Commit Graph

277 Commits

Author SHA1 Message Date
Linus Torvalds 534c97b095 Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull 'full dynticks' support from Ingo Molnar:
 "This tree from Frederic Weisbecker adds a new, (exciting! :-) core
  kernel feature to the timer and scheduler subsystems: 'full dynticks',
  or CONFIG_NO_HZ_FULL=y.

  This feature extends the nohz variable-size timer tick feature from
  idle to busy CPUs (running at most one task) as well, potentially
  reducing the number of timer interrupts significantly.

  This feature got motivated by real-time folks and the -rt tree, but
  the general utility and motivation of full-dynticks runs wider than
  that:

   - HPC workloads get faster: CPUs running a single task should be able
     to utilize a maximum amount of CPU power.  A periodic timer tick at
     HZ=1000 can cause a constant overhead of up to 1.0%.  This feature
     removes that overhead - and speeds up the system by 0.5%-1.0% on
     typical distro configs even on modern systems.

   - Real-time workload latency reduction: CPUs running critical tasks
     should experience as little jitter as possible.  The last remaining
     source of kernel-related jitter was the periodic timer tick.

   - A single task executing on a CPU is a pretty common situation,
     especially with an increasing number of cores/CPUs, so this feature
     helps desktop and mobile workloads as well.

  The cost of the feature is mainly related to increased timer
  reprogramming overhead when a CPU switches its tick period, and thus
  slightly longer to-idle and from-idle latency.

  Configuration-wise a third mode of operation is added to the existing
  two NOHZ kconfig modes:

   - CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named
     as a config option.  This is the traditional Linux periodic tick
     design: there's a HZ tick going on all the time, regardless of
     whether a CPU is idle or not.

   - CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the
     periodic tick when a CPU enters idle mode.

   - CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the
     tick when a CPU is idle, also slows the tick down to 1 Hz (one
     timer interrupt per second) when only a single task is running on a
     CPU.

  The .config behavior is compatible: existing !CONFIG_NO_HZ and
  CONFIG_NO_HZ=y settings get translated to the new values, without the
  user having to configure anything.  CONFIG_NO_HZ_FULL is turned off by
  default.

  This feature is based on a lot of infrastructure work that has been
  steadily going upstream in the last 2-3 cycles: related RCU support
  and non-periodic cputime support in particular is upstream already.

  This tree adds the final pieces and activates the feature.  The pull
  request is marked RFC because:

   - it's marked 64-bit only at the moment - the 32-bit support patch is
     small but did not get ready in time.

   - it has a number of fresh commits that came in after the merge
     window.  The overwhelming majority of commits are from before the
     merge window, but still some aspects of the tree are fresh and so I
     marked it RFC.

   - it's a pretty wide-reaching feature with lots of effects - and
     while the components have been in testing for some time, the full
     combination is still not very widely used.  That it's default-off
     should reduce its regression abilities and obviously there are no
     known regressions with CONFIG_NO_HZ_FULL=y enabled either.

   - the feature is not completely idempotent: there is no 100%
     equivalent replacement for a periodic scheduler/timer tick.  In
     particular there's ongoing work to map out and reduce its effects
     on scheduler load-balancing and statistics.  This should not impact
     correctness though, there are no known regressions related to this
     feature at this point.

   - it's a pretty ambitious feature that with time will likely be
     enabled by most Linux distros, and we'd like you to make input on
     its design/implementation, if you dislike some aspect we missed.
     Without flaming us to crisp! :-)

  Future plans:

   - there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off
     the periodic tick altogether when there's a single busy task on a
     CPU.  We'd first like 1 Hz to be exposed more widely before we go
     for the 0 Hz target though.

   - once we reach 0 Hz we can remove the periodic tick assumption from
     nr_running>=2 as well, by essentially interrupting busy tasks only
     as frequently as the sched_latency constraints require us to do -
     once every 4-40 msecs, depending on nr_running.

  I am personally leaning towards biting the bullet and doing this in
  v3.10, like the -rt tree this effort has been going on for too long -
  but the final word is up to you as usual.

