.180000] LR is at gpmi_nand_probe+0x42c/0x894
[    1.180000] pc : [<c025fcb0>]    lr : [<c02f6a68>]    psr: 20000053
[    1.180000] sp : c743be2c  ip : 600000d3  fp : ffffffff
[    1.180000] r10: 000005d0  r9 : c02f5f08  r8 : 00000000
[    1.180000] r7 : c75858a8  r6 : c75858a8  r5 : c7585b18  r4 : c7585800
[    1.180000] r3 : 000005d0  r2 : 00000004  r1 : c05c33e4  r0 : 000005d0
[    1.180000] Flags: nzCv  IRQs on  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
[    1.180000] Control: 0005317f  Table: 40004000  DAC: 00000017
[    1.180000] Process swapper (pid: 1, stack limit = 0xc743a1c0)
--------------------------------------------------------------------

This patch rearrange the init procedure:
   Set the NAND_SKIP_BBTSCAN to skip the nand scan firstly, and after we
   set the proper settings, we will call the chip->scan_bbt() manually.

Cc: stable@vger.kernel.org # 3.12
Signed-off-by: Huang Shijie <b32955@freescale.com>
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-12 10:17:57 -08:00
Linus Torvalds 10d0c9705e DeviceTree updates for 3.13. This is a bit larger pull request than
usual for this cycle with lots of clean-up.
 
 - Cross arch clean-up and consolidation of early DT scanning code.
 - Clean-up and removal of arch prom.h headers. Makes arch specific
   prom.h optional on all but Sparc.
 - Addition of interrupts-extended property for devices connected to
   multiple interrupt controllers.
 - Refactoring of DT interrupt parsing code in preparation for deferred
   probe of interrupts.
 - ARM cpu and cpu topology bindings documentation.
 - Various DT vendor binding documentation updates.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJSgPQ4AAoJEMhvYp4jgsXif28H/1WkrXq5+lCFQZF8nbYdE2h0
 R8PsfiJJmAl6/wFgQTsRel+ScMk2hiP08uTyqf2RLnB1v87gCF7MKVaLOdONfUDi
 huXbcQGWCmZv0tbBIklxJe3+X3FIJch4gnyUvPudD1m8a0R0LxWXH/NhdTSFyB20
 PNjhN/IzoN40X1PSAhfB5ndWnoxXBoehV/IVHVDU42vkPVbVTyGAw5qJzHW8CLyN
 2oGTOalOO4ffQ7dIkBEQfj0mrgGcODToPdDvUQyyGZjYK2FY2sGrjyquir6SDcNa
 Q4gwatHTu0ygXpyphjtQf5tc3ZCejJ/F0s3olOAS1ahKGfe01fehtwPRROQnCK8=
 =GCbY
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "DeviceTree updates for 3.13.  This is a bit larger pull request than
  usual for this cycle with lots of clean-up.

   - Cross arch clean-up and consolidation of early DT scanning code.
   - Clean-up and removal of arch prom.h headers.  Makes arch specific
     prom.h optional on all but Sparc.
   - Addition of interrupts-extended property for devices connected to
     multiple interrupt controllers.
   - Refactoring of DT interrupt parsing code in preparation for
     deferred probe of interrupts.
   - ARM cpu and cpu topology bindings documentation.
   - Various DT vendor binding documentation updates"

* tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits)
  powerpc: add missing explicit OF includes for ppc
  dt/irq: add empty of_irq_count for !OF_IRQ
  dt: disable self-tests for !OF_IRQ
  of: irq: Fix interrupt-map entry matching
  MIPS: Netlogic: replace early_init_devtree() call
  of: Add Panasonic Corporation vendor prefix
  of: Add Chunghwa Picture Tubes Ltd. vendor prefix
  of: Add AU Optronics Corporation vendor prefix
  of/irq: Fix potential buffer overflow
  of/irq: Fix bug in interrupt parsing refactor.
  of: set dma_mask to point to coherent_dma_mask
  of: add vendor prefix for PHYTEC Messtechnik GmbH
  DT: sort vendor-prefixes.txt
  of: Add vendor prefix for Cadence
  of: Add empty for_each_available_child_of_node() macro definition
  arm/versatile: Fix versatile irq specifications.
  of/irq: create interrupts-extended property
  microblaze/pci: Drop PowerPC-ism from irq parsing
  of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code.
  of/irq: Use irq_of_parse_and_map()
  ...
2013-11-12 16:52:17 +09:00
Huang Shijie 7b3d2fb920 mtd: gpmi: fix kernel BUG due to racing DMA operations
[1] The gpmi uses the nand_command_lp to issue the commands to NAND chips.
    The gpmi issues a DMA operation with gpmi_cmd_ctrl when it handles
    a NAND_CMD_NONE control command. So when we read a page(NAND_CMD_READ0)
    from the NAND, we may send two DMA operations back-to-back.

