Commit Graph

144 Commits

Author SHA1 Message Date
Peter Zijlstra b82d9fdd84 sched: avoid large irq-latencies in smp-balancing
SMP balancing is done with IRQs disabled and can iterate the full rq.
When rqs are large this can cause large irq-latencies. Limit the nr of
iterations on each run.

This fixes a scheduling latency regression reported by the -rt folks.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09 22:39:39 +01:00
Eric Dumazet d6322faf29 sched: cleanup, use NSEC_PER_MSEC and NSEC_PER_SEC
1) hardcoded 1000000000 value is used five times in places where
   NSEC_PER_SEC might be more readable.

2) A conversion from nsec to msec uses the hardcoded 1000000 value,
   which is a candidate for NSEC_PER_MSEC.

no code changed:

    text    data     bss     dec     hex filename
   44359    3326      36   47721    ba69 sched.o.before
   44359    3326      36   47721    ba69 sched.o.after

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09 22:39:38 +01:00
Peter Zijlstra b2be5e96dc sched: reintroduce the sched_min_granularity tunable
we lost the sched_min_granularity tunable to a clever optimization
that uses the sched_latency/min_granularity ratio - but the ratio
is quite unintuitive to users and can also crash the kernel if the
ratio is set to 0. So reintroduce the min_granularity tunable,
while keeping the ratio maintained internally.

no functionality changed.

[ mingo@elte.hu: some fixlets. ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09 22:39:37 +01:00
Pavel Emelyanov b488893a39 pid namespaces: changes to show virtual ids to user
This is the largest patch in the set. Make all (I hope) the places where
the pid is shown to or get from user operate on the virtual pids.

The idea is:
 - all in-kernel data structures must store either struct pid itself
   or the pid's global nr, obtained with pid_nr() call;
 - when seeking the task from kernel code with the stored id one
   should use find_task_by_pid() call that works with global pids;
 - when showing pid's numerical value to the user the virtual one
   should be used, but however when one shows task's pid outside this
   task's namespace the global one is to be used;
 - when getting the pid from userspace one need to consider this as
   the virtual one and use appropriate task/pid-searching functions.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: nuther build fix]
[akpm@linux-foundation.org: yet nuther build fix]
[akpm@linux-foundation.org: remove unneeded casts]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:40 -07:00
Serge E. Hallyn b460cbc581 pid namespaces: define is_global_init() and is_container_init()
is_init() is an ambiguous name for the pid==1 check.  Split it into
is_global_init() and is_container_init().

A cgroup init has it's tsk->pid == 1.

A global init also has it's tsk->pid == 1 and it's active pid namespace
is the init_pid_ns.  But rather than check the active pid namespace,
compare the task structure with 'init_pid_ns.child_reaper', which is
initialized during boot to the /sbin/init process and never changes.

Changelog:

	2.6.22-rc4-mm2-pidns1:
	- Use 'init_pid_ns.child_reaper' to determine if a given task is the
	  global init (/sbin/init) process. This would improve performance
	  and remove dependence on the task_pid().

	2.6.21-mm2-pidns2:

	- [Sukadev Bhattiprolu] Changed is_container_init() calls in {powerpc,
	  ppc,avr32}/traps.c for the _exception() call to is_global_init().
	  This way, we kill only the cgroup if the cgroup's init has a
	  bug rather than force a kernel panic.

[akpm@linux-foundation.org: fix comment]
[sukadev@us.ibm.com: Use is_global_init() in arch/m32r/mm/fault.c]
[bunk@stusta.de: kernel/pid.c: remove unused exports]
[sukadev@us.ibm.com: Fix capability.c to work with threaded init]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Acked-by: Pavel Emelianov <xemul@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Herbert Poetzel <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:37 -07:00
Andrew Morgan 72c2d5823f V3 file capabilities: alter behavior of cap_setpcap
The non-filesystem capability meaning of CAP_SETPCAP is that a process, p1,
can change the capabilities of another process, p2.  This is not the
meaning that was intended for this capability at all, and this
implementation came about purely because, without filesystem capabilities,
there was no way to use capabilities without one process bestowing them on
another.