  More technical details can be found in Documentation/timers/NO_HZ.txt"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  sched: Keep at least 1 tick per second for active dynticks tasks
  rcu: Fix full dynticks' dependency on wide RCU nocb mode
  nohz: Protect smp_processor_id() in tick_nohz_task_switch()
  nohz_full: Add documentation.
  cputime_nsecs: use math64.h for nsec resolution conversion helpers
  nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config
  nohz: Reduce overhead under high-freq idling patterns
  nohz: Remove full dynticks' superfluous dependency on RCU tree
  nohz: Fix unavailable tick_stop tracepoint in dynticks idle
  nohz: Add basic tracing
  nohz: Select wide RCU nocb for full dynticks
  nohz: Disable the tick when irq resume in full dynticks CPU
  nohz: Re-evaluate the tick for the new task after a context switch
  nohz: Prepare to stop the tick on irq exit
  nohz: Implement full dynticks kick
  nohz: Re-evaluate the tick from the scheduler IPI
  sched: New helper to prevent from stopping the tick in full dynticks
  sched: Kick full dynticks CPU that have more than one task enqueued.
  perf: New helper to prevent full dynticks CPUs from stopping tick
  perf: Kick full dynticks CPU if events rotation is needed
  ...
2013-05-05 13:23:27 -07:00
Linus Torvalds 64049d1973 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Misc fixes plus a small hw-enablement patch for Intel IB model 58
  uncore events"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/lbr: Demand proper privileges for PERF_SAMPLE_BRANCH_KERNEL
  perf/x86/intel/lbr: Fix LBR filter
  perf/x86: Blacklist all MEM_*_RETIRED events for Ivy Bridge
  perf: Fix vmalloc ring buffer pages handling
  perf/x86/intel: Fix unintended variable name reuse
  perf/x86/intel: Add support for IvyBridge model 58 Uncore
  perf/x86/intel: Fix typo in perf_event_intel_uncore.c
  x86: Eliminate irq_mis_count counted in arch_irq_stat
2013-05-05 11:37:16 -07:00
Frederic Weisbecker c032862fba Merge commit '8700c95adb03' into timers/nohz
The full dynticks tree needs the latest RCU and sched
upstream updates in order to fix some dependencies.

Merge a common upstream merge point that has these
updates.

Conflicts:
	include/linux/perf_event.h
	kernel/rcutree.h
	kernel/rcutree_plugin.h

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2013-05-02 17:54:19 +02:00
Jiri Olsa 5919b30933 perf: Fix vmalloc ring buffer pages handling
If we allocate perf ring buffer with the size of single (user)
page, we will get memory corruption when releasing itin
rb_free_work function (for CONFIG_PERF_USE_VMALLOC option).

For single page sized ring buffer the page_order is -1 (because
nr_pages is 0). This needs to be recognized in the rb_free_work
function to release proper amount of pages.

Adding data_page_nr function that returns number of allocated
data pages. Customizing the rest of the code to use it.

Reported-by: Jan Stancek <jstancek@redhat.com>
Original-patch-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20130319143509.GA1128@krava.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-01 12:34:46 +02:00
Linus Torvalds e0972916e8 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Features:

   - Add "uretprobes" - an optimization to uprobes, like kretprobes are
     an optimization to kprobes.  "perf probe -x file sym%return" now
     works like kretprobes.  By Oleg Nesterov.

   - Introduce per core aggregation in 'perf stat', from Stephane
     Eranian.

   - Add memory profiling via PEBS, from Stephane Eranian.

   - Event group view for 'annotate' in --stdio, --tui and --gtk, from
     Namhyung Kim.

   - Add support for AMD NB and L2I "uncore" counters, by Jacob Shin.

   - Add Ivy Bridge-EP uncore support, by Zheng Yan

   - IBM zEnterprise EC12 oprofile support patchlet from Robert Richter.

   - Add perf test entries for checking breakpoint overflow signal
     handler issues, from Jiri Olsa.

   - Add perf test entry for for checking number of EXIT events, from
     Namhyung Kim.

   - Add perf test entries for checking --cpu in record and stat, from
     Jiri Olsa.

   - Introduce perf stat --repeat forever, from Frederik Deweerdt.

   - Add --no-demangle to report/top, from Namhyung Kim.

   - PowerPC fixes plus a couple of cleanups/optimizations in uprobes
     and trace_uprobes, by Oleg Nesterov.

  Various fixes and refactorings:

   - Fix dependency of the python binding wrt libtraceevent, from
     Naohiro Aota.

   - Simplify some perf_evlist methods and to allow 'stat' to share code
     with 'record' and 'trace', by Arnaldo Carvalho de Melo.

   - Remove dead code in related to libtraceevent integration, from
     Namhyung Kim.

   - Revert "perf sched: Handle PERF_RECORD_EXIT events" to get 'perf
     sched lat' back working, by Arnaldo Carvalho de Melo

   - We don't use Newt anymore, just plain libslang, by Arnaldo Carvalho
     de Melo.

   - Kill a bunch of die() calls, from Namhyung Kim.

   - Fix build on non-glibc systems due to libio.h absence, from Cody P
     Schafer.

   - Remove some perf_session and tracing dead code, from David Ahern.

   - Honor parallel jobs, fix from Borislav Petkov

   - Introduce tools/lib/lk library, initially just removing duplication
     among tools/perf and tools/vm.  from Borislav Petkov

