Commit Graph

27 Commits

Author SHA1 Message Date
Jon Mason f9a2cf890b NTB: Comment Fix
Add "data" ntb_register_db_callback parameter description comment and
correct poor spelling.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:08:00 -07:00
Jon Mason 3daa3a073e NTB: Remove unused variable
Remove unused pci_dev variable from ntb_transport_free()

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:07:59 -07:00
Jon Mason 497938890a NTB: Rename Variables for NTB-RP
Many variable names in the NTB driver refer to the primary or secondary
side.  However, these variables will be used to access the reverse case
when in NTB-RP mode.  Make these names more generic in anticipation of
NTB-RP support.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:07:58 -07:00
Jon Mason 282a2feeb9 NTB: Use DMA Engine to Transmit and Receive
Allocate and use a DMA engine channel to transmit and receive data over
NTB.  If none is allocated, fall back to using the CPU to transfer data.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
2013-09-05 11:04:09 -07:00
Jon Mason 948d3a65b6 NTB: Xeon Errata Workaround
There is a Xeon hardware errata related to writes to SDOORBELL or
B2BDOORBELL in conjunction with inbound access to NTB MMIO Space, which
may hang the system.  To workaround this issue, use one of the memory
windows to access the interrupt and scratch pad registers on the remote
system.  This bypasses the issue, but removes one of the memory windows
from use by the transport.  This reduction of MWs necessitates adding
some logic to determine the number of available MWs.

Since some NTB usage methodologies may have unidirectional traffic, the
ability to disable the workaround via modparm has been added.

See BF113 in
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/xeon-c5500-c3500-spec-update.pdf
See BT119 in
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/xeon-e5-family-spec-update.pdf

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 13:51:51 -07:00
Jon Mason 1517a3f21a NTB: Correct debugfs to work with more than 1 NTB Device
Debugfs was setup in NTB to only have a single debugfs directory.  This
resulted in the leaking of debugfs directories and files when multiple
NTB devices were present, due to each device stomping on the variables
containing the previous device's values (thus preventing them from being
freed on cleanup).  Correct this by creating a secondary directory of
the PCI BDF for each device present, and nesting the previously existing
information in those directories.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 11:14:54 -07:00
Jon Mason 8b19d450ad
NTB: Multiple NTB client fix
Fix issue with adding multiple ntb client devices to the ntb virtual
bus.  Previously, multiple devices would be added with the same name,
resulting in crashes.  To get around this issue, add a unique number to
the device when it is added.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:58:22 -07:00
Jon Mason c336acd333
NTB: memcpy lockup workaround
The system will appear to lockup for long periods of time due to the NTB
driver spending too much time in memcpy.  Avoid this by reducing the
number of packets that can be serviced on a given interrupt.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:58:06 -07:00
Jon Mason c9d534c8cb
NTB: Correctly handle receive buffers of the minimal size
The ring logic of the NTB receive buffer/transmit memory window requires
there to be at least 2 payload sized allotments.  For the minimal size
case, split the buffer into two and set the transport_mtu to the
appropriate size.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:59 -07:00
Jon Mason 90f9e93464
NTB: reset tx_index on link toggle
If the NTB link toggles, the driver could stop receiving due to the
tx_index not being set to 0 on the transmitting size on a link-up event.
This is due to the driver expecting the incoming data to start at the
beginning of the receive buffer and not at a random place.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:51 -07:00
Jon Mason b77b2637b3
NTB: Link toggle memory leak
Each link-up will allocate a new NTB receive buffer when the NTB
properties are negotiated with the remote system.  These allocations did
not check for existing buffers and thus did not free them.  Now, the
driver will check for an existing buffer and free it if not of the
correct size, before trying to alloc a new one.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:45 -07:00
Jon Mason 113fc505b8
NTB: Handle 64bit BAR sizes
64bit BAR sizes are permissible with an NTB device.  To support them
various modifications and clean-ups were required, most significantly
using 2 32bit scratch pad registers for each BAR.