Since we now have a filesystem support for capabilities we can fix the
implementation of CAP_SETPCAP.

The most significant thing about this change is that, with it in effect, no
process can set the capabilities of another process.

The capabilities of a program are set via the capability convolution
rules:

   pI(post-exec) = pI(pre-exec)
   pP(post-exec) = (X(aka cap_bset) & fP) | (pI(post-exec) & fI)
   pE(post-exec) = fE ? pP(post-exec) : 0

at exec() time.  As such, the only influence the pre-exec() program can
have on the post-exec() program's capabilities are through the pI
capability set.

The correct implementation for CAP_SETPCAP (and that enabled by this patch)
is that it can be used to add extra pI capabilities to the current process
- to be picked up by subsequent exec()s when the above convolution rules
are applied.

Here is how it works:

Let's say we have a process, p. It has capability sets, pE, pP and pI.
Generally, p, can change the value of its own pI to pI' where

   (pI' & ~pI) & ~pP = 0.

That is, the only new things in pI' that were not present in pI need to
be present in pP.

The role of CAP_SETPCAP is basically to permit changes to pI beyond
the above:

   if (pE & CAP_SETPCAP) {
      pI' = anything; /* ie., even (pI' & ~pI) & ~pP != 0  */
   }

This capability is useful for things like login, which (say, via
pam_cap) might want to raise certain inheritable capabilities for use
by the children of the logged-in user's shell, but those capabilities
are not useful to or needed by the login program itself.

One such use might be to limit who can run ping. You set the
capabilities of the 'ping' program to be "= cap_net_raw+i", and then
only shells that have (pI & CAP_NET_RAW) will be able to run
it. Without CAP_SETPCAP implemented as described above, login(pam_cap)
would have to also have (pP & CAP_NET_RAW) in order to raise this
capability and pass it on through the inheritable set.

Signed-off-by: Andrew Morgan <morgan@kernel.org>
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:24 -07:00
Eric W. Biederman 7058cb02dd sysctl: deprecate sys_sysctl in a user space visible fashion.
After adding checking to register_sysctl_table and finding a whole new set
of bugs.  Missed by countless code reviews and testers I have finally lost
patience with the binary sysctl interface.

The binary sysctl interface has been sort of deprecated for years and
finding a user space program that uses the syscall is more difficult then
finding a needle in a haystack.  Problems continue to crop up, with the in
kernel implementation.  So since supporting something that no one uses is
silly, deprecate sys_sysctl with a sufficient grace period and notice that
the handful of user space applications that care can be fixed or replaced.

The /proc/sys sysctl interface that people use will continue to be
supported indefinitely.

This patch moves the tested warning about sysctls from the path where
sys_sysctl to a separate path called from both implementations of
sys_sysctl, and it adds a proper entry into
Documentation/feature-removal-schedule.

Allowing us to revisit this in a couple years time and actually kill
sys_sysctl.

[lethal@linux-sh.org: sysctl: Fix syscall disabled build]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:23 -07:00
Eric W. Biederman fc6cd25b73 sysctl: Error on bad sysctl tables
After going through the kernels sysctl tables several times it has become
clear that code review and testing is just not effective in prevent
problematic sysctl tables from being used in the stable kernel.  I certainly
can't seem to fix the problems as fast as they are introduced.

Therefore this patch adds sysctl_check_table which is called when a sysctl
table is registered and checks to see if we have a problematic sysctl table.

The biggest part of the code is the table of valid binary sysctl entries, but
since we have frozen our set of binary sysctls this table should not need to
change, and it makes it much easier to detect when someone unintentionally
adds a new binary sysctl value.

As best as I can determine all of the several hundred errors spewed on boot up
now are legitimate.