  ... and many more I missed to list, see the shortlog and git log for
  more details."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (136 commits)
  perf/x86/intel/P4: Robistify P4 PMU types
  perf/x86/amd: Fix AMD NB and L2I "uncore" support
  perf/x86/amd: Remove old-style NB counter support from perf_event_amd.c
  perf/x86: Check all MSRs before passing hw check
  perf/x86/amd: Add support for AMD NB and L2I "uncore" counters
  perf/x86/intel: Add Ivy Bridge-EP uncore support
  perf/x86/intel: Fix SNB-EP CBO and PCU uncore PMU filter management
  perf/x86: Avoid kfree() in CPU_{STARTING,DYING}
  uprobes/perf: Avoid perf_trace_buf_prepare/submit if ->perf_events is empty
  uprobes/tracing: Don't pass addr=ip to perf_trace_buf_submit()
  uprobes/tracing: Change create_trace_uprobe() to support uretprobes
  uprobes/tracing: Make seq_printf() code uretprobe-friendly
  uprobes/tracing: Make register_uprobe_event() paths uretprobe-friendly
  uprobes/tracing: Make uprobe_{trace,perf}_print() uretprobe-friendly
  uprobes/tracing: Introduce is_ret_probe() and uretprobe_dispatcher()
  uprobes/tracing: Introduce uprobe_{trace,perf}_print() helpers
  uprobes/tracing: Generalize struct uprobe_trace_entry_head
  uprobes/tracing: Kill the pointless local_save_flags/preempt_count calls
  uprobes/tracing: Kill the pointless seq_print_ip_sym() call
  uprobes/tracing: Kill the pointless task_pt_regs() calls
  ...
2013-04-30 07:41:01 -07:00
Linus Torvalds 191a712090 Merge branch 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:

 - Fixes and a lot of cleanups.  Locking cleanup is finally complete.
   cgroup_mutex is no longer exposed to individual controlelrs which
   used to cause nasty deadlock issues.  Li fixed and cleaned up quite a
   bit including long standing ones like racy cgroup_path().

 - device cgroup now supports proper hierarchy thanks to Aristeu.

 - perf_event cgroup now supports proper hierarchy.

 - A new mount option "__DEVEL__sane_behavior" is added.  As indicated
   by the name, this option is to be used for development only at this
   point and generates a warning message when used.  Unfortunately,
   cgroup interface currently has too many brekages and inconsistencies
   to implement a consistent and unified hierarchy on top.  The new flag
   is used to collect the behavior changes which are necessary to
   implement consistent unified hierarchy.  It's likely that this flag
   won't be used verbatim when it becomes ready but will be enabled
   implicitly along with unified hierarchy.

   The option currently disables some of broken behaviors in cgroup core
   and also .use_hierarchy switch in memcg (will be routed through -mm),
   which can be used to make very unusual hierarchy where nesting is
   partially honored.  It will also be used to implement hierarchy
   support for blk-throttle which would be impossible otherwise without
   introducing a full separate set of control knobs.

   This is essentially versioning of interface which isn't very nice but
   at this point I can't see any other options which would allow keeping
   the interface the same while moving towards hierarchy behavior which
   is at least somewhat sane.  The planned unified hierarchy is likely
   to require some level of adaptation from userland anyway, so I think
   it'd be best to take the chance and update the interface such that
   it's supportable in the long term.

   Maintaining the existing interface does complicate cgroup core but
   shouldn't put too much strain on individual controllers and I think
   it'd be manageable for the foreseeable future.  Maybe we'll be able
   to drop it in a decade.

Fix up conflicts (including a semantic one adding a new #include to ppc
that was uncovered by header the file changes) as per Tejun.

* 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (45 commits)
  cpuset: fix compile warning when CONFIG_SMP=n
  cpuset: fix cpu hotplug vs rebuild_sched_domains() race
  cpuset: use rebuild_sched_domains() in cpuset_hotplug_workfn()
  cgroup: restore the call to eventfd->poll()
  cgroup: fix use-after-free when umounting cgroupfs
  cgroup: fix broken file xattrs
  devcg: remove parent_cgroup.
  memcg: force use_hierarchy if sane_behavior
  cgroup: remove cgrp->top_cgroup
  cgroup: introduce sane_behavior mount option
  move cgroupfs_root to include/linux/cgroup.h
  cgroup: convert cgroupfs_root flag bits to masks and add CGRP_ prefix
  cgroup: make cgroup_path() not print double slashes
  Revert "cgroup: remove bind() method from cgroup_subsys."
  perf: make perf_event cgroup hierarchical
  cgroup: implement cgroup_is_descendant()
  cgroup: make sure parent won't be destroyed before its children
  cgroup: remove bind() method from cgroup_subsys.
  devcg: remove broken_hierarchy tag
  cgroup: remove cgroup_lock_is_held()
  ...
2013-04-29 19:14:20 -07:00
Frederic Weisbecker 026249ef10 perf: New helper to prevent full dynticks CPUs from stopping tick
Provide a new helper that help full dynticks CPUs to prevent
from stopping their tick in case there are events in the local
rotation list.

This way we make sure that perf_event_task_tick() is serviced
on demand.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
2013-04-22 19:59:39 +02:00
Frederic Weisbecker 12351ef8f9 perf: Kick full dynticks CPU if events rotation is needed
Kick the current CPU's tick by sending it a self IPI when
an event is queued on the rotation list and it is the first
element inserted. This makes sure that perf_event_task_tick()
works on full dynticks CPUs.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
2013-04-22 19:59:37 +02:00
Paul E. McKenney c79aa0d965 events: Protect access via task_subsys_state_check()
The following RCU splat indicates lack of RCU protection:

