Commit Graph

29 Commits

Author SHA1 Message Date
Arnd Bergmann a0e157afd0 ARM: s3c64xx: prepare initcalls for multiplatform
In a multiplatform kernel, each initcall is run regardless
of the platform it is meant for, so it must not attempt to
access SoC-specific registers.

This adds 'if (soc_is_s3c64xx)' to all initcalls that are
specific to the s3c64xx platform, to prevent them from breaking
other platforms once we can build them into a combined kernel.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-12-01 21:50:24 +01:00
Arnd Bergmann 484c213b10 ARM: S3C64XX: fix building without CONFIG_PM_SLEEP
arch/arm/mach-s3c64xx/built-in.o: In function `s3c_pm_restore_core':
:(.text+0x5d0): undefined reference to `s3c_pm_do_restore_core'
:(.text+0x5d4): undefined reference to `s3c_pm_do_restore'
arch/arm/mach-s3c64xx/built-in.o: In function `s3c_pm_save_core':
:(.text+0x60c): undefined reference to `s3c_pm_do_save'
arch/arm/mach-s3c64xx/built-in.o: In function `s3c64xx_irq_pm_resume':
:(.text+0x670): undefined reference to `s3c_pm_do_restore'
arch/arm/mach-s3c64xx/built-in.o: In function `s3c64xx_irq_pm_suspend':
:(.text+0x6d8): undefined reference to `s3c_pm_do_save'
arch/arm/mach-s3c64xx/built-in.o: In function `s3c_cpu_resume':
:(.text+0x71c): undefined reference to `cpu_resume'

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:50:22 +09:00
Ulf Hansson d40fce7e62 ARM: s3c64xx: Leave disabling of unused PM domains to genpd
Since genpd at late init, will try to disable unused PM domains we
don't need to do it from the machine specific code as well.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09 00:46:12 +02:00
Tomasz Figa de7fe0807c ARM: SAMSUNG: Save UART DIVSLOT register based on SoC type
The only SoC that does not have DIVSLOT register is S3C2410, so instead
of exporting a variable for platforms to set if DIVSLOT register should
be preserved, it's enough to simply check whether we are running on
a S3C2410 instead.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-03-21 04:05:57 +09:00
Linus Walleij b0161caa72 ARM: S3C[24|64]xx: move includes back under <mach/> scope
When refactoring and breaking out the includes for the
machine-specific GPIO configuration, two files were created
in <linux/platform_data/gpio-samsung-s3c[24|64]xx.h>, but as
that namespace shall be used for defining data exchanged
between machines and drivers, using it for these broad macros
and config settings is wrong.

Move the headers back into the machine-local
<mach/gpio-samsung.h> file and think about the next step.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-14 15:24:06 +01:00
Linus Walleij 41c3548e6d ARM: s3c64xx: get rid of custom <mach/gpio.h>
This isolates the custom S3C64xx GPIO definition table to
<linux/platform_data/gpio-samsung-s3x64xx.h> as this is
used in a few different places in the kernel, removing the
need to depend on the implicit inclusion of <mach/gpio.h>
from <linux/gpio.h> and thus getting rid of a few nasty
cross-dependencies.

Also delete the CONFIG_SAMSUNG_GPIO_EXTRA stuff. Instead
roof the number of GPIOs for this platform:
First sum up all the GPIO banks from A to Q: 187 GPIOs.
Add the 16 "board GPIOs" and the roof for SAMSUNG_GPIO_EXTRA,
128, so in total maximum 187+16+128 = 331 GPIOs, so let's
take the same roof as for S3C24XX: 512. This way we can do
away with the GPIO calculation macros for GPIO_BOARD_START,
BOARD_NR_GPIOS and the definition of ARCH_NR_GPIOS.

Cc: Mark Brown <broonie@kernel.org>
[on Mini6410 board]
Tested-by: Tomasz Figa <t.figa@samsung.com>
[for changes in mach-s3c64xx]
Acked-by: Tomasz Figa <t.figa@samsung.com>
Tested-by: Mark Brown <broonie@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20 18:19:36 +01:00
Tomasz Figa 66fcbe6b7c ARM: S3C64XX: Remove old clock management code
This patch removes old clock management code of S3C64xx, since the
platform has been already moved to the new clock driver using Common
Clock Framework.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-09-17 06:47:36 +09:00
Linus Torvalds b274776c54 arm-soc: cleanups
A large number of cleanups, all over the platforms. This is dominated
 largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
 others moving code out of arch/arm into more appropriate subsystems.
 The clocksource and irqchip drivers are now abstracted to the point
 where platforms that are already cleaned up do not need to even specify
 the driver they use, it can all get configured from the device tree
 as we do for normal device drivers. The clocksource changes basically
 touch every single platform in the process.
 