[bunk@kernel.org: kernel/sysctl_check.c must #include <linux/string.h>]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:23 -07:00
Eric W. Biederman c65f92398e sysctl: remove the cad_pid binary sysctl path
It looks like we inadvertently killed the cad_pid binary sysctl support when
cap_pid was changed to be a struct pid.  Since no one has complained just
remove the binary path.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:23 -07:00
Eric W. Biederman 35834ca1e4 sysctl: simplify the pty sysctl logic
Instead of having a bunch of ifdefs in sysctl.c move all of the pty sysctl
logic into drivers/char/pty.c

As well as cleaning up the logic this prevents sysctl_check_table from
complaining that the root table has a NULL data pointer on something with
generic methods.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:23 -07:00
Eric W. Biederman 0d135a4a8c sysctl: remove the binary interface for aio-nr, aio-max-nr, acpi_video_flags
aio-nr, aio-max-nr, acpi_video_flags are unsigned long values which sysctl
does not handle properly with a 64bit kernel and a 32bit user space.

Since no one is likely to be using the binary sysctl values and the ascii
interface still works, this patch just removes support for the binary sysctl
interface from the kernel.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:23 -07:00
Eric W. Biederman f5ead5cefc sysctl: remove binary sysctl support where it clearly doesn't work
These functions are all wrapper functions for the proc interface that are
needed for them to work correctly.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Acked-by: Andrew Morgan <morgan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:22 -07:00
Eric W. Biederman 49a0c45833 sysctl: Factor out sysctl_data.
There as been no easy way to wrap the default sysctl strategy routine except
for returning 0.  Which is not always what we want.  The few instances I have
seen that want different behaviour have written their own version of
sysctl_data.  While not too hard it is unnecessary code and has the potential
for extra bugs.

So to make these situations easier and make that part of sysctl more symetric
I have factord sysctl_data out of do_sysctl_strategy and exported as a
function everyone can use.

Further having sysctl_data be an explicit function makes checking for badly
formed sysctl tables much easier.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:22 -07:00
Eric W. Biederman d8217f076b sysctl core: Stop using the unnecessary ctl_table typedef
In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't
needed and is a bit of a nuisance because it makes it harder to recognize
ctl_table is a type name.

So this patch removes it from the generic sysctl code.  Hopefully I will have
enough energy to send the rest of my patches will follow and to remove it from
the rest of the kernel.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:22 -07:00
Ravikiran G Thirumalai c4f3b63fe1 softlockup: add a /proc tuning parameter
Control the trigger limit for softlockup warnings.  This is useful for
debugging softlockups, by lowering the softlockup_thresh to identify
possible softlockups earlier.

This patch:
1. Adds a sysctl softlockup_thresh with valid values of 1-60s
   (Higher value to disable false positives)
2. Changes the softlockup printk to print the cpu softlockup time

[akpm@linux-foundation.org: Fix various warnings and add definition of "two"]
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:47 -07:00
David Rientjes fe071d7e8a oom: add oom_kill_allocating_task sysctl
Adds a new sysctl, 'oom_kill_allocating_task', which will automatically kill
the OOM-triggering task instead of scanning through the tasklist to find a
memory-hogging target.  This is helpful for systems with an insanely large
number of tasks where scanning the tasklist significantly degrades
performance.

Cc: Andrea Arcangeli <andrea@suse.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:46 -07:00
Peter Zijlstra 04fbfdc14e mm: per device dirty threshold
Scale writeback cache per backing device, proportional to its writeout speed.

By decoupling the BDI dirty thresholds a number of problems we currently have
will go away, namely:

 - mutual interference starvation (for any number of BDIs);
 - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts).

It might be that all dirty pages are for a single BDI while other BDIs are
idling. By giving each BDI a 'fair' share of the dirty limit, each one can have
dirty pages outstanding and make progress.

A global threshold also creates a deadlock for stacked BDIs; when A writes to
B, and A generates enough dirty pages to get throttled, B will never start
writeback until the dirty pages go away. Again, by giving each BDI its own
'independent' dirty limit, this problem is avoided.

So the problem is to determine how to distribute the total dirty limit across
the BDIs fairly and efficiently. A DBI that has a large dirty limit but does
not have any dirty pages outstanding is a waste.