[  953.267649] ===============================
[  953.267652] [ INFO: suspicious RCU usage. ]
[  953.267657] 3.9.0-0.rc6.git2.4.fc19.ppc64p7 #1 Not tainted
[  953.267661] -------------------------------
[  953.267664] include/linux/cgroup.h:534 suspicious rcu_dereference_check() usage!
[  953.267669]
[  953.267669] other info that might help us debug this:
[  953.267669]
[  953.267675]
[  953.267675] rcu_scheduler_active = 1, debug_locks = 0
[  953.267680] 1 lock held by glxgears/1289:
[  953.267683]  #0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<c00000000027f884>] .prepare_bprm_creds+0x34/0xa0
[  953.267700]
[  953.267700] stack backtrace:
[  953.267704] Call Trace:
[  953.267709] [c0000001f0d1b6e0] [c000000000016e30] .show_stack+0x130/0x200 (unreliable)
[  953.267717] [c0000001f0d1b7b0] [c0000000001267f8] .lockdep_rcu_suspicious+0x138/0x180
[  953.267724] [c0000001f0d1b840] [c0000000001d43a4] .perf_event_comm+0x4c4/0x690
[  953.267731] [c0000001f0d1b950] [c00000000027f6e4] .set_task_comm+0x84/0x1f0
[  953.267737] [c0000001f0d1b9f0] [c000000000280414] .setup_new_exec+0x94/0x220
[  953.267744] [c0000001f0d1ba70] [c0000000002f665c] .load_elf_binary+0x58c/0x19b0
...

This commit therefore adds the required RCU read-side critical
section to perf_event_comm().

Reported-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Link: http://lkml.kernel.org/r/20130419190124.GA8638@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Gustavo Luiz Duarte <gusld@br.ibm.com>
2013-04-21 11:21:39 +02:00
Ingo Molnar 73e21ce28d Merge branch 'perf/urgent' into perf/core
Conflicts:
	arch/x86/kernel/cpu/perf_event_intel.c

Merge in the latest fixes before applying new patches, resolve the conflict.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-21 10:57:33 +02:00
Tommi Rantala 8176cced70 perf: Treat attr.config as u64 in perf_swevent_init()
Trinity discovered that we fail to check all 64 bits of
attr.config passed by user space, resulting to out-of-bounds
access of the perf_swevent_enabled array in
sw_perf_event_destroy().

Introduced in commit b0a873ebb ("perf: Register PMU
implementations").

Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: davej@redhat.com
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/1365882554-30259-1-git-send-email-tt.rantala@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-15 11:42:12 +02:00
Anton Arapov a0d60aef4b uretprobes: Remove -ENOSYS as return probes implemented
Enclose return probes implementation.

Signed-off-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-04-13 15:31:58 +02:00
Anton Arapov ded49c5530 uretprobes: Limit the depth of return probe nestedness
Unlike the kretprobes we can't trust userspace, thus must have
protection from user space attacks. User-space have  "unlimited"
stack, and this patch limits the return probes nestedness as a
simple remedy for it.

Note that this implementation leaks return_instance on siglongjmp
until exit()/exec().

The intention is to have KISS and bare minimum solution for the
initial implementation in order to not complicate the uretprobes
code.

In the future we may come up with more sophisticated solution that
remove this depth limitation. It is not easy task and lays beyond
this patchset.

Signed-off-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-04-13 15:31:58 +02:00
Anton Arapov fec8898d86 uretprobes: Return probe exit, invoke handlers
Uretprobe handlers are invoked when the trampoline is hit, on completion
the trampoline is replaced with the saved return address and the uretprobe
instance deleted.

TODO: handle_trampoline() assumes that ->return_instances is always valid.
We should teach it to handle longjmp() which can invalidate the pending
return_instance's. This is nontrivial, we will try to do this in a separate
series.

Signed-off-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-04-13 15:31:57 +02:00
Anton Arapov 0dfd0eb8e4 uretprobes: Return probe entry, prepare_uretprobe()
When a uprobe with return probe consumer is hit, prepare_uretprobe()
function is invoked. It creates return_instance, hijacks return address
and replaces it with the trampoline.

* Return instances are kept as stack per uprobed task.
* Return instance is chained, when the original return address is
  trampoline's page vaddr (e.g. recursive call of the probed function).

Signed-off-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-04-13 15:31:57 +02:00
Anton Arapov e78aebfd27 uretprobes: Reserve the first slot in xol_vma for trampoline
Allocate trampoline page, as the very first one in uprobed
task xol area, and fill it with breakpoint opcode.

Also introduce get_trampoline_vaddr() helper, to wrap the
trampoline address extraction from area->vaddr. That removes
confusion and eases the debug experience in case ->vaddr
notion will be changed.

Signed-off-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-04-13 15:31:54 +02:00
Anton Arapov ea024870cf uretprobes: Introduce uprobe_consumer->ret_handler()
Enclose return probes implementation, introduce ->ret_handler() and update
existing code to rely on ->handler() *and* ->ret_handler() for uprobe and
uretprobe respectively.