 We further clean up the use of platform specific header files here,
 with the goal of turning more of the platforms over to being
 "multiplatform" enabled, which implies that they cannot expose
 their headers to architecture independent code any more.
 
 It is expected that no functional changes are part of the cleanup.
 The overall reduction in total code lines is mostly the result of
 removing broken and obsolete code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyKmCrR//JCVInAQIN8RAAnb/uPytmlMjn5yCksF4Mvb/FVbn/TVwz
 KRIGpCHOzyKK1q7pM8NRUVWfjW2SZqbXJFqx6zBGKSlDPvFTOhsLyyupU+Tnyu5W
 IX4eIUBwb+a6H7XDHw0X2YI8uHzi5RNLhne0A1QyDKcnuHs1LDAttXnJHaK4Ap6Y
 NN2YFt3l3ld7DXWXJtMsw5v8lC10aeIFGTvXefaPDAdeMLivmI57qEUMDXknNr7W
 Odz/Rc0/cw3BNBVl/zNHA0jw7FOjKAymCYYNUa4xDCJEr+JnIRTqizd0N/YIIC7x
 aA2xjJ3oKUFyF51yiJE6nFuTyJznhwtehc+uiMOSIkjrPLym52LEHmd7G5Yqlmjz
 oiei09qBb870q3lGxwfht9iaeIwYgQFYGfD0yW5QWArCO5pxhtCPLPH7YZNZtcQd
 ZJRSGGqT/ljBz3bm0K9OLESeeTTN7+Nxvtpiz/CD+Piegz0gWJzDYJRTzkJ3UWpA
 WTVhVQdWUeX2JrNkgM7Z3Tu8iXOe+LIEs7kVXGJZSREmIIZiRvR36UrODZtAkp9I
 7YQ+srX/uaR832pgK0RrHK0zY0psU6MmIvhYxJZFbx7keiPA9eH6drb0x7tGqcUD
 FzEUzvcZvyqppndfBi+R60H/YKAhJDEXdwxzo6dyCpPQaW1T9GnzIqXuE1zin+Aw
 X7Y8YywMbHI=
 =DvgJ
 -----END PGP SIGNATURE-----

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "A large number of cleanups, all over the platforms.  This is dominated
  largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
  others moving code out of arch/arm into more appropriate subsystems.

  The clocksource and irqchip drivers are now abstracted to the point
  where platforms that are already cleaned up do not need to even
  specify the driver they use, it can all get configured from the device
  tree as we do for normal device drivers.  The clocksource changes
  basically touch every single platform in the process.

  We further clean up the use of platform specific header files here,
  with the goal of turning more of the platforms over to being
  "multiplatform" enabled, which implies that they cannot expose their
  headers to architecture independent code any more.

  It is expected that no functional changes are part of the cleanup.
  The overall reduction in total code lines is mostly the result of
  removing broken and obsolete code."

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  ARM: mvebu: correct gated clock documentation
  ARM: kirkwood: add missing include for nsa310
  ARM: exynos: move exynos4210-combiner to drivers/irqchip
  mfd: db8500-prcmu: update resource passing
  drivers/db8500-cpufreq: delete dangling include
  ARM: at91: remove NEOCORE 926 board
  sunxi: Cleanup the reset code and add meaningful registers defines
  ARM: S3C24XX: header mach/regs-mem.h local
  ARM: S3C24XX: header mach/regs-power.h local
  ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
  ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
  ARM: S3C24XX: transform s3c2443 subirqs into new structure
  ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2443 irq code to irq.c
  ARM: S3C24XX: transform s3c2416 irqs into new structure
  ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2416 irq init to common irq code
  ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
  ARM: S3C24XX: Move irq syscore-ops to irq-pm
  clocksource: always define CLOCKSOURCE_OF_DECLARE
  ...
2013-02-21 14:58:40 -08:00
Olof Johansson bda7997e34 Merge branch 'next/fixes-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/fixes-non-critical
From Kukjin Kim:
Here is Samsung fixes for v3.9 and it is not a critical fixes.