What is done is to keep a floating proportion between the DBIs based on
writeback completions. This way faster/more active devices get a larger share
than slower/idle devices.

[akpm@linux-foundation.org: fix warnings]
[hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:45 -07:00
Adam Litke 54f9f80d65 hugetlb: Add hugetlb_dynamic_pool sysctl
The maximum size of the huge page pool can be controlled using the overall
size of the hugetlb filesystem (via its 'size' mount option).  However in the
common case the this will not be set as the pool is traditionally fixed in
size at boot time.  In order to maintain the expected semantics, we need to
prevent the pool expanding by default.

This patch introduces a new sysctl controlling dynamic pool resizing.  When
this is enabled the pool will expand beyond its base size up to the size of
the hugetlb filesystem.  It is disabled by default.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Dave McCracken <dave.mccracken@oracle.com>
Cc: William Irwin <bill.irwin@oracle.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Ken Chen <kenchen@google.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:02 -07:00
Ingo Molnar da84d96176 sched: reintroduce cache-hot affinity
reintroduce a simplified version of cache-hot/cold scheduling
affinity. This improves performance with certain SMP workloads,
such as sysbench.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-15 17:00:18 +02:00
Peter Zijlstra 5f6d858ecc sched: speed up and simplify vslice calculations
speed up and simplify vslice calculations.

[ From: Mike Galbraith <efault@gmx.de>: build fix ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-15 17:00:12 +02:00
Ingo Molnar e22f5bbf86 sched: remove wait_runtime limit
remove the wait_runtime-limit fields and the code depending on it, now
that the math has been changed over to rely on the vruntime metric.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-15 17:00:06 +02:00
Ingo Molnar 8ebc91d936 sched: remove stat_gran
remove the stat_gran code - it was disabled by default and it causes
unnecessary overhead.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-15 17:00:03 +02:00
Al Viro 2b8232ce51 minimal build fixes for uml (fallout from x86 merge)
a) include/asm-um/arch can't just point to include/asm-$(SUBARCH) now
 b) arch/{i386,x86_64}/crypto are merged now
 c) subarch-obj needed changes
 d) cpufeature_64.h should pull "cpufeature_32.h", not <asm/cpufeature_32.h>
    since it can be included from asm-um/cpufeature.h
 e) in case of uml-i386 we need CONFIG_X86_32 for make and gcc, but not
    for Kconfig
 f) sysctl.c shouldn't do vdso_enabled for uml-i386 (actually, that one
    should be registered from corresponding arch/*/kernel/*, with ifdef
    going away; that's a separate patch, though).

With that and with Stephen's patch ("[PATCH net-2.6] uml: hard_header fix")
we have uml allmodconfig building both on i386 and amd64.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13 09:57:15 -07:00
Olof Johansson d0c3d534a4 [POWERPC] Implement logging of unhandled signals
Implement show_unhandled_signals sysctl + support to print when a process
is killed due to unhandled signals just as i386 and x86_64 does.

Default to having it off, unlike x86 that defaults on.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12 14:05:18 +10:00
Ingo Molnar 1799e35d5b sched: add /proc/sys/kernel/sched_compat_yield
add /proc/sys/kernel/sched_compat_yield to make sys_sched_yield()
more agressive, by moving the yielding task to the last position
in the rbtree.

with sched_compat_yield=0:

   PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
  2539 mingo     20   0  1576  252  204 R   50  0.0   0:02.03 loop_yield
  2541 mingo     20   0  1576  244  196 R   50  0.0   0:02.05 loop

with sched_compat_yield=1:

   PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
  2584 mingo     20   0  1576  248  196 R   99  0.0   0:52.45 loop
  2582 mingo     20   0  1576  256  204 R    0  0.0   0:00.00 loop_yield

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2007-09-19 23:34:46 +02:00
Ingo Molnar 172ac3dbb7 sched: cleanup, sched_granularity -> sched_min_granularity
due to adaptive granularity scheduling the role of sched_granularity
has changed to "minimum granularity", so rename the variable (and the
tunable) accordingly.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2007-08-25 18:41:53 +02:00
Peter Zijlstra 218050855e sched: adaptive scheduler granularity
Instead of specifying the preemption granularity, specify the wanted
latency. By fixing the granlarity to a constany the wakeup latency
it a function of the number of running tasks on the rq.

