Commit Graph

29 Commits

Author SHA1 Message Date
Maarten ter Huurne c5c9c2df4d regulator: act8865: Configure register access for act8600
This can be used to expose the act8600 registers via debugfs.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-28 12:34:20 -07:00
Maarten ter Huurne 005e46857e regulator: act8865: Pass of_node via act8865_regulator_data
This makes the code easier to read and it avoids a dynamic memory
allocation.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-28 12:34:20 -07:00
Maarten ter Huurne e6e79fd9ce regulator: act8865: Remove "too many regulators" error handler
The check would dereference pdata, which can be NULL in the non-DT
use case.

Nothing will break if pdata->num_regulators is larger than the number
of regulators that the driver defines: pdata->num_regulators is only
read in act8865_get_init_data() to iterate through pdata->regulators.

The error handler might have some value as a sanity check on the
platform data, but the platform data could be broken in many other
ways that are not checked for (unknown IDs, duplicate IDs), so I see
no reason to perform only this specific check.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-21 17:52:07 +00:00
Maarten ter Huurne de14ba6737 regulator: act8865: Remove redundant dev lookups
The local variable "dev" already contains a pointer to the device,
so there is no need to take the address of "client->dev" again.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-21 17:52:07 +00:00
Maarten ter Huurne 79b5d0266a regulator: act8865: Specify fixed voltage of 3.3V for ACT8600's REG9
The documentation lists both 1.8V and 3.3V for this regulator output,
but 3.3V is mentioned more often and also matches what JZ4770 and
JZ4780 expect as an input.

Note that the voltage of REG9 is not programmable, so this commit only
changes the voltage reported in sysfs and debugfs, not the actual
output voltage of the hardware.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-29 20:33:46 +09:00
Maarten ter Huurne 30f065bf1f regulator: act8865: Rename platform_data field to init_data
Make the field name match its type.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-29 20:33:46 +09:00
Maarten ter Huurne abea1bb08c regulator: act8865: Remove "static" from local variable
There is no need to preserve its value between calls. I guess this
was a copy-paste slip-up.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-29 20:33:44 +09:00
Wenyou Yang c86dc03e54 regulator: act8865: support output voltage by VSET2[] bits
For the step-down DC/DC regulators, the output voltage is
selectable by setting VSEL pin that when VSEL is low, output
voltage is programmed by VSET1[] bits, and when VSEL is high,
output voltage is programmed by VSET2[] bits.

The DT property "active-semi,vsel-high" is used to specify
the VSEL pin at high on the board.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 17:53:24 +01:00
Krzysztof Kozlowski a807a6cc29 regulator: drivers: Drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-14 18:53:01 +01:00
Heiko Stuebner c8b263cc03 regulator: act8865: add input supply handling
The act88600/act8846/act8865 regulators have a number of input supplies
supplying the individual regulators. This may even be recursively like on
most Rockchip boards using the act8846 where REG4 is most of the time
connected to the inl1-supply.

Therefore add the ability to specify the input supplies for the individual inputs.
The input-names are taken from the datasheets of act8600, act8846 and act8865.
On the act8600 some regulators do not have separate input supplies.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07 16:32:28 +00:00
Zubair Lutfullah Kakakhel df3a950e4e regulator: act8865: Add act8600 support
This patch adds act8600 support to the act8865 driver.

VBUS and USB charger supported by this chip can be added later

Tested on MIPS Creator CI20

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-06 19:43:28 +00:00
Romain Perier 8f73110f6b of: Rename "poweroff-source" property to "system-power-controller"
It reverts commit a4b4e0461e ("of: Add standard property for poweroff capability").
As discussed on the mailing list, it makes more sense to rename back to the
old established property name, without the vendor prefix. Problem being that
the word "source" usually tends to be used for inputs and that is out of control
of the OS. The poweroff capability is an output which simply turns the
system-power off. Also, this property might be used by drivers which power-off
the system and power back on subsequent RTC alarms. This seems to suggest to
remove "poweroff" from the property name and to choose "system-power-controller"
as the more generic name. This patchs adds the required renaming changes and
defines an helper function which checks if this property is set.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-01 19:33:44 +00:00
Romain Perier 2b17fa2825 regulator: act8865: Add support to turn off all outputs
When the property "poweroff-source" is found in the
devicetree, the function pm_power_off is defined. This function sends the
rights bit fields to the global off control register. shutdown/poweroff
commands are now supported for hardware components which use these PMU.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-22 16:59:52 +01:00
Beniamino Galvani 34e0247ffc regulator: act8865: fix build when OF is not enabled
act8846_matches and act8865_matches are defined only when OF is
enabled. Move references to them to the act8865_pdata_from_dt()
function to avoid a build error when OF is disabled.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-05 18:02:54 +01:00
Beniamino Galvani ac0c0ea8b6 regulator: act8865: add support for act8846
Add device id and definition of registers and regulators to support
the act8846 PMU.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Tested-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-05 18:02:53 +01:00
Beniamino Galvani 50a03e35b0 regulator: act8865: prepare support for other act88xx devices
This patch prepares support for other devices in the act88xx family of
PMUs manufactured by Active-Semi.