* 'next/fixes-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl
  ARM: SAMSUNG: Silence empty switch warning in fimc-core.h
  ARM: SAMSUNG: Silence empty switch warning in sdhci.h
  ARM: S5PV210: Fix early uart output in fifo mode
  ARM: S3C24XX: Fix compile breakage for SMDK2410
  ARM: S3C24XX: add missing platform_device.h include for osiris
  ARM: S3C24XX: let S3C2412_PM select S3C2412_PM_SLEEP
  ARM: SAMSUNG: Gracefully exit on suspend failure
  ARM: SAMSUNG: using vsnprintf instead of vsprintf for the limit buffer length 256
  ARM: S3C24XX: Make 'clk_msysclk' static
2013-02-17 16:03:12 -08:00
Olof Johansson 5b399db0b7 Merge branch 'next/cleanup-header' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup
From Kukjin Kim:
AS I commented, this makes <mach/*.h> local so that they could be removed.

* 'next/cleanup-header' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (26 commits)
  ARM: S3C64XX: Fix missing header error with CONFIG_CPU_IDLE enabled
  ARM: S3C64XX: make regs-syscon-power.h local
  ARM: S3C64XX: make regs-sys.h local
  ARM: S3C64XX: make regs-srom.h local
  ARM: S3C64XX: make regs-modem.h local
  ARM: S3C64XX: make regs-gpio-memport.h local
  ARM: S3C64XX: make crag6410.h local
  ARM: S3C24XX: remove dsc.c and make regs-dsc.h local
  ARM: S3C24XX: remove idle.h
  ARM: S3C2412: cleanup regs-s3c2412.h
  ARM: S3C2416: remove regs-s3c2416-mem.h and regs-s3c2416.h
  ARM: S3C24XX: make vr1000-cpld.h, vr1000-irq.h and vr1000-map.h local
  ARM: S3C24XX: make otom-map.h local
  ARM: S3C24XX: make osiris-cpld.h and osiris-map.h local
  ARM: S3C24XX: make h1940.h and h1940-latch.h local
  ARM: S3C24XX: make gta02.h local
  ARM: S3C24XX: make bast-cpld.h, bast-irq.h and bast-map.h local
  ARM: S3C24XX: make anubis-cpld, anubis-irq and anubis-map local
  ARM: SAMSUNG: cleanup mach/gpio-fns.h gpio-track.h and gpio-nrs.h
  ARM: SAMSUNG: cleanup mach/regs-audss.h file
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-04 21:49:29 -08:00
Abhilash Kesavan d3fcacf52d ARM: SAMSUNG: Gracefully exit on suspend failure
As per the Exynos5250 User Manual:
When there are pending interrupt events, WFI/WFE instruction are
ignored. To cancel the power-down sequence follow these steps:
1) Disable system power-down using CENTRAL_SEQ_CONFIGURATION register
2) Clear WAKEUP_STAT register
3) Enable interrupt service routine for CPU

Code for early wakeup for exynos already exists. Remove the panic
on suspend failure, clear the wakeup state register and return 1
from cpu_suspend to indicate a failed suspend (to a user daemon).

Older Samsung SoCs have similar panics and I have removed them all.
Haven't touched the S3C2410 sleep code.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-30 22:28:05 -08:00
Tomasz Figa c0d6cfd300 ARM: S3C64XX: Fix build error with CONFIG_S3C_DEV_FB disabled
If there is no board selecting CONFIG_S3C_DEV_FB enabled, build will
fail on arch/arm/mach-s3c64xx/pm.c, where s3c_device_fb is referenced.

This patch adds ifdef guard around the code making it compile only
when CONFIG_S3C_DEV_FB is enabled.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-16 15:45:52 -08:00
Kukjin Kim e8f55885f8 ARM: S3C64XX: make regs-syscon-power.h local
The header file can be local in mach-s3c64xx/.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-10 10:45:40 -08:00
Kukjin Kim f2bfd174bd ARM: S3C64XX: make regs-sys.h local
The header file can be local in mach-s3c64xx/.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-10 10:45:40 -08:00
Kukjin Kim a81c19700d ARM: S3C64XX: make regs-modem.h local
The header can be local in mach-s3c64xx/.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-10 10:45:39 -08:00
Kukjin Kim 8bb86ead06 ARM: S3C64XX: make regs-gpio-memport.h local
The header can be local in mach-s3c64xx/.