Invert this relation.

sysctl_sched_granularity becomes a minimum for the dynamic granularity
computed from the new sysctl_sched_latency.

Then use this latency to do more intelligent granularity decisions: if
there are fewer tasks running then we can schedule coarser. This helps
performance while still always keeping the latency target.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-25 18:41:53 +02:00
Peter Zijlstra 1fc84aaae3 sched: fix CONFIG_SCHED_DEBUG dependency of lockdep sysctls
Make the lockdep sysctls not depend on CONFIG_SCHED_DEBUG.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-25 18:41:52 +02:00
Christian Heim e598fbaabd Remove double inclusion of linux/capability.h
Remove the second inclusion of linux/capability.h, which has been
introduced with "[PATCH] move capable() to capability.h" (commit
c59ede7b78)

Signed-off-by: Christian Heim <phreak@gentoo.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-19 10:12:32 -07:00
Lee Schermerhorn 8daec965e7 Fix missing numa_zonelist_order sysctl
Misplaced #endif is hiding the numa_zonelist_order sysctl when !SECURITY.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:40 -07:00
Len Brown 673d5b43da ACPI: restore CONFIG_ACPI_SLEEP
Restore the 2.6.22 CONFIG_ACPI_SLEEP build option, but now shadowing the
new CONFIG_PM_SLEEP option.

Signed-off-by: Len Brown <len.brown@intel.com>
[ Modified to work with the PM config setup changes. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 16:53:59 -07:00
Len Brown e8b2fd0122 ACPI: Kconfig: remove CONFIG_ACPI_SLEEP from source
As it was a synonym for (CONFIG_ACPI && CONFIG_X86),
the ifdefs for it were more clutter than they were worth.

For ia64, just add a few stubs in anticipation of future
S3 or S4 support.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-25 01:29:39 -04:00
Masoud Asgharifard Sharbiani abd4f7505b x86: i386-show-unhandled-signals-v3
This patch makes the i386 behave the same way that x86_64 does when a
segfault happens.  A line gets printed to the kernel log so that tools
that need to check for failures can behave more uniformly between
debug.show_unhandled_signals sysctl variable to 0 (or by doing echo 0 >
/proc/sys/debug/exception-trace)

Also, all of the lines being printed are now using printk_ratelimit() to
deny the ability of DoS from a local user with a program like the
following:

main()
{
       while (1)
               if (!fork()) *(int *)0 = 0;
}

This new revision also includes the fix that Andrew did which got rid of
new sysctl that was added to the system in earlier versions of this.
Also, 'show-unhandled-signals' sysctl has been renamed back to the old
'exception-trace' to avoid breakage of people's scripts.

AK: Enabling by default for i386 will be likely controversal, but let's see what happens
AK: Really folks, before complaining just fix your segfaults
AK: I bet this will find a lot of silent issues

Signed-off-by: Masoud Sharbiani <masouds@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
[ Personally, I've found the complaints useful on x86-64, so I'm all for
  this. That said, I wonder if we could do it more prettily..   -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22 11:03:37 -07:00
Andrew Morton ed2c12f323 kernel/sysctl.c: finish off the warning comments
I've been chasing these comments around this file all week.  Hopefully we're
straight now.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:57 -07:00
Peter Zijlstra f20786ff4d lockstat: core infrastructure
Introduce the core lock statistics code.

Lock statistics provides lock wait-time and hold-time (as well as the count
of corresponding contention and acquisitions events). Also, the first few
call-sites that encounter contention are tracked.

Lock wait-time is the time spent waiting on the lock. This provides insight
into the locking scheme, that is, a heavily contended lock is indicative of
a too coarse locking scheme.