Also, modify the driver to allow more than 2 Memory Windows.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:40 -07:00
Dan Carpenter cc0f868d8a
NTB: fix pointer math issues
->remote_rx_info and ->rx_info are struct ntb_rx_info pointers.  If we
add sizeof(struct ntb_rx_info) then it goes too far.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:29 -07:00
Jon Mason 186f27ff9f
NTB: variable dereferenced before check
Correct instances of variable dereferencing before checking its value on
the functions exported to the client drivers.  Also, add sanity checks
for all exported functions.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:17 -07:00
Jon Mason 74465645cd NTB: Fix Sparse Warnings
Address the sparse warnings and resulting fallout

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21 14:34:21 -08:00
Jon Mason 448c6fb3a3 NTB: Out of free receive entries issue
If the NTB client driver enqueues the maximum number of rx buffers, it
will not be able to re-enqueue another in its callback handler due to a
lack of free entries.  This can be avoided by adding the current entry
to the free queue prior to calling the client callback handler.  With
this change, ntb_netdev will no longer encounter a rx error on its first
packet.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:52 -08:00
Jon Mason 793c20e9c9 NTB: Remove reads across NTB
CPU reads across NTB are slow(er) and can hang the local system if an
ECC error is encountered on the remote.  To work around the need for a
read, have the remote side write its current position in the rx buffer
to the local system's buffer and use that to see if there is room when
transmitting.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:51 -08:00
Jon Mason d7237e22bb NTB: correct stack usage warning in debugfs_read
Correct gcc warning of using too much stack debugfs_read.  This is done
by kmallocing the buffer instead of using the char array on stack.
Also, shrinking the buffer to something closer to what is currently
being used.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:51 -08:00
Jon Mason f766755c30 NTB: whitespace cleanups
Whitespace cleanups found via `indent`

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:51 -08:00
Jon Mason 170d35a57c NTB: namespacecheck cleanups
Declare ntb_bus_type static to remove it from name space, and remove
unused ntb_get_max_spads function.  Found via `make namespacecheck`.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:51 -08:00
Jon Mason d66d7ac2e0 NTB: use simple_open for debugfs
Use simple_open for debugfs instead of recreating it in the NTB driver.
Caught by coccicheck.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:51 -08:00
Jon Mason 7b4f2d3c3b NTB: No sleeping in interrupt context
Move all cancel_delayed_work_sync to a work thread to prevent sleeping
in interrupt context (when the NTB link goes down).  Caught via
'Sleep inside atomic section checking'

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:51 -08:00
Jon Mason ef114ed506 NTB: separate transmit and receive windows
Since it is possible for the memory windows on the two NTB connected
systems to be different sizes, the divergent sizes must be accounted for
in the segmentation of the MW's on each side.  Create separate size
variables and initialization as necessary.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:50 -08:00
Jon Mason 842c1ddea5 NTB: correct memory barrier
mmiowb is not sufficient to flush the data and is causing data
corruption.  Change to wmb and the data corruption is no more.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:50 -08:00
Jon Mason 8222b402e2 NTB: Handle ntb client device probes without present hardware
Attempts to probe client ntb drivers without ntb hardware present will
result in null pointer dereference due to the lack of the ntb bus device
being registers.  Check to see if this is the case, and fail all calls
by the clients registering their drivers.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:50 -08:00
Greg Kroah-Hartman 78a61ab79a ntb: remove __dev* markings
These are now gone from the kernel, so remove them from the newly-added
drivers before they start to cause build errors for people.

Cc: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 19:17:42 -08:00
Jon Mason fce8a7bb5b PCI-Express Non-Transparent Bridge Support
A PCI-Express non-transparent bridge (NTB) is a point-to-point PCIe bus
connecting 2 systems, providing electrical isolation between the two subsystems.
A non-transparent bridge is functionally similar to a transparent bridge except
that both sides of the bridge have their own independent address domains.  The
host on one side of the bridge will not have the visibility of the complete
memory or I/O space on the other side of the bridge.  To communicate across the
non-transparent bridge, each NTB endpoint has one (or more) apertures exposed to
the local system.  Writes to these apertures are mirrored to memory on the
remote system.  Communications can also occur through the use of doorbell
registers that initiate interrupts to the alternate domain, and scratch-pad
registers accessible from both sides.

The NTB device driver is needed to configure these memory windows, doorbell, and
scratch-pad registers as well as use them in such a way as they can be turned
into a viable communication channel to the remote system.  ntb_hw.[ch]
determines the usage model (NTB to NTB or NTB to Root Port) and abstracts away
the underlying hardware to provide access and a common interface to the doorbell
registers, scratch pads, and memory windows.  These hardware interfaces are
exported so that other, non-mainlined kernel drivers can access these.
ntb_transport.[ch] also uses the exported interfaces in ntb_hw.[ch] to setup a
communication channel(s) and provide a reliable way of transferring data from
one side to the other, which it then exports so that "client" drivers can access
them.  These client drivers are used to provide a standard kernel interface
(i.e., Ethernet device) to NTB, such that Linux can transfer data from one
system to the other in a standard way.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 19:11:14 -08:00