    If we do not serialize the two DMA operations, we will meet a bug when

    1.1) we enable CONFIG_DMA_API_DEBUG, CONFIG_DMADEVICES_DEBUG,
         and CONFIG_DEBUG_SG.

    1.2) Use the following commands in an UART console and a SSH console:
         cmd 1: while true;do dd if=/dev/mtd0 of=/dev/null;done
         cmd 1: while true;do dd if=/dev/mmcblk0 of=/dev/null;done

    The kernel log shows below:
    -----------------------------------------------------------------
    kernel BUG at lib/scatterlist.c:28!
    Unable to handle kernel NULL pointer dereference at virtual address 00000000
      .........................
    [<80044a0c>] (__bug+0x18/0x24) from [<80249b74>] (sg_next+0x48/0x4c)
    [<80249b74>] (sg_next+0x48/0x4c) from [<80255398>] (debug_dma_unmap_sg+0x170/0x1a4)
    [<80255398>] (debug_dma_unmap_sg+0x170/0x1a4) from [<8004af58>] (dma_unmap_sg+0x14/0x6c)
    [<8004af58>] (dma_unmap_sg+0x14/0x6c) from [<8027e594>] (mxs_dma_tasklet+0x18/0x1c)
    [<8027e594>] (mxs_dma_tasklet+0x18/0x1c) from [<8007d444>] (tasklet_action+0x114/0x164)
    -----------------------------------------------------------------

    1.3) Assume the two DMA operations is X (first) and Y (second).

         The root cause of the bug:
	   Assume process P issues DMA X, and sleep on the completion
	 @this->dma_done. X's tasklet callback is dma_irq_callback. It firstly
	 wake up the process sleeping on the completion @this->dma_done,
	 and then trid to unmap the scatterlist S. The waked process P will
	 issue Y in another ARM core. Y initializes S->sg_magic to zero
	 with sg_init_one(), while dma_irq_callback is unmapping S at the same
	 time.

	 See the diagram:

                   ARM core 0              |         ARM core 1
	 -------------------------------------------------------------
         (P issues DMA X, then sleep)  --> |
                                           |
         (X's tasklet wakes P)         --> |
                                           |
                                           | <-- (P begin to issue DMA Y)
                                           |
         (X's tasklet unmap the            |
      scatterlist S with dma_unmap_sg) --> | <-- (Y calls sg_init_one() to init
                                           |      scatterlist S)
                                           |

[2] This patch serialize both the X and Y in the following way:
     Unmap the DMA scatterlist S firstly, and wake up the process at the end
     of the DMA callback, in such a way, Y will be executed after X.

     After this patch:

                   ARM core 0              |         ARM core 1
	 -------------------------------------------------------------
         (P issues DMA X, then sleep)  --> |
                                           |
         (X's tasklet unmap the            |
      scatterlist S with dma_unmap_sg) --> |
                                           |
         (X's tasklet wakes P)         --> |
                                           |
                                           | <-- (P begin to issue DMA Y)
                                           |
                                           | <-- (Y calls sg_init_one() to init
                                           |     scatterlist S)
                                           |

Cc: stable@vger.kernel.org # 3.2
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-11 11:44:36 -08:00
Vladimir Zapolskiy b999593237 mtd: mtdchar: return expected errors on mmap() call
According both to POSIX.1-2008 and Linux Programmer's Manual mmap()
syscall shouldn't return undocumented ENOSYS, this change replaces
the errno with more appropriate ENODEV and EACCESS.

Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-11 11:18:15 -08:00
Huang Shijie 80bd33acda mtd: gpmi: only scan two chips for imx6
We cannot scan two chips for imx23 and imx28:
  imx23: the Ready-Busy1 line is not connected for some board.
  imx28: we do not set the pinctrl for Ready-Busy1

So we only scan two chips for imx6.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-11 11:18:15 -08:00
Rob Herring c11eede69b powerpc: add missing explicit OF includes for ppc
Commit b5b4bb3f6a (of: only include prom.h on sparc) removed implicit
includes of of_*.h headers by powerpc's prom.h. Some components were
missed in initial clean-up patch, so add the necessary includes to fix
powerpc builds.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-ide@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
2013-11-11 09:10:50 -06:00
Fabio Estevam edaf4d4aad mtd: gpmi: Use devm_kzalloc()
Using devm_kzalloc() can make the code simpler.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-07 10:37:32 -08:00
Josh Wu a749d13acd mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected
In the atmel driver probe function, the code shows like following:
  atmel_nand_probe(...) {
        ...

  err_nand_ioremap:
        platform_driver_unregister(&atmel_nand_nfc_driver);
        return res;
  }

If no nand flash detected, the driver probe function will goto
err_nand_ioremap label.
Then platform_driver_unregister() will be called. It will get the
lock of atmel_nand device since it is parent of nfc_device. The
problem is the lock is already hold by atmel_nand_probe itself.
So system will be in a dead lock.

This patch just simply removed to platform_driver_unregister() call.
When atmel_nand driver is quit the platform_driver_unregister() will
be called in atmel_nand_remove().

[Brian: the NAND platform probe really has no business
 registering/unregistering another driver; this fixes the deadlock, but
 we should follow up the likely racy behavior here with a better
 architecture]

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Cc: <stable@vger.kernel.org> # 3.12
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-07 10:16:21 -08:00
Rob Herring b5480950c6 Merge remote-tracking branch 'grant/devicetree/next' into for-next 2013-11-07 10:34:46 -06:00
Huang Shijie 97de79e02d mtd: nand: use a local variable to simplify the nand_scan_tail
There are too many "chip->ecc" in the nand_scan_tail() which makes the eyes
sore.

This patch uses a local variable "ecc" to replace the "chip->ecc" to
make the code more graceful.

Do the code change with "s/chip->ecc\./ecc->/g" in the nand_scan_tail,
and also change some lines by hand.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-07 00:08:56 -08:00
Michael Opdenacker b1eb234fb3 mtd: nand: remove deprecated IRQF_DISABLED
This patch proposes to remove the use of the IRQF_DISABLED flag

It's a NOOP since 2.6.35 and it will be removed one day.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-07 00:08:56 -08:00
Mark Brown cb85b7e7a0 mtd: dataflash: Say if we find a device we don't support
Ensure that the error message if we identify a flash we don't know how to
talk to is displayed on the console in order to aid diagnostics. While
we're at convert the message to use dev_info() rather than our hand rolled
version of it for consistency.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-07 00:08:55 -08:00
Wei Yongjun 9211439b8a mtd: nand: omap: fix error return code in omap_nand_probe()
Fix to return a negative error code from the error handling case instead
of 0, to more closely match the rest of this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:15 -08:00
Brian Norris 5961ad2cb4 mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES
Now that the last user of NAND_BBT_SCANALLPAGES has been removed, let's
kill this peculiar BBT feature flag.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-11-06 23:33:14 -08:00
Brian Norris 9650b9bec6 mtd: m25p80: fixup device removal failure path
Device removal should fail if MTD unregistration fails.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2013-11-06 23:33:14 -08:00
Sachin Kamat d367e37e00 mtd: mxc_nand: Include linux/of.h header
'of_match_ptr' is defined in linux/of.h. Include it explicitly to
avoid build breakage in the future.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:13 -08:00
Wei Yongjun ca5295f48b mtd: remove duplicated include from mtdcore.c
Remove duplicated include.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:12 -08:00
Brian Norris 5ff14821a3 mtd: m25p80: add support for Macronix mx25l3255e
A new 32Mbit SPI NOR flash from Macronix. Nothing special.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2013-11-06 23:33:12 -08:00
Pekon Gupta 90c9c955db mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
With OMAP NAND driver updates, selection of ecc-scheme:
*DT enabled kernel*
 	depends on ti,nand-ecc-opt and ti,elm-id DT bindings.
*Non DT enabled kernel*
	depends on elm_dev and ecc-scheme passed along with platform-data
	from board file.

So, selection of ecc-scheme (BCH8 or BCH4) from KConfig can be removed

Signed-off-by: Pekon Gupta <pekon@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:11 -08:00
Pekon Gupta 70ba6d71dd mtd: nand: omap: updated devm_xx for all resource allocation and free calls
"Managed Device Resource" or devm_xx calls takes care of automatic freeing
of the resource in case of:
- failure during driver probe
- failure during resource allocation
- detaching or unloading of driver module (rmmod)
Reference: Documentation/driver-model/devres.txt

Though OMAP NAND driver handles freeing of resource allocation in most of
the cases, but using devm_xx provides more clean and effortless approach
to handle all such cases.