Lock hold-time is the duration the lock was held, this provides a reference for
the wait-time numbers, so they can be put into perspective.

  1)
    lock
  2)
    ... do stuff ..
    unlock
  3)

The time between 1 and 2 is the wait-time. The time between 2 and 3 is the
hold-time.

The lockdep held-lock tracking code is reused, because it already collects locks
into meaningful groups (classes), and because it is an existing infrastructure
for lock instrumentation.

Currently lockdep tracks lock acquisition with two hooks:

  lock()
    lock_acquire()
    _lock()

 ... code protected by lock ...

  unlock()
    lock_release()
    _unlock()

We need to extend this with two more hooks, in order to measure contention.

  lock_contended() - used to measure contention events
  lock_acquired()  - completion of the contention

These are then placed the following way:

  lock()
    lock_acquire()
    if (!_try_lock())
      lock_contended()
      _lock()
      lock_acquired()

 ... do locked stuff ...

  unlock()
    lock_release()
    _unlock()

(Note: the try_lock() 'trick' is used to avoid instrumenting all platform
       dependent lock primitive implementations.)

It is also possible to toggle the two lockdep features at runtime using:

  /proc/sys/kernel/prove_locking
  /proc/sys/kernel/lock_stat

(esp. turning off the O(n^2) prove_locking functionaliy can help)

[akpm@linux-foundation.org: build fixes]
[akpm@linux-foundation.org: nuke unneeded ifdefs]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:49 -07:00
Kawai, Hidehiro 76fdbb25f9 coredump masking: bound suid_dumpable sysctl
This patch series is version 5 of the core dump masking feature, which
controls which VMAs should be dumped based on their memory types and
per-process flags.

I adopted most of Andrew's suggestion at the previous version.  He also
suggested using system call instead of /proc/<pid>/ interface, I decided to
use the latter continuously because adding new system call with pid argument
will give a big impact on the kernel.

You can access the per-process flags via /proc/<pid>/coredump_filter
interface.  coredump_filter represents a bitmask of memory types, and if a bit
is set, VMAs of corresponding memory type are written into a core file when
the process is dumped.  The bitmask is inherited from the parent process when
a process is created.

The original purpose is to avoid longtime system slowdown when a number of
processes which share a huge shared memory are dumped at the same time.  To
achieve this purpose, this patch series adds an ability to suppress dumping
anonymous shared memory for specified processes.  In this version, three other
memory types are also supported.

Here are the coredump_filter bits:
  bit 0: anonymous private memory
  bit 1: anonymous shared memory
  bit 2: file-backed private memory
  bit 3: file-backed shared memory

The default value of coredump_filter is 0x3.  This means the new core dump
routine has the same behavior as conventional behavior by default.

In this version, coredump_filter bits and mm.dumpable are merged into
mm.flags, and it is accessed by atomic bitops.

The supported core file formats are ELF and ELF-FDPIC.  ELF has been tested,
but ELF-FDPIC has not been built and tested because I don't have the test
environment.

This patch limits a value of suid_dumpable sysctl to the range of 0 to 2.

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:46 -07:00
Peter Zijlstra bdf4c48af2 audit: rework execve audit
The purpose of audit_bprm() is to log the argv array to a userspace daemon at
the end of the execve system call.  Since user-space hasn't had time to run,
this array is still in pristine state on the process' stack; so no need to
copy it, we can just grab it from there.

In order to minimize the damage to audit_log_*() copy each string into a
temporary kernel buffer first.

Currently the audit code requires that the full argument vector fits in a
single packet.  So currently it does clip the argv size to a (sysctl) limit,
but only when execve auditing is enabled.

If the audit protocol gets extended to allow for multiple packets this check
can be removed.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ollie Wild <aaw@google.com>
Cc: <linux-audit@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:45 -07:00
Pavel Machek 77afcf78a2 PM: Integrate beeping flag with existing acpi_sleep flags
Move "debug during resume from s2ram" into the variable we already use
for real-mode flags to simplify code. It also closes nasty trap for
the user in acpi_sleep_setup; order of parameters actually mattered there,
acpi_sleep=s3_bios,s3_mode doing something different from
acpi_sleep=s3_mode,s3_bios.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:43 -07:00
Jeremy Fitzhardinge 10a0a8d4e3 Add common orderly_poweroff()
Various pieces of code around the kernel want to be able to trigger an
orderly poweroff.  This pulls them together into a single
implementation.