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-10 10:45:39 -08:00
Shawn Guo cc8f252b71 ARM: s3c64xx: use machine specific hook for late init
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-08 20:36:24 +08:00
Mark Brown d5b9cdbcf7 ARM: S3C64XX: Remove unconditional power domain disables
Now that we have software runtime power management support this code is
redundant.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-12 02:16:21 +09:00
Linus Torvalds 6d889d03ab Board-level changes
This adds and extends support for specific boards on a number of
 ARM platforms:  omap, imx, samsung, tegra, ...
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUATwtXvWCrR//JCVInAQKWjw/+IgL536c+ksAfIFLvQpDq0cV1J4xdGoqT
 AdpK4bp3ze3c5HduweyZ6tKun9Shfg3/wuJH5ZwoJDzfRpF1DpALJDSZxRfll/y9
 x7FbiVS8Kw+UJ02J1Z4jC4pguXtiUFGn9ebUI5V4wt5N8/xawFuWQ/6QybfmBSwP
 ZvZa0sONEZwIPMMRO1/Q31z7jotBhcx9vYorUu4xyTx8yRK2DLD1eZENa107KuVA
 0TQFreaGVvTgfLGTXy7wH41/VEKNj5qMOIBgpswLfQh85D0wXbZ98FsUt34t+r2D
 9XUg8nkNUbmTQ/NokiVgqoju0UVNmjITIjQWFV/3qmhlQo5kO8tKJV+qmVMkw49b
 VaazO/VpbY2+8ucHaTMKlnInUVwOOvlTRX8QJjOmyRWqYmk190jWYUtpsq9Xbt49
 h/U9Grz+koFpDmAZTyscm3Zlub9U9YYvnjrA8UnbxpCeBpE2qy2+UIucnF1hTf7K
 zn+kHvot4glubbRqLYhda3g+xomBf+xfvoGhFyutno2pBOm04Jd8E9ZQzkvxMnPn
 w2S8Lo78KtKXVcbZbQDRW5UhaiRnu969P0gX2PcSSeTNn7FZF4FME1RB+CXbWazx
 G4pfOfoso573m1UXjf/ueAdZU4H63WEMgULuXdzwmSlTZ97Lk5+sb+NHCPg5p4cA
 6QHbmogFraA=
 =lYb/
 -----END PGP SIGNATURE-----

Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Board-level changes

This adds and extends support for specific boards on a number of
ARM platforms:  omap, imx, samsung, tegra, ...

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits)
  Enable 32 bit flash support for iMX21ADS board
  ARM: mx31pdk: Add MC13783 RTC support
  iomux-mx25: configuration to support CSPI3 on CSI pins
  MX1:apf9328: Add i2c support
  mioa701: add newly available DoC G3 chip
  arm/tegra: remove __initdata annotation from pinmux tables
  arm/tegra: Use bus notifiers to trigger pinmux setup
  arm/tegra: Refactor board-*-pinmux.c to share code
  arm/tegra: Fix mistake in Trimslice's pinmux
  arm/tegra: Rework Seaboard-vs-Ventana pinmux table
  arm/tegra: Remove useless entries from ventana_pinmux[]
  arm/tegra: PCIe: Remove include of mach/pinmux.h
  arm/tegra: Harmony PCIe: Don't touch pinmux
  arm/tegra: Add AUXDATA for tegra-pinmux and tegra-gpio
  arm/tegra: Split Seaboard GPIO table to allow for Ventana
  ARM: imx6q: generate imx6q dtb files
  arm/imx6q: Rename Sabreauto to Armadillo2
  arm/imx6q-sabrelite: add enet phy ksz9021rn fixup
  arm/imx6: add imx6q sabrelite board support
  dts/imx: rename uart labels to consistent with hw spec
  ...
2012-01-09 14:37:41 -08:00
Mark Brown c656c30668 ARM: S3C64XX: Implement basic power domain support
The S3C64xx SoCs contain a set of gateable power domains which can be
enabled and disabled at runtime in order to save power.  Use the generic
power domain code to implement support for these in software, enabling
runtime control of most domains:

 - ETM (not supported in mainline).
 - Domain G: 3D acceleration (no mainline support).
 - Domain V: MFC (no mainline support).
 - Domain I: JPEG and camera interface (no mainline support).
 - Domain P: 2D acceleration, TV encoder and scaler (no mainline support)
 - Domain S: Security (no mainline support).
 - Domain F: LCD (driver already uses runtime PM), post processing and
   rotation (no mainline support).