- simplifies label for exiting probe during error
  s/out_release_mem_region/return_error

Signed-off-by: Pekon Gupta <pekon@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:11 -08:00
Pekon Gupta 32d42a855a mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
generic frame-work in mtd/nand/nand_bch.c is a wrapper above lib/bch.h which
encapsulates all control information specific to BCH ecc algorithm in software.
Thus this patch:
(1) replace omap specific implementations with equivalent wrapper in nand_bch.c
    so that generic code from nand_bch.c is re-used. like;
        omap3_correct_data_bch() -> nand_bch_correct_data()
        omap3_free_bch() -> nand_bch_free()
(2) replace direct calls to lib/bch.c with wrapper functions defined in nand_bch.c
	init_bch() -> nand_bch_init()

Signed-off-by: Pekon Gupta <pekon@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:10 -08:00
Pekon Gupta b491da7233 mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
In current implementation omap3_init_bch_tail() is a common function to
define ecc layout for different BCHx ecc schemes.This patch:
(1) removes omap3_init_bch_tail() and defines ecc layout for individual
    ecc-schemes along with populating their nand_chip->ecc data in
    omap_nand_probe(). This improves the readability and scalability of
    code for add new ecc schemes in future.
(2) removes 'struct nand_bbt_descr bb_descrip_flashbased' because default
    nand_bbt_descr in nand_bbt.c matches the same (.len=1 for x8 devices).
(3) add the check to see if NAND device has enough OOB/Spare bytes to
    store ECC signature of whole page, as defined by ecc-scheme.

Signed-off-by: Pekon Gupta <pekon@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:10 -08:00
Pekon Gupta a919e51161 mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
current implementation in omap3_init_bch() has some redundant code like:
(1) omap3_init_bch() re-probes the DT-binding to detect presence of ELM h/w
    engine on SoC. And based on that it selects implemetation of ecc-scheme.
    However, this is already done as part of GPMC DT parsing.
(2) As omap3_init_bch() serves as common function for configuring all types of
    BCHx ecc-schemes, so there are multiple levels of redudant if..then..else
    checks while populating nand_chip->ecc.

This patch make following changes to OMAP NAND driver:
(1) removes omap3_init_bch(): each ecc-scheme is individually configured in
    omap_nand_probe() there by removing redundant if..then..else checks.
(2) adds is_elm_present(): re-probing of ELM device via DT is not required as
    it's done in GPMC driver probe. Thus is_elm_present() just initializes ELM
    driver with NAND probe data, when ecc-scheme with h/w based error-detection
    is used.
(3) separates out configuration of different flavours of "BCH4" and "BCH8"
    ecc-schemes as given in below table
(4) conditionally compiles callbacks implementations of ecc.hwctl(),
    ecc.calculate(), ecc.correct() to avoid warning of un-used functions.

+---------------------------------------+---------------+---------------+
| ECC scheme                            |ECC calculation|Error detection|
+---------------------------------------+---------------+---------------+
|OMAP_ECC_HAM1_CODE_HW                  |H/W (GPMC)     |S/W            |
+---------------------------------------+---------------+---------------+
|OMAP_ECC_BCH4_CODE_HW_DETECTION_SW     |H/W (GPMC)     |S/W (lib/bch.c)|
| (needs CONFIG_MTD_NAND_ECC_BCH)       |               |               |
|                                       |               |               |
|OMAP_ECC_BCH4_CODE_HW                  |H/W (GPMC)     |H/W (ELM)      |
| (needs CONFIG_MTD_NAND_OMAP_BCH &&    |               |               |
|        ti,elm-id)                     |               |               |
+---------------------------------------+---------------+---------------+
|OMAP_ECC_BCH8_CODE_HW_DETECTION_SW     |H/W (GPMC)     |S/W (lib/bch.c)|
| (needs CONFIG_MTD_NAND_ECC_BCH)       |               |               |
|                                       |               |               |
|OMAP_ECC_BCH8_CODE_HW                  |H/W (GPMC)     |H/W (ELM)      |
| (needs CONFIG_MTD_NAND_OMAP_BCH &&    |               |               |
|        ti,elm-id)                     |               |               |
+---------------------------------------+---------------+---------------+

- 'CONFIG_MTD_NAND_ECC_BCH' is generic KConfig required to build lib/bch.c
    which is required for ECC error detection done in software.
    (mainly used for legacy platforms which do not have on-chip ELM engine)

- 'CONFIG_MTD_NAND_OMAP_BCH' is OMAP specific Kconfig to detemine presence
    on ELM h/w engine on SoC.