By default the poweroff command is /sbin/poweroff, but it can be set
via sysctl: kernel/poweroff_cmd.  This is split at whitespace, so it
can include command-line arguments.

This patch replaces four other instances of invoking either "poweroff"
or "shutdown -h now": two sbus drivers, and acpi thermal
management.

sparc64 has its own "powerd"; still need to determine whether it should
be replaced by orderly_poweroff().

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Acked-by: Len Brown <lenb@kernel.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David S. Miller <davem@davemloft.net>
2007-07-18 08:47:40 -07:00
Adrian Bunk 62239ac2b3 proper prototype for proc_nr_files()
Add a proper prototype for proc_nr_files() in include/linux/fs.h

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:03 -07:00
Mel Gorman 396faf0303 Allow huge page allocations to use GFP_HIGH_MOVABLE
Huge pages are not movable so are not allocated from ZONE_MOVABLE.  However,
as ZONE_MOVABLE will always have pages that can be migrated or reclaimed, it
can be used to satisfy hugepage allocations even when the system has been
running a long time.  This allows an administrator to resize the hugepage pool
at runtime depending on the size of ZONE_MOVABLE.

This patch adds a new sysctl called hugepages_treat_as_movable.  When a
non-zero value is written to it, future allocations for the huge page pool
will use ZONE_MOVABLE.  Despite huge pages being non-movable, we do not
introduce additional external fragmentation of note as huge pages are always
the largest contiguous block we care about.

[akpm@linux-foundation.org: various fixes]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:22:59 -07:00
Linus Torvalds 7144521f5a Remove duplicate comments from sysctl.c
Randy Dunlap noticed that the recent comment clarifications from Andrew
had somehow gotten duplicated.  Quoth Andrew: "hm, that could have been
some late-night reject-fixing."

Fix it up.

Cc: From: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 11:50:38 -07:00
Andrew Morton 2be7fe075a sysctl.c: add text telling people to use CTL_UNNUMBERED
Hopefully this will help people to understand the new regime.

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:49 -07:00
Ingo Molnar 45807a1df9 vdso: print fatal signals
Add the print-fatal-signals=1 boot option and the
/proc/sys/kernel/print-fatal-signals runtime switch.

This feature prints some minimal information about userspace segfaults to
the kernel console.  This is useful to find early bootup bugs where
userspace debugging is very hard.

Defaults to off.

[akpm@linux-foundation.org: Don't add new sysctl numbers]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:43 -07:00
KAMEZAWA Hiroyuki f0c0b2b808 change zonelist order: zonelist order selection logic
Make zonelist creation policy selectable from sysctl/boot option v6.

This patch makes NUMA's zonelist (of pgdat) order selectable.
Available order are Default(automatic)/ Node-based / Zone-based.

[Default Order]
The kernel selects Node-based or Zone-based order automatically.

[Node-based Order]
This policy treats the locality of memory as the most important parameter.
Zonelist order is created by each zone's locality. This means lower zones
(ex. ZONE_DMA) can be used before higher zone (ex. ZONE_NORMAL) exhausion.
IOW. ZONE_DMA will be in the middle of zonelist.
current 2.6.21 kernel uses this.

Pros.
 * A user can expect local memory as much as possible.
Cons.
 * lower zone will be exhansted before higher zone. This may cause OOM_KILL.

Maybe suitable if ZONE_DMA is relatively big and you never see OOM_KILL
because of ZONE_DMA exhaution and you need the best locality.

(example)
assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL.

*node(0)'s memory allocation order:

 node(0)'s NORMAL -> node(0)'s DMA -> node(1)'s NORMAL.

*node(1)'s memory allocation order:

 node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA.