The IROM domain is marked as always enabled as we should arrange for it
to be enabled when we suspend which will need a bit more work.

Due to all the conditional device registration that the platform does
wrap s3c_pm_init() with s3c64xx_pm_init() which actually puts the device
into the power domain after the machines have registered, looking for
platform data to tell if the device was registered. Since currently only
Cragganmore actually sets up PM that is the only machine updated.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-09 23:22:59 +01:00
Mark Brown 51ccd81d9b ARM: S3C64XX: Power gate unused domains
The S3C64xx CPUs have power gating support with a series of software
controllable power domains in the SoC. To take full advantage of these
we should implement runtime PM support but since several of the IP blocks
have no in tree drivers (and at this point aren't likely to acquire such
drivers) we can get some benefit from the hardware much more easily if
we just turn those blocks off unconditionally. This will cut down on the
leakage these domains generate without interfering with active usage.

Do this for:
 - Domain G: 3D acceleration
 - Domain V: MFC
 - Domain I: JPEG and camera interface
 - Domain P: 2D acceleration, TV encoder and scaler

This is easy to reverse if any of these devices do acquire drivers in the
future or as part of out of tree patches for them.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-03 19:49:26 +09:00
Tomasz Figa d9018df007 ARM: S3C64XX: Save/restore S3C64XX_MODEM_MIFPCON on suspend/resume
This patch makes sure that the LCD bypass state is preserved during sleep mode.
It achieves this by saving the S3C64XX_MODEM_MIFPCON register, which is not
handled by any other code currently.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-19 16:38:05 +09:00
Tomasz Figa 348276f4a3 ARM: S3C64XX: Save/restore S3C64XX_SDMA_SEL on suspend/resume
This patch makes sure that S3C64XX_SDMA_SEL register is preserved during
sleep mode, as it is critical for DMA operation and the DMA driver alone
does not provide any power management facilities.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-19 16:38:00 +09:00
Abhilash Kesavan f98d429d7a ARM: S3C64XX: Fix build break in PM debug
When S3C_PM_DEBUG_LED_SMDK is enabled for suspend/resume debugging, the following
compilation error occurs:

arch/arm/mach-s3c64xx/pm.c: In function 's3c_pm_debug_smdkled':
arch/arm/mach-s3c64xx/pm.c:41: error: implicit declaration of function 'gpio_set_value'
arch/arm/mach-s3c64xx/pm.c:41: error: implicit declaration of function 'S3C64XX_GPN'
arch/arm/mach-s3c64xx/pm.c: In function 's3c64xx_pm_init':
arch/arm/mach-s3c64xx/pm.c:184: error: implicit declaration of function 'gpio_request'
arch/arm/mach-s3c64xx/pm.c:188: error: implicit declaration of function 'gpio_direction_output'

Fix the error by including linux/gpio.h

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19 20:57:36 +09:00
Russell King 29cb3cd208 ARM: pm: allow suspend finisher to return error codes
There are SoCs where attempting to enter a low power state is ignored,
and the CPU continues executing instructions with all state preserved.
It is over-complex at that point to disable the MMU just to call the
resume path.

Instead, allow the suspend finisher to return error codes to abort
suspend in this circumstance, where the cpu_suspend internals will then
unwind the saved state on the stack.  Also omit the tlb flush as no
changes to the page tables will have happened.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-02 09:54:01 +01:00
Russell King e7089da956 ARM: pm: samsung: move cpu_suspend into C code
Move the call to cpu_suspend into C code, and noticing that all the
s3c_cpu_save implementations are now identical, we can move this
into the common samsung code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-24 08:48:44 +01:00
Joonyoung Shim 3185847957 ARM: S3C64XX: Remove gpio-bank-X header files
The gpio-bank-X header files of S3C64XX have definitions
which can be substituted by other common GPIO API.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-05-06 09:37:36 +09:00
Ben Dooks fda225774e ARM: S3C64XX: PM: Synchronise wakeup mask on suspend
Use the new wakeup mask synchronisation code to set the
relevant wakeup mask bits.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20 21:07:08 +09:00
Ben Dooks f7be9abaa5 ARM: S3C64XX: Move core support to mach-s3c64xx
Move the core S3C64XX support to mach-s3c64xx as it is unlikely to be used
outside of this directory. Also move the SoC header files in with it.

This includes the clock, cpu, cpufreq, dma, gpiolib and pll support.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-20 22:33:54 +00:00