Signed-off-by: Pekon Gupta <pekon@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:09 -08:00
Pekon Gupta f18befb57b mtd: nand: omap: use DT specified bus-width only for scanning NAND device
This patch:
- calls nand_scan_ident() using bus-width as passed by DT
- removes double calls to nand_scan_ident(), in case first call fails
  then omap_nand_probe just returns error.

Signed-off-by: Pekon Gupta <pekon@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:08 -08:00
Pekon Gupta 633deb58e1 mtd: nand: omap: cleanup: replace local references with generic framework names
This patch updates following in omap_nand_probe() and omap_nand_remove()
- replaces "info->nand" with "nand_chip" (struct nand_chip *nand_chip)
- replaces "info->mtd" with "mtd" (struct mtd_info *mtd)
- white-space and formatting cleanup

Signed-off-by: Pekon Gupta <pekon@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:08 -08:00
Pekon Gupta c66d039197 mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes
OMAP NAND driver currently supports multiple flavours of 1-bit Hamming
ecc-scheme, like:
- OMAP_ECC_HAMMING_CODE_DEFAULT
	1-bit hamming ecc code using software library
- OMAP_ECC_HAMMING_CODE_HW
	1-bit hamming ecc-code using GPMC h/w engine
- OMAP_ECC_HAMMING_CODE_HW_ROMCODE
	1-bit hamming ecc-code using GPMC h/w engin with ecc-layout compatible
	to ROM code.

This patch combines above multiple ecc-schemes into single implementation:
- OMAP_ECC_HAM1_CODE_HW
	1-bit hamming ecc-code using GPMC h/w engine with ROM-code compatible
	ecc-layout.

Signed-off-by: Pekon Gupta <pekon@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:07 -08:00
Brian Norris dc525ff470 mtd: m25p80: remove 'disabled' device check
It seems like the following commit was never necessary

    commit 5f94913795
    Author: Shaohui Xie <Shaohui.Xie@freescale.com>
    Date:   Fri Oct 14 15:49:00 2011 +0800

        mtd: m25p80: don't probe device which has status of 'disabled'

because it duplicates the code in of_platform_device_create_pdata()
which ensures that 'disabled' nodes are never instantiated.

Also, drop the __maybe_unused.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Sourav Poddar <sourav.poddar@ti.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: <devicetree@vger.kernel.org>
2013-11-06 23:33:06 -08:00
Brian Norris ddba7c5ad7 mtd: m25p80: remove M25PXX_USE_FAST_READ Kconfig
Remove the compile-time option for FAST_READ, since we have run-time
support for detecting it. This refactors the logic for enabling
fast-read, such that for DT-enabled devices, we honor the
"m25p,fast-read" property but for non-DT devices, we default to using
FAST_READ whenever the flash device supports it.

Normal READ and FAST_READ differ only in the following:

  * FAST_READ supports SPI higher clock frequencies [1]

  * number of dummy cycles; FAST_READ requires 8 dummy cycles (whereas
    READ requires 0) to allow the flash sufficient setup time, even when
    running at higher clock speeds

Thus, for flash chips which support FAST_READ, there is otherwise no
limiting reason why we cannot use the FAST_READ opcode instead of READ.
It simply allows the SPI controller to run at higher clock rates. So
theoretically, nobody should be needing the compile-time option anyway.

  [1] I have a Spansion S25FL128S datasheet which says:

    "The maximum operating clock frequency for the READ command is 50
    MHz."

  And:

    "The maximum operating clock frequency for FAST READ command is 133
    MHz."

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:06 -08:00
Brian Norris 6e5d9bda27 mtd: m25p80: re-align ID entries
No change in the table data.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Sourav Poddar <sourav.poddar@ti.com>
2013-11-06 23:33:05 -08:00
Brian Norris 1a874e9101 mtd: m25p80: remove obsolete FIXME
The FIXME and NOTE have already been fixed (we have FAST_READ support).