[Zone-based order]
This policy treats the zone type as the most important parameter.
Zonelist order is created by zone-type order. This means lower zone
never be used bofere higher zone exhaustion.
IOW. ZONE_DMA will be always at the tail of zonelist.

Pros.
 * OOM_KILL(bacause of lower zone) occurs only if the whole zones are exhausted.
Cons.
 * memory locality may not be best.

(example)
assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL.

*node(0)'s memory allocation order:

 node(0)'s NORMAL -> node(1)'s NORMAL -> node(0)'s DMA.

*node(1)'s memory allocation order:

 node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA.

bootoption "numa_zonelist_order=" and proc/sysctl is supporetd.

command:
%echo N > /proc/sys/vm/numa_zonelist_order

Will rebuild zonelist in Node-based order.

command:
%echo Z > /proc/sys/vm/numa_zonelist_order

Will rebuild zonelist in Zone-based order.

Thanks to Lee Schermerhorn, he gives me much help and codes.

[Lee.Schermerhorn@hp.com: add check_highest_zone to build_zonelists_in_zone_order]
[akpm@linux-foundation.org: build fix]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "jesse.barnes@intel.com" <jesse.barnes@intel.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:35 -07:00
Eric Paris ed03218951 security: Protection for exploiting null dereference using mmap
Add a new security check on mmap operations to see if the user is attempting
to mmap to low area of the address space.  The amount of space protected is
indicated by the new proc tunable /proc/sys/vm/mmap_min_addr and defaults to
0, preserving existing behavior.

This patch uses a new SELinux security class "memprotect."  Policy already
contains a number of allow rules like a_t self:process * (unconfined_t being
one of them) which mean that putting this check in the process class (its
best current fit) would make it useless as all user processes, which we also
want to protect against, would be allowed. By taking the memprotect name of
the new class it will also make it possible for us to move some of the other
memory protect permissions out of 'process' and into the new class next time
we bump the policy version number (which I also think is a good future idea)

Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2007-07-11 22:52:29 -04:00
Ingo Molnar 77e54a1f88 sched: add CFS debug sysctls
add CFS debug sysctls: only tweakable if SCHED_DEBUG is enabled.
This allows for faster debugging of scheduler problems.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09 18:52:00 +02:00
Dan Aloni 71ce92f3fa make sysctl/kernel/core_pattern and fs/exec.c agree on maximum core filename size
Make sysctl/kernel/core_pattern and fs/exec.c agree on maximum core
filename size and change it to 128, so that extensive patterns such as
'/local/cores/%e-%h-%s-%t-%p.core' won't result in truncated filename
generation.

Signed-off-by: Dan Aloni <da-x@monatomic.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17 05:23:05 -07:00
Christoph Lameter 77461ab332 Make vm statistics update interval configurable
Make it configurable.  Code in mm makes the vm statistics intervals
independent from the cache reaper use that opportunity to make it
configurable.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:56 -07:00
Kees Cook 5096add84b proc: maps protection
The /proc/pid/ "maps", "smaps", and "numa_maps" files contain sensitive
information about the memory location and usage of processes.  Issues:

- maps should not be world-readable, especially if programs expect any
  kind of ASLR protection from local attackers.
- maps cannot just be 0400 because "-D_FORTIFY_SOURCE=2 -O2" makes glibc
  check the maps when %n is in a *printf call, and a setuid(getuid())
  process wouldn't be able to read its own maps file.  (For reference
  see http://lkml.org/lkml/2006/1/22/150)
- a system-wide toggle is needed to allow prior behavior in the case of
  non-root applications that depend on access to the maps contents.

This change implements a check using "ptrace_may_attach" before allowing
access to read the maps contents.  To control this protection, the new knob
/proc/sys/kernel/maps_protect has been added, with corresponding updates to
the procfs documentation.

[akpm@linux-foundation.org: build fixes]
[akpm@linux-foundation.org: New sysctl numbers are old hat]
Signed-off-by: Kees Cook <kees@outflux.net>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:02 -07:00