Signed-off-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-04-13 15:31:53 +02:00
Wei Yongjun c481420248 perf: Fix error return code
Fix to return -ENOMEM in the allocation error case instead of 0
(if pmu_bus_running == 1), as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Link: http://lkml.kernel.org/r/CAPgLHd8j_fWcgqe%3DKLWjpBj%2B%3Do0Pw6Z-SEq%3DNTPU08c2w1tngQ@mail.gmail.com
[ Tweaked the error code setting placement and the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-12 06:33:56 +02:00
Tejun Heo ef824fa129 perf: make perf_event cgroup hierarchical
perf_event is one of a couple remaining cgroup controllers with broken
hierarchy support.  Converting it to support hierarchy is almost
trivial.  The only thing necessary is to consider a task belonging to
a descendant cgroup as a match.  IOW, if the cgroup of the currently
executing task (@cpuctx->cgrp) equals or is a descendant of the
event's cgroup (@event->cgrp), then the event should be enabled.

Implement hierarchy support and remove .broken_hierarchy tag along
with the incorrect comment on what needs to be done for hierarchy
support.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Stephane Eranian <eranian@google.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
2013-04-10 11:07:16 -07:00
Chen Gang c97847d2f0 perf: Fix strncpy() use, always make sure it's NUL terminated
For NUL terminated string, always make sure that there's '\0' at the end.

In our case we need a return value, so still use strncpy() and
fix up the tail explicitly.

(strlcpy() returns the size, not the pointer)

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: a.p.zijlstra@chello.nl <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org <paulus@samba.org>
Cc: acme@ghostprotocols.net <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/51623E0B.7070101@asianux.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-08 13:26:55 +02:00
Oleg Nesterov 3f47107c5c uprobes: Change write_opcode() to use copy_*page()
Change write_opcode() to use copy_highpage() + copy_to_page()
and simplify the code.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-04-04 13:57:06 +02:00
Oleg Nesterov 5669ccee21 uprobes: Introduce copy_to_page()
Extract the kmap_atomic/memcpy/kunmap_atomic code from
xol_get_insn_slot() into the new simple helper, copy_to_page().
It will have more users soon.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-04-04 13:57:05 +02:00
Oleg Nesterov 98763a1bb1 uprobes: Kill the unnecesary filp != NULL check in __copy_insn()
__copy_insn(filp) can only be called after valid_vma() returns T,
vma->vm_file passed as "filp" can not be NULL.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-04-04 13:57:05 +02:00
Oleg Nesterov 2edb7b5574 uprobes: Change __copy_insn() to use copy_from_page()
Change __copy_insn() to use copy_from_page() and simplify the code.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-04-04 13:57:05 +02:00
Oleg Nesterov ab0d805c7b uprobes: Turn copy_opcode() into copy_from_page()
No functional changes. Rename copy_opcode() into copy_from_page() and
add the new "int len" argument to make it more more generic for the
new users.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-04-04 13:57:04 +02:00
Ananth N Mavinakayanahalli 0908ad6e56 uprobes: Add trap variant helper
Some architectures like powerpc have multiple variants of the trap
instruction. Introduce an additional helper is_trap_insn() for run-time
handling of non-uprobe traps on such architectures.

While there, change is_swbp_at_addr() to is_trap_at_addr() for reading
clarity.

With this change, the uprobe registration path will supercede any trap
instruction inserted at the requested location, while taking care of
delivering the SIGTRAP for cases where the trap notification came in
for an address without a uprobe. See [1] for a more detailed explanation.

[1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-March/104771.html

This change was suggested by Oleg Nesterov.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-04-04 13:57:04 +02:00
Oleg Nesterov f281769e81 uprobes: Use file_inode()
Cleanup. Now that we have f_inode/file_inode() we can use it instead
of vm_file->f_mapping->host.

This should not make any difference for uprobes, but in theory this
change is more correct. We use this inode as a key, to compare it
with uprobe->inode set by uprobe_register(inode), and the caller uses
d_inode.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-04-04 13:57:03 +02:00
Stephane Eranian 2fe85427e3 perf: Add PERF_RECORD_MISC_MMAP_DATA to RECORD_MMAP
Type of mapping was lost and made it hard for a tool
to distinguish code vs. data mmaps. Perf has the ability
to distinguish the two.

Use a bit in the header->misc bitmask to keep track of
the mmap type. If PERF_RECORD_MISC_MMAP_DATA is set then
the mapping is not executable (!VM_EXEC). If not set, then
the mapping is executable.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: ak@linux.intel.com
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: namhyung.kim@lge.com
Link: http://lkml.kernel.org/r/1359040242-8269-16-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:19:02 -03:00
Stephane Eranian d6be9ad6c9 perf: Add generic memory sampling interface
This patch adds PERF_SAMPLE_DATA_SRC.

PERF_SAMPLE_DATA_SRC collects the data source, i.e., where
did the data associated with the sampled instruction
come from. Information is stored in a perf_mem_data_src
structure. It contains opcode, mem level, tlb, snoop,
lock information, subject to availability in hardware.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: ak@linux.intel.com
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: namhyung.kim@lge.com
Link: http://lkml.kernel.org/r/1359040242-8269-8-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:15:59 -03:00
Andi Kleen c3feedf2aa perf/core: Add weighted samples
For some events it's useful to weight sample with a hardware
provided number. This expresses how expensive the action the
sample represent was.  This allows the profiler to scale
the samples to be more informative to the programmer.