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Sourav Poddar <sourav.poddar@ti.com>
Acked-by: Marek Vasut <marex@denx.de>
2013-11-06 23:33:04 -08:00
Brian Norris 778d226a14 mtd: m25p80: fix allocation size
This patch fixes two memory errors:

1. During a probe failure (in mtd_device_parse_register?) the command
   buffer would not be freed.

2. The command buffer's size is determined based on the 'fast_read'
   boolean, but the assignment of fast_read is made after this
   allocation. Thus, the buffer may be allocated "too small".

To fix the first, just switch to the devres version of kzalloc.

To fix the second, increase MAX_CMD_SIZE unconditionally. It's not worth
saving a byte to fiddle around with the conditions here.

This problem was reported by Yuhang Wang a while back.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reported-by: Yuhang Wang <wangyuhang2014@gmail.com>
Reviewed-by: Sourav Poddar <sourav.poddar@ti.com>
Cc: <stable@vger.kernel.org>
2013-11-06 23:33:04 -08:00
Huang Shijie 7caa4fd290 mtd: gpmi: imx6: fix the wrong method for checking ready/busy
In the imx6, all the ready/busy pins are binding togeter.
So we should always check the ready/busy pin of the chip 0.

In the other word, when the CS1 is enabled, we should also check the
ready/busy of chip 0; if we check the ready/busy of chip 1,
we will get the wrong result.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:03 -08:00
Huang Shijie a5370e9ed5 mtd: gpmi: scan two nand chips
Some nand chip has two DIEs in a single chip, such as Micron MT29F32G08QAA.
Each die has its own chip select pin, so this chip acts as two nand
chips.

If we only scan one chip, we may find that we only get 2G for this chip,
but in actually, this chip's size is 4G.

So scan two chips by default.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:03 -08:00
Huang Shijie a7c12d016a mtd: gpmi: use DMA channel 0 for all the nand chips
We only have one DMA channel : the channel 0.
Use DMA channel 0 to access all the nand chips.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:02 -08:00
Huang Shijie d159d8b707 mtd: gpmi: decouple the chip select from the DMA channel
Decouple the chip select from the DMA channel, we use the DMA channel 0
to accecc all the nand devices.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:01 -08:00
Prabhakar Kushwaha 4af9874916 driver/mtd/ifc: Read Status while programming NAND flash
as per controller description,
  "While programming a NAND flash, status read should never skipped.
   Because it may happen that a new command is issued to the NAND Flash,
   even when the device has not yet finished processing the previous request.
   This may result in unpredictable behaviour."

IFC controller never polls for R/B signal after command send. It just return
control to software. This behaviour may not occur with NAND flash access.
because new commands are sent after polling R/B signal. But it may happen
in scenario where GPCM-ASIC and NAND flash device are working simultaneously.

Update the controller driver to take care of this requirement

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:01 -08:00
Prabhakar Kushwaha ebff90b288 driver/mtd/IFC: Add support of 8K page size NAND flash
Current IFC driver supports till 4K page size NAND flash.
Add support of 8K Page size NAND flash
  - Add nand_ecclayout for 4 bit & 8 bit ecc
  - Defines constants
  - also fix ecc.strength for 8bit ecc of 8K page size NAND

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:00 -08:00
Ezequiel Garcia f83c3838b9 mtd: Move major number definitions to major.h
This patch moves the char and block major number definitions
to major.h to be with the rest of the major numbers.
While doing this, include major.h in the files that need it.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:32:59 -08:00
Rafał Miłecki 33094c736c mtd: bcm47xxpart: detect "factory" partition
A new type of partition with magic FCTY was found on Huawei E970:
46 43 54 59 4b 51 37 4e  41 42 31 38 41 32 39 30  |FCTYKQ7NAB18A290|

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:32:58 -08:00
Rafał Miłecki 020c6bcfbe mtd: bcm47xxpart: detect block aligned Squashfs partition
Most of the bcm47xx devices use TRX format for storing kernel and some
partition like Squashfs or JFFS2. This is pretty flexible solution, CFE
(the bootloader) just writes (and later boots) TRX at some hardcoded
place and paritions can vary in the size.

However some devices don't use TRX format. Very recently we have
discovered ZTE H218N that has kernel and rootfs partitions at some
"random" places.

This patch allows Linux find a rootfs partition after installing custom
image with a CFE bootloader.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:32:58 -08:00
Hauke Mehrtens 99b1d1887f mtd: bcm47xxpart: handle malloc failures
Handle return NULL in malloc.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:32:57 -08:00
Sachin Kamat 7e3019e364 mtd: bcm47xxnflash: Use devm_kzalloc
devm_kzalloc is device managed and simplifies the code.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:32:56 -08:00