http://www.active-semi.com/products/power-management-units/act88xx/

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Tested-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-05 18:02:52 +01:00
Beniamino Galvani bbb83f38a8 regulator: act8865: set correct number of regulators in pdata
act8865_pdata_from_dt() populates the array pdata->regulators with all
the regulators and then assigns the field init_data only for the ones
actually found in the DT.

The patch changes the value assigned to pdata->num_regulators to match
the size of the array.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Tested-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-05 18:02:52 +01:00
Axel Lin 40d3bc1966 regulator: act8865: Remove error variable in act8865_pmic_probe
Simply use ret variable instead.
Also remove unneeded initialize for ret variable.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-05 18:02:52 +01:00
Beniamino Galvani 48a1e1b50d regulator: act8865: fix parsing of platform data
The driver loops through all available regulators (ACT8865_REG_NUM)
and accesses pdata->regulators[i].platform_data without checking the
actual value of num_regulators in platform data, potentially causing a
invalid memory access.

Fix this and look up the regulator init_data by id in platform data.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Tested-by Wenyou.Yang <wenyou.yang@atmel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-05 18:02:51 +01:00
Axel Lin fb8eb45400 regulator: act8865: Remove unnecessary *rdev[] from struct act8865
Now we are using devm_regulator_register(), so we don't need the *rdev[] array
to store return value of devm_regulator_register. Use a *rdev variable is
enough for checking return status.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Wenyou Yang <Wenyou.yang@atmel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-10 10:30:21 +00:00
Sachin Kamat 5ee77ef27e regulator: act8865: Remove redundant error message
kzalloc prints its own OOM message upon failure.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20 01:35:31 +09:00
Sachin Kamat 0079eb53c0 regulator: act8865: Add missing of_node_put
Add of_node_put to decrement the ref count.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-18 10:56:51 +09:00
Sachin Kamat 6ea970a9be regulator: act8865: Use of_get_child_by_name
of_find_node_by_name walks the allnodes list, and can thus walk
outside of the parent node. Use of_get_child_by_name instead.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-14 21:14:36 +00:00
Axel Lin a8659ba461 regulator: act8865: Fix build error when !OF
Fix below build error when !OF:
  CC [M]  drivers/regulator/act8865-regulator.o
drivers/regulator/act8865-regulator.c: In function 'act8865_pmic_probe':
drivers/regulator/act8865-regulator.c:306:18: error: 'act8865_matches' undeclared (first use in this function)
drivers/regulator/act8865-regulator.c:306:18: note: each undeclared identifier is reported only once for each function it appears in
drivers/regulator/act8865-regulator.c:306:18: error: negative width in bit-field '<anonymous>'
make[2]: *** [drivers/regulator/act8865-regulator.o] Error 1
make[1]: *** [drivers/regulator] Error 2
make: *** [drivers] Error 2

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06 12:12:07 +00:00
Wenyou Yang d04b755273 regulator: act8865: register all regulators regardless of how many are used
As Mark pointed out, the driver should register all regulators
regardless of how many are used in the system in order to aid diagnostics.

But in the previous patch, only register the regulators that are used.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31 13:05:55 +00:00
Wenyou Yang f1de2c2f27 regulator: act8865: fix incorrect devm_kzalloc for act8865
Which cause to allocate more needless memory.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-30 12:06:55 +00:00
Axel Lin 7da98aafa2 regulator: act8865: Remove set_suspend_[en|dis]able implementation
There is no suspend enable/disable settings mentioned in datasheet,
so just don't implement .set_suspend_[en|dis]able callbacks.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-30 12:01:33 +00:00
Axel Lin d5e17e2634 regulator: act8865: Remove unneeded regulator_unregister() calls
This is not required because current code use devm_regulator_register() to
register regulators.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-30 11:59:12 +00:00
Wenyou Yang 33036f48d1 regulator: act8865: add PMIC act8865 driver
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-24 13:47:40 +00:00