There is already the period which is used similarly, but it
means something different, so I chose to not overload it.
Instead a new sample type for WEIGHT is added.

Can be used for multiple things. Initially it is used for TSX
abort costs and profiling by memory latencies (so to make
expensive load appear higher up in the histograms). The concept
is quite generic and can be extended to many other kinds of
events or architectures, as long as the hardware provides
suitable auxillary values. In principle it could be also used
for software tracepoints.

This adds the generic glue. A new optional sample format for a
64-bit weight value.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: namhyung.kim@lge.com
Link: http://lkml.kernel.org/r/1359040242-8269-5-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-04-01 12:15:44 -03:00
Stephane Eranian dd9c086d9f perf: Fix ring_buffer perf_output_space() boundary calculation
This patch fixes a flaw in perf_output_space(). In case the size
of the space needed is bigger than the actual buffer size, there
may be situations where the function would return true (i.e.,
there is space) when it should not. head > offset due to
rounding of the masking logic.

The problem can be tested by activating BTS on Intel processors.
A BTS record can be as big as 16 pages. The following command
fails:

  $ perf record -m 4 -c 1 -e branches:u my_test_program

You will get a buffer corruption with this. Perf report won't be
able to parse the perf.data.

The fix is to first check that the requested space is smaller
than the buffer size. If so, then the masking logic will work
fine. If not, then there is no chance the record can be saved
and it will be gracefully handled by upper code layers.

[ In v2, we also make the logic for the writable more explicit by
  renaming it to rb->overwrite because it tells whether or not the
  buffer can overwrite its tail (suggested by PeterZ). ]

Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: peterz@infradead.org
Cc: jolsa@redhat.com
Cc: fweisbec@gmail.com
Link: http://lkml.kernel.org/r/20130318133327.GA3056@quad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-21 12:04:35 +01:00
Ingo Molnar 3bf2391729 Merge branch 'perf/urgent' into perf/core
Merge in all pending fixes, before pulling the latest development
bits from Arnaldo - which will involve merge conflicts.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-21 11:03:10 +01:00
Namhyung Kim 86e213e1d9 perf/cgroup: Add __percpu annotation to perf_cgroup->info
It's a per-cpu data structure but missed the __percpu annotation.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/1363600594-11453-1-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-18 11:02:06 +01:00
Namhyung Kim d610d98b5d perf: Generate EXIT event only once per task context
perf_event_task_event() iterates pmu list and generate events
for each eligible pmu context.  But if task_event has task_ctx
like in EXIT it'll generate events even though the pmu doesn't
have an eligible one. Fix it by moving the code to proper
places.

Before this patch:

  $ perf record -n true
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.006 MB perf.data (~248 samples) ]

  $ perf report -D | tail
  Aggregated stats:
             TOTAL events:         73
              MMAP events:         67
              COMM events:          2
              EXIT events:          4
  cycles stats:
             TOTAL events:         73
              MMAP events:         67
              COMM events:          2
              EXIT events:          4

After this patch:

  $ perf report -D | tail
  Aggregated stats:
             TOTAL events:         70
              MMAP events:         67
              COMM events:          2
              EXIT events:          1
  cycles stats:
             TOTAL events:         70
              MMAP events:         67
              COMM events:          2
              EXIT events:          1

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363332433-7637-1-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-18 09:47:33 +01:00
Namhyung Kim 778141e3cf perf: Reset hwc->last_period on sw clock events
When cpu/task clock events are initialized, their sampling
frequencies are converted to have a fixed value.  However it
missed to update the hwc->last_period which was set to 1 for
initial sampling frequency calibration.

Because this hwc->last_period value is used as a period in
perf_swevent_ hrtime(), every recorded sample will have an
incorrected period of 1.

  $ perf record -e task-clock noploop 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.158 MB perf.data (~6919 samples) ]

  $ perf report -n --show-total-period  --stdio
  # Samples: 4K of event 'task-clock'
  # Event count (approx.): 4000
  #
  # Overhead       Samples        Period  Command  Shared Object              Symbol
  # ........  ............  ............  .......  .............  ..................
  #
      99.95%          3998          3998  noploop  noploop        [.] main
       0.03%             1             1  noploop  libc-2.15.so   [.] init_cacheinfo
       0.03%             1             1  noploop  ld-2.15.so     [.] open_verify

Note that it doesn't affect the non-sampling event so that the
perf stat still gets correct value with or without this patch.

  $ perf stat -e task-clock noploop 1

   Performance counter stats for 'noploop 1':

         1000.272525 task-clock                #    1.000 CPUs utilized

         1.000560605 seconds time elapsed

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363574507-18808-1-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-18 09:15:18 +01:00
Li Zefan 877c685607 perf: Remove include of cgroup.h from perf_event.h
Move struct perf_cgroup_info and perf_cgroup to
kernel/perf/core.c, and then we can remove include of cgroup.h.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/513568A0.6020804@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-06 11:32:56 +01:00
Sasha Levin b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Tejun Heo 0e9c3be20d events: convert to idr_alloc()
Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:19 -08:00
Linus Torvalds d895cb1af1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
2013-02-26 20:16:07 -08:00
Al Viro 496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Linus Torvalds 8f55cea410 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf changes from Ingo Molnar:
 "There are lots of improvements, the biggest changes are:

  Main kernel side changes:

   - Improve uprobes performance by adding 'pre-filtering' support, by
     Oleg Nesterov.

   - Make some POWER7 events available in sysfs, equivalent to what was
     done on x86, from Sukadev Bhattiprolu.

   - tracing updates by Steve Rostedt - mostly misc fixes and smaller
     improvements.

   - Use perf/event tracing to report PCI Express advanced errors, by
     Tony Luck.

   - Enable northbridge performance counters on AMD family 15h, by Jacob
     Shin.

   - This tracing commit:

        tracing: Remove the extra 4 bytes of padding in events

     changes the ABI.  All involved parties (PowerTop in particular)
     seem to agree that it's safe to do now with the introduction of
     libtraceevent, but the devil is in the details ...

  Main tooling side changes:

   - Add 'event group view', from Namyung Kim:

     To use it, 'perf record' should group events when recording.  And
     then perf report parses the saved group relation from file header
     and prints them together if --group option is provided.  You can
     use the 'perf evlist' command to see event group information:

        $ perf record -e '{ref-cycles,cycles}' noploop 1
        [ perf record: Woken up 2 times to write data ]
        [ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ]

        $ perf evlist --group
        {ref-cycles,cycles}

     With this example, default perf report will show you each event
     separately.

     You can use --group option to enable event group view:

        $ perf report --group
        ...
        # group: {ref-cycles,cycles}
        # ========
        # Samples: 7K of event 'anon group { ref-cycles, cycles }'
        # Event count (approx.): 6876107743
        #
        #         Overhead  Command      Shared Object                      Symbol
        # ................  .......  .................  ..........................
            99.84%  99.76%  noploop  noploop            [.] main
             0.07%   0.00%  noploop  ld-2.15.so         [.] strcmp
             0.03%   0.00%  noploop  [kernel.kallsyms]  [k] timerqueue_del
             0.03%   0.03%  noploop  [kernel.kallsyms]  [k] sched_clock_cpu
             0.02%   0.00%  noploop  [kernel.kallsyms]  [k] account_user_time
             0.01%   0.00%  noploop  [kernel.kallsyms]  [k] __alloc_pages_nodemask
             0.00%   0.00%  noploop  [kernel.kallsyms]  [k] native_write_msr_safe
             0.00%   0.11%  noploop  [kernel.kallsyms]  [k] _raw_spin_lock
             0.00%   0.06%  noploop  [kernel.kallsyms]  [k] find_get_page
             0.00%   0.02%  noploop  [kernel.kallsyms]  [k] rcu_check_callbacks
             0.00%   0.02%  noploop  [kernel.kallsyms]  [k] __current_kernel_time

     As you can see the Overhead column now contains both of ref-cycles
     and cycles and header line shows group information also - 'anon
     group { ref-cycles, cycles }'.  The output is sorted by period of
     group leader first.

   - Initial GTK+ annotate browser, from Namhyung Kim.

   - Add option for runtime switching perf data file in perf report,
     just press 's' and a menu with the valid files found in the current
     directory will be presented, from Feng Tang.

   - Add support to display whole group data for raw columns, from Jiri
     Olsa.

   - Add per processor socket count aggregation in perf stat, from
     Stephane Eranian.

   - Add interval printing in 'perf stat', from Stephane Eranian.

   - 'perf test' improvements

   - Add support for wildcards in tracepoint system name, from Jiri
     Olsa.

   - Add anonymous huge page recognition, from Joshua Zhu.

   - perf build-id cache now can show DSOs present in a perf.data file
     that are not in the cache, to integrate with build-id servers being
     put in place by organizations such as Fedora.

   - perf top now shares more of the evsel config/creation routines with
     'record', paving the way for further integration like 'top'
     snapshots, etc.

   - perf top now supports DWARF callchains.

   - Fix mmap limitations on 32-bit, fix from David Miller.

   - 'perf bench numa mem' NUMA performance measurement suite

   - ... and lots of fixes, performance improvements, cleanups and other
     improvements I failed to list - see the shortlog and git log for
     details."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits)
  perf/x86/amd: Enable northbridge performance counters on AMD family 15h
  perf/hwbp: Fix cleanup in case of kzalloc failure
  perf tools: Fix build with bison 2.3 and older.
  perf tools: Limit unwind support to x86 archs
  perf annotate: Make it to be able to skip unannotatable symbols
  perf gtk/annotate: Fail early if it can't annotate
  perf gtk/annotate: Show source lines with gray color
  perf gtk/annotate: Support multiple event annotation
  perf ui/gtk: Implement basic GTK2 annotation browser
  perf annotate: Fix warning message on a missing vmlinux
  perf buildid-cache: Add --update option
  uprobes/perf: Avoid uprobe_apply() whenever possible
  uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE
  uprobes/perf: Teach trace_uprobe/perf code to pre-filter
  uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's
  uprobes: Introduce uprobe_apply()
  perf: Introduce hw_perf_event->tp_target and ->tp_list
  uprobes/perf: Always increment trace_uprobe->nhit
  uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe
  uprobes/tracing: Introduce is_trace_uprobe_enabled()
  ...
2013-02-19 17:49:41 -08:00
Daniel Baluta 02e176af92 perf/hwbp: Fix cleanup in case of kzalloc failure
Obviously this is a typo and could result in memory leaks if kzalloc
fails on a given cpu.

Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360186160-7566-1-git-send-email-dbaluta@ixiacom.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-14 17:06:39 -03:00
Oleg Nesterov bdf8647c44 uprobes: Introduce uprobe_apply()
Currently it is not possible to change the filtering constraints after
uprobe_register(), so a consumer can not, say, start to trace a task/mm
which was previously filtered out, or remove the no longer needed bp's.

Introduce uprobe_apply() which simply does register_for_each_vma() again
to consult uprobe_consumer->filter() and install/remove the breakpoints.
The only complication is that register_for_each_vma() can no longer
assume that uprobe->consumers should be consulter if is_register == T,
so we change it to accept "struct uprobe_consumer *new" instead.

Unlike uprobe_register(), uprobe_apply(true) doesn't do "unregister" if
register_for_each_vma() fails, it is up to caller to handle the error.

Note: we probably need to cleanup the current interface, it is strange
that uprobe_apply/unregister need inode/offset. We should either change
uprobe_register() to return "struct uprobe *", or add a private ->uprobe
member in uprobe_consumer. And in the long term uprobe_apply() should
take a single argument, uprobe or consumer, even "bool add" should go
away.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-02-08 18:28:04 +01:00
Oleg Nesterov f22c1bb6b4 perf: Introduce hw_perf_event->tp_target and ->tp_list
sys_perf_event_open()->perf_init_event(event) is called before
find_get_context(event), this means that event->ctx == NULL when
class->reg(TRACE_REG_PERF_REGISTER/OPEN) is called and thus it
can't know if this event is per-task or system-wide.

This patch adds hw_perf_event->tp_target for PERF_TYPE_TRACEPOINT,
this is analogous to PERF_TYPE_BREAKPOINT/bp_target we already have.
The patch also moves ->bp_target up so that it can overlap with the
new member, this can help the compiler to generate the better code.

trace_uprobe_register() will use it for prefiltering to avoid the
unnecessary breakpoints in mm's we do not want to trace.

->tp_target doesn't have its own reference, but we can rely on the
fact that either sys_perf_event_open() holds a reference, or it is
equal to event->ctx->task. So this pointer is always valid until
free_event().

Also add the "struct list_head tp_list" into this union. It is not
strictly necessary, but it can simplify the next changes and we can
add it for free.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-02-08 18:28:02 +01:00
Josh Stone e8440c1458 uprobes: Add exports for module use
The original pull message for uprobes (commit 654443e2) noted:

  This tree includes uprobes support in 'perf probe' - but SystemTap
  (and other tools) can take advantage of user probe points as well.

In order to actually be usable in module-based tools like SystemTap, the
interface needs to be exported.  This patch first adds the obvious
exports for uprobe_register and uprobe_unregister.  Then it also adds
one for task_user_regset_view, which is necessary to get the correct
state of userspace registers.

Signed-off-by: Josh Stone <jistone@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-02-08 17:47:13 +01:00
Oleg Nesterov af4355e91f uprobes: Kill the bogus IS_ERR_VALUE(xol_vaddr) check
utask->xol_vaddr is either zero or valid, remove the bogus
IS_ERR_VALUE() check in xol_free_insn_slot().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-02-08 17:47:13 +01:00
Oleg Nesterov 608e7427c0 uprobes: Do not allocate current->utask unnecessary
handle_swbp() does get_utask() before can_skip_sstep() for no reason,
we do not need ->utask if can_skip_sstep() succeeds.

Move get_utask() to pre_ssout() who actually starts to use it. Move
the initialization of utask->active_uprobe/state as well. This way
the whole initialization is consolidated in pre_ssout().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
2013-02-08 17:47:12 +01:00
Oleg Nesterov aba51024e7 uprobes: Fix utask->xol_vaddr leak in pre_ssout()
pre_ssout() should do xol_free_insn_slot() if arch_uprobe_pre_xol()
fails, otherwise nobody will free the allocated slot.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-02-08 17:47:12 +01:00
Oleg Nesterov a6cb3f6d51 uprobes: Do not play with utask in xol_get_insn_slot()
pre_ssout()->xol_get_insn_slot() path is confusing and buggy. This patch
cleanups the code, the next one fixes the bug.

Change xol_get_insn_slot() to only allocate the slot and do nothing more,
move the initialization of utask->xol_vaddr/vaddr into pre_ssout().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-02-08 17:47:12 +01:00
Oleg Nesterov 5a2df662aa uprobes: Turn add_utask() into get_utask()
Rename add_utask() into get_utask() and change it to allocate on
demand to simplify the caller. Like get_xol_area() it will have
more users.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-02-08 17:47:12